WebSVN – canSerial – Diff – /trunk/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103xg.s

 /**
   *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
   * @file      startup_stm32f103xb.s
   * @author    MCD Application Team
   * @brief     STM32F103xB Devices vector table for Atollic toolchain.
   *            This module performs:
   *                - Set the initial SP
   *                - Set the initial PC == Reset_Handler,
   *                - Set the vector table entries with the exceptions ISR address
   *                - Configure the clock system
   *                - Branches to main in the C library (which eventually
   *                  calls main()).
   *            After Reset the Cortex-M3 processor is in Thread mode,
   *            priority is Privileged, and the Stack is set to Main.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * Copyright (c) 2017-2021 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
+  * This software is licensed under terms that can be found in the LICENSE file
-  * the "License"; You may not use this file except in compliance with the
+  * in the root directory of this software component.
-  * License. You may obtain a copy of the License at:
+  * If no LICENSE file comes with this software, it is provided AS-IS.
-  *                        opensource.org/licenses/BSD-3-Clause
+  *
-  *
+  ******************************************************************************
-  ******************************************************************************
+  */
-  */
+  .syntax unified
-  .syntax unified
+  .cpu cortex-m3
-  .cpu cortex-m3
+  .fpu softvfp
-  .fpu softvfp
+  .thumb
-  .thumb
+.global g_pfnVectors
-.global g_pfnVectors
+.global Default_Handler
-.global Default_Handler
+/* start address for the initialization values of the .data section.
-/* start address for the initialization values of the .data section.
+defined in linker script */
-defined in linker script */
+.word _sidata
-.word _sidata
+/* start address for the .data section. defined in linker script */
-/* start address for the .data section. defined in linker script */
+.word _sdata
-.word _sdata
+/* end address for the .data section. defined in linker script */
-/* end address for the .data section. defined in linker script */
+.word _edata
-.word _edata
+/* start address for the .bss section. defined in linker script */
-/* start address for the .bss section. defined in linker script */
+.word _sbss
-.word _sbss
+/* end address for the .bss section. defined in linker script */
-/* end address for the .bss section. defined in linker script */
+.word _ebss
-.word _ebss
+.equ  BootRAM,        0xF1E0F85F
-.equ  BootRAM,        0xF1E0F85F
+/**
-/**
+ * @brief  This is the code that gets called when the processor first
- * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
- *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
- *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
- *          supplied main() routine is called.
+ * @param  None
- * @param  None
+ * @retval : None
- * @retval : None
+*/
-*/
+  .section .text.Reset_Handler
-  .section .text.Reset_Handler
+  .weak Reset_Handler
-  .weak Reset_Handler
+  .type Reset_Handler, %function
-  .type Reset_Handler, %function
+Reset_Handler:
-Reset_Handler:
+/* Call the clock system initialization function.*/
-/* Copy the data segment initializers from flash to SRAM */
+    bl  SystemInit
-  ldr r0, =_sdata
-  ldr r1, =_edata
+/* Copy the data segment initializers from flash to SRAM */
-  ldr r2, =_sidata
+  ldr r0, =_sdata
-  movs r3, #0
+  ldr r1, =_edata
-  b LoopCopyDataInit
+  ldr r2, =_sidata
+  movs r3, #0
-CopyDataInit:
+  b LoopCopyDataInit
-  ldr r4, [r2, r3]
-  str r4, [r0, r3]
+CopyDataInit:
-  adds r3, r3, #4
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
-LoopCopyDataInit:
+  adds r3, r3, #4
-  adds r4, r0, r3
-  cmp r4, r1
+LoopCopyDataInit:
-  bcc CopyDataInit
+  adds r4, r0, r3
+  cmp r4, r1
-/* Zero fill the bss segment. */
+  bcc CopyDataInit
-  ldr r2, =_sbss
-  ldr r4, =_ebss
+/* Zero fill the bss segment. */
-  movs r3, #0
+  ldr r2, =_sbss
-  b LoopFillZerobss
+  ldr r4, =_ebss
+  movs r3, #0
-FillZerobss:
+  b LoopFillZerobss
-  str  r3, [r2]
-  adds r2, r2, #4
+FillZerobss:
+  str  r3, [r2]
-LoopFillZerobss:
+  adds r2, r2, #4
-  cmp r2, r4
-  bcc FillZerobss
+LoopFillZerobss:
+  cmp r2, r4
-/* Call the clock system intitialization function.*/
+  bcc FillZerobss
-    bl  SystemInit
 /* Call static constructors */
     bl __libc_init_array
 /* Call the application's entry point.*/
   bl main
   bx lr
 .size Reset_Handler, .-Reset_Handler
 /**
  * @brief  This is the code that gets called when the processor receives an
  *         unexpected interrupt.  This simply enters an infinite loop, preserving
  *         the system state for examination by a debugger.
