Subversion Repositories dashGPS

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
30 1342 d 6 h mjames /trunk/ Updated error check for remote I2C device failure..  
29 1342 d 7 h mjames / Added power down to I2C1 bus - used a GPIO pin to power the low-power bus devices .  
28 1343 d 1 h mjames / Setup to use I2C1 for the external I2C bus.  
27 1355 d 4 h mjames / Added watchdog timer,
Updated to use new serial driver code.		  
26 1475 d 10 h mjames / Modified for two BME280 sensors.  
25 1480 d 7 h mjames / Improved average speed.  
24 1482 d 10 h mjames / Reducing the rate of buffer overflows.  
23 1483 d 2 h mjames /trunk/ Altered buffer size, and start up of speed averaging code.
Need to drop baud rate from 115200 as this is causing buffer overflow.		  
22 1483 d 6 h mjames / Updated to new STM32 lib API for UART  
21 1493 d 11 h mjames / Updated to add encoder push button and encoder pins for dial  
14 1543 d 2 h mjames /trunk/Core/Src/ Reduced temperature read to every 5 secs  
13 1715 d 10 h mjames /trunk/ Update to provide USB CDC UART access for debug/logging.  
12 1715 d 11 h mjames /trunk/Core/Src/ Increased measurement rate on temperature to 2Hz  
11 1715 d 13 h mjames /trunk/ Added BMP280 sensor, and changed serial API  
9 1771 d 5 h mjames /trunk/ Updated to show time, correctly read GPS data when buffer overflows.  
8 1774 d 0 h mjames /trunk/ Displays a small display  
6 1777 d 0 h mjames /trunk/ Added call-out from C to C++ to allow using libOLED C++ library  
5 1780 d 0 h mjames /trunk/ Added SSD1306 display configuration and library use  
2 1784 d 1 h mjames /trunk/ First commit - code setup to get code into NMEA handler