Subversion Repositories LedShow

Rev

Rev 2 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /**
  2.   ******************************************************************************
  3.   * @file    stm32f1xx_hal_mmc.h
  4.   * @author  MCD Application Team
  5.   * @brief   Header file of MMC HAL module.
  6.   ******************************************************************************
  7.   * @attention
  8.   *
  9.   * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
  10.   * All rights reserved.</center></h2>
  11.   *
  12.   * This software component is licensed by ST under BSD 3-Clause license,
  13.   * the "License"; You may not use this file except in compliance with the
  14.   * License. You may obtain a copy of the License at:
  15.   *                       opensource.org/licenses/BSD-3-Clause
  16.   *
  17.   ******************************************************************************
  18.   */
  19.  
  20. /* Define to prevent recursive inclusion -------------------------------------*/
  21. #ifndef STM32F1xx_HAL_MMC_H
  22. #define STM32F1xx_HAL_MMC_H
  23.  
  24. #if defined(SDIO)
  25.  
  26. #ifdef __cplusplus
  27.  extern "C" {
  28. #endif
  29.  
  30. /* Includes ------------------------------------------------------------------*/
  31. #include "stm32f1xx_ll_sdmmc.h"
  32.  
  33. /** @addtogroup STM32F1xx_HAL_Driver
  34.   * @{
  35.   */
  36.  
  37. /** @addtogroup MMC
  38.   * @{
  39.   */
  40.  
  41. /* Exported types ------------------------------------------------------------*/
  42. /** @defgroup MMC_Exported_Types MMC Exported Types
  43.   * @{
  44.   */
  45.  
  46. /** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure
  47.   * @{
  48.   */  
  49. typedef enum
  50. {
  51.   HAL_MMC_STATE_RESET                  = ((uint32_t)0x00000000U),  /*!< MMC not yet initialized or disabled  */
  52.   HAL_MMC_STATE_READY                  = ((uint32_t)0x00000001U),  /*!< MMC initialized and ready for use    */
  53.   HAL_MMC_STATE_TIMEOUT                = ((uint32_t)0x00000002U),  /*!< MMC Timeout state                    */
  54.   HAL_MMC_STATE_BUSY                   = ((uint32_t)0x00000003U),  /*!< MMC process ongoing                  */
  55.   HAL_MMC_STATE_PROGRAMMING            = ((uint32_t)0x00000004U),  /*!< MMC Programming State                */
  56.   HAL_MMC_STATE_RECEIVING              = ((uint32_t)0x00000005U),  /*!< MMC Receinving State                 */
  57.   HAL_MMC_STATE_TRANSFER               = ((uint32_t)0x00000006U),  /*!< MMC Transfert State                  */
  58.   HAL_MMC_STATE_ERROR                  = ((uint32_t)0x0000000FU)   /*!< MMC is in error state                */
  59. }HAL_MMC_StateTypeDef;
  60. /**
  61.   * @}
  62.   */
  63.  
  64. /** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure
  65.   * @{
  66.   */  
  67. typedef uint32_t HAL_MMC_CardStateTypeDef;
  68.  
  69. #define HAL_MMC_CARD_READY          0x00000001U  /*!< Card state is ready                     */
  70. #define HAL_MMC_CARD_IDENTIFICATION 0x00000002U  /*!< Card is in identification state         */
  71. #define HAL_MMC_CARD_STANDBY        0x00000003U  /*!< Card is in standby state                */
  72. #define HAL_MMC_CARD_TRANSFER       0x00000004U  /*!< Card is in transfer state               */
  73. #define HAL_MMC_CARD_SENDING        0x00000005U  /*!< Card is sending an operation            */
  74. #define HAL_MMC_CARD_RECEIVING      0x00000006U  /*!< Card is receiving operation information */
  75. #define HAL_MMC_CARD_PROGRAMMING    0x00000007U  /*!< Card is in programming state            */
  76. #define HAL_MMC_CARD_DISCONNECTED   0x00000008U  /*!< Card is disconnected                    */
  77. #define HAL_MMC_CARD_ERROR          0x000000FFU  /*!< Card response Error                     */
  78. /**
  79.   * @}
  80.   */
  81.  