  * @param  None
  * @retval None
 */
     .section .text.Default_Handler,"ax",%progbits
 Default_Handler:
 Infinite_Loop:
   b Infinite_Loop
   .size Default_Handler, .-Default_Handler
 /******************************************************************************
 *
 * The minimal vector table for a Cortex M3.  Note that the proper constructs
 * must be placed on this to ensure that it ends up at physical address
 * 0x0000.0000.
 *
 *******************************************************************************/
   .section .isr_vector,"a",%progbits
   .type g_pfnVectors, %object
   .size g_pfnVectors, .-g_pfnVectors
 g_pfnVectors:
   .word  _estack
   .word  Reset_Handler
   .word  NMI_Handler
   .word  HardFault_Handler
   .word  MemManage_Handler
   .word  BusFault_Handler
   .word  UsageFault_Handler
   .word  0
   .word  0
   .word  0
   .word  0
   .word  SVC_Handler
   .word  DebugMon_Handler
   .word  0
   .word  PendSV_Handler
   .word  SysTick_Handler
   .word  WWDG_IRQHandler
   .word  PVD_IRQHandler
   .word  TAMPER_IRQHandler
   .word  RTC_IRQHandler
   .word  FLASH_IRQHandler
   .word  RCC_IRQHandler
   .word  EXTI0_IRQHandler
   .word  EXTI1_IRQHandler
   .word  EXTI2_IRQHandler
   .word  EXTI3_IRQHandler
   .word  EXTI4_IRQHandler
   .word  DMA1_Channel1_IRQHandler
   .word  DMA1_Channel2_IRQHandler
   .word  DMA1_Channel3_IRQHandler
   .word  DMA1_Channel4_IRQHandler
   .word  DMA1_Channel5_IRQHandler
   .word  DMA1_Channel6_IRQHandler
   .word  DMA1_Channel7_IRQHandler
   .word  ADC1_2_IRQHandler
   .word  USB_HP_CAN1_TX_IRQHandler
   .word  USB_LP_CAN1_RX0_IRQHandler
   .word  CAN1_RX1_IRQHandler
   .word  CAN1_SCE_IRQHandler
   .word  EXTI9_5_IRQHandler
   .word  TIM1_BRK_TIM9_IRQHandler
   .word  TIM1_UP_TIM10_IRQHandler
   .word  TIM1_TRG_COM_TIM11_IRQHandler
   .word  TIM1_CC_IRQHandler
   .word  TIM2_IRQHandler
   .word  TIM3_IRQHandler
   .word  TIM4_IRQHandler
   .word  I2C1_EV_IRQHandler
   .word  I2C1_ER_IRQHandler
   .word  I2C2_EV_IRQHandler
   .word  I2C2_ER_IRQHandler
   .word  SPI1_IRQHandler
   .word  SPI2_IRQHandler
   .word  USART1_IRQHandler
   .word  USART2_IRQHandler
   .word  USART3_IRQHandler
   .word  EXTI15_10_IRQHandler
   .word  RTC_Alarm_IRQHandler
   .word  USBWakeUp_IRQHandler
   .word  TIM8_BRK_TIM12_IRQHandler
   .word  TIM8_UP_TIM13_IRQHandler
   .word  TIM8_TRG_COM_TIM14_IRQHandler
   .word  TIM8_CC_IRQHandler
   .word  ADC3_IRQHandler
   .word  FSMC_IRQHandler
   .word  SDIO_IRQHandler
   .word  TIM5_IRQHandler
   .word  SPI3_IRQHandler
   .word  UART4_IRQHandler
   .word  UART5_IRQHandler
   .word  TIM6_IRQHandler
   .word  TIM7_IRQHandler
   .word  DMA2_Channel1_IRQHandler
   .word  DMA2_Channel2_IRQHandler
   .word  DMA2_Channel3_IRQHandler
   .word  DMA2_Channel4_5_IRQHandler
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  0
   .word  BootRAM       /* @0x1E0. This is for boot in RAM mode for
                          STM32F10x XL-Density devices. */
 /*******************************************************************************
 *
 * Provide weak aliases for each Exception handler to the Default_Handler.
