/**
******************************************************************************
* @file stm32l1xx_ll_system.h
* @author MCD Application Team
* @brief Header file of SYSTEM LL module.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL SYSTEM driver contains a set of generic APIs that can be
used by user:
(+) Some of the FLASH features need to be handled in the SYSTEM file.
(+) Access to DBGCMU registers
(+) Access to SYSCFG registers
(+) Access to Routing Interfaces registers
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L1xx_LL_SYSTEM_H
#define __STM32L1xx_LL_SYSTEM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l1xx.h"
/** @addtogroup STM32L1xx_LL_Driver
* @{
*/
#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined(RI)
/** @defgroup SYSTEM_LL SYSTEM
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
* @{
*/
/**
* @brief Power-down in Run mode Flash key
*/
#define FLASH_PDKEY1 (0x04152637U) /*!< Flash power down key1 */
#define FLASH_PDKEY2 (0xFAFBFCFDU) /*!< Flash power down key2: used with FLASH_PDKEY1
to unlock the RUN_PD bit in FLASH_ACR */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
* @{
*/
/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
* @{
*/
#define LL_SYSCFG_REMAP_FLASH (0x00000000U) /*<! Main Flash memory mapped at 0x00000000 */
#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*<! System Flash memory mapped at 0x00000000 */
#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*<! Embedded SRAM mapped at 0x00000000 */
#if defined(FSMC_R_BASE)
#define LL_SYSCFG_REMAP_FMC SYSCFG_MEMRMP_MEM_MODE_1 /*<! FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 */
#endif /* FSMC_R_BASE */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_BOOT SYSCFG BOOT MODE
* @{
*/
#define LL_SYSCFG_BOOTMODE_FLASH (0x00000000U) /*<! Main Flash memory boot mode */
#define LL_SYSCFG_BOOTMODE_SYSTEMFLASH SYSCFG_MEMRMP_BOOT_MODE_0 /*<! System Flash memory boot mode */
#if defined(FSMC_BANK1)
#define LL_SYSCFG_BOOTMODE_FSMC SYSCFG_MEMRMP_BOOT_MODE_1 /*<! FSMC boot mode */
#endif /* FSMC_BANK1 */
#define LL_SYSCFG_BOOTMODE_SRAM SYSCFG_MEMRMP_BOOT_MODE /*<! Embedded SRAM boot mode */
/**
* @}
*/
#if defined(LCD)
/** @defgroup SYSTEM_LL_EC_LCDCAPA SYSCFG LCD capacitance connection
* @{
*/
#define LL_SYSCFG_LCDCAPA_PB2 SYSCFG_PMC_LCD_CAPA_0 /*<! controls the connection of VLCDrail2 on PB2/LCD_VCAP2 */
#define LL_SYSCFG_LCDCAPA_PB12 SYSCFG_PMC_LCD_CAPA_1 /*<! controls the connection of VLCDrail1 on PB12/LCD_VCAP1 */
#define LL_SYSCFG_LCDCAPA_PB0 SYSCFG_PMC_LCD_CAPA_2 /*<! controls the connection of VLCDrail3 on PB0/LCD_VCAP3 */
#define LL_SYSCFG_LCDCAPA_PE11 SYSCFG_PMC_LCD_CAPA_3 /*<! controls the connection of VLCDrail1 on PE11/LCD_VCAP1 */
#define LL_SYSCFG_LCDCAPA_PE12 SYSCFG_PMC_LCD_CAPA_4 /*<! controls the connection of VLCDrail3 on PE12/LCD_VCAP3 */
/**
* @}
*/
#endif /* LCD */
/** @defgroup SYSTEM_LL_EC_EXTI SYSCFG EXTI PORT
* @{
*/
#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */
#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */
#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */
#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */
#if defined(GPIOE)
#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */
#endif /* GPIOE */
#if defined(GPIOF)
#define LL_SYSCFG_EXTI_PORTF 6U /*!< EXTI PORT F */
#endif /* GPIOF */
#if defined(GPIOG)
#define LL_SYSCFG_EXTI_PORTG 7U /*!< EXTI PORT G */
#endif /* GPIOG */
#define LL_SYSCFG_EXTI_PORTH 5U /*!< EXTI PORT H */
/**
* @}
*/
/** @addtogroup SYSTEM_LL_EC_SYSCFG EXTI LINE
* @{
*/
#define LL_SYSCFG_EXTI_LINE0 (uint32_t)(0x000FU << 16U | 0U) /* EXTI_POSITION_0 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE1 (uint32_t)(0x00F0U << 16U | 0U) /* EXTI_POSITION_4 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE2 (uint32_t)(0x0F00U << 16U | 0U) /* EXTI_POSITION_8 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE3 (uint32_t)(0xF000U << 16U | 0U) /* EXTI_POSITION_12 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE4 (uint32_t)(0x000FU << 16U | 1U) /* EXTI_POSITION_0 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE5 (uint32_t)(0x00F0U << 16U | 1U) /* EXTI_POSITION_4 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE6 (uint32_t)(0x0F00U << 16U | 1U) /* EXTI_POSITION_8 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE7 (uint32_t)(0xF000U << 16U | 1U) /* EXTI_POSITION_12 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE8 (uint32_t)(0x000FU << 16U | 2U) /* EXTI_POSITION_0 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE9 (uint32_t)(0x00F0U << 16U | 2U) /* EXTI_POSITION_4 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE10 (uint32_t)(0x0F00U << 16U | 2U) /* EXTI_POSITION_8 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE11 (uint32_t)(0xF000U << 16U | 2U) /* EXTI_POSITION_12 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE12 (uint32_t)(0x000FU << 16U | 3U) /* EXTI_POSITION_0 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE13 (uint32_t)(0x00F0U << 16U | 3U) /* EXTI_POSITION_4 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE14 (uint32_t)(0x0F00U << 16U | 3U) /* EXTI_POSITION_8 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE15 (uint32_t)(0xF000U << 16U | 3U) /* EXTI_POSITION_12 | EXTICR[3] */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
* @{
*/
#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */
#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */
#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
* @{
*/
#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1_FZ_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */
#if defined (DBGMCU_APB1_FZ_DBG_TIM5_STOP)
#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1_FZ_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_TIM5_STOP */
#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */
#if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP)
#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC Counter stopped when Core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
* @{
*/
#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2_FZ_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_APB2_FZ_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_APB2_FZ_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_TIM_SELECT RI TIM selection
* @{
*/
#define LL_RI_TIM_SELECT_NONE (0x00000000U) /*!< No timer selected */
#define LL_RI_TIM_SELECT_TIM2 RI_ICR_TIM_0 /*!< Timer 2 selected */
#define LL_RI_TIM_SELECT_TIM3 RI_ICR_TIM_1 /*!< Timer 3 selected */
#define LL_RI_TIM_SELECT_TIM4 RI_ICR_TIM /*!< Timer 4 selected */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_INPUTCAPTURE RI Input Capture number
* @{
*/
#define LL_RI_INPUTCAPTURE_1 (RI_ICR_IC1 | RI_ICR_IC1OS) /*!< Input Capture 1 select output */
#define LL_RI_INPUTCAPTURE_2 (RI_ICR_IC2 | RI_ICR_IC2OS) /*!< Input Capture 2 select output */
#define LL_RI_INPUTCAPTURE_3 (RI_ICR_IC3 | RI_ICR_IC3OS) /*!< Input Capture 3 select output */
#define LL_RI_INPUTCAPTURE_4 (RI_ICR_IC4 | RI_ICR_IC4OS) /*!< Input Capture 4 select output */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_INPUTCAPTUREROUTING RI Input Capture Routing
* @{
*/
/* TIMx_IC1 TIMx_IC2 TIMx_IC3 TIMx_IC4 */
#define LL_RI_INPUTCAPTUREROUTING_0 (0x00000000U) /*!< PA0 PA1 PA2 PA3 */
#define LL_RI_INPUTCAPTUREROUTING_1 (0x00000001U) /*!< PA4 PA5 PA6 PA7 */
#define LL_RI_INPUTCAPTUREROUTING_2 (0x00000002U) /*!< PA8 PA9 PA10 PA11 */
#define LL_RI_INPUTCAPTUREROUTING_3 (0x00000003U) /*!< PA12 PA13 PA14 PA15 */
#define LL_RI_INPUTCAPTUREROUTING_4 (0x00000004U) /*!< PC0 PC1 PC2 PC3 */
#define LL_RI_INPUTCAPTUREROUTING_5 (0x00000005U) /*!< PC4 PC5 PC6 PC7 */
#define LL_RI_INPUTCAPTUREROUTING_6 (0x00000006U) /*!< PC8 PC9 PC10 PC11 */
#define LL_RI_INPUTCAPTUREROUTING_7 (0x00000007U) /*!< PC12 PC13 PC14 PC15 */
#define LL_RI_INPUTCAPTUREROUTING_8 (0x00000008U) /*!< PD0 PD1 PD2 PD3 */
#define LL_RI_INPUTCAPTUREROUTING_9 (0x00000009U) /*!< PD4 PD5 PD6 PD7 */
#define LL_RI_INPUTCAPTUREROUTING_10 (0x0000000AU) /*!< PD8 PD9 PD10 PD11 */
#define LL_RI_INPUTCAPTUREROUTING_11 (0x0000000BU) /*!< PD12 PD13 PD14 PD15 */
#if defined(GPIOE)
#define LL_RI_INPUTCAPTUREROUTING_12 (0x0000000CU) /*!< PE0 PE1 PE2 PE3 */
#define LL_RI_INPUTCAPTUREROUTING_13 (0x0000000DU) /*!< PE4 PE5 PE6 PE7 */
#define LL_RI_INPUTCAPTUREROUTING_14 (0x0000000EU) /*!< PE8 PE9 PE10 PE11 */
#define LL_RI_INPUTCAPTUREROUTING_15 (0x0000000FU) /*!< PE12 PE13 PE14 PE15 */
#endif /* GPIOE */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_IOSWITCH_LINKED_ADC RI IO Switch linked to ADC
