Go to most recent revision | Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 2 | mjames | 1 | /** |
| 2 | ****************************************************************************** |
||
| 3 | * @file stm32l1xx_hal.h |
||
| 4 | * @author MCD Application Team |
||
| 5 | * @version V1.2.0 |
||
| 6 | * @date 01-July-2016 |
||
| 7 | * @brief This file contains all the functions prototypes for the HAL |
||
| 8 | * module driver. |
||
| 9 | ****************************************************************************** |
||
| 10 | * @attention |
||
| 11 | * |
||
| 12 | * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> |
||
| 13 | * |
||
| 14 | * Redistribution and use in source and binary forms, with or without modification, |
||
| 15 | * are permitted provided that the following conditions are met: |
||
| 16 | * 1. Redistributions of source code must retain the above copyright notice, |
||
| 17 | * this list of conditions and the following disclaimer. |
||
| 18 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
||
| 19 | * this list of conditions and the following disclaimer in the documentation |
||
| 20 | * and/or other materials provided with the distribution. |
||
| 21 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
||
| 22 | * may be used to endorse or promote products derived from this software |
||
| 23 | * without specific prior written permission. |
||
| 24 | * |
||
| 25 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
| 26 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
| 27 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
||
| 28 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
||
| 29 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
||
| 30 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
||
| 31 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
||
| 32 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
||
| 33 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
||
| 34 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
||
| 35 | * |
||
| 36 | ****************************************************************************** |
||
| 37 | */ |
||
| 38 | |||
| 39 | /* Define to prevent recursive inclusion -------------------------------------*/ |
||
| 40 | #ifndef __STM32L1xx_HAL_H |
||
| 41 | #define __STM32L1xx_HAL_H |
||
| 42 | |||
| 43 | #ifdef __cplusplus |
||
| 44 | extern "C" { |
||
| 45 | #endif |
||
| 46 | |||
| 47 | /* Includes ------------------------------------------------------------------*/ |
||
| 48 | #include "stm32l1xx_hal_conf.h" |
||
| 49 | |||
| 50 | /** @addtogroup STM32L1xx_HAL_Driver |
||
| 51 | * @{ |
||
| 52 | */ |
||
| 53 | |||
| 54 | /** @addtogroup HAL |
||
| 55 | * @{ |
||
| 56 | */ |
||
| 57 | |||
| 58 | /* Exported types ------------------------------------------------------------*/ |
||
| 59 | /* Exported constants --------------------------------------------------------*/ |
||
| 60 | /** @defgroup HAL_Exported_Constants HAL Exported Constants |
||
| 61 | * @{ |
||
| 62 | */ |
||
| 63 | |||
| 64 | /** @defgroup SYSCFG_Constants SYSCFG: SYStem ConFiG |
||
| 65 | * @{ |
||
| 66 | */ |
||
| 67 | |||
| 68 | /** @defgroup SYSCFG_BootMode Boot Mode |
||
| 69 | * @{ |
||
| 70 | */ |
||
| 71 | |||
| 72 | #define SYSCFG_BOOT_MAINFLASH (0x00000000U) |
||
| 73 | #define SYSCFG_BOOT_SYSTEMFLASH ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_0) |
||
| 74 | #if defined(FSMC_R_BASE) |
||
| 75 | #define SYSCFG_BOOT_FSMC ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_1) |
||
| 76 | #endif /* FSMC_R_BASE */ |
||
| 77 | #define SYSCFG_BOOT_SRAM ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE) |
||
| 78 | |||
| 79 | /** |
||
| 80 | * @} |
||
| 81 | */ |
||
| 82 | |||
| 83 | /** |
||
| 84 | * @} |
||
| 85 | */ |
||
| 86 | |||
| 87 | /** @defgroup RI_Constants RI: Routing Interface |
||
| 88 | * @{ |
||
| 89 | */ |
||
| 90 | |||
| 91 | /** @defgroup RI_InputCapture Input Capture |
||
| 92 | * @{ |
||
| 93 | */ |
||
| 94 | |||
| 95 | #define RI_INPUTCAPTURE_IC1 RI_ICR_IC1 /*!< Input Capture 1 */ |
||
| 96 | #define RI_INPUTCAPTURE_IC2 RI_ICR_IC2 /*!< Input Capture 2 */ |
||
| 97 | #define RI_INPUTCAPTURE_IC3 RI_ICR_IC3 /*!< Input Capture 3 */ |
||
| 98 | #define RI_INPUTCAPTURE_IC4 RI_ICR_IC4 /*!< Input Capture 4 */ |
||
| 99 | |||
| 100 | /** |
||
| 101 | * @} |
||
| 102 | */ |
||
| 103 | |||
| 104 | /** @defgroup TIM_Select TIM Select |
||
| 105 | * @{ |
||
| 106 | */ |
||
| 107 | |||
| 108 | #define TIM_SELECT_NONE (0x00000000U) /*!< None selected */ |
||
| 109 | #define TIM_SELECT_TIM2 ((uint32_t)RI_ICR_TIM_0) /*!< Timer 2 selected */ |
||
| 110 | #define TIM_SELECT_TIM3 ((uint32_t)RI_ICR_TIM_1) /*!< Timer 3 selected */ |
||
| 111 | #define TIM_SELECT_TIM4 ((uint32_t)RI_ICR_TIM) /*!< Timer 4 selected */ |
||
| 112 | |||
| 113 | #define IS_RI_TIM(__TIM__) (((__TIM__) == TIM_SELECT_NONE) || \ |
||
| 114 | ((__TIM__) == TIM_SELECT_TIM2) || \ |
||
| 115 | ((__TIM__) == TIM_SELECT_TIM3) || \ |
||
| 116 | ((__TIM__) == TIM_SELECT_TIM4)) |
||
| 117 | |||
| 118 | /** |
||
| 119 | * @} |
||
| 120 | */ |
||
| 121 | |||
| 122 | /** @defgroup RI_InputCaptureRouting Input Capture Routing |
||
| 123 | * @{ |
||
| 124 | */ |
||
| 125 | /* TIMx_IC1 TIMx_IC2 TIMx_IC3 TIMx_IC4 */ |
||
| 126 | #define RI_INPUTCAPTUREROUTING_0 (0x00000000U) /* PA0 PA1 PA2 PA3 */ |
||
| 127 | #define RI_INPUTCAPTUREROUTING_1 (0x00000001U) /* PA4 PA5 PA6 PA7 */ |
||
| 128 | #define RI_INPUTCAPTUREROUTING_2 (0x00000002U) /* PA8 PA9 PA10 PA11 */ |
||
| 129 | #define RI_INPUTCAPTUREROUTING_3 (0x00000003U) /* PA12 PA13 PA14 PA15 */ |
||
| 130 | #define RI_INPUTCAPTUREROUTING_4 (0x00000004U) /* PC0 PC1 PC2 PC3 */ |
||
| 131 | #define RI_INPUTCAPTUREROUTING_5 (0x00000005U) /* PC4 PC5 PC6 PC7 */ |