  82. /** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition  
  83.   * @{
  84.   */
  85. #define MMC_InitTypeDef      SDIO_InitTypeDef
  86. #define MMC_TypeDef          SDIO_TypeDef
  87.  
  88. /**
  89.   * @brief  MMC Card Information Structure definition
  90.   */
  91. typedef struct
  92. {
  93.   uint32_t CardType;                     /*!< Specifies the card Type                         */
  94.  
  95.   uint32_t Class;                        /*!< Specifies the class of the card class           */
  96.  
  97.   uint32_t RelCardAdd;                   /*!< Specifies the Relative Card Address             */
  98.  
  99.   uint32_t BlockNbr;                     /*!< Specifies the Card Capacity in blocks           */
  100.  
  101.   uint32_t BlockSize;                    /*!< Specifies one block size in bytes               */
  102.  
  103.   uint32_t LogBlockNbr;                  /*!< Specifies the Card logical Capacity in blocks   */
  104.  
  105.   uint32_t LogBlockSize;                 /*!< Specifies logical block size in bytes           */
  106.  
  107. }HAL_MMC_CardInfoTypeDef;
  108.  
  109. /**
  110.   * @brief  MMC handle Structure definition
  111.   */
  112. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  113. typedef struct __MMC_HandleTypeDef
  114. #else
  115. typedef struct
  116. #endif /* USE_HAL_MMC_REGISTER_CALLBACKS */
  117. {
  118.   MMC_TypeDef                  *Instance;        /*!< MMC registers base address           */
  119.  
  120.   MMC_InitTypeDef              Init;             /*!< MMC required parameters              */
  121.  
  122.   HAL_LockTypeDef              Lock;             /*!< MMC locking object                   */
  123.  
  124.   uint8_t                      *pTxBuffPtr;      /*!< Pointer to MMC Tx transfer Buffer    */
  125.  
  126.   uint32_t                     TxXferSize;       /*!< MMC Tx Transfer size                 */
  127.  
  128.   uint8_t                      *pRxBuffPtr;      /*!< Pointer to MMC Rx transfer Buffer    */
  129.  
  130.   uint32_t                     RxXferSize;       /*!< MMC Rx Transfer size                 */
  131.  
  132.   __IO uint32_t                Context;          /*!< MMC transfer context                 */
  133.  
  134.   __IO HAL_MMC_StateTypeDef    State;            /*!< MMC card State                       */
  135.  
  136.   __IO uint32_t                ErrorCode;        /*!< MMC Card Error codes                 */  
  137.  
  138.   DMA_HandleTypeDef            *hdmarx;          /*!< MMC Rx DMA handle parameters         */
  139.  
  140.   DMA_HandleTypeDef            *hdmatx;          /*!< MMC Tx DMA handle parameters         */
  141.  
  142.   HAL_MMC_CardInfoTypeDef      MmcCard;          /*!< MMC Card information                 */
  143.  
  144.   uint32_t                     CSD[4U];          /*!< MMC card specific data table         */
  145.  
  146.   uint32_t                     CID[4U];          /*!< MMC card identification number table */
  147.  
  148. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  149.   void (* TxCpltCallback)                 (struct __MMC_HandleTypeDef *hmmc);
  150.   void (* RxCpltCallback)                 (struct __MMC_HandleTypeDef *hmmc);
  151.   void (* ErrorCallback)                  (struct __MMC_HandleTypeDef *hmmc);
  152.   void (* AbortCpltCallback)              (struct __MMC_HandleTypeDef *hmmc);
  153.  
  154.   void (* MspInitCallback)                (struct __MMC_HandleTypeDef *hmmc);
  155.   void (* MspDeInitCallback)              (struct __MMC_HandleTypeDef *hmmc);
  156. #endif  
  157. }MMC_HandleTypeDef;
  158.  
  159. /**
  160.   * @}
  161.   */
  162.  
