Subversion Repositories canSerial

Rev

Rev 2 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /**
  2.   ******************************************************************************
  3.   * @file    stm32f1xx_ll_i2c.c
  4.   * @author  MCD Application Team
  5.   * @brief   I2C LL module driver.
  6.   ******************************************************************************
  7.   * @attention
  8.   *
  9.   * Copyright (c) 2016 STMicroelectronics.
  10.   * All rights reserved.
  11.   *
  12.   * This software is licensed under terms that can be found in the LICENSE file
  13.   * in the root directory of this software component.
  14.   * If no LICENSE file comes with this software, it is provided AS-IS.
  15.   *
  16.   ******************************************************************************
  17.   */
  18. #if defined(USE_FULL_LL_DRIVER)
  19.  
  20. /* Includes ------------------------------------------------------------------*/
  21. #include "stm32f1xx_ll_i2c.h"
  22. #include "stm32f1xx_ll_bus.h"
  23. #include "stm32f1xx_ll_rcc.h"
  24. #ifdef  USE_FULL_ASSERT
  25. #include "stm32_assert.h"
  26. #else
  27. #define assert_param(expr) ((void)0U)
  28. #endif
  29.  
  30. /** @addtogroup STM32F1xx_LL_Driver
  31.   * @{
  32.   */
  33.  
  34. #if defined (I2C1) || defined (I2C2)
  35.  
  36. /** @defgroup I2C_LL I2C
  37.   * @{
  38.   */
  39.  
  40. /* Private types -------------------------------------------------------------*/
  41. /* Private variables ---------------------------------------------------------*/
  42. /* Private constants ---------------------------------------------------------*/
  43. /* Private macros ------------------------------------------------------------*/
  44. /** @addtogroup I2C_LL_Private_Macros
  45.   * @{
  46.   */
  47.  
  48. #define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__)    (((__VALUE__) == LL_I2C_MODE_I2C)          || \
  49.                                                  ((__VALUE__) == LL_I2C_MODE_SMBUS_HOST)   || \
  50.                                                  ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \
  51.                                                  ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP))
  52.  
  53. #define IS_LL_I2C_CLOCK_SPEED(__VALUE__)           (((__VALUE__) > 0U) && ((__VALUE__) <= LL_I2C_MAX_SPEED_FAST))
  54.  
  55. #define IS_LL_I2C_DUTY_CYCLE(__VALUE__)            (((__VALUE__) == LL_I2C_DUTYCYCLE_2) || \
  56.                                                  ((__VALUE__) == LL_I2C_DUTYCYCLE_16_9))
  57.  
  58. #define IS_LL_I2C_OWN_ADDRESS1(__VALUE__)       ((__VALUE__) <= 0x000003FFU)
  59.  
  60. #define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__)   (((__VALUE__) == LL_I2C_ACK) || \
  61.                                                  ((__VALUE__) == LL_I2C_NACK))
  62.  
  63. #define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__)       (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \
  64.                                                  ((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT))
  65. /**
  66.   * @}
  67.   */
  68.  
  69. /* Private function prototypes -----------------------------------------------*/
  70.  
  71. /* Exported functions --------------------------------------------------------*/
  72. /** @addtogroup I2C_LL_Exported_Functions
  73.   * @{
  74.   */
  75.  
  76. /** @addtogroup I2C_LL_EF_Init
  77.   * @{
  78.   */
  79.  
  80. /**
  81.   * @brief  De-initialize the I2C registers to their default reset values.
  82.   * @param  I2Cx I2C Instance.
  83.   * @retval An ErrorStatus enumeration value:
  84.   *          - SUCCESS  I2C registers are de-initialized
  85.   *          - ERROR  I2C registers are not de-initialized
  86.   */
  87. uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx)
  88. {
  89.   ErrorStatus status = SUCCESS;
  90.  
  91.   /* Check the I2C Instance I2Cx */
  92.   assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
  93.  
  94.   if (I2Cx == I2C1)
  95.   {
  96.     /* Force reset of I2C clock */
  97.     LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1);
  98.  
  99.     /* Release reset of I2C clock */
  100.     LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1);
  101.   }
  102. #if defined(I2C2)
  103.   else if (I2Cx == I2C2)
  104.   {
  105.     /* Force reset of I2C clock */
  106.     LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2);
  107.  
  108.     /* Release reset of I2C clock */
  109.     LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2);
  110.  
  111.   }
  112. #endif /* I2C2 */
  113.   else
  114.   {
  115.     status = ERROR;
  116.   }
  117.  
