Rev 61 | Show entire file | Ignore whitespace | Details | Blame | Last modification | View Log | RSS feed
| Rev 61 | Rev 77 | ||
|---|---|---|---|
| Line 1... | Line 1... | ||
| 1 | /** |
1 | /** |
| 2 | ****************************************************************************** |
2 | ****************************************************************************** |
| 3 | * @file stm32l1xx_hal_smartcard.h |
3 | * @file stm32l1xx_hal_smartcard.h |
| 4 | * @author MCD Application Team |
4 | * @author MCD Application Team |
| 5 | * @brief Header file of SMARTCARD HAL module. |
5 | * @brief Header file of SMARTCARD HAL module. |
| 6 | ****************************************************************************** |
6 | ****************************************************************************** |
| 7 | * @attention |
7 | * @attention |
| 8 | * |
8 | * |
| 9 | * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
9 | * Copyright (c) 2016 STMicroelectronics. |
| 10 | * All rights reserved.</center></h2> |
10 | * All rights reserved. |
| 11 | * |
11 | * |
| 12 | * This software component is licensed by ST under BSD 3-Clause license, |
12 | * This software is licensed under terms that can be found in the LICENSE file |
| 13 | * the "License"; You may not use this file except in compliance with the |
13 | * in the root directory of this software component. |
| 14 | * License. You may obtain a copy of the License at: |
14 | * If no LICENSE file comes with this software, it is provided AS-IS. |
| 15 | * opensource.org/licenses/BSD-3-Clause |
15 | * |
| 16 | * |
16 | ****************************************************************************** |
| 17 | ****************************************************************************** |
17 | */ |
| 18 | */ |
18 | |
| 19 | 19 | /* Define to prevent recursive inclusion -------------------------------------*/ |
|
| 20 | /* Define to prevent recursive inclusion -------------------------------------*/ |
20 | #ifndef __STM32L1xx_HAL_SMARTCARD_H |
| 21 | #ifndef __STM32L1xx_HAL_SMARTCARD_H |
21 | #define __STM32L1xx_HAL_SMARTCARD_H |
| 22 | #define __STM32L1xx_HAL_SMARTCARD_H |
22 | |
| 23 | 23 | #ifdef __cplusplus |
|
| 24 | #ifdef __cplusplus |
24 | extern "C" { |
| 25 | extern "C" { |
25 | #endif |
| 26 | #endif |
26 | |
| 27 | 27 | /* Includes ------------------------------------------------------------------*/ |
|
| 28 | /* Includes ------------------------------------------------------------------*/ |
28 | #include "stm32l1xx_hal_def.h" |
| 29 | #include "stm32l1xx_hal_def.h" |
29 | |
| 30 | 30 | /** @addtogroup STM32L1xx_HAL_Driver |
|
| 31 | /** @addtogroup STM32L1xx_HAL_Driver |
31 | * @{ |
| 32 | * @{ |
32 | */ |
| 33 | */ |
33 | |
| 34 | 34 | /** @addtogroup SMARTCARD |
|
| 35 | /** @addtogroup SMARTCARD |
35 | * @{ |
| 36 | * @{ |
36 | */ |
| 37 | */ |
37 | |
| 38 | 38 | /* Exported types ------------------------------------------------------------*/ |
|
| 39 | /* Exported types ------------------------------------------------------------*/ |
39 | /** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types |
| 40 | /** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types |
40 | * @{ |
| 41 | * @{ |
41 | */ |
| 42 | */ |
42 | |
| 43 | 43 | /** |
|
| 44 | /** |
44 | * @brief SMARTCARD Init Structure definition |
| 45 | * @brief SMARTCARD Init Structure definition |
45 | */ |
| 46 | */ |
46 | typedef struct |
| 47 | typedef struct |
47 | { |
| 48 | { |
48 | uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate. |
| 49 | uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate. |
49 | The baud rate is computed using the following formula: |
| 50 | The baud rate is computed using the following formula: |
50 | - IntegerDivider = ((PCLKx) / (16 * (hsc->Init.BaudRate))) |
| 51 | - IntegerDivider = ((PCLKx) / (16 * (hsc->Init.BaudRate))) |
51 | - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ |
| 52 | - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ |
52 | |
| 53 | 53 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
|
| 54 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
54 | This parameter can be a value of @ref SMARTCARD_Word_Length */ |
| 55 | This parameter can be a value of @ref SMARTCARD_Word_Length */ |
55 | |
| 56 | 56 | uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. |
|
| 57 | uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. |
57 | This parameter can be a value of @ref SMARTCARD_Stop_Bits */ |
| 58 | This parameter can be a value of @ref SMARTCARD_Stop_Bits */ |
58 | |
| 59 | 59 | uint32_t Parity; /*!< Specifies the parity mode. |
|
| 60 | uint32_t Parity; /*!< Specifies the parity mode. |
60 | This parameter can be a value of @ref SMARTCARD_Parity |
| 61 | This parameter can be a value of @ref SMARTCARD_Parity |
61 | @note When parity is enabled, the computed parity is inserted |
| 62 | @note When parity is enabled, the computed parity is inserted |
62 | at the MSB position of the transmitted data (9th bit when |
| 63 | at the MSB position of the transmitted data (9th bit when |
63 | the word length is set to 9 data bits; 8th bit when the |
| 64 | the word length is set to 9 data bits; 8th bit when the |
64 | word length is set to 8 data bits).*/ |
| 65 | word length is set to 8 data bits).*/ |
65 | |
| 66 | 66 | uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. |
|
| 67 | uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. |
67 | This parameter can be a value of @ref SMARTCARD_Mode */ |
| 68 | This parameter can be a value of @ref SMARTCARD_Mode */ |
68 | |
| 69 | 69 | uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. |
|
| 70 | uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. |
70 | This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ |
| 71 | This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ |
71 | |
| 72 | 72 | uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. |
|
| 73 | uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. |
73 | This parameter can be a value of @ref SMARTCARD_Clock_Phase */ |
| 74 | This parameter can be a value of @ref SMARTCARD_Clock_Phase */ |
74 | |
| 75 | 75 | uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted |
|
| 76 | uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted |
76 | data bit (MSB) has to be output on the SCLK pin in synchronous mode. |
| 77 | data bit (MSB) has to be output on the SCLK pin in synchronous mode. |
77 | This parameter can be a value of @ref SMARTCARD_Last_Bit */ |
| 78 | This parameter can be a value of @ref SMARTCARD_Last_Bit */ |
78 | |
| 79 | 79 | uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock |
|
| 80 | uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock |
80 | to provide the smartcard clock. The value given in the register (5 significant bits) |
| 81 | to provide the smartcard clock. The value given in the register (5 significant bits) |
81 | is multiplied by 2 to give the division factor of the source clock frequency. |
| 82 | is multiplied by 2 to give the division factor of the source clock frequency. |
82 | This parameter can be a value of @ref SMARTCARD_Prescaler */ |
| 83 | This parameter can be a value of @ref SMARTCARD_Prescaler */ |
83 | |
| 84 | 84 | uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks */ |
|
| 85 | uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks */ |
85 | |
| 86 | 86 | uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state. |
|
| 87 | uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state. |
87 | This parameter can be a value of @ref SMARTCARD_NACK_State */ |
| 88 | This parameter can be a value of @ref SMARTCARD_NACK_State */ |
88 | }SMARTCARD_InitTypeDef; |
| 89 | }SMARTCARD_InitTypeDef; |
89 | |
| 90 | 90 | /** |
|
| 91 | /** |
91 | * @brief HAL SMARTCARD State structures definition |
| 92 | * @brief HAL SMARTCARD State structures definition |
92 | * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState. |
| 93 | * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState. |
93 | * - gState contains SMARTCARD state information related to global Handle management |
| 94 | * - gState contains SMARTCARD state information related to global Handle management |
94 | * and also information related to Tx operations. |
| 95 | * and also information related to Tx operations. |
95 | * gState value coding follow below described bitmap : |
| 96 | * gState value coding follow below described bitmap : |
96 | * b7-b6 Error information |
