WebSVN – canSerial – Diff – /trunk/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c

 /**
   ******************************************************************************
   * @file    stm32f1xx_hal.c
   * @author  MCD Application Team
   * @brief   HAL module driver.
   *          This is the common part of the HAL initialization
   *
-  @verbatim
+  ******************************************************************************
-  ==============================================================================
+  * @attention
-                     ##### How to use this driver #####
+  *
-  ==============================================================================
+  * Copyright (c) 2016 STMicroelectronics.
-    [..]
+  * All rights reserved.
-    The common HAL driver contains a set of generic and common APIs that can be
+  *
-    used by the PPP peripheral drivers and the user to start using the HAL.
+  * This software is licensed under terms that can be found in the LICENSE file
-    [..]
+  * in the root directory of this software component.
-    The HAL contains two APIs' categories:
+  * If no LICENSE file comes with this software, it is provided AS-IS.
-         (+) Common HAL APIs
+  *
-         (+) Services HAL APIs
+  ******************************************************************************
+  @verbatim
-  @endverbatim
+  ==============================================================================
-  ******************************************************************************
+                     ##### How to use this driver #####
-  * @attention
+  ==============================================================================
-  *
+    [..]
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+    The common HAL driver contains a set of generic and common APIs that can be
-  * All rights reserved.</center></h2>
+    used by the PPP peripheral drivers and the user to start using the HAL.
-  *
+    [..]
-  * This software component is licensed by ST under BSD 3-Clause license,
+    The HAL contains two APIs' categories:
-  * the "License"; You may not use this file except in compliance with the
+         (+) Common HAL APIs
-  * License. You may obtain a copy of the License at:
+         (+) Services HAL APIs
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
+  @endverbatim
   ******************************************************************************
   */
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f1xx_hal.h"
 /** @addtogroup STM32F1xx_HAL_Driver
   * @{
   */
 /** @defgroup HAL HAL
   * @brief HAL module driver.
   * @{
   */
 #ifdef HAL_MODULE_ENABLED
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /** @defgroup HAL_Private_Constants HAL Private Constants
   * @{
   */
 /**
- * @brief STM32F1xx HAL Driver version number V1.1.8
+ * @brief STM32F1xx HAL Driver version number
    */
 #define __STM32F1xx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
 #define __STM32F1xx_HAL_VERSION_SUB1   (0x01U) /*!< [23:16] sub1 version */
-#define __STM32F1xx_HAL_VERSION_SUB2   (0x08U) /*!< [15:8]  sub2 version */
+#define __STM32F1xx_HAL_VERSION_SUB2   (0x09U) /*!< [15:8]  sub2 version */
 #define __STM32F1xx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32F1xx_HAL_VERSION         ((__STM32F1xx_HAL_VERSION_MAIN << 24)\
                                         |(__STM32F1xx_HAL_VERSION_SUB1 << 16)\
                                         |(__STM32F1xx_HAL_VERSION_SUB2 << 8 )\
                                         |(__STM32F1xx_HAL_VERSION_RC))
 #define IDCODE_DEVID_MASK    0x00000FFFU
 /**
   * @}
   */
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /** @defgroup HAL_Private_Variables HAL Private Variables
   * @{
   */
 __IO uint32_t uwTick;
 uint32_t uwTickPrio   = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
 HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT;  /* 1KHz */
 /**
   * @}
   */
 /* Private function prototypes -----------------------------------------------*/
 /* Exported functions ---------------------------------------------------------*/
 /** @defgroup HAL_Exported_Functions HAL Exported Functions
   * @{
   */
 /** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
  *  @brief    Initialization and de-initialization functions
  *
 @verbatim
  ===============================================================================
               ##### Initialization and de-initialization functions #####
  ===============================================================================
    [..]  This section provides functions allowing to:
       (+) Initializes the Flash interface, the NVIC allocation and initial clock
           configuration. It initializes the systick also when timeout is needed
           and the backup domain when enabled.
       (+) de-Initializes common part of the HAL.
       (+) Configure The time base source to have 1ms time base with a dedicated
           Tick interrupt priority.
         (++) SysTick timer is used by default as source of time base, but user
              can eventually implement his proper time base source (a general purpose
              timer for example or other time source), keeping in mind that Time base
              duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
              handled in milliseconds basis.
