Subversion Repositories LedShow

/**

  ******************************************************************************

  * @file    system_stm32f1xx.c

  * @author  MCD Application Team

  * @version V4.2.0

  * @date    31-March-2017

  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.

  *

  * 1.  This file provides two functions and one global variable to be called from

  *     user application:

  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier

  *                      factors, AHB/APBx prescalers and Flash settings).

  *                      This function is called at startup just after reset and

  *                      before branch to main program. This call is made inside

  *                      the "startup_stm32f1xx_xx.s" file.

  *

  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used

  *                                  by the user application to setup the SysTick

  *                                  timer or configure other parameters.

  *                                    

  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must

  *                                 be called whenever the core clock is changed

  *                                 during program execution.

  *

  * 2. After each device reset the HSI (8 MHz) is used as system clock source.

  *    Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to

  *    configure the system clock before to branch to main program.

  *

  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on

  *    the product used), refer to "HSE_VALUE".

  *    When HSE is used as system clock source, directly or through PLL, and you

  *    are using different crystal you have to adapt the HSE value to your own

  *    configuration.

  *        

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>

  *

  * Redistribution and use in source and binary forms, with or without modification,

  * are permitted provided that the following conditions are met:

  *   1. Redistributions of source code must retain the above copyright notice,

  *      this list of conditions and the following disclaimer.

  *   2. Redistributions in binary form must reproduce the above copyright notice,

  *      this list of conditions and the following disclaimer in the documentation

  *      and/or other materials provided with the distribution.

  *   3. Neither the name of STMicroelectronics nor the names of its contributors

  *      may be used to endorse or promote products derived from this software

  *      without specific prior written permission.

  *

  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  *

  ******************************************************************************

  */

/** @addtogroup CMSIS

  * @{

  */

/** @addtogroup stm32f1xx_system

  * @{

  */  

/** @addtogroup STM32F1xx_System_Private_Includes

  * @{

  */

#include "stm32f1xx.h"

/**

  * @}

  */

/** @addtogroup STM32F1xx_System_Private_TypesDefinitions

  * @{

  */

/**

  * @}

  */

/** @addtogroup STM32F1xx_System_Private_Defines

  * @{

  */

#if !defined  (HSE_VALUE) 

  #define HSE_VALUE               8000000U /*!< Default value of the External oscillator in Hz.

                                                This value can be provided and adapted by the user application. */

#endif /* HSE_VALUE */

#if !defined  (HSI_VALUE)

  #define HSI_VALUE               8000000U /*!< Default value of the Internal oscillator in Hz.

                                                This value can be provided and adapted by the user application. */

#endif /* HSI_VALUE */

/*!< Uncomment the following line if you need to use external SRAM  */

#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)

/* #define DATA_IN_ExtSRAM */

#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */

/*!< Uncomment the following line if you need to relocate your vector Table in

     Internal SRAM. */

/* #define VECT_TAB_SRAM */

#define VECT_TAB_OFFSET  0x00000000U /*!< Vector Table base offset field. 

                                  This value must be a multiple of 0x200. */

/**

  * @}

  */

/** @addtogroup STM32F1xx_System_Private_Macros

  * @{

  */

/**

  * @}

  */

/** @addtogroup STM32F1xx_System_Private_Variables

  * @{

  */

/*******************************************************************************

*  Clock Definitions

*******************************************************************************/

#if defined(STM32F100xB) ||defined(STM32F100xE)

  uint32_t SystemCoreClock         = 24000000U;        /*!< System Clock Frequency (Core Clock) */

#else /*!< HSI Selected as System Clock source */

  uint32_t SystemCoreClock         = 72000000U;        /*!< System Clock Frequency (Core Clock) */

#endif

const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};

const uint8_t APBPrescTable[8U] =  {0, 0, 0, 0, 1, 2, 3, 4};

/**

  * @}

  */

/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes

  * @{

  */

#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)

#ifdef DATA_IN_ExtSRAM

  static void SystemInit_ExtMemCtl(void);

#endif /* DATA_IN_ExtSRAM */

#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */

/**

  * @}

  */

/** @addtogroup STM32F1xx_System_Private_Functions

  * @{

  */

/**

  * @brief  Setup the microcontroller system

  *         Initialize the Embedded Flash Interface, the PLL and update the

  *         SystemCoreClock variable.