| 97 | * b7-b6 Error information |
97 | * 00 : No Error |
| 98 | * 00 : No Error |
98 | * 01 : (Not Used) |
| 99 | * 01 : (Not Used) |
99 | * 10 : Timeout |
| 100 | * 10 : Timeout |
100 | * 11 : Error |
| 101 | * 11 : Error |
101 | * b5 IP initialization status |
| 102 | * b5 IP initialization status |
102 | * 0 : Reset (IP not initialized) |
| 103 | * 0 : Reset (IP not initialized) |
103 | * 1 : Init done (IP initialized. HAL SMARTCARD Init function already called) |
| 104 | * 1 : Init done (IP initialized. HAL SMARTCARD Init function already called) |
104 | * b4-b3 (not used) |
| 105 | * b4-b3 (not used) |
105 | * xx : Should be set to 00 |
| 106 | * xx : Should be set to 00 |
106 | * b2 Intrinsic process state |
| 107 | * b2 Intrinsic process state |
107 | * 0 : Ready |
| 108 | * 0 : Ready |
108 | * 1 : Busy (IP busy with some configuration or internal operations) |
| 109 | * 1 : Busy (IP busy with some configuration or internal operations) |
109 | * b1 (not used) |
| 110 | * b1 (not used) |
110 | * x : Should be set to 0 |
| 111 | * x : Should be set to 0 |
111 | * b0 Tx state |
| 112 | * b0 Tx state |
112 | * 0 : Ready (no Tx operation ongoing) |
| 113 | * 0 : Ready (no Tx operation ongoing) |
113 | * 1 : Busy (Tx operation ongoing) |
| 114 | * 1 : Busy (Tx operation ongoing) |
114 | * - RxState contains information related to Rx operations. |
| 115 | * - RxState contains information related to Rx operations. |
115 | * RxState value coding follow below described bitmap : |
| 116 | * RxState value coding follow below described bitmap : |
116 | * b7-b6 (not used) |
| 117 | * b7-b6 (not used) |
117 | * xx : Should be set to 00 |
| 118 | * xx : Should be set to 00 |
118 | * b5 IP initialization status |
| 119 | * b5 IP initialization status |
119 | * 0 : Reset (IP not initialized) |
| 120 | * 0 : Reset (IP not initialized) |
120 | * 1 : Init done (IP initialized) |
| 121 | * 1 : Init done (IP initialized) |
121 | * b4-b2 (not used) |
| 122 | * b4-b2 (not used) |
122 | * xxx : Should be set to 000 |
| 123 | * xxx : Should be set to 000 |
123 | * b1 Rx state |
| 124 | * b1 Rx state |
124 | * 0 : Ready (no Rx operation ongoing) |
| 125 | * 0 : Ready (no Rx operation ongoing) |
125 | * 1 : Busy (Rx operation ongoing) |
| 126 | * 1 : Busy (Rx operation ongoing) |
126 | * b0 (not used) |
| 127 | * b0 (not used) |
127 | * x : Should be set to 0. |
| 128 | * x : Should be set to 0. |
128 | */ |
| 129 | */ |
129 | typedef enum |
| 130 | typedef enum |
130 | { |
| 131 | { |
131 | HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized |
| 132 | HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized |
132 | Value is allowed for gState and RxState */ |
| 133 | Value is allowed for gState and RxState */ |
133 | HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use |
| 134 | HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use |
134 | Value is allowed for gState and RxState */ |
| 135 | Value is allowed for gState and RxState */ |
135 | HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing |
| 136 | HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing |
136 | Value is allowed for gState only */ |
| 137 | Value is allowed for gState only */ |
137 | HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing |
| 138 | HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing |
138 | Value is allowed for gState only */ |
| 139 | Value is allowed for gState only */ |
139 | HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing |
| 140 | HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing |
140 | Value is allowed for RxState only */ |
| 141 | Value is allowed for RxState only */ |
141 | HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing |
| 142 | HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing |
142 | Not to be used for neither gState nor RxState. |
| 143 | Not to be used for neither gState nor RxState. |
143 | Value is result of combination (Or) between gState and RxState values */ |
| 144 | Value is result of combination (Or) between gState and RxState values */ |
144 | HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state |
| 145 | HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state |
145 | Value is allowed for gState only */ |
| 146 | Value is allowed for gState only */ |
146 | HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error |
| 147 | HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error |
147 | Value is allowed for gState only */ |
| 148 | Value is allowed for gState only */ |
148 | }HAL_SMARTCARD_StateTypeDef; |
| 149 | }HAL_SMARTCARD_StateTypeDef; |
149 | |
| 150 | 150 | /** |
|
| 151 | /** |
151 | * @brief SMARTCARD handle Structure definition |
| 152 | * @brief SMARTCARD handle Structure definition |
152 | */ |
| 153 | */ |
153 | typedef struct __SMARTCARD_HandleTypeDef |
| 154 | typedef struct __SMARTCARD_HandleTypeDef |
154 | { |
| 155 | { |
155 | USART_TypeDef *Instance; /*!< USART registers base address */ |
| 156 | USART_TypeDef *Instance; /*!< USART registers base address */ |
156 | |
| 157 | 157 | SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ |
|
| 158 | SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ |
158 | |
| 159 | 159 | const uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ |
|
| 160 | uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ |
160 | |
| 161 | 161 | uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ |
|
| 162 | uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ |
162 | |
| 163 | 163 | __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ |
|
| 164 | __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ |
164 | |
| 165 | 165 | uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ |
|
| 166 | uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ |
166 | |
| 167 | 167 | uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ |
|
| 168 | uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ |
168 | |
| 169 | 169 | __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ |
|
| 170 | __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ |
170 | |
| 171 | 171 | DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ |
|
| 172 | DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ |
172 | |
| 173 | 173 | DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ |
|
| 174 | DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ |
174 | |
| 175 | 175 | HAL_LockTypeDef Lock; /*!< Locking object */ |
|
| 176 | HAL_LockTypeDef Lock; /*!< Locking object */ |
176 | |
| 177 | 177 | __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management |
|
| 178 | __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management |
178 | and also related to Tx operations. |
| 179 | and also related to Tx operations. |
179 | This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ |
| 180 | This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ |
180 | |
| 181 | 181 | __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. |
|
| 182 | __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. |
182 | This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ |
| 183 | This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ |
183 | |
| 184 | 184 | __IO uint32_t ErrorCode; /*!< SmartCard Error code */ |
|
| 185 | __IO uint32_t ErrorCode; /*!< SmartCard Error code */ |
185 | |
| 186 | 186 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
|
| 187 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
187 | void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Tx Complete Callback */ |
| 188 | void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Tx Complete Callback */ |
188 | |
| 189 | 189 | void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Rx Complete Callback */ |
|
| 190 | void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Rx Complete Callback */ |
190 | |
| 191 | 191 | void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Error Callback */ |
|
| 192 | void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Error Callback */ |
192 | |
| 193 | 193 | void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Complete Callback */ |
|
| 194 | void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Complete Callback */ |
194 | |
| 195 | 195 | void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Transmit Complete Callback */ |
|
| 196 | void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Transmit Complete Callback */ |
196 | |
| 197 | 197 | void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Receive Complete Callback */ |