         (++) Time base configuration function (HAL_InitTick ()) is called automatically
              at the beginning of the program after reset by HAL_Init() or at any time
              when clock is configured, by HAL_RCC_ClockConfig().
         (++) Source of time base is configured  to generate interrupts at regular
              time intervals. Care must be taken if HAL_Delay() is called from a
              peripheral ISR process, the Tick interrupt line must have higher priority
             (numerically lower) than the peripheral interrupt. Otherwise the caller
             ISR process will be blocked.
        (++) functions affecting time base configurations are declared as __weak
              to make  override possible  in case of other  implementations in user file.
 @endverbatim
   * @{
   */
 /**
   * @brief  This function is used to initialize the HAL Library; it must be the first
   *         instruction to be executed in the main program (before to call any other
   *         HAL function), it performs the following:
   *           Configure the Flash prefetch.
   *           Configures the SysTick to generate an interrupt each 1 millisecond,
   *           which is clocked by the HSI (at this stage, the clock is not yet
   *           configured and thus the system is running from the internal HSI at 16 MHz).
   *           Set NVIC Group Priority to 4.
   *           Calls the HAL_MspInit() callback function defined in user file
   *           "stm32f1xx_hal_msp.c" to do the global low level hardware initialization
   *
   * @note   SysTick is used as time base for the HAL_Delay() function, the application
   *         need to ensure that the SysTick time base is always set to 1 millisecond
   *         to have correct HAL operation.
   * @retval HAL status
   */
 HAL_StatusTypeDef HAL_Init(void)
 {
   /* Configure Flash prefetch */
 #if (PREFETCH_ENABLE != 0)
 #if defined(STM32F101x6) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
     defined(STM32F102x6) || defined(STM32F102xB) || \
     defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
     defined(STM32F105xC) || defined(STM32F107xC)
   /* Prefetch buffer is not available on value line devices */
   __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
 #endif
 #endif /* PREFETCH_ENABLE */
   /* Set Interrupt Group Priority */
   HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
   /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
   HAL_InitTick(TICK_INT_PRIORITY);
   /* Init the low level hardware */
   HAL_MspInit();
   /* Return function status */
   return HAL_OK;
 }
 /**
   * @brief This function de-Initializes common part of the HAL and stops the systick.
   *        of time base.
   * @note This function is optional.
   * @retval HAL status
   */
 HAL_StatusTypeDef HAL_DeInit(void)
 {
   /* Reset of all peripherals */
   __HAL_RCC_APB1_FORCE_RESET();
   __HAL_RCC_APB1_RELEASE_RESET();
   __HAL_RCC_APB2_FORCE_RESET();
   __HAL_RCC_APB2_RELEASE_RESET();
 #if defined(STM32F105xC) || defined(STM32F107xC)
   __HAL_RCC_AHB_FORCE_RESET();
   __HAL_RCC_AHB_RELEASE_RESET();
 #endif
   /* De-Init the low level hardware */
   HAL_MspDeInit();
   /* Return function status */
   return HAL_OK;
 }
 /**
   * @brief  Initialize the MSP.
   * @retval None
   */
 __weak void HAL_MspInit(void)
 {
   /* NOTE : This function should not be modified, when the callback is needed,
             the HAL_MspInit could be implemented in the user file
    */
 }
 /**
   * @brief  DeInitializes the MSP.
   * @retval None
   */
 __weak void HAL_MspDeInit(void)
 {
   /* NOTE : This function should not be modified, when the callback is needed,
             the HAL_MspDeInit could be implemented in the user file
    */
 }
 /**
   * @brief This function configures the source of the time base.
   *        The time source is configured  to have 1ms time base with a dedicated
   *        Tick interrupt priority.
   * @note This function is called  automatically at the beginning of program after
   *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig().
   * @note In the default implementation, SysTick timer is the source of time base.
   *       It is used to generate interrupts at regular time intervals.
   *       Care must be taken if HAL_Delay() is called from a peripheral ISR process,
   *       The SysTick interrupt must have higher priority (numerically lower)
   *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
   *       The function is declared as __weak  to be overwritten  in case of other
   *       implementation  in user file.
   * @param TickPriority Tick interrupt priority.
   * @retval HAL status
   */
 __weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
 {
   /* Configure the SysTick to have interrupt in 1ms time basis*/
   if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
   {
     return HAL_ERROR;
   }
   /* Configure the SysTick IRQ priority */
   if (TickPriority < (1UL << __NVIC_PRIO_BITS))
   {
     HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
     uwTickPrio = TickPriority;
   }
   else
   {
     return HAL_ERROR;
   }
   /* Return function status */
   return HAL_OK;
 }
 /**
   * @}
   */
 /** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
   *  @brief    HAL Control functions
   *
 @verbatim
  ===============================================================================
                       ##### HAL Control functions #####
  ===============================================================================
     [..]  This section provides functions allowing to:
       (+) Provide a tick value in millisecond
       (+) Provide a blocking delay in millisecond
       (+) Suspend the time base source interrupt
       (+) Resume the time base source interrupt
       (+) Get the HAL API driver version
       (+) Get the device identifier
       (+) Get the device revision identifier
       (+) Enable/Disable Debug module during SLEEP mode
       (+) Enable/Disable Debug module during STOP mode
       (+) Enable/Disable Debug module during STANDBY mode
 @endverbatim
   * @{
   */
 /**
   * @brief This function is called to increment  a global variable "uwTick"
   *        used as application time base.
   * @note In the default implementation, this variable is incremented each 1ms
   *       in SysTick ISR.
   * @note This function is declared as __weak to be overwritten in case of other
   *      implementations in user file.
   * @retval None
   */
 __weak void HAL_IncTick(void)
 {
   uwTick += uwTickFreq;
 }
 /**
   * @brief Provides a tick value in millisecond.
   * @note  This function is declared as __weak to be overwritten in case of other
   *       implementations in user file.
   * @retval tick value
   */
 __weak uint32_t HAL_GetTick(void)
 {
   return uwTick;
 }
 /**
   * @brief This function returns a tick priority.
   * @retval tick priority
   */
 uint32_t HAL_GetTickPrio(void)
 {
   return uwTickPrio;
 }
 /**
   * @brief Set new tick Freq.
   * @retval status
   */
 HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
 {
   HAL_StatusTypeDef status  = HAL_OK;
   HAL_TickFreqTypeDef prevTickFreq;
   assert_param(IS_TICKFREQ(Freq));
   if (uwTickFreq != Freq)
   {
     /* Back up uwTickFreq frequency */
     prevTickFreq = uwTickFreq;
     /* Update uwTickFreq global variable used by HAL_InitTick() */
     uwTickFreq = Freq;
     /* Apply the new tick Freq  */
     status = HAL_InitTick(uwTickPrio);
     if (status != HAL_OK)
     {
       /* Restore previous tick frequency */
       uwTickFreq = prevTickFreq;
     }
   }
   return status;
 }
 /**
   * @brief Return tick frequency.
-  * @retval tick period in Hz
+  * @retval Tick frequency.
-  */
+  *         Value of @ref HAL_TickFreqTypeDef.
-HAL_TickFreqTypeDef HAL_GetTickFreq(void)
+  */
-{
+HAL_TickFreqTypeDef HAL_GetTickFreq(void)
-  return uwTickFreq;
+{
-}
+  return uwTickFreq;
+}
-/**
-  * @brief This function provides minimum delay (in milliseconds) based
+/**
-  *        on variable incremented.
+  * @brief This function provides minimum delay (in milliseconds) based
-  * @note In the default implementation , SysTick timer is the source of time base.
+  *        on variable incremented.
-  *       It is used to generate interrupts at regular time intervals where uwTick
+  * @note In the default implementation , SysTick timer is the source of time base.
-  *       is incremented.
+  *       It is used to generate interrupts at regular time intervals where uwTick
-  * @note This function is declared as __weak to be overwritten in case of other
+  *       is incremented.
-  *       implementations in user file.
+  * @note This function is declared as __weak to be overwritten in case of other
-  * @param Delay specifies the delay time length, in milliseconds.
+  *       implementations in user file.
-  * @retval None
+  * @param Delay specifies the delay time length, in milliseconds.
-  */
+  * @retval None
-__weak void HAL_Delay(uint32_t Delay)
+  */
-{
+__weak void HAL_Delay(uint32_t Delay)
-  uint32_t tickstart = HAL_GetTick();
+{
-  uint32_t wait = Delay;
+  uint32_t tickstart = HAL_GetTick();
+  uint32_t wait = Delay;
-  /* Add a freq to guarantee minimum wait */
-  if (wait < HAL_MAX_DELAY)
+  /* Add a freq to guarantee minimum wait */
-  {
+  if (wait < HAL_MAX_DELAY)
-    wait += (uint32_t)(uwTickFreq);
+  {
-  }
+    wait += (uint32_t)(uwTickFreq);
+  }
-  while ((HAL_GetTick() - tickstart) < wait)
-  {
+  while ((HAL_GetTick() - tickstart) < wait)
-  }
+  {
-}
+  }
+}
-/**
-  * @brief Suspend Tick increment.
+/**
-  * @note In the default implementation , SysTick timer is the source of time base. It is
+  * @brief Suspend Tick increment.
-  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  * @note In the default implementation , SysTick timer is the source of time base. It is
-  *       is called, the SysTick interrupt will be disabled and so Tick increment
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
-  *       is suspended.
+  *       is called, the SysTick interrupt will be disabled and so Tick increment
-  * @note This function is declared as __weak to be overwritten in case of other
+  *       is suspended.
-  *       implementations in user file.
+  * @note This function is declared as __weak to be overwritten in case of other
-  * @retval None
+  *       implementations in user file.
-  */
+  * @retval None
-__weak void HAL_SuspendTick(void)
+  */
-{
+__weak void HAL_SuspendTick(void)
-  /* Disable SysTick Interrupt */
+{
-  CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+  /* Disable SysTick Interrupt */
-}
+  CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
-/**
-  * @brief Resume Tick increment.
+/**
-  * @note In the default implementation , SysTick timer is the source of time base. It is
+  * @brief Resume Tick increment.
-  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  * @note In the default implementation , SysTick timer is the source of time base. It is
-  *       is called, the SysTick interrupt will be enabled and so Tick increment
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
-  *       is resumed.
+  *       is called, the SysTick interrupt will be enabled and so Tick increment
-  * @note This function is declared as __weak to be overwritten in case of other
+  *       is resumed.
-  *       implementations in user file.
+  * @note This function is declared as __weak to be overwritten in case of other
-  * @retval None
+  *       implementations in user file.
-  */
+  * @retval None
-__weak void HAL_ResumeTick(void)
+  */
-{
+__weak void HAL_ResumeTick(void)
-  /* Enable SysTick Interrupt */
+{
-  SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+  /* Enable SysTick Interrupt */
-}
+  SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
-/**
-  * @brief  Returns the HAL revision
+/**
-  * @retval version 0xXYZR (8bits for each decimal, R for RC)
+  * @brief  Returns the HAL revision
-  */
+  * @retval version 0xXYZR (8bits for each decimal, R for RC)
-uint32_t HAL_GetHalVersion(void)
+  */
-{
+uint32_t HAL_GetHalVersion(void)
-  return __STM32F1xx_HAL_VERSION;
+{
-}
+  return __STM32F1xx_HAL_VERSION;
+}
-/**
-  * @brief Returns the device revision identifier.
+/**
-  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  * @brief Returns the device revision identifier.
-  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
-  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
-  *                  STM32F10xx4 and STM32F10xx6
+  *                  STM32F101xF/G and STM32F103xF/G
-  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *                  STM32F10xx4 and STM32F10xx6
-  *       debug mode (not accessible by the user software in normal mode).
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
-  *       Refer to errata sheet of these devices for more details.
+  *       debug mode (not accessible by the user software in normal mode).
-  * @retval Device revision identifier
+  *       Refer to errata sheet of these devices for more details.
-  */
+  * @retval Device revision identifier
-uint32_t HAL_GetREVID(void)
+  */
-{
+uint32_t HAL_GetREVID(void)
-  return ((DBGMCU->IDCODE) >> DBGMCU_IDCODE_REV_ID_Pos);
+{
-}
+  return ((DBGMCU->IDCODE) >> DBGMCU_IDCODE_REV_ID_Pos);
+}
-/**
-  * @brief  Returns the device identifier.
+/**
-  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  * @brief  Returns the device identifier.