* @{
*/
#define LL_RI_IOSWITCH_CH0 RI_ASCR1_CH_0 /*!< CH[3:0] GR1[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH1 RI_ASCR1_CH_1 /*!< CH[3:0] GR1[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH2 RI_ASCR1_CH_2 /*!< CH[3:0] GR1[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH3 RI_ASCR1_CH_3 /*!< CH[3:0] GR1[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH4 RI_ASCR1_CH_4 /*!< CH4: Analog switch control */
#define LL_RI_IOSWITCH_CH5 RI_ASCR1_CH_5 /*!< CH5: Comparator 1 analog switch*/
#define LL_RI_IOSWITCH_CH6 RI_ASCR1_CH_6 /*!< CH[7:6] GR2[2:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH7 RI_ASCR1_CH_7 /*!< CH[7:6] GR2[2:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH8 RI_ASCR1_CH_8 /*!< CH[9:8] GR3[2:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH9 RI_ASCR1_CH_9 /*!< CH[9:8] GR3[2:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH10 RI_ASCR1_CH_10 /*!< CH[13:10] GR8[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH11 RI_ASCR1_CH_11 /*!< CH[13:10] GR8[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH12 RI_ASCR1_CH_12 /*!< CH[13:10] GR8[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH13 RI_ASCR1_CH_13 /*!< CH[13:10] GR8[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH14 RI_ASCR1_CH_14 /*!< CH[15:14] GR9[2:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH15 RI_ASCR1_CH_15 /*!< CH[15:14] GR9[2:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH18 RI_ASCR1_CH_18 /*!< CH[21:18]/GR7[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH19 RI_ASCR1_CH_19 /*!< CH[21:18]/GR7[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH20 RI_ASCR1_CH_20 /*!< CH[21:18]/GR7[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH21 RI_ASCR1_CH_21 /*!< CH[21:18]/GR7[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH22 RI_ASCR1_CH_22 /*!< Analog I/O switch control of channels CH22 */
#define LL_RI_IOSWITCH_CH23 RI_ASCR1_CH_23 /*!< Analog I/O switch control of channels CH23 */
#define LL_RI_IOSWITCH_CH24 RI_ASCR1_CH_24 /*!< Analog I/O switch control of channels CH24 */
#define LL_RI_IOSWITCH_CH25 RI_ASCR1_CH_25 /*!< Analog I/O switch control of channels CH25 */
#define LL_RI_IOSWITCH_VCOMP RI_ASCR1_VCOMP /*!< VCOMP (ADC channel 26) is an internal switch
used to connect selected channel to COMP1 non inverting input */
#if defined(RI_ASCR1_CH_27)
#define LL_RI_IOSWITCH_CH27 RI_ASCR1_CH_27 /*!< CH[30:27]/GR11[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH28 RI_ASCR1_CH_28 /*!< CH[30:27]/GR11[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH29 RI_ASCR1_CH_29 /*!< CH[30:27]/GR11[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH30 RI_ASCR1_CH_30 /*!< CH[30:27]/GR11[4:1]: I/O Analog switch control */
#define LL_RI_IOSWITCH_CH31 RI_ASCR1_CH_31 /*!< CH31/GR11-5 I/O Analog switch control */
#endif /* RI_ASCR1_CH_27 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_IOSWITCH_NOT_LINKED_ADC RI IO Switch not linked to ADC
* @{
*/
#define LL_RI_IOSWITCH_GR10_1 RI_ASCR2_GR10_1 /*!< GR10-1 I/O analog switch control */
#define LL_RI_IOSWITCH_GR10_2 RI_ASCR2_GR10_2 /*!< GR10-2 I/O analog switch control */
#define LL_RI_IOSWITCH_GR10_3 RI_ASCR2_GR10_3 /*!< GR10-3 I/O analog switch control */
#define LL_RI_IOSWITCH_GR10_4 RI_ASCR2_GR10_4 /*!< GR10-4 I/O analog switch control */
#define LL_RI_IOSWITCH_GR6_1 RI_ASCR2_GR6_1 /*!< GR6-1 I/O analog switch control */
#define LL_RI_IOSWITCH_GR6_2 RI_ASCR2_GR6_2 /*!< GR6-2 I/O analog switch control */
#define LL_RI_IOSWITCH_GR5_1 RI_ASCR2_GR5_1 /*!< GR5-1 I/O analog switch control */
#define LL_RI_IOSWITCH_GR5_2 RI_ASCR2_GR5_2 /*!< GR5-2 I/O analog switch control */
#define LL_RI_IOSWITCH_GR5_3 RI_ASCR2_GR5_3 /*!< GR5-3 I/O analog switch control */
#define LL_RI_IOSWITCH_GR4_1 RI_ASCR2_GR4_1 /*!< GR4-1 I/O analog switch control */
#define LL_RI_IOSWITCH_GR4_2 RI_ASCR2_GR4_2 /*!< GR4-2 I/O analog switch control */
#define LL_RI_IOSWITCH_GR4_3 RI_ASCR2_GR4_3 /*!< GR4-3 I/O analog switch control */
#if defined(RI_ASCR2_CH0b)
#define LL_RI_IOSWITCH_CH0b RI_ASCR2_CH0b /*!< CH0b-GR03-3 I/O analog switch control */
#if defined(RI_ASCR2_CH1b)
#define LL_RI_IOSWITCH_CH1b RI_ASCR2_CH1b /*!< CH1b-GR03-4 I/O analog switch control */
#define LL_RI_IOSWITCH_CH2b RI_ASCR2_CH2b /*!< CH2b-GR03-5 I/O analog switch control */
#define LL_RI_IOSWITCH_CH3b RI_ASCR2_CH3b /*!< CH3b-GR09-3 I/O analog switch control */
#define LL_RI_IOSWITCH_CH6b RI_ASCR2_CH6b /*!< CH6b-GR09-4 I/O analog switch control */
#define LL_RI_IOSWITCH_CH7b RI_ASCR2_CH7b /*!< CH7b-GR02-3 I/O analog switch control */
#define LL_RI_IOSWITCH_CH8b RI_ASCR2_CH8b /*!< CH8b-GR02-4 I/O analog switch control */
#define LL_RI_IOSWITCH_CH9b RI_ASCR2_CH9b /*!< CH9b-GR02-5 I/O analog switch control */
#define LL_RI_IOSWITCH_CH10b RI_ASCR2_CH10b /*!< CH10b-GR07-5 I/O analog switch control */
#define LL_RI_IOSWITCH_CH11b RI_ASCR2_CH11b /*!< CH11b-GR07-6 I/O analog switch control */
#define LL_RI_IOSWITCH_CH12b RI_ASCR2_CH12b /*!< CH12b-GR07-7 I/O analog switch control */
#endif /* RI_ASCR2_CH1b */
#define LL_RI_IOSWITCH_GR6_3 RI_ASCR2_GR6_3 /*!< GR6-3 I/O analog switch control */
#define LL_RI_IOSWITCH_GR6_4 RI_ASCR2_GR6_4 /*!< GR6-4 I/O analog switch control */
#endif /* RI_ASCR2_CH0b */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_HSYTERESIS_PORT RI HSYTERESIS PORT
* @{
*/
#define LL_RI_HSYTERESIS_PORT_A 0U /*!< HYSTERESIS PORT A */
#define LL_RI_HSYTERESIS_PORT_B 1U /*!< HYSTERESIS PORT B */
#define LL_RI_HSYTERESIS_PORT_C 2U /*!< HYSTERESIS PORT C */
#define LL_RI_HSYTERESIS_PORT_D 3U /*!< HYSTERESIS PORT D */
#if defined(GPIOE)
#define LL_RI_HSYTERESIS_PORT_E 4U /*!< HYSTERESIS PORT E */
#endif /* GPIOE */
#if defined(GPIOF)
#define LL_RI_HSYTERESIS_PORT_F 5U /*!< HYSTERESIS PORT F */
#endif /* GPIOF */
#if defined(GPIOG)
#define LL_RI_HSYTERESIS_PORT_G 6U /*!< HYSTERESIS PORT G */
#endif /* GPIOG */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_PIN RI PIN
* @{
*/
#define LL_RI_PIN_0 ((uint16_t)0x0001U) /*!< Pin 0 selected */
#define LL_RI_PIN_1 ((uint16_t)0x0002U) /*!< Pin 1 selected */
#define LL_RI_PIN_2 ((uint16_t)0x0004U) /*!< Pin 2 selected */
#define LL_RI_PIN_3 ((uint16_t)0x0008U) /*!< Pin 3 selected */
#define LL_RI_PIN_4 ((uint16_t)0x0010U) /*!< Pin 4 selected */
#define LL_RI_PIN_5 ((uint16_t)0x0020U) /*!< Pin 5 selected */
#define LL_RI_PIN_6 ((uint16_t)0x0040U) /*!< Pin 6 selected */
#define LL_RI_PIN_7 ((uint16_t)0x0080U) /*!< Pin 7 selected */
#define LL_RI_PIN_8 ((uint16_t)0x0100U) /*!< Pin 8 selected */
#define LL_RI_PIN_9 ((uint16_t)0x0200U) /*!< Pin 9 selected */
#define LL_RI_PIN_10 ((uint16_t)0x0400U) /*!< Pin 10 selected */
#define LL_RI_PIN_11 ((uint16_t)0x0800U) /*!< Pin 11 selected */
#define LL_RI_PIN_12 ((uint16_t)0x1000U) /*!< Pin 12 selected */
#define LL_RI_PIN_13 ((uint16_t)0x2000U) /*!< Pin 13 selected */
#define LL_RI_PIN_14 ((uint16_t)0x4000U) /*!< Pin 14 selected */
#define LL_RI_PIN_15 ((uint16_t)0x8000U) /*!< Pin 15 selected */
#define LL_RI_PIN_ALL ((uint16_t)0xFFFFU) /*!< All pins selected */
/**
* @}
*/
#if defined(RI_ASMR1_PA)
/** @defgroup SYSTEM_LL_EC_PORT RI PORT
* @{
*/
#define LL_RI_PORT_A 0U /*!< PORT A */
#define LL_RI_PORT_B 1U /*!< PORT B */
#define LL_RI_PORT_C 2U /*!< PORT C */
#if defined(GPIOF)
#define LL_RI_PORT_F 3U /*!< PORT F */
#endif /* GPIOF */
#if defined(GPIOG)
#define LL_RI_PORT_G 4U /*!< PORT G */
#endif /* GPIOG */
/**
* @}
*/
#endif /* RI_ASMR1_PA */
/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
* @{
*/
#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */
#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
* @{
*/
/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
* @{
*/
/**
* @brief Set memory mapping at address 0x00000000
* @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory
* @param Memory This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_REMAP_FLASH
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
* @arg @ref LL_SYSCFG_REMAP_SRAM
* @arg @ref LL_SYSCFG_REMAP_FMC (*)
*
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory)
{
MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory);
}
/**
* @brief Get memory mapping at address 0x00000000
* @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_REMAP_FLASH
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
* @arg @ref LL_SYSCFG_REMAP_SRAM
* @arg @ref LL_SYSCFG_REMAP_FMC (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
{
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE));
}
/**
* @brief Return the boot mode as configured by user.