 * As they are weak aliases, any function with the same name will override
 * this definition.
 *
 *******************************************************************************/
   .weak  NMI_Handler
   .thumb_set NMI_Handler,Default_Handler
   .weak  HardFault_Handler
   .thumb_set HardFault_Handler,Default_Handler
   .weak  MemManage_Handler
   .thumb_set MemManage_Handler,Default_Handler
   .weak  BusFault_Handler
   .thumb_set BusFault_Handler,Default_Handler
   .weak  UsageFault_Handler
   .thumb_set UsageFault_Handler,Default_Handler
   .weak  SVC_Handler
   .thumb_set SVC_Handler,Default_Handler
   .weak  DebugMon_Handler
   .thumb_set DebugMon_Handler,Default_Handler
   .weak  PendSV_Handler
   .thumb_set PendSV_Handler,Default_Handler
   .weak  SysTick_Handler
   .thumb_set SysTick_Handler,Default_Handler
   .weak  WWDG_IRQHandler
   .thumb_set WWDG_IRQHandler,Default_Handler
   .weak  PVD_IRQHandler
   .thumb_set PVD_IRQHandler,Default_Handler
   .weak  TAMPER_IRQHandler
   .thumb_set TAMPER_IRQHandler,Default_Handler
   .weak  RTC_IRQHandler
   .thumb_set RTC_IRQHandler,Default_Handler
   .weak  FLASH_IRQHandler
   .thumb_set FLASH_IRQHandler,Default_Handler
   .weak  RCC_IRQHandler
   .thumb_set RCC_IRQHandler,Default_Handler
   .weak  EXTI0_IRQHandler
   .thumb_set EXTI0_IRQHandler,Default_Handler
   .weak  EXTI1_IRQHandler
   .thumb_set EXTI1_IRQHandler,Default_Handler
   .weak  EXTI2_IRQHandler
   .thumb_set EXTI2_IRQHandler,Default_Handler
   .weak  EXTI3_IRQHandler
   .thumb_set EXTI3_IRQHandler,Default_Handler
   .weak  EXTI4_IRQHandler
   .thumb_set EXTI4_IRQHandler,Default_Handler
   .weak  DMA1_Channel1_IRQHandler
   .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
   .weak  DMA1_Channel2_IRQHandler
   .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
   .weak  DMA1_Channel3_IRQHandler
   .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
   .weak  DMA1_Channel4_IRQHandler
   .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
   .weak  DMA1_Channel5_IRQHandler
   .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
   .weak  DMA1_Channel6_IRQHandler
   .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
   .weak  DMA1_Channel7_IRQHandler
   .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
   .weak  ADC1_2_IRQHandler
   .thumb_set ADC1_2_IRQHandler,Default_Handler
   .weak  USB_HP_CAN1_TX_IRQHandler
   .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
   .weak  USB_LP_CAN1_RX0_IRQHandler
   .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
   .weak  CAN1_RX1_IRQHandler
   .thumb_set CAN1_RX1_IRQHandler,Default_Handler
   .weak  CAN1_SCE_IRQHandler
   .thumb_set CAN1_SCE_IRQHandler,Default_Handler
   .weak  EXTI9_5_IRQHandler
   .thumb_set EXTI9_5_IRQHandler,Default_Handler
   .weak  TIM1_BRK_TIM9_IRQHandler
   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
   .weak  TIM1_UP_TIM10_IRQHandler