  * @note   This function should be used only after reset.

  * @param  None

  * @retval None

  */

void SystemInit (void)

{

  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */

  /* Set HSION bit */

  RCC->CR |= 0x00000001U;

  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */

#if !defined(STM32F105xC) && !defined(STM32F107xC)

  RCC->CFGR &= 0xF8FF0000U;

#else

  RCC->CFGR &= 0xF0FF0000U;

#endif /* STM32F105xC */   

  /* Reset HSEON, CSSON and PLLON bits */

  RCC->CR &= 0xFEF6FFFFU;

  /* Reset HSEBYP bit */

  RCC->CR &= 0xFFFBFFFFU;

  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */

  RCC->CFGR &= 0xFF80FFFFU;

#if defined(STM32F105xC) || defined(STM32F107xC)

  /* Reset PLL2ON and PLL3ON bits */

  RCC->CR &= 0xEBFFFFFFU;

  /* Disable all interrupts and clear pending bits  */

  RCC->CIR = 0x00FF0000U;

  /* Reset CFGR2 register */

  RCC->CFGR2 = 0x00000000U;

#elif defined(STM32F100xB) || defined(STM32F100xE)

  /* Disable all interrupts and clear pending bits  */

  RCC->CIR = 0x009F0000U;

  /* Reset CFGR2 register */

  RCC->CFGR2 = 0x00000000U;      

#else

  /* Disable all interrupts and clear pending bits  */

  RCC->CIR = 0x009F0000U;

#endif /* STM32F105xC */

#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)

  #ifdef DATA_IN_ExtSRAM

    SystemInit_ExtMemCtl();

  #endif /* DATA_IN_ExtSRAM */

#endif 

#ifdef VECT_TAB_SRAM

  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */

#else

  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */

#endif 

}

/**

  * @brief  Update SystemCoreClock variable according to Clock Register Values.

  *         The SystemCoreClock variable contains the core clock (HCLK), it can

  *         be used by the user application to setup the SysTick timer or configure

  *         other parameters.

  *          

  * @note   Each time the core clock (HCLK) changes, this function must be called

  *         to update SystemCoreClock variable value. Otherwise, any configuration

  *         based on this variable will be incorrect.        

  *    

  * @note   - The system frequency computed by this function is not the real

  *           frequency in the chip. It is calculated based on the predefined

  *           constant and the selected clock source:

  *            

  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)

  *                                              

  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)

  *                          

  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)

  *             or HSI_VALUE(*) multiplied by the PLL factors.

  *        

  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value

  *             8 MHz) but the real value may vary depending on the variations

  *             in voltage and temperature.  

  *    

  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value

  *              8 MHz or 25 MHz, depending on the product used), user has to ensure

  *              that HSE_VALUE is same as the real frequency of the crystal used.

  *              Otherwise, this function may have wrong result.

  *                

  *         - The result of this function could be not correct when using fractional

  *           value for HSE crystal.

  * @param  None

  * @retval None

  */

void SystemCoreClockUpdate (void)

{

  uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;

#if defined(STM32F105xC) || defined(STM32F107xC)

  uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;

#endif /* STM32F105xC */

#if defined(STM32F100xB) || defined(STM32F100xE)

  uint32_t prediv1factor = 0U;

#endif /* STM32F100xB or STM32F100xE */

  /* Get SYSCLK source -------------------------------------------------------*/

  tmp = RCC->CFGR & RCC_CFGR_SWS;

  switch (tmp)

  {

    case 0x00U:  /* HSI used as system clock */

      SystemCoreClock = HSI_VALUE;

      break;

    case 0x04U:  /* HSE used as system clock */

      SystemCoreClock = HSE_VALUE;

      break;

    case 0x08U:  /* PLL used as system clock */

      /* Get PLL clock source and multiplication factor ----------------------*/

      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;