* @rmtoll SYSCFG_MEMRMP BOOT_MODE LL_SYSCFG_GetBootMode
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_BOOTMODE_FLASH
* @arg @ref LL_SYSCFG_BOOTMODE_SYSTEMFLASH
* @arg @ref LL_SYSCFG_BOOTMODE_FSMC (*)
* @arg @ref LL_SYSCFG_BOOTMODE_SRAM
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetBootMode(void)
{
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_BOOT_MODE));
}
/**
* @brief Enable internal pull-up on USB DP line.
* @rmtoll SYSCFG_PMC USB_PU LL_SYSCFG_EnableUSBPullUp
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableUSBPullUp(void)
{
SET_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU);
}
/**
* @brief Disable internal pull-up on USB DP line.
* @rmtoll SYSCFG_PMC USB_PU LL_SYSCFG_DisableUSBPullUp
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableUSBPullUp(void)
{
CLEAR_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU);
}
#if defined(LCD)
/**
* @brief Enable decoupling capacitance connection.
* @rmtoll SYSCFG_PMC LCD_CAPA LL_SYSCFG_EnableLCDCapacitanceConnection
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_LCDCAPA_PB2
* @arg @ref LL_SYSCFG_LCDCAPA_PB12
* @arg @ref LL_SYSCFG_LCDCAPA_PB0
* @arg @ref LL_SYSCFG_LCDCAPA_PE11
* @arg @ref LL_SYSCFG_LCDCAPA_PE12
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableLCDCapacitanceConnection(uint32_t Pin)
{
SET_BIT(SYSCFG->PMC, Pin);
}
/**
* @brief DIsable decoupling capacitance connection.
* @rmtoll SYSCFG_PMC LCD_CAPA LL_SYSCFG_DisableLCDCapacitanceConnection
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_LCDCAPA_PB2
* @arg @ref LL_SYSCFG_LCDCAPA_PB12
* @arg @ref LL_SYSCFG_LCDCAPA_PB0
* @arg @ref LL_SYSCFG_LCDCAPA_PE11
* @arg @ref LL_SYSCFG_LCDCAPA_PE12
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableLCDCapacitanceConnection(uint32_t Pin)
{
CLEAR_BIT(SYSCFG->PMC, Pin);
}
#endif /* LCD */
/**
* @brief Configure source input for the EXTI external interrupt.
* @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI4 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI5 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI6 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI7 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI8 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI9 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI10 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI11 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI12 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI13 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI14 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR1 EXTI15 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI0 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI1 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI2 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI3 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI8 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI9 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI10 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI11 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI12 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI13 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI14 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTI15 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI0 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI1 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI2 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI3 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI4 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI5 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI6 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI7 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI12 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI13 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI14 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTI15 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI0 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI1 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI2 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI3 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI4 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI5 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI6 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI7 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI8 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI9 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI10 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI11 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_SetEXTISource
* @param Port This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_PORTA
* @arg @ref LL_SYSCFG_EXTI_PORTB
* @arg @ref LL_SYSCFG_EXTI_PORTC
* @arg @ref LL_SYSCFG_EXTI_PORTD
* @arg @ref LL_SYSCFG_EXTI_PORTE (*)
* @arg @ref LL_SYSCFG_EXTI_PORTF (*)
* @arg @ref LL_SYSCFG_EXTI_PORTG (*)
* @arg @ref LL_SYSCFG_EXTI_PORTH
*
* (*) value not defined in all devices.
* @param Line This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_LINE0
* @arg @ref LL_SYSCFG_EXTI_LINE1
* @arg @ref LL_SYSCFG_EXTI_LINE2
* @arg @ref LL_SYSCFG_EXTI_LINE3
* @arg @ref LL_SYSCFG_EXTI_LINE4
* @arg @ref LL_SYSCFG_EXTI_LINE5
* @arg @ref LL_SYSCFG_EXTI_LINE6
* @arg @ref LL_SYSCFG_EXTI_LINE7
* @arg @ref LL_SYSCFG_EXTI_LINE8
* @arg @ref LL_SYSCFG_EXTI_LINE9
* @arg @ref LL_SYSCFG_EXTI_LINE10
* @arg @ref LL_SYSCFG_EXTI_LINE11
* @arg @ref LL_SYSCFG_EXTI_LINE12
* @arg @ref LL_SYSCFG_EXTI_LINE13
* @arg @ref LL_SYSCFG_EXTI_LINE14
* @arg @ref LL_SYSCFG_EXTI_LINE15
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
{
MODIFY_REG(SYSCFG->EXTICR[Line & 0x3U], (Line >> 16), Port << POSITION_VAL((Line >> 16)));
}
/**
* @brief Get the configured defined for specific EXTI Line
* @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI4 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI5 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI6 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI7 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI8 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI9 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI10 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI11 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI12 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI13 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI14 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR1 EXTI15 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI0 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI1 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI2 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI3 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI8 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI9 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI10 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI11 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI12 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI13 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI14 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTI15 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI0 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI1 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI2 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI3 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI4 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI5 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI6 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI7 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI12 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI13 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI14 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTI15 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI0 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI1 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI2 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI3 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI4 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI5 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI6 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI7 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI8 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI9 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI10 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI11 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_GetEXTISource
* @param Line This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_LINE0
* @arg @ref LL_SYSCFG_EXTI_LINE1
* @arg @ref LL_SYSCFG_EXTI_LINE2
* @arg @ref LL_SYSCFG_EXTI_LINE3
* @arg @ref LL_SYSCFG_EXTI_LINE4
* @arg @ref LL_SYSCFG_EXTI_LINE5
* @arg @ref LL_SYSCFG_EXTI_LINE6
* @arg @ref LL_SYSCFG_EXTI_LINE7
* @arg @ref LL_SYSCFG_EXTI_LINE8
* @arg @ref LL_SYSCFG_EXTI_LINE9
* @arg @ref LL_SYSCFG_EXTI_LINE10
* @arg @ref LL_SYSCFG_EXTI_LINE11
* @arg @ref LL_SYSCFG_EXTI_LINE12
* @arg @ref LL_SYSCFG_EXTI_LINE13
* @arg @ref LL_SYSCFG_EXTI_LINE14
* @arg @ref LL_SYSCFG_EXTI_LINE15
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_PORTA
* @arg @ref LL_SYSCFG_EXTI_PORTB
* @arg @ref LL_SYSCFG_EXTI_PORTC
* @arg @ref LL_SYSCFG_EXTI_PORTD
* @arg @ref LL_SYSCFG_EXTI_PORTE (*)
* @arg @ref LL_SYSCFG_EXTI_PORTF (*)
* @arg @ref LL_SYSCFG_EXTI_PORTG (*)
* @arg @ref LL_SYSCFG_EXTI_PORTH
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
{
return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0x3U], (Line >> 16)) >> POSITION_VAL(Line >> 16));
}
/**
* @}
*/
/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
* @{
*/
/**
* @brief Return the device identifier
* @note 0x416: Cat.1 device\n
* 0x429: Cat.2 device\n
* 0x427: Cat.3 device\n
* 0x436: Cat.4 device or Cat.3 device(1)\n
* 0x437: Cat.5 device\n
*
* (1) Cat.3 devices: STM32L15xxC or STM3216xxC devices with
* RPN ending with letter 'A', in WLCSP64 packages or with more then 100 pin.
