Rev 2 | Show entire file | Ignore whitespace | Details | Blame | Last modification | View Log | RSS feed
| Rev 2 | Rev 3 | ||
|---|---|---|---|
| Line 1... | Line 1... | ||
| 1 | /** |
1 | /** |
| 2 | ****************************************************************************** |
2 | ****************************************************************************** |
| 3 | * @file stm32f1xx_ll_usb.h |
3 | * @file stm32f1xx_ll_usb.h |
| 4 | * @author MCD Application Team |
4 | * @author MCD Application Team |
| 5 | * @brief Header file of USB Low Layer HAL module. |
5 | * @brief Header file of USB Low Layer HAL module. |
| 6 | ****************************************************************************** |
6 | ****************************************************************************** |
| 7 | * @attention |
7 | * @attention |
| 8 | * |
8 | * |
| 9 | * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
9 | * Copyright (c) 2016 STMicroelectronics. |
| 10 | * All rights reserved.</center></h2> |
10 | * All rights reserved. |
| 11 | * |
11 | * |
| 12 | * This software component is licensed by ST under BSD 3-Clause license, |
12 | * This software is licensed under terms that can be found in the LICENSE file |
| 13 | * the "License"; You may not use this file except in compliance with the |
13 | * in the root directory of this software component. |
| 14 | * License. You may obtain a copy of the License at: |
14 | * If no LICENSE file comes with this software, it is provided AS-IS. |
| 15 | * opensource.org/licenses/BSD-3-Clause |
15 | * |
| 16 | * |
16 | ****************************************************************************** |
| 17 | ****************************************************************************** |
17 | */ |
| 18 | */ |
18 | |
| 19 | 19 | /* Define to prevent recursive inclusion -------------------------------------*/ |
|
| 20 | /* Define to prevent recursive inclusion -------------------------------------*/ |
20 | #ifndef STM32F1xx_LL_USB_H |
| 21 | #ifndef STM32F1xx_LL_USB_H |
21 | #define STM32F1xx_LL_USB_H |
| 22 | #define STM32F1xx_LL_USB_H |
22 | |
| 23 | 23 | #ifdef __cplusplus |
|
| 24 | #ifdef __cplusplus |
24 | extern "C" { |
| 25 | extern "C" { |
25 | #endif /* __cplusplus */ |
| 26 | #endif |
26 | |
| 27 | 27 | /* Includes ------------------------------------------------------------------*/ |
|
| 28 | /* Includes ------------------------------------------------------------------*/ |
28 | #include "stm32f1xx_hal_def.h" |
| 29 | #include "stm32f1xx_hal_def.h" |
29 | |
| 30 | 30 | #if defined (USB) || defined (USB_OTG_FS) |
|
| 31 | #if defined (USB) || defined (USB_OTG_FS) |
31 | /** @addtogroup STM32F1xx_HAL_Driver |
| 32 | /** @addtogroup STM32F1xx_HAL_Driver |
32 | * @{ |
| 33 | * @{ |
33 | */ |
| 34 | */ |
34 | |
| 35 | 35 | /** @addtogroup USB_LL |
|
| 36 | /** @addtogroup USB_LL |
36 | * @{ |
| 37 | * @{ |
37 | */ |
| 38 | */ |
38 | |
| 39 | 39 | /* Exported types ------------------------------------------------------------*/ |
|
| 40 | /* Exported types ------------------------------------------------------------*/ |
40 | |
| 41 | 41 | /** |
|
| 42 | /** |
42 | * @brief USB Mode definition |
| 43 | * @brief USB Mode definition |
43 | */ |
| 44 | */ |
44 | |
| 45 | #if defined (USB_OTG_FS) |
45 | typedef enum |
| 46 | 46 | { |
|
| 47 | typedef enum |
47 | USB_DEVICE_MODE = 0, |
| 48 | { |
48 | USB_HOST_MODE = 1, |
| 49 | USB_DEVICE_MODE = 0, |
49 | USB_DRD_MODE = 2 |
| 50 | USB_HOST_MODE = 1, |
50 | } USB_ModeTypeDef; |
| 51 | USB_DRD_MODE = 2 |
51 | |
| 52 | } USB_ModeTypeDef; |
52 | /** |
| 53 | 53 | * @brief URB States definition |
|
| 54 | /** |
54 | */ |
| 55 | * @brief URB States definition |
55 | typedef enum |
| 56 | */ |
56 | { |
| 57 | typedef enum |
57 | URB_IDLE = 0, |
| 58 | { |
58 | URB_DONE, |
| 59 | URB_IDLE = 0, |
59 | URB_NOTREADY, |
| 60 | URB_DONE, |
60 | URB_NYET, |
| 61 | URB_NOTREADY, |
61 | URB_ERROR, |
| 62 | URB_NYET, |
62 | URB_STALL |
| 63 | URB_ERROR, |
63 | } USB_URBStateTypeDef; |
| 64 | URB_STALL |
64 | |
| 65 | } USB_OTG_URBStateTypeDef; |
65 | /** |
| 66 | 66 | * @brief Host channel States definition |
|
| 67 | /** |
67 | */ |
| 68 | * @brief Host channel States definition |
68 | typedef enum |
| 69 | */ |
69 | { |
| 70 | typedef enum |
70 | HC_IDLE = 0, |
| 71 | { |
71 | HC_XFRC, |
| 72 | HC_IDLE = 0, |
72 | HC_HALTED, |
| 73 | HC_XFRC, |
73 | HC_ACK, |
| 74 | HC_HALTED, |
74 | HC_NAK, |
| 75 | HC_NAK, |
75 | HC_NYET, |
| 76 | HC_NYET, |
76 | HC_STALL, |
| 77 | HC_STALL, |
77 | HC_XACTERR, |
| 78 | HC_XACTERR, |
78 | HC_BBLERR, |
| 79 | HC_BBLERR, |
79 | HC_DATATGLERR |
| 80 | HC_DATATGLERR |
80 | } USB_HCStateTypeDef; |
| 81 | } USB_OTG_HCStateTypeDef; |
81 | |
| 82 | 82 | ||
| 83 | /** |
83 | /** |
| 84 | * @brief USB Instance Initialization Structure definition |
84 | * @brief USB Instance Initialization Structure definition |
| 85 | */ |
85 | */ |
| 86 | typedef struct |
86 | typedef struct |
| 87 | { |
87 | { |
| 88 | uint32_t dev_endpoints; /*!< Device Endpoints number. |
88 | uint32_t dev_endpoints; /*!< Device Endpoints number. |
| 89 | This parameter depends on the used USB core. |
89 | This parameter depends on the used USB core. |
| 90 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
90 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
| 91 | 91 | ||
| 92 | uint32_t Host_channels; /*!< Host Channels number. |
92 | #if defined (USB_OTG_FS) |
| 93 | This parameter Depends on the used USB core. |
93 | uint32_t Host_channels; /*!< Host Channels number. |
| 94 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
94 | This parameter Depends on the used USB core. |
| 95 | 95 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
| 96 | uint32_t speed; /*!< USB Core speed. |
96 | |
| 97 | This parameter can be any value of @ref PCD_Speed/HCD_Speed |
