Subversion Repositories dashGPS

Rev

Blame | Last modification | View Log | Download | RSS feed

  1. /**
  2.   ******************************************************************************
  3.   * @file    stm32f1xx_hal_mmc.c
  4.   * @author  MCD Application Team
  5.   * @brief   MMC card HAL module driver.
  6.   *          This file provides firmware functions to manage the following
  7.   *          functionalities of the Secure Digital (MMC) peripheral:
  8.   *           + Initialization and de-initialization functions
  9.   *           + IO operation functions
  10.   *           + Peripheral Control functions
  11.   *           + MMC card Control functions
  12.   *
  13.   @verbatim
  14.   ==============================================================================
  15.                         ##### How to use this driver #####
  16.   ==============================================================================
  17.   [..]
  18.     This driver implements a high level communication layer for read and write from/to
  19.     this memory. The needed STM32 hardware resources (SDMMC and GPIO) are performed by
  20.     the user in HAL_MMC_MspInit() function (MSP layer).
  21.     Basically, the MSP layer configuration should be the same as we provide in the
  22.     examples.
  23.     You can easily tailor this configuration according to hardware resources.
  24.  
  25.   [..]
  26.     This driver is a generic layered driver for SDMMC memories which uses the HAL
  27.     SDMMC driver functions to interface with MMC and eMMC cards devices.
  28.     It is used as follows:
  29.  
  30.     (#)Initialize the SDMMC low level resources by implement the HAL_MMC_MspInit() API:
  31.         (##) Enable the SDMMC interface clock using __HAL_RCC_SDMMC_CLK_ENABLE();
  32.         (##) SDMMC pins configuration for MMC card
  33.             (+++) Enable the clock for the SDMMC GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();
  34.             (+++) Configure these SDMMC pins as alternate function pull-up using HAL_GPIO_Init()
  35.                   and according to your pin assignment;
  36.         (##) DMA Configuration if you need to use DMA process (HAL_MMC_ReadBlocks_DMA()
  37.              and HAL_MMC_WriteBlocks_DMA() APIs).
  38.             (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
  39.             (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
  40.         (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
  41.             (+++) Configure the SDMMC and DMA interrupt priorities using function HAL_NVIC_SetPriority();
  42.                   DMA priority is superior to SDMMC's priority
  43.             (+++) Enable the NVIC DMA and SDMMC IRQs using function HAL_NVIC_EnableIRQ()
  44.             (+++) SDMMC interrupts are managed using the macros __HAL_MMC_ENABLE_IT()
  45.                   and __HAL_MMC_DISABLE_IT() inside the communication process.
  46.             (+++) SDMMC interrupts pending bits are managed using the macros __HAL_MMC_GET_IT()
  47.                   and __HAL_MMC_CLEAR_IT()
  48.         (##) NVIC configuration if you need to use interrupt process (HAL_MMC_ReadBlocks_IT()
  49.              and HAL_MMC_WriteBlocks_IT() APIs).
  50.             (+++) Configure the SDMMC interrupt priorities using function HAL_NVIC_SetPriority();
  51.             (+++) Enable the NVIC SDMMC IRQs using function HAL_NVIC_EnableIRQ()
  52.             (+++) SDMMC interrupts are managed using the macros __HAL_MMC_ENABLE_IT()
  53.                   and __HAL_MMC_DISABLE_IT() inside the communication process.
  54.             (+++) SDMMC interrupts pending bits are managed using the macros __HAL_MMC_GET_IT()
  55.                   and __HAL_MMC_CLEAR_IT()
  56.     (#) At this stage, you can perform MMC read/write/erase operations after MMC card initialization
  57.  
  58.  
  59.   *** MMC Card Initialization and configuration ***
  60.   ================================================
  61.   [..]
  62.     To initialize the MMC Card, use the HAL_MMC_Init() function. It Initializes
  63.     SDMMC Peripheral (STM32 side) and the MMC Card, and put it into StandBy State (Ready for data transfer).
  64.     This function provide the following operations:
  65.  
  66.     (#) Initialize the SDMMC peripheral interface with defaullt configuration.
  67.         The initialization process is done at 400KHz. You can change or adapt
  68.         this frequency by adjusting the "ClockDiv" field.
  69.         The MMC Card frequency (SDMMC_CK) is computed as follows:
  70.  
  71.            SDMMC_CK = SDMMCCLK / (ClockDiv + 2)
  72.  
  73.         In initialization mode and according to the MMC Card standard,
  74.         make sure that the SDMMC_CK frequency doesn't exceed 400KHz.
  75.  
  76.         This phase of initialization is done through SDMMC_Init() and
  77.         SDMMC_PowerState_ON() SDMMC low level APIs.
  78.  
  79.     (#) Initialize the MMC card. The API used is HAL_MMC_InitCard().
  80.         This phase allows the card initialization and identification
  81.         and check the MMC Card type (Standard Capacity or High Capacity)
  82.         The initialization flow is compatible with MMC standard.
  83.  
  84.         This API (HAL_MMC_InitCard()) could be used also to reinitialize the card in case
  85.         of plug-off plug-in.
  86.  
  87.     (#) Configure the MMC Card Data transfer frequency. By Default, the card transfer
  88.         frequency is set to 24MHz. You can change or adapt this frequency by adjusting
  89.         the "ClockDiv" field.
  90.         In transfer mode and according to the MMC Card standard, make sure that the
  91.         SDMMC_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
  92.         To be able to use a frequency higher than 24MHz, you should use the SDMMC
  93.         peripheral in bypass mode. Refer to the corresponding reference manual
  94.         for more details.
  95.  
  96.     (#) Select the corresponding MMC Card according to the address read with the step 2.
  97.  
  98.     (#) Configure the MMC Card in wide bus mode: 4-bits data.
  99.  
  100.   *** MMC Card Read operation ***
  101.   ==============================
  102.   [..]
  103.     (+) You can read from MMC card in polling mode by using function HAL_MMC_ReadBlocks().
  104.         This function support only 512-bytes block length (the block size should be
  105.         chosen as 512 bytes).
  106.         You can choose either one block read operation or multiple block read operation
  107.         by adjusting the "NumberOfBlocks" parameter.
  108.         After this, you have to ensure that the transfer is done correctly. The check is done
  109.         through HAL_MMC_GetCardState() function for MMC card state.
  110.  
  111.     (+) You can read from MMC card in DMA mode by using function HAL_MMC_ReadBlocks_DMA().
  112.         This function support only 512-bytes block length (the block size should be
  113.         chosen as 512 bytes).
  114.         You can choose either one block read operation or multiple block read operation
  115.         by adjusting the "NumberOfBlocks" parameter.
  116.         After this, you have to ensure that the transfer is done correctly. The check is done
  117.         through HAL_MMC_GetCardState() function for MMC card state.
  118.         You could also check the DMA transfer process through the MMC Rx interrupt event.
  119.  
  120.     (+) You can read from MMC card in Interrupt mode by using function HAL_MMC_ReadBlocks_IT().
  121.         This function allows the read of 512 bytes blocks.
  122.         You can choose either one block read operation or multiple block read operation
  123.         by adjusting the "NumberOfBlocks" parameter.
  124.         After this, you have to ensure that the transfer is done correctly. The check is done
  125.         through HAL_MMC_GetCardState() function for MMC card state.
  126.         You could also check the IT transfer process through the MMC Rx interrupt event.
  127.  
  128.   *** MMC Card Write operation ***
  129.   ===============================
  130.   [..]
  131.     (+) You can write to MMC card in polling mode by using function HAL_MMC_WriteBlocks().
  132.         This function support only 512-bytes block length (the block size should be
  133.         chosen as 512 bytes).
  134.         You can choose either one block read operation or multiple block read operation
  135.         by adjusting the "NumberOfBlocks" parameter.
  136.         After this, you have to ensure that the transfer is done correctly. The check is done
  137.         through HAL_MMC_GetCardState() function for MMC card state.
  138.  
  139.     (+) You can write to MMC card in DMA mode by using function HAL_MMC_WriteBlocks_DMA().
  140.         This function support only 512-bytes block length (the block size should be
  141.         chosen as 512 byte).
  142.         You can choose either one block read operation or multiple block read operation
  143.         by adjusting the "NumberOfBlocks" parameter.
  144.         After this, you have to ensure that the transfer is done correctly. The check is done
  145.         through HAL_MMC_GetCardState() function for MMC card state.
  146.         You could also check the DMA transfer process through the MMC Tx interrupt event.  
  147.  
  148.     (+) You can write to MMC card in Interrupt mode by using function HAL_MMC_WriteBlocks_IT().
  149.         This function allows the read of 512 bytes blocks.
  150.         You can choose either one block read operation or multiple block read operation
  151.         by adjusting the "NumberOfBlocks" parameter.
  152.         After this, you have to ensure that the transfer is done correctly. The check is done
  153.         through HAL_MMC_GetCardState() function for MMC card state.
  154.         You could also check the IT transfer process through the MMC Tx interrupt event.
  155.  
  156.   *** MMC card information ***
  157.   ===========================
  158.   [..]
  159.     (+) To get MMC card information, you can use the function HAL_MMC_GetCardInfo().
  160.         It returns useful information about the MMC card such as block size, card type,
  161.         block number ...
  162.  
  163.   *** MMC card CSD register ***
  164.   ============================
  165.   [..]
  166.     (+) The HAL_MMC_GetCardCSD() API allows to get the parameters of the CSD register.
  167.         Some of the CSD parameters are useful for card initialization and identification.
  168.  
  169.   *** MMC card CID register ***
  170.   ============================
  171.   [..]
  172.     (+) The HAL_MMC_GetCardCID() API allows to get the parameters of the CID register.
  173.         Some of the CID parameters are useful for card initialization and identification.
  174.  
  175.   *** MMC HAL driver macros list ***
  176.   ==================================
  177.   [..]
  178.     Below the list of most used macros in MMC HAL driver.
  179.  
  180.     (+) __HAL_MMC_ENABLE : Enable the MMC device
  181.     (+) __HAL_MMC_DISABLE : Disable the MMC device
  182.     (+) __HAL_MMC_DMA_ENABLE: Enable the SDMMC DMA transfer
  183.     (+) __HAL_MMC_DMA_DISABLE: Disable the SDMMC DMA transfer
  184.     (+) __HAL_MMC_ENABLE_IT: Enable the MMC device interrupt
  185.     (+) __HAL_MMC_DISABLE_IT: Disable the MMC device interrupt
  186.     (+) __HAL_MMC_GET_FLAG:Check whether the specified MMC flag is set or not
  187.     (+) __HAL_MMC_CLEAR_FLAG: Clear the MMC's pending flags
  188.  
  189.   [..]
  190.     (@) You can refer to the MMC HAL driver header file for more useful macros
  191.  
  192.   *** Callback registration ***
  193.   =============================================
  194.   [..]
  195.     The compilation define USE_HAL_MMC_REGISTER_CALLBACKS when set to 1
  196.     allows the user to configure dynamically the driver callbacks.
  197.  
  198.     Use Functions @ref HAL_MMC_RegisterCallback() to register a user callback,
  199.     it allows to register following callbacks:
  200.       (+) TxCpltCallback : callback when a transmission transfer is completed.
  201.       (+) RxCpltCallback : callback when a reception transfer is completed.
  202.       (+) ErrorCallback : callback when error occurs.
  203.       (+) AbortCpltCallback : callback when abort is completed.
  204.       (+) MspInitCallback    : MMC MspInit.
  205.       (+) MspDeInitCallback  : MMC MspDeInit.
  206.     This function takes as parameters the HAL peripheral handle, the Callback ID
  207.     and a pointer to the user callback function.
  208.  
  209.     Use function @ref HAL_MMC_UnRegisterCallback() to reset a callback to the default
  210.     weak (surcharged) function. It allows to reset following callbacks:
  211.       (+) TxCpltCallback : callback when a transmission transfer is completed.
  212.       (+) RxCpltCallback : callback when a reception transfer is completed.
  213.       (+) ErrorCallback : callback when error occurs.
  214.       (+) AbortCpltCallback : callback when abort is completed.
  215.       (+) MspInitCallback    : MMC MspInit.
  216.       (+) MspDeInitCallback  : MMC MspDeInit.
  217.     This function) takes as parameters the HAL peripheral handle and the Callback ID.
  218.  
  219.     By default, after the @ref HAL_MMC_Init and if the state is HAL_MMC_STATE_RESET
  220.     all callbacks are reset to the corresponding legacy weak (surcharged) functions.
  221.     Exception done for MspInit and MspDeInit callbacks that are respectively
  222.     reset to the legacy weak (surcharged) functions in the @ref HAL_MMC_Init
  223.     and @ref  HAL_MMC_DeInit only when these callbacks are null (not registered beforehand).
  224.     If not, MspInit or MspDeInit are not null, the @ref HAL_MMC_Init and @ref HAL_MMC_DeInit
  225.     keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
  226.  
  227.     Callbacks can be registered/unregistered in READY state only.
  228.     Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
  229.     in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used
  230.     during the Init/DeInit.
  231.     In that case first register the MspInit/MspDeInit user callbacks
  232.     using @ref HAL_MMC_RegisterCallback before calling @ref HAL_MMC_DeInit
  233.     or @ref HAL_MMC_Init function.
  234.  
  235.     When The compilation define USE_HAL_MMC_REGISTER_CALLBACKS is set to 0 or
  236.     not defined, the callback registering feature is not available
  237.     and weak (surcharged) callbacks are used.
  238.  
  239.   @endverbatim
  240.   ******************************************************************************
  241.   * @attention
  242.   *
  243.   * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
  244.   * All rights reserved.</center></h2>
  245.   *
  246.   * This software component is licensed by ST under BSD 3-Clause license,
  247.   * the "License"; You may not use this file except in compliance with the
  248.   * License. You may obtain a copy of the License at:
  249.   *                       opensource.org/licenses/BSD-3-Clause
  250.   *
  251.   ******************************************************************************
  252.   */
  253.  
  254. /* Includes ------------------------------------------------------------------*/
  255. #include "stm32f1xx_hal.h"
  256.  
  257. /** @addtogroup STM32F1xx_HAL_Driver
  258.   * @{
  259.   */
  260.  
  261. /** @defgroup MMC MMC
  262.   * @brief MMC HAL module driver
  263.   * @{
  264.   */
  265.  