||
| 132 | #define RI_INPUTCAPTUREROUTING_6 (0x00000006U) /* PC8 PC9 PC10 PC11 */ |
||
| 133 | #define RI_INPUTCAPTUREROUTING_7 (0x00000007U) /* PC12 PC13 PC14 PC15 */ |
||
| 134 | #define RI_INPUTCAPTUREROUTING_8 (0x00000008U) /* PD0 PD1 PD2 PD3 */ |
||
| 135 | #define RI_INPUTCAPTUREROUTING_9 (0x00000009U) /* PD4 PD5 PD6 PD7 */ |
||
| 136 | #define RI_INPUTCAPTUREROUTING_10 (0x0000000AU) /* PD8 PD9 PD10 PD11 */ |
||
| 137 | #define RI_INPUTCAPTUREROUTING_11 (0x0000000BU) /* PD12 PD13 PD14 PD15 */ |
||
| 138 | #define RI_INPUTCAPTUREROUTING_12 (0x0000000CU) /* PE0 PE1 PE2 PE3 */ |
||
| 139 | #define RI_INPUTCAPTUREROUTING_13 (0x0000000DU) /* PE4 PE5 PE6 PE7 */ |
||
| 140 | #define RI_INPUTCAPTUREROUTING_14 (0x0000000EU) /* PE8 PE9 PE10 PE11 */ |
||
| 141 | #define RI_INPUTCAPTUREROUTING_15 (0x0000000FU) /* PE12 PE13 PE14 PE15 */ |
||
| 142 | |||
| 143 | #define IS_RI_INPUTCAPTURE_ROUTING(__ROUTING__) (((__ROUTING__) == RI_INPUTCAPTUREROUTING_0) || \ |
||
| 144 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_1) || \ |
||
| 145 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_2) || \ |
||
| 146 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_3) || \ |
||
| 147 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_4) || \ |
||
| 148 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_5) || \ |
||
| 149 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_6) || \ |
||
| 150 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_7) || \ |
||
| 151 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_8) || \ |
||
| 152 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_9) || \ |
||
| 153 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_10) || \ |
||
| 154 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_11) || \ |
||
| 155 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_12) || \ |
||
| 156 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_13) || \ |
||
| 157 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_14) || \ |
||
| 158 | ((__ROUTING__) == RI_INPUTCAPTUREROUTING_15)) |
||
| 159 | |||
| 160 | /** |
||
| 161 | * @} |
||
| 162 | */ |
||
| 163 | |||
| 164 | /** @defgroup RI_IOSwitch IO Switch |
||
| 165 | * @{ |
||
| 166 | */ |
||
| 167 | #define RI_ASCR1_REGISTER (0x80000000U) |
||
| 168 | /* ASCR1 I/O switch: bit 31 is set to '1' to indicate that the mask is in ASCR1 register */ |
||
| 169 | #define RI_IOSWITCH_CH0 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_0) |
||
| 170 | #define RI_IOSWITCH_CH1 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_1) |
||
| 171 | #define RI_IOSWITCH_CH2 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_2) |
||
| 172 | #define RI_IOSWITCH_CH3 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_3) |
||
| 173 | #define RI_IOSWITCH_CH4 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_4) |
||
| 174 | #define RI_IOSWITCH_CH5 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_5) |
||
| 175 | #define RI_IOSWITCH_CH6 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_6) |
||
| 176 | #define RI_IOSWITCH_CH7 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_7) |
||
| 177 | #define RI_IOSWITCH_CH8 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_8) |
||
| 178 | #define RI_IOSWITCH_CH9 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_9) |
||
| 179 | #define RI_IOSWITCH_CH10 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_10) |
||
| 180 | #define RI_IOSWITCH_CH11 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_11) |
||
| 181 | #define RI_IOSWITCH_CH12 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_12) |
||
| 182 | #define RI_IOSWITCH_CH13 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_13) |
||
| 183 | #define RI_IOSWITCH_CH14 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_14) |
||
| 184 | #define RI_IOSWITCH_CH15 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_15) |
||
| 185 | #define RI_IOSWITCH_CH18 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_18) |
||
| 186 | #define RI_IOSWITCH_CH19 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_19) |
||
| 187 | #define RI_IOSWITCH_CH20 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_20) |
||
| 188 | #define RI_IOSWITCH_CH21 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_21) |
||
| 189 | #define RI_IOSWITCH_CH22 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_22) |
||
| 190 | #define RI_IOSWITCH_CH23 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_23) |
||
| 191 | #define RI_IOSWITCH_CH24 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_24) |
||
| 192 | #define RI_IOSWITCH_CH25 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_25) |
||
| 193 | #define RI_IOSWITCH_VCOMP ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_VCOMP) /* VCOMP (ADC channel 26) is an internal switch used to connect selected channel to COMP1 non inverting input */ |
||
| 194 | #if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ |
||
| 195 | #define RI_IOSWITCH_CH27 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_27) |
||
| 196 | #define RI_IOSWITCH_CH28 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_28) |
||
| 197 | #define RI_IOSWITCH_CH29 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_29) |
||
| 198 | #define RI_IOSWITCH_CH30 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_30) |
||
| 199 | #define RI_IOSWITCH_CH31 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_31) |
||
| 200 | #endif /* RI_ASCR2_CH1b */ |
||
| 201 | |||
| 202 | /* ASCR2 IO switch: bit 31 is set to '0' to indicate that the mask is in ASCR2 register */ |
||
| 203 | #define RI_IOSWITCH_GR10_1 ((uint32_t)RI_ASCR2_GR10_1) |
||
| 204 | #define RI_IOSWITCH_GR10_2 ((uint32_t)RI_ASCR2_GR10_2) |
