WebSVN – EngineBay2 – Diff – /trunk/Drivers/CMSIS/Include/core_sc000.h

 /**************************************************************************//**
  * @file     core_sc000.h
  * @brief    CMSIS SC000 Core Peripheral Access Layer Header File
- * @version  V4.30
+ * @version  V5.0.5
- * @date     20. October 2015
+ * @date     28. May 2018
  ******************************************************************************/
+/*
-/* Copyright (c) 2009 - 2015 ARM LIMITED
+ * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
+ *
-   All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
+ *
-   - Redistributions of source code must retain the above copyright
+ * Licensed under the Apache License, Version 2.0 (the License); you may
-     notice, this list of conditions and the following disclaimer.
+ * not use this file except in compliance with the License.
-   - Redistributions in binary form must reproduce the above copyright
+ * You may obtain a copy of the License at
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
+ *
-     specific prior written permission.
+ * www.apache.org/licenses/LICENSE-2.0
-   *
+ *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * Unless required by applicable law or agreed to in writing, software
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * See the License for the specific language governing permissions and
-   POSSIBILITY OF SUCH DAMAGE.
+ * limitations under the License.
-   ---------------------------------------------------------------------------*/
+ */
 #if   defined ( __ICCARM__ )
- #pragma system_include         /* treat file as system include file for MISRA check */
+  #pragma system_include         /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#elif defined (__clang__)
   #pragma clang system_header   /* treat file as system include file */
 #endif
 #ifndef __CORE_SC000_H_GENERIC
 #define __CORE_SC000_H_GENERIC
 /**
   \ingroup SC000
   @{
  */
+#include "cmsis_version.h"
 /*  CMSIS SC000 definitions */
-#define __SC000_CMSIS_VERSION_MAIN  (0x04U)                                    /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)                /*!< \deprecated [31:16] CMSIS HAL main version */
-#define __SC000_CMSIS_VERSION_SUB   (0x1EU)                                    /*!< [15:0]  CMSIS HAL sub version */
+#define __SC000_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)                 /*!< \deprecated [15:0]  CMSIS HAL sub version */
 #define __SC000_CMSIS_VERSION       ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
-                                      __SC000_CMSIS_VERSION_SUB           )    /*!< CMSIS HAL version number */
+                                      __SC000_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */
-#define __CORTEX_SC                 (000U)                                     /*!< Cortex secure core */
-#if   defined ( __CC_ARM )
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
-  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler */
-  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler */
-  #define __STATIC_INLINE  static __inline
-#elif defined ( __GNUC__ )
-  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler */
-  #define __STATIC_INLINE  static inline
-#elif defined ( __ICCARM__ )
-  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-  #define __STATIC_INLINE  static inline
-#elif defined ( __TMS470__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler */
-  #define __STATIC_INLINE  static inline
-#elif defined ( __TASKING__ )
-  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler */
-  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler */
-  #define __STATIC_INLINE  static inline
-#elif defined ( __CSMC__ )
-  #define __packed
-  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler */
+#define __CORTEX_SC                 (000U)                                   /*!< Cortex secure core */
-  #define __INLINE         inline                                    /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
-  #define __STATIC_INLINE  static inline
-#else
-  #error Unknown compiler
-#endif
 /** __FPU_USED indicates whether an FPU is used or not.
     This core does not support an FPU at all
 */
 #define __FPU_USED       0U
 #if defined ( __CC_ARM )
   #if defined __TARGET_FPU_VFP
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
   #if defined __ARM_PCS_VFP
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 #elif defined ( __GNUC__ )
 #elif defined ( __ICCARM__ )
   #if defined __ARMVFP__
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
-#elif defined ( __TMS470__ )
+#elif defined ( __TI_ARM__ )
   #if defined __TI_VFP_SUPPORT__
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 #elif defined ( __TASKING__ )
     #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
   #endif
 #endif
-#include "core_cmInstr.h"                /* Core Instruction Access */
+#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */
-#include "core_cmFunc.h"                 /* Core Function Access */
 #ifdef __cplusplus
+}
 #endif
 #define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */
 #define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
 /*@} end of group CMSIS_SysTick */
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
 /**
   \ingroup  CMSIS_core_register
   \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
   \brief    Type definitions for the Memory Protection Unit (MPU)
   @{
  */
 /**
   \brief   Mask and shift a bit field value for use in a register bit range.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of the bit field.