  266. #ifdef HAL_MMC_MODULE_ENABLED
  267.  
  268. #if defined(SDIO)
  269.  
  270. /* Private typedef -----------------------------------------------------------*/
  271. /* Private define ------------------------------------------------------------*/
  272. /** @addtogroup MMC_Private_Defines
  273.   * @{
  274.   */
  275.  
  276. /**
  277.   * @}
  278.   */
  279.  
  280. /* Private macro -------------------------------------------------------------*/
  281. /* Private variables ---------------------------------------------------------*/
  282. /* Private function prototypes -----------------------------------------------*/
  283. /* Private functions ---------------------------------------------------------*/
  284. /** @defgroup MMC_Private_Functions MMC Private Functions
  285.   * @{
  286.   */
  287. static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc);
  288. static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc);
  289. static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus);
  290. static void     MMC_PowerOFF(MMC_HandleTypeDef *hmmc);
  291. static void     MMC_Write_IT(MMC_HandleTypeDef *hmmc);
  292. static void     MMC_Read_IT(MMC_HandleTypeDef *hmmc);
  293. static void     MMC_DMATransmitCplt(DMA_HandleTypeDef *hdma);
  294. static void     MMC_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
  295. static void     MMC_DMAError(DMA_HandleTypeDef *hdma);
  296. static void     MMC_DMATxAbort(DMA_HandleTypeDef *hdma);
  297. static void     MMC_DMARxAbort(DMA_HandleTypeDef *hdma);
  298. /**
  299.   * @}
  300.   */
  301. /* Exported functions --------------------------------------------------------*/
  302. /** @addtogroup MMC_Exported_Functions
  303.   * @{
  304.   */
  305.  
  306. /** @addtogroup MMC_Exported_Functions_Group1
  307.  *  @brief   Initialization and de-initialization functions
  308.  *
  309. @verbatim
  310.   ==============================================================================
  311.           ##### Initialization and de-initialization functions #####
  312.   ==============================================================================
  313.   [..]
  314.     This section provides functions allowing to initialize/de-initialize the MMC
  315.     card device to be ready for use.
  316.  
  317. @endverbatim
  318.   * @{
  319.   */
  320.  
  321. /**
  322.   * @brief  Initializes the MMC according to the specified parameters in the
  323.             MMC_HandleTypeDef and create the associated handle.
  324.   * @param  hmmc: Pointer to the MMC handle
  325.   * @retval HAL status
  326.   */
  327. HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc)
  328. {
  329.   /* Check the MMC handle allocation */
  330.   if(hmmc == NULL)
  331.   {
  332.     return HAL_ERROR;
  333.   }
  334.  
  335.   /* Check the parameters */
  336.   assert_param(IS_SDIO_ALL_INSTANCE(hmmc->Instance));
  337.   assert_param(IS_SDIO_CLOCK_EDGE(hmmc->Init.ClockEdge));
  338.   assert_param(IS_SDIO_CLOCK_BYPASS(hmmc->Init.ClockBypass));
  339.   assert_param(IS_SDIO_CLOCK_POWER_SAVE(hmmc->Init.ClockPowerSave));
  340.   assert_param(IS_SDIO_BUS_WIDE(hmmc->Init.BusWide));
  341.   assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(hmmc->Init.HardwareFlowControl));
  342.   assert_param(IS_SDIO_CLKDIV(hmmc->Init.ClockDiv));
  343.  
  344.   if(hmmc->State == HAL_MMC_STATE_RESET)
  345.   {
  346.     /* Allocate lock resource and initialize it */
  347.     hmmc->Lock = HAL_UNLOCKED;
  348. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  349.     /* Reset Callback pointers in HAL_MMC_STATE_RESET only */
  350.     hmmc->TxCpltCallback    = HAL_MMC_TxCpltCallback;
  351.     hmmc->RxCpltCallback    = HAL_MMC_RxCpltCallback;
  352.     hmmc->ErrorCallback     = HAL_MMC_ErrorCallback;
  353.     hmmc->AbortCpltCallback = HAL_MMC_AbortCallback;
  354.  
  355.     if(hmmc->MspInitCallback == NULL)
  356.     {
  357.       hmmc->MspInitCallback = HAL_MMC_MspInit;
  358.     }
  359.  
  360.     /* Init the low level hardware */
  361.     hmmc->MspInitCallback(hmmc);
  362. #else
  363.     /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
  364.     HAL_MMC_MspInit(hmmc);
  365. #endif
  366.   }
  367.  
  368.   hmmc->State = HAL_MMC_STATE_BUSY;
  369.  
  370.   /* Initialize the Card parameters */
  371.   if(HAL_MMC_InitCard(hmmc) == HAL_ERROR)
  372.   {
  373.     return HAL_ERROR;
  374.   }
  375.  
  376.   /* Initialize the error code */
  377.   hmmc->ErrorCode = HAL_DMA_ERROR_NONE;
  378.  
  379.   /* Initialize the MMC operation */
  380.   hmmc->Context = MMC_CONTEXT_NONE;
  381.  
  382.   /* Initialize the MMC state */
  383.   hmmc->State = HAL_MMC_STATE_READY;
  384.  
  385.   return HAL_OK;
  386. }
  387.  
  388. /**
  389.   * @brief  Initializes the MMC Card.
  390.   * @param  hmmc: Pointer to MMC handle
  391.   * @note   This function initializes the MMC card. It could be used when a card
  392.             re-initialization is needed.
  393.   * @retval HAL status
  394.   */
  395. HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc)
  396. {
  397.   uint32_t errorstate;
  398.   MMC_InitTypeDef Init;
  399.   HAL_StatusTypeDef status;
  400.  
  401.   /* Default SDIO peripheral configuration for MMC card initialization */
  402.   Init.ClockEdge           = SDIO_CLOCK_EDGE_RISING;
  403.   Init.ClockBypass         = SDIO_CLOCK_BYPASS_DISABLE;
  404.   Init.ClockPowerSave      = SDIO_CLOCK_POWER_SAVE_DISABLE;
  405.   Init.BusWide             = SDIO_BUS_WIDE_1B;
  406.   Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
  407.   Init.ClockDiv            = SDIO_INIT_CLK_DIV;
  408.  
  409.   /* Initialize SDIO peripheral interface with default configuration */
  410.   status = SDIO_Init(hmmc->Instance, Init);
  411.   if(status == HAL_ERROR)
  412.   {
  413.     return HAL_ERROR;
  414.   }
  415.  
  416.   /* Disable SDIO Clock */
  417.   __HAL_MMC_DISABLE(hmmc);
  418.  
  419.   /* Set Power State to ON */
  420.   status = SDIO_PowerState_ON(hmmc->Instance);
  421.   if(status == HAL_ERROR)
  422.   {
  423.     return HAL_ERROR;
  424.   }
  425.  
  426.   /* Enable MMC Clock */
  427.   __HAL_MMC_ENABLE(hmmc);
  428.  
  429.   /* Identify card operating voltage */
  430.   errorstate = MMC_PowerON(hmmc);
  431.   if(errorstate != HAL_MMC_ERROR_NONE)
  432.   {
  433.     hmmc->State = HAL_MMC_STATE_READY;
  434.     hmmc->ErrorCode |= errorstate;
  435.     return HAL_ERROR;
  436.   }
  437.  
  438.   /* Card initialization */
  439.   errorstate = MMC_InitCard(hmmc);
  440.   if(errorstate != HAL_MMC_ERROR_NONE)
  441.   {
  442.     hmmc->State = HAL_MMC_STATE_READY;
  443.     hmmc->ErrorCode |= errorstate;
  444.     return HAL_ERROR;
  445.   }
  446.  
  447.   return HAL_OK;
  448. }
  449.  
  450. /**
  451.   * @brief  De-Initializes the MMC card.
  452.   * @param  hmmc: Pointer to MMC handle
  453.   * @retval HAL status
  454.   */
  455. HAL_StatusTypeDef HAL_MMC_DeInit(MMC_HandleTypeDef *hmmc)
  456. {
  457.   /* Check the MMC handle allocation */
  458.   if(hmmc == NULL)
  459.   {
  460.     return HAL_ERROR;
  461.   }
  462.  
  463.   /* Check the parameters */
  464.   assert_param(IS_SDIO_ALL_INSTANCE(hmmc->Instance));
  465.  
  466.   hmmc->State = HAL_MMC_STATE_BUSY;
  467.  
  468.   /* Set MMC power state to off */
  469.   MMC_PowerOFF(hmmc);
  470.  
  471. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  472.   if(hmmc->MspDeInitCallback == NULL)
  473.   {
  474.     hmmc->MspDeInitCallback = HAL_MMC_MspDeInit;
  475.   }
  476.  
  477.   /* DeInit the low level hardware */
  478.   hmmc->MspDeInitCallback(hmmc);
  479. #else
  480.   /* De-Initialize the MSP layer */
  481.   HAL_MMC_MspDeInit(hmmc);
  482. #endif
  483.  
  484.   hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  485.   hmmc->State = HAL_MMC_STATE_RESET;
  486.  
  487.   return HAL_OK;
  488. }
  489.  
  490.  
  491. /**
  492.   * @brief  Initializes the MMC MSP.
  493.   * @param  hmmc: Pointer to MMC handle
  494.   * @retval None
  495.   */
  496. __weak void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc)
  497. {
  498.   /* Prevent unused argument(s) compilation warning */
  499.   UNUSED(hmmc);
  500.  
  501.   /* NOTE : This function Should not be modified, when the callback is needed,
  502.             the HAL_MMC_MspInit could be implemented in the user file
  503.    */
  504. }
  505.  
  506. /**
  507.   * @brief  De-Initialize MMC MSP.
  508.   * @param  hmmc: Pointer to MMC handle
  509.   * @retval None
  510.   */
  511. __weak void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc)
  512. {
  513.   /* Prevent unused argument(s) compilation warning */
  514.   UNUSED(hmmc);
  515.  
  516.   /* NOTE : This function Should not be modified, when the callback is needed,
  517.             the HAL_MMC_MspDeInit could be implemented in the user file
  518.    */
  519. }
  520.  
  521. /**
  522.   * @}
  523.   */
  524.  
  525. /** @addtogroup MMC_Exported_Functions_Group2
  526.  *  @brief   Data transfer functions
  527.  *
  528. @verbatim
  529.   ==============================================================================
  530.                         ##### IO operation functions #####
  531.   ==============================================================================
  532.   [..]
  533.     This subsection provides a set of functions allowing to manage the data
  534.     transfer from/to MMC card.
  535.  
  536. @endverbatim
  537.   * @{
  538.   */
  539.  
  540. /**
  541.   * @brief  Reads block(s) from a specified address in a card. The Data transfer
  542.   *         is managed by polling mode.
  543.   * @note   This API should be followed by a check on the card state through
  544.   *         HAL_MMC_GetCardState().
  545.   * @param  hmmc: Pointer to MMC handle
  546.   * @param  pData: pointer to the buffer that will contain the received data
  547.   * @param  BlockAdd: Block Address from where data is to be read
  548.   * @param  NumberOfBlocks: Number of MMC blocks to read
  549.   * @param  Timeout: Specify timeout value
  550.   * @retval HAL status
  551.   */
  552. HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout)
  553. {
  554.   SDIO_DataInitTypeDef config;
  555.   uint32_t errorstate;
  556.   uint32_t tickstart = HAL_GetTick();
  557.   uint32_t count, data, dataremaining;
  558.   uint32_t add = BlockAdd;
  559.   uint8_t *tempbuff = pData;
  560.  
  561.   if(NULL == pData)
  562.   {
  563.     hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
  564.     return HAL_ERROR;
  565.   }
  566.  
  567.   if(hmmc->State == HAL_MMC_STATE_READY)
  568.   {
  569.     hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  570.  
  571.     if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
  572.     {
  573.       hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
  574.       return HAL_ERROR;
  575.     }
  576.  
  577.     hmmc->State = HAL_MMC_STATE_BUSY;
  578.  
  579.     /* Initialize data control register */
  580.     hmmc->Instance->DCTRL = 0U;
  581.  
  582.     if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
  583.     {
  584.       add *= 512U;
  585.     }
  586.  
  587.     /* Set Block Size for Card */
  588.     errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
  589.     if(errorstate != HAL_MMC_ERROR_NONE)
  590.     {
  591.       /* Clear all the static flags */
  592.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  593.       hmmc->ErrorCode |= errorstate;
  594.       hmmc->State = HAL_MMC_STATE_READY;
  595.       return HAL_ERROR;
  596.     }
  597.  
  598.     /* Configure the MMC DPSM (Data Path State Machine) */
  599.     config.DataTimeOut   = SDMMC_DATATIMEOUT;
  600.     config.DataLength    = NumberOfBlocks * MMC_BLOCKSIZE;
  601.     config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
  602.     config.TransferDir   = SDIO_TRANSFER_DIR_TO_SDIO;
  603.     config.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
  604.     config.DPSM          = SDIO_DPSM_ENABLE;
  605.     (void)SDIO_ConfigData(hmmc->Instance, &config);
  606.  
  607.     /* Read block(s) in polling mode */
  608.     if(NumberOfBlocks > 1U)
  609.     {
  610.       hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK;
  611.  
  612.       /* Read Multi Block command */
  613.       errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add);
  614.     }
  615.     else
  616.     {
  617.       hmmc->Context = MMC_CONTEXT_READ_SINGLE_BLOCK;
  618.  
  619.       /* Read Single Block command */
  620.       errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add);
  621.     }
  622.     if(errorstate != HAL_MMC_ERROR_NONE)
  623.     {
  624.       /* Clear all the static flags */
  625.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  626.       hmmc->ErrorCode |= errorstate;
  627.       hmmc->State = HAL_MMC_STATE_READY;
  628.       return HAL_ERROR;
  629.     }
  630.  
  631.     /* Poll on SDIO flags */
  632.     dataremaining = config.DataLength;
  633.     while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
  634.     {
  635.       if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXFIFOHF) && (dataremaining > 0U))
  636.       {
  637.         /* Read data from SDIO Rx FIFO */
  638.         for(count = 0U; count < 8U; count++)
  639.         {
  640.           data = SDIO_ReadFIFO(hmmc->Instance);
  641.           *tempbuff = (uint8_t)(data & 0xFFU);
  642.           tempbuff++;
  643.           dataremaining--;
  644.           *tempbuff = (uint8_t)((data >> 8U) & 0xFFU);
  645.           tempbuff++;
  646.           dataremaining--;
  647.           *tempbuff = (uint8_t)((data >> 16U) & 0xFFU);
  648.           tempbuff++;
  649.           dataremaining--;
  650.           *tempbuff = (uint8_t)((data >> 24U) & 0xFFU);
  651.           tempbuff++;
  652.           dataremaining--;
  653.         }
  654.       }
  655.  