||
| 205 | #define RI_IOSWITCH_GR10_3 ((uint32_t)RI_ASCR2_GR10_3) |
||
| 206 | #define RI_IOSWITCH_GR10_4 ((uint32_t)RI_ASCR2_GR10_4) |
||
| 207 | #define RI_IOSWITCH_GR6_1 ((uint32_t)RI_ASCR2_GR6_1) |
||
| 208 | #define RI_IOSWITCH_GR6_2 ((uint32_t)RI_ASCR2_GR6_2) |
||
| 209 | #define RI_IOSWITCH_GR5_1 ((uint32_t)RI_ASCR2_GR5_1) |
||
| 210 | #define RI_IOSWITCH_GR5_2 ((uint32_t)RI_ASCR2_GR5_2) |
||
| 211 | #define RI_IOSWITCH_GR5_3 ((uint32_t)RI_ASCR2_GR5_3) |
||
| 212 | #define RI_IOSWITCH_GR4_1 ((uint32_t)RI_ASCR2_GR4_1) |
||
| 213 | #define RI_IOSWITCH_GR4_2 ((uint32_t)RI_ASCR2_GR4_2) |
||
| 214 | #define RI_IOSWITCH_GR4_3 ((uint32_t)RI_ASCR2_GR4_3) |
||
| 215 | #if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3, Cat.4 and Cat.5 */ |
||
| 216 | #define RI_IOSWITCH_CH0b ((uint32_t)RI_ASCR2_CH0b) |
||
| 217 | #if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ |
||
| 218 | #define RI_IOSWITCH_CH1b ((uint32_t)RI_ASCR2_CH1b) |
||
| 219 | #define RI_IOSWITCH_CH2b ((uint32_t)RI_ASCR2_CH2b) |
||
| 220 | #define RI_IOSWITCH_CH3b ((uint32_t)RI_ASCR2_CH3b) |
||
| 221 | #define RI_IOSWITCH_CH6b ((uint32_t)RI_ASCR2_CH6b) |
||
| 222 | #define RI_IOSWITCH_CH7b ((uint32_t)RI_ASCR2_CH7b) |
||
| 223 | #define RI_IOSWITCH_CH8b ((uint32_t)RI_ASCR2_CH8b) |
||
| 224 | #define RI_IOSWITCH_CH9b ((uint32_t)RI_ASCR2_CH9b) |
||
| 225 | #define RI_IOSWITCH_CH10b ((uint32_t)RI_ASCR2_CH10b) |
||
| 226 | #define RI_IOSWITCH_CH11b ((uint32_t)RI_ASCR2_CH11b) |
||
| 227 | #define RI_IOSWITCH_CH12b ((uint32_t)RI_ASCR2_CH12b) |
||
| 228 | #endif /* RI_ASCR2_CH1b */ |
||
| 229 | #define RI_IOSWITCH_GR6_3 ((uint32_t)RI_ASCR2_GR6_3) |
||
| 230 | #define RI_IOSWITCH_GR6_4 ((uint32_t)RI_ASCR2_GR6_4) |
||
| 231 | #endif /* RI_ASCR2_CH0b */ |
||
| 232 | |||
| 233 | |||
| 234 | #if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ |
||
| 235 | |||
| 236 | #define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ |
||
| 237 | ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ |
||
| 238 | ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ |
||
| 239 | ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ |
||
| 240 | ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ |
||
| 241 | ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ |
||
| 242 | ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ |
||
| 243 | ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ |
||
| 244 | ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ |
||
| 245 | ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ |
||
| 246 | ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ |
||
| 247 | ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ |
||
| 248 | ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_CH27) || \ |
||
| 249 | ((__IOSWITCH__) == RI_IOSWITCH_CH28) || ((__IOSWITCH__) == RI_IOSWITCH_CH29) || \ |
||
| 250 | ((__IOSWITCH__) == RI_IOSWITCH_CH30) || ((__IOSWITCH__) == RI_IOSWITCH_CH31) || \ |
||
| 251 | ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || \ |
||
| 252 | ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || \ |
||
| 253 | ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || \ |
||
| 254 | ((__IOSWITCH__) == RI_IOSWITCH_GR6_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_4) || \ |
||
| 255 | ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || \ |
||
| 256 | ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || \ |
||
| 257 | ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || \ |
||
| 258 | ((__IOSWITCH__) == RI_IOSWITCH_CH0b) || ((__IOSWITCH__) == RI_IOSWITCH_CH1b) || \ |
||
| 259 | ((__IOSWITCH__) == RI_IOSWITCH_CH2b) || ((__IOSWITCH__) == RI_IOSWITCH_CH3b) || \ |
||
| 260 | ((__IOSWITCH__) == RI_IOSWITCH_CH6b) || ((__IOSWITCH__) == RI_IOSWITCH_CH7b) || \ |
||
| 261 | ((__IOSWITCH__) == RI_IOSWITCH_CH8b) || ((__IOSWITCH__) == RI_IOSWITCH_CH9b) || \ |
||
| 262 | ((__IOSWITCH__) == RI_IOSWITCH_CH10b) || ((__IOSWITCH__) == RI_IOSWITCH_CH11b) || \ |
||
| 263 | ((__IOSWITCH__) == RI_IOSWITCH_CH12b)) |
||
| 264 | |||
| 265 | #else /* !RI_ASCR2_CH1b */ |
||
| 266 | |||
| 267 | #if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3 */ |
||
| 268 | |||
| 269 | #define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ |
||
| 270 | ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ |
||
| 271 | ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ |
||
| 272 | ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ |
||
| 273 | ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ |
||
| 274 | ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ |
||
| 275 | ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ |
||
| 276 | ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ |
||
| 277 | ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ |
||
| 278 | ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ |
||
| 279 | ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ |
||
| 280 | ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ |
||
| 281 | ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \ |
||
| 282 | ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \ |
||
| 283 | ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \ |
||
| 284 | ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \ |
||
| 285 | ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \ |
||
| 286 | ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \ |
||
| 287 | ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || ((__IOSWITCH__) == RI_IOSWITCH_CH0b)) |
||
| 288 | |||
| 289 | #else /* !RI_ASCR2_CH0b */ /* STM32L1 devices category Cat.1 and Cat.2 */ |
||
| 290 | |||
| 291 | #define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ |
||
| 292 | ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ |
||
| 293 | ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ |
||
| 294 | ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ |
||
| 295 | ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ |
||
| 296 | ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ |
||
| 297 | ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ |
||
| 298 | ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ |
||
| 299 | ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ |
||
| 300 | ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ |
||
| 301 | ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ |
||
| 302 | ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ |
||
| 303 | ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \ |
||
| 304 | ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \ |
||
| 305 | ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \ |
||
| 306 | ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \ |
||
| 307 | ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \ |
||
| 308 | ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \ |
||
| 309 | ((__IOSWITCH__) == RI_IOSWITCH_GR4_3)) |
||
| 310 | |||
| 311 | #endif /* RI_ASCR2_CH0b */ |
||
| 312 | #endif /* RI_ASCR2_CH1b */ |
||
| 313 | |||
| 314 | /** |
||
| 315 | * @} |
||
| 316 | */ |
||
| 317 | |||
| 318 | /** @defgroup RI_Pin PIN define |
||
| 319 | * @{ |
||
| 320 | */ |
||
| 321 | #define RI_PIN_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ |
||
| 322 | #define RI_PIN_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ |
||
| 323 | #define RI_PIN_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ |
||
| 324 | #define RI_PIN_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ |
||
| 325 | #define RI_PIN_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ |
||
| 326 | #define RI_PIN_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ |
||
| 327 | #define RI_PIN_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ |
||
| 328 | #define RI_PIN_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ |
||
| 329 | #define RI_PIN_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ |
||
| 330 | #define RI_PIN_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ |
||
| 331 | #define RI_PIN_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ |
||
| 332 | #define RI_PIN_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ |
||
| 333 | #define RI_PIN_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ |
||
| 334 | #define RI_PIN_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ |
||
| 335 | #define RI_PIN_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ |
||
| 336 | #define RI_PIN_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ |
||
| 337 | #define RI_PIN_ALL ((uint16_t)0xFFFF) /*!< All pins selected */ |
||
| 338 | |||
| 339 | #define IS_RI_PIN(__PIN__) ((__PIN__) != (uint16_t)0x00) |
||
| 340 | |||
| 341 | /** |
||
| 342 | * @} |
||
| 343 | */ |
||
| 344 | |||
| 345 | /** |
||
| 346 | * @} |
||
| 347 | */ |
||
| 348 | |||
| 349 | /** |
||
| 350 | * @} |
||
| 351 | */ |
||
| 352 | |||
| 353 | /* Exported macro ------------------------------------------------------------*/ |
||
| 354 | |||
| 355 | /** @defgroup HAL_Exported_Macros HAL Exported Macros |
||
| 356 | * @{ |
||
| 357 | */ |
||
| 358 | |||
| 359 | /** @defgroup DBGMCU_Macros DBGMCU: Debug MCU |
||
| 360 | * @{ |
||
| 361 | */ |
||
| 362 | |||
| 363 | /** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode |
||
| 364 | * @brief Freeze/Unfreeze Peripherals in Debug mode |
||
| 365 | * @{ |
||
| 366 | */ |
||
| 367 | |||
| 368 | /** |
||
| 369 | * @brief TIM2 Peripherals Debug mode |
||
| 370 | */ |
||
| 371 | #if defined (DBGMCU_APB1_FZ_DBG_TIM2_STOP) |
||
| 372 | #define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP) |
||
| 373 | #define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP) |
||
| 374 | #endif |
||
| 375 | |||
| 376 | /** |
||
| 377 | * @brief TIM3 Peripherals Debug mode |
||
| 378 | */ |
||
| 379 | #if defined (DBGMCU_APB1_FZ_DBG_TIM3_STOP) |
||
| 380 | #define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP) |
||
| 381 | #define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP) |
||
| 382 | #endif |
||
| 383 | |||
| 384 | /** |
||
| 385 | * @brief TIM4 Peripherals Debug mode |
||
| 386 | */ |
||
| 387 | #if defined (DBGMCU_APB1_FZ_DBG_TIM4_STOP) |
||
| 388 | #define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP) |
||
| 389 | #define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP) |
||
| 390 | #endif |
||
| 391 | |||
| 392 | /** |
||
| 393 | * @brief TIM5 Peripherals Debug mode |
||
| 394 | */ |
||
| 395 | #if defined (DBGMCU_APB1_FZ_DBG_TIM5_STOP) |
||
| 396 | #define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP) |
||
| 397 | #define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP) |
||
| 398 | #endif |
||
| 399 | |||
| 400 | /** |
||
| 401 | * @brief TIM6 Peripherals Debug mode |
||
| 402 | */ |
||
| 403 | #if defined (DBGMCU_APB1_FZ_DBG_TIM6_STOP) |
||
| 404 | #define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) |
||
| 405 | #define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) |
||
| 406 | #endif |
||
| 407 | |||
| 408 | /** |
||
| 409 | * @brief TIM7 Peripherals Debug mode |
||
| 410 | */ |
||
| 411 | #if defined (DBGMCU_APB1_FZ_DBG_TIM7_STOP) |
||
| 412 | #define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) |
||
| 413 | #define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) |
||
| 414 | #endif |
||
| 415 | |||
| 416 | /** |
||
| 417 | * @brief RTC Peripherals Debug mode |
||
| 418 | */ |
||
| 419 | #if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP) |
||
| 420 | #define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) |
