Subversion Repositories FuelGauge

Rev

Rev 3 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /**
  2.   ******************************************************************************
  3.   * @file    stm32f0xx_hal_conf.h
  4.   * @brief   HAL configuration file.
  5.   ******************************************************************************
  6.   * @attention
  7.   *
  8.   * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  9.   * All rights reserved.</center></h2>
  10.   *
  11.   * This software component is licensed by ST under BSD 3-Clause license,
  12.   * the "License"; You may not use this file except in compliance with the
  13.   * License. You may obtain a copy of the License at:
  14.   *                        opensource.org/licenses/BSD-3-Clause
  15.   *
  16.   ******************************************************************************
  17.   */
  18.  
  19. /* Define to prevent recursive inclusion -------------------------------------*/
  20. #ifndef __STM32F0xx_HAL_CONF_H
  21. #define __STM32F0xx_HAL_CONF_H
  22.  
  23. #ifdef __cplusplus
  24.  extern "C" {
  25. #endif
  26.  
  27. /* Exported types ------------------------------------------------------------*/
  28. /* Exported constants --------------------------------------------------------*/
  29.  
  30. /* ########################## Module Selection ############################## */
  31. /**
  32.   * @brief This is the list of modules to be used in the HAL driver
  33.   */
  34. #define HAL_MODULE_ENABLED
  35.   #define HAL_ADC_MODULE_ENABLED
  36. /*#define HAL_CRYP_MODULE_ENABLED   */
  37. /*#define HAL_CAN_MODULE_ENABLED   */
  38. /*#define HAL_CEC_MODULE_ENABLED   */
  39. /*#define HAL_COMP_MODULE_ENABLED   */
  40. /*#define HAL_CRC_MODULE_ENABLED   */
  41. /*#define HAL_CRYP_MODULE_ENABLED   */
  42. /*#define HAL_TSC_MODULE_ENABLED   */
  43. /*#define HAL_DAC_MODULE_ENABLED   */
  44. /*#define HAL_I2S_MODULE_ENABLED   */
  45. /*#define HAL_IWDG_MODULE_ENABLED   */
  46. /*#define HAL_LCD_MODULE_ENABLED   */
  47. /*#define HAL_LPTIM_MODULE_ENABLED   */
  48. /*#define HAL_RNG_MODULE_ENABLED   */
  49. /*#define HAL_RTC_MODULE_ENABLED   */
  50. #define HAL_SPI_MODULE_ENABLED
  51. #define HAL_TIM_MODULE_ENABLED
  52. #define HAL_UART_MODULE_ENABLED
  53. /*#define HAL_USART_MODULE_ENABLED   */
  54. /*#define HAL_IRDA_MODULE_ENABLED   */
  55. /*#define HAL_SMARTCARD_MODULE_ENABLED   */
  56. /*#define HAL_SMBUS_MODULE_ENABLED   */
  57. /*#define HAL_WWDG_MODULE_ENABLED   */
  58. /*#define HAL_PCD_MODULE_ENABLED   */
  59. #define HAL_CORTEX_MODULE_ENABLED
  60. #define HAL_DMA_MODULE_ENABLED
  61. #define HAL_FLASH_MODULE_ENABLED
  62. #define HAL_GPIO_MODULE_ENABLED
  63. #define HAL_EXTI_MODULE_ENABLED
  64. #define HAL_PWR_MODULE_ENABLED
  65. #define HAL_RCC_MODULE_ENABLED
  66. #define HAL_I2C_MODULE_ENABLED
  67.  
  68. /* ########################## HSE/HSI Values adaptation ##################### */
  69. /**
  70.   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
  71.   *        This value is used by the RCC HAL module to compute the system frequency
  72.   *        (when HSE is used as system clock source, directly or through the PLL).
  73.   */
  74. #if !defined  (HSE_VALUE)
  75.   #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
  76. #endif /* HSE_VALUE */
  77.  
  78. /**
  79.   * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
  80.   *        Timeout value
  81.   */
  82. #if !defined  (HSE_STARTUP_TIMEOUT)
  83.   #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
  84. #endif /* HSE_STARTUP_TIMEOUT */
  85.  
  86. /**
  87.   * @brief Internal High Speed oscillator (HSI) value.
  88.   *        This value is used by the RCC HAL module to compute the system frequency
  89.   *        (when HSI is used as system clock source, directly or through the PLL).
  90.   */
  91. #if !defined  (HSI_VALUE)
  92.   #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
  93. #endif /* HSI_VALUE */
  94.  
  95. /**
  96.   * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
  97.   *        Timeout value
  98.   */
  99. #if !defined  (HSI_STARTUP_TIMEOUT)
  100.  #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */
  101. #endif /* HSI_STARTUP_TIMEOUT */
  102.  
  103. /**
  104.   * @brief Internal High Speed oscillator for ADC (HSI14) value.
  105.   */
  106. #if !defined  (HSI14_VALUE)
  107. #define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
  108.                                              The real value may vary depending on the variations
  109.                                              in voltage and temperature.  */
  110. #endif /* HSI14_VALUE */
  111.  
  112. /**
  113.   * @brief Internal High Speed oscillator for USB (HSI48) value.
  114.   */
  115. #if !defined  (HSI48_VALUE)
  116.   #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
  117.                                              The real value may vary depending on the variations
  118.                                              in voltage and temperature.  */
  119. #endif /* HSI48_VALUE */
  120.  
  121. /**
  122.   * @brief Internal Low Speed oscillator (LSI) value.
  123.   */
  124. #if !defined  (LSI_VALUE)
  125.   #define LSI_VALUE  ((uint32_t)40000)
  126. #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
  127.                                              The real value may vary depending on the variations
  128.                                              in voltage and temperature.  */
  129. /**
  130.   * @brief External Low Speed oscillator (LSI) value.
  131.   */
  132. #if !defined  (LSE_VALUE)
  133.   #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
  134. #endif /* LSE_VALUE */
  135.  
  136. /**
  137.   * @brief Time out for LSE start up value in ms.
  138.   */
  139. #if !defined  (LSE_STARTUP_TIMEOUT)
  140.   #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
  141. #endif /* LSE_STARTUP_TIMEOUT */
  142.  
  143. /* Tip: To avoid modifying this file each time you need to use different HSE,
  144.    ===  you can define the HSE value in your toolchain compiler preprocessor. */
  145.  
  146. /* ########################### System Configuration ######################### */
  147. /**
  148.   * @brief This is the HAL system configuration section
  149.   */
  150. #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
  151. #define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */
  152.                                                                               /*  Warning: Must be set to higher priority for HAL_Delay()  */
  153.                                                                               /*  and HAL_GetTick() usage under interrupt context          */
  154. #define  USE_RTOS                     0
  155. #define  PREFETCH_ENABLE              1
  156. #define  INSTRUCTION_CACHE_ENABLE     0
  157. #define  DATA_CACHE_ENABLE            0
  158. #define  USE_SPI_CRC                     0U
  159.  
  160. #define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
  161. #define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
  162. #define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
  163. #define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
  164. #define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
  165. #define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
  166. #define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
  167. #define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
  168. #define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
  169. #define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
  170. #define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
  171. #define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
  172. #define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
  173. #define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
  174. #define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
  175. #define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
  176. #define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
  177. #define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
  178.  
  179. /* ########################## Assert Selection ############################## */
  180. /**
  181.   * @brief Uncomment the line below to expanse the "assert_param" macro in the
  182.   *        HAL drivers code
  183.   */
  184. /* #define USE_FULL_ASSERT   1U */
  185.  
  186. /* Includes ------------------------------------------------------------------*/
  187. /**
  188.   * @brief Include module's header file
  189.   */
  190.  
  191. #ifdef HAL_RCC_MODULE_ENABLED
  192.  #include "stm32f0xx_hal_rcc.h"
  193. #endif /* HAL_RCC_MODULE_ENABLED */
  194.  
  195. #ifdef HAL_GPIO_MODULE_ENABLED
  196.  #include "stm32f0xx_hal_gpio.h"
  197. #endif /* HAL_GPIO_MODULE_ENABLED */
  198.  
  199. #ifdef HAL_EXTI_MODULE_ENABLED
  200.   #include "stm32f0xx_hal_exti.h"
  201. #endif /* HAL_EXTI_MODULE_ENABLED */
  202.  
  203. #ifdef HAL_DMA_MODULE_ENABLED
  204.   #include "stm32f0xx_hal_dma.h"
  205. #endif /* HAL_DMA_MODULE_ENABLED */
  206.  
  207. #ifdef HAL_CORTEX_MODULE_ENABLED
  208.  #include "stm32f0xx_hal_cortex.h"
  209. #endif /* HAL_CORTEX_MODULE_ENABLED */
  210.  
  211. #ifdef HAL_ADC_MODULE_ENABLED
  212.  #include "stm32f0xx_hal_adc.h"
  213. #endif /* HAL_ADC_MODULE_ENABLED */
  214.  
  215. #ifdef HAL_CAN_MODULE_ENABLED
  216.  #include "stm32f0xx_hal_can.h"
  217. #endif /* HAL_CAN_MODULE_ENABLED */
  218.  
  219. #ifdef HAL_CEC_MODULE_ENABLED
  220.  #include "stm32f0xx_hal_cec.h"
  221. #endif /* HAL_CEC_MODULE_ENABLED */
  222.  
  223. #ifdef HAL_COMP_MODULE_ENABLED
  224.  #include "stm32f0xx_hal_comp.h"
  225. #endif /* HAL_COMP_MODULE_ENABLED */
  226.  