|
| 198 | void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Receive Complete Callback */ |
198 | |
| 199 | 199 | void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp Init callback */ |
|
| 200 | void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp Init callback */ |
200 | |
| 201 | 201 | void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp DeInit callback */ |
|
| 202 | void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp DeInit callback */ |
202 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
| 203 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
203 | |
| 204 | 204 | } SMARTCARD_HandleTypeDef; |
|
| 205 | } SMARTCARD_HandleTypeDef; |
205 | |
| 206 | 206 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
|
| 207 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
207 | /** |
| 208 | /** |
208 | * @brief HAL SMARTCARD Callback ID enumeration definition |
| 209 | * @brief HAL SMARTCARD Callback ID enumeration definition |
209 | */ |
| 210 | */ |
210 | typedef enum |
| 211 | typedef enum |
211 | { |
| 212 | { |
212 | HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ |
| 213 | HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ |
213 | HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ |
| 214 | HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ |
214 | HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ |
| 215 | HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ |
215 | HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ |
| 216 | HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ |
216 | HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ |
| 217 | HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ |
217 | HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ |
| 218 | HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ |
218 | |
| 219 | 219 | HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ |
|
| 220 | HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ |
220 | HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ |
| 221 | HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ |
221 | |
| 222 | 222 | } HAL_SMARTCARD_CallbackIDTypeDef; |
|
| 223 | } HAL_SMARTCARD_CallbackIDTypeDef; |
223 | |
| 224 | 224 | /** |
|
| 225 | /** |
225 | * @brief HAL SMARTCARD Callback pointer definition |
| 226 | * @brief HAL SMARTCARD Callback pointer definition |
226 | */ |
| 227 | */ |
227 | typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsc); /*!< pointer to an SMARTCARD callback function */ |
| 228 | typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsc); /*!< pointer to an SMARTCARD callback function */ |
228 | |
| 229 | 229 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
|
| 230 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
230 | |
| 231 | 231 | /** |
|
| 232 | /** |
232 | * @} |
| 233 | * @} |
233 | */ |
| 234 | */ |
234 | |
| 235 | 235 | /* Exported constants --------------------------------------------------------*/ |
|
| 236 | /* Exported constants --------------------------------------------------------*/ |
236 | /** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants |
| 237 | /** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants |
237 | * @{ |
| 238 | * @{ |
238 | */ |
| 239 | */ |
239 | |
| 240 | 240 | /** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code |
|
| 241 | /** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code |
241 | * @{ |
| 242 | * @{ |
242 | */ |
| 243 | */ |
243 | #define HAL_SMARTCARD_ERROR_NONE 0x00000000U /*!< No error */ |
| 244 | #define HAL_SMARTCARD_ERROR_NONE 0x00000000U /*!< No error */ |
244 | #define HAL_SMARTCARD_ERROR_PE 0x00000001U /*!< Parity error */ |
| 245 | #define HAL_SMARTCARD_ERROR_PE 0x00000001U /*!< Parity error */ |
245 | #define HAL_SMARTCARD_ERROR_NE 0x00000002U /*!< Noise error */ |
| 246 | #define HAL_SMARTCARD_ERROR_NE 0x00000002U /*!< Noise error */ |
246 | #define HAL_SMARTCARD_ERROR_FE 0x00000004U /*!< Frame error */ |
| 247 | #define HAL_SMARTCARD_ERROR_FE 0x00000004U /*!< Frame error */ |
247 | #define HAL_SMARTCARD_ERROR_ORE 0x00000008U /*!< Overrun error */ |
| 248 | #define HAL_SMARTCARD_ERROR_ORE 0x00000008U /*!< Overrun error */ |
248 | #define HAL_SMARTCARD_ERROR_DMA 0x00000010U /*!< DMA transfer error */ |
| 249 | #define HAL_SMARTCARD_ERROR_DMA 0x00000010U /*!< DMA transfer error */ |
249 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
| 250 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
250 | #define HAL_SMARTCARD_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */ |
| 251 | #define HAL_SMARTCARD_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */ |
251 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
| 252 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
252 | /** |
| 253 | /** |
253 | * @} |
| 254 | * @} |
254 | */ |
| 255 | */ |
255 | |
| 256 | 256 | /** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length |
|
| 257 | /** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length |
257 | * @{ |
| 258 | * @{ |
258 | */ |
| 259 | */ |
259 | #define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) |
| 260 | #define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) |
260 | /** |
| 261 | /** |
261 | * @} |
| 262 | * @} |
262 | */ |
| 263 | */ |
263 | |
| 264 | 264 | /** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits |
|
| 265 | /** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits |
265 | * @{ |
| 266 | * @{ |
266 | */ |
| 267 | */ |
267 | #define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) |
| 268 | #define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) |
268 | #define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) |
| 269 | #define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) |
269 | /** |
| 270 | /** |
270 | * @} |
| 271 | * @} |
271 | */ |
| 272 | */ |
272 | |
| 273 | 273 | /** @defgroup SMARTCARD_Parity SMARTCARD Parity |
|
| 274 | /** @defgroup SMARTCARD_Parity SMARTCARD Parity |
274 | * @{ |
| 275 | * @{ |
275 | */ |
| 276 | */ |
276 | #define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
| 277 | #define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
277 | #define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
| 278 | #define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
278 | /** |
| 279 | /** |
279 | * @} |
| 280 | * @} |
280 | */ |
| 281 | */ |
281 | |
| 282 | 282 | /** @defgroup SMARTCARD_Mode SMARTCARD Mode |
|
| 283 | /** @defgroup SMARTCARD_Mode SMARTCARD Mode |
283 | * @{ |
| 284 | * @{ |
284 | */ |
| 285 | */ |
285 | #define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) |
| 286 | #define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) |
286 | #define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) |
| 287 | #define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) |
287 | #define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
| 288 | #define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
288 | /** |
| 289 | /** |
289 | * @} |
| 290 | * @} |
290 | */ |
| 291 | */ |
291 | |
| 292 | 292 | /** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity |
|
| 293 | /** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity |
293 | * @{ |
| 294 | * @{ |
294 | */ |
| 295 | */ |
295 | #define SMARTCARD_POLARITY_LOW 0x00000000U |
| 296 | #define SMARTCARD_POLARITY_LOW 0x00000000U |
296 | #define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) |
| 297 | #define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) |
297 | /** |
| 298 | /** |
298 | * @} |
| 299 | * @} |
299 | */ |
| 300 | */ |
300 | |
| 301 | 301 | /** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase |
|
| 302 | /** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase |
302 | * @{ |
| 303 | * @{ |
303 | */ |
| 304 | */ |
304 | #define SMARTCARD_PHASE_1EDGE 0x00000000U |
| 305 | #define SMARTCARD_PHASE_1EDGE 0x00000000U |
305 | #define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) |
| 306 | #define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) |
306 | /** |
| 307 | /** |
307 | * @} |
| 308 | * @} |
308 | */ |
| 309 | */ |
309 | |
| 310 | 310 | /** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit |
|
| 311 | /** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit |
311 | * @{ |
| 312 | * @{ |
312 | */ |
| 313 | */ |
313 | #define SMARTCARD_LASTBIT_DISABLE 0x00000000U |
| 314 | #define SMARTCARD_LASTBIT_DISABLE 0x00000000U |