||
| 421 | #define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) |
||
| 422 | #endif |
||
| 423 | |||
| 424 | /** |
||
| 425 | * @brief WWDG Peripherals Debug mode |
||
| 426 | */ |
||
| 427 | #if defined (DBGMCU_APB1_FZ_DBG_WWDG_STOP) |
||
| 428 | #define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) |
||
| 429 | #define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) |
||
| 430 | #endif |
||
| 431 | |||
| 432 | /** |
||
| 433 | * @brief IWDG Peripherals Debug mode |
||
| 434 | */ |
||
| 435 | #if defined (DBGMCU_APB1_FZ_DBG_IWDG_STOP) |
||
| 436 | #define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) |
||
| 437 | #define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) |
||
| 438 | #endif |
||
| 439 | |||
| 440 | /** |
||
| 441 | * @brief I2C1 Peripherals Debug mode |
||
| 442 | */ |
||
| 443 | #if defined (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) |
||
| 444 | #define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) |
||
| 445 | #define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) |
||
| 446 | #endif |
||
| 447 | |||
| 448 | /** |
||
| 449 | * @brief I2C2 Peripherals Debug mode |
||
| 450 | */ |
||
| 451 | #if defined (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) |
||
| 452 | #define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) |
||
| 453 | #define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) |
||
| 454 | #endif |
||
| 455 | |||
| 456 | /** |
||
| 457 | * @brief TIM9 Peripherals Debug mode |
||
| 458 | */ |
||
| 459 | #if defined (DBGMCU_APB2_FZ_DBG_TIM9_STOP) |
||
| 460 | #define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP) |
||
| 461 | #define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP) |
||
| 462 | #endif |
||
| 463 | |||
| 464 | /** |
||
| 465 | * @brief TIM10 Peripherals Debug mode |
||
| 466 | */ |
||
| 467 | #if defined (DBGMCU_APB2_FZ_DBG_TIM10_STOP) |
||
| 468 | #define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP) |
||
| 469 | #define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP) |
||
| 470 | #endif |
||
| 471 | |||
| 472 | /** |
||
| 473 | * @brief TIM11 Peripherals Debug mode |
||
| 474 | */ |
||
| 475 | #if defined (DBGMCU_APB2_FZ_DBG_TIM11_STOP) |
||
| 476 | #define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP) |
||
| 477 | #define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP) |
||
| 478 | #endif |
||
| 479 | |||
| 480 | |||
| 481 | /** |
||
| 482 | * @} |
||
| 483 | */ |
||
| 484 | |||
| 485 | /** |
||
| 486 | * @} |
||
| 487 | */ |
||
| 488 | |||
| 489 | /** @defgroup SYSCFG_Macros SYSCFG: SYStem ConFiG |
||
| 490 | * @{ |
||
| 491 | */ |
||
| 492 | |||
| 493 | /** @defgroup SYSCFG_VrefInt VREFINT configuration |
||
| 494 | * @{ |
||
| 495 | */ |
||
| 496 | |||
| 497 | /** |
||
| 498 | * @brief Enables or disables the output of internal reference voltage |
||
| 499 | * (VREFINT) on I/O pin. |
||
| 500 | * The VREFINT output can be routed to any I/O in group 3: |
||
| 501 | * - For Cat.1 and Cat.2 devices: CH8 (PB0) or CH9 (PB1). |
||
| 502 | * - For Cat.3 devices: CH8 (PB0), CH9 (PB1) or CH0b (PB2). |
||
| 503 | * - For Cat.4 and Cat.5 devices: CH8 (PB0), CH9 (PB1), CH0b (PB2), |
||
| 504 | * CH1b (PF11) or CH2b (PF12). |
||
| 505 | * Note: Comparator peripheral clock must be preliminarility enabled, |
||
| 506 | * either in COMP user function "HAL_COMP_MspInit()" (should be |
||
| 507 | * done if comparators are used) or by direct clock enable: |
||
| 508 | * Refer to macro "__HAL_RCC_COMP_CLK_ENABLE()". |
||
| 509 | * Note: In addition with this macro, Vrefint output buffer must be |
||
| 510 | * connected to the selected I/O pin. Refer to macro |
||
| 511 | * "__HAL_RI_IOSWITCH_CLOSE()". |
||
| 512 | * @note ENABLE: Internal reference voltage connected to I/O group 3 |
||
| 513 | * @note DISABLE: Internal reference voltage disconnected from I/O group 3 |
||
| 514 | * @retval None |
||
| 515 | */ |
||
| 516 | #define __HAL_SYSCFG_VREFINT_OUT_ENABLE() SET_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) |
||
| 517 | #define __HAL_SYSCFG_VREFINT_OUT_DISABLE() CLEAR_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) |
||
| 518 | |||
| 519 | /** |
||
| 520 | * @} |
||
| 521 | */ |
||
| 522 | |||
| 523 | /** @defgroup SYSCFG_BootModeConfig Boot Mode Configuration |
||
| 524 | * @{ |
||
| 525 | */ |
||
| 526 | |||
| 527 | /** |
||
| 528 | * @brief Main Flash memory mapped at 0x00000000 |
||
| 529 | */ |
||
| 530 | #define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) |
||
| 531 | |||
| 532 | /** @brief System Flash memory mapped at 0x00000000 |
||
| 533 | */ |
||
| 534 | #define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0) |
||
| 535 | |||
| 536 | /** @brief Embedded SRAM mapped at 0x00000000 |
||
| 537 | */ |
||
| 538 | #define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1) |
||
| 539 | |||
| 540 | #if defined(FSMC_R_BASE) |
||
| 541 | /** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 |
||
| 542 | */ |
||
| 543 | #define __HAL_SYSCFG_REMAPMEMORY_FSMC() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_1) |
||
| 544 | |||
| 545 | #endif /* FSMC_R_BASE */ |
||
| 546 | |||
| 547 | /** |
||
| 548 | * @brief Returns the boot mode as configured by user. |
||
| 549 | * @retval The boot mode as configured by user. The returned value can be one |
||
| 550 | * of the following values: |
||
| 551 | * @arg SYSCFG_BOOT_MAINFLASH |
||
| 552 | * @arg SYSCFG_BOOT_SYSTEMFLASH |
||
| 553 | * @arg SYSCFG_BOOT_FSMC (available only for STM32L151xD, STM32L152xD & STM32L162xD) |
||
| 554 | * @arg SYSCFG_BOOT_SRAM |
||
| 555 | */ |
||
| 556 | #define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_BOOT_MODE) |
||