+  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted value.
 */
-#define _VAL2FLD(field, value)    ((value << field ## _Pos) & field ## _Msk)
+#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
 /**
   \brief     Mask and shift a register value to extract a bit filed value.
   \param[in] field  Name of the register bit field.
-  \param[in] value  Value of register.
+  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.
   \return           Masked and shifted bit field value.
 */
-#define _FLD2VAL(field, value)    ((value & field ## _Msk) >> field ## _Pos)
+#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
 /*@} end of group CMSIS_core_bitfield */
 /**
   \defgroup   CMSIS_core_base     Core Definitions
   \brief      Definitions for base addresses, unions, and structures.
   @{
  */
-/* Memory mapping of SC000 Hardware */
+/* Memory mapping of Core Hardware */
 #define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
 #define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */
 #define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */
 #define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
 #define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
 #define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */
 #define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */
 #define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */
-#if (__MPU_PRESENT == 1U)
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
   #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit */
   #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit */
 #endif
 /*@} */
   \defgroup CMSIS_Core_NVICFunctions NVIC Functions
   \brief    Functions that manage interrupts and exceptions via the NVIC.
   @{
  */
+#ifdef CMSIS_NVIC_VIRTUAL
+  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
+    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
+  #endif
+  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE
+#else
+/*#define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping   not available for SC000 */
+/*#define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping   not available for SC000 */
+  #define NVIC_EnableIRQ              __NVIC_EnableIRQ
+  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ
+  #define NVIC_DisableIRQ             __NVIC_DisableIRQ
+  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ
+  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ
+  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ
+/*#define NVIC_GetActive              __NVIC_GetActive             not available for SC000 */
+  #define NVIC_SetPriority            __NVIC_SetPriority
+  #define NVIC_GetPriority            __NVIC_GetPriority
+  #define NVIC_SystemReset            __NVIC_SystemReset
+#endif /* CMSIS_NVIC_VIRTUAL */
+#ifdef CMSIS_VECTAB_VIRTUAL
+  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
+  #endif
+  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
+#else
+  #define NVIC_SetVector              __NVIC_SetVector
+  #define NVIC_GetVector              __NVIC_GetVector
+#endif  /* (CMSIS_VECTAB_VIRTUAL) */
+#define NVIC_USER_IRQ_OFFSET          16
+/* The following EXC_RETURN values are saved the LR on exception entry */
+#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */
+#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */
+#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */
-/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* Interrupt Priorities are WORD accessible only under Armv6-M                  */
 /* The following MACROS handle generation of the register offset and byte masks */
 #define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
 #define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
 #define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
 /**
-  \brief   Enable External Interrupt
+  \brief   Enable Interrupt
-  \details Enables a device-specific interrupt in the NVIC interrupt controller.
+  \details Enables a device specific interrupt in the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
-  NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
 /**
-  \brief   Disable External Interrupt
+  \brief   Get Interrupt Enable status
-  \details Disables a device-specific interrupt in the NVIC interrupt controller.
+  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \param [in]      IRQn  Device specific interrupt number.
+  \return             0  Interrupt is not enabled.
+  \return             1  Interrupt is enabled.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
+    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
+/**
+  \brief   Disable Interrupt
+  \details Disables a device specific interrupt in the NVIC interrupt controller.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
+ */
+__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
-  NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+    __DSB();
+    __ISB();
+  }
+}
 /**
   \brief   Get Pending Interrupt
-  \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
+  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
-  \param [in]      IRQn  Interrupt number.
+  \param [in]      IRQn  Device specific interrupt number.
   \return             0  Interrupt status is not pending.