314 | #define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) |
| 315 | #define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) |
315 | /** |
| 316 | /** |
316 | * @} |
| 317 | * @} |
317 | */ |
| 318 | */ |
318 | |
| 319 | 319 | /** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State |
|
| 320 | /** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State |
320 | * @{ |
| 321 | * @{ |
321 | */ |
| 322 | */ |
322 | #define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) |
| 323 | #define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) |
323 | #define SMARTCARD_NACK_DISABLE 0x00000000U |
| 324 | #define SMARTCARD_NACK_DISABLE 0x00000000U |
324 | /** |
| 325 | /** |
325 | * @} |
| 326 | * @} |
326 | */ |
| 327 | */ |
327 | |
| 328 | 328 | /** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests |
|
| 329 | /** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests |
329 | * @{ |
| 330 | * @{ |
330 | */ |
| 331 | */ |
331 | #define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT) |
| 332 | #define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT) |
332 | #define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR) |
| 333 | #define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR) |
333 | /** |
| 334 | /** |
334 | * @} |
| 335 | * @} |
335 | */ |
| 336 | */ |
336 | |
| 337 | 337 | /** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler |
|
| 338 | /** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler |
338 | * @{ |
| 339 | * @{ |
339 | */ |
| 340 | */ |
340 | #define SMARTCARD_PRESCALER_SYSCLK_DIV2 0x00000001U /*!< SYSCLK divided by 2 */ |
| 341 | #define SMARTCARD_PRESCALER_SYSCLK_DIV2 0x00000001U /*!< SYSCLK divided by 2 */ |
341 | #define SMARTCARD_PRESCALER_SYSCLK_DIV4 0x00000002U /*!< SYSCLK divided by 4 */ |
| 342 | #define SMARTCARD_PRESCALER_SYSCLK_DIV4 0x00000002U /*!< SYSCLK divided by 4 */ |
342 | #define SMARTCARD_PRESCALER_SYSCLK_DIV6 0x00000003U /*!< SYSCLK divided by 6 */ |
| 343 | #define SMARTCARD_PRESCALER_SYSCLK_DIV6 0x00000003U /*!< SYSCLK divided by 6 */ |
343 | #define SMARTCARD_PRESCALER_SYSCLK_DIV8 0x00000004U /*!< SYSCLK divided by 8 */ |
| 344 | #define SMARTCARD_PRESCALER_SYSCLK_DIV8 0x00000004U /*!< SYSCLK divided by 8 */ |
344 | #define SMARTCARD_PRESCALER_SYSCLK_DIV10 0x00000005U /*!< SYSCLK divided by 10 */ |
| 345 | #define SMARTCARD_PRESCALER_SYSCLK_DIV10 0x00000005U /*!< SYSCLK divided by 10 */ |
345 | #define SMARTCARD_PRESCALER_SYSCLK_DIV12 0x00000006U /*!< SYSCLK divided by 12 */ |
| 346 | #define SMARTCARD_PRESCALER_SYSCLK_DIV12 0x00000006U /*!< SYSCLK divided by 12 */ |
346 | #define SMARTCARD_PRESCALER_SYSCLK_DIV14 0x00000007U /*!< SYSCLK divided by 14 */ |
| 347 | #define SMARTCARD_PRESCALER_SYSCLK_DIV14 0x00000007U /*!< SYSCLK divided by 14 */ |
347 | #define SMARTCARD_PRESCALER_SYSCLK_DIV16 0x00000008U /*!< SYSCLK divided by 16 */ |
| 348 | #define SMARTCARD_PRESCALER_SYSCLK_DIV16 0x00000008U /*!< SYSCLK divided by 16 */ |
348 | #define SMARTCARD_PRESCALER_SYSCLK_DIV18 0x00000009U /*!< SYSCLK divided by 18 */ |
| 349 | #define SMARTCARD_PRESCALER_SYSCLK_DIV18 0x00000009U /*!< SYSCLK divided by 18 */ |
349 | #define SMARTCARD_PRESCALER_SYSCLK_DIV20 0x0000000AU /*!< SYSCLK divided by 20 */ |
| 350 | #define SMARTCARD_PRESCALER_SYSCLK_DIV20 0x0000000AU /*!< SYSCLK divided by 20 */ |
350 | #define SMARTCARD_PRESCALER_SYSCLK_DIV22 0x0000000BU /*!< SYSCLK divided by 22 */ |
| 351 | #define SMARTCARD_PRESCALER_SYSCLK_DIV22 0x0000000BU /*!< SYSCLK divided by 22 */ |
351 | #define SMARTCARD_PRESCALER_SYSCLK_DIV24 0x0000000CU /*!< SYSCLK divided by 24 */ |
| 352 | #define SMARTCARD_PRESCALER_SYSCLK_DIV24 0x0000000CU /*!< SYSCLK divided by 24 */ |
352 | #define SMARTCARD_PRESCALER_SYSCLK_DIV26 0x0000000DU /*!< SYSCLK divided by 26 */ |
| 353 | #define SMARTCARD_PRESCALER_SYSCLK_DIV26 0x0000000DU /*!< SYSCLK divided by 26 */ |
353 | #define SMARTCARD_PRESCALER_SYSCLK_DIV28 0x0000000EU /*!< SYSCLK divided by 28 */ |
| 354 | #define SMARTCARD_PRESCALER_SYSCLK_DIV28 0x0000000EU /*!< SYSCLK divided by 28 */ |
354 | #define SMARTCARD_PRESCALER_SYSCLK_DIV30 0x0000000FU /*!< SYSCLK divided by 30 */ |
| 355 | #define SMARTCARD_PRESCALER_SYSCLK_DIV30 0x0000000FU /*!< SYSCLK divided by 30 */ |
355 | #define SMARTCARD_PRESCALER_SYSCLK_DIV32 0x00000010U /*!< SYSCLK divided by 32 */ |
| 356 | #define SMARTCARD_PRESCALER_SYSCLK_DIV32 0x00000010U /*!< SYSCLK divided by 32 */ |
356 | #define SMARTCARD_PRESCALER_SYSCLK_DIV34 0x00000011U /*!< SYSCLK divided by 34 */ |
| 357 | #define SMARTCARD_PRESCALER_SYSCLK_DIV34 0x00000011U /*!< SYSCLK divided by 34 */ |
357 | #define SMARTCARD_PRESCALER_SYSCLK_DIV36 0x00000012U /*!< SYSCLK divided by 36 */ |
| 358 | #define SMARTCARD_PRESCALER_SYSCLK_DIV36 0x00000012U /*!< SYSCLK divided by 36 */ |
358 | #define SMARTCARD_PRESCALER_SYSCLK_DIV38 0x00000013U /*!< SYSCLK divided by 38 */ |
| 359 | #define SMARTCARD_PRESCALER_SYSCLK_DIV38 0x00000013U /*!< SYSCLK divided by 38 */ |
359 | #define SMARTCARD_PRESCALER_SYSCLK_DIV40 0x00000014U /*!< SYSCLK divided by 40 */ |
| 360 | #define SMARTCARD_PRESCALER_SYSCLK_DIV40 0x00000014U /*!< SYSCLK divided by 40 */ |
360 | #define SMARTCARD_PRESCALER_SYSCLK_DIV42 0x00000015U /*!< SYSCLK divided by 42 */ |
| 361 | #define SMARTCARD_PRESCALER_SYSCLK_DIV42 0x00000015U /*!< SYSCLK divided by 42 */ |
361 | #define SMARTCARD_PRESCALER_SYSCLK_DIV44 0x00000016U /*!< SYSCLK divided by 44 */ |
| 362 | #define SMARTCARD_PRESCALER_SYSCLK_DIV44 0x00000016U /*!< SYSCLK divided by 44 */ |
362 | #define SMARTCARD_PRESCALER_SYSCLK_DIV46 0x00000017U /*!< SYSCLK divided by 46 */ |
| 363 | #define SMARTCARD_PRESCALER_SYSCLK_DIV46 0x00000017U /*!< SYSCLK divided by 46 */ |
363 | #define SMARTCARD_PRESCALER_SYSCLK_DIV48 0x00000018U /*!< SYSCLK divided by 48 */ |
| 364 | #define SMARTCARD_PRESCALER_SYSCLK_DIV48 0x00000018U /*!< SYSCLK divided by 48 */ |
364 | #define SMARTCARD_PRESCALER_SYSCLK_DIV50 0x00000019U /*!< SYSCLK divided by 50 */ |
| 365 | #define SMARTCARD_PRESCALER_SYSCLK_DIV50 0x00000019U /*!< SYSCLK divided by 50 */ |
365 | #define SMARTCARD_PRESCALER_SYSCLK_DIV52 0x0000001AU /*!< SYSCLK divided by 52 */ |
| 366 | #define SMARTCARD_PRESCALER_SYSCLK_DIV52 0x0000001AU /*!< SYSCLK divided by 52 */ |
366 | #define SMARTCARD_PRESCALER_SYSCLK_DIV54 0x0000001BU /*!< SYSCLK divided by 54 */ |
| 367 | #define SMARTCARD_PRESCALER_SYSCLK_DIV54 0x0000001BU /*!< SYSCLK divided by 54 */ |
367 | #define SMARTCARD_PRESCALER_SYSCLK_DIV56 0x0000001CU /*!< SYSCLK divided by 56 */ |
| 368 | #define SMARTCARD_PRESCALER_SYSCLK_DIV56 0x0000001CU /*!< SYSCLK divided by 56 */ |
368 | #define SMARTCARD_PRESCALER_SYSCLK_DIV58 0x0000001DU /*!< SYSCLK divided by 58 */ |
| 369 | #define SMARTCARD_PRESCALER_SYSCLK_DIV58 0x0000001DU /*!< SYSCLK divided by 58 */ |
369 | #define SMARTCARD_PRESCALER_SYSCLK_DIV60 0x0000001EU /*!< SYSCLK divided by 60 */ |
| 370 | #define SMARTCARD_PRESCALER_SYSCLK_DIV60 0x0000001EU /*!< SYSCLK divided by 60 */ |
370 | #define SMARTCARD_PRESCALER_SYSCLK_DIV62 0x0000001FU /*!< SYSCLK divided by 62 */ |
| 371 | #define SMARTCARD_PRESCALER_SYSCLK_DIV62 0x0000001FU /*!< SYSCLK divided by 62 */ |
371 | /** |
| 372 | /** |
372 | * @} |
| 373 | * @} |
373 | */ |
| 374 | */ |
374 | |
| 375 | 375 | /** @defgroup SmartCard_Flags SMARTCARD Flags |
|
| 376 | /** @defgroup SmartCard_Flags SMARTCARD Flags |
376 | * Elements values convention: 0xXXXX |
| 377 | * Elements values convention: 0xXXXX |
377 | * - 0xXXXX : Flag mask in the SR register |
| 378 | * - 0xXXXX : Flag mask in the SR register |
378 | * @{ |
| 379 | * @{ |
379 | */ |
| 380 | */ |
380 | #define SMARTCARD_FLAG_TXE ((uint32_t)USART_SR_TXE) |
| 381 | #define SMARTCARD_FLAG_TXE ((uint32_t)USART_SR_TXE) |
381 | #define SMARTCARD_FLAG_TC ((uint32_t)USART_SR_TC) |
| 382 | #define SMARTCARD_FLAG_TC ((uint32_t)USART_SR_TC) |
382 | #define SMARTCARD_FLAG_RXNE ((uint32_t)USART_SR_RXNE) |
| 383 | #define SMARTCARD_FLAG_RXNE ((uint32_t)USART_SR_RXNE) |
383 | #define SMARTCARD_FLAG_IDLE ((uint32_t)USART_SR_IDLE) |
| 384 | #define SMARTCARD_FLAG_IDLE ((uint32_t)USART_SR_IDLE) |
384 | #define SMARTCARD_FLAG_ORE ((uint32_t)USART_SR_ORE) |
| 385 | #define SMARTCARD_FLAG_ORE ((uint32_t)USART_SR_ORE) |
385 | #define SMARTCARD_FLAG_NE ((uint32_t)USART_SR_NE) |
| 386 | #define SMARTCARD_FLAG_NE ((uint32_t)USART_SR_NE) |
386 | #define SMARTCARD_FLAG_FE ((uint32_t)USART_SR_FE) |
| 387 | #define SMARTCARD_FLAG_FE ((uint32_t)USART_SR_FE) |