| 557 | |||
| 558 | /** |
||
| 559 | * @} |
||
| 560 | */ |
||
| 561 | |||
| 562 | /** @defgroup SYSCFG_USBConfig USB DP line Configuration |
||
| 563 | * @{ |
||
| 564 | */ |
||
| 565 | |||
| 566 | /** |
||
| 567 | * @brief Control the internal pull-up on USB DP line. |
||
| 568 | */ |
||
| 569 | #define __HAL_SYSCFG_USBPULLUP_ENABLE() SET_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU) |
||
| 570 | |||
| 571 | #define __HAL_SYSCFG_USBPULLUP_DISABLE() CLEAR_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU) |
||
| 572 | |||
| 573 | /** |
||
| 574 | * @} |
||
| 575 | */ |
||
| 576 | |||
| 577 | /** |
||
| 578 | * @} |
||
| 579 | */ |
||
| 580 | |||
| 581 | /** @defgroup RI_Macris RI: Routing Interface |
||
| 582 | * @{ |
||
| 583 | */ |
||
| 584 | |||
| 585 | /** @defgroup RI_InputCaputureConfig Input Capture configuration |
||
| 586 | * @{ |
||
| 587 | */ |
||
| 588 | |||
| 589 | /** |
||
| 590 | * @brief Configures the routing interface to map Input Capture 1 of TIMx to a selected I/O pin. |
||
| 591 | * @param __TIMSELECT__: Timer select. |
||
| 592 | * This parameter can be one of the following values: |
||
| 593 | * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. |
||
| 594 | * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. |
||
| 595 | * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. |
||
| 596 | * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. |
||
| 597 | * @param __INPUT__: selects which pin to be routed to Input Capture. |
||
| 598 | * This parameter must be a value of @ref RI_InputCaptureRouting |
||
| 599 | * e.g. |
||
| 600 | * __HAL_RI_REMAP_INPUTCAPTURE1(TIM_SELECT_TIM2, RI_INPUTCAPTUREROUTING_1) |
||
| 601 | * allows routing of Input capture IC1 of TIM2 to PA4. |
||
| 602 | * For details about correspondence between RI_INPUTCAPTUREROUTING_x |
||
| 603 | * and I/O pins refer to the parameters' description in the header file |
||
| 604 | * or refer to the product reference manual. |
||
| 605 | * @note Input capture selection bits are not reset by this function. |
||
| 606 | * To reset input capture selection bits, use SYSCFG_RIDeInit() function. |
||
| 607 | * @note The I/O should be configured in alternate function mode (AF14) using |
||
| 608 | * GPIO_PinAFConfig() function. |
||
| 609 | * @retval None. |
||
| 610 | */ |
||
| 611 | #define __HAL_RI_REMAP_INPUTCAPTURE1(__TIMSELECT__, __INPUT__) \ |
||
| 612 | do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ |
||
| 613 | assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ |
||
| 614 | MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ |
||
| 615 | SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC1); \ |
||
| 616 | MODIFY_REG(RI->ICR, RI_ICR_IC1OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC1OS)); \ |
||
| 617 | }while(0) |
||
| 618 | |||
| 619 | /** |
||
| 620 | * @brief Configures the routing interface to map Input Capture 2 of TIMx to a selected I/O pin. |
||
| 621 | * @param __TIMSELECT__: Timer select. |
||
| 622 | * This parameter can be one of the following values: |
||
| 623 | * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. |
||
| 624 | * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. |
||
| 625 | * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. |
||
| 626 | * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. |
||
| 627 | * @param __INPUT__: selects which pin to be routed to Input Capture. |
||
| 628 | * This parameter must be a value of @ref RI_InputCaptureRouting |
||
| 629 | * @retval None. |
||
| 630 | */ |
||
| 631 | #define __HAL_RI_REMAP_INPUTCAPTURE2(__TIMSELECT__, __INPUT__) \ |
||
| 632 | do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ |
||
| 633 | assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ |
||
| 634 | MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ |
||
| 635 | SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC2); \ |
||
| 636 | MODIFY_REG(RI->ICR, RI_ICR_IC2OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC2OS)); \ |
||
| 637 | }while(0) |
||
| 638 | |||
| 639 | /** |
||
| 640 | * @brief Configures the routing interface to map Input Capture 3 of TIMx to a selected I/O pin. |
||
| 641 | * @param __TIMSELECT__: Timer select. |
||
| 642 | * This parameter can be one of the following values: |
||
| 643 | * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. |
||
| 644 | * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. |
||
| 645 | * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. |
||
| 646 | * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. |
||
| 647 | * @param __INPUT__: selects which pin to be routed to Input Capture. |
||
| 648 | * This parameter must be a value of @ref RI_InputCaptureRouting |
||
| 649 | * @retval None. |
||
| 650 | */ |
||
| 651 | #define __HAL_RI_REMAP_INPUTCAPTURE3(__TIMSELECT__, __INPUT__) \ |
||
| 652 | do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ |
||
| 653 | assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ |
||
| 654 | MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ |
||
| 655 | SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC3); \ |
||
| 656 | MODIFY_REG(RI->ICR, RI_ICR_IC3OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC3OS)); \ |
||
| 657 | }while(0) |
||
| 658 | |||
| 659 | /** |
||
| 660 | * @brief Configures the routing interface to map Input Capture 4 of TIMx to a selected I/O pin. |
||
| 661 | * @param __TIMSELECT__: Timer select. |
||
| 662 | * This parameter can be one of the following values: |
||
| 663 | * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. |
||
| 664 | * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. |
||
| 665 | * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. |
||