   \return             1  Interrupt status is pending.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
-  return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+  }
+  else
+  {
+    return(0U);
+  }
+}
 /**
   \brief   Set Pending Interrupt
-  \details Sets the pending bit of an external interrupt.
+  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.
-  \param [in]      IRQn  Interrupt number. Value cannot be negative.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
-  NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
 /**
   \brief   Clear Pending Interrupt
-  \details Clears the pending bit of an external interrupt.
+  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.
-  \param [in]      IRQn  External interrupt number. Value cannot be negative.
+  \param [in]      IRQn  Device specific interrupt number.
+  \note    IRQn must not be negative.
  */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if ((int32_t)(IRQn) >= 0)
+  {
-  NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
+  }
+}
 /**
   \brief   Set Interrupt Priority
-  \details Sets the priority of an interrupt.
+  \details Sets the priority of a device specific interrupt or a processor exception.
-  \note    The priority cannot be set for every core interrupt.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
   \param [in]      IRQn  Interrupt number.
   \param [in]  priority  Priority to set.
+  \note    The priority cannot be set for every processor exception.
  */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
+  {
-    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
        (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
   else
+  {
-    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
        (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
 /**
   \brief   Get Interrupt Priority
-  \details Reads the priority of an interrupt.
+  \details Reads the priority of a device specific interrupt or a processor exception.
-           The interrupt number can be positive to specify an external (device specific) interrupt,
+           The interrupt number can be positive to specify a device specific interrupt,
-           or negative to specify an internal (core) interrupt.
+           or negative to specify a processor exception.
   \param [in]   IRQn  Interrupt number.
   \return             Interrupt Priority.
                       Value is aligned automatically to the implemented priority bits of the microcontroller.
  */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
+{
-  if ((int32_t)(IRQn) < 0)
+  if ((int32_t)(IRQn) >= 0)
+  {
-    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
   else
+  {
-    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
+  }
+}
 /**
+  \brief   Set Interrupt Vector
+  \details Sets an interrupt vector in SRAM based interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+           VTOR must been relocated to SRAM before.
+  \param [in]   IRQn      Interrupt number
+  \param [in]   vector    Address of interrupt handler function
+ */
+__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+/**
+  \brief   Get Interrupt Vector
+  \details Reads an interrupt vector from interrupt vector table.
+           The interrupt number can be positive to specify a device specific interrupt,
+           or negative to specify a processor exception.
+  \param [in]   IRQn      Interrupt number.
+  \return                 Address of interrupt handler function
+ */
+__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
+{
+  uint32_t *vectors = (uint32_t *)SCB->VTOR;
+  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
+}
+/**
   \brief   System Reset
   \details Initiates a system reset request to reset the MCU.
  */
-__STATIC_INLINE void NVIC_SystemReset(void)
+__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
+{
   __DSB();                                                          /* Ensure all outstanding memory accesses included
                                                                        buffered write are completed before reset */
   SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
                  SCB_AIRCR_SYSRESETREQ_Msk);
+}
 /*@} end of CMSIS_Core_NVICFunctions */
+/* ##########################  FPU functions  #################################### */
+/**
+  \ingroup  CMSIS_Core_FunctionInterface
+  \defgroup CMSIS_Core_FpuFunctions FPU Functions
+  \brief    Function that provides FPU type.
+  @{
+ */
+/**
+  \brief   get FPU type
+  \details returns the FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+    return 0U;           /* No FPU */
+}
+/*@} end of CMSIS_Core_FpuFunctions */
 /* ##################################    SysTick function  ############################################ */
 /**
   \ingroup  CMSIS_Core_FunctionInterface
   \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
   \brief    Functions that configure the System.
   @{
  */
-#if (__Vendor_SysTickConfig == 0U)
+#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
 /**
   \brief   System Tick Configuration
   \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
            Counter is in free running mode to generate periodic interrupts.

Subversion Repositories EngineBay2

(root)/trunk/Drivers/CMSIS/Include/core_sc000.h – Rev 2 → 28