387 | #define SMARTCARD_FLAG_PE ((uint32_t)USART_SR_PE) |
| 388 | #define SMARTCARD_FLAG_PE ((uint32_t)USART_SR_PE) |
388 | /** |
| 389 | /** |
389 | * @} |
| 390 | * @} |
390 | */ |
| 391 | */ |
391 | |
| 392 | 392 | /** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition |
|
| 393 | /** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition |
393 | * Elements values convention: 0xY000XXXX |
| 394 | * Elements values convention: 0xY000XXXX |
394 | * - XXXX : Interrupt mask in the Y register |
| 395 | * - XXXX : Interrupt mask in the Y register |
395 | * - Y : Interrupt source register (2bits) |
| 396 | * - Y : Interrupt source register (2bits) |
396 | * - 01: CR1 register |
| 397 | * - 01: CR1 register |
397 | * - 11: CR3 register |
| 398 | * - 11: CR3 register |
398 | * @{ |
| 399 | * @{ |
399 | */ |
| 400 | */ |
400 | #define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_PEIE)) |
| 401 | #define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_PEIE)) |
401 | #define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TXEIE)) |
| 402 | #define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TXEIE)) |
402 | #define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TCIE)) |
| 403 | #define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TCIE)) |
403 | #define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE)) |
| 404 | #define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE)) |
404 | #define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE)) |
| 405 | #define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE)) |
405 | #define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28U | USART_CR3_EIE)) |
| 406 | #define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28U | USART_CR3_EIE)) |
406 | /** |
| 407 | /** |
407 | * @} |
| 408 | * @} |
408 | */ |
| 409 | */ |
409 | |
| 410 | 410 | /** |
|
| 411 | /** |
411 | * @} |
| 412 | * @} |
412 | */ |
| 413 | */ |
413 | |
| 414 | 414 | /* Exported macro ------------------------------------------------------------*/ |
|
| 415 | /* Exported macro ------------------------------------------------------------*/ |
415 | /** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros |
| 416 | /** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros |
416 | * @{ |
| 417 | * @{ |
417 | */ |
| 418 | */ |
418 | |
| 419 | 419 | /** @brief Reset SMARTCARD handle gstate & RxState |
|
| 420 | /** @brief Reset SMARTCARD handle gstate & RxState |
420 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 421 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
421 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 422 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
422 | * @retval None |
| 423 | * @retval None |
423 | */ |
| 424 | */ |
424 | #if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 |
| 425 | #if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 |
425 | #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| 426 | #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
426 | (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ |
| 427 | (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ |
427 | (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ |
| 428 | (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ |
428 | (__HANDLE__)->MspInitCallback = NULL; \ |
| 429 | (__HANDLE__)->MspInitCallback = NULL; \ |
429 | (__HANDLE__)->MspDeInitCallback = NULL; \ |
| 430 | (__HANDLE__)->MspDeInitCallback = NULL; \ |
430 | } while(0U) |
| 431 | } while(0U) |
431 | #else |
| 432 | #else |
432 | #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| 433 | #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
433 | (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ |
| 434 | (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ |
434 | (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ |
| 435 | (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ |
435 | } while(0U) |
| 436 | } while(0U) |
436 | #endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
| 437 | #endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
437 | |
| 438 | 438 | /** @brief Flush the Smartcard DR register |
|
| 439 | /** @brief Flush the Smartcard DR register |
439 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 440 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
440 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 441 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
441 | * @retval None |
| 442 | * @retval None |
442 | */ |
| 443 | */ |
443 | #define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) |
| 444 | #define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) |
444 | |
| 445 | 445 | /** @brief Check whether the specified Smartcard flag is set or not. |
|
| 446 | /** @brief Check whether the specified Smartcard flag is set or not. |
446 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 447 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
447 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 448 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
448 | * @param __FLAG__ specifies the flag to check. |
| 449 | * @param __FLAG__ specifies the flag to check. |
449 | * This parameter can be one of the following values: |
| 450 | * This parameter can be one of the following values: |
450 | * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag |
| 451 | * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag |
451 | * @arg SMARTCARD_FLAG_TC: Transmission Complete flag |
| 452 | * @arg SMARTCARD_FLAG_TC: Transmission Complete flag |
452 | * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag |
| 453 | * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag |
453 | * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag |
| 454 | * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag |
454 | * @arg SMARTCARD_FLAG_ORE: Overrun Error flag |
| 455 | * @arg SMARTCARD_FLAG_ORE: Overrun Error flag |
455 | * @arg SMARTCARD_FLAG_NE: Noise Error flag |
| 456 | * @arg SMARTCARD_FLAG_NE: Noise Error flag |
456 | * @arg SMARTCARD_FLAG_FE: Framing Error flag |
| 457 | * @arg SMARTCARD_FLAG_FE: Framing Error flag |
457 | * @arg SMARTCARD_FLAG_PE: Parity Error flag |
| 458 | * @arg SMARTCARD_FLAG_PE: Parity Error flag |
458 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
| 459 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
459 | */ |
| 460 | */ |
460 | #define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) |
| 461 | #define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) |
461 | |
| 462 | 462 | /** @brief Clear the specified Smartcard pending flags. |
|
| 463 | /** @brief Clear the specified Smartcard pending flags. |
463 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 464 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
464 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 465 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
465 | * @param __FLAG__ specifies the flag to check. |
| 466 | * @param __FLAG__ specifies the flag to check. |
466 | * This parameter can be any combination of the following values: |
| 467 | * This parameter can be any combination of the following values: |
467 | * @arg SMARTCARD_FLAG_TC: Transmission Complete flag. |
| 468 | * @arg SMARTCARD_FLAG_TC: Transmission Complete flag. |
468 | * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag. |
| 469 | * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag. |
469 | * |
| 470 | * |
470 | * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun |
| 471 | * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun |
471 | * error) flags are cleared by software sequence: a read operation to |
| 472 | * error) flags are cleared by software sequence: a read operation to |
472 | * USART_SR register followed by a read operation to USART_DR register. |
| 473 | * USART_SR register followed by a read operation to USART_DR register. |
473 | * @note RXNE flag can be also cleared by a read to the USART_DR register. |
| 474 | * @note RXNE flag can be also cleared by a read to the USART_DR register. |
474 | * @note TC flag can be also cleared by software sequence: a read operation to |
| 475 | * @note TC flag can be also cleared by software sequence: a read operation to |
475 | * USART_SR register followed by a write operation to USART_DR register. |
| 476 | * USART_SR register followed by a write operation to USART_DR register. |
476 | * @note TXE flag is cleared only by a write to the USART_DR register. |
