/* ----------------------------------------------------------------------
 * Project:      CMSIS DSP Library
 * Title:        arm_cmplx_mult_cmplx_q15.c
 * Description:  Q15 complex-by-complex multiplication
 *
 * $Date:        27. January 2017
 * $Revision:    V.1.5.1
 *
 * Target Processor: Cortex-M cores
 * -------------------------------------------------------------------- */
/*
 * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "arm_math.h"

/**
 * @ingroup groupCmplxMath
 */

/**
 * @addtogroup CmplxByCmplxMult
 * @{
 */

/**
 * @brief  Q15 complex-by-complex multiplication
 * @param[in]  *pSrcA points to the first input vector
 * @param[in]  *pSrcB points to the second input vector
 * @param[out]  *pDst  points to the output vector
 * @param[in]  numSamples number of complex samples in each vector
 * @return none.
 *
 * <b>Scaling and Overflow Behavior:</b>
 * \par
 * The function implements 1.15 by 1.15 multiplications and finally output is converted into 3.13 format.
 */

void arm_cmplx_mult_cmplx_q15(
  q15_t * pSrcA,
  q15_t * pSrcB,
  q15_t * pDst,
  uint32_t numSamples)
{
  q15_t a, b, c, d;                              /* Temporary variables to store real and imaginary values */

#if defined (ARM_MATH_DSP)

  /* Run the below code for Cortex-M4 and Cortex-M3 */
  uint32_t blkCnt;                               /* loop counters */

  /* loop Unrolling */
  blkCnt = numSamples >> 2U;

  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
   ** a second loop below computes the remaining 1 to 3 samples. */
  while (blkCnt > 0U)
  {
    /* C[2 * i] = A[2 * i] * B[2 * i] - A[2 * i + 1] * B[2 * i + 1].  */
    /* C[2 * i + 1] = A[2 * i] * B[2 * i + 1] + A[2 * i + 1] * B[2 * i].  */
    a = *pSrcA++;
    b = *pSrcA++;
    c = *pSrcB++;
    d = *pSrcB++;

    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * c) >> 17) - (((q31_t) b * d) >> 17);
    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * d) >> 17) + (((q31_t) b * c) >> 17);

    a = *pSrcA++;
    b = *pSrcA++;
    c = *pSrcB++;
    d = *pSrcB++;

    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * c) >> 17) - (((q31_t) b * d) >> 17);
    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * d) >> 17) + (((q31_t) b * c) >> 17);

    a = *pSrcA++;
    b = *pSrcA++;
    c = *pSrcB++;
    d = *pSrcB++;

    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * c) >> 17) - (((q31_t) b * d) >> 17);
    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * d) >> 17) + (((q31_t) b * c) >> 17);

    a = *pSrcA++;
    b = *pSrcA++;
    c = *pSrcB++;
    d = *pSrcB++;

    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * c) >> 17) - (((q31_t) b * d) >> 17);
    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * d) >> 17) + (((q31_t) b * c) >> 17);

    /* Decrement the blockSize loop counter */
    blkCnt--;
  }

  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
   ** No loop unrolling is used. */
  blkCnt = numSamples % 0x4U;

  while (blkCnt > 0U)
  {
    /* C[2 * i] = A[2 * i] * B[2 * i] - A[2 * i + 1] * B[2 * i + 1].  */
    /* C[2 * i + 1] = A[2 * i] * B[2 * i + 1] + A[2 * i + 1] * B[2 * i].  */
    a = *pSrcA++;
    b = *pSrcA++;
    c = *pSrcB++;
    d = *pSrcB++;

    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * c) >> 17) - (((q31_t) b * d) >> 17);
    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * d) >> 17) + (((q31_t) b * c) >> 17);

    /* Decrement the blockSize loop counter */
    blkCnt--;
  }

#else

  /* Run the below code for Cortex-M0 */

  while (numSamples > 0U)
  {
    /* C[2 * i] = A[2 * i] * B[2 * i] - A[2 * i + 1] * B[2 * i + 1].  */
    /* C[2 * i + 1] = A[2 * i] * B[2 * i + 1] + A[2 * i + 1] * B[2 * i].  */
    a = *pSrcA++;
    b = *pSrcA++;
    c = *pSrcB++;
    d = *pSrcB++;

    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * c) >> 17) - (((q31_t) b * d) >> 17);
    /* store the result in 3.13 format in the destination buffer. */
    *pDst++ =
      (q15_t) (q31_t) (((q31_t) a * d) >> 17) + (((q31_t) b * c) >> 17);

    /* Decrement the blockSize loop counter */
    numSamples--;
  }

#endif /* #if defined (ARM_MATH_DSP) */

}

/**
 * @} end of CmplxByCmplxMult group
 */