Subversion Repositories FuelGauge

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /**
  2.   ******************************************************************************
  3.   * @file    stm32f0xx_hal_conf.h
  4.   * @author  MCD Application Team
  5.   * @brief   HAL configuration file.
  6.   ******************************************************************************
  7.   * @attention
  8.   *
  9.   * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  10.   * All rights reserved.</center></h2>
  11.   *
  12.   * This software component is licensed by ST under BSD 3-Clause license,
  13.   * the "License"; You may not use this file except in compliance with the
  14.   * License. You may obtain a copy of the License at:
  15.   *                        opensource.org/licenses/BSD-3-Clause
  16.   *
  17.   ******************************************************************************
  18.   */
  19.  
  20. /* Define to prevent recursive inclusion -------------------------------------*/
  21. #ifndef __STM32F0xx_HAL_CONF_H
  22. #define __STM32F0xx_HAL_CONF_H
  23.  
  24. #ifdef __cplusplus
  25.  extern "C" {
  26. #endif
  27.  
  28. /* Exported types ------------------------------------------------------------*/
  29. /* Exported constants --------------------------------------------------------*/
  30.  
  31. /* ########################## Module Selection ############################## */
  32. /**
  33.   * @brief This is the list of modules to be used in the HAL driver
  34.   */
  35. #define HAL_MODULE_ENABLED
  36. #define HAL_ADC_MODULE_ENABLED
  37. #define HAL_CAN_MODULE_ENABLED
  38. #define HAL_CEC_MODULE_ENABLED
  39. #define HAL_COMP_MODULE_ENABLED
  40. #define HAL_CORTEX_MODULE_ENABLED
  41. #define HAL_CRC_MODULE_ENABLED
  42. #define HAL_DAC_MODULE_ENABLED
  43. #define HAL_DMA_MODULE_ENABLED
  44. #define HAL_FLASH_MODULE_ENABLED
  45. #define HAL_GPIO_MODULE_ENABLED
  46. #define HAL_EXTI_MODULE_ENABLED
  47. #define HAL_I2C_MODULE_ENABLED
  48. #define HAL_I2S_MODULE_ENABLED
  49. #define HAL_IRDA_MODULE_ENABLED
  50. #define HAL_IWDG_MODULE_ENABLED
  51. #define HAL_PCD_MODULE_ENABLED
  52. #define HAL_PWR_MODULE_ENABLED
  53. #define HAL_RCC_MODULE_ENABLED
  54. #define HAL_RTC_MODULE_ENABLED
  55. #define HAL_SMARTCARD_MODULE_ENABLED
  56. #define HAL_SMBUS_MODULE_ENABLED
  57. #define HAL_SPI_MODULE_ENABLED
  58. #define HAL_TIM_MODULE_ENABLED
  59. #define HAL_TSC_MODULE_ENABLED
  60. #define HAL_UART_MODULE_ENABLED
  61. #define HAL_USART_MODULE_ENABLED
  62. #define HAL_WWDG_MODULE_ENABLED
  63.  
  64. /* ######################### Oscillator Values adaptation ################### */
  65. /**
  66.   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
  67.   *        This value is used by the RCC HAL module to compute the system frequency
  68.   *        (when HSE is used as system clock source, directly or through the PLL).  
  69.   */
  70. #if !defined  (HSE_VALUE)
  71.   #define HSE_VALUE            8000000U  /*!< Value of the External oscillator in Hz */
  72. #endif /* HSE_VALUE */
  73.  
  74. /**
  75.   * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
  76.   *        Timeout value
  77.   */
  78. #if !defined  (HSE_STARTUP_TIMEOUT)
  79.   #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */
  80. #endif /* HSE_STARTUP_TIMEOUT */
  81.  
  82. /**
  83.   * @brief Internal High Speed oscillator (HSI) value.
  84.   *        This value is used by the RCC HAL module to compute the system frequency
  85.   *        (when HSI is used as system clock source, directly or through the PLL).
  86.   */
  87. #if !defined  (HSI_VALUE)
  88.   #define HSI_VALUE            8000000U  /*!< Value of the Internal oscillator in Hz*/
  89. #endif /* HSI_VALUE */
  90.  
  91. /**
  92.   * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
  93.   *        Timeout value
  94.   */
  95. #if !defined  (HSI_STARTUP_TIMEOUT)
  96.   #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
  97. #endif /* HSI_STARTUP_TIMEOUT */  
  98.  
  99. /**
  100.   * @brief Internal High Speed oscillator for ADC (HSI14) value.
  101.   */
  102. #if !defined  (HSI14_VALUE)
  103.   #define HSI14_VALUE          14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
  104.                                              The real value may vary depending on the variations
  105.                                              in voltage and temperature.  */
  106. #endif /* HSI14_VALUE */
  107.  
  108. /**
  109.   * @brief Internal High Speed oscillator for USB (HSI48) value.
  110.   */
  111. #if !defined  (HSI48_VALUE)
  112.   #define HSI48_VALUE          48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
  113.                                              The real value may vary depending on the variations
  114.                                              in voltage and temperature.  */
  115. #endif /* HSI48_VALUE */
  116.  
  117. /**
  118.   * @brief Internal Low Speed oscillator (LSI) value.
  119.   */
  120. #if !defined  (LSI_VALUE)
  121.   #define LSI_VALUE            32000U    
  122. #endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz
  123.                                              The real value may vary depending on the variations
  124.                                              in voltage and temperature.  */
  125. /**
  126.   * @brief External Low Speed oscillator (LSE) value.
  127.   */
  128. #if !defined  (LSE_VALUE)
  129.   #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */
  130. #endif /* LSE_VALUE */
  131.  
  132. /**
  133.   * @brief Time out for LSE start up value in ms.
  134.   */
  135. #if !defined  (LSE_STARTUP_TIMEOUT)
  136.   #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */
  137. #endif /* LSE_STARTUP_TIMEOUT */
  138.  
  139.  
  140. /* Tip: To avoid modifying this file each time you need to use different HSE,
  141.    ===  you can define the HSE value in your toolchain compiler preprocessor. */
  142.  
  143. /* ########################### System Configuration ######################### */
  144. /**
  145.   * @brief This is the HAL system configuration section
  146.   */    
  147. #define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */          
  148. #define  TICK_INT_PRIORITY            ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default)             */
  149.                                                                               /*  Warning: Must be set to higher priority for HAL_Delay()  */
  150.                                                                               /*  and HAL_GetTick() usage under interrupt context          */
  151. #define  USE_RTOS                     0U
  152. #define  PREFETCH_ENABLE              1U
  153. #define  INSTRUCTION_CACHE_ENABLE     0U
  154. #define  DATA_CACHE_ENABLE            0U
  155. #define  USE_SPI_CRC                  1U
  156.  
  157. #define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
  158. #define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
  159. #define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
  160. #define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
  161. #define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
  162. #define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
  163. #define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
  164. #define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
  165. #define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
  166. #define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
  167. #define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
  168. #define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
  169. #define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
  170. #define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
  171. #define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
  172. #define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
  173. #define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
  174. #define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
  175.  
  176. /* ########################## Assert Selection ############################## */
  177. /**
  178.   * @brief Uncomment the line below to expanse the "assert_param" macro in the
  179.   *        HAL drivers code
  180.   */
  181. /*#define USE_FULL_ASSERT    1*/
  182.  
  183. /* Includes ------------------------------------------------------------------*/
  184. /**
  185.   * @brief Include module's header file
  186.   */
  187.  
  188. #ifdef HAL_RCC_MODULE_ENABLED
  189.  #include "stm32f0xx_hal_rcc.h"
  190. #endif /* HAL_RCC_MODULE_ENABLED */
  191.  
  192. #ifdef HAL_GPIO_MODULE_ENABLED
  193.  #include "stm32f0xx_hal_gpio.h"
  194. #endif /* HAL_GPIO_MODULE_ENABLED */
  195.  
  196. #ifdef HAL_EXTI_MODULE_ENABLED
  197.   #include "stm32f0xx_hal_exti.h"
  198. #endif /* HAL_EXTI_MODULE_ENABLED */
  199.  
  200. #ifdef HAL_DMA_MODULE_ENABLED
  201.   #include "stm32f0xx_hal_dma.h"
  202. #endif /* HAL_DMA_MODULE_ENABLED */
  203.  
  204. #ifdef HAL_CORTEX_MODULE_ENABLED
  205.  #include "stm32f0xx_hal_cortex.h"
  206. #endif /* HAL_CORTEX_MODULE_ENABLED */
  207.  
  208. #ifdef HAL_ADC_MODULE_ENABLED
  209.  #include "stm32f0xx_hal_adc.h"
  210. #endif /* HAL_ADC_MODULE_ENABLED */
  211.  
  212. #ifdef HAL_CAN_MODULE_ENABLED
  213.  #include "stm32f0xx_hal_can.h"
  214. #endif /* HAL_CAN_MODULE_ENABLED */
  215.  
  216. #ifdef HAL_CEC_MODULE_ENABLED
  217.  #include "stm32f0xx_hal_cec.h"
  218. #endif /* HAL_CEC_MODULE_ENABLED */
  219.  
  220. #ifdef HAL_COMP_MODULE_ENABLED
  221.  #include "stm32f0xx_hal_comp.h"
  222. #endif /* HAL_COMP_MODULE_ENABLED */
  223.  
  224. #ifdef HAL_CRC_MODULE_ENABLED
  225.  #include "stm32f0xx_hal_crc.h"
  226. #endif /* HAL_CRC_MODULE_ENABLED */
  227.  
  228. #ifdef HAL_DAC_MODULE_ENABLED
  229.  #include "stm32f0xx_hal_dac.h"
  230. #endif /* HAL_DAC_MODULE_ENABLED */
  231.  
  232. #ifdef HAL_FLASH_MODULE_ENABLED
  233.  #include "stm32f0xx_hal_flash.h"
  234. #endif /* HAL_FLASH_MODULE_ENABLED */
  235.  
  236. #ifdef HAL_I2C_MODULE_ENABLED
  237.  #include "stm32f0xx_hal_i2c.h"
  238. #endif /* HAL_I2C_MODULE_ENABLED */
  239.  
  240. #ifdef HAL_I2S_MODULE_ENABLED
  241.  #include "stm32f0xx_hal_i2s.h"
  242. #endif /* HAL_I2S_MODULE_ENABLED */
  243.  
  244. #ifdef HAL_IRDA_MODULE_ENABLED
  245.  #include "stm32f0xx_hal_irda.h"
  246. #endif /* HAL_IRDA_MODULE_ENABLED */
  247.  
  248. #ifdef HAL_IWDG_MODULE_ENABLED
  249.  #include "stm32f0xx_hal_iwdg.h"
  250. #endif /* HAL_IWDG_MODULE_ENABLED */
  251.  
  252. #ifdef HAL_PCD_MODULE_ENABLED
  253.  #include "stm32f0xx_hal_pcd.h"
  254. #endif /* HAL_PCD_MODULE_ENABLED */
  255.  
  256. #ifdef HAL_PWR_MODULE_ENABLED
  257.  #include "stm32f0xx_hal_pwr.h"
  258. #endif /* HAL_PWR_MODULE_ENABLED */
  259.  
  260. #ifdef HAL_RTC_MODULE_ENABLED
  261.  #include "stm32f0xx_hal_rtc.h"
  262. #endif /* HAL_RTC_MODULE_ENABLED */
  263.  
  264. #ifdef HAL_SMARTCARD_MODULE_ENABLED
  265.  #include "stm32f0xx_hal_smartcard.h"
  266. #endif /* HAL_SMARTCARD_MODULE_ENABLED */
  267.  
  268. #ifdef HAL_SMBUS_MODULE_ENABLED
  269.  #include "stm32f0xx_hal_smbus.h"
  270. #endif /* HAL_SMBUS_MODULE_ENABLED */
  271.  
  272. #ifdef HAL_SPI_MODULE_ENABLED
  273.  #include "stm32f0xx_hal_spi.h"
  274. #endif /* HAL_SPI_MODULE_ENABLED */
  275.  
  276. #ifdef HAL_TIM_MODULE_ENABLED
  277.  #include "stm32f0xx_hal_tim.h"
  278. #endif /* HAL_TIM_MODULE_ENABLED */
  279.  
  280. #ifdef HAL_TSC_MODULE_ENABLED
  281.  #include "stm32f0xx_hal_tsc.h"
  282. #endif /* HAL_TSC_MODULE_ENABLED */
  283.  
  284. #ifdef HAL_UART_MODULE_ENABLED
  285.  #include "stm32f0xx_hal_uart.h"
  286. #endif /* HAL_UART_MODULE_ENABLED */
  287.  
  288. #ifdef HAL_USART_MODULE_ENABLED
  289.  #include "stm32f0xx_hal_usart.h"
  290. #endif /* HAL_USART_MODULE_ENABLED */
  291.  
  292. #ifdef HAL_WWDG_MODULE_ENABLED
  293.  #include "stm32f0xx_hal_wwdg.h"
  294. #endif /* HAL_WWDG_MODULE_ENABLED */
  295.  
  296. /* Exported macro ------------------------------------------------------------*/
  297. #ifdef  USE_FULL_ASSERT
  298. /**
  299.   * @brief  The assert_param macro is used for function's parameters check.
  300.   * @param  expr If expr is false, it calls assert_failed function
  301.   *         which reports the name of the source file and the source
  302.   *         line number of the call that failed.
  303.   *         If expr is true, it returns no value.
  304.   * @retval None
  305.   */
  306.   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
  307. /* Exported functions ------------------------------------------------------- */
  308.   void assert_failed(uint8_t* file, uint32_t line);
  309. #else
  310.   #define assert_param(expr) ((void)0U)
  311. #endif /* USE_FULL_ASSERT */    
  312.    
  313. #ifdef __cplusplus
  314. }
  315. #endif
  316.  
  317. #endif /* __STM32F0xx_HAL_CONF_H */
  318.  
  319.  
  320. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
  321.  
  322.