97 | uint32_t dma_enable; /*!< USB DMA state. |
| 98 | (HCD_SPEED_xxx, HCD_SPEED_xxx) */ |
98 | If DMA is not supported this parameter shall be set by default to zero */ |
| 99 | 99 | #endif /* defined (USB_OTG_FS) */ |
|
| 100 | uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */ |
100 | |
| 101 | 101 | uint32_t speed; /*!< USB Core speed. |
|
| 102 | uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ |
102 | This parameter can be any value of @ref PCD_Speed/HCD_Speed |
| 103 | 103 | (HCD_SPEED_xxx, HCD_SPEED_xxx) */ |
|
| 104 | uint32_t phy_itface; /*!< Select the used PHY interface. |
104 | |
| 105 | This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ |
105 | uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ |
| 106 | 106 | ||
| 107 | uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ |
107 | uint32_t phy_itface; /*!< Select the used PHY interface. |
| 108 | 108 | This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ |
|
| 109 | uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ |
109 | |
| 110 | 110 | uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ |
|
| 111 | uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ |
111 | |
| 112 | 112 | uint32_t low_power_enable; /*!< Enable or disable the low Power Mode. */ |
|
| 113 | uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ |
113 | |
| 114 | 114 | uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ |
|
| 115 | uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ |
115 | |
| 116 | 116 | uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ |
|
| 117 | uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ |
117 | |
| 118 | 118 | #if defined (USB_OTG_FS) |
|
| 119 | uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ |
119 | uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ |
| 120 | 120 | ||
| 121 | } USB_OTG_CfgTypeDef; |
121 | uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ |
| 122 | 122 | ||
| 123 | typedef struct |
123 | uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ |
| 124 | { |
124 | #endif /* defined (USB_OTG_FS) */ |
| 125 | uint8_t num; /*!< Endpoint number |
125 | } USB_CfgTypeDef; |
| 126 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
126 | |
| 127 | 127 | typedef struct |
|
| 128 | uint8_t is_in; /*!< Endpoint direction |
128 | { |
| 129 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
129 | uint8_t num; /*!< Endpoint number |
| 130 | 130 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
| 131 | uint8_t is_stall; /*!< Endpoint stall condition |
131 | |
| 132 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
132 | uint8_t is_in; /*!< Endpoint direction |
| 133 | 133 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
| 134 | uint8_t type; /*!< Endpoint type |
134 | |
| 135 | This parameter can be any value of @ref USB_LL_EP_Type */ |
135 | uint8_t is_stall; /*!< Endpoint stall condition |
| 136 | 136 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
| 137 | uint8_t data_pid_start; /*!< Initial data PID |
137 | |
| 138 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
138 | #if defined (USB_OTG_FS) |
| 139 | 139 | uint8_t is_iso_incomplete; /*!< Endpoint isoc condition |
|
| 140 | uint8_t even_odd_frame; /*!< IFrame parity |
140 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
| 141 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
141 | #endif /* defined (USB_OTG_FS) */ |
| 142 | 142 | ||
| 143 | uint16_t tx_fifo_num; /*!< Transmission FIFO number |
143 | uint8_t type; /*!< Endpoint type |
| 144 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
144 | This parameter can be any value of @ref USB_LL_EP_Type */ |
| 145 | 145 | ||
| 146 | uint32_t maxpacket; /*!< Endpoint Max packet size |
146 | uint8_t data_pid_start; /*!< Initial data PID |
| 147 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
147 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
| 148 | 148 | ||
| 149 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ |
149 | #if defined (USB) |
| 150 | 150 | uint16_t pmaadress; /*!< PMA Address |
|
| 151 | uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ |
151 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
| 152 | 152 | ||
| 153 | uint32_t xfer_len; /*!< Current transfer length */ |
153 | uint16_t pmaaddr0; /*!< PMA Address0 |
| 154 | 154 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
|
| 155 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ |
155 | |
| 156 | } USB_OTG_EPTypeDef; |
156 | uint16_t pmaaddr1; /*!< PMA Address1 |
| 157 | 157 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
|
| 158 | typedef struct |
158 | |
| 159 | { |
159 | uint8_t doublebuffer; /*!< Double buffer enable |
| 160 | uint8_t dev_addr; /*!< USB device address. |
160 | This parameter can be 0 or 1 */ |
| 161 | This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ |
161 | #endif /* defined (USB) */ |
| 162 | 162 | ||
| 163 | uint8_t ch_num; /*!< Host channel number. |
163 | uint32_t maxpacket; /*!< Endpoint Max packet size |
| 164 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
164 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
| 165 | 165 | ||
| 166 | uint8_t ep_num; /*!< Endpoint number. |
166 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ |
| 167 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
167 | |
| 168 | 168 | uint32_t xfer_len; /*!< Current transfer length */ |
|
| 169 | uint8_t ep_is_in; /*!< Endpoint direction |
169 | |
| 170 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
170 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ |
| 171 | 171 | ||
| 172 | uint8_t speed; /*!< USB Host Channel speed. |
172 | #if defined (USB_OTG_FS) |
| 173 | This parameter can be any value of @ref HCD_Device_Speed: |
173 | uint8_t even_odd_frame; /*!< IFrame parity |
| 174 | (HCD_DEVICE_SPEED_xxx) */ |
174 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
| 175 | 175 | ||
| 176 | uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ |
176 | uint16_t tx_fifo_num; /*!< Transmission FIFO number |
| 177 | 177 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
| 178 | uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ |
178 | |
| 179 | 179 | uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ |
|
| 180 | uint8_t ep_type; /*!< Endpoint Type. |
180 | |
| 181 | This parameter can be any value of @ref USB_LL_EP_Type */ |
181 | uint32_t xfer_size; /*!< requested transfer size */ |
| 182 | 182 | #endif /* defined (USB_OTG_FS) */ |
|
| 183 | uint16_t max_packet; /*!< Endpoint Max packet size. |
183 | |
| 184 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
184 | #if defined (USB) |
| 185 | 185 | uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ |
|
| 186 | uint8_t data_pid; /*!< Initial data PID. |
186 | |
| 187 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
187 | uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ |
| 188 | 188 | #endif /* defined (USB) */ |
|
| 189 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ |
189 | } USB_EPTypeDef; |
| 190 | 190 | ||
| 191 | uint32_t XferSize; /*!< OTG Channel transfer size. */ |
191 | typedef struct |
| 192 | 192 | { |
|
| 193 | uint32_t xfer_len; /*!< Current transfer length. */ |
193 | uint8_t dev_addr; /*!< USB device address. |
| 194 | 194 | This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ |
|
| 195 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ |
195 | |
| 196 | 196 | uint8_t ch_num; /*!< Host channel number. |
|
| 197 | uint8_t toggle_in; /*!< IN transfer current toggle flag. |
197 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
| 198 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
198 | |
| 199 | 199 | uint8_t ep_num; /*!< Endpoint number. |
|
| 200 | uint8_t toggle_out; /*!< OUT transfer current toggle flag |
200 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
| 201 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
201 | |
| 202 | 202 | uint8_t ep_is_in; /*!< Endpoint direction |
|
| 203 | uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ |
203 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
| 204 | 204 | ||
| 205 | uint32_t ErrCnt; /*!< Host channel error count. */ |
205 | uint8_t speed; /*!< USB Host Channel speed. |
| 206 | 206 | This parameter can be any value of @ref HCD_Device_Speed: |
|
| 207 | USB_OTG_URBStateTypeDef urb_state; /*!< URB state. |
207 | (HCD_DEVICE_SPEED_xxx) */ |
| 208 | This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ |
208 | |
| 209 | 209 | uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ |
|
| 210 | USB_OTG_HCStateTypeDef state; /*!< Host Channel state. |
210 | |
| 211 | This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ |
211 | uint8_t hub_port_nbr; /*!< USB HUB port number */ |
| 212 | } USB_OTG_HCTypeDef; |
212 | uint8_t hub_addr; /*!< USB HUB address */ |
| 213 | #endif /* defined (USB_OTG_FS) */ |
213 | |
| 214 | 214 | uint8_t ep_type; /*!< Endpoint Type. |
|
| 215 | #if defined (USB) |
215 | This parameter can be any value of @ref USB_LL_EP_Type */ |
| 216 | 216 | ||
| 217 | typedef enum |
217 | uint16_t max_packet; /*!< Endpoint Max packet size. |
| 218 | { |
218 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
| 219 | USB_DEVICE_MODE = 0 |
219 | |
| 220 | } USB_ModeTypeDef; |
220 | uint8_t data_pid; /*!< Initial data PID. |
| 221 | 221 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
| 222 | /** |
222 | |
| 223 | * @brief USB Initialization Structure definition |
223 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ |
| 224 | */ |
224 | |
| 225 | typedef struct |
225 | uint32_t XferSize; /*!< OTG Channel transfer size. */ |
| 226 | { |
226 | |
| 227 | uint32_t dev_endpoints; /*!< Device Endpoints number. |
227 | uint32_t xfer_len; /*!< Current transfer length. */ |
| 228 | This parameter depends on the used USB core. |
228 | |
| 229 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
229 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ |
| 230 | 230 | ||
| 231 | uint32_t speed; /*!< USB Core speed. |
231 | uint8_t toggle_in; /*!< IN transfer current toggle flag. |
| 232 | This parameter can be any value of @ref PCD_Speed/HCD_Speed |
232 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
| 233 | (HCD_SPEED_xxx, HCD_SPEED_xxx) */ |
233 | |
| 234 | 234 | uint8_t toggle_out; /*!< OUT transfer current toggle flag |
|
| 235 | uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ |
235 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
| 236 | 236 | ||
| 237 | uint32_t phy_itface; /*!< Select the used PHY interface. |
237 | uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ |
| 238 | This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ |
238 | |
| 239 | 239 | uint32_t ErrCnt; /*!< Host channel error count. */ |
|
| 240 | uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ |
240 | |
| 241 | 241 | USB_URBStateTypeDef urb_state; /*!< URB state. |
|
| 242 | uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ |
242 | This parameter can be any value of @ref USB_URBStateTypeDef */ |
| 243 | 243 | ||
| 244 | uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ |
244 | USB_HCStateTypeDef state; /*!< Host Channel state. |
| 245 | 245 | This parameter can be any value of @ref USB_HCStateTypeDef */ |
|
| 246 | uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ |
246 | } USB_HCTypeDef; |
| 247 | } USB_CfgTypeDef; |
247 | |
| 248 | 248 | #if defined (USB_OTG_FS) |
|
| 249 | typedef struct |
249 | typedef USB_ModeTypeDef USB_OTG_ModeTypeDef; |
| 250 | { |
250 | typedef USB_CfgTypeDef USB_OTG_CfgTypeDef; |
| 251 | uint8_t num; /*!< Endpoint number |
251 | typedef USB_EPTypeDef USB_OTG_EPTypeDef; |
| 252 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
252 | typedef USB_URBStateTypeDef USB_OTG_URBStateTypeDef; |
| 253 | 253 | typedef USB_HCStateTypeDef USB_OTG_HCStateTypeDef; |
|
| 254 | uint8_t is_in; /*!< Endpoint direction |
254 | typedef USB_HCTypeDef USB_OTG_HCTypeDef; |
| 255 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
255 | #endif /* defined (USB_OTG_FS) */ |
| 256 | 256 | ||
| 257 | uint8_t is_stall; /*!< Endpoint stall condition |
257 | /* Exported constants --------------------------------------------------------*/ |
| 258 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
258 | |
| 259 | 259 | /** @defgroup PCD_Exported_Constants PCD Exported Constants |
|
| 260 | uint8_t type; /*!< Endpoint type |
260 | * @{ |
| 261 | This parameter can be any value of @ref USB_EP_Type */ |
261 | */ |
| 262 | 262 | ||
| 263 | uint8_t data_pid_start; /*!< Initial data PID |
263 | #if defined (USB_OTG_FS) |
| 264 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
264 | /** @defgroup USB_OTG_CORE VERSION ID |
| 265 | 265 | * @{ |
|
| 266 | uint16_t pmaadress; /*!< PMA Address |
266 | */ |
| 267 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
267 | #define USB_OTG_CORE_ID_300A 0x4F54300AU |
| 268 | 268 | #define USB_OTG_CORE_ID_310A 0x4F54310AU |
|
| 269 | uint16_t pmaaddr0; /*!< PMA Address0 |
269 | /** |
| 270 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
270 | * @} |
| 271 | 271 | */ |
|
| 272 | uint16_t pmaaddr1; /*!< PMA Address1 |
272 | |
| 273 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
273 | /** @defgroup USB_Core_Mode_ USB Core Mode |
| 274 | 274 | * @{ |
|
| 275 | uint8_t doublebuffer; /*!< Double buffer enable |
275 | */ |
| 276 | This parameter can be 0 or 1 */ |
276 | #define USB_OTG_MODE_DEVICE 0U |
| 277 | 277 | #define USB_OTG_MODE_HOST 1U |
|
| 278 | uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used |
278 | #define USB_OTG_MODE_DRD 2U |
| 279 | only by USB OTG FS peripheral |
279 | /** |
| 280 | This parameter is added to ensure compatibility across USB peripherals */ |
280 | * @} |
| 281 | 281 | */ |
|
| 282 | uint32_t maxpacket; /*!< Endpoint Max packet size |
282 | |
| 283 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
283 | /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed |
| 284 | 284 | * @{ |
|
| 285 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ |
285 | */ |
| 286 | 286 | #define USB_OTG_SPEED_FULL 3U |
|
| 287 | uint32_t xfer_len; /*!< Current transfer length */ |
287 | /** |
| 288 | 288 | * @} |
|
| 289 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ |
289 | */ |
| 290 | 290 | ||
| 291 | uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ |
291 | /** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY |
| 292 | 292 | * @{ |
|
| 293 | uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ |
293 | */ |
| 294 | 294 | #define USB_OTG_EMBEDDED_PHY 2U |
|
| 295 | } USB_EPTypeDef; |
295 | /** |
| 296 | #endif /* defined (USB) */ |
296 | * @} |
| 297 | 297 | */ |
|
| 298 | /* Exported constants --------------------------------------------------------*/ |
298 | |
| 299 | 299 | /** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value |
|
| 300 | /** @defgroup PCD_Exported_Constants PCD Exported Constants |
300 | * @{ |
| 301 | * @{ |
301 | */ |
| 302 | */ |
302 | #ifndef USBD_FS_TRDT_VALUE |
| 303 | 303 | #define USBD_FS_TRDT_VALUE 5U |
|
| 304 | #if defined (USB_OTG_FS) |
304 | #define USBD_DEFAULT_TRDT_VALUE 9U |
| 305 | /** @defgroup USB_OTG_CORE VERSION ID |
305 | #endif /* USBD_HS_TRDT_VALUE */ |
| 306 | * @{ |
306 | /** |
| 307 | */ |
307 | * @} |
| 308 | #define USB_OTG_CORE_ID_300A 0x4F54300AU |
308 | */ |
| 309 | #define USB_OTG_CORE_ID_310A 0x4F54310AU |
309 | |
| 310 | /** |
310 | /** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS |
| 311 | * @} |
311 | * @{ |
| 312 | */ |
312 | */ |
| 313 | 313 | #define USB_OTG_FS_MAX_PACKET_SIZE 64U |
|
| 314 | /** @defgroup USB_Core_Mode_ USB Core Mode |
314 | #define USB_OTG_MAX_EP0_SIZE 64U |
| 315 | * @{ |
315 | /** |
| 316 | */ |
316 | * @} |
| 317 | #define USB_OTG_MODE_DEVICE 0U |
317 | */ |
| 318 | #define USB_OTG_MODE_HOST 1U |
318 | |
| 319 | #define USB_OTG_MODE_DRD 2U |
319 | /** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency |
| 320 | /** |
320 | * @{ |
| 321 | * @} |
321 | */ |
| 322 | */ |
322 | #define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) |
| 323 | 323 | #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) |
|
| 324 | /** @defgroup USB_LL Device Speed |
324 | #define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) |
| 325 | * @{ |
325 | /** |
| 326 | */ |
326 | * @} |
| 327 | #define USBD_FS_SPEED 2U |
327 | */ |
| 328 | #define USBH_FSLS_SPEED 1U |
328 | |
| 329 | /** |
329 | /** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval |
| 330 | * @} |
330 | * @{ |
| 331 | */ |
331 | */ |
| 332 | 332 | #define DCFG_FRAME_INTERVAL_80 0U |
|
| 333 | /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed |
333 | #define DCFG_FRAME_INTERVAL_85 1U |
| 334 | * @{ |
334 | #define DCFG_FRAME_INTERVAL_90 2U |
| 335 | */ |
335 | #define DCFG_FRAME_INTERVAL_95 3U |
| 336 | #define USB_OTG_SPEED_FULL 3U |
336 | /** |
| 337 | /** |
337 | * @} |
| 338 | * @} |
338 | */ |
| 339 | */ |
339 | #endif /* defined (USB_OTG_FS) */ |
| 340 | 340 | /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS |
|
| 341 | /** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY |
341 | * @{ |
| 342 | * @{ |
342 | */ |
| 343 | */ |
343 | #define EP_MPS_64 0U |
| 344 | #define USB_OTG_ULPI_PHY 1U |
344 | #define EP_MPS_32 1U |
| 345 | #define USB_OTG_EMBEDDED_PHY 2U |
345 | #define EP_MPS_16 2U |
| 346 | /** |
346 | #define EP_MPS_8 3U |
| 347 | * @} |
347 | /** |
| 348 | */ |
348 | * @} |
| 349 | 349 | */ |
|
| 350 | /** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value |
350 | |
| 351 | * @{ |
351 | /** @defgroup USB_LL_EP_Type USB Low Layer EP Type |
| 352 | */ |
352 | * @{ |
| 353 | #ifndef USBD_FS_TRDT_VALUE |
353 | */ |
| 354 | #define USBD_FS_TRDT_VALUE 5U |
354 | #define EP_TYPE_CTRL 0U |
| 355 | #define USBD_DEFAULT_TRDT_VALUE 9U |
355 | #define EP_TYPE_ISOC 1U |
| 356 | #endif /* USBD_HS_TRDT_VALUE */ |
356 | #define EP_TYPE_BULK 2U |
| 357 | /** |
357 | #define EP_TYPE_INTR 3U |
| 358 | * @} |
358 | #define EP_TYPE_MSK 3U |
| 359 | */ |
359 | /** |
| 360 | 360 | * @} |
|
| 361 | /** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS |
361 | */ |
| 362 | * @{ |
362 | |
| 363 | */ |
363 | /** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed |
| 364 | #define USB_OTG_FS_MAX_PACKET_SIZE 64U |
364 | * @{ |
| 365 | #define USB_OTG_MAX_EP0_SIZE 64U |
365 | */ |
| 366 | /** |
366 | #define EP_SPEED_LOW 0U |
| 367 | * @} |
367 | #define EP_SPEED_FULL 1U |
| 368 | */ |
368 | #define EP_SPEED_HIGH 2U |
| 369 | 369 | /** |
|
| 370 | /** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency |
370 | * @} |
| 371 | * @{ |
371 | */ |
| 372 | */ |
372 | |
| 373 | #define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) |
373 | /** @defgroup USB_LL_CH_PID_Type USB Low Layer Channel PID Type |
| 374 | #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) |
374 | * @{ |
| 375 | #define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) |
375 | */ |
| 376 | /** |
376 | #define HC_PID_DATA0 0U |
| 377 | * @} |
377 | #define HC_PID_DATA2 1U |
| 378 | */ |
378 | #define HC_PID_DATA1 2U |
| 379 | 379 | #define HC_PID_SETUP 3U |
|
| 380 | /** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval |
380 | /** |
| 381 | * @{ |
381 | * @} |
| 382 | */ |
382 | */ |
| 383 | #define DCFG_FRAME_INTERVAL_80 0U |
383 | |
| 384 | #define DCFG_FRAME_INTERVAL_85 1U |
384 | /** @defgroup USB_LL Device Speed |
| 385 | #define DCFG_FRAME_INTERVAL_90 2U |
385 | * @{ |
| 386 | #define DCFG_FRAME_INTERVAL_95 3U |
386 | */ |
| 387 | /** |
387 | #define USBD_FS_SPEED 2U |
| 388 | * @} |
388 | #define USBH_FSLS_SPEED 1U |
| 389 | */ |
389 | /** |
| 390 | 390 | * @} |
|
| 391 | /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS |
391 | */ |
| 392 | * @{ |
392 | |
| 393 | */ |
393 | #if defined (USB_OTG_FS) |
| 394 | #define EP_MPS_64 0U |
394 | /** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines |
| 395 | #define EP_MPS_32 1U |
395 | * @{ |
| 396 | #define EP_MPS_16 2U |
396 | */ |
| 397 | #define EP_MPS_8 3U |
397 | #define STS_GOUT_NAK 1U |
| 398 | /** |
398 | #define STS_DATA_UPDT 2U |
| 399 | * @} |
399 | #define STS_XFER_COMP 3U |
| 400 | */ |
400 | #define STS_SETUP_COMP 4U |
| 401 | 401 | #define STS_SETUP_UPDT 6U |
|
| 402 | /** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed |
402 | /** |
| 403 | * @{ |
403 | * @} |
| 404 | */ |
404 | */ |
| 405 | #define EP_SPEED_LOW 0U |
405 | |
| 406 | #define EP_SPEED_FULL 1U |
406 | /** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines |
| 407 | #define EP_SPEED_HIGH 2U |
407 | * @{ |
| 408 | /** |
408 | */ |
| 409 | * @} |
409 | #define HCFG_30_60_MHZ 0U |
| 410 | */ |
410 | #define HCFG_48_MHZ 1U |
| 411 | 411 | #define HCFG_6_MHZ 2U |
|
| 412 | /** @defgroup USB_LL_EP_Type USB Low Layer EP Type |
412 | /** |
| 413 | * @{ |
413 | * @} |
| 414 | */ |
414 | */ |
| 415 | #define EP_TYPE_CTRL 0U |
415 | |
| 416 | #define EP_TYPE_ISOC 1U |
416 | /** @defgroup USB_LL_HFIR_Defines USB Low Layer frame interval Defines |
| 417 | #define EP_TYPE_BULK 2U |
417 | * @{ |
| 418 | #define EP_TYPE_INTR 3U |
418 | */ |
| 419 | #define EP_TYPE_MSK 3U |
419 | #define HFIR_6_MHZ 6000U |
| 420 | /** |
420 | #define HFIR_60_MHZ 60000U |
| 421 | * @} |
421 | #define HFIR_48_MHZ 48000U |
| 422 | */ |
422 | /** |
| 423 | 423 | * @} |
|
| 424 | /** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines |
424 | */ |
| 425 | * @{ |
425 | |
| 426 | */ |
426 | /** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines |
| 427 | #define STS_GOUT_NAK 1U |
427 | * @{ |
| 428 | #define STS_DATA_UPDT 2U |
428 | */ |
| 429 | #define STS_XFER_COMP 3U |
429 | #define HPRT0_PRTSPD_HIGH_SPEED 0U |
| 430 | #define STS_SETUP_COMP 4U |
430 | #define HPRT0_PRTSPD_FULL_SPEED 1U |
| 431 | #define STS_SETUP_UPDT 6U |
431 | #define HPRT0_PRTSPD_LOW_SPEED 2U |
| 432 | /** |
432 | /** |
| 433 | * @} |
433 | * @} |
| 434 | */ |
434 | */ |
| 435 | 435 | ||
| 436 | /** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines |
436 | #define HCCHAR_CTRL 0U |
| 437 | * @{ |
437 | #define HCCHAR_ISOC 1U |
| 438 | */ |
438 | #define HCCHAR_BULK 2U |
| 439 | #define HCFG_30_60_MHZ 0U |
439 | #define HCCHAR_INTR 3U |
| 440 | #define HCFG_48_MHZ 1U |
440 | |
| 441 | #define HCFG_6_MHZ 2U |
441 | #define GRXSTS_PKTSTS_IN 2U |
| 442 | /** |
442 | #define GRXSTS_PKTSTS_IN_XFER_COMP 3U |
| 443 | * @} |
443 | #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U |
| 444 | */ |
444 | #define GRXSTS_PKTSTS_CH_HALTED 7U |
| 445 | 445 | ||
| 446 | /** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines |
446 | #define CLEAR_INTERRUPT_MASK 0xFFFFFFFFU |
| 447 | * @{ |
447 | |
| 448 | */ |
448 | #define HC_MAX_PKT_CNT 256U |
| 449 | #define HPRT0_PRTSPD_HIGH_SPEED 0U |
449 | |
| 450 | #define HPRT0_PRTSPD_FULL_SPEED 1U |
450 | #define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) |
| 451 | #define HPRT0_PRTSPD_LOW_SPEED 2U |
451 | #define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) |
| 452 | /** |
452 | |
| 453 | * @} |
453 | #define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) |
| 454 | */ |
454 | #define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ |
| 455 | 455 | + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) |
|
| 456 | #define HCCHAR_CTRL 0U |
456 | |
| 457 | #define HCCHAR_ISOC 1U |
457 | #define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ |
| 458 | #define HCCHAR_BULK 2U |
458 | + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) |
| 459 | #define HCCHAR_INTR 3U |
459 | |
| 460 | 460 | #define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) |
|
| 461 | #define HC_PID_DATA0 0U |
461 | |
| 462 | #define HC_PID_DATA2 1U |
462 | #define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) |
| 463 | #define HC_PID_DATA1 2U |
463 | #define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ |
| 464 | #define HC_PID_SETUP 3U |
464 | + USB_OTG_HOST_CHANNEL_BASE\ |
| 465 | 465 | + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) |
|
| 466 | #define GRXSTS_PKTSTS_IN 2U |
466 | |
| 467 | #define GRXSTS_PKTSTS_IN_XFER_COMP 3U |
467 | |
| 468 | #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U |
468 | #define EP_ADDR_MSK 0xFU |
| 469 | #define GRXSTS_PKTSTS_CH_HALTED 7U |
469 | #endif /* defined (USB_OTG_FS) */ |
| 470 | 470 | ||
| 471 | #define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) |
471 | #if defined (USB) |
| 472 | #define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) |
472 | #define BTABLE_ADDRESS 0x000U |
| 473 | 473 | #define PMA_ACCESS 2U |
|
| 474 | #define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) |
474 | |
| 475 | #define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ |
475 | #ifndef USB_EP_RX_STRX |
| 476 | + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) |
476 | #define USB_EP_RX_STRX (0x3U << 12) |
| 477 | 477 | #endif /* USB_EP_RX_STRX */ |
|
| 478 | #define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ |
478 | |
| 479 | + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) |
479 | #define EP_ADDR_MSK 0x7U |
| 480 | 480 | ||
| 481 | #define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) |
481 | #ifndef USE_USB_DOUBLE_BUFFER |
| 482 | 482 | #define USE_USB_DOUBLE_BUFFER 1U |
|
| 483 | #define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) |
483 | #endif /* USE_USB_DOUBLE_BUFFER */ |
| 484 | #define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ |
484 | #endif /* defined (USB) */ |
| 485 | + USB_OTG_HOST_CHANNEL_BASE\ |
485 | |
| 486 | + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) |
486 | /** |
| 487 | 487 | * @} |
|
| 488 | #endif /* defined (USB_OTG_FS) */ |
488 | */ |
| 489 | 489 | ||
| 490 | #if defined (USB) |
490 | /* Exported macro ------------------------------------------------------------*/ |
| 491 | /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS |
491 | /** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros |
| 492 | * @{ |
492 | * @{ |
| 493 | */ |
493 | */ |
| 494 | #define EP_MPS_64 0U |
494 | #if defined (USB_OTG_FS) |
| 495 | #define EP_MPS_32 1U |
495 | #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) |
| 496 | #define EP_MPS_16 2U |
496 | #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) |
| 497 | #define EP_MPS_8 3U |
497 | |
| 498 | /** |
498 | #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) |
| 499 | * @} |
499 | #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) |
| 500 | */ |
500 | #endif /* defined (USB_OTG_FS) */ |
| 501 | 501 | /** |
|
| 502 | /** @defgroup USB_LL_EP_Type USB Low Layer EP Type |
502 | * @} |
| 503 | * @{ |
503 | */ |
| 504 | */ |
504 | |
| 505 | #define EP_TYPE_CTRL 0U |
505 | /* Exported functions --------------------------------------------------------*/ |
| 506 | #define EP_TYPE_ISOC 1U |
506 | /** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions |
| 507 | #define EP_TYPE_BULK 2U |
507 | * @{ |
| 508 | #define EP_TYPE_INTR 3U |
508 | */ |
| 509 | #define EP_TYPE_MSK 3U |
509 | #if defined (USB_OTG_FS) |
| 510 | /** |
510 | HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
| 511 | * @} |
511 | HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
| 512 | */ |
512 | HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); |
| 513 | 513 | HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); |
|
| 514 | /** @defgroup USB_LL Device Speed |
514 | HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); |
| 515 | * @{ |
515 | HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode); |
| 516 | */ |
516 | HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); |
| 517 | #define USBD_FS_SPEED 2U |
517 | HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); |
| 518 | /** |
518 | HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); |
| 519 | * @} |
519 | HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
| 520 | */ |
520 | HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
| 521 | 521 | HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
|
| 522 | #define BTABLE_ADDRESS 0x000U |
522 | HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
| 523 | #define PMA_ACCESS 2U |
523 | HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
| 524 | #endif /* defined (USB) */ |
524 | HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, |
| 525 | #if defined (USB_OTG_FS) |
525 | uint8_t ch_ep_num, uint16_t len); |
| 526 | #define EP_ADDR_MSK 0xFU |
526 | |
| 527 | #endif /* defined (USB_OTG_FS) */ |
527 | void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); |
| 528 | #if defined (USB) |
528 | HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
| 529 | #define EP_ADDR_MSK 0x7U |
529 | HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
| 530 | #endif /* defined (USB) */ |
530 | HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
| 531 | /** |
531 | HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); |
| 532 | * @} |
532 | HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); |
| 533 | */ |
533 | HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); |
| 534 | 534 | HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); |
|
| 535 | /* Exported macro ------------------------------------------------------------*/ |
535 | HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); |
| 536 | /** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros |
536 | HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); |
| 537 | * @{ |
537 | uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); |
| 538 | */ |
538 | uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); |
| 539 | #if defined (USB_OTG_FS) |
539 | uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx); |
| 540 | #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) |
540 | uint32_t USB_ReadChInterrupts(USB_OTG_GlobalTypeDef *USBx, uint8_t chnum); |
| 541 | #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) |
541 | uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx); |
| 542 | 542 | uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); |
|
| 543 | #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) |
543 | uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx); |
| 544 | #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) |
544 | uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); |
| 545 | #endif /* defined (USB_OTG_FS) */ |
545 | void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); |
| 546 | /** |
546 | |
| 547 | * @} |
547 | HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
| 548 | */ |
548 | HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq); |
| 549 | 549 | HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); |
|
| 550 | /* Exported functions --------------------------------------------------------*/ |
550 | HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state); |
| 551 | /** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions |
551 | uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx); |
| 552 | * @{ |
552 | uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx); |
| 553 | */ |
553 | HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, |
| 554 | #if defined (USB_OTG_FS) |
554 | uint8_t epnum, uint8_t dev_address, uint8_t speed, |
| 555 | HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
555 | uint8_t ep_type, uint16_t mps); |
| 556 | HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
556 | HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, |
| 557 | HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); |
557 | USB_OTG_HCTypeDef *hc); |
| 558 | HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); |
558 | |
| 559 | HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); |
559 | uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); |
| 560 | HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode); |
560 | HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); |
| 561 | HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); |
561 | HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); |
| 562 | HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); |
562 | HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); |
| 563 | HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); |
563 | HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); |
| 564 | HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
564 | HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); |
| 565 | HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
565 | #endif /* defined (USB_OTG_FS) */ |
| 566 | HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
566 | |
| 567 | HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
567 | #if defined (USB) |
| 568 | HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
568 | HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); |
| 569 | HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
569 | HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); |
| 570 | HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, |
570 | HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); |
| 571 | uint8_t ch_ep_num, uint16_t len); |
571 | HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); |
| 572 | 572 | HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode); |
|
| 573 | void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); |
573 | HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed); |
| 574 | HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
574 | |
| 575 | HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
575 | HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef const *USBx); |
| 576 | HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); |
576 | HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef const *USBx, uint32_t num); |
| 577 | HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); |
577 | |
| 578 | HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); |
578 | #if defined (HAL_PCD_MODULE_ENABLED) |
| 579 | HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); |
579 | HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
| 580 | HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); |
580 | HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
| 581 | HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); |
581 | HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
| 582 | uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); |
582 | HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
| 583 | uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); |
583 | HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
| 584 | uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx); |
584 | HAL_StatusTypeDef USB_EPStopXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
| 585 | uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx); |
585 | #endif /* defined (HAL_PCD_MODULE_ENABLED) */ |
| 586 | uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); |
586 | |
| 587 | uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx); |
587 | HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address); |
| 588 | uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); |
588 | HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx); |
| 589 | void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); |
589 | HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx); |
| 590 | 590 | HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); |
|
| 591 | HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
591 | HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); |
| 592 | HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq); |
592 | HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, |
| 593 | HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); |
593 | uint8_t ch_ep_num, uint16_t len); |
| 594 | HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state); |
594 | |
| 595 | uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx); |
595 | void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); |
| 596 | uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx); |
596 | |
| 597 | HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, |
597 | uint32_t USB_ReadInterrupts(USB_TypeDef const *USBx); |
| 598 | uint8_t epnum, uint8_t dev_address, uint8_t speed, |
598 | uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx); |
| 599 | uint8_t ep_type, uint16_t mps); |
599 | uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); |
| 600 | HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, |
600 | uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx); |
| 601 | USB_OTG_HCTypeDef *hc); |
601 | uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); |
| 602 | 602 | void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt); |
|
| 603 | uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); |
603 | HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); |
| 604 | HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); |
604 | HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); |
| 605 | HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); |
605 | |
| 606 | HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); |
606 | void USB_WritePMA(USB_TypeDef const *USBx, uint8_t *pbUsrBuf, |
| 607 | HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); |
607 | uint16_t wPMABufAddr, uint16_t wNBytes); |
| 608 | HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); |
608 | |
| 609 | #endif /* defined (USB_OTG_FS) */ |
609 | void USB_ReadPMA(USB_TypeDef const *USBx, uint8_t *pbUsrBuf, |
| 610 | 610 | uint16_t wPMABufAddr, uint16_t wNBytes); |
|
| 611 | #if defined (USB) |
611 | #endif /* defined (USB) */ |
| 612 | HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); |
612 | /** |
| 613 | HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); |
613 | * @} |
| 614 | HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); |
614 | */ |
| 615 | HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); |
615 | |
| 616 | HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode); |
616 | /** |
| 617 | HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed); |
617 | * @} |
| 618 | HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx); |
618 | */ |
| 619 | HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num); |
619 | |
| 620 | 620 | /** |
|
| 621 | #if defined (HAL_PCD_MODULE_ENABLED) |
621 | * @} |
| 622 | HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
622 | */ |
| 623 | HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
623 | |
| 624 | HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
624 | /** |
| 625 | HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
625 | * @} |
| 626 | HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
626 | */ |
| 627 | #endif |
627 | #endif /* defined (USB) || defined (USB_OTG_FS) */ |
| 628 | 628 | ||
| 629 | HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address); |
629 | #ifdef __cplusplus |
| 630 | HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx); |
630 | } |
| 631 | HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx); |
631 | #endif /* __cplusplus */ |
| 632 | HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); |
632 | |
| 633 | HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); |
633 | |
| 634 | HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, |
634 | #endif /* STM32F1xx_LL_USB_H */ |
| 635 | uint8_t ch_ep_num, uint16_t len); |
- | |
| 636 | - | ||
| 637 | void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); |
- | |
| 638 | - | ||
| 639 | uint32_t USB_ReadInterrupts(USB_TypeDef *USBx); |
- | |
| 640 | uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx); |
- | |
| 641 | uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); |
- | |
| 642 | uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx); |
- | |
| 643 | uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); |
- | |
| 644 | void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt); |
- | |
| 645 | HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); |
- | |
| 646 | HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); |
- | |
| 647 | - | ||
| 648 | void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, |
- | |
| 649 | uint16_t wPMABufAddr, uint16_t wNBytes); |
- | |
| 650 | - | ||
| 651 | void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, |
- | |
| 652 | uint16_t wPMABufAddr, uint16_t wNBytes); |
- | |
| 653 | #endif /* defined (USB) */ |
- | |
| 654 | /** |
- | |
| 655 | * @} |
- | |
| 656 | */ |
- | |
| 657 | - | ||
| 658 | /** |
- | |
| 659 | * @} |
- | |
| 660 | */ |
- | |
| 661 | - | ||
| 662 | /** |
- | |
| 663 | * @} |
- | |
| 664 | */ |
- | |
| 665 | - | ||
| 666 | /** |
- | |
| 667 | * @} |
- | |
| 668 | */ |
- | |
| 669 | #endif /* defined (USB) || defined (USB_OTG_FS) */ |
- | |
| 670 | - | ||
| 671 | #ifdef __cplusplus |
- | |
| 672 | } |
- | |
| 673 | #endif |
- | |
| 674 | - | ||
| 675 | - | ||
| 676 | #endif /* STM32F1xx_LL_USB_H */ |
- | |
| 677 | - | ||
| 678 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
- | |