* @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
* @retval Values between Min_Data=0x00 and Max_Data=0xFFF
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
}
/**
* @brief Return the device revision identifier
* @note This field indicates the revision of the device.
For example, it is read as Cat.1 RevA -> 0x1000, Cat.2 Rev Z -> 0x1018...
* @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
}
/**
* @brief Enable the Debug Module during SLEEP mode
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Disable the Debug Module during SLEEP mode
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Enable the Debug Module during STOP mode
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Disable the Debug Module during STOP mode
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Enable the Debug Module during STANDBY mode
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Disable the Debug Module during STANDBY mode
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Set Trace pin assignment control
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n
* DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment
* @param PinAssignment This parameter can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
{
MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
}
/**
* @brief Get Trace pin assignment control
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n
* DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment
* @retval Returned value can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
{
return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
}
/**
* @brief Freeze APB1 peripherals (group1 peripherals)
* @rmtoll APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->APB1FZ, Periphs);
}
/**
* @brief Unfreeze APB1 peripherals (group1 peripherals)
* @rmtoll APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->APB1FZ, Periphs);
}
/**
* @brief Freeze APB2 peripherals
* @rmtoll APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->APB2FZ, Periphs);
}
/**
* @brief Unfreeze APB2 peripherals
* @rmtoll APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
* APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
* APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
}
/**
* @}
*/
#if defined(COMP_CSR_VREFOUTEN)
/** @defgroup SYSTEM_LL_EF_VREFOUT VREFOUT
* @{
*/
/**
* @brief Enable the output of internal reference voltage (VrefInt) on I/O pin.
* @note The VrefInt output can be routed to any I/O in group 3:
* - For Cat.1 and Cat.2 devices: CH8 (PB0) or CH9 (PB1).
* - For Cat.3 devices: CH8 (PB0), CH9 (PB1) or CH0b (PB2).
* - For Cat.4 and Cat.5 devices: CH8 (PB0), CH9 (PB1), CH0b (PB2),
* CH1b (PF11) or CH2b (PF12).
* Note: Comparator peripheral clock must be preliminarily enabled.
* Refer to function "LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_COMP)".
* Note: In addition with this macro, VrefInt output buffer must be
* connected to the selected I/O pin. Refer to functions
* "LL_RI_EnableSwitchControlMode()" and "LL_RI_CloseIOSwitchLinkedToADC()".
* @note VrefInt output enable: Internal reference voltage connected to I/O group 3
* VrefInt output disable: Internal reference voltage disconnected from I/O group 3
* @rmtoll COMP_CSR VREFOUTEN LL_VREFOUT_Enable
* @retval None
*/
__STATIC_INLINE void LL_VREFOUT_Enable(void)
{
SET_BIT(COMP->CSR, COMP_CSR_VREFOUTEN);
}
/**
* @brief Disable the output of internal reference voltage (VrefInt) on I/O pin.
* @rmtoll COMP_CSR VREFOUTEN LL_VREFOUT_Disable
* @retval None
*/
__STATIC_INLINE void LL_VREFOUT_Disable(void)
{
CLEAR_BIT(COMP->CSR, COMP_CSR_VREFOUTEN);
}
/**
* @brief Check if output of internal reference voltage (VrefInt) is connected to I/O pin.
* @rmtoll COMP_CSR VREFOUTEN LL_VREFOUT_IsEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_VREFOUT_IsEnabled(void)
{
return ((READ_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) == COMP_CSR_VREFOUTEN) ? 1UL : 0UL);
}
/**
* @}
*/
#endif /* COMP_CSR_VREFOUTEN */
/** @defgroup SYSTEM_LL_EF_RI RI
* @{
*/
/**
* @brief Configures the routing interface to map Input Capture x of TIMx to a selected I/O pin.
* @rmtoll RI_ICR IC1OS LL_RI_SetRemapInputCapture_TIM\n
* RI_ICR IC2OS LL_RI_SetRemapInputCapture_TIM\n
* RI_ICR IC3OS LL_RI_SetRemapInputCapture_TIM\n
* RI_ICR IC4OS LL_RI_SetRemapInputCapture_TIM\n
* RI_ICR TIM LL_RI_SetRemapInputCapture_TIM\n
* RI_ICR IC1 LL_RI_SetRemapInputCapture_TIM\n
* RI_ICR IC2 LL_RI_SetRemapInputCapture_TIM\n
* RI_ICR IC3 LL_RI_SetRemapInputCapture_TIM\n
* RI_ICR IC4 LL_RI_SetRemapInputCapture_TIM
* @param TIM_Select This parameter can be one of the following values:
* @arg @ref LL_RI_TIM_SELECT_NONE
* @arg @ref LL_RI_TIM_SELECT_TIM2
* @arg @ref LL_RI_TIM_SELECT_TIM3
* @arg @ref LL_RI_TIM_SELECT_TIM4
* @param InputCaptureChannel This parameter can be one of the following values:
* @arg @ref LL_RI_INPUTCAPTURE_1
* @arg @ref LL_RI_INPUTCAPTURE_2
* @arg @ref LL_RI_INPUTCAPTURE_3
* @arg @ref LL_RI_INPUTCAPTURE_4
* @param Input This parameter can be one of the following values:
* @arg @ref LL_RI_INPUTCAPTUREROUTING_0
* @arg @ref LL_RI_INPUTCAPTUREROUTING_1
* @arg @ref LL_RI_INPUTCAPTUREROUTING_2
* @arg @ref LL_RI_INPUTCAPTUREROUTING_3
* @arg @ref LL_RI_INPUTCAPTUREROUTING_4
* @arg @ref LL_RI_INPUTCAPTUREROUTING_5
* @arg @ref LL_RI_INPUTCAPTUREROUTING_6
* @arg @ref LL_RI_INPUTCAPTUREROUTING_7
* @arg @ref LL_RI_INPUTCAPTUREROUTING_8
* @arg @ref LL_RI_INPUTCAPTUREROUTING_9
* @arg @ref LL_RI_INPUTCAPTUREROUTING_10
* @arg @ref LL_RI_INPUTCAPTUREROUTING_11
* @arg @ref LL_RI_INPUTCAPTUREROUTING_12 (*)
* @arg @ref LL_RI_INPUTCAPTUREROUTING_13 (*)
* @arg @ref LL_RI_INPUTCAPTUREROUTING_14 (*)
* @arg @ref LL_RI_INPUTCAPTUREROUTING_15 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RI_SetRemapInputCapture_TIM(uint32_t TIM_Select, uint32_t InputCaptureChannel, uint32_t Input)
{
MODIFY_REG(RI->ICR,
RI_ICR_TIM | (InputCaptureChannel & (RI_ICR_IC4 | RI_ICR_IC3 | RI_ICR_IC2 | RI_ICR_IC1)) | (InputCaptureChannel & (RI_ICR_IC4OS | RI_ICR_IC3OS | RI_ICR_IC2OS | RI_ICR_IC1OS)),
TIM_Select | (InputCaptureChannel & (RI_ICR_IC4 | RI_ICR_IC3 | RI_ICR_IC2 | RI_ICR_IC1)) | (Input << POSITION_VAL(InputCaptureChannel)));
}
/**
* @brief Disable the TIM Input capture remap (select the standard AF)
* @rmtoll RI_ICR IC1 LL_RI_DisableRemapInputCapture_TIM\n
* RI_ICR IC2 LL_RI_DisableRemapInputCapture_TIM\n
* RI_ICR IC3 LL_RI_DisableRemapInputCapture_TIM\n
* RI_ICR IC4 LL_RI_DisableRemapInputCapture_TIM
* @param InputCaptureChannel This parameter can be a combination of the following values:
* @arg @ref LL_RI_INPUTCAPTURE_1
* @arg @ref LL_RI_INPUTCAPTURE_2
* @arg @ref LL_RI_INPUTCAPTURE_3
* @arg @ref LL_RI_INPUTCAPTURE_4
* @retval None
*/
__STATIC_INLINE void LL_RI_DisableRemapInputCapture_TIM(uint32_t InputCaptureChannel)
{
CLEAR_BIT(RI->ICR, (InputCaptureChannel & (RI_ICR_IC4 | RI_ICR_IC3 | RI_ICR_IC2 | RI_ICR_IC1)));
}
/**
* @brief Close the routing interface Input Output switches linked to ADC.
