Subversion Repositories ScreenTimer

Rev

Blame | Last modification | View Log | Download | RSS feed

  1. /**
  2.   ******************************************************************************
  3.   * @file    stm32f0xx_hal_conf.h
  4.   * @author  MCD Application Team
  5.   * @brief   HAL configuration file.
  6.   ******************************************************************************
  7.   * @attention
  8.   *
  9.   * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  10.   * All rights reserved.</center></h2>
  11.   *
  12.   * This software component is licensed by ST under BSD 3-Clause license,
  13.   * the "License"; You may not use this file except in compliance with the
  14.   * License. You may obtain a copy of the License at:
  15.   *                        opensource.org/licenses/BSD-3-Clause
  16.   *
  17.   ******************************************************************************
  18.   */
  19.  
  20. /* Define to prevent recursive inclusion -------------------------------------*/
  21. #ifndef __STM32F0xx_HAL_CONF_H
  22. #define __STM32F0xx_HAL_CONF_H
  23.  
  24. #ifdef __cplusplus
  25.  extern "C" {
  26. #endif
  27.  
  28. /* Exported types ------------------------------------------------------------*/
  29. /* Exported constants --------------------------------------------------------*/
  30.  
  31. /* ########################## Module Selection ############################## */
  32. /**
  33.   * @brief This is the list of modules to be used in the HAL driver
  34.   */
  35. #define HAL_MODULE_ENABLED
  36. #define HAL_ADC_MODULE_ENABLED
  37. /* #define HAL_CAN_LEGACY_MODULE_ENABLED */
  38. #define HAL_CAN_MODULE_ENABLED
  39. #define HAL_CEC_MODULE_ENABLED
  40. #define HAL_COMP_MODULE_ENABLED
  41. #define HAL_CORTEX_MODULE_ENABLED
  42. #define HAL_CRC_MODULE_ENABLED
  43. #define HAL_DAC_MODULE_ENABLED
  44. #define HAL_DMA_MODULE_ENABLED
  45. #define HAL_FLASH_MODULE_ENABLED
  46. #define HAL_GPIO_MODULE_ENABLED
  47. #define HAL_EXTI_MODULE_ENABLED
  48. #define HAL_I2C_MODULE_ENABLED
  49. #define HAL_I2S_MODULE_ENABLED
  50. #define HAL_IRDA_MODULE_ENABLED
  51. #define HAL_IWDG_MODULE_ENABLED
  52. #define HAL_PCD_MODULE_ENABLED
  53. #define HAL_PWR_MODULE_ENABLED
  54. #define HAL_RCC_MODULE_ENABLED
  55. #define HAL_RTC_MODULE_ENABLED
  56. #define HAL_SMARTCARD_MODULE_ENABLED
  57. #define HAL_SMBUS_MODULE_ENABLED
  58. #define HAL_SPI_MODULE_ENABLED
  59. #define HAL_TIM_MODULE_ENABLED
  60. #define HAL_TSC_MODULE_ENABLED
  61. #define HAL_UART_MODULE_ENABLED
  62. #define HAL_USART_MODULE_ENABLED
  63. #define HAL_WWDG_MODULE_ENABLED
  64.  
  65. /* ######################### Oscillator Values adaptation ################### */
  66. /**
  67.   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
  68.   *        This value is used by the RCC HAL module to compute the system frequency
  69.   *        (when HSE is used as system clock source, directly or through the PLL).  
  70.   */
  71. #if !defined  (HSE_VALUE)
  72.   #define HSE_VALUE            8000000U  /*!< Value of the External oscillator in Hz */
  73. #endif /* HSE_VALUE */
  74.  
  75. /**
  76.   * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
  77.   *        Timeout value
  78.   */
  79. #if !defined  (HSE_STARTUP_TIMEOUT)
  80.   #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */
  81. #endif /* HSE_STARTUP_TIMEOUT */
  82.  
  83. /**
  84.   * @brief Internal High Speed oscillator (HSI) value.
  85.   *        This value is used by the RCC HAL module to compute the system frequency
  86.   *        (when HSI is used as system clock source, directly or through the PLL).
  87.   */
  88. #if !defined  (HSI_VALUE)
  89.   #define HSI_VALUE            8000000U  /*!< Value of the Internal oscillator in Hz*/
  90. #endif /* HSI_VALUE */
  91.  
  92. /**
  93.   * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
  94.   *        Timeout value
  95.   */
  96. #if !defined  (HSI_STARTUP_TIMEOUT)
  97.   #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
  98. #endif /* HSI_STARTUP_TIMEOUT */  
  99.  
  100. /**
  101.   * @brief Internal High Speed oscillator for ADC (HSI14) value.
  102.   */
  103. #if !defined  (HSI14_VALUE)
  104.   #define HSI14_VALUE          14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
  105.                                              The real value may vary depending on the variations
  106.                                              in voltage and temperature.  */
  107. #endif /* HSI14_VALUE */
  108.  