  656.       if(((HAL_GetTick()-tickstart) >=  Timeout) || (Timeout == 0U))
  657.       {
  658.         /* Clear all the static flags */
  659.         __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  660.         hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT;
  661.         hmmc->State= HAL_MMC_STATE_READY;
  662.         return HAL_TIMEOUT;
  663.       }
  664.     }
  665.  
  666.     /* Send stop transmission command in case of multiblock read */
  667.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
  668.     {
  669.       /* Send stop transmission command */
  670.       errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
  671.       if(errorstate != HAL_MMC_ERROR_NONE)
  672.       {
  673.         /* Clear all the static flags */
  674.         __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  675.         hmmc->ErrorCode |= errorstate;
  676.         hmmc->State = HAL_MMC_STATE_READY;
  677.         return HAL_ERROR;
  678.       }
  679.     }
  680.  
  681.     /* Get error state */
  682.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DTIMEOUT))
  683.     {
  684.       /* Clear all the static flags */
  685.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  686.       hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
  687.       hmmc->State = HAL_MMC_STATE_READY;
  688.       return HAL_ERROR;
  689.     }
  690.     else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL))
  691.     {
  692.       /* Clear all the static flags */
  693.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  694.       hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL;
  695.       hmmc->State = HAL_MMC_STATE_READY;
  696.       return HAL_ERROR;
  697.     }
  698.     else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR))
  699.     {
  700.       /* Clear all the static flags */
  701.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  702.       hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN;
  703.       hmmc->State = HAL_MMC_STATE_READY;
  704.       return HAL_ERROR;
  705.     }
  706.     else
  707.     {
  708.       /* Nothing to do */
  709.     }
  710.  
  711.     /* Empty FIFO if there is still any data */
  712.     while ((__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXDAVL)) && (dataremaining > 0U))
  713.     {
  714.       data = SDIO_ReadFIFO(hmmc->Instance);
  715.       *tempbuff = (uint8_t)(data & 0xFFU);
  716.       tempbuff++;
  717.       dataremaining--;
  718.       *tempbuff = (uint8_t)((data >> 8U) & 0xFFU);
  719.       tempbuff++;
  720.       dataremaining--;
  721.       *tempbuff = (uint8_t)((data >> 16U) & 0xFFU);
  722.       tempbuff++;
  723.       dataremaining--;
  724.       *tempbuff = (uint8_t)((data >> 24U) & 0xFFU);
  725.       tempbuff++;
  726.       dataremaining--;
  727.  
  728.       if(((HAL_GetTick()-tickstart) >=  Timeout) || (Timeout == 0U))
  729.       {
  730.         /* Clear all the static flags */
  731.         __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);        
  732.         hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT;
  733.         hmmc->State= HAL_MMC_STATE_READY;
  734.         return HAL_ERROR;
  735.       }
  736.     }
  737.  
  738.     /* Clear all the static flags */
  739.     __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
  740.  
  741.     hmmc->State = HAL_MMC_STATE_READY;
  742.  
  743.     return HAL_OK;
  744.   }
  745.   else
  746.   {
  747.     hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY;
  748.     return HAL_ERROR;
  749.   }
  750. }
  751.  
  752. /**
  753.   * @brief  Allows to write block(s) to a specified address in a card. The Data
  754.   *         transfer is managed by polling mode.
  755.   * @note   This API should be followed by a check on the card state through
  756.   *         HAL_MMC_GetCardState().
  757.   * @param  hmmc: Pointer to MMC handle
  758.   * @param  pData: pointer to the buffer that will contain the data to transmit
  759.   * @param  BlockAdd: Block Address where data will be written
  760.   * @param  NumberOfBlocks: Number of MMC blocks to write
  761.   * @param  Timeout: Specify timeout value
  762.   * @retval HAL status
  763.   */
  764. HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout)
  765. {
  766.   SDIO_DataInitTypeDef config;
  767.   uint32_t errorstate;
  768.   uint32_t tickstart = HAL_GetTick();
  769.   uint32_t count, data, dataremaining;
  770.   uint32_t add = BlockAdd;
  771.   uint8_t *tempbuff = pData;
  772.  
  773.   if(NULL == pData)
  774.   {
  775.     hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
  776.     return HAL_ERROR;
  777.   }
  778.  
  779.   if(hmmc->State == HAL_MMC_STATE_READY)
  780.   {
  781.     hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  782.  
  783.     if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
  784.     {
  785.       hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
  786.       return HAL_ERROR;
  787.     }
  788.  
  789.     hmmc->State = HAL_MMC_STATE_BUSY;
  790.  
  791.     /* Initialize data control register */
  792.     hmmc->Instance->DCTRL = 0U;
  793.  
  794.     if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
  795.     {
  796.       add *= 512U;
  797.     }
  798.  
  799.     /* Set Block Size for Card */
  800.     errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
  801.     if(errorstate != HAL_MMC_ERROR_NONE)
  802.     {
  803.       /* Clear all the static flags */
  804.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  805.       hmmc->ErrorCode |= errorstate;
  806.       hmmc->State = HAL_MMC_STATE_READY;
  807.       return HAL_ERROR;
  808.     }
  809.  
  810.     /* Write Blocks in Polling mode */
  811.     if(NumberOfBlocks > 1U)
  812.     {
  813.       hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK;
  814.  
  815.       /* Write Multi Block command */
  816.       errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add);
  817.     }
  818.     else
  819.     {
  820.       hmmc->Context = MMC_CONTEXT_WRITE_SINGLE_BLOCK;
  821.  
  822.       /* Write Single Block command */
  823.       errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add);
  824.     }
  825.     if(errorstate != HAL_MMC_ERROR_NONE)
  826.     {
  827.       /* Clear all the static flags */
  828.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  829.       hmmc->ErrorCode |= errorstate;
  830.       hmmc->State = HAL_MMC_STATE_READY;
  831.       return HAL_ERROR;
  832.     }
  833.  
  834.     /* Configure the MMC DPSM (Data Path State Machine) */
  835.     config.DataTimeOut   = SDMMC_DATATIMEOUT;
  836.     config.DataLength    = NumberOfBlocks * MMC_BLOCKSIZE;
  837.     config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
  838.     config.TransferDir   = SDIO_TRANSFER_DIR_TO_CARD;
  839.     config.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
  840.     config.DPSM          = SDIO_DPSM_ENABLE;
  841.     (void)SDIO_ConfigData(hmmc->Instance, &config);
  842.  
  843.     /* Write block(s) in polling mode */
  844.     dataremaining = config.DataLength;
  845.     while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
  846.     {
  847.       if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXFIFOHE) && (dataremaining > 0U))
  848.       {
  849.         /* Write data to SDIO Tx FIFO */
  850.         for(count = 0U; count < 8U; count++)
  851.         {
  852.           data = (uint32_t)(*tempbuff);
  853.           tempbuff++;
  854.           dataremaining--;
  855.           data |= ((uint32_t)(*tempbuff) << 8U);
  856.           tempbuff++;
  857.           dataremaining--;
  858.           data |= ((uint32_t)(*tempbuff) << 16U);
  859.           tempbuff++;
  860.           dataremaining--;
  861.           data |= ((uint32_t)(*tempbuff) << 24U);
  862.           tempbuff++;
  863.           dataremaining--;
  864.           (void)SDIO_WriteFIFO(hmmc->Instance, &data);
  865.         }
  866.       }
  867.  
  868.       if(((HAL_GetTick()-tickstart) >=  Timeout) || (Timeout == 0U))
  869.       {
  870.         /* Clear all the static flags */
  871.         __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  872.         hmmc->ErrorCode |= errorstate;
  873.         hmmc->State = HAL_MMC_STATE_READY;
  874.         return HAL_TIMEOUT;
  875.       }
  876.     }
  877.  
  878.     /* Send stop transmission command in case of multiblock write */
  879.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
  880.     {
  881.       /* Send stop transmission command */
  882.       errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
  883.       if(errorstate != HAL_MMC_ERROR_NONE)
  884.       {
  885.         /* Clear all the static flags */
  886.         __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  887.         hmmc->ErrorCode |= errorstate;
  888.         hmmc->State = HAL_MMC_STATE_READY;
  889.         return HAL_ERROR;
  890.       }
  891.     }
  892.  
  893.     /* Get error state */
  894.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DTIMEOUT))
  895.     {
  896.       /* Clear all the static flags */
  897.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  898.       hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
  899.       hmmc->State = HAL_MMC_STATE_READY;
  900.       return HAL_ERROR;
  901.     }
  902.     else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL))
  903.     {
  904.       /* Clear all the static flags */
  905.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  906.       hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL;
  907.       hmmc->State = HAL_MMC_STATE_READY;
  908.       return HAL_ERROR;
  909.     }
  910.     else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXUNDERR))
  911.     {
  912.       /* Clear all the static flags */
  913.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  914.       hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN;
  915.       hmmc->State = HAL_MMC_STATE_READY;
  916.       return HAL_ERROR;
  917.     }
  918.     else
  919.     {
  920.       /* Nothing to do */
  921.     }
  922.  
  923.     /* Clear all the static flags */
  924.     __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
  925.  
  926.     hmmc->State = HAL_MMC_STATE_READY;
  927.  
  928.     return HAL_OK;
  929.   }
  930.   else
  931.   {
  932.     hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY;
  933.     return HAL_ERROR;
  934.   }
  935. }
  936.  
  937. /**
  938.   * @brief  Reads block(s) from a specified address in a card. The Data transfer
  939.   *         is managed in interrupt mode.
  940.   * @note   This API should be followed by a check on the card state through
  941.   *         HAL_MMC_GetCardState().
  942.   * @note   You could also check the IT transfer process through the MMC Rx
  943.   *         interrupt event.
  944.   * @param  hmmc: Pointer to MMC handle
  945.   * @param  pData: Pointer to the buffer that will contain the received data
  946.   * @param  BlockAdd: Block Address from where data is to be read
  947.   * @param  NumberOfBlocks: Number of blocks to read.
  948.   * @retval HAL status
  949.   */
  950. HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
  951. {
  952.   SDIO_DataInitTypeDef config;
  953.   uint32_t errorstate;
  954.   uint32_t add = BlockAdd;
  955.  
  956.   if(NULL == pData)
  957.   {
  958.     hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
  959.     return HAL_ERROR;
  960.   }
  961.  
  962.   if(hmmc->State == HAL_MMC_STATE_READY)
  963.   {
  964.     hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  965.  
  966.     if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
  967.     {
  968.       hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
  969.       return HAL_ERROR;
  970.     }
  971.  
  972.     hmmc->State = HAL_MMC_STATE_BUSY;
  973.  
  974.     /* Initialize data control register */
  975.     hmmc->Instance->DCTRL = 0U;
  976.  
  977.     hmmc->pRxBuffPtr = pData;
  978.     hmmc->RxXferSize = MMC_BLOCKSIZE * NumberOfBlocks;
  979.  
  980.     __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF | SDIO_IT_STBITERR));
  981.  
  982.     if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
  983.     {
  984.       add *= 512U;
  985.     }
  986.  
  987.     /* Set Block Size for Card */
  988.     errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
  989.     if(errorstate != HAL_MMC_ERROR_NONE)
  990.     {
  991.       /* Clear all the static flags */
  992.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  993.       hmmc->ErrorCode |= errorstate;
  994.       hmmc->State = HAL_MMC_STATE_READY;
  995.       return HAL_ERROR;
  996.     }
  997.  
  998.     /* Configure the MMC DPSM (Data Path State Machine) */
  999.     config.DataTimeOut   = SDMMC_DATATIMEOUT;
  1000.     config.DataLength    = MMC_BLOCKSIZE * NumberOfBlocks;
  1001.     config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
  1002.     config.TransferDir   = SDIO_TRANSFER_DIR_TO_SDIO;
  1003.     config.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
  1004.     config.DPSM          = SDIO_DPSM_ENABLE;
  1005.     (void)SDIO_ConfigData(hmmc->Instance, &config);
  1006.  
  1007.     /* Read Blocks in IT mode */
  1008.     if(NumberOfBlocks > 1U)
  1009.     {
  1010.       hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_IT);
  1011.  
  1012.       /* Read Multi Block command */
  1013.       errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add);
  1014.     }
  1015.     else
  1016.     {
  1017.       hmmc->Context = (MMC_CONTEXT_READ_SINGLE_BLOCK | MMC_CONTEXT_IT);
  1018.  
  1019.       /* Read Single Block command */
  1020.       errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add);
  1021.     }
  1022.  
  1023.     if(errorstate != HAL_MMC_ERROR_NONE)
  1024.     {
  1025.       /* Clear all the static flags */
  1026.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1027.       hmmc->ErrorCode |= errorstate;
  1028.       hmmc->State = HAL_MMC_STATE_READY;
  1029.       return HAL_ERROR;
  1030.     }
  1031.  
  1032.     return HAL_OK;
  1033.   }
  1034.   else
  1035.   {
  1036.     return HAL_BUSY;
  1037.   }
  1038. }
  1039.  
  1040. /**
  1041.   * @brief  Writes block(s) to a specified address in a card. The Data transfer
  1042.   *         is managed in interrupt mode.
  1043.   * @note   This API should be followed by a check on the card state through
  1044.   *         HAL_MMC_GetCardState().
  1045.   * @note   You could also check the IT transfer process through the MMC Tx
  1046.   *         interrupt event.
  1047.   * @param  hmmc: Pointer to MMC handle
  1048.   * @param  pData: Pointer to the buffer that will contain the data to transmit
  1049.   * @param  BlockAdd: Block Address where data will be written
  1050.   * @param  NumberOfBlocks: Number of blocks to write
  1051.   * @retval HAL status
  1052.   */
  1053. HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
  1054. {
  1055.   SDIO_DataInitTypeDef config;
  1056.   uint32_t errorstate;
  1057.   uint32_t add = BlockAdd;
  1058.  
  1059.   if(NULL == pData)
  1060.   {
  1061.     hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
  1062.     return HAL_ERROR;
  1063.   }
  1064.  
  1065.   if(hmmc->State == HAL_MMC_STATE_READY)
  1066.   {
  1067.     hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  1068.  
  1069.     if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
  1070.     {
  1071.       hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
  1072.       return HAL_ERROR;
  1073.     }
  1074.  
  1075.     hmmc->State = HAL_MMC_STATE_BUSY;
  1076.  
  1077.     /* Initialize data control register */
  1078.     hmmc->Instance->DCTRL = 0U;
  1079.  
  1080.     hmmc->pTxBuffPtr = pData;
  1081.     hmmc->TxXferSize = MMC_BLOCKSIZE * NumberOfBlocks;
  1082.  
  1083.     /* Enable transfer interrupts */
  1084.     __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE | SDIO_IT_STBITERR));
  1085.  
  1086.     if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
  1087.     {
  1088.       add *= 512U;
  1089.     }
  1090.  
  1091.     /* Set Block Size for Card */
  1092.     errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
  1093.     if(errorstate != HAL_MMC_ERROR_NONE)
  1094.     {
  1095.       /* Clear all the static flags */
  1096.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1097.       hmmc->ErrorCode |= errorstate;
  1098.       hmmc->State = HAL_MMC_STATE_READY;
  1099.       return HAL_ERROR;
  1100.     }
  1101.  
  1102.     /* Write Blocks in Polling mode */
  1103.     if(NumberOfBlocks > 1U)
  1104.     {
  1105.       hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK| MMC_CONTEXT_IT);
  1106.  
  1107.       /* Write Multi Block command */
  1108.       errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add);
  1109.     }
  1110.     else
  1111.     {
  1112.       hmmc->Context = (MMC_CONTEXT_WRITE_SINGLE_BLOCK | MMC_CONTEXT_IT);
  1113.  
  1114.       /* Write Single Block command */
  1115.       errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add);
  1116.     }
  1117.     if(errorstate != HAL_MMC_ERROR_NONE)
  1118.     {
  1119.       /* Clear all the static flags */
  1120.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1121.       hmmc->ErrorCode |= errorstate;
  1122.       hmmc->State = HAL_MMC_STATE_READY;
  1123.       return HAL_ERROR;
  1124.     }
  1125.  
  1126.     /* Configure the MMC DPSM (Data Path State Machine) */
  1127.     config.DataTimeOut   = SDMMC_DATATIMEOUT;
  1128.     config.DataLength    = MMC_BLOCKSIZE * NumberOfBlocks;
  1129.     config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
  1130.     config.TransferDir   = SDIO_TRANSFER_DIR_TO_CARD;
  1131.     config.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
  1132.     config.DPSM          = SDIO_DPSM_ENABLE;
  1133.     (void)SDIO_ConfigData(hmmc->Instance, &config);
  1134.    
  1135.     return HAL_OK;
  1136.   }
  1137.   else
  1138.   {
  1139.     return HAL_BUSY;
  1140.   }
  1141. }
  1142.  
  1143. /**
  1144.   * @brief  Reads block(s) from a specified address in a card. The Data transfer
  1145.   *         is managed by DMA mode.
  1146.   * @note   This API should be followed by a check on the card state through
  1147.   *         HAL_MMC_GetCardState().
  1148.   * @note   You could also check the DMA transfer process through the MMC Rx
  1149.   *         interrupt event.
  1150.   * @param  hmmc: Pointer MMC handle
  1151.   * @param  pData: Pointer to the buffer that will contain the received data
  1152.   * @param  BlockAdd: Block Address from where data is to be read
  1153.   * @param  NumberOfBlocks: Number of blocks to read.
  1154.   * @retval HAL status
  1155.   */
  1156. HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
  1157. {
  1158.   SDIO_DataInitTypeDef config;
  1159.   uint32_t errorstate;
  1160.   uint32_t add = BlockAdd;
  1161.  
  1162.   if(NULL == pData)
  1163.   {
  1164.     hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
  1165.     return HAL_ERROR;
  1166.   }
  1167.  
  1168.   if(hmmc->State == HAL_MMC_STATE_READY)
  1169.   {
  1170.     hmmc->ErrorCode = HAL_DMA_ERROR_NONE;
  1171.  
  1172.     if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
  1173.     {
  1174.       hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
  1175.       return HAL_ERROR;
  1176.     }
  1177.  
  1178.     hmmc->State = HAL_MMC_STATE_BUSY;
  1179.  
  1180.     /* Initialize data control register */
  1181.     hmmc->Instance->DCTRL = 0U;
  1182.  
  1183.     __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_IT_STBITERR));
  1184.  
  1185.     /* Set the DMA transfer complete callback */
  1186.     hmmc->hdmarx->XferCpltCallback = MMC_DMAReceiveCplt;
  1187.  
  1188.     /* Set the DMA error callback */
  1189.     hmmc->hdmarx->XferErrorCallback = MMC_DMAError;
  1190.  
  1191.     /* Set the DMA Abort callback */
  1192.     hmmc->hdmarx->XferAbortCallback = NULL;
  1193.  
  1194.     if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
  1195.     {
  1196.       add *= 512U;
  1197.     }
  1198.  
  1199.     /* Set Block Size for Card */
  1200.     errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
  1201.     if(errorstate != HAL_MMC_ERROR_NONE)
  1202.     {
  1203.       /* Clear all the static flags */
  1204.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1205.       hmmc->ErrorCode = errorstate;
  1206.       hmmc->State = HAL_MMC_STATE_READY;
  1207.       return HAL_ERROR;
  1208.     }
  1209.  
  1210.     /* Enable the DMA Channel */
  1211.     if(HAL_DMA_Start_IT(hmmc->hdmarx, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)pData, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK)
  1212.     {
  1213.       __HAL_MMC_DISABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND));
  1214.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1215.       hmmc->ErrorCode = HAL_MMC_ERROR_DMA;
  1216.       hmmc->State = HAL_MMC_STATE_READY;
  1217.       return HAL_ERROR;
  1218.     }
  1219.     else
  1220.     {
  1221.       /* Enable MMC DMA transfer */
  1222.       __HAL_MMC_DMA_ENABLE(hmmc);
  1223.  
  1224.       /* Configure the MMC DPSM (Data Path State Machine) */
  1225.       config.DataTimeOut   = SDMMC_DATATIMEOUT;
  1226.       config.DataLength    = MMC_BLOCKSIZE * NumberOfBlocks;
  1227.       config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
  1228.       config.TransferDir   = SDIO_TRANSFER_DIR_TO_SDIO;
  1229.       config.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
  1230.       config.DPSM          = SDIO_DPSM_ENABLE;
  1231.       (void)SDIO_ConfigData(hmmc->Instance, &config);
  1232.  
  1233.       /* Read Blocks in DMA mode */
  1234.       if(NumberOfBlocks > 1U)
  1235.       {
  1236.         hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA);
  1237.  
  1238.         /* Read Multi Block command */
  1239.         errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add);
  1240.       }
  1241.       else
  1242.       {
  1243.         hmmc->Context = (MMC_CONTEXT_READ_SINGLE_BLOCK | MMC_CONTEXT_DMA);
  1244.  
  1245.         /* Read Single Block command */
  1246.         errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add);
  1247.       }
  1248.       if(errorstate != HAL_MMC_ERROR_NONE)
  1249.       {
  1250.         /* Clear all the static flags */
  1251.         __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1252.         __HAL_MMC_DISABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND));
  1253.         hmmc->ErrorCode = errorstate;
  1254.         hmmc->State = HAL_MMC_STATE_READY;
  1255.         return HAL_ERROR;
  1256.       }
  1257.  
  1258.       return HAL_OK;
  1259.     }
  1260.   }
  1261.   else
  1262.   {
  1263.     return HAL_BUSY;
  1264.   }
  1265. }
  1266.  
  1267. /**
  1268.   * @brief  Writes block(s) to a specified address in a card. The Data transfer
  1269.   *         is managed by DMA mode.
  1270.   * @note   This API should be followed by a check on the card state through
  1271.   *         HAL_MMC_GetCardState().
  1272.   * @note   You could also check the DMA transfer process through the MMC Tx
  1273.   *         interrupt event.
  1274.   * @param  hmmc: Pointer to MMC handle
  1275.   * @param  pData: Pointer to the buffer that will contain the data to transmit
  1276.   * @param  BlockAdd: Block Address where data will be written
  1277.   * @param  NumberOfBlocks: Number of blocks to write
  1278.   * @retval HAL status
  1279.   */
  1280. HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
  1281. {
  1282.   SDIO_DataInitTypeDef config;
  1283.   uint32_t errorstate;
  1284.   uint32_t add = BlockAdd;
  1285.  
  1286.   if(NULL == pData)
  1287.   {
  1288.     hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
  1289.     return HAL_ERROR;
  1290.   }
  1291.  
  1292.   if(hmmc->State == HAL_MMC_STATE_READY)
  1293.   {
  1294.     hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  1295.  
  1296.     if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
  1297.     {
  1298.       hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
  1299.       return HAL_ERROR;
  1300.     }
  1301.  
  1302.     hmmc->State = HAL_MMC_STATE_BUSY;
  1303.  
  1304.     /* Initialize data control register */
  1305.     hmmc->Instance->DCTRL = 0U;
  1306.  
  1307.     /* Enable MMC Error interrupts */
  1308.         __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR));
  1309.  
  1310.     /* Set the DMA transfer complete callback */
  1311.     hmmc->hdmatx->XferCpltCallback = MMC_DMATransmitCplt;
  1312.  
  1313.     /* Set the DMA error callback */
  1314.     hmmc->hdmatx->XferErrorCallback = MMC_DMAError;
  1315.  
  1316.     /* Set the DMA Abort callback */
  1317.     hmmc->hdmatx->XferAbortCallback = NULL;
  1318.  
  1319.     if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
  1320.     {
  1321.       add *= 512U;
  1322.     }
  1323.  
  1324.     /* Set Block Size for Card */
  1325.     errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
  1326.     if(errorstate != HAL_MMC_ERROR_NONE)
  1327.     {
  1328.       /* Clear all the static flags */
  1329.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1330.       hmmc->ErrorCode |= errorstate;
  1331.       hmmc->State = HAL_MMC_STATE_READY;
  1332.       return HAL_ERROR;
  1333.     }
  1334.  
  1335.     /* Write Blocks in Polling mode */
  1336.     if(NumberOfBlocks > 1U)
  1337.     {
  1338.       hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK | MMC_CONTEXT_DMA);
  1339.  
  1340.       /* Write Multi Block command */
  1341.       errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add);
  1342.     }
  1343.     else
  1344.     {
  1345.       hmmc->Context = (MMC_CONTEXT_WRITE_SINGLE_BLOCK | MMC_CONTEXT_DMA);
  1346.  
  1347.       /* Write Single Block command */
  1348.       errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add);
  1349.     }
  1350.     if(errorstate != HAL_MMC_ERROR_NONE)
  1351.     {
  1352.       /* Clear all the static flags */
  1353.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1354.       __HAL_MMC_DISABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND));
  1355.       hmmc->ErrorCode |= errorstate;
  1356.       hmmc->State = HAL_MMC_STATE_READY;
  1357.       return HAL_ERROR;
  1358.     }
  1359.  
  1360.     /* Enable SDIO DMA transfer */
  1361.     __HAL_MMC_DMA_ENABLE(hmmc);
  1362.  
  1363.     /* Enable the DMA Channel */
  1364.     if(HAL_DMA_Start_IT(hmmc->hdmatx, (uint32_t)pData, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK)
  1365.     {
  1366.       __HAL_MMC_DISABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND));
  1367.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1368.       hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
  1369.       hmmc->State = HAL_MMC_STATE_READY;
  1370.       return HAL_ERROR;
  1371.     }
  1372.     else
  1373.     {    
  1374.       /* Configure the MMC DPSM (Data Path State Machine) */
  1375.       config.DataTimeOut   = SDMMC_DATATIMEOUT;
  1376.       config.DataLength    = MMC_BLOCKSIZE * NumberOfBlocks;
  1377.       config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
  1378.       config.TransferDir   = SDIO_TRANSFER_DIR_TO_CARD;
  1379.       config.TransferMode  = SDIO_TRANSFER_MODE_BLOCK;
  1380.       config.DPSM          = SDIO_DPSM_ENABLE;
  1381.       (void)SDIO_ConfigData(hmmc->Instance, &config);
  1382.  
  1383.       return HAL_OK;
  1384.     }
  1385.   }
  1386.   else
  1387.   {
  1388.     return HAL_BUSY;
  1389.   }
  1390. }
  1391.  
  1392. /**
  1393.   * @brief  Erases the specified memory area of the given MMC card.
  1394.   * @note   This API should be followed by a check on the card state through
  1395.   *         HAL_MMC_GetCardState().
  1396.   * @param  hmmc: Pointer to MMC handle
  1397.   * @param  BlockStartAdd: Start Block address
  1398.   * @param  BlockEndAdd: End Block address
  1399.   * @retval HAL status
  1400.   */
  1401. HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd)
  1402. {
  1403.   uint32_t errorstate;
  1404.   uint32_t start_add = BlockStartAdd;
  1405.   uint32_t end_add = BlockEndAdd;
  1406.  
  1407.   if(hmmc->State == HAL_MMC_STATE_READY)
  1408.   {
  1409.     hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  1410.  
  1411.     if(end_add < start_add)
  1412.     {
  1413.       hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
  1414.       return HAL_ERROR;
  1415.     }
  1416.  
  1417.     if(end_add > (hmmc->MmcCard.LogBlockNbr))
  1418.     {
  1419.       hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
  1420.       return HAL_ERROR;
  1421.     }
  1422.  
  1423.     hmmc->State = HAL_MMC_STATE_BUSY;
  1424.  
  1425.     /* Check if the card command class supports erase command */
  1426.     if(((hmmc->MmcCard.Class) & SDIO_CCCC_ERASE) == 0U)
  1427.     {
  1428.       /* Clear all the static flags */
  1429.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1430.       hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE;
  1431.       hmmc->State = HAL_MMC_STATE_READY;
  1432.       return HAL_ERROR;
  1433.     }
  1434.  
  1435.     if((SDIO_GetResponse(hmmc->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED)
  1436.     {
  1437.       /* Clear all the static flags */
  1438.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1439.       hmmc->ErrorCode |= HAL_MMC_ERROR_LOCK_UNLOCK_FAILED;
  1440.       hmmc->State = HAL_MMC_STATE_READY;
  1441.       return HAL_ERROR;
  1442.     }
  1443.  
  1444.     if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
  1445.     {
  1446.       start_add *= 512U;
  1447.       end_add   *= 512U;
  1448.     }
  1449.  
  1450.     /* Send CMD35 MMC_ERASE_GRP_START with argument as addr  */
  1451.     errorstate = SDMMC_CmdEraseStartAdd(hmmc->Instance, start_add);
  1452.     if(errorstate != HAL_MMC_ERROR_NONE)
  1453.     {
  1454.       /* Clear all the static flags */
  1455.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1456.       hmmc->ErrorCode |= errorstate;
  1457.       hmmc->State = HAL_MMC_STATE_READY;
  1458.       return HAL_ERROR;
  1459.     }
  1460.  
  1461.     /* Send CMD36 MMC_ERASE_GRP_END with argument as addr  */
  1462.     errorstate = SDMMC_CmdEraseEndAdd(hmmc->Instance, end_add);
  1463.     if(errorstate != HAL_MMC_ERROR_NONE)
  1464.     {
  1465.       /* Clear all the static flags */
  1466.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1467.       hmmc->ErrorCode |= errorstate;
  1468.       hmmc->State = HAL_MMC_STATE_READY;
  1469.       return HAL_ERROR;
  1470.     }
  1471.  
  1472.     /* Send CMD38 ERASE */
  1473.     errorstate = SDMMC_CmdErase(hmmc->Instance);
  1474.     if(errorstate != HAL_MMC_ERROR_NONE)
  1475.     {
  1476.       /* Clear all the static flags */
  1477.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  1478.       hmmc->ErrorCode |= errorstate;
  1479.       hmmc->State = HAL_MMC_STATE_READY;
  1480.       return HAL_ERROR;
  1481.     }
  1482.  
  1483.     hmmc->State = HAL_MMC_STATE_READY;
  1484.  
  1485.     return HAL_OK;
  1486.   }
  1487.   else
  1488.   {
  1489.     return HAL_BUSY;
  1490.   }
  1491. }
  1492.  
  1493. /**
  1494.   * @brief  This function handles MMC card interrupt request.
  1495.   * @param  hmmc: Pointer to MMC handle
  1496.   * @retval None
  1497.   */
  1498. void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc)
  1499. {
  1500.   uint32_t errorstate;
  1501.   uint32_t context = hmmc->Context;
  1502.  
  1503.   /* Check for SDIO interrupt flags */
  1504.   if((__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXFIFOHF) != RESET) && ((context & MMC_CONTEXT_IT) != 0U))
  1505.   {
  1506.     MMC_Read_IT(hmmc);
  1507.   }
  1508.  
  1509.   else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DATAEND) != RESET)
  1510.   {
  1511.     __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_FLAG_DATAEND);
  1512.  
  1513.     __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
  1514.                              SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
  1515.    
  1516.     hmmc->Instance->DCTRL &= ~(SDIO_DCTRL_DTEN);
  1517.  
  1518.     if((context & MMC_CONTEXT_DMA) != 0U)
  1519.     {
  1520.       if((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)
  1521.       {
  1522.         errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
  1523.         if(errorstate != HAL_MMC_ERROR_NONE)
  1524.         {
  1525.           hmmc->ErrorCode |= errorstate;
  1526. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  1527.           hmmc->ErrorCallback(hmmc);
  1528. #else
  1529.           HAL_MMC_ErrorCallback(hmmc);
  1530. #endif
  1531.         }
  1532.       }
  1533.       if(((context & MMC_CONTEXT_READ_SINGLE_BLOCK) == 0U) && ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) == 0U))
  1534.       {
  1535.         /* Disable the DMA transfer for transmit request by setting the DMAEN bit
  1536.         in the MMC DCTRL register */
  1537.         hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
  1538.        
  1539.         hmmc->State = HAL_MMC_STATE_READY;
  1540.        
  1541. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  1542.         hmmc->TxCpltCallback(hmmc);
  1543. #else
  1544.         HAL_MMC_TxCpltCallback(hmmc);
  1545. #endif
  1546.       }
  1547.     }
  1548.     else if((context & MMC_CONTEXT_IT) != 0U)
  1549.     {
  1550.       /* Stop Transfer for Write Multi blocks or Read Multi blocks */
  1551.       if(((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U))
  1552.       {
  1553.         errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
  1554.         if(errorstate != HAL_MMC_ERROR_NONE)
  1555.         {
  1556.           hmmc->ErrorCode |= errorstate;
  1557. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  1558.           hmmc->ErrorCallback(hmmc);
  1559. #else
  1560.           HAL_MMC_ErrorCallback(hmmc);
  1561. #endif
  1562.         }
  1563.       }
  1564.  
  1565.       /* Clear all the static flags */
  1566.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
  1567.  
  1568.       hmmc->State = HAL_MMC_STATE_READY;
  1569.       if(((context & MMC_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U))
  1570.       {
  1571. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  1572.         hmmc->RxCpltCallback(hmmc);
  1573. #else
  1574.         HAL_MMC_RxCpltCallback(hmmc);
  1575. #endif
  1576.       }
  1577.       else
  1578.       {
  1579. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  1580.         hmmc->TxCpltCallback(hmmc);
  1581. #else
  1582.         HAL_MMC_TxCpltCallback(hmmc);
  1583. #endif
  1584.       }
  1585.     }
  1586.     else
  1587.     {
  1588.       /* Nothing to do */
  1589.     }
  1590.   }
  1591.  
  1592.   else if((__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXFIFOHE) != RESET) && ((context & MMC_CONTEXT_IT) != 0U))
  1593.   {
  1594.     MMC_Write_IT(hmmc);
  1595.   }
  1596.  
  1597.   else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_RXOVERR | SDIO_FLAG_TXUNDERR | SDIO_FLAG_STBITERR) != RESET)
  1598.   {
  1599.     /* Set Error code */
  1600.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL) != RESET)
  1601.     {
  1602.       hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL;
  1603.     }
  1604.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DTIMEOUT) != RESET)
  1605.     {
  1606.       hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
  1607.     }
  1608.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR) != RESET)
  1609.     {
  1610.       hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN;
  1611.     }
  1612.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXUNDERR) != RESET)
  1613.     {
  1614.       hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN;
  1615.     }
  1616.     if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_STBITERR) != RESET)
  1617.     {
  1618.       hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
  1619.     }
  1620.  
  1621.     /* Clear All flags */
  1622.     __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS | SDIO_FLAG_STBITERR);
  1623.  
  1624.     /* Disable all interrupts */
  1625.     __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
  1626.                                SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
  1627.  
  1628.     hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
  1629.  
  1630.     if((context & MMC_CONTEXT_IT) != 0U)
  1631.     {
  1632.       /* Set the MMC state to ready to be able to start again the process */
  1633.       hmmc->State = HAL_MMC_STATE_READY;
  1634. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  1635.       hmmc->ErrorCallback(hmmc);
  1636. #else
  1637.       HAL_MMC_ErrorCallback(hmmc);
  1638. #endif /* USE_HAL_MMC_REGISTER_CALLBACKS */
  1639.     }
  1640.     else if((context & MMC_CONTEXT_DMA) != 0U)
  1641.     {
  1642.       /* Abort the MMC DMA Streams */
  1643.       if(hmmc->hdmatx != NULL)
  1644.       {
  1645.         /* Set the DMA Tx abort callback */
  1646.         hmmc->hdmatx->XferAbortCallback = MMC_DMATxAbort;
  1647.         /* Abort DMA in IT mode */
  1648.         if(HAL_DMA_Abort_IT(hmmc->hdmatx) != HAL_OK)
  1649.         {
  1650.           MMC_DMATxAbort(hmmc->hdmatx);
  1651.         }
  1652.       }
  1653.       else if(hmmc->hdmarx != NULL)
  1654.       {
  1655.         /* Set the DMA Rx abort callback */
  1656.         hmmc->hdmarx->XferAbortCallback = MMC_DMARxAbort;
  1657.         /* Abort DMA in IT mode */
  1658.         if(HAL_DMA_Abort_IT(hmmc->hdmarx) != HAL_OK)
  1659.         {
  1660.           MMC_DMARxAbort(hmmc->hdmarx);
  1661.         }
  1662.       }
  1663.       else
  1664.       {
  1665.         hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  1666.         hmmc->State = HAL_MMC_STATE_READY;
  1667. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  1668.         hmmc->AbortCpltCallback(hmmc);
  1669. #else
  1670.         HAL_MMC_AbortCallback(hmmc);
  1671. #endif
  1672.       }
  1673.     }
  1674.     else
  1675.     {
  1676.       /* Nothing to do */
  1677.     }
  1678.   }
  1679.  
  1680.   else
  1681.   {
  1682.     /* Nothing to do */
  1683.   }
  1684. }
  1685.  
  1686. /**
  1687.   * @brief return the MMC state
  1688.   * @param hmmc: Pointer to mmc handle
  1689.   * @retval HAL state
  1690.   */
  1691. HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc)
  1692. {
  1693.   return hmmc->State;
  1694. }
  1695.  
  1696. /**
  1697. * @brief  Return the MMC error code
  1698. * @param  hmmc : Pointer to a MMC_HandleTypeDef structure that contains
  1699.   *              the configuration information.
  1700. * @retval MMC Error Code
  1701. */
  1702. uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc)
  1703. {
  1704.   return hmmc->ErrorCode;
  1705. }
  1706.  
  1707. /**
  1708.   * @brief Tx Transfer completed callbacks
  1709.   * @param hmmc: Pointer to MMC handle
  1710.   * @retval None
  1711.   */
  1712. __weak void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc)
  1713. {
  1714.   /* Prevent unused argument(s) compilation warning */
  1715.   UNUSED(hmmc);
  1716.  
  1717.   /* NOTE : This function should not be modified, when the callback is needed,
  1718.             the HAL_MMC_TxCpltCallback can be implemented in the user file
  1719.    */
  1720. }
  1721.  
  1722. /**
  1723.   * @brief Rx Transfer completed callbacks
  1724.   * @param hmmc: Pointer MMC handle
  1725.   * @retval None
  1726.   */
  1727. __weak void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc)
  1728. {
  1729.   /* Prevent unused argument(s) compilation warning */
  1730.   UNUSED(hmmc);
  1731.  
  1732.   /* NOTE : This function should not be modified, when the callback is needed,
  1733.             the HAL_MMC_RxCpltCallback can be implemented in the user file
  1734.    */
  1735. }
  1736.  
  1737. /**
  1738.   * @brief MMC error callbacks
  1739.   * @param hmmc: Pointer MMC handle
  1740.   * @retval None
  1741.   */
  1742. __weak void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc)
  1743. {
  1744.   /* Prevent unused argument(s) compilation warning */
  1745.   UNUSED(hmmc);
  1746.  
  1747.   /* NOTE : This function should not be modified, when the callback is needed,
  1748.             the HAL_MMC_ErrorCallback can be implemented in the user file
  1749.    */
  1750. }
  1751.  
  1752. /**
  1753.   * @brief MMC Abort callbacks
  1754.   * @param hmmc: Pointer MMC handle
  1755.   * @retval None
  1756.   */
  1757. __weak void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc)
  1758. {
  1759.   /* Prevent unused argument(s) compilation warning */
  1760.   UNUSED(hmmc);
  1761.  
  1762.   /* NOTE : This function should not be modified, when the callback is needed,
  1763.             the HAL_MMC_AbortCallback can be implemented in the user file
  1764.    */
  1765. }
  1766.  
  1767. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  1768. /**
  1769.   * @brief  Register a User MMC Callback
  1770.   *         To be used instead of the weak (surcharged) predefined callback
  1771.   * @param hmmc : MMC handle
  1772.   * @param CallbackId : ID of the callback to be registered
  1773.   *        This parameter can be one of the following values:
  1774.   *          @arg @ref HAL_MMC_TX_CPLT_CB_ID    MMC Tx Complete Callback ID
  1775.   *          @arg @ref HAL_MMC_RX_CPLT_CB_ID    MMC Rx Complete Callback ID
  1776.   *          @arg @ref HAL_MMC_ERROR_CB_ID      MMC Error Callback ID
  1777.   *          @arg @ref HAL_MMC_ABORT_CB_ID      MMC Abort Callback ID
  1778.   *          @arg @ref HAL_MMC_MSP_INIT_CB_ID   MMC MspInit Callback ID
  1779.   *          @arg @ref HAL_MMC_MSP_DEINIT_CB_ID MMC MspDeInit Callback ID
  1780.   * @param pCallback : pointer to the Callback function
  1781.   * @retval status
  1782.   */
  1783. HAL_StatusTypeDef HAL_MMC_RegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback)
  1784. {
  1785.   HAL_StatusTypeDef status = HAL_OK;
  1786.  
  1787.   if(pCallback == NULL)
  1788.   {
  1789.     /* Update the error code */
  1790.     hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
  1791.     return HAL_ERROR;
  1792.   }
  1793.  
  1794.   /* Process locked */
  1795.   __HAL_LOCK(hmmc);
  1796.  
  1797.   if(hmmc->State == HAL_MMC_STATE_READY)
  1798.   {
  1799.     switch (CallbackId)
  1800.     {
  1801.     case HAL_MMC_TX_CPLT_CB_ID :
  1802.       hmmc->TxCpltCallback = pCallback;
  1803.       break;
  1804.     case HAL_MMC_RX_CPLT_CB_ID :
  1805.       hmmc->RxCpltCallback = pCallback;
  1806.       break;
  1807.     case HAL_MMC_ERROR_CB_ID :
  1808.       hmmc->ErrorCallback = pCallback;
  1809.       break;
  1810.     case HAL_MMC_ABORT_CB_ID :
  1811.       hmmc->AbortCpltCallback = pCallback;
  1812.       break;
  1813.     case HAL_MMC_MSP_INIT_CB_ID :
  1814.       hmmc->MspInitCallback = pCallback;
  1815.       break;
  1816.     case HAL_MMC_MSP_DEINIT_CB_ID :
  1817.       hmmc->MspDeInitCallback = pCallback;
  1818.       break;
  1819.     default :
  1820.       /* Update the error code */
  1821.       hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
  1822.       /* update return status */
  1823.       status =  HAL_ERROR;
  1824.       break;
  1825.     }
  1826.   }
  1827.   else if (hmmc->State == HAL_MMC_STATE_RESET)
  1828.   {
  1829.     switch (CallbackId)
  1830.     {
  1831.     case HAL_MMC_MSP_INIT_CB_ID :
  1832.       hmmc->MspInitCallback = pCallback;
  1833.       break;
  1834.     case HAL_MMC_MSP_DEINIT_CB_ID :
  1835.       hmmc->MspDeInitCallback = pCallback;
  1836.       break;
  1837.     default :
  1838.       /* Update the error code */
  1839.       hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
  1840.       /* update return status */
  1841.       status =  HAL_ERROR;
  1842.       break;
  1843.     }
  1844.   }
  1845.   else
  1846.   {
  1847.     /* Update the error code */
  1848.     hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
  1849.     /* update return status */
  1850.     status =  HAL_ERROR;
  1851.   }
  1852.  
  1853.   /* Release Lock */
  1854.   __HAL_UNLOCK(hmmc);
  1855.   return status;
  1856. }
  1857.  
  1858. /**
  1859.   * @brief  Unregister a User MMC Callback
  1860.   *         MMC Callback is redirected to the weak (surcharged) predefined callback
  1861.   * @param hmmc : MMC handle
  1862.   * @param CallbackId : ID of the callback to be unregistered
  1863.   *        This parameter can be one of the following values:
  1864.   *          @arg @ref HAL_MMC_TX_CPLT_CB_ID    MMC Tx Complete Callback ID
  1865.   *          @arg @ref HAL_MMC_RX_CPLT_CB_ID    MMC Rx Complete Callback ID
  1866.   *          @arg @ref HAL_MMC_ERROR_CB_ID      MMC Error Callback ID
  1867.   *          @arg @ref HAL_MMC_ABORT_CB_ID      MMC Abort Callback ID
  1868.   *          @arg @ref HAL_MMC_MSP_INIT_CB_ID   MMC MspInit Callback ID
  1869.   *          @arg @ref HAL_MMC_MSP_DEINIT_CB_ID MMC MspDeInit Callback ID
  1870.   * @retval status
  1871.   */
  1872. HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId)
  1873. {
  1874.   HAL_StatusTypeDef status = HAL_OK;
  1875.  
  1876.   /* Process locked */
  1877.   __HAL_LOCK(hmmc);
  1878.  
  1879.   if(hmmc->State == HAL_MMC_STATE_READY)
  1880.   {
  1881.     switch (CallbackId)
  1882.     {
  1883.     case HAL_MMC_TX_CPLT_CB_ID :
  1884.       hmmc->TxCpltCallback = HAL_MMC_TxCpltCallback;
  1885.       break;
  1886.     case HAL_MMC_RX_CPLT_CB_ID :
  1887.       hmmc->RxCpltCallback = HAL_MMC_RxCpltCallback;
  1888.       break;
  1889.     case HAL_MMC_ERROR_CB_ID :
  1890.       hmmc->ErrorCallback = HAL_MMC_ErrorCallback;
  1891.       break;
  1892.     case HAL_MMC_ABORT_CB_ID :
  1893.       hmmc->AbortCpltCallback = HAL_MMC_AbortCallback;
  1894.       break;
  1895.     case HAL_MMC_MSP_INIT_CB_ID :
  1896.       hmmc->MspInitCallback = HAL_MMC_MspInit;
  1897.       break;
  1898.     case HAL_MMC_MSP_DEINIT_CB_ID :
  1899.       hmmc->MspDeInitCallback = HAL_MMC_MspDeInit;
  1900.       break;
  1901.     default :
  1902.       /* Update the error code */
  1903.       hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
  1904.       /* update return status */
  1905.       status =  HAL_ERROR;
  1906.       break;
  1907.     }
  1908.   }
  1909.   else if (hmmc->State == HAL_MMC_STATE_RESET)
  1910.   {
  1911.     switch (CallbackId)
  1912.     {
  1913.     case HAL_MMC_MSP_INIT_CB_ID :
  1914.       hmmc->MspInitCallback = HAL_MMC_MspInit;
  1915.       break;
  1916.     case HAL_MMC_MSP_DEINIT_CB_ID :
  1917.       hmmc->MspDeInitCallback = HAL_MMC_MspDeInit;
  1918.       break;
  1919.     default :
  1920.       /* Update the error code */
  1921.       hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
  1922.       /* update return status */
  1923.       status =  HAL_ERROR;
  1924.       break;
  1925.     }
  1926.   }
  1927.   else
  1928.   {
  1929.     /* Update the error code */
  1930.     hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
  1931.     /* update return status */
  1932.     status =  HAL_ERROR;
  1933.   }
  1934.  
  1935.   /* Release Lock */
  1936.   __HAL_UNLOCK(hmmc);
  1937.   return status;
  1938. }
  1939. #endif
  1940.  
  1941. /**
  1942.   * @}
  1943.   */
  1944.  
  1945. /** @addtogroup MMC_Exported_Functions_Group3
  1946.  *  @brief   management functions
  1947.  *
  1948. @verbatim
  1949.   ==============================================================================
  1950.                       ##### Peripheral Control functions #####
  1951.   ==============================================================================
  1952.   [..]
  1953.     This subsection provides a set of functions allowing to control the MMC card
  1954.     operations and get the related information
  1955.  
  1956. @endverbatim
  1957.   * @{
  1958.   */
  1959.  
  1960. /**
  1961.   * @brief  Returns information the information of the card which are stored on
  1962.   *         the CID register.
  1963.   * @param  hmmc: Pointer to MMC handle
  1964.   * @param  pCID: Pointer to a HAL_MMC_CIDTypedef structure that
  1965.   *         contains all CID register parameters
  1966.   * @retval HAL status
  1967.   */
  1968. HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID)
  1969. {
  1970.   pCID->ManufacturerID = (uint8_t)((hmmc->CID[0] & 0xFF000000U) >> 24U);
  1971.  
  1972.   pCID->OEM_AppliID = (uint16_t)((hmmc->CID[0] & 0x00FFFF00U) >> 8U);
  1973.  
  1974.   pCID->ProdName1 = (((hmmc->CID[0] & 0x000000FFU) << 24U) | ((hmmc->CID[1] & 0xFFFFFF00U) >> 8U));
  1975.  
  1976.   pCID->ProdName2 = (uint8_t)(hmmc->CID[1] & 0x000000FFU);
  1977.  
  1978.   pCID->ProdRev = (uint8_t)((hmmc->CID[2] & 0xFF000000U) >> 24U);
  1979.  
  1980.   pCID->ProdSN = (((hmmc->CID[2] & 0x00FFFFFFU) << 8U) | ((hmmc->CID[3] & 0xFF000000U) >> 24U));
  1981.  
  1982.   pCID->Reserved1 = (uint8_t)((hmmc->CID[3] & 0x00F00000U) >> 20U);
  1983.  
  1984.   pCID->ManufactDate = (uint16_t)((hmmc->CID[3] & 0x000FFF00U) >> 8U);
  1985.  
  1986.   pCID->CID_CRC = (uint8_t)((hmmc->CID[3] & 0x000000FEU) >> 1U);
  1987.  
  1988.   pCID->Reserved2 = 1U;
  1989.  
  1990.   return HAL_OK;
  1991. }
  1992.  
  1993. /**
  1994.   * @brief  Returns information the information of the card which are stored on
  1995.   *         the CSD register.
  1996.   * @param  hmmc: Pointer to MMC handle
  1997.   * @param  pCSD: Pointer to a HAL_MMC_CardCSDTypeDef structure that
  1998.   *         contains all CSD register parameters
  1999.   * @retval HAL status
  2000.   */
  2001. HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD)
  2002. {
  2003.   pCSD->CSDStruct = (uint8_t)((hmmc->CSD[0] & 0xC0000000U) >> 30U);
  2004.  
  2005.   pCSD->SysSpecVersion = (uint8_t)((hmmc->CSD[0] & 0x3C000000U) >> 26U);
  2006.  
  2007.   pCSD->Reserved1 = (uint8_t)((hmmc->CSD[0] & 0x03000000U) >> 24U);
  2008.  
  2009.   pCSD->TAAC = (uint8_t)((hmmc->CSD[0] & 0x00FF0000U) >> 16U);
  2010.  
  2011.   pCSD->NSAC = (uint8_t)((hmmc->CSD[0] & 0x0000FF00U) >> 8U);
  2012.  
  2013.   pCSD->MaxBusClkFrec = (uint8_t)(hmmc->CSD[0] & 0x000000FFU);
  2014.  
  2015.   pCSD->CardComdClasses = (uint16_t)((hmmc->CSD[1] & 0xFFF00000U) >> 20U);
  2016.  
  2017.   pCSD->RdBlockLen = (uint8_t)((hmmc->CSD[1] & 0x000F0000U) >> 16U);
  2018.  
  2019.   pCSD->PartBlockRead   = (uint8_t)((hmmc->CSD[1] & 0x00008000U) >> 15U);
  2020.  
  2021.   pCSD->WrBlockMisalign = (uint8_t)((hmmc->CSD[1] & 0x00004000U) >> 14U);
  2022.  
  2023.   pCSD->RdBlockMisalign = (uint8_t)((hmmc->CSD[1] & 0x00002000U) >> 13U);
  2024.  
  2025.   pCSD->DSRImpl = (uint8_t)((hmmc->CSD[1] & 0x00001000U) >> 12U);
  2026.  
  2027.   pCSD->Reserved2 = 0U; /*!< Reserved */
  2028.  
  2029.   pCSD->DeviceSize = (((hmmc->CSD[1] & 0x000003FFU) << 2U) | ((hmmc->CSD[2] & 0xC0000000U) >> 30U));
  2030.  
  2031.   pCSD->MaxRdCurrentVDDMin = (uint8_t)((hmmc->CSD[2] & 0x38000000U) >> 27U);
  2032.  
  2033.   pCSD->MaxRdCurrentVDDMax = (uint8_t)((hmmc->CSD[2] & 0x07000000U) >> 24U);
  2034.  
  2035.   pCSD->MaxWrCurrentVDDMin = (uint8_t)((hmmc->CSD[2] & 0x00E00000U) >> 21U);
  2036.  
  2037.   pCSD->MaxWrCurrentVDDMax = (uint8_t)((hmmc->CSD[2] & 0x001C0000U) >> 18U);
  2038.  
  2039.   pCSD->DeviceSizeMul = (uint8_t)((hmmc->CSD[2] & 0x00038000U) >> 15U);
  2040.  
  2041.   hmmc->MmcCard.BlockNbr  = (pCSD->DeviceSize + 1U) ;
  2042.   hmmc->MmcCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U));
  2043.   hmmc->MmcCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU));
  2044.  
  2045.   hmmc->MmcCard.LogBlockNbr =  (hmmc->MmcCard.BlockNbr) * ((hmmc->MmcCard.BlockSize) / 512U);
  2046.   hmmc->MmcCard.LogBlockSize = 512U;
  2047.  
  2048.   pCSD->EraseGrSize = (uint8_t)((hmmc->CSD[2] & 0x00004000U) >> 14U);
  2049.  
  2050.   pCSD->EraseGrMul = (uint8_t)((hmmc->CSD[2] & 0x00003F80U) >> 7U);
  2051.  
  2052.   pCSD->WrProtectGrSize = (uint8_t)(hmmc->CSD[2] & 0x0000007FU);
  2053.  
  2054.   pCSD->WrProtectGrEnable = (uint8_t)((hmmc->CSD[3] & 0x80000000U) >> 31U);
  2055.  
  2056.   pCSD->ManDeflECC = (uint8_t)((hmmc->CSD[3] & 0x60000000U) >> 29U);
  2057.  
  2058.   pCSD->WrSpeedFact = (uint8_t)((hmmc->CSD[3] & 0x1C000000U) >> 26U);
  2059.  
  2060.   pCSD->MaxWrBlockLen= (uint8_t)((hmmc->CSD[3] & 0x03C00000U) >> 22U);
  2061.  
  2062.   pCSD->WriteBlockPaPartial = (uint8_t)((hmmc->CSD[3] & 0x00200000U) >> 21U);
  2063.  
  2064.   pCSD->Reserved3 = 0;
  2065.  
  2066.   pCSD->ContentProtectAppli = (uint8_t)((hmmc->CSD[3] & 0x00010000U) >> 16U);
  2067.  
  2068.   pCSD->FileFormatGroup = (uint8_t)((hmmc->CSD[3] & 0x00008000U) >> 15U);
  2069.  
  2070.   pCSD->CopyFlag = (uint8_t)((hmmc->CSD[3] & 0x00004000U) >> 14U);
  2071.  
  2072.   pCSD->PermWrProtect = (uint8_t)((hmmc->CSD[3] & 0x00002000U) >> 13U);
  2073.  
  2074.   pCSD->TempWrProtect = (uint8_t)((hmmc->CSD[3] & 0x00001000U) >> 12U);
  2075.  
  2076.   pCSD->FileFormat = (uint8_t)((hmmc->CSD[3] & 0x00000C00U) >> 10U);
  2077.  
  2078.   pCSD->ECC= (uint8_t)((hmmc->CSD[3] & 0x00000300U) >> 8U);
  2079.  
  2080.   pCSD->CSD_CRC = (uint8_t)((hmmc->CSD[3] & 0x000000FEU) >> 1U);
  2081.  
  2082.   pCSD->Reserved4 = 1;
  2083.  
  2084.   return HAL_OK;
  2085. }
  2086.  
  2087. /**
  2088.   * @brief  Gets the MMC card info.
  2089.   * @param  hmmc: Pointer to MMC handle
  2090.   * @param  pCardInfo: Pointer to the HAL_MMC_CardInfoTypeDef structure that
  2091.   *         will contain the MMC card status information
  2092.   * @retval HAL status
  2093.   */
  2094. HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo)
  2095. {
  2096.   pCardInfo->CardType     = (uint32_t)(hmmc->MmcCard.CardType);
  2097.   pCardInfo->Class        = (uint32_t)(hmmc->MmcCard.Class);
  2098.   pCardInfo->RelCardAdd   = (uint32_t)(hmmc->MmcCard.RelCardAdd);
  2099.   pCardInfo->BlockNbr     = (uint32_t)(hmmc->MmcCard.BlockNbr);
  2100.   pCardInfo->BlockSize    = (uint32_t)(hmmc->MmcCard.BlockSize);
  2101.   pCardInfo->LogBlockNbr  = (uint32_t)(hmmc->MmcCard.LogBlockNbr);
  2102.   pCardInfo->LogBlockSize = (uint32_t)(hmmc->MmcCard.LogBlockSize);
  2103.  
  2104.   return HAL_OK;
  2105. }
  2106.  
  2107. /**
  2108.   * @brief  Enables wide bus operation for the requested card if supported by
  2109.   *         card.
  2110.   * @param  hmmc: Pointer to MMC handle
  2111.   * @param  WideMode: Specifies the MMC card wide bus mode
  2112.   *          This parameter can be one of the following values:
  2113.   *            @arg SDIO_BUS_WIDE_8B: 8-bit data transfer
  2114.   *            @arg SDIO_BUS_WIDE_4B: 4-bit data transfer
  2115.   *            @arg SDIO_BUS_WIDE_1B: 1-bit data transfer
  2116.   * @retval HAL status
  2117.   */
  2118. HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode)
  2119. {
  2120.   __IO uint32_t count = 0U;
  2121.   SDIO_InitTypeDef Init;
  2122.   uint32_t errorstate;
  2123.   uint32_t response = 0U, busy = 0U;
  2124.  
  2125.   /* Check the parameters */
  2126.   assert_param(IS_SDIO_BUS_WIDE(WideMode));
  2127.  
  2128.   /* Chnage Satte */
  2129.   hmmc->State = HAL_MMC_STATE_BUSY;
  2130.  
  2131.   /* Update Clock for Bus mode update */
  2132.   Init.ClockEdge           = SDIO_CLOCK_EDGE_RISING;
  2133.   Init.ClockBypass         = SDIO_CLOCK_BYPASS_DISABLE;
  2134.   Init.ClockPowerSave      = SDIO_CLOCK_POWER_SAVE_DISABLE;
  2135.   Init.BusWide             = WideMode;
  2136.   Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
  2137.   Init.ClockDiv            = SDIO_INIT_CLK_DIV;
  2138.   /* Initialize SDIO*/
  2139.   (void)SDIO_Init(hmmc->Instance, Init);
  2140.  
  2141.   if(WideMode == SDIO_BUS_WIDE_8B)
  2142.   {
  2143.     errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70200U);
  2144.     if(errorstate != HAL_MMC_ERROR_NONE)
  2145.     {
  2146.       hmmc->ErrorCode |= errorstate;
  2147.     }
  2148.   }
  2149.   else if(WideMode == SDIO_BUS_WIDE_4B)
  2150.   {
  2151.     errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70100U);
  2152.     if(errorstate != HAL_MMC_ERROR_NONE)
  2153.     {
  2154.       hmmc->ErrorCode |= errorstate;
  2155.     }
  2156.   }
  2157.   else if(WideMode == SDIO_BUS_WIDE_1B)
  2158.   {
  2159.     errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70000U);
  2160.     if(errorstate != HAL_MMC_ERROR_NONE)
  2161.     {
  2162.       hmmc->ErrorCode |= errorstate;
  2163.     }
  2164.   }
  2165.   else
  2166.   {
  2167.     /* WideMode is not a valid argument*/
  2168.     hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
  2169.   }
  2170.  
  2171.   /* Check for switch error and violation of the trial number of sending CMD 13 */
  2172.   while(busy == 0U)
  2173.   {
  2174.     if(count == SDMMC_MAX_TRIAL)
  2175.     {
  2176.       hmmc->State = HAL_MMC_STATE_READY;
  2177.       hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE;
  2178.       return HAL_ERROR;
  2179.     }
  2180.     count++;
  2181.  
  2182.     /* While card is not ready for data and trial number for sending CMD13 is not exceeded */
  2183.     errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U));
  2184.     if(errorstate != HAL_MMC_ERROR_NONE)
  2185.     {
  2186.       hmmc->ErrorCode |= errorstate;
  2187.     }
  2188.  
  2189.     /* Get command response */
  2190.     response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
  2191.  
  2192.     /* Get operating voltage*/
  2193.     busy = (((response >> 7U) == 1U) ? 0U : 1U);
  2194.   }
  2195.  
  2196.   /* While card is not ready for data and trial number for sending CMD13 is not exceeded */
  2197.   count = SDMMC_DATATIMEOUT;
  2198.   while((response & 0x00000100U) == 0U)
  2199.   {
  2200.     if(count == 0U)
  2201.     {
  2202.       hmmc->State = HAL_MMC_STATE_READY;
  2203.       hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE;
  2204.       return HAL_ERROR;
  2205.     }
  2206.     count--;
  2207.  
  2208.     /* While card is not ready for data and trial number for sending CMD13 is not exceeded */
  2209.     errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U));
  2210.     if(errorstate != HAL_MMC_ERROR_NONE)
  2211.     {
  2212.       hmmc->ErrorCode |= errorstate;
  2213.     }
  2214.  
  2215.     /* Get command response */
  2216.     response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
  2217.   }
  2218.  
  2219.   if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
  2220.   {
  2221.     /* Clear all the static flags */
  2222.     __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  2223.     hmmc->State = HAL_MMC_STATE_READY;
  2224.     return HAL_ERROR;
  2225.   }
  2226.   else
  2227.   {
  2228.     /* Configure the SDIO peripheral */
  2229.     Init.ClockEdge           = hmmc->Init.ClockEdge;
  2230.     Init.ClockBypass         = hmmc->Init.ClockBypass;
  2231.     Init.ClockPowerSave      = hmmc->Init.ClockPowerSave;
  2232.     Init.BusWide             = WideMode;
  2233.     Init.HardwareFlowControl = hmmc->Init.HardwareFlowControl;
  2234.     Init.ClockDiv            = hmmc->Init.ClockDiv;
  2235.     (void)SDIO_Init(hmmc->Instance, Init);
  2236.   }
  2237.  
  2238.   /* Change State */
  2239.   hmmc->State = HAL_MMC_STATE_READY;
  2240.  
  2241.   return HAL_OK;
  2242. }
  2243.  
  2244. /**
  2245.   * @brief  Gets the current mmc card data state.
  2246.   * @param  hmmc: pointer to MMC handle
  2247.   * @retval Card state
  2248.   */
  2249. HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc)
  2250. {
  2251.   uint32_t cardstate;
  2252.   uint32_t errorstate;
  2253.   uint32_t resp1 = 0U;
  2254.  
  2255.   errorstate = MMC_SendStatus(hmmc, &resp1);
  2256.   if(errorstate != HAL_MMC_ERROR_NONE)
  2257.   {
  2258.     hmmc->ErrorCode |= errorstate;
  2259.   }
  2260.  
  2261.   cardstate = ((resp1 >> 9U) & 0x0FU);
  2262.  
  2263.   return (HAL_MMC_CardStateTypeDef)cardstate;
  2264. }
  2265.  
  2266. /**
  2267.   * @brief  Abort the current transfer and disable the MMC.
  2268.   * @param  hmmc: pointer to a MMC_HandleTypeDef structure that contains
  2269.   *                the configuration information for MMC module.
  2270.   * @retval HAL status
  2271.   */
  2272. HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc)
  2273. {
  2274.   HAL_MMC_CardStateTypeDef CardState;
  2275.  
  2276.   /* DIsable All interrupts */
  2277.   __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
  2278.                              SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
  2279.  
  2280.   /* Clear All flags */
  2281.   __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
  2282.  
  2283.   if((hmmc->hdmatx != NULL) || (hmmc->hdmarx != NULL))
  2284.   {
  2285.     /* Disable the MMC DMA request */
  2286.     hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
  2287.    
  2288.     /* Abort the MMC DMA Tx Stream */
  2289.     if(hmmc->hdmatx != NULL)
  2290.     {
  2291.       if(HAL_DMA_Abort(hmmc->hdmatx) != HAL_OK)
  2292.       {
  2293.         hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
  2294.       }
  2295.     }
  2296.     /* Abort the MMC DMA Rx Stream */
  2297.     if(hmmc->hdmarx != NULL)
  2298.     {
  2299.       if(HAL_DMA_Abort(hmmc->hdmarx) != HAL_OK)
  2300.       {
  2301.         hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
  2302.       }
  2303.     }
  2304.   }
  2305.  
  2306.   hmmc->State = HAL_MMC_STATE_READY;
  2307.  
  2308.   /* Initialize the MMC operation */
  2309.   hmmc->Context = MMC_CONTEXT_NONE;
  2310.  
  2311.   CardState = HAL_MMC_GetCardState(hmmc);
  2312.   if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
  2313.   {
  2314.     hmmc->ErrorCode = SDMMC_CmdStopTransfer(hmmc->Instance);
  2315.   }
  2316.   if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
  2317.   {
  2318.     return HAL_ERROR;
  2319.   }
  2320.   return HAL_OK;
  2321. }
  2322.  
  2323. /**
  2324.   * @brief  Abort the current transfer and disable the MMC (IT mode).
  2325.   * @param  hmmc: pointer to a MMC_HandleTypeDef structure that contains
  2326.   *                the configuration information for MMC module.
  2327.   * @retval HAL status
  2328.   */
  2329. HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc)
  2330. {
  2331.   HAL_MMC_CardStateTypeDef CardState;
  2332.  
  2333.   /* DIsable All interrupts */
  2334.   __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
  2335.                            SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
  2336.  
  2337.   /* Clear All flags */
  2338.   __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
  2339.  
  2340.   if((hmmc->hdmatx != NULL) || (hmmc->hdmarx != NULL))
  2341.   {
  2342.     /* Disable the MMC DMA request */
  2343.     hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
  2344.    
  2345.     /* Abort the MMC DMA Tx Stream */
  2346.     if(hmmc->hdmatx != NULL)
  2347.     {
  2348.       hmmc->hdmatx->XferAbortCallback =  MMC_DMATxAbort;
  2349.       if(HAL_DMA_Abort_IT(hmmc->hdmatx) != HAL_OK)
  2350.       {
  2351.         hmmc->hdmatx = NULL;
  2352.       }
  2353.     }
  2354.     /* Abort the MMC DMA Rx Stream */
  2355.     if(hmmc->hdmarx != NULL)
  2356.     {
  2357.       hmmc->hdmarx->XferAbortCallback =  MMC_DMARxAbort;
  2358.       if(HAL_DMA_Abort_IT(hmmc->hdmarx) != HAL_OK)
  2359.       {
  2360.         hmmc->hdmarx = NULL;
  2361.       }
  2362.     }
  2363.   }
  2364.  
  2365.   /* No transfer ongoing on both DMA channels*/
  2366.   if((hmmc->hdmatx == NULL) && (hmmc->hdmarx == NULL))
  2367.   {
  2368.     CardState = HAL_MMC_GetCardState(hmmc);
  2369.     hmmc->State = HAL_MMC_STATE_READY;
  2370.  
  2371.     if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
  2372.     {
  2373.       hmmc->ErrorCode = SDMMC_CmdStopTransfer(hmmc->Instance);
  2374.     }
  2375.     if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
  2376.     {
  2377.       return HAL_ERROR;
  2378.     }
  2379.     else
  2380.     {
  2381. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  2382.       hmmc->AbortCpltCallback(hmmc);
  2383. #else
  2384.       HAL_MMC_AbortCallback(hmmc);
  2385. #endif
  2386.     }
  2387.   }
  2388.  
  2389.   return HAL_OK;
  2390. }
  2391.  
  2392. /**
  2393.   * @}
  2394.   */
  2395.  
  2396. /**
  2397.   * @}
  2398.   */
  2399.  
  2400. /* Private function ----------------------------------------------------------*/
  2401. /** @addtogroup MMC_Private_Functions
  2402.   * @{
  2403.   */
  2404.  
  2405. /**
  2406.   * @brief  DMA MMC transmit process complete callback
  2407.   * @param  hdma: DMA handle
  2408.   * @retval None
  2409.   */
  2410. static void MMC_DMATransmitCplt(DMA_HandleTypeDef *hdma)    
  2411. {
  2412.   MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
  2413.  
  2414.   /* Enable DATAEND Interrupt */
  2415.   __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DATAEND));
  2416. }
  2417.  
  2418. /**
  2419.   * @brief  DMA MMC receive process complete callback
  2420.   * @param  hdma: DMA handle
  2421.   * @retval None
  2422.   */
  2423. static void MMC_DMAReceiveCplt(DMA_HandleTypeDef *hdma)  
  2424. {
  2425.   MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
  2426.   uint32_t errorstate;
  2427.  
  2428.   /* Send stop command in multiblock write */
  2429.   if(hmmc->Context == (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA))
  2430.   {
  2431.     errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
  2432.     if(errorstate != HAL_MMC_ERROR_NONE)
  2433.     {
  2434.       hmmc->ErrorCode |= errorstate;
  2435. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  2436.       hmmc->ErrorCallback(hmmc);
  2437. #else
  2438.       HAL_MMC_ErrorCallback(hmmc);
  2439. #endif
  2440.     }
  2441.   }
  2442.  
  2443.   /* Disable the DMA transfer for transmit request by setting the DMAEN bit
  2444.   in the MMC DCTRL register */
  2445.   hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
  2446.  
  2447.   /* Clear all the static flags */
  2448.   __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
  2449.  
  2450.   hmmc->State = HAL_MMC_STATE_READY;
  2451.  
  2452. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  2453.   hmmc->RxCpltCallback(hmmc);
  2454. #else
  2455.   HAL_MMC_RxCpltCallback(hmmc);
  2456. #endif
  2457. }
  2458.  
  2459. /**
  2460.   * @brief  DMA MMC communication error callback
  2461.   * @param  hdma: DMA handle
  2462.   * @retval None
  2463.   */
  2464. static void MMC_DMAError(DMA_HandleTypeDef *hdma)  
  2465. {
  2466.   MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
  2467.   HAL_MMC_CardStateTypeDef CardState;
  2468.   uint32_t RxErrorCode, TxErrorCode;
  2469.  