* @rmtoll RI_ASCR1 CH LL_RI_CloseIOSwitchLinkedToADC\n
* RI_ASCR1 VCOMP LL_RI_CloseIOSwitchLinkedToADC
* @param IOSwitch This parameter can be a combination of the following values:
* @arg @ref LL_RI_IOSWITCH_CH0
* @arg @ref LL_RI_IOSWITCH_CH1
* @arg @ref LL_RI_IOSWITCH_CH2
* @arg @ref LL_RI_IOSWITCH_CH3
* @arg @ref LL_RI_IOSWITCH_CH4
* @arg @ref LL_RI_IOSWITCH_CH5
* @arg @ref LL_RI_IOSWITCH_CH6
* @arg @ref LL_RI_IOSWITCH_CH7
* @arg @ref LL_RI_IOSWITCH_CH8
* @arg @ref LL_RI_IOSWITCH_CH9
* @arg @ref LL_RI_IOSWITCH_CH10
* @arg @ref LL_RI_IOSWITCH_CH11
* @arg @ref LL_RI_IOSWITCH_CH12
* @arg @ref LL_RI_IOSWITCH_CH13
* @arg @ref LL_RI_IOSWITCH_CH14
* @arg @ref LL_RI_IOSWITCH_CH15
* @arg @ref LL_RI_IOSWITCH_CH18
* @arg @ref LL_RI_IOSWITCH_CH19
* @arg @ref LL_RI_IOSWITCH_CH20
* @arg @ref LL_RI_IOSWITCH_CH21
* @arg @ref LL_RI_IOSWITCH_CH22
* @arg @ref LL_RI_IOSWITCH_CH23
* @arg @ref LL_RI_IOSWITCH_CH24
* @arg @ref LL_RI_IOSWITCH_CH25
* @arg @ref LL_RI_IOSWITCH_VCOMP
* @arg @ref LL_RI_IOSWITCH_CH27 (*)
* @arg @ref LL_RI_IOSWITCH_CH28 (*)
* @arg @ref LL_RI_IOSWITCH_CH29 (*)
* @arg @ref LL_RI_IOSWITCH_CH30 (*)
* @arg @ref LL_RI_IOSWITCH_CH31 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RI_CloseIOSwitchLinkedToADC(uint32_t IOSwitch)
{
SET_BIT(RI->ASCR1, IOSwitch);
}
/**
* @brief Open the routing interface Input Output switches linked to ADC.
* @rmtoll RI_ASCR1 CH LL_RI_OpenIOSwitchLinkedToADC\n
* RI_ASCR1 VCOMP LL_RI_OpenIOSwitchLinkedToADC
* @param IOSwitch This parameter can be a combination of the following values:
* @arg @ref LL_RI_IOSWITCH_CH0
* @arg @ref LL_RI_IOSWITCH_CH1
* @arg @ref LL_RI_IOSWITCH_CH2
* @arg @ref LL_RI_IOSWITCH_CH3
* @arg @ref LL_RI_IOSWITCH_CH4
* @arg @ref LL_RI_IOSWITCH_CH5
* @arg @ref LL_RI_IOSWITCH_CH6
* @arg @ref LL_RI_IOSWITCH_CH7
* @arg @ref LL_RI_IOSWITCH_CH8
* @arg @ref LL_RI_IOSWITCH_CH9
* @arg @ref LL_RI_IOSWITCH_CH10
* @arg @ref LL_RI_IOSWITCH_CH11
* @arg @ref LL_RI_IOSWITCH_CH12
* @arg @ref LL_RI_IOSWITCH_CH13
* @arg @ref LL_RI_IOSWITCH_CH14
* @arg @ref LL_RI_IOSWITCH_CH15
* @arg @ref LL_RI_IOSWITCH_CH18
* @arg @ref LL_RI_IOSWITCH_CH19
* @arg @ref LL_RI_IOSWITCH_CH20
* @arg @ref LL_RI_IOSWITCH_CH21
* @arg @ref LL_RI_IOSWITCH_CH22
* @arg @ref LL_RI_IOSWITCH_CH23
* @arg @ref LL_RI_IOSWITCH_CH24
* @arg @ref LL_RI_IOSWITCH_CH25
* @arg @ref LL_RI_IOSWITCH_VCOMP
* @arg @ref LL_RI_IOSWITCH_CH27 (*)
* @arg @ref LL_RI_IOSWITCH_CH28 (*)
* @arg @ref LL_RI_IOSWITCH_CH29 (*)
* @arg @ref LL_RI_IOSWITCH_CH30 (*)
* @arg @ref LL_RI_IOSWITCH_CH31 (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RI_OpenIOSwitchLinkedToADC(uint32_t IOSwitch)
{
CLEAR_BIT(RI->ASCR1, IOSwitch);
}
/**
* @brief Enable the switch control mode.
* @rmtoll RI_ASCR1 SCM LL_RI_EnableSwitchControlMode
* @retval None
*/
__STATIC_INLINE void LL_RI_EnableSwitchControlMode(void)
{
SET_BIT(RI->ASCR1, RI_ASCR1_SCM);
}
/**
* @brief Disable the switch control mode.
* @rmtoll RI_ASCR1 SCM LL_RI_DisableSwitchControlMode
* @retval None
*/
__STATIC_INLINE void LL_RI_DisableSwitchControlMode(void)
{
CLEAR_BIT(RI->ASCR1, RI_ASCR1_SCM);
}
/**
* @brief Close the routing interface Input Output switches not linked to ADC.
* @rmtoll RI_ASCR2 GR10_1 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR10_2 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR10_3 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR10_4 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR6_1 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR6_2 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR5_1 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR5_2 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR5_3 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR4_1 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR4_2 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR4_3 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR4_4 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH0b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH1b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH2b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH3b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH6b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH7b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH8b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH9b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH10b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH11b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH12b LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR6_3 LL_RI_CloseIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR6_4 LL_RI_CloseIOSwitchNotLinkedToADC
* @param IOSwitch This parameter can be a combination of the following values:
* @arg @ref LL_RI_IOSWITCH_GR10_1
* @arg @ref LL_RI_IOSWITCH_GR10_2
* @arg @ref LL_RI_IOSWITCH_GR10_3
* @arg @ref LL_RI_IOSWITCH_GR10_4
* @arg @ref LL_RI_IOSWITCH_GR6_1
* @arg @ref LL_RI_IOSWITCH_GR6_2
* @arg @ref LL_RI_IOSWITCH_GR5_1
* @arg @ref LL_RI_IOSWITCH_GR5_2
* @arg @ref LL_RI_IOSWITCH_GR5_3
* @arg @ref LL_RI_IOSWITCH_GR4_1
* @arg @ref LL_RI_IOSWITCH_GR4_2
* @arg @ref LL_RI_IOSWITCH_GR4_3
* @arg @ref LL_RI_IOSWITCH_CH0b (*)
* @arg @ref LL_RI_IOSWITCH_CH1b (*)
* @arg @ref LL_RI_IOSWITCH_CH2b (*)
* @arg @ref LL_RI_IOSWITCH_CH3b (*)
* @arg @ref LL_RI_IOSWITCH_CH6b (*)
* @arg @ref LL_RI_IOSWITCH_CH7b (*)
* @arg @ref LL_RI_IOSWITCH_CH8b (*)
* @arg @ref LL_RI_IOSWITCH_CH9b (*)
* @arg @ref LL_RI_IOSWITCH_CH10b (*)
* @arg @ref LL_RI_IOSWITCH_CH11b (*)
* @arg @ref LL_RI_IOSWITCH_CH12b (*)
* @arg @ref LL_RI_IOSWITCH_GR6_3
* @arg @ref LL_RI_IOSWITCH_GR6_4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RI_CloseIOSwitchNotLinkedToADC(uint32_t IOSwitch)
{
SET_BIT(RI->ASCR2, IOSwitch);
}
/**
* @brief Open the routing interface Input Output switches not linked to ADC.