| 477 | * @note TXE flag is cleared only by a write to the USART_DR register. |
477 | * @retval None |
| 478 | * @retval None |
478 | */ |
| 479 | */ |
479 | #define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) |
| 480 | #define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) |
480 | |
| 481 | 481 | /** @brief Clear the SMARTCARD PE pending flag. |
|
| 482 | /** @brief Clear the SMARTCARD PE pending flag. |
482 | * @param __HANDLE__ specifies the USART Handle. |
| 483 | * @param __HANDLE__ specifies the USART Handle. |
483 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 484 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
484 | * @retval None |
| 485 | * @retval None |
485 | */ |
| 486 | */ |
486 | #define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \ |
| 487 | #define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \ |
487 | do{ \ |
| 488 | do{ \ |
488 | __IO uint32_t tmpreg = 0x00U; \ |
| 489 | __IO uint32_t tmpreg = 0x00U; \ |
489 | tmpreg = (__HANDLE__)->Instance->SR; \ |
| 490 | tmpreg = (__HANDLE__)->Instance->SR; \ |
490 | tmpreg = (__HANDLE__)->Instance->DR; \ |
| 491 | tmpreg = (__HANDLE__)->Instance->DR; \ |
491 | UNUSED(tmpreg); \ |
| 492 | UNUSED(tmpreg); \ |
492 | } while(0U) |
| 493 | } while(0U) |
493 | |
| 494 | 494 | /** @brief Clear the SMARTCARD FE pending flag. |
|
| 495 | /** @brief Clear the SMARTCARD FE pending flag. |
495 | * @param __HANDLE__ specifies the USART Handle. |
| 496 | * @param __HANDLE__ specifies the USART Handle. |
496 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 497 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
497 | * @retval None |
| 498 | * @retval None |
498 | */ |
| 499 | */ |
499 | #define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) |
| 500 | #define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) |
500 | |
| 501 | 501 | /** @brief Clear the SMARTCARD NE pending flag. |
|
| 502 | /** @brief Clear the SMARTCARD NE pending flag. |
502 | * @param __HANDLE__ specifies the USART Handle. |
| 503 | * @param __HANDLE__ specifies the USART Handle. |
503 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 504 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
504 | * @retval None |
| 505 | * @retval None |
505 | */ |
| 506 | */ |
506 | #define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) |
| 507 | #define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) |
507 | |
| 508 | 508 | /** @brief Clear the SMARTCARD ORE pending flag. |
|
| 509 | /** @brief Clear the SMARTCARD ORE pending flag. |
509 | * @param __HANDLE__ specifies the USART Handle. |
| 510 | * @param __HANDLE__ specifies the USART Handle. |
510 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 511 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
511 | * @retval None |
| 512 | * @retval None |
512 | */ |
| 513 | */ |
513 | #define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) |
| 514 | #define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) |
514 | |
| 515 | 515 | /** @brief Clear the SMARTCARD IDLE pending flag. |
|
| 516 | /** @brief Clear the SMARTCARD IDLE pending flag. |
516 | * @param __HANDLE__ specifies the USART Handle. |
| 517 | * @param __HANDLE__ specifies the USART Handle. |
517 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 518 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
518 | * @retval None |
| 519 | * @retval None |
519 | */ |
| 520 | */ |
520 | #define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) |
| 521 | #define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) |
521 | |
| 522 | 522 | /** @brief Enable the specified SmartCard interrupt. |
|
| 523 | /** @brief Enable the specified SmartCard interrupt. |
523 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 524 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
524 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 525 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
525 | * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. |
| 526 | * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. |
526 | * This parameter can be one of the following values: |
| 527 | * This parameter can be one of the following values: |
527 | * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt |
| 528 | * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt |
528 | * @arg SMARTCARD_IT_TC: Transmission complete interrupt |
| 529 | * @arg SMARTCARD_IT_TC: Transmission complete interrupt |
529 | * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt |
| 530 | * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt |
530 | * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt |
| 531 | * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt |
531 | * @arg SMARTCARD_IT_PE: Parity Error interrupt |
| 532 | * @arg SMARTCARD_IT_PE: Parity Error interrupt |
532 | * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| 533 | * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
533 | * @retval None |
| 534 | * @retval None |
534 | */ |
| 535 | */ |
535 | #define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ |
| 536 | #define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ |
536 | ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK))) |
| 537 | ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK))) |
537 | |
| 538 | 538 | /** @brief Disable the specified SmartCard interrupt. |
|
| 539 | /** @brief Disable the specified SmartCard interrupt. |
539 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 540 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
540 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 541 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
541 | * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. |
| 542 | * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. |
542 | * This parameter can be one of the following values: |
| 543 | * This parameter can be one of the following values: |
543 | * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt |
| 544 | * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt |
544 | * @arg SMARTCARD_IT_TC: Transmission complete interrupt |
| 545 | * @arg SMARTCARD_IT_TC: Transmission complete interrupt |
545 | * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt |
| 546 | * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt |
546 | * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt |
| 547 | * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt |
547 | * @arg SMARTCARD_IT_PE: Parity Error interrupt |
| 548 | * @arg SMARTCARD_IT_PE: Parity Error interrupt |
548 | * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| 549 | * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
549 | * @retval None |
| 550 | * @retval None |
550 | */ |
| 551 | */ |
551 | #define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ |
| 552 | #define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ |
552 | ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK))) |
| 553 | ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK))) |
553 | |
| 554 | 554 | /** @brief Checks whether the specified SmartCard interrupt has occurred or not. |
|
| 555 | /** @brief Checks whether the specified SmartCard interrupt has occurred or not. |
555 | * @param __HANDLE__ specifies the SmartCard Handle. |
| 556 | * @param __HANDLE__ specifies the SmartCard Handle. |
556 | * @param __IT__ specifies the SMARTCARD interrupt source to check. |
| 557 | * @param __IT__ specifies the SMARTCARD interrupt source to check. |
557 | * This parameter can be one of the following values: |
| 558 | * This parameter can be one of the following values: |
558 | * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt |
| 559 | * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt |
559 | * @arg SMARTCARD_IT_TC: Transmission complete interrupt |
| 560 | * @arg SMARTCARD_IT_TC: Transmission complete interrupt |
560 | * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt |
| 561 | * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt |
561 | * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt |
| 562 | * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt |
562 | * @arg SMARTCARD_IT_ERR: Error interrupt |
| 563 | * @arg SMARTCARD_IT_ERR: Error interrupt |
563 | * @arg SMARTCARD_IT_PE: Parity Error interrupt |
| 564 | * @arg SMARTCARD_IT_PE: Parity Error interrupt |
564 | * @retval The new state of __IT__ (TRUE or FALSE). |
| 565 | * @retval The new state of __IT__ (TRUE or FALSE). |