-  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
-  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
-  *                  STM32F10xx4 and STM32F10xx6
+  *                  STM32F101xF/G and STM32F103xF/G
-  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *                  STM32F10xx4 and STM32F10xx6
-  *       debug mode (not accessible by the user software in normal mode).
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
-  *       Refer to errata sheet of these devices for more details.
+  *       debug mode (not accessible by the user software in normal mode).
-  * @retval Device identifier
+  *       Refer to errata sheet of these devices for more details.
-  */
+  * @retval Device identifier
-uint32_t HAL_GetDEVID(void)
+  */
-{
+uint32_t HAL_GetDEVID(void)
-  return ((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+{
-}
+  return ((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
-/**
-  * @brief  Returns first word of the unique device identifier (UID based on 96 bits)
+/**
-  * @retval Device identifier
+  * @brief  Returns first word of the unique device identifier (UID based on 96 bits)
-  */
+  * @retval Device identifier
-uint32_t HAL_GetUIDw0(void)
+  */
-{
+uint32_t HAL_GetUIDw0(void)
-   return(READ_REG(*((uint32_t *)UID_BASE)));
+{
-}
+   return(READ_REG(*((uint32_t *)UID_BASE)));
+}
-/**
-  * @brief  Returns second word of the unique device identifier (UID based on 96 bits)
+/**
-  * @retval Device identifier
+  * @brief  Returns second word of the unique device identifier (UID based on 96 bits)
-  */
+  * @retval Device identifier
-uint32_t HAL_GetUIDw1(void)
+  */
-{
+uint32_t HAL_GetUIDw1(void)
-   return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+{
-}
+   return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
-/**
-  * @brief  Returns third word of the unique device identifier (UID based on 96 bits)
+/**
-  * @retval Device identifier
+  * @brief  Returns third word of the unique device identifier (UID based on 96 bits)
-  */
+  * @retval Device identifier
-uint32_t HAL_GetUIDw2(void)
+  */
-{
+uint32_t HAL_GetUIDw2(void)
-   return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+{
-}
+   return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
-/**
-  * @brief  Enable the Debug Module during SLEEP mode
+/**
-  * @retval None
+  * @brief  Enable the Debug Module during SLEEP mode
-  */
+  * @retval None
-void HAL_DBGMCU_EnableDBGSleepMode(void)
+  */
-{
+void HAL_DBGMCU_EnableDBGSleepMode(void)
-  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+{
-}
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
-/**
-  * @brief  Disable the Debug Module during SLEEP mode
+/**
-  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  * @brief  Disable the Debug Module during SLEEP mode
-  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
-  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
-  *                  STM32F10xx4 and STM32F10xx6
+  *                  STM32F101xF/G and STM32F103xF/G
-  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *                  STM32F10xx4 and STM32F10xx6
-  *       debug mode (not accessible by the user software in normal mode).
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
-  *       Refer to errata sheet of these devices for more details.
+  *       debug mode (not accessible by the user software in normal mode).
-  * @retval None
+  *       Refer to errata sheet of these devices for more details.
-  */
+  * @retval None
-void HAL_DBGMCU_DisableDBGSleepMode(void)
+  */
-{
+void HAL_DBGMCU_DisableDBGSleepMode(void)
-  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+{
-}
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
-/**
-  * @brief  Enable the Debug Module during STOP mode
+/**
-  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  * @brief  Enable the Debug Module during STOP mode
-  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
-  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
-  *                  STM32F10xx4 and STM32F10xx6
+  *                  STM32F101xF/G and STM32F103xF/G
-  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *                  STM32F10xx4 and STM32F10xx6
-  *       debug mode (not accessible by the user software in normal mode).
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
-  *       Refer to errata sheet of these devices for more details.
+  *       debug mode (not accessible by the user software in normal mode).
-  * Note: On all STM32F1 devices:
+  *       Refer to errata sheet of these devices for more details.
-  *       If the system tick timer interrupt is enabled during the Stop mode
+  * Note: On all STM32F1 devices:
-  *       debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
+  *       If the system tick timer interrupt is enabled during the Stop mode
-  *       the system from Stop mode.
+  *       debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
-  *       Workaround: To debug the Stop mode, disable the system tick timer
+  *       the system from Stop mode.
-  *       interrupt.
+  *       Workaround: To debug the Stop mode, disable the system tick timer
-  *       Refer to errata sheet of these devices for more details.
+  *       interrupt.
-  * Note: On all STM32F1 devices:
+  *       Refer to errata sheet of these devices for more details.
-  *       If the system tick timer interrupt is enabled during the Stop mode
+  * Note: On all STM32F1 devices:
-  *       debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
+  *       If the system tick timer interrupt is enabled during the Stop mode
-  *       the system from Stop mode.
+  *       debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
-  *       Workaround: To debug the Stop mode, disable the system tick timer
+  *       the system from Stop mode.
-  *       interrupt.
+  *       Workaround: To debug the Stop mode, disable the system tick timer
-  *       Refer to errata sheet of these devices for more details.
+  *       interrupt.
-  * @retval None
+  *       Refer to errata sheet of these devices for more details.
-  */
+  * @retval None
-void HAL_DBGMCU_EnableDBGStopMode(void)
+  */
-{
+void HAL_DBGMCU_EnableDBGStopMode(void)
-  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+{
-}
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
-/**
-  * @brief  Disable the Debug Module during STOP mode
+/**
-  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  * @brief  Disable the Debug Module during STOP mode
-  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
-  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
-  *                  STM32F10xx4 and STM32F10xx6
+  *                  STM32F101xF/G and STM32F103xF/G
-  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *                  STM32F10xx4 and STM32F10xx6
-  *       debug mode (not accessible by the user software in normal mode).
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
-  *       Refer to errata sheet of these devices for more details.
+  *       debug mode (not accessible by the user software in normal mode).
-  * @retval None
+  *       Refer to errata sheet of these devices for more details.
-  */
+  * @retval None
-void HAL_DBGMCU_DisableDBGStopMode(void)
+  */
-{
+void HAL_DBGMCU_DisableDBGStopMode(void)
-  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+{
-}
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
-/**
-  * @brief  Enable the Debug Module during STANDBY mode
+/**
-  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  * @brief  Enable the Debug Module during STANDBY mode
-  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
-  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
-  *                  STM32F10xx4 and STM32F10xx6
+  *                  STM32F101xF/G and STM32F103xF/G
-  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *                  STM32F10xx4 and STM32F10xx6
-  *       debug mode (not accessible by the user software in normal mode).
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
-  *       Refer to errata sheet of these devices for more details.
+  *       debug mode (not accessible by the user software in normal mode).
-  * @retval None
+  *       Refer to errata sheet of these devices for more details.
-  */
+  * @retval None
-void HAL_DBGMCU_EnableDBGStandbyMode(void)
+  */
-{
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
-  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+{
-}
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
-/**
-  * @brief  Disable the Debug Module during STANDBY mode
+/**
-  * Note: On devices STM32F10xx8 and STM32F10xxB,
+  * @brief  Disable the Debug Module during STANDBY mode
-  *                  STM32F101xC/D/E and STM32F103xC/D/E,
+  * Note: On devices STM32F10xx8 and STM32F10xxB,
-  *                  STM32F101xF/G and STM32F103xF/G
+  *                  STM32F101xC/D/E and STM32F103xC/D/E,
-  *                  STM32F10xx4 and STM32F10xx6
+  *                  STM32F101xF/G and STM32F103xF/G
-  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
+  *                  STM32F10xx4 and STM32F10xx6
-  *       debug mode (not accessible by the user software in normal mode).
+  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
-  *       Refer to errata sheet of these devices for more details.
+  *       debug mode (not accessible by the user software in normal mode).
-  * @retval None
+  *       Refer to errata sheet of these devices for more details.
-  */
+  * @retval None
-void HAL_DBGMCU_DisableDBGStandbyMode(void)
+  */
-{
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
-  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+{
-}
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
-/**
-  * @}
+/**
-  */
+  * @}
+  */
-/**
-  * @}
+/**
-  */
+  * @}
+  */
-#endif /* HAL_MODULE_ENABLED */
-/**
+#endif /* HAL_MODULE_ENABLED */
-  * @}
+/**
-  */
+  * @}
+  */
-/**
-  * @}
+/**
-  */
+  * @}
+  */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Subversion Repositories canSerial

(root)/trunk/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c – Rev 2 → 3