* @rmtoll RI_ASCR2 GR10_1 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR10_2 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR10_3 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR10_4 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR6_1 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR6_2 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR5_1 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR5_2 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR5_3 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR4_1 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR4_2 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR4_3 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR4_4 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH0b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH1b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH2b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH3b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH6b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH7b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH8b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH9b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH10b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH11b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 CH12b LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR6_3 LL_RI_OpenIOSwitchNotLinkedToADC\n
* RI_ASCR2 GR6_4 LL_RI_OpenIOSwitchNotLinkedToADC
* @param IOSwitch This parameter can be a combination of the following values:
* @arg @ref LL_RI_IOSWITCH_GR10_1
* @arg @ref LL_RI_IOSWITCH_GR10_2
* @arg @ref LL_RI_IOSWITCH_GR10_3
* @arg @ref LL_RI_IOSWITCH_GR10_4
* @arg @ref LL_RI_IOSWITCH_GR6_1
* @arg @ref LL_RI_IOSWITCH_GR6_2
* @arg @ref LL_RI_IOSWITCH_GR5_1
* @arg @ref LL_RI_IOSWITCH_GR5_2
* @arg @ref LL_RI_IOSWITCH_GR5_3
* @arg @ref LL_RI_IOSWITCH_GR4_1
* @arg @ref LL_RI_IOSWITCH_GR4_2
* @arg @ref LL_RI_IOSWITCH_GR4_3
* @arg @ref LL_RI_IOSWITCH_CH0b (*)
* @arg @ref LL_RI_IOSWITCH_CH1b (*)
* @arg @ref LL_RI_IOSWITCH_CH2b (*)
* @arg @ref LL_RI_IOSWITCH_CH3b (*)
* @arg @ref LL_RI_IOSWITCH_CH6b (*)
* @arg @ref LL_RI_IOSWITCH_CH7b (*)
* @arg @ref LL_RI_IOSWITCH_CH8b (*)
* @arg @ref LL_RI_IOSWITCH_CH9b (*)
* @arg @ref LL_RI_IOSWITCH_CH10b (*)
* @arg @ref LL_RI_IOSWITCH_CH11b (*)
* @arg @ref LL_RI_IOSWITCH_CH12b (*)
* @arg @ref LL_RI_IOSWITCH_GR6_3
* @arg @ref LL_RI_IOSWITCH_GR6_4
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RI_OpenIOSwitchNotLinkedToADC(uint32_t IOSwitch)
{
CLEAR_BIT(RI->ASCR2, IOSwitch);
}
/**
* @brief Enable Hysteresis of the input schmitt triger of the port X
* @rmtoll RI_HYSCR1 PA LL_RI_EnableHysteresis\n
* RI_HYSCR1 PB LL_RI_EnableHysteresis\n
* RI_HYSCR1 PC LL_RI_EnableHysteresis\n
* RI_HYSCR1 PD LL_RI_EnableHysteresis\n
* RI_HYSCR1 PE LL_RI_EnableHysteresis\n
* RI_HYSCR1 PF LL_RI_EnableHysteresis\n
* RI_HYSCR1 PG LL_RI_EnableHysteresis\n
* RI_HYSCR2 PA LL_RI_EnableHysteresis\n
* RI_HYSCR2 PB LL_RI_EnableHysteresis\n
* RI_HYSCR2 PC LL_RI_EnableHysteresis\n
* RI_HYSCR2 PD LL_RI_EnableHysteresis\n
* RI_HYSCR2 PE LL_RI_EnableHysteresis\n
* RI_HYSCR2 PF LL_RI_EnableHysteresis\n
* RI_HYSCR2 PG LL_RI_EnableHysteresis\n
* RI_HYSCR3 PA LL_RI_EnableHysteresis\n
* RI_HYSCR3 PB LL_RI_EnableHysteresis\n
* RI_HYSCR3 PC LL_RI_EnableHysteresis\n
* RI_HYSCR3 PD LL_RI_EnableHysteresis\n
* RI_HYSCR3 PE LL_RI_EnableHysteresis\n
* RI_HYSCR3 PF LL_RI_EnableHysteresis\n
* RI_HYSCR3 PG LL_RI_EnableHysteresis\n
* RI_HYSCR4 PA LL_RI_EnableHysteresis\n
* RI_HYSCR4 PB LL_RI_EnableHysteresis\n
* RI_HYSCR4 PC LL_RI_EnableHysteresis\n
* RI_HYSCR4 PD LL_RI_EnableHysteresis\n
* RI_HYSCR4 PE LL_RI_EnableHysteresis\n
* RI_HYSCR4 PF LL_RI_EnableHysteresis\n
* RI_HYSCR4 PG LL_RI_EnableHysteresis
* @param Port This parameter can be one of the following values:
* @arg @ref LL_RI_HSYTERESIS_PORT_A
* @arg @ref LL_RI_HSYTERESIS_PORT_B
* @arg @ref LL_RI_HSYTERESIS_PORT_C
* @arg @ref LL_RI_HSYTERESIS_PORT_D
* @arg @ref LL_RI_HSYTERESIS_PORT_E (*)
* @arg @ref LL_RI_HSYTERESIS_PORT_F (*)
* @arg @ref LL_RI_HSYTERESIS_PORT_G (*)
*
* (*) value not defined in all devices.
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_RI_PIN_0
* @arg @ref LL_RI_PIN_1
* @arg @ref LL_RI_PIN_2
* @arg @ref LL_RI_PIN_3
* @arg @ref LL_RI_PIN_4
* @arg @ref LL_RI_PIN_5
* @arg @ref LL_RI_PIN_6
* @arg @ref LL_RI_PIN_7
* @arg @ref LL_RI_PIN_8
* @arg @ref LL_RI_PIN_9
* @arg @ref LL_RI_PIN_10
* @arg @ref LL_RI_PIN_11
* @arg @ref LL_RI_PIN_12
* @arg @ref LL_RI_PIN_13
* @arg @ref LL_RI_PIN_14
* @arg @ref LL_RI_PIN_15
* @arg @ref LL_RI_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_RI_EnableHysteresis(uint32_t Port, uint32_t Pin)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->HYSCR1) + (Port >> 1U));
CLEAR_BIT(*reg, Pin << (16U * (Port & 1U)));
}
/**
* @brief Disable Hysteresis of the input schmitt triger of the port X
* @rmtoll RI_HYSCR1 PA LL_RI_DisableHysteresis\n
* RI_HYSCR1 PB LL_RI_DisableHysteresis\n
* RI_HYSCR1 PC LL_RI_DisableHysteresis\n
* RI_HYSCR1 PD LL_RI_DisableHysteresis\n
* RI_HYSCR1 PE LL_RI_DisableHysteresis\n
* RI_HYSCR1 PF LL_RI_DisableHysteresis\n
* RI_HYSCR1 PG LL_RI_DisableHysteresis\n
* RI_HYSCR2 PA LL_RI_DisableHysteresis\n
* RI_HYSCR2 PB LL_RI_DisableHysteresis\n
* RI_HYSCR2 PC LL_RI_DisableHysteresis\n
* RI_HYSCR2 PD LL_RI_DisableHysteresis\n
* RI_HYSCR2 PE LL_RI_DisableHysteresis\n
* RI_HYSCR2 PF LL_RI_DisableHysteresis\n
* RI_HYSCR2 PG LL_RI_DisableHysteresis\n
* RI_HYSCR3 PA LL_RI_DisableHysteresis\n
* RI_HYSCR3 PB LL_RI_DisableHysteresis\n
* RI_HYSCR3 PC LL_RI_DisableHysteresis\n
* RI_HYSCR3 PD LL_RI_DisableHysteresis\n
* RI_HYSCR3 PE LL_RI_DisableHysteresis\n
* RI_HYSCR3 PF LL_RI_DisableHysteresis\n
* RI_HYSCR3 PG LL_RI_DisableHysteresis\n
* RI_HYSCR4 PA LL_RI_DisableHysteresis\n
* RI_HYSCR4 PB LL_RI_DisableHysteresis\n
* RI_HYSCR4 PC LL_RI_DisableHysteresis\n
* RI_HYSCR4 PD LL_RI_DisableHysteresis\n
* RI_HYSCR4 PE LL_RI_DisableHysteresis\n
* RI_HYSCR4 PF LL_RI_DisableHysteresis\n
* RI_HYSCR4 PG LL_RI_DisableHysteresis
* @param Port This parameter can be one of the following values:
* @arg @ref LL_RI_HSYTERESIS_PORT_A
* @arg @ref LL_RI_HSYTERESIS_PORT_B
* @arg @ref LL_RI_HSYTERESIS_PORT_C
* @arg @ref LL_RI_HSYTERESIS_PORT_D
* @arg @ref LL_RI_HSYTERESIS_PORT_E (*)
* @arg @ref LL_RI_HSYTERESIS_PORT_F (*)
* @arg @ref LL_RI_HSYTERESIS_PORT_G (*)
*
* (*) value not defined in all devices.
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_RI_PIN_0
* @arg @ref LL_RI_PIN_1
* @arg @ref LL_RI_PIN_2
* @arg @ref LL_RI_PIN_3
* @arg @ref LL_RI_PIN_4
* @arg @ref LL_RI_PIN_5
* @arg @ref LL_RI_PIN_6
* @arg @ref LL_RI_PIN_7
* @arg @ref LL_RI_PIN_8
* @arg @ref LL_RI_PIN_9
* @arg @ref LL_RI_PIN_10
* @arg @ref LL_RI_PIN_11
* @arg @ref LL_RI_PIN_12
* @arg @ref LL_RI_PIN_13
* @arg @ref LL_RI_PIN_14
* @arg @ref LL_RI_PIN_15
* @arg @ref LL_RI_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_RI_DisableHysteresis(uint32_t Port, uint32_t Pin)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->HYSCR1) + ((Port >> 1U) << 2U));
SET_BIT(*reg, Pin << (16U * (Port & 1U)));
}
#if defined(RI_ASMR1_PA)
/**
* @brief Control analog switches of port X through the ADC interface or RI_ASCRx registers.