565 | */ |
| 566 | */ |
566 | #define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK)) |
| 567 | #define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK)) |
567 | |
| 568 | 568 | /** @brief Macro to enable the SMARTCARD's one bit sample method |
|
| 569 | /** @brief Macro to enable the SMARTCARD's one bit sample method |
569 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 570 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
570 | * @retval None |
| 571 | * @retval None |
571 | */ |
| 572 | */ |
572 | #define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
| 573 | #define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
573 | |
| 574 | 574 | /** @brief Macro to disable the SMARTCARD's one bit sample method |
|
| 575 | /** @brief Macro to disable the SMARTCARD's one bit sample method |
575 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 576 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
576 | * @retval None |
| 577 | * @retval None |
577 | */ |
| 578 | */ |
578 | #define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) |
| 579 | #define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) |
579 | |
| 580 | 580 | /** @brief Enable the USART associated to the SMARTCARD Handle |
|
| 581 | /** @brief Enable the USART associated to the SMARTCARD Handle |
581 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 582 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
582 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 583 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
583 | * @retval None |
| 584 | * @retval None |
584 | */ |
| 585 | */ |
585 | #define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
| 586 | #define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
586 | |
| 587 | 587 | /** @brief Disable the USART associated to the SMARTCARD Handle |
|
| 588 | /** @brief Disable the USART associated to the SMARTCARD Handle |
588 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
| 589 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
589 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
| 590 | * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). |
590 | * @retval None |
| 591 | * @retval None |
591 | */ |
| 592 | */ |
592 | #define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
| 593 | #define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
593 | |
| 594 | 594 | /** @brief Macros to enable the SmartCard DMA request. |
|
| 595 | /** @brief Macros to enable the SmartCard DMA request. |
595 | * @param __HANDLE__ specifies the SmartCard Handle. |
| 596 | * @param __HANDLE__ specifies the SmartCard Handle. |
596 | * @param __REQUEST__ specifies the SmartCard DMA request. |
| 597 | * @param __REQUEST__ specifies the SmartCard DMA request. |
597 | * This parameter can be one of the following values: |
| 598 | * This parameter can be one of the following values: |
598 | * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request |
| 599 | * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request |
599 | * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request |
| 600 | * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request |
600 | * @retval None |
| 601 | * @retval None |
601 | */ |
| 602 | */ |
602 | #define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__)) |
| 603 | #define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__)) |
603 | |
| 604 | 604 | /** @brief Macros to disable the SmartCard DMA request. |
|
| 605 | /** @brief Macros to disable the SmartCard DMA request. |
605 | * @param __HANDLE__ specifies the SmartCard Handle. |
| 606 | * @param __HANDLE__ specifies the SmartCard Handle. |
606 | * @param __REQUEST__ specifies the SmartCard DMA request. |
| 607 | * @param __REQUEST__ specifies the SmartCard DMA request. |
607 | * This parameter can be one of the following values: |
| 608 | * This parameter can be one of the following values: |
608 | * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request |
| 609 | * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request |
609 | * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request |
| 610 | * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request |
610 | * @retval None |
| 611 | * @retval None |
611 | */ |
| 612 | */ |
612 | #define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__)) |
| 613 | #define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__)) |
613 | |
| 614 | 614 | /** |
|
| 615 | /** |
615 | * @} |
| 616 | * @} |
616 | */ |
| 617 | */ |
617 | |
| 618 | 618 | /* Exported functions --------------------------------------------------------*/ |
|
| 619 | /* Exported functions --------------------------------------------------------*/ |
619 | /** @addtogroup SMARTCARD_Exported_Functions |
| 620 | /** @addtogroup SMARTCARD_Exported_Functions |
620 | * @{ |
| 621 | * @{ |
621 | */ |
| 622 | */ |
622 | |
| 623 | 623 | /** @addtogroup SMARTCARD_Exported_Functions_Group1 |
|
| 624 | /** @addtogroup SMARTCARD_Exported_Functions_Group1 |
624 | * @{ |
| 625 | * @{ |
625 | */ |
| 626 | */ |
626 | /* Initialization/de-initialization functions **********************************/ |
| 627 | /* Initialization/de-initialization functions **********************************/ |
627 | HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc); |
| 628 | HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc); |
628 | HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc); |
| 629 | HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc); |
629 | HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc); |
| 630 | HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc); |
630 | void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc); |
| 631 | void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc); |
631 | void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc); |
| 632 | void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc); |
632 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
| 633 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
633 | /* Callbacks Register/UnRegister functions ***********************************/ |
| 634 | /* Callbacks Register/UnRegister functions ***********************************/ |
634 | HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback); |
| 635 | HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback); |
635 | HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID); |
| 636 | HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID); |
636 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
| 637 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
637 | /** |
| 638 | /** |
638 | * @} |
| 639 | * @} |
639 | */ |
| 640 | */ |
640 | |
| 641 | 641 | /** @addtogroup SMARTCARD_Exported_Functions_Group2 |
|
| 642 | /** @addtogroup SMARTCARD_Exported_Functions_Group2 |
642 | * @{ |
| 643 | * @{ |
643 | */ |
| 644 | */ |
644 | /* IO operation functions *******************************************************/ |
| 645 | /* IO operation functions *******************************************************/ |
645 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| 646 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
646 | HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| 647 | HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
647 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size); |
| 648 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); |
648 | HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); |
| 649 | HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); |
649 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, const uint8_t *pData, uint16_t Size); |
| 650 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); |
650 | HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); |
| 651 | HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); |
651 | /* Transfer Abort functions */ |
| 652 | /* Transfer Abort functions */ |
652 | HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsc); |
| 653 | HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsc); |
653 | HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsc); |
| 654 | HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsc); |
654 | HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsc); |
| 655 | HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsc); |
655 | HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsc); |