| 666 | * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. |
||
| 667 | * @param __INPUT__: selects which pin to be routed to Input Capture. |
||
| 668 | * This parameter must be a value of @ref RI_InputCaptureRouting |
||
| 669 | * @retval None. |
||
| 670 | */ |
||
| 671 | #define __HAL_RI_REMAP_INPUTCAPTURE4(__TIMSELECT__, __INPUT__) \ |
||
| 672 | do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ |
||
| 673 | assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ |
||
| 674 | MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ |
||
| 675 | SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC4); \ |
||
| 676 | MODIFY_REG(RI->ICR, RI_ICR_IC4OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC4OS)); \ |
||
| 677 | }while(0) |
||
| 678 | |||
| 679 | /** |
||
| 680 | * @} |
||
| 681 | */ |
||
| 682 | |||
| 683 | /** @defgroup RI_SwitchControlConfig Switch Control configuration |
||
| 684 | * @{ |
||
| 685 | */ |
||
| 686 | |||
| 687 | /** |
||
| 688 | * @brief Enable or disable the switch control mode. |
||
| 689 | * @note ENABLE: ADC analog switches closed if the corresponding |
||
| 690 | * I/O switch is also closed. |
||
| 691 | * When using COMP1, switch control mode must be enabled. |
||
| 692 | * @note DISABLE: ADC analog switches open or controlled by the ADC interface. |
||
| 693 | * When using the ADC for acquisition, switch control mode |
||
| 694 | * must be disabled. |
||
| 695 | * @note COMP1 comparator and ADC cannot be used at the same time since |
||
| 696 | * they share the ADC switch matrix. |
||
| 697 | * @retval None |
||
| 698 | */ |
||
| 699 | #define __HAL_RI_SWITCHCONTROLMODE_ENABLE() SET_BIT(RI->ASCR1, RI_ASCR1_SCM) |
||
| 700 | |||
| 701 | #define __HAL_RI_SWITCHCONTROLMODE_DISABLE() CLEAR_BIT(RI->ASCR1, RI_ASCR1_SCM) |
||
| 702 | |||
| 703 | /* |
||
| 704 | * @brief Close or Open the routing interface Input Output switches. |
||
| 705 | * @param __IOSWITCH__: selects the I/O analog switch number. |
||
| 706 | * This parameter must be a value of @ref RI_IOSwitch |
||
| 707 | * @retval None |
||
| 708 | */ |
||
| 709 | #define __HAL_RI_IOSWITCH_CLOSE(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \ |
||
| 710 | if ((__IOSWITCH__) >> 31 != 0 ) \ |
||
| 711 | { \ |
||
| 712 | SET_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \ |
||
| 713 | } \ |
||
| 714 | else \ |
||
| 715 | { \ |
||
| 716 | SET_BIT(RI->ASCR2, (__IOSWITCH__)); \ |
||
| 717 | } \ |
||
| 718 | }while(0) |
||
| 719 | |||
| 720 | #define __HAL_RI_IOSWITCH_OPEN(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \ |
||
| 721 | if ((__IOSWITCH__) >> 31 != 0 ) \ |
||
| 722 | { \ |
||
| 723 | CLEAR_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \ |
||
| 724 | } \ |
||
| 725 | else \ |
||
| 726 | { \ |
||
| 727 | CLEAR_BIT(RI->ASCR2, (__IOSWITCH__)); \ |
||
| 728 | } \ |
||
| 729 | }while(0) |
||
| 730 | |||
| 731 | #if defined (COMP_CSR_SW1) |
||
| 732 | /** |
||
| 733 | * @brief Close or open the internal switch COMP1_SW1. |
||
| 734 | * This switch connects I/O pin PC3 (can be used as ADC channel 13) |
||
| 735 | * and OPAMP3 ouput to ADC switch matrix (ADC channel VCOMP, channel |
||
| 736 | * 26) and COMP1 non-inverting input. |
||
| 737 | * Pin PC3 connection depends on another switch setting, refer to |
||
| 738 | * macro "__HAL_ADC_CHANNEL_SPEED_FAST()". |
||
| 739 | * @retval None. |
||
| 740 | */ |
||
| 741 | #define __HAL_RI_SWITCH_COMP1_SW1_CLOSE() SET_BIT(COMP->CSR, COMP_CSR_SW1) |
||
| 742 | |||
| 743 | #define __HAL_RI_SWITCH_COMP1_SW1_OPEN() CLEAR_BIT(COMP->CSR, COMP_CSR_SW1) |
||
| 744 | #endif /* COMP_CSR_SW1 */ |
||
| 745 | |||
| 746 | /** |
||
| 747 | * @} |
||
| 748 | */ |
||
| 749 | |||
| 750 | /** @defgroup RI_HystConfig Hysteresis Activation and Deactivation |
||
| 751 | * @{ |
||
| 752 | */ |
||
| 753 | |||
| 754 | /** |
||
| 755 | * @brief Enable or disable Hysteresis of the input schmitt triger of Ports A |
||
| 756 | * When the I/Os are programmed in input mode by standard I/O port |
||
| 757 | * registers, the Schmitt trigger and the hysteresis are enabled by default. |
||
| 758 | * When hysteresis is disabled, it is possible to read the |
||
| 759 | * corresponding port with a trigger level of VDDIO/2. |
||
| 760 | * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
||
| 761 | * This parameter must be a value of @ref RI_Pin |
||
| 762 | * @retval None |
||
| 763 | */ |
||
| 764 | #define __HAL_RI_HYSTERIS_PORTA_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 765 | CLEAR_BIT(RI->HYSCR1, (__IOPIN__)); \ |
||
| 766 | } while(0) |
||
| 767 | |||
| 768 | #define __HAL_RI_HYSTERIS_PORTA_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 769 | SET_BIT(RI->HYSCR1, (__IOPIN__)); \ |
||
| 770 | } while(0) |
||
| 771 | |||
| 772 | /** |
||
| 773 | * @brief Enable or disable Hysteresis of the input schmitt triger of Ports B |
||
| 774 | * When the I/Os are programmed in input mode by standard I/O port |
||
| 775 | * registers, the Schmitt trigger and the hysteresis are enabled by default. |
||
| 776 | * When hysteresis is disabled, it is possible to read the |
||
| 777 | * corresponding port with a trigger level of VDDIO/2. |
||
| 778 | * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
||
| 779 | * This parameter must be a value of @ref RI_Pin |
||
| 780 | * @retval None |
||
| 781 | */ |
||
| 782 | #define __HAL_RI_HYSTERIS_PORTB_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 783 | CLEAR_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \ |
||
| 784 | } while(0) |
||
| 785 | |||
| 786 | #define __HAL_RI_HYSTERIS_PORTB_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 787 | SET_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \ |
||
| 788 | } while(0) |