* @rmtoll RI_ASMR1 PA LL_RI_ControlSwitchByADC\n
* RI_ASMR1 PB LL_RI_ControlSwitchByADC\n
* RI_ASMR1 PC LL_RI_ControlSwitchByADC\n
* RI_ASMR1 PF LL_RI_ControlSwitchByADC\n
* RI_ASMR1 PG LL_RI_ControlSwitchByADC\n
* RI_ASMR2 PA LL_RI_ControlSwitchByADC\n
* RI_ASMR2 PB LL_RI_ControlSwitchByADC\n
* RI_ASMR2 PC LL_RI_ControlSwitchByADC\n
* RI_ASMR2 PF LL_RI_ControlSwitchByADC\n
* RI_ASMR2 PG LL_RI_ControlSwitchByADC\n
* RI_ASMR3 PA LL_RI_ControlSwitchByADC\n
* RI_ASMR3 PB LL_RI_ControlSwitchByADC\n
* RI_ASMR3 PC LL_RI_ControlSwitchByADC\n
* RI_ASMR3 PF LL_RI_ControlSwitchByADC\n
* RI_ASMR3 PG LL_RI_ControlSwitchByADC\n
* RI_ASMR4 PA LL_RI_ControlSwitchByADC\n
* RI_ASMR4 PB LL_RI_ControlSwitchByADC\n
* RI_ASMR4 PC LL_RI_ControlSwitchByADC\n
* RI_ASMR4 PF LL_RI_ControlSwitchByADC\n
* RI_ASMR4 PG LL_RI_ControlSwitchByADC\n
* RI_ASMR5 PA LL_RI_ControlSwitchByADC\n
* RI_ASMR5 PB LL_RI_ControlSwitchByADC\n
* RI_ASMR5 PC LL_RI_ControlSwitchByADC\n
* RI_ASMR5 PF LL_RI_ControlSwitchByADC\n
* RI_ASMR5 PG LL_RI_ControlSwitchByADC
* @param Port This parameter can be one of the following values:
* @arg @ref LL_RI_PORT_A
* @arg @ref LL_RI_PORT_B
* @arg @ref LL_RI_PORT_C
* @arg @ref LL_RI_PORT_F (*)
* @arg @ref LL_RI_PORT_G (*)
*
* (*) value not defined in all devices.
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_RI_PIN_0
* @arg @ref LL_RI_PIN_1
* @arg @ref LL_RI_PIN_2
* @arg @ref LL_RI_PIN_3
* @arg @ref LL_RI_PIN_4
* @arg @ref LL_RI_PIN_5
* @arg @ref LL_RI_PIN_6
* @arg @ref LL_RI_PIN_7
* @arg @ref LL_RI_PIN_8
* @arg @ref LL_RI_PIN_9
* @arg @ref LL_RI_PIN_10
* @arg @ref LL_RI_PIN_11
* @arg @ref LL_RI_PIN_12
* @arg @ref LL_RI_PIN_13
* @arg @ref LL_RI_PIN_14
* @arg @ref LL_RI_PIN_15
* @arg @ref LL_RI_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_RI_ControlSwitchByADC(uint32_t Port, uint32_t Pin)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->ASMR1) + ((Port * 3U) << 2));
CLEAR_BIT(*reg, Pin);
}
#endif /* RI_ASMR1_PA */
#if defined(RI_ASMR1_PA)
/**
* @brief Control analog switches of port X by the timer OC.
* @rmtoll RI_ASMR1 PA LL_RI_ControlSwitchByTIM\n
* RI_ASMR1 PB LL_RI_ControlSwitchByTIM\n
* RI_ASMR1 PC LL_RI_ControlSwitchByTIM\n
* RI_ASMR1 PF LL_RI_ControlSwitchByTIM\n
* RI_ASMR1 PG LL_RI_ControlSwitchByTIM\n
* RI_ASMR2 PA LL_RI_ControlSwitchByTIM\n
* RI_ASMR2 PB LL_RI_ControlSwitchByTIM\n
* RI_ASMR2 PC LL_RI_ControlSwitchByTIM\n
* RI_ASMR2 PF LL_RI_ControlSwitchByTIM\n
* RI_ASMR2 PG LL_RI_ControlSwitchByTIM\n
* RI_ASMR3 PA LL_RI_ControlSwitchByTIM\n
* RI_ASMR3 PB LL_RI_ControlSwitchByTIM\n
* RI_ASMR3 PC LL_RI_ControlSwitchByTIM\n
* RI_ASMR3 PF LL_RI_ControlSwitchByTIM\n
* RI_ASMR3 PG LL_RI_ControlSwitchByTIM\n
* RI_ASMR4 PA LL_RI_ControlSwitchByTIM\n
* RI_ASMR4 PB LL_RI_ControlSwitchByTIM\n
* RI_ASMR4 PC LL_RI_ControlSwitchByTIM\n
* RI_ASMR4 PF LL_RI_ControlSwitchByTIM\n
* RI_ASMR4 PG LL_RI_ControlSwitchByTIM\n
* RI_ASMR5 PA LL_RI_ControlSwitchByTIM\n
* RI_ASMR5 PB LL_RI_ControlSwitchByTIM\n
* RI_ASMR5 PC LL_RI_ControlSwitchByTIM\n
* RI_ASMR5 PF LL_RI_ControlSwitchByTIM\n
* RI_ASMR5 PG LL_RI_ControlSwitchByTIM
* @param Port This parameter can be one of the following values:
* @arg @ref LL_RI_PORT_A
* @arg @ref LL_RI_PORT_B
* @arg @ref LL_RI_PORT_C
* @arg @ref LL_RI_PORT_F (*)
* @arg @ref LL_RI_PORT_G (*)
*
* (*) value not defined in all devices.
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_RI_PIN_0
* @arg @ref LL_RI_PIN_1
* @arg @ref LL_RI_PIN_2
* @arg @ref LL_RI_PIN_3
* @arg @ref LL_RI_PIN_4
* @arg @ref LL_RI_PIN_5
* @arg @ref LL_RI_PIN_6
* @arg @ref LL_RI_PIN_7
* @arg @ref LL_RI_PIN_8
* @arg @ref LL_RI_PIN_9
* @arg @ref LL_RI_PIN_10
* @arg @ref LL_RI_PIN_11
* @arg @ref LL_RI_PIN_12
* @arg @ref LL_RI_PIN_13
* @arg @ref LL_RI_PIN_14
* @arg @ref LL_RI_PIN_15
* @arg @ref LL_RI_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_RI_ControlSwitchByTIM(uint32_t Port, uint32_t Pin)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->ASMR1) + ((Port * 3U) << 2));
SET_BIT(*reg, Pin);
}
#endif /* RI_ASMR1_PA */
#if defined(RI_CMR1_PA)
/**
* @brief Mask the input of port X during the capacitive sensing acquisition.
* @rmtoll RI_CMR1 PA LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR1 PB LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR1 PC LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR1 PF LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR1 PG LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR2 PA LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR2 PB LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR2 PC LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR2 PF LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR2 PG LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR3 PA LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR3 PB LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR3 PC LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR3 PF LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR3 PG LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR4 PA LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR4 PB LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR4 PC LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR4 PF LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR4 PG LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR5 PA LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR5 PB LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR5 PC LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR5 PF LL_RI_MaskChannelDuringAcquisition\n
* RI_CMR5 PG LL_RI_MaskChannelDuringAcquisition
* @param Port This parameter can be one of the following values:
* @arg @ref LL_RI_PORT_A
* @arg @ref LL_RI_PORT_B
* @arg @ref LL_RI_PORT_C
* @arg @ref LL_RI_PORT_F (*)
* @arg @ref LL_RI_PORT_G (*)
*
* (*) value not defined in all devices.
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_RI_PIN_0
* @arg @ref LL_RI_PIN_1
* @arg @ref LL_RI_PIN_2
* @arg @ref LL_RI_PIN_3
* @arg @ref LL_RI_PIN_4
* @arg @ref LL_RI_PIN_5
* @arg @ref LL_RI_PIN_6
* @arg @ref LL_RI_PIN_7
* @arg @ref LL_RI_PIN_8
* @arg @ref LL_RI_PIN_9
* @arg @ref LL_RI_PIN_10
* @arg @ref LL_RI_PIN_11
* @arg @ref LL_RI_PIN_12
* @arg @ref LL_RI_PIN_13
* @arg @ref LL_RI_PIN_14
* @arg @ref LL_RI_PIN_15
* @arg @ref LL_RI_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_RI_MaskChannelDuringAcquisition(uint32_t Port, uint32_t Pin)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->CMR1) + ((Port * 3U) << 2));
CLEAR_BIT(*reg, Pin);
}
#endif /* RI_CMR1_PA */
#if defined(RI_CMR1_PA)
/**
* @brief Unmask the input of port X during the capacitive sensing acquisition.
* @rmtoll RI_CMR1 PA LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR1 PB LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR1 PC LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR1 PF LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR1 PG LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR2 PA LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR2 PB LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR2 PC LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR2 PF LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR2 PG LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR3 PA LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR3 PB LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR3 PC LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR3 PF LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR3 PG LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR4 PA LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR4 PB LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR4 PC LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR4 PF LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR4 PG LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR5 PA LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR5 PB LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR5 PC LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR5 PF LL_RI_UnmaskChannelDuringAcquisition\n
* RI_CMR5 PG LL_RI_UnmaskChannelDuringAcquisition
* @param Port This parameter can be one of the following values:
* @arg @ref LL_RI_PORT_A
* @arg @ref LL_RI_PORT_B
* @arg @ref LL_RI_PORT_C
* @arg @ref LL_RI_PORT_F (*)
* @arg @ref LL_RI_PORT_G (*)
*
* (*) value not defined in all devices.