| 656 | HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsc); |
656 | HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsc); |
| 657 | HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsc); |
657 | HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsc); |
| 658 | HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsc); |
658 | |
| 659 | 659 | void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc); |
|
| 660 | void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc); |
660 | void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
| 661 | void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
661 | void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
| 662 | void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
662 | void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc); |
| 663 | void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc); |
663 | void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
| 664 | void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
664 | void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
| 665 | void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
665 | void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
| 666 | void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsc); |
666 | /** |
| 667 | /** |
667 | * @} |
| 668 | * @} |
668 | */ |
| 669 | */ |
669 | |
| 670 | 670 | /** @addtogroup SMARTCARD_Exported_Functions_Group3 |
|
| 671 | /** @addtogroup SMARTCARD_Exported_Functions_Group3 |
671 | * @{ |
| 672 | * @{ |
672 | */ |
| 673 | */ |
673 | /* Peripheral State functions **************************************************/ |
| 674 | /* Peripheral State functions **************************************************/ |
674 | HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(const SMARTCARD_HandleTypeDef *hsc); |
| 675 | HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc); |
675 | uint32_t HAL_SMARTCARD_GetError(const SMARTCARD_HandleTypeDef *hsc); |
| 676 | uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc); |
676 | /** |
| 677 | /** |
677 | * @} |
| 678 | * @} |
678 | */ |
| 679 | */ |
679 | |
| 680 | 680 | /** |
|
| 681 | /** |
681 | * @} |
| 682 | * @} |
682 | */ |
| 683 | */ |
683 | /* Private types -------------------------------------------------------------*/ |
| 684 | /* Private types -------------------------------------------------------------*/ |
684 | /* Private variables ---------------------------------------------------------*/ |
| 685 | /* Private variables ---------------------------------------------------------*/ |
685 | /* Private constants ---------------------------------------------------------*/ |
| 686 | /* Private constants ---------------------------------------------------------*/ |
686 | /** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants |
| 687 | /** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants |
687 | * @{ |
| 688 | * @{ |
688 | */ |
| 689 | */ |
689 | |
| 690 | 690 | /** @brief SMARTCARD interruptions flag mask |
|
| 691 | /** @brief SMARTCARD interruptions flag mask |
691 | * |
| 692 | * |
692 | */ |
| 693 | */ |
693 | #define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ |
| 694 | #define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ |
694 | USART_CR1_IDLEIE | USART_CR3_EIE ) |
| 695 | USART_CR1_IDLEIE | USART_CR3_EIE ) |
695 | |
| 696 | 696 | #define SMARTCARD_CR1_REG_INDEX 1U |
|
| 697 | #define SMARTCARD_CR1_REG_INDEX 1U |
697 | #define SMARTCARD_CR3_REG_INDEX 3U |
| 698 | #define SMARTCARD_CR3_REG_INDEX 3U |
698 | /** |
| 699 | /** |
699 | * @} |
| 700 | * @} |
700 | */ |
| 701 | */ |
701 | |
| 702 | 702 | /* Private macros --------------------------------------------------------*/ |
|
| 703 | /* Private macros --------------------------------------------------------*/ |
703 | /** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros |
| 704 | /** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros |
704 | * @{ |
| 705 | * @{ |
705 | */ |
| 706 | */ |
706 | #define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B) |
| 707 | #define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B) |
707 | #define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \ |
| 708 | #define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \ |
708 | ((STOPBITS) == SMARTCARD_STOPBITS_1_5)) |
| 709 | ((STOPBITS) == SMARTCARD_STOPBITS_1_5)) |
709 | #define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \ |
| 710 | #define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \ |
710 | ((PARITY) == SMARTCARD_PARITY_ODD)) |
| 711 | ((PARITY) == SMARTCARD_PARITY_ODD)) |
711 | #define IS_SMARTCARD_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x000000U)) |
| 712 | #define IS_SMARTCARD_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x000000U)) |
712 | #define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH)) |
| 713 | #define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH)) |
713 | #define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE)) |
| 714 | #define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE)) |
714 | #define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \ |
| 715 | #define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \ |
715 | ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE)) |
| 716 | ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE)) |
716 | #define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \ |
| 717 | #define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \ |
717 | ((NACK) == SMARTCARD_NACK_DISABLE)) |
| 718 | ((NACK) == SMARTCARD_NACK_DISABLE)) |
718 | #define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 2000001U) |
| 719 | #define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 2000001U) |
719 | |
| 720 | 720 | #define SMARTCARD_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25U)/(4U*(__BAUD__))) |
|
| 721 | #define SMARTCARD_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25U)/(4U*(__BAUD__))) |
721 | #define SMARTCARD_DIVMANT(__PCLK__, __BAUD__) (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100U) |
| 722 | #define SMARTCARD_DIVMANT(__PCLK__, __BAUD__) (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100U) |
722 | #define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__) ((((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100U)) * 16U) + 50U) / 100U) |
| 723 | #define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__) ((((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100U)) * 16U) + 50U) / 100U) |
723 | /* SMARTCARD BRR = mantissa + overflow + fraction |
| 724 | /* SMARTCARD BRR = mantissa + overflow + fraction |
724 | = (SMARTCARD DIVMANT << 4) + (SMARTCARD DIVFRAQ & 0xF0) + (SMARTCARD DIVFRAQ & 0x0FU) */ |
| 725 | = (SMARTCARD DIVMANT << 4) + (SMARTCARD DIVFRAQ & 0xF0) + (SMARTCARD DIVFRAQ & 0x0FU) */ |
725 | #define SMARTCARD_BRR(__PCLK__, __BAUD__) (((SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) << 4U) + \ |
| 726 | #define SMARTCARD_BRR(__PCLK__, __BAUD__) (((SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) << 4U) + \ |
726 | (SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0xF0U)) + \ |
| 727 | (SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0xF0U)) + \ |
727 | (SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0x0FU)) |
| 728 | (SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0x0FU)) |
728 | |
| 729 | 729 | /** |
|
| 730 | /** |
730 | * @} |
| 731 | * @} |
731 | */ |
| 732 | */ |
732 | |
| 733 | 733 | /* Private functions ---------------------------------------------------------*/ |
|
| 734 | /* Private functions ---------------------------------------------------------*/ |
734 | /** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions |
| 735 | /** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions |
735 | * @{ |
| 736 | * @{ |
736 | */ |
| 737 | */ |
737 | |
| 738 | 738 | /** |
|
| 739 | /** |
739 | * @} |
| 740 | * @} |
740 | */ |
| 741 | */ |
741 | |
| 742 | 742 | /** |
|
| 743 | /** |
743 | * @} |
| 744 | * @} |
744 | */ |
| 745 | */ |
745 | |
| 746 | 746 | /** |
|
| 747 | /** |
747 | * @} |
| 748 | * @} |
748 | */ |
| 749 | */ |
749 | |
| 750 | 750 | #ifdef __cplusplus |
|
| 751 | #ifdef __cplusplus |
751 | } |
| 752 | } |
752 | #endif |
| 753 | #endif |
753 | |
| 754 | 754 | #endif /* __STM32L1xx_HAL_SMARTCARD_H */ |
|
| 755 | #endif /* __STM32L1xx_HAL_SMARTCARD_H */ |
755 | |
| 756 | - | ||
| 757 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
- | |