  118.   return status;
  119. }
  120.  
  121. /**
  122.   * @brief  Initialize the I2C registers according to the specified parameters in I2C_InitStruct.
  123.   * @param  I2Cx I2C Instance.
  124.   * @param  I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure.
  125.   * @retval An ErrorStatus enumeration value:
  126.   *          - SUCCESS  I2C registers are initialized
  127.   *          - ERROR  Not applicable
  128.   */
  129. uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct)
  130. {
  131.   LL_RCC_ClocksTypeDef rcc_clocks;
  132.  
  133.   /* Check the I2C Instance I2Cx */
  134.   assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
  135.  
  136.   /* Check the I2C parameters from I2C_InitStruct */
  137.   assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode));
  138.   assert_param(IS_LL_I2C_CLOCK_SPEED(I2C_InitStruct->ClockSpeed));
  139.   assert_param(IS_LL_I2C_DUTY_CYCLE(I2C_InitStruct->DutyCycle));
  140.   assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1));
  141.   assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge));
  142.   assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize));
  143.  
  144.   /* Disable the selected I2Cx Peripheral */
  145.   LL_I2C_Disable(I2Cx);
  146.  
  147.   /* Retrieve Clock frequencies */
  148.   LL_RCC_GetSystemClocksFreq(&rcc_clocks);
  149.  
  150.   /*---------------------------- I2Cx SCL Clock Speed Configuration ------------
  151.    * Configure the SCL speed :
  152.    * - ClockSpeed: I2C_CR2_FREQ[5:0], I2C_TRISE_TRISE[5:0], I2C_CCR_FS,
  153.    *           and I2C_CCR_CCR[11:0] bits
  154.    * - DutyCycle: I2C_CCR_DUTY[7:0] bits
  155.    */
  156.   LL_I2C_ConfigSpeed(I2Cx, rcc_clocks.PCLK1_Frequency, I2C_InitStruct->ClockSpeed, I2C_InitStruct->DutyCycle);
  157.  
  158.   /*---------------------------- I2Cx OAR1 Configuration -----------------------
  159.    * Disable, Configure and Enable I2Cx device own address 1 with parameters :
  160.    * - OwnAddress1:  I2C_OAR1_ADD[9:8], I2C_OAR1_ADD[7:1] and I2C_OAR1_ADD0 bits
  161.    * - OwnAddrSize:  I2C_OAR1_ADDMODE bit
  162.    */
  163.   LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize);
  164.  
  165.   /*---------------------------- I2Cx MODE Configuration -----------------------
  166.   * Configure I2Cx peripheral mode with parameter :
  167.    * - PeripheralMode: I2C_CR1_SMBUS, I2C_CR1_SMBTYPE and I2C_CR1_ENARP bits
  168.    */
  169.   LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode);
  170.  
  171.   /* Enable the selected I2Cx Peripheral */
  172.   LL_I2C_Enable(I2Cx);
  173.  
  174.   /*---------------------------- I2Cx CR2 Configuration ------------------------
  175.    * Configure the ACKnowledge or Non ACKnowledge condition
  176.    * after the address receive match code or next received byte with parameter :
  177.    * - TypeAcknowledge: I2C_CR2_NACK bit
  178.    */
  179.   LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge);
  180.  
  181.   return SUCCESS;
  182. }
  183.  
  184. /**
  185.   * @brief  Set each @ref LL_I2C_InitTypeDef field to default value.
  186.   * @param  I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure.
  187.   * @retval None
  188.   */
  189. void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct)
  190. {
  191.   /* Set I2C_InitStruct fields to default values */
  192.   I2C_InitStruct->PeripheralMode  = LL_I2C_MODE_I2C;
  193.   I2C_InitStruct->ClockSpeed      = 5000U;
  194.   I2C_InitStruct->DutyCycle       = LL_I2C_DUTYCYCLE_2;
  195.   I2C_InitStruct->OwnAddress1     = 0U;
  196.   I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK;
  197.   I2C_InitStruct->OwnAddrSize     = LL_I2C_OWNADDRESS1_7BIT;
  198. }
  199.  
  200. /**
  201.   * @}
  202.   */
  203.  
  204. /**
  205.   * @}
  206.   */
  207.  
  208. /**
  209.   * @}
  210.   */
  211.  
  212. #endif /* I2C1 || I2C2 */
  213.  
  214. /**
  215.   * @}
  216.   */
  217.  
  218. #endif /* USE_FULL_LL_DRIVER */
  219.  
  220.