  163. /** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register
  164.   * @{
  165.   */
  166. typedef struct
  167. {
  168.   __IO uint8_t  CSDStruct;            /*!< CSD structure                         */
  169.   __IO uint8_t  SysSpecVersion;       /*!< System specification version          */
  170.   __IO uint8_t  Reserved1;            /*!< Reserved                              */
  171.   __IO uint8_t  TAAC;                 /*!< Data read access time 1               */
  172.   __IO uint8_t  NSAC;                 /*!< Data read access time 2 in CLK cycles */
  173.   __IO uint8_t  MaxBusClkFrec;        /*!< Max. bus clock frequency              */
  174.   __IO uint16_t CardComdClasses;      /*!< Card command classes                  */
  175.   __IO uint8_t  RdBlockLen;           /*!< Max. read data block length           */
  176.   __IO uint8_t  PartBlockRead;        /*!< Partial blocks for read allowed       */
  177.   __IO uint8_t  WrBlockMisalign;      /*!< Write block misalignment              */
  178.   __IO uint8_t  RdBlockMisalign;      /*!< Read block misalignment               */
  179.   __IO uint8_t  DSRImpl;              /*!< DSR implemented                       */
  180.   __IO uint8_t  Reserved2;            /*!< Reserved                              */
  181.   __IO uint32_t DeviceSize;           /*!< Device Size                           */
  182.   __IO uint8_t  MaxRdCurrentVDDMin;   /*!< Max. read current @ VDD min           */
  183.   __IO uint8_t  MaxRdCurrentVDDMax;   /*!< Max. read current @ VDD max           */
  184.   __IO uint8_t  MaxWrCurrentVDDMin;   /*!< Max. write current @ VDD min          */
  185.   __IO uint8_t  MaxWrCurrentVDDMax;   /*!< Max. write current @ VDD max          */
  186.   __IO uint8_t  DeviceSizeMul;        /*!< Device size multiplier                */
  187.   __IO uint8_t  EraseGrSize;          /*!< Erase group size                      */
  188.   __IO uint8_t  EraseGrMul;           /*!< Erase group size multiplier           */
  189.   __IO uint8_t  WrProtectGrSize;      /*!< Write protect group size              */
  190.   __IO uint8_t  WrProtectGrEnable;    /*!< Write protect group enable            */
  191.   __IO uint8_t  ManDeflECC;           /*!< Manufacturer default ECC              */
  192.   __IO uint8_t  WrSpeedFact;          /*!< Write speed factor                    */
  193.   __IO uint8_t  MaxWrBlockLen;        /*!< Max. write data block length          */
  194.   __IO uint8_t  WriteBlockPaPartial;  /*!< Partial blocks for write allowed      */
  195.   __IO uint8_t  Reserved3;            /*!< Reserved                              */
  196.   __IO uint8_t  ContentProtectAppli;  /*!< Content protection application        */
  197.   __IO uint8_t  FileFormatGroup;      /*!< File format group                     */
  198.   __IO uint8_t  CopyFlag;             /*!< Copy flag (OTP)                       */
  199.   __IO uint8_t  PermWrProtect;        /*!< Permanent write protection            */
  200.   __IO uint8_t  TempWrProtect;        /*!< Temporary write protection            */
  201.   __IO uint8_t  FileFormat;           /*!< File format                           */
  202.   __IO uint8_t  ECC;                  /*!< ECC code                              */
  203.   __IO uint8_t  CSD_CRC;              /*!< CSD CRC                               */
  204.   __IO uint8_t  Reserved4;            /*!< Always 1                              */
  205.  
  206. }HAL_MMC_CardCSDTypeDef;
  207. /**
  208.   * @}
  209.   */
  210.  
  211. /** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register
  212.   * @{
  213.   */
  214. typedef struct
  215. {
  216.   __IO uint8_t  ManufacturerID;  /*!< Manufacturer ID       */
  217.   __IO uint16_t OEM_AppliID;     /*!< OEM/Application ID    */
  218.   __IO uint32_t ProdName1;       /*!< Product Name part1    */
  219.   __IO uint8_t  ProdName2;       /*!< Product Name part2    */
  220.   __IO uint8_t  ProdRev;         /*!< Product Revision      */
  221.   __IO uint32_t ProdSN;          /*!< Product Serial Number */
  222.   __IO uint8_t  Reserved1;       /*!< Reserved1             */
  223.   __IO uint16_t ManufactDate;    /*!< Manufacturing Date    */
  224.   __IO uint8_t  CID_CRC;         /*!< CID CRC               */
  225.   __IO uint8_t  Reserved2;       /*!< Always 1              */
  226.  
  227. }HAL_MMC_CardCIDTypeDef;
  228. /**
  229.   * @}
  230.   */
  231.  