   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
   .weak  TIM1_TRG_COM_TIM11_IRQHandler
   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
   .weak  TIM1_CC_IRQHandler
   .thumb_set TIM1_CC_IRQHandler,Default_Handler
   .weak  TIM2_IRQHandler
   .thumb_set TIM2_IRQHandler,Default_Handler
   .weak  TIM3_IRQHandler
   .thumb_set TIM3_IRQHandler,Default_Handler
   .weak  TIM4_IRQHandler
   .thumb_set TIM4_IRQHandler,Default_Handler
   .weak  I2C1_EV_IRQHandler
   .thumb_set I2C1_EV_IRQHandler,Default_Handler
   .weak  I2C1_ER_IRQHandler
   .thumb_set I2C1_ER_IRQHandler,Default_Handler
   .weak  I2C2_EV_IRQHandler
   .thumb_set I2C2_EV_IRQHandler,Default_Handler
   .weak  I2C2_ER_IRQHandler
   .thumb_set I2C2_ER_IRQHandler,Default_Handler
   .weak  SPI1_IRQHandler
   .thumb_set SPI1_IRQHandler,Default_Handler
   .weak  SPI2_IRQHandler
   .thumb_set SPI2_IRQHandler,Default_Handler
   .weak  USART1_IRQHandler
   .thumb_set USART1_IRQHandler,Default_Handler
   .weak  USART2_IRQHandler
   .thumb_set USART2_IRQHandler,Default_Handler
   .weak  USART3_IRQHandler
   .thumb_set USART3_IRQHandler,Default_Handler
   .weak  EXTI15_10_IRQHandler
   .thumb_set EXTI15_10_IRQHandler,Default_Handler
   .weak  RTC_Alarm_IRQHandler
   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
   .weak  USBWakeUp_IRQHandler
   .thumb_set USBWakeUp_IRQHandler,Default_Handler
   .weak  TIM8_BRK_TIM12_IRQHandler
   .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
   .weak  TIM8_UP_TIM13_IRQHandler
   .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
   .weak  TIM8_TRG_COM_TIM14_IRQHandler
   .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
   .weak  TIM8_CC_IRQHandler
   .thumb_set TIM8_CC_IRQHandler,Default_Handler
   .weak  ADC3_IRQHandler
   .thumb_set ADC3_IRQHandler,Default_Handler
   .weak  FSMC_IRQHandler
   .thumb_set FSMC_IRQHandler,Default_Handler
   .weak  SDIO_IRQHandler
   .thumb_set SDIO_IRQHandler,Default_Handler
   .weak  TIM5_IRQHandler
   .thumb_set TIM5_IRQHandler,Default_Handler
   .weak  SPI3_IRQHandler
   .thumb_set SPI3_IRQHandler,Default_Handler
   .weak  UART4_IRQHandler
   .thumb_set UART4_IRQHandler,Default_Handler
   .weak  UART5_IRQHandler
   .thumb_set UART5_IRQHandler,Default_Handler
   .weak  TIM6_IRQHandler
   .thumb_set TIM6_IRQHandler,Default_Handler
   .weak  TIM7_IRQHandler
   .thumb_set TIM7_IRQHandler,Default_Handler
   .weak  DMA2_Channel1_IRQHandler
   .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
   .weak  DMA2_Channel2_IRQHandler
   .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
   .weak  DMA2_Channel3_IRQHandler
   .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
   .weak  DMA2_Channel4_5_IRQHandler
   .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Subversion Repositories canSerial

(root)/trunk/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103xg.s – Rev 2 → 3