Subversion Repositories DashDisplay

Rev

Rev 28 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /* ----------------------------------------------------------------------    
  2. * Copyright (C) 2010-2014 ARM Limited. All rights reserved.    
  3. *    
  4. * $Date:        19. March 2015
  5. * $Revision:    V.1.4.5
  6. *    
  7. * Project:          CMSIS DSP Library    
  8. * Title:            arm_pid_init_q15.c    
  9. *    
  10. * Description:  Q15 PID Control initialization function    
  11. *    
  12. * Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
  13. *  
  14. * Redistribution and use in source and binary forms, with or without
  15. * modification, are permitted provided that the following conditions
  16. * are met:
  17. *   - Redistributions of source code must retain the above copyright
  18. *     notice, this list of conditions and the following disclaimer.
  19. *   - Redistributions in binary form must reproduce the above copyright
  20. *     notice, this list of conditions and the following disclaimer in
  21. *     the documentation and/or other materials provided with the
  22. *     distribution.
  23. *   - Neither the name of ARM LIMITED nor the names of its contributors
  24. *     may be used to endorse or promote products derived from this
  25. *     software without specific prior written permission.
  26. *
  27. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  28. * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  29. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  30. * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
  31. * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  32. * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  33. * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  34. * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  35. * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  36. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
  37. * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  38. * POSSIBILITY OF SUCH DAMAGE.  
  39. * -------------------------------------------------------------------- */
  40.  
  41. #include "arm_math.h"
  42.  
  43.  /**    
  44.  * @addtogroup PID    
  45.  * @{    
  46.  */
  47.  
  48. /**    
  49.  * @details    
  50.  * @param[in,out] *S points to an instance of the Q15 PID structure.    
  51.  * @param[in]     resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.    
  52.  * @return none.    
  53.  * \par Description:  
  54.  * \par    
  55.  * The <code>resetStateFlag</code> specifies whether to set state to zero or not. \n  
  56.  * The function computes the structure fields: <code>A0</code>, <code>A1</code> <code>A2</code>    
  57.  * using the proportional gain( \c Kp), integral gain( \c Ki) and derivative gain( \c Kd)    
  58.  * also sets the state variables to all zeros.    
  59.  */
  60.  
  61. void arm_pid_init_q15(
  62.   arm_pid_instance_q15 * S,
  63.   int32_t resetStateFlag)
  64. {
  65.  
  66. #ifndef ARM_MATH_CM0_FAMILY
  67.  
  68.   /* Run the below code for Cortex-M4 and Cortex-M3 */
  69.  
  70.   /* Derived coefficient A0 */
  71.   S->A0 = __QADD16(__QADD16(S->Kp, S->Ki), S->Kd);
  72.  
  73.   /* Derived coefficients and pack into A1 */
  74.  
  75. #ifndef  ARM_MATH_BIG_ENDIAN
  76.  
  77.   S->A1 = __PKHBT(-__QADD16(__QADD16(S->Kd, S->Kd), S->Kp), S->Kd, 16);
  78.  
  79. #else
  80.  
  81.   S->A1 = __PKHBT(S->Kd, -__QADD16(__QADD16(S->Kd, S->Kd), S->Kp), 16);
  82.  
  83. #endif /*      #ifndef  ARM_MATH_BIG_ENDIAN    */
  84.  
  85.   /* Check whether state needs reset or not */
  86.   if(resetStateFlag)
  87.   {
  88.     /* Clear the state buffer.  The size will be always 3 samples */
  89.     memset(S->state, 0, 3u * sizeof(q15_t));
  90.   }
  91.  
  92. #else
  93.  
  94.   /* Run the below code for Cortex-M0 */
  95.  
  96.   q31_t temp;                                    /*to store the sum */
  97.  
  98.   /* Derived coefficient A0 */
  99.   temp = S->Kp + S->Ki + S->Kd;
  100.   S->A0 = (q15_t) __SSAT(temp, 16);
  101.  
  102.   /* Derived coefficients and pack into A1 */
  103.   temp = -(S->Kd + S->Kd + S->Kp);
  104.   S->A1 = (q15_t) __SSAT(temp, 16);
  105.   S->A2 = S->Kd;
  106.  
  107.  
  108.  
  109.   /* Check whether state needs reset or not */
  110.   if(resetStateFlag)
  111.   {
  112.     /* Clear the state buffer.  The size will be always 3 samples */
  113.     memset(S->state, 0, 3u * sizeof(q15_t));
  114.   }
  115.  
  116. #endif /* #ifndef ARM_MATH_CM0_FAMILY */
  117.  
  118. }
  119.  
  120. /**    
  121.  * @} end of PID group    
  122.  */
  123.