  232. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  233. /** @defgroup MMC_Exported_Types_Group6 MMC Callback ID enumeration definition
  234.   * @{
  235.   */
  236. typedef enum
  237. {
  238.   HAL_MMC_TX_CPLT_CB_ID                 = 0x00U,  /*!< MMC Tx Complete Callback ID                     */
  239.   HAL_MMC_RX_CPLT_CB_ID                 = 0x01U,  /*!< MMC Rx Complete Callback ID                     */
  240.   HAL_MMC_ERROR_CB_ID                   = 0x02U,  /*!< MMC Error Callback ID                           */
  241.   HAL_MMC_ABORT_CB_ID                   = 0x03U,  /*!< MMC Abort Callback ID                           */
  242.  
  243.   HAL_MMC_MSP_INIT_CB_ID                = 0x10U,  /*!< MMC MspInit Callback ID                         */
  244.   HAL_MMC_MSP_DEINIT_CB_ID              = 0x11U   /*!< MMC MspDeInit Callback ID                       */
  245. }HAL_MMC_CallbackIDTypeDef;
  246. /**
  247.   * @}
  248.   */
  249.  
  250. /** @defgroup MMC_Exported_Types_Group7 MMC Callback pointer definition
  251.   * @{
  252.   */
  253. typedef void (*pMMC_CallbackTypeDef)           (MMC_HandleTypeDef *hmmc);
  254. /**
  255.   * @}
  256.   */
  257. #endif
  258. /**
  259.   * @}
  260.   */
  261.  
  262. /* Exported constants --------------------------------------------------------*/
  263. /** @defgroup MMC_Exported_Constants Exported Constants
  264.   * @{
  265.   */
  266.  
  267. #define MMC_BLOCKSIZE   ((uint32_t)512U) /*!< Block size is 512 bytes */
  268.  
  269. /** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition
  270.   * @{
  271.   */  
  272. #define HAL_MMC_ERROR_NONE                     SDMMC_ERROR_NONE                    /*!< No error                                                      */
  273. #define HAL_MMC_ERROR_CMD_CRC_FAIL             SDMMC_ERROR_CMD_CRC_FAIL            /*!< Command response received (but CRC check failed)              */
  274. #define HAL_MMC_ERROR_DATA_CRC_FAIL            SDMMC_ERROR_DATA_CRC_FAIL           /*!< Data block sent/received (CRC check failed)                   */
  275. #define HAL_MMC_ERROR_CMD_RSP_TIMEOUT          SDMMC_ERROR_CMD_RSP_TIMEOUT         /*!< Command response timeout                                      */
  276. #define HAL_MMC_ERROR_DATA_TIMEOUT             SDMMC_ERROR_DATA_TIMEOUT            /*!< Data timeout                                                  */
  277. #define HAL_MMC_ERROR_TX_UNDERRUN              SDMMC_ERROR_TX_UNDERRUN             /*!< Transmit FIFO underrun                                        */
  278. #define HAL_MMC_ERROR_RX_OVERRUN               SDMMC_ERROR_RX_OVERRUN              /*!< Receive FIFO overrun                                          */
  279. #define HAL_MMC_ERROR_ADDR_MISALIGNED          SDMMC_ERROR_ADDR_MISALIGNED         /*!< Misaligned address                                            */
  280. #define HAL_MMC_ERROR_BLOCK_LEN_ERR            SDMMC_ERROR_BLOCK_LEN_ERR           /*!< Transferred block length is not allowed for the card or the
  281.                                                                                        number of transferred bytes does not match the block length   */
  282. #define HAL_MMC_ERROR_ERASE_SEQ_ERR            SDMMC_ERROR_ERASE_SEQ_ERR           /*!< An error in the sequence of erase command occurs              */
  283. #define HAL_MMC_ERROR_BAD_ERASE_PARAM          SDMMC_ERROR_BAD_ERASE_PARAM         /*!< An invalid selection for erase groups                         */
  284. #define HAL_MMC_ERROR_WRITE_PROT_VIOLATION     SDMMC_ERROR_WRITE_PROT_VIOLATION    /*!< Attempt to program a write protect block                      */
  285. #define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED       SDMMC_ERROR_LOCK_UNLOCK_FAILED      /*!< Sequence or password error has been detected in unlock
  286.                                                                                        command or if there was an attempt to access a locked card    */
  287. #define HAL_MMC_ERROR_COM_CRC_FAILED           SDMMC_ERROR_COM_CRC_FAILED          /*!< CRC check of the previous command failed                      */
  288. #define HAL_MMC_ERROR_ILLEGAL_CMD              SDMMC_ERROR_ILLEGAL_CMD             /*!< Command is not legal for the card state                       */
  289. #define HAL_MMC_ERROR_CARD_ECC_FAILED          SDMMC_ERROR_CARD_ECC_FAILED         /*!< Card internal ECC was applied but failed to correct the data  */
  290. #define HAL_MMC_ERROR_CC_ERR                   SDMMC_ERROR_CC_ERR                  /*!< Internal card controller error                                */
  291. #define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR      SDMMC_ERROR_GENERAL_UNKNOWN_ERR     /*!< General or unknown error                                      */
  292. #define HAL_MMC_ERROR_STREAM_READ_UNDERRUN     SDMMC_ERROR_STREAM_READ_UNDERRUN    /*!< The card could not sustain data reading in stream rmode       */
  293. #define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN     SDMMC_ERROR_STREAM_WRITE_OVERRUN    /*!< The card could not sustain data programming in stream mode    */
  294. #define HAL_MMC_ERROR_CID_CSD_OVERWRITE        SDMMC_ERROR_CID_CSD_OVERWRITE       /*!< CID/CSD overwrite error                                       */
  295. #define HAL_MMC_ERROR_WP_ERASE_SKIP            SDMMC_ERROR_WP_ERASE_SKIP           /*!< Only partial address space was erased                         */
  296. #define HAL_MMC_ERROR_CARD_ECC_DISABLED        SDMMC_ERROR_CARD_ECC_DISABLED       /*!< Command has been executed without using internal ECC          */
  297. #define HAL_MMC_ERROR_ERASE_RESET              SDMMC_ERROR_ERASE_RESET             /*!< Erase sequence was cleared before executing because an out
  298.                                                                                        of erase sequence command was received                        */
  299. #define HAL_MMC_ERROR_AKE_SEQ_ERR              SDMMC_ERROR_AKE_SEQ_ERR             /*!< Error in sequence of authentication                           */
  300. #define HAL_MMC_ERROR_INVALID_VOLTRANGE        SDMMC_ERROR_INVALID_VOLTRANGE       /*!< Error in case of invalid voltage range                        */        
  301. #define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE        SDMMC_ERROR_ADDR_OUT_OF_RANGE       /*!< Error when addressed block is out of range                    */        
  302. #define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE   SDMMC_ERROR_REQUEST_NOT_APPLICABLE  /*!< Error when command request is not applicable                  */  
  303. #define HAL_MMC_ERROR_PARAM                    SDMMC_ERROR_INVALID_PARAMETER       /*!< the used parameter is not valid                               */  
  304. #define HAL_MMC_ERROR_UNSUPPORTED_FEATURE      SDMMC_ERROR_UNSUPPORTED_FEATURE     /*!< Error when feature is not insupported                         */
  305. #define HAL_MMC_ERROR_BUSY                     SDMMC_ERROR_BUSY                    /*!< Error when transfer process is busy                           */
  306. #define HAL_MMC_ERROR_DMA                      SDMMC_ERROR_DMA                     /*!< Error while DMA transfer                                      */
  307. #define HAL_MMC_ERROR_TIMEOUT                  SDMMC_ERROR_TIMEOUT                 /*!< Timeout error                                                 */
  308.                                                
  309. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  310. #define HAL_MMC_ERROR_INVALID_CALLBACK         SDMMC_ERROR_INVALID_PARAMETER       /*!< Invalid callback error                                        */
  311. #endif
  312. /**
  313.   * @}
  314.   */
  315.  