  109. /**
  110.   * @brief Internal High Speed oscillator for USB (HSI48) value.
  111.   */
  112. #if !defined  (HSI48_VALUE)
  113.   #define HSI48_VALUE          48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
  114.                                              The real value may vary depending on the variations
  115.                                              in voltage and temperature.  */
  116. #endif /* HSI48_VALUE */
  117.  
  118. /**
  119.   * @brief Internal Low Speed oscillator (LSI) value.
  120.   */
  121. #if !defined  (LSI_VALUE)
  122.   #define LSI_VALUE            32000U    
  123. #endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz
  124.                                              The real value may vary depending on the variations
  125.                                              in voltage and temperature.  */
  126. /**
  127.   * @brief External Low Speed oscillator (LSE) value.
  128.   */
  129. #if !defined  (LSE_VALUE)
  130.   #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */
  131. #endif /* LSE_VALUE */
  132.  
  133. /**
  134.   * @brief Time out for LSE start up value in ms.
  135.   */
  136. #if !defined  (LSE_STARTUP_TIMEOUT)
  137.   #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */
  138. #endif /* LSE_STARTUP_TIMEOUT */
  139.  
  140.  
  141. /* Tip: To avoid modifying this file each time you need to use different HSE,
  142.    ===  you can define the HSE value in your toolchain compiler preprocessor. */
  143.  
  144. /* ########################### System Configuration ######################### */
  145. /**
  146.   * @brief This is the HAL system configuration section
  147.   */    
  148. #define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */          
  149. #define  TICK_INT_PRIORITY            ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default)             */
  150.                                                                               /*  Warning: Must be set to higher priority for HAL_Delay()  */
  151.                                                                               /*  and HAL_GetTick() usage under interrupt context          */
  152. #define  USE_RTOS                     0U
  153. #define  PREFETCH_ENABLE              1U
  154. #define  INSTRUCTION_CACHE_ENABLE     0U
  155. #define  DATA_CACHE_ENABLE            0U
  156. #define  USE_SPI_CRC                  1U
  157.  
  158. #define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
  159. #define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
  160. #define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
  161. #define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
  162. #define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
  163. #define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
  164. #define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
  165. #define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
  166. #define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
  167. #define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
  168. #define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
  169. #define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
  170. #define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
  171. #define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
  172. #define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
  173. #define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
  174. #define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
  175. #define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
  176.  
  177. /* ########################## Assert Selection ############################## */
  178. /**
  179.   * @brief Uncomment the line below to expanse the "assert_param" macro in the
  180.   *        HAL drivers code
  181.   */
  182. /*#define USE_FULL_ASSERT    1*/
  183.  
  184. /* Includes ------------------------------------------------------------------*/
  185. /**
  186.   * @brief Include module's header file
  187.   */
  188.  
  189. #ifdef HAL_RCC_MODULE_ENABLED
  190.  #include "stm32f0xx_hal_rcc.h"
  191. #endif /* HAL_RCC_MODULE_ENABLED */
  192.  
  193. #ifdef HAL_GPIO_MODULE_ENABLED
  194.  #include "stm32f0xx_hal_gpio.h"
  195. #endif /* HAL_GPIO_MODULE_ENABLED */
  196.  
  197. #ifdef HAL_EXTI_MODULE_ENABLED
  198.   #include "stm32f0xx_hal_exti.h"
  199. #endif /* HAL_EXTI_MODULE_ENABLED */
  200.  
  201. #ifdef HAL_DMA_MODULE_ENABLED
  202.   #include "stm32f0xx_hal_dma.h"
  203. #endif /* HAL_DMA_MODULE_ENABLED */
  204.  
  205. #ifdef HAL_CORTEX_MODULE_ENABLED
  206.  #include "stm32f0xx_hal_cortex.h"
  207. #endif /* HAL_CORTEX_MODULE_ENABLED */
  208.  
  209. #ifdef HAL_ADC_MODULE_ENABLED
  210.  #include "stm32f0xx_hal_adc.h"
  211. #endif /* HAL_ADC_MODULE_ENABLED */
  212.  
  213. #ifdef HAL_CAN_MODULE_ENABLED
  214.  #include "stm32f0xx_hal_can.h"
  215. #endif /* HAL_CAN_MODULE_ENABLED */
  216.  
  217. #ifdef HAL_CAN_LEGACY_MODULE_ENABLED
  218.   #include "stm32f0xx_hal_can_legacy.h"
  219. #endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
  220.  
  221. #ifdef HAL_CEC_MODULE_ENABLED
  222.  #include "stm32f0xx_hal_cec.h"
  223. #endif /* HAL_CEC_MODULE_ENABLED */
  224.  
  225. #ifdef HAL_COMP_MODULE_ENABLED
  226.  #include "stm32f0xx_hal_comp.h"
  227. #endif /* HAL_COMP_MODULE_ENABLED */
  228.  
  229. #ifdef HAL_CRC_MODULE_ENABLED
  230.  #include "stm32f0xx_hal_crc.h"
  231. #endif /* HAL_CRC_MODULE_ENABLED */
  232.  
  233. #ifdef HAL_DAC_MODULE_ENABLED
  234.  #include "stm32f0xx_hal_dac.h"
  235. #endif /* HAL_DAC_MODULE_ENABLED */
  236.  
  237. #ifdef HAL_FLASH_MODULE_ENABLED
  238.  #include "stm32f0xx_hal_flash.h"
  239. #endif /* HAL_FLASH_MODULE_ENABLED */
  240.  
  241. #ifdef HAL_I2C_MODULE_ENABLED
  242.  #include "stm32f0xx_hal_i2c.h"
  243. #endif /* HAL_I2C_MODULE_ENABLED */
  244.  
  245. #ifdef HAL_I2S_MODULE_ENABLED
  246.  #include "stm32f0xx_hal_i2s.h"
  247. #endif /* HAL_I2S_MODULE_ENABLED */
  248.  
  249. #ifdef HAL_IRDA_MODULE_ENABLED
  250.  #include "stm32f0xx_hal_irda.h"
  251. #endif /* HAL_IRDA_MODULE_ENABLED */
  252.  
  253. #ifdef HAL_IWDG_MODULE_ENABLED
  254.  #include "stm32f0xx_hal_iwdg.h"
  255. #endif /* HAL_IWDG_MODULE_ENABLED */
  256.  
  257. #ifdef HAL_PCD_MODULE_ENABLED
  258.  #include "stm32f0xx_hal_pcd.h"
  259. #endif /* HAL_PCD_MODULE_ENABLED */
  260.  
  261. #ifdef HAL_PWR_MODULE_ENABLED
  262.  #include "stm32f0xx_hal_pwr.h"
  263. #endif /* HAL_PWR_MODULE_ENABLED */
  264.  
  265. #ifdef HAL_RTC_MODULE_ENABLED
  266.  #include "stm32f0xx_hal_rtc.h"
  267. #endif /* HAL_RTC_MODULE_ENABLED */
  268.  
  269. #ifdef HAL_SMARTCARD_MODULE_ENABLED
  270.  #include "stm32f0xx_hal_smartcard.h"
  271. #endif /* HAL_SMARTCARD_MODULE_ENABLED */
  272.  
  273. #ifdef HAL_SMBUS_MODULE_ENABLED
  274.  #include "stm32f0xx_hal_smbus.h"
  275. #endif /* HAL_SMBUS_MODULE_ENABLED */
  276.  
  277. #ifdef HAL_SPI_MODULE_ENABLED
  278.  #include "stm32f0xx_hal_spi.h"
  279. #endif /* HAL_SPI_MODULE_ENABLED */
  280.  
  281. #ifdef HAL_TIM_MODULE_ENABLED
  282.  #include "stm32f0xx_hal_tim.h"
  283. #endif /* HAL_TIM_MODULE_ENABLED */
  284.  
  285. #ifdef HAL_TSC_MODULE_ENABLED
  286.  #include "stm32f0xx_hal_tsc.h"
  287. #endif /* HAL_TSC_MODULE_ENABLED */
  288.  
  289. #ifdef HAL_UART_MODULE_ENABLED
  290.  #include "stm32f0xx_hal_uart.h"
  291. #endif /* HAL_UART_MODULE_ENABLED */
  292.  
  293. #ifdef HAL_USART_MODULE_ENABLED
  294.  #include "stm32f0xx_hal_usart.h"
  295. #endif /* HAL_USART_MODULE_ENABLED */
  296.  
  297. #ifdef HAL_WWDG_MODULE_ENABLED
  298.  #include "stm32f0xx_hal_wwdg.h"
  299. #endif /* HAL_WWDG_MODULE_ENABLED */
  300.  
  301. /* Exported macro ------------------------------------------------------------*/
  302. #ifdef  USE_FULL_ASSERT
  303. /**
  304.   * @brief  The assert_param macro is used for function's parameters check.
  305.   * @param  expr If expr is false, it calls assert_failed function
  306.   *         which reports the name of the source file and the source
  307.   *         line number of the call that failed.
  308.   *         If expr is true, it returns no value.
  309.   * @retval None
  310.   */
  311.   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
  312. /* Exported functions ------------------------------------------------------- */
  313.   void assert_failed(uint8_t* file, uint32_t line);
  314. #else
  315.   #define assert_param(expr) ((void)0U)
  316. #endif /* USE_FULL_ASSERT */    
  317.    
  318. #ifdef __cplusplus
  319. }
  320. #endif
  321.  
  322. #endif /* __STM32F0xx_HAL_CONF_H */
  323.  
  324.  
  325. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
  326.  
  327.