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_RI_PIN_0
* @arg @ref LL_RI_PIN_1
* @arg @ref LL_RI_PIN_2
* @arg @ref LL_RI_PIN_3
* @arg @ref LL_RI_PIN_4
* @arg @ref LL_RI_PIN_5
* @arg @ref LL_RI_PIN_6
* @arg @ref LL_RI_PIN_7
* @arg @ref LL_RI_PIN_8
* @arg @ref LL_RI_PIN_9
* @arg @ref LL_RI_PIN_10
* @arg @ref LL_RI_PIN_11
* @arg @ref LL_RI_PIN_12
* @arg @ref LL_RI_PIN_13
* @arg @ref LL_RI_PIN_14
* @arg @ref LL_RI_PIN_15
* @arg @ref LL_RI_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_RI_UnmaskChannelDuringAcquisition(uint32_t Port, uint32_t Pin)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->CMR1) + ((Port * 3U) << 2));
SET_BIT(*reg, Pin);
}
#endif /* RI_CMR1_PA */
#if defined(RI_CICR1_PA)
/**
* @brief Identify channel for timer input capture
* @rmtoll RI_CICR1 PA LL_RI_IdentifyChannelIO\n
* RI_CICR1 PB LL_RI_IdentifyChannelIO\n
* RI_CICR1 PC LL_RI_IdentifyChannelIO\n
* RI_CICR1 PF LL_RI_IdentifyChannelIO\n
* RI_CICR1 PG LL_RI_IdentifyChannelIO\n
* RI_CICR2 PA LL_RI_IdentifyChannelIO\n
* RI_CICR2 PB LL_RI_IdentifyChannelIO\n
* RI_CICR2 PC LL_RI_IdentifyChannelIO\n
* RI_CICR2 PF LL_RI_IdentifyChannelIO\n
* RI_CICR2 PG LL_RI_IdentifyChannelIO\n
* RI_CICR3 PA LL_RI_IdentifyChannelIO\n
* RI_CICR3 PB LL_RI_IdentifyChannelIO\n
* RI_CICR3 PC LL_RI_IdentifyChannelIO\n
* RI_CICR3 PF LL_RI_IdentifyChannelIO\n
* RI_CICR3 PG LL_RI_IdentifyChannelIO\n
* RI_CICR4 PA LL_RI_IdentifyChannelIO\n
* RI_CICR4 PB LL_RI_IdentifyChannelIO\n
* RI_CICR4 PC LL_RI_IdentifyChannelIO\n
* RI_CICR4 PF LL_RI_IdentifyChannelIO\n
* RI_CICR4 PG LL_RI_IdentifyChannelIO\n
* RI_CICR5 PA LL_RI_IdentifyChannelIO\n
* RI_CICR5 PB LL_RI_IdentifyChannelIO\n
* RI_CICR5 PC LL_RI_IdentifyChannelIO\n
* RI_CICR5 PF LL_RI_IdentifyChannelIO\n
* RI_CICR5 PG LL_RI_IdentifyChannelIO
* @param Port This parameter can be one of the following values:
* @arg @ref LL_RI_PORT_A
* @arg @ref LL_RI_PORT_B
* @arg @ref LL_RI_PORT_C
* @arg @ref LL_RI_PORT_F (*)
* @arg @ref LL_RI_PORT_G (*)
*
* (*) value not defined in all devices.
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_RI_PIN_0
* @arg @ref LL_RI_PIN_1
* @arg @ref LL_RI_PIN_2
* @arg @ref LL_RI_PIN_3
* @arg @ref LL_RI_PIN_4
* @arg @ref LL_RI_PIN_5
* @arg @ref LL_RI_PIN_6
* @arg @ref LL_RI_PIN_7
* @arg @ref LL_RI_PIN_8
* @arg @ref LL_RI_PIN_9
* @arg @ref LL_RI_PIN_10
* @arg @ref LL_RI_PIN_11
* @arg @ref LL_RI_PIN_12
* @arg @ref LL_RI_PIN_13
* @arg @ref LL_RI_PIN_14
* @arg @ref LL_RI_PIN_15
* @arg @ref LL_RI_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_RI_IdentifyChannelIO(uint32_t Port, uint32_t Pin)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->CICR1) + ((Port * 3U) << 2));
CLEAR_BIT(*reg, Pin);
}
#endif /* RI_CICR1_PA */
#if defined(RI_CICR1_PA)
/**
* @brief Identify sampling capacitor for timer input capture
* @rmtoll RI_CICR1 PA LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR1 PB LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR1 PC LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR1 PF LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR1 PG LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR2 PA LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR2 PB LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR2 PC LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR2 PF LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR2 PG LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR3 PA LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR3 PB LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR3 PC LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR3 PF LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR3 PG LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR4 PA LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR4 PB LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR4 PC LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR4 PF LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR4 PG LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR5 PA LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR5 PB LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR5 PC LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR5 PF LL_RI_IdentifySamplingCapacitorIO\n
* RI_CICR5 PG LL_RI_IdentifySamplingCapacitorIO
* @param Port This parameter can be one of the following values:
* @arg @ref LL_RI_PORT_A
* @arg @ref LL_RI_PORT_B
* @arg @ref LL_RI_PORT_C
* @arg @ref LL_RI_PORT_F (*)
* @arg @ref LL_RI_PORT_G (*)
*
* (*) value not defined in all devices.
* @param Pin This parameter can be a combination of the following values:
* @arg @ref LL_RI_PIN_0
* @arg @ref LL_RI_PIN_1
* @arg @ref LL_RI_PIN_2
* @arg @ref LL_RI_PIN_3
* @arg @ref LL_RI_PIN_4
* @arg @ref LL_RI_PIN_5
* @arg @ref LL_RI_PIN_6
* @arg @ref LL_RI_PIN_7
* @arg @ref LL_RI_PIN_8
* @arg @ref LL_RI_PIN_9
* @arg @ref LL_RI_PIN_10
* @arg @ref LL_RI_PIN_11
* @arg @ref LL_RI_PIN_12
* @arg @ref LL_RI_PIN_13
* @arg @ref LL_RI_PIN_14
* @arg @ref LL_RI_PIN_15
* @arg @ref LL_RI_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_RI_IdentifySamplingCapacitorIO(uint32_t Port, uint32_t Pin)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)((uint32_t)(&RI->CICR1) + ((Port * 3U) << 2));
SET_BIT(*reg, Pin);
}
#endif /* RI_CICR1_PA */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EF_FLASH FLASH
* @{
*/
/**
* @brief Set FLASH Latency
* @note Latetency can be modified only when ACC64 is set. (through function @ref LL_FLASH_Enable64bitAccess)
* @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
* @param Latency This parameter can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @retval None
*/
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
{
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
}
/**
* @brief Get FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
* @retval Returned value can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
*/
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
{
return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
}
/**
* @brief Enable Prefetch
* @note Prefetch can be enabled only when ACC64 is set. (through function @ref LL_FLASH_Enable64bitAccess)
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}
/**
* @brief Disable Prefetch
* @note Prefetch can be disabled only when ACC64 is set. (through function @ref LL_FLASH_Enable64bitAccess)
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}
/**
* @brief Check if Prefetch buffer is enabled
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
{
return ((READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == FLASH_ACR_PRFTEN) ? 1UL : 0UL);
}
/**
* @brief Enable 64-bit access
* @rmtoll FLASH_ACR ACC64 LL_FLASH_Enable64bitAccess
* @retval None
*/
__STATIC_INLINE void LL_FLASH_Enable64bitAccess(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_ACC64);
}
/**
* @brief Disable 64-bit access
* @rmtoll FLASH_ACR ACC64 LL_FLASH_Disable64bitAccess
* @retval None
*/
__STATIC_INLINE void LL_FLASH_Disable64bitAccess(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ACC64);
}
/**
* @brief Check if 64-bit access is enabled
* @rmtoll FLASH_ACR ACC64 LL_FLASH_Is64bitAccessEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_FLASH_Is64bitAccessEnabled(void)
{
return ((READ_BIT(FLASH->ACR, FLASH_ACR_ACC64) == FLASH_ACR_ACC64) ? 1UL : 0UL);
}
/**
* @brief Enable Flash Power-down mode during run mode or Low-power run mode
* @note Flash memory can be put in power-down mode only when the code is executed
* from RAM
* @note Flash must not be accessed when power down is enabled
* @note Flash must not be put in power-down while a program or an erase operation
* is on-going
* @rmtoll FLASH_ACR RUN_PD LL_FLASH_EnableRunPowerDown\n
* FLASH_PDKEYR PDKEY1 LL_FLASH_EnableRunPowerDown\n
* FLASH_PDKEYR PDKEY2 LL_FLASH_EnableRunPowerDown
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableRunPowerDown(void)
{
/* Following values must be written consecutively to unlock the RUN_PD bit in
FLASH_ACR */
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1);
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2);
SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD);
}
/**
* @brief Disable Flash Power-down mode during run mode or Low-power run mode
* @rmtoll FLASH_ACR RUN_PD LL_FLASH_DisableRunPowerDown\n
* FLASH_PDKEYR PDKEY1 LL_FLASH_DisableRunPowerDown\n
* FLASH_PDKEYR PDKEY2 LL_FLASH_DisableRunPowerDown
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableRunPowerDown(void)
{
/* Following values must be written consecutively to unlock the RUN_PD bit in
FLASH_ACR */
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1);
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2);
CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD);
}
/**
* @brief Enable Flash Power-down mode during Sleep or Low-power sleep mode
* @note Flash must not be put in power-down while a program or an erase operation
* is on-going
* @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_EnableSleepPowerDown
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableSleepPowerDown(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD);
}
/**
* @brief Disable Flash Power-down mode during Sleep or Low-power sleep mode
* @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_DisableSleepPowerDown
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableSleepPowerDown(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined(RI) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L1xx_LL_SYSTEM_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/