  316. /** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration
  317.   * @{
  318.   */
  319. #define   MMC_CONTEXT_NONE                 ((uint32_t)0x00000000U)  /*!< None                             */
  320. #define   MMC_CONTEXT_READ_SINGLE_BLOCK    ((uint32_t)0x00000001U)  /*!< Read single block operation      */
  321. #define   MMC_CONTEXT_READ_MULTIPLE_BLOCK  ((uint32_t)0x00000002U)  /*!< Read multiple blocks operation   */
  322. #define   MMC_CONTEXT_WRITE_SINGLE_BLOCK   ((uint32_t)0x00000010U)  /*!< Write single block operation     */
  323. #define   MMC_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U)  /*!< Write multiple blocks operation  */
  324. #define   MMC_CONTEXT_IT                   ((uint32_t)0x00000008U)  /*!< Process in Interrupt mode        */
  325. #define   MMC_CONTEXT_DMA                  ((uint32_t)0x00000080U)  /*!< Process in DMA mode              */
  326.  
  327. /**
  328.   * @}
  329.   */
  330.  
  331. /** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode
  332.   * @{
  333.   */
  334. /**
  335.   * @brief
  336.   */
  337. #define MMC_HIGH_VOLTAGE_RANGE         0x80FF8000U  /*!< VALUE OF ARGUMENT            */
  338. #define MMC_DUAL_VOLTAGE_RANGE         0x80FF8080U  /*!< VALUE OF ARGUMENT            */
  339. #define eMMC_HIGH_VOLTAGE_RANGE        0xC0FF8000U  /*!< for eMMC > 2Gb sector mode   */
  340. #define eMMC_DUAL_VOLTAGE_RANGE        0xC0FF8080U  /*!< for eMMC > 2Gb sector mode   */
  341. #define MMC_INVALID_VOLTAGE_RANGE      0x0001FF01U
  342. /**
  343.   * @}
  344.   */
  345.  
  346. /** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards
  347.   * @{
  348.   */
  349. #define  MMC_LOW_CAPACITY_CARD     ((uint32_t)0x00000000U)   /*!< MMC Card Capacity <=2Gbytes   */
  350. #define  MMC_HIGH_CAPACITY_CARD    ((uint32_t)0x00000001U)   /*!< MMC Card Capacity >2Gbytes and <2Tbytes   */
  351.  
  352. /**
  353.   * @}
  354.   */
  355.      
  356. /**
  357.   * @}
  358.   */
  359.  
  360. /* Exported macro ------------------------------------------------------------*/
  361. /** @defgroup MMC_Exported_macros MMC Exported Macros
  362.  *  @brief macros to handle interrupts and specific clock configurations
  363.  * @{
  364.  */
  365. /** @brief Reset MMC handle state.
  366.   * @param  __HANDLE__ : MMC handle.
  367.   * @retval None
  368.   */
  369. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  370. #define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__)           do {                                              \
  371.                                                                (__HANDLE__)->State = HAL_MMC_STATE_RESET; \
  372.                                                                (__HANDLE__)->MspInitCallback = NULL;       \
  373.                                                                (__HANDLE__)->MspDeInitCallback = NULL;     \
  374.                                                              } while(0)
  375. #else
  376. #define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__)           ((__HANDLE__)->State = HAL_MMC_STATE_RESET)
  377. #endif
  378.  
  379. /**
  380.   * @brief  Enable the MMC device.
  381.   * @retval None
  382.   */
  383. #define __HAL_MMC_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
  384.  
  385. /**
  386.   * @brief  Disable the MMC device.
  387.   * @retval None
  388.   */
  389. #define __HAL_MMC_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
  390.  
  391. /**
  392.   * @brief  Enable the SDMMC DMA transfer.
  393.   * @retval None
  394.   */
  395. #define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
  396.  
  397. /**
  398.   * @brief  Disable the SDMMC DMA transfer.
  399.   * @retval None
  400.   */
  401. #define __HAL_MMC_DMA_DISABLE(__HANDLE__)  __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
  402.  
  403. /**
  404.   * @brief  Enable the MMC device interrupt.
  405.   * @param  __HANDLE__: MMC Handle  
  406.   * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
  407.   *         This parameter can be one or a combination of the following values:
  408.   *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
  409.   *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
  410.   *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
  411.   *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
  412.   *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
  413.   *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
  414.   *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
  415.   *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
  416.   *            @arg SDIO_IT_DATAEND:  Data end (data counter, DATACOUNT, is zero) interrupt
  417.   *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
  418.   *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
  419.   *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
  420.   *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
  421.   *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
  422.   *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
  423.   *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
  424.   *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
  425.   *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
  426.   *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
  427.   *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
  428.   *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
  429.   *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
  430.   * @retval None
  431.   */
  432. #define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
  433.  
  434. /**
  435.   * @brief  Disable the MMC device interrupt.
  436.   * @param  __HANDLE__: MMC Handle  
  437.   * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
  438.   *          This parameter can be one or a combination of the following values:
  439.   *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
  440.   *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
  441.   *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
  442.   *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
  443.   *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
  444.   *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
  445.   *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
  446.   *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
  447.   *            @arg SDIO_IT_DATAEND:  Data end (data counter, DATACOUNT, is zero) interrupt
  448.   *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
  449.   *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
  450.   *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
  451.   *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
  452.   *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
  453.   *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
  454.   *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
  455.   *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
  456.   *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
  457.   *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
  458.   *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
  459.   *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
  460.   *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt  
  461.   * @retval None
  462.   */
  463. #define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
  464.  
  465. /**
  466.   * @brief  Check whether the specified MMC flag is set or not.
  467.   * @param  __HANDLE__: MMC Handle  
  468.   * @param  __FLAG__: specifies the flag to check.
  469.   *          This parameter can be one of the following values:
  470.   *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
  471.   *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
  472.   *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
  473.   *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
  474.   *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
  475.   *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
  476.   *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
  477.   *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
  478.   *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, DATACOUNT, is zero)
  479.   *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
  480.   *            @arg SDIO_FLAG_CMDACT:   Command transfer in progress
  481.   *            @arg SDIO_FLAG_TXACT:    Data transmit in progress
  482.   *            @arg SDIO_FLAG_RXACT:    Data receive in progress
  483.   *            @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
  484.   *            @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
  485.   *            @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full
  486.   *            @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full
  487.   *            @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty
  488.   *            @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty
  489.   *            @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO
  490.   *            @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO
  491.   *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
  492.   * @retval The new state of MMC FLAG (SET or RESET).
  493.   */
  494. #define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
  495.  
  496. /**
  497.   * @brief  Clear the MMC's pending flags.
  498.   * @param  __HANDLE__: MMC Handle  
  499.   * @param  __FLAG__: specifies the flag to clear.  
  500.   *          This parameter can be one or a combination of the following values:
  501.   *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
  502.   *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
  503.   *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
  504.   *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
  505.   *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
  506.   *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
  507.   *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
  508.   *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
  509.   *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, DATACOUNT, is zero)
  510.   *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
  511.   *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
  512.   * @retval None
  513.   */
  514. #define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
  515.  
  516. /**
  517.   * @brief  Check whether the specified MMC interrupt has occurred or not.
  518.   * @param  __HANDLE__: MMC Handle  
  519.   * @param  __INTERRUPT__: specifies the SDMMC interrupt source to check.
  520.   *          This parameter can be one of the following values:
  521.   *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
  522.   *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
  523.   *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
  524.   *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
  525.   *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
  526.   *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
  527.   *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
  528.   *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
  529.   *            @arg SDIO_IT_DATAEND:  Data end (data counter, DATACOUNT, is zero) interrupt
  530.   *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
  531.   *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
  532.   *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
  533.   *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
  534.   *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
  535.   *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
  536.   *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
  537.   *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
  538.   *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
  539.   *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
  540.   *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
  541.   *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
  542.   *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
  543.   * @retval The new state of MMC IT (SET or RESET).
  544.   */
  545. #define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
  546.  
  547. /**
  548.   * @brief  Clear the MMC's interrupt pending bits.
  549.   * @param  __HANDLE__: MMC Handle
  550.   * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
  551.   *          This parameter can be one or a combination of the following values:
  552.   *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
  553.   *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
  554.   *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
  555.   *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
  556.   *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
  557.   *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
  558.   *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
  559.   *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
  560.   *            @arg SDIO_IT_DATAEND:  Data end (data counter, DATACOUNT, is zero) interrupt
  561.   *            @arg SDIO_IT_DBCKEND:    Data block sent/received (CRC check passed) interrupt
  562.   *            @arg SDIO_IT_TXFIFOHE:   Transmit FIFO Half Empty interrupt
  563.   *            @arg SDIO_IT_RXFIFOHF:   Receive FIFO Half Full interrupt
  564.   *            @arg SDIO_IT_RXFIFOF:    Receive FIFO full interrupt
  565.   *            @arg SDIO_IT_TXFIFOE:    Transmit FIFO empty interrupt
  566.   *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
  567.   * @retval None
  568.   */
  569. #define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
  570.  