  227. #ifdef HAL_CRC_MODULE_ENABLED
  228.  #include "stm32f0xx_hal_crc.h"
  229. #endif /* HAL_CRC_MODULE_ENABLED */
  230.  
  231. #ifdef HAL_DAC_MODULE_ENABLED
  232.  #include "stm32f0xx_hal_dac.h"
  233. #endif /* HAL_DAC_MODULE_ENABLED */
  234.  
  235. #ifdef HAL_FLASH_MODULE_ENABLED
  236.  #include "stm32f0xx_hal_flash.h"
  237. #endif /* HAL_FLASH_MODULE_ENABLED */
  238.  
  239. #ifdef HAL_I2C_MODULE_ENABLED
  240.  #include "stm32f0xx_hal_i2c.h"
  241. #endif /* HAL_I2C_MODULE_ENABLED */
  242.  
  243. #ifdef HAL_I2S_MODULE_ENABLED
  244.  #include "stm32f0xx_hal_i2s.h"
  245. #endif /* HAL_I2S_MODULE_ENABLED */
  246.  
  247. #ifdef HAL_IRDA_MODULE_ENABLED
  248.  #include "stm32f0xx_hal_irda.h"
  249. #endif /* HAL_IRDA_MODULE_ENABLED */
  250.  
  251. #ifdef HAL_IWDG_MODULE_ENABLED
  252.  #include "stm32f0xx_hal_iwdg.h"
  253. #endif /* HAL_IWDG_MODULE_ENABLED */
  254.  
  255. #ifdef HAL_PCD_MODULE_ENABLED
  256.  #include "stm32f0xx_hal_pcd.h"
  257. #endif /* HAL_PCD_MODULE_ENABLED */
  258.  
  259. #ifdef HAL_PWR_MODULE_ENABLED
  260.  #include "stm32f0xx_hal_pwr.h"
  261. #endif /* HAL_PWR_MODULE_ENABLED */
  262.  
  263. #ifdef HAL_RTC_MODULE_ENABLED
  264.  #include "stm32f0xx_hal_rtc.h"
  265. #endif /* HAL_RTC_MODULE_ENABLED */
  266.  
  267. #ifdef HAL_SMARTCARD_MODULE_ENABLED
  268.  #include "stm32f0xx_hal_smartcard.h"
  269. #endif /* HAL_SMARTCARD_MODULE_ENABLED */
  270.  
  271. #ifdef HAL_SMBUS_MODULE_ENABLED
  272.  #include "stm32f0xx_hal_smbus.h"
  273. #endif /* HAL_SMBUS_MODULE_ENABLED */
  274.  
  275. #ifdef HAL_SPI_MODULE_ENABLED
  276.  #include "stm32f0xx_hal_spi.h"
  277. #endif /* HAL_SPI_MODULE_ENABLED */
  278.  
  279. #ifdef HAL_TIM_MODULE_ENABLED
  280.  #include "stm32f0xx_hal_tim.h"
  281. #endif /* HAL_TIM_MODULE_ENABLED */
  282.  
  283. #ifdef HAL_TSC_MODULE_ENABLED
  284.  #include "stm32f0xx_hal_tsc.h"
  285. #endif /* HAL_TSC_MODULE_ENABLED */
  286.  
  287. #ifdef HAL_UART_MODULE_ENABLED
  288.  #include "stm32f0xx_hal_uart.h"
  289. #endif /* HAL_UART_MODULE_ENABLED */
  290.  
  291. #ifdef HAL_USART_MODULE_ENABLED
  292.  #include "stm32f0xx_hal_usart.h"
  293. #endif /* HAL_USART_MODULE_ENABLED */
  294.  
  295. #ifdef HAL_WWDG_MODULE_ENABLED
  296.  #include "stm32f0xx_hal_wwdg.h"
  297. #endif /* HAL_WWDG_MODULE_ENABLED */
  298.  
  299. /* Exported macro ------------------------------------------------------------*/
  300. #ifdef  USE_FULL_ASSERT
  301. /**
  302.   * @brief  The assert_param macro is used for function's parameters check.
  303.   * @param  expr If expr is false, it calls assert_failed function
  304.   *         which reports the name of the source file and the source
  305.   *         line number of the call that failed.
  306.   *         If expr is true, it returns no value.
  307.   * @retval None
  308.   */
  309.   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
  310. /* Exported functions ------------------------------------------------------- */
  311.   void assert_failed(uint8_t* file, uint32_t line);
  312. #else
  313.   #define assert_param(expr) ((void)0U)
  314. #endif /* USE_FULL_ASSERT */
  315.  
  316. #ifdef __cplusplus
  317. }
  318. #endif
  319.  
  320. #endif /* __STM32F0xx_HAL_CONF_H */
  321.  
  322. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
  323.