      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;

#if !defined(STM32F105xC) && !defined(STM32F107xC)      

      pllmull = ( pllmull >> 18U) + 2U;

      if (pllsource == 0x00U)

      {

        /* HSI oscillator clock divided by 2 selected as PLL clock entry */

        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;

      }

      else

      {

 #if defined(STM32F100xB) || defined(STM32F100xE)

       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;

       /* HSE oscillator clock selected as PREDIV1 clock entry */

       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;

 #else

        /* HSE selected as PLL clock entry */

        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)

        {/* HSE oscillator clock divided by 2 */

          SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;

        }

        else

        {

          SystemCoreClock = HSE_VALUE * pllmull;

        }

 #endif

      }

#else

      pllmull = pllmull >> 18U;

      if (pllmull != 0x0DU)

      {

         pllmull += 2U;

      }

      else

      { /* PLL multiplication factor = PLL input clock * 6.5 */

        pllmull = 13U / 2U;

      }

      if (pllsource == 0x00U)

      {

        /* HSI oscillator clock divided by 2 selected as PLL clock entry */

        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;

      }

      else

      {/* PREDIV1 selected as PLL clock entry */

        /* Get PREDIV1 clock source and division factor */

        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;

        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;

        if (prediv1source == 0U)

        {

          /* HSE oscillator clock selected as PREDIV1 clock entry */

          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          

        }

        else

        {/* PLL2 clock selected as PREDIV1 clock entry */

          /* Get PREDIV2 division factor and PLL2 multiplication factor */

          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;

          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;

          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                        

        }

      }

#endif /* STM32F105xC */ 

      break;

    default:

      SystemCoreClock = HSI_VALUE;

      break;

  }

  /* Compute HCLK clock frequency ----------------*/

  /* Get HCLK prescaler */

  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];

  /* HCLK clock frequency */

  SystemCoreClock >>= tmp;  

}

#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)

/**

  * @brief  Setup the external memory controller. Called in startup_stm32f1xx.s

  *          before jump to __main

  * @param  None

  * @retval None

  */

#ifdef DATA_IN_ExtSRAM

/**

  * @brief  Setup the external memory controller.

  *         Called in startup_stm32f1xx_xx.s/.c before jump to main.

  *         This function configures the external SRAM mounted on STM3210E-EVAL

  *         board (STM32 High density devices). This SRAM will be used as program

  *         data memory (including heap and stack).

  * @param  None

  * @retval None

  */

void SystemInit_ExtMemCtl(void)

{

  __IO uint32_t tmpreg;

  /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is

    required, then adjust the Register Addresses */

  /* Enable FSMC clock */

  RCC->AHBENR = 0x00000114U;

  /* Delay after an RCC peripheral clock enabling */

  tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);

  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */

  RCC->APB2ENR = 0x000001E0U;

  /* Delay after an RCC peripheral clock enabling */

  tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);

  (void)(tmpreg);

/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/

/*----------------  SRAM Address lines configuration -------------------------*/

/*----------------  NOE and NWE configuration --------------------------------*/  

/*----------------  NE3 configuration ----------------------------------------*/

/*----------------  NBL0, NBL1 configuration ---------------------------------*/

  GPIOD->CRL = 0x44BB44BBU;  

  GPIOD->CRH = 0xBBBBBBBBU;

  GPIOE->CRL = 0xB44444BBU;  

  GPIOE->CRH = 0xBBBBBBBBU;

  GPIOF->CRL = 0x44BBBBBBU;  

  GPIOF->CRH = 0xBBBB4444U;

  GPIOG->CRL = 0x44BBBBBBU;  

  GPIOG->CRH = 0x444B4B44U;

/*----------------  FSMC Configuration ---------------------------------------*/  

/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/

  FSMC_Bank1->BTCR[4U] = 0x00001091U;

  FSMC_Bank1->BTCR[5U] = 0x00110212U;

}

#endif /* DATA_IN_ExtSRAM */

#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */

/**

  * @}

  */

/**

  * @}

  */

/**

  * @}

  */    

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/