||
| 789 | |||
| 790 | /** |
||
| 791 | * @brief Enable or disable Hysteresis of the input schmitt triger of Ports C |
||
| 792 | * When the I/Os are programmed in input mode by standard I/O port |
||
| 793 | * registers, the Schmitt trigger and the hysteresis are enabled by default. |
||
| 794 | * When hysteresis is disabled, it is possible to read the |
||
| 795 | * corresponding port with a trigger level of VDDIO/2. |
||
| 796 | * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
||
| 797 | * This parameter must be a value of @ref RI_Pin |
||
| 798 | * @retval None |
||
| 799 | */ |
||
| 800 | #define __HAL_RI_HYSTERIS_PORTC_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 801 | CLEAR_BIT(RI->HYSCR2, (__IOPIN__)); \ |
||
| 802 | } while(0) |
||
| 803 | |||
| 804 | #define __HAL_RI_HYSTERIS_PORTC_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 805 | SET_BIT(RI->HYSCR2, (__IOPIN__)); \ |
||
| 806 | } while(0) |
||
| 807 | |||
| 808 | /** |
||
| 809 | * @brief Enable or disable Hysteresis of the input schmitt triger of Ports D |
||
| 810 | * When the I/Os are programmed in input mode by standard I/O port |
||
| 811 | * registers, the Schmitt trigger and the hysteresis are enabled by default. |
||
| 812 | * When hysteresis is disabled, it is possible to read the |
||
| 813 | * corresponding port with a trigger level of VDDIO/2. |
||
| 814 | * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
||
| 815 | * This parameter must be a value of @ref RI_Pin |
||
| 816 | * @retval None |
||
| 817 | */ |
||
| 818 | #define __HAL_RI_HYSTERIS_PORTD_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 819 | CLEAR_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \ |
||
| 820 | } while(0) |
||
| 821 | |||
| 822 | #define __HAL_RI_HYSTERIS_PORTD_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 823 | SET_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \ |
||
| 824 | } while(0) |
||
| 825 | |||
| 826 | #if defined (GPIOE_BASE) |
||
| 827 | |||
| 828 | /** |
||
| 829 | * @brief Enable or disable Hysteresis of the input schmitt triger of Ports E |
||
| 830 | * When the I/Os are programmed in input mode by standard I/O port |
||
| 831 | * registers, the Schmitt trigger and the hysteresis are enabled by default. |
||
| 832 | * When hysteresis is disabled, it is possible to read the |
||
| 833 | * corresponding port with a trigger level of VDDIO/2. |
||
| 834 | * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
||
| 835 | * This parameter must be a value of @ref RI_Pin |
||
| 836 | * @retval None |
||
| 837 | */ |
||
| 838 | #define __HAL_RI_HYSTERIS_PORTE_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 839 | CLEAR_BIT(RI->HYSCR3, (__IOPIN__)); \ |
||
| 840 | } while(0) |
||
| 841 | |||
| 842 | #define __HAL_RI_HYSTERIS_PORTE_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 843 | SET_BIT(RI->HYSCR3, (__IOPIN__)); \ |
||
| 844 | } while(0) |
||
| 845 | |||
| 846 | #endif /* GPIOE_BASE */ |
||
| 847 | |||
| 848 | #if defined(GPIOF_BASE) || defined(GPIOG_BASE) |
||
| 849 | |||
| 850 | /** |
||
| 851 | * @brief Enable or disable Hysteresis of the input schmitt triger of Ports F |
||
| 852 | * When the I/Os are programmed in input mode by standard I/O port |
||
| 853 | * registers, the Schmitt trigger and the hysteresis are enabled by default. |
||
| 854 | * When hysteresis is disabled, it is possible to read the |
||
| 855 | * corresponding port with a trigger level of VDDIO/2. |
||
| 856 | * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
||
| 857 | * This parameter must be a value of @ref RI_Pin |
||
| 858 | * @retval None |
||
| 859 | */ |
||
| 860 | #define __HAL_RI_HYSTERIS_PORTF_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 861 | CLEAR_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \ |
||
| 862 | } while(0) |
||
| 863 | |||
| 864 | #define __HAL_RI_HYSTERIS_PORTF_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 865 | SET_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \ |
||
| 866 | } while(0) |
||
| 867 | |||
| 868 | /** |
||
| 869 | * @brief Enable or disable Hysteresis of the input schmitt triger of Ports G |
||
| 870 | * When the I/Os are programmed in input mode by standard I/O port |
||
| 871 | * registers, the Schmitt trigger and the hysteresis are enabled by default. |
||
| 872 | * When hysteresis is disabled, it is possible to read the |
||
| 873 | * corresponding port with a trigger level of VDDIO/2. |
||
| 874 | * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
||
| 875 | * This parameter must be a value of @ref RI_Pin |
||
| 876 | * @retval None |
||
| 877 | */ |
||
| 878 | #define __HAL_RI_HYSTERIS_PORTG_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 879 | CLEAR_BIT(RI->HYSCR4, (__IOPIN__)); \ |
||
| 880 | } while(0) |
||
| 881 | |||
| 882 | #define __HAL_RI_HYSTERIS_PORTG_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
||
| 883 | SET_BIT(RI->HYSCR4, (__IOPIN__)); \ |
||
| 884 | } while(0) |
||
| 885 | |||
| 886 | #endif /* GPIOF_BASE || GPIOG_BASE */ |
||
| 887 | |||
| 888 | /** |
||
| 889 | * @} |
||
| 890 | */ |
||
| 891 | |||
| 892 | /** |
||
| 893 | * @} |
||
| 894 | */ |
||
| 895 | |||
| 896 | /** |
||
| 897 | * @} |
||
| 898 | */ |
||
| 899 | |||
| 900 | /* Exported functions --------------------------------------------------------*/ |
||
| 901 | |||
| 902 | /** @addtogroup HAL_Exported_Functions |
||
| 903 | * @{ |
||
| 904 | */ |
||
| 905 | |||
| 906 | /** @addtogroup HAL_Exported_Functions_Group1 |
||
| 907 | * @{ |
||
| 908 | */ |
||
| 909 | |||
| 910 | /* Initialization and de-initialization functions ******************************/ |
||
| 911 | HAL_StatusTypeDef HAL_Init(void); |
||
| 912 | HAL_StatusTypeDef HAL_DