/**
******************************************************************************
* @file stm32f1xx_hal_nand.h
* @author MCD Application Team
* @version V1.0.1
* @date 31-July-2015
* @brief Header file of NAND HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_NAND_H
#define __STM32F1xx_HAL_NAND_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_ll_fsmc.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
#if defined (STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
/** @addtogroup NAND
* @{
*/
/** @addtogroup NAND_Private_Constants
* @{
*/
#define NAND_DEVICE1 FSMC_BANK2
#define NAND_DEVICE2 FSMC_BANK3
#define NAND_WRITE_TIMEOUT ((uint32_t)1000)
#define CMD_AREA ((uint32_t)(1<<16)) /* A16 = CLE high */
#define ADDR_AREA ((uint32_t)(1<<17)) /* A17 = ALE high */
#define NAND_CMD_AREA_A ((uint8_t)0x00)
#define NAND_CMD_AREA_B ((uint8_t)0x01)
#define NAND_CMD_AREA_C ((uint8_t)0x50)
#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30)
#define NAND_CMD_WRITE0 ((uint8_t)0x80)
#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10)
#define NAND_CMD_ERASE0 ((uint8_t)0x60)
#define NAND_CMD_ERASE1 ((uint8_t)0xD0)
#define NAND_CMD_READID ((uint8_t)0x90)
#define NAND_CMD_STATUS ((uint8_t)0x70)
#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A)
#define NAND_CMD_RESET ((uint8_t)0xFF)
/* NAND memory status */
#define NAND_VALID_ADDRESS ((uint32_t)0x00000100)
#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200)
#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400)
#define NAND_BUSY ((uint32_t)0x00000000)
#define NAND_ERROR ((uint32_t)0x00000001)
#define NAND_READY ((uint32_t)0x00000040)
/**
* @}
*/
/** @addtogroup NAND_Private_Macros
* @{
*/
/**
* @brief NAND memory address computation.
* @param __ADDRESS__: NAND memory address.
* @param __HANDLE__ : NAND handle.
* @retval NAND Raw address value
*/
#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
(((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
/**
* @brief NAND memory address cycling.
* @param __ADDRESS__: NAND memory address.
* @retval NAND address cycling value.
*/
#define ADDR_1st_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */
#define ADDR_2nd_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */
#define ADDR_3rd_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */
#define ADDR_4th_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */
/**
* @}
*/
/* Exported typedef ----------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup NAND_Exported_Types NAND Exported Types
* @{
*/
/**
* @brief HAL NAND State structures definition
*/
typedef enum
{
HAL_NAND_STATE_RESET = 0x00, /*!< NAND not yet initialized or disabled */
HAL_NAND_STATE_READY = 0x01, /*!< NAND initialized and ready for use */
HAL_NAND_STATE_BUSY = 0x02, /*!< NAND internal process is ongoing */
HAL_NAND_STATE_ERROR = 0x03 /*!< NAND error state */
}HAL_NAND_StateTypeDef;
/**
* @brief NAND Memory electronic signature Structure definition
*/
typedef struct
{
/*<! NAND memory electronic signature maker and device IDs */
uint8_t Maker_Id;
uint8_t Device_Id;
uint8_t Third_Id;
uint8_t Fourth_Id;
}NAND_IDTypeDef;
/**
* @brief NAND Memory address Structure definition
*/
typedef struct
{
uint16_t Page; /*!< NAND memory Page address */
uint16_t Zone; /*!< NAND memory Zone address */
uint16_t Block; /*!< NAND memory Block address */
}NAND_AddressTypeDef;
/**
* @brief NAND Memory info Structure definition
*/
typedef struct
{
uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in K. bytes */
uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in K. bytes */
uint32_t BlockSize; /*!< NAND memory block size number of pages */
uint32_t BlockNbr; /*!< NAND memory number of blocks */
uint32_t ZoneSize; /*!< NAND memory zone size measured in number of blocks */
}NAND_InfoTypeDef;
/**
* @brief NAND handle Structure definition
*/
typedef struct
{
FSMC_NAND_TypeDef *Instance; /*!< Register base address */
FSMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
HAL_LockTypeDef Lock; /*!< NAND locking object */
__IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
NAND_InfoTypeDef Info; /*!< NAND characteristic information structure */
}NAND_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup NAND_Exported_Macros NAND Exported Macros
* @{
*/
/** @brief Reset NAND handle state
* @param __HANDLE__: specifies the NAND handle.
* @retval None
*/
#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup NAND_Exported_Functions NAND Exported Functions
* @{
*/
/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization/de-initialization functions ********************************/
HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FSMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FSMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
/**
* @}
*/
/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
* @{
*/
/* IO operation functions ****************************************************/
HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
/**
* @}
*/
/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
* @{
*/
/* NAND Control functions ****************************************************/
HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
/**
* @}
*/
/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions
* @{
*/
/* NAND State functions *******************************************************/
HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_NAND_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/