  571. /**
  572.   * @}
  573.   */
  574.  
  575. /* Exported functions --------------------------------------------------------*/
  576. /** @defgroup MMC_Exported_Functions MMC Exported Functions
  577.   * @{
  578.   */
  579.  
  580. /** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions
  581.   * @{
  582.   */
  583. HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc);
  584. HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc);
  585. HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc);
  586. void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc);
  587. void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc);
  588.  
  589. /**
  590.   * @}
  591.   */
  592.  
  593. /** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions
  594.   * @{
  595.   */
  596. /* Blocking mode: Polling */
  597. HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
  598. HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
  599. HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
  600. /* Non-Blocking mode: IT */
  601. HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
  602. HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
  603. /* Non-Blocking mode: DMA */
  604. HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
  605. HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
  606.  
  607. void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc);
  608.  
  609. /* Callback in non blocking modes (DMA) */
  610. void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc);
  611. void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc);
  612. void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc);
  613. void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc);
  614.  
  615. #if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
  616. /* MMC callback registering/unregistering */
  617. HAL_StatusTypeDef HAL_MMC_RegisterCallback  (MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback);
  618. HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId);
  619. #endif
  620. /**
  621.   * @}
  622.   */
  623.  
  624. /** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions
  625.   * @{
  626.   */
  627. HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode);
  628. /**
  629.   * @}
  630.   */
  631.  
  632. /** @defgroup MMC_Exported_Functions_Group4 MMC card related functions
  633.   * @{
  634.   */
  635. HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc);
  636. HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID);
  637. HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD);
  638. HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo);
  639. /**
  640.   * @}
  641.   */
  642.  
  643. /** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions
  644.   * @{
  645.   */
  646. HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc);
  647. uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc);
  648. /**
  649.   * @}
  650.   */
  651.  
  652. /** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management
  653.   * @{
  654.   */
  655. HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc);
  656. HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc);
  657. /**
  658.   * @}
  659.   */
  660.    
  661. /* Private types -------------------------------------------------------------*/
  662. /** @defgroup MMC_Private_Types MMC Private Types
  663.   * @{
  664.   */
  665.  
  666. /**
  667.   * @}
  668.   */
  669.  
  670. /* Private defines -----------------------------------------------------------*/
  671. /** @defgroup MMC_Private_Defines MMC Private Defines
  672.   * @{
  673.   */
  674.  
  675. /**
  676.   * @}
  677.   */
  678.          
  679. /* Private variables ---------------------------------------------------------*/
  680. /** @defgroup MMC_Private_Variables MMC Private Variables
  681.   * @{
  682.   */
  683.  
  684. /**
  685.   * @}
  686.   */
  687.  
  688. /* Private constants ---------------------------------------------------------*/
  689. /** @defgroup MMC_Private_Constants MMC Private Constants
  690.   * @{
  691.   */
  692.  
  693. /**
  694.   * @}
  695.   */
  696.  
  697. /* Private macros ------------------------------------------------------------*/
  698. /** @defgroup MMC_Private_Macros MMC Private Macros
  699.   * @{
  700.   */
  701.  
  702. /**
  703.   * @}
  704.   */
  705.  
  706. /* Private functions prototypes ----------------------------------------------*/
  707. /** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes
  708.   * @{
  709.   */
  710.  
  711. /**
  712.   * @}
  713.   */
  714.  
  715. /* Private functions ---------------------------------------------------------*/
  716. /** @defgroup MMC_Private_Functions MMC Private Functions
  717.   * @{
  718.   */
  719.  
  720. /**
  721.   * @}
  722.   */
  723.  
  724.  
  725. /**
  726.   * @}
  727.   */
  728.  
  729. /**
  730.   * @}
  731.   */
  732.  
  733. /**
  734.   * @}
  735.   */
  736.  
  737. #ifdef __cplusplus
  738. }
  739. #endif
  740.  
  741. #endif /* SDIO */
  742.  
  743. #endif /* STM32F1xx_HAL_MMC_H */
  744.  
  745. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
  746.