  2470.     RxErrorCode = hmmc->hdmarx->ErrorCode;
  2471.     TxErrorCode = hmmc->hdmatx->ErrorCode;  
  2472.     if((RxErrorCode == HAL_DMA_ERROR_TE) || (TxErrorCode == HAL_DMA_ERROR_TE))
  2473.     {
  2474.       /* Clear All flags */
  2475.       __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
  2476.      
  2477.       /* Disable All interrupts */
  2478.       __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
  2479.         SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
  2480.      
  2481.       hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
  2482.       CardState = HAL_MMC_GetCardState(hmmc);
  2483.       if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
  2484.       {
  2485.         hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
  2486.       }
  2487.      
  2488.       hmmc->State= HAL_MMC_STATE_READY;
  2489.     }
  2490.    
  2491. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  2492.     hmmc->ErrorCallback(hmmc);
  2493. #else
  2494.     HAL_MMC_ErrorCallback(hmmc);
  2495. #endif
  2496. }
  2497.  
  2498. /**
  2499.   * @brief  DMA MMC Tx Abort callback
  2500.   * @param  hdma: DMA handle
  2501.   * @retval None
  2502.   */
  2503. static void MMC_DMATxAbort(DMA_HandleTypeDef *hdma)  
  2504. {
  2505.   MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
  2506.   HAL_MMC_CardStateTypeDef CardState;
  2507.  
  2508.   if(hmmc->hdmatx != NULL)
  2509.   {
  2510.     hmmc->hdmatx = NULL;
  2511.   }
  2512.  
  2513.   /* All DMA channels are aborted */
  2514.   if(hmmc->hdmarx == NULL)
  2515.   {
  2516.     CardState = HAL_MMC_GetCardState(hmmc);
  2517.     hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  2518.     hmmc->State = HAL_MMC_STATE_READY;
  2519.     if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
  2520.     {
  2521.       hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
  2522.      
  2523.       if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
  2524.       {
  2525. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  2526.         hmmc->AbortCpltCallback(hmmc);
  2527. #else
  2528.         HAL_MMC_AbortCallback(hmmc);
  2529. #endif
  2530.       }
  2531.       else
  2532.       {
  2533. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  2534.         hmmc->ErrorCallback(hmmc);
  2535. #else
  2536.         HAL_MMC_ErrorCallback(hmmc);
  2537. #endif
  2538.       }
  2539.     }
  2540.   }
  2541. }
  2542.  
  2543. /**
  2544.   * @brief  DMA MMC Rx Abort callback
  2545.   * @param  hdma: DMA handle
  2546.   * @retval None
  2547.   */
  2548. static void MMC_DMARxAbort(DMA_HandleTypeDef *hdma)  
  2549. {
  2550.   MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
  2551.   HAL_MMC_CardStateTypeDef CardState;
  2552.  
  2553.   if(hmmc->hdmarx != NULL)
  2554.   {
  2555.     hmmc->hdmarx = NULL;
  2556.   }
  2557.  
  2558.   /* All DMA channels are aborted */
  2559.   if(hmmc->hdmatx == NULL)
  2560.   {
  2561.     CardState = HAL_MMC_GetCardState(hmmc);
  2562.     hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
  2563.     hmmc->State = HAL_MMC_STATE_READY;
  2564.     if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
  2565.     {
  2566.       hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
  2567.      
  2568.       if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
  2569.       {
  2570. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  2571.         hmmc->AbortCpltCallback(hmmc);
  2572. #else
  2573.         HAL_MMC_AbortCallback(hmmc);
  2574. #endif
  2575.       }
  2576.       else
  2577.       {
  2578. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  2579.         hmmc->ErrorCallback(hmmc);
  2580. #else
  2581.         HAL_MMC_ErrorCallback(hmmc);
  2582. #endif
  2583.       }
  2584.     }
  2585.   }
  2586. }
  2587.  
  2588. /**
  2589.   * @brief  Initializes the mmc card.
  2590.   * @param  hmmc: Pointer to MMC handle
  2591.   * @retval MMC Card error state
  2592.   */
  2593. static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc)
  2594. {
  2595.   HAL_MMC_CardCSDTypeDef CSD;
  2596.   uint32_t errorstate;
  2597.   uint16_t mmc_rca = 1U;
  2598.  
  2599.   /* Check the power State */
  2600.   if(SDIO_GetPowerState(hmmc->Instance) == 0U)
  2601.   {
  2602.     /* Power off */
  2603.     return HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE;
  2604.   }
  2605.  
  2606.   /* Send CMD2 ALL_SEND_CID */
  2607.   errorstate = SDMMC_CmdSendCID(hmmc->Instance);
  2608.   if(errorstate != HAL_MMC_ERROR_NONE)
  2609.   {
  2610.     return errorstate;
  2611.   }
  2612.   else
  2613.   {
  2614.     /* Get Card identification number data */
  2615.     hmmc->CID[0U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
  2616.     hmmc->CID[1U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP2);
  2617.     hmmc->CID[2U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP3);
  2618.     hmmc->CID[3U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP4);
  2619.   }
  2620.  
  2621.   /* Send CMD3 SET_REL_ADDR with argument 0 */
  2622.   /* MMC Card publishes its RCA. */
  2623.   errorstate = SDMMC_CmdSetRelAdd(hmmc->Instance, &mmc_rca);
  2624.   if(errorstate != HAL_MMC_ERROR_NONE)
  2625.   {
  2626.     return errorstate;
  2627.   }
  2628.  
  2629.   /* Get the MMC card RCA */
  2630.   hmmc->MmcCard.RelCardAdd = mmc_rca;
  2631.  
  2632.   /* Send CMD9 SEND_CSD with argument as card's RCA */
  2633.   errorstate = SDMMC_CmdSendCSD(hmmc->Instance, (uint32_t)(hmmc->MmcCard.RelCardAdd << 16U));
  2634.   if(errorstate != HAL_MMC_ERROR_NONE)
  2635.   {
  2636.     return errorstate;
  2637.   }
  2638.   else
  2639.   {
  2640.     /* Get Card Specific Data */
  2641.     hmmc->CSD[0U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
  2642.     hmmc->CSD[1U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP2);
  2643.     hmmc->CSD[2U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP3);
  2644.     hmmc->CSD[3U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP4);
  2645.   }
  2646.  
  2647.   /* Get the Card Class */
  2648.   hmmc->MmcCard.Class = (SDIO_GetResponse(hmmc->Instance, SDIO_RESP2) >> 20U);
  2649.  
  2650.   /* Get CSD parameters */
  2651.   if (HAL_MMC_GetCardCSD(hmmc, &CSD) != HAL_OK)
  2652.   {
  2653.     return hmmc->ErrorCode;
  2654.   }
  2655.  
  2656.   /* Select the Card */
  2657.   errorstate = SDMMC_CmdSelDesel(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U));
  2658.   if(errorstate != HAL_MMC_ERROR_NONE)
  2659.   {
  2660.     return errorstate;
  2661.   }
  2662.  
  2663.   /* Configure SDIO peripheral interface */
  2664.   (void)SDIO_Init(hmmc->Instance, hmmc->Init);
  2665.  
  2666.   /* All cards are initialized */
  2667.   return HAL_MMC_ERROR_NONE;
  2668. }
  2669.  
  2670. /**
  2671.   * @brief  Enquires cards about their operating voltage and configures clock
  2672.   *         controls and stores MMC information that will be needed in future
  2673.   *         in the MMC handle.
  2674.   * @param  hmmc: Pointer to MMC handle
  2675.   * @retval error state
  2676.   */
  2677. static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc)
  2678. {
  2679.   __IO uint32_t count = 0U;
  2680.   uint32_t response = 0U, validvoltage = 0U;
  2681.   uint32_t errorstate;
  2682.  
  2683.   /* CMD0: GO_IDLE_STATE */
  2684.   errorstate = SDMMC_CmdGoIdleState(hmmc->Instance);
  2685.   if(errorstate != HAL_MMC_ERROR_NONE)
  2686.   {
  2687.     return errorstate;
  2688.   }
  2689.  
  2690.   while(validvoltage == 0U)
  2691.   {
  2692.     if(count++ == SDMMC_MAX_VOLT_TRIAL)
  2693.     {
  2694.       return HAL_MMC_ERROR_INVALID_VOLTRANGE;
  2695.     }
  2696.  
  2697.     /* SEND CMD1 APP_CMD with MMC_HIGH_VOLTAGE_RANGE(0xC0FF8000) as argument */
  2698.     errorstate = SDMMC_CmdOpCondition(hmmc->Instance, eMMC_HIGH_VOLTAGE_RANGE);
  2699.     if(errorstate != HAL_MMC_ERROR_NONE)
  2700.     {
  2701.       return HAL_MMC_ERROR_UNSUPPORTED_FEATURE;
  2702.     }
  2703.  
  2704.     /* Get command response */
  2705.     response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
  2706.  
  2707.     /* Get operating voltage*/
  2708.     validvoltage = (((response >> 31U) == 1U) ? 1U : 0U);
  2709.   }
  2710.  
  2711.   /* When power routine is finished and command returns valid voltage */
  2712.   if (((response & (0xFF000000U)) >> 24) == 0xC0U)
  2713.   {
  2714.     hmmc->MmcCard.CardType = MMC_HIGH_CAPACITY_CARD;
  2715.   }
  2716.   else
  2717.   {
  2718.     hmmc->MmcCard.CardType = MMC_LOW_CAPACITY_CARD;
  2719.   }
  2720.  
  2721.   return HAL_MMC_ERROR_NONE;
  2722. }
  2723.  
  2724. /**
  2725.   * @brief  Turns the SDIO output signals off.
  2726.   * @param  hmmc: Pointer to MMC handle
  2727.   * @retval None
  2728.   */
  2729. static void MMC_PowerOFF(MMC_HandleTypeDef *hmmc)
  2730. {
  2731.   /* Set Power State to OFF */
  2732.   (void)SDIO_PowerState_OFF(hmmc->Instance);
  2733. }
  2734.  
  2735. /**
  2736.   * @brief  Returns the current card's status.
  2737.   * @param  hmmc: Pointer to MMC handle
  2738.   * @param  pCardStatus: pointer to the buffer that will contain the MMC card
  2739.   *         status (Card Status register)
  2740.   * @retval error state
  2741.   */
  2742. static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus)
  2743. {
  2744.   uint32_t errorstate;
  2745.  
  2746.   if(pCardStatus == NULL)
  2747.   {
  2748.     return HAL_MMC_ERROR_PARAM;
  2749.   }
  2750.  
  2751.   /* Send Status command */
  2752.   errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(hmmc->MmcCard.RelCardAdd << 16U));
  2753.   if(errorstate != HAL_MMC_ERROR_NONE)
  2754.   {
  2755.     return errorstate;
  2756.   }
  2757.  
  2758.   /* Get MMC card status */
  2759.   *pCardStatus = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
  2760.  
  2761.   return HAL_MMC_ERROR_NONE;
  2762. }
  2763.  
  2764. /**
  2765.   * @brief  Wrap up reading in non-blocking mode.
  2766.   * @param  hmmc: pointer to a MMC_HandleTypeDef structure that contains
  2767.   *              the configuration information.
  2768.   * @retval None
  2769.   */
  2770. static void MMC_Read_IT(MMC_HandleTypeDef *hmmc)
  2771. {
  2772.   uint32_t count, data, dataremaining;
  2773.   uint8_t* tmp;
  2774.  
  2775.   tmp = hmmc->pRxBuffPtr;
  2776.   dataremaining = hmmc->RxXferSize;
  2777.  
  2778.   if (dataremaining > 0U)
  2779.   {
  2780.     /* Read data from SDIO Rx FIFO */
  2781.     for(count = 0U; count < 8U; count++)
  2782.     {
  2783.       data = SDIO_ReadFIFO(hmmc->Instance);
  2784.       *tmp = (uint8_t)(data & 0xFFU);
  2785.       tmp++;
  2786.       dataremaining--;
  2787.       *tmp = (uint8_t)((data >> 8U) & 0xFFU);
  2788.       tmp++;
  2789.       dataremaining--;
  2790.       *tmp = (uint8_t)((data >> 16U) & 0xFFU);
  2791.       tmp++;
  2792.       dataremaining--;
  2793.       *tmp = (uint8_t)((data >> 24U) & 0xFFU);
  2794.       tmp++;
  2795.       dataremaining--;
  2796.     }
  2797.  
  2798.     hmmc->pRxBuffPtr = tmp;
  2799.     hmmc->RxXferSize = dataremaining;
  2800.   }
  2801. }
  2802.  
  2803. /**
  2804.   * @brief  Wrap up writing in non-blocking mode.
  2805.   * @param  hmmc: pointer to a MMC_HandleTypeDef structure that contains
  2806.   *              the configuration information.
  2807.   * @retval None
  2808.   */
  2809. static void MMC_Write_IT(MMC_HandleTypeDef *hmmc)
  2810. {
  2811.   uint32_t count, data, dataremaining;
  2812.   uint8_t* tmp;
  2813.  
  2814.   tmp = hmmc->pTxBuffPtr;
  2815.   dataremaining = hmmc->TxXferSize;
  2816.  
  2817.   if (dataremaining > 0U)
  2818.   {
  2819.     /* Write data to SDIO Tx FIFO */
  2820.     for(count = 0U; count < 8U; count++)
  2821.     {
  2822.       data = (uint32_t)(*tmp);
  2823.       tmp++;
  2824.       dataremaining--;
  2825.       data |= ((uint32_t)(*tmp) << 8U);
  2826.       tmp++;
  2827.       dataremaining--;
  2828.       data |= ((uint32_t)(*tmp) << 16U);
  2829.       tmp++;
  2830.       dataremaining--;
  2831.       data |= ((uint32_t)(*tmp) << 24U);
  2832.       tmp++;
  2833.       dataremaining--;
  2834.       (void)SDIO_WriteFIFO(hmmc->Instance, &data);
  2835.     }
  2836.  
  2837.     hmmc->pTxBuffPtr = tmp;
  2838.     hmmc->TxXferSize = dataremaining;
  2839.   }
  2840. }
  2841.  
  2842. /**
  2843.   * @}
  2844.   */
  2845.  
  2846. #endif /* SDIO */
  2847.  
  2848. #endif /* HAL_MMC_MODULE_ENABLED */
  2849.  
  2850. /**
  2851.   * @}
  2852.   */
  2853.  
  2854. /**
  2855.   * @}
  2856.   */
  2857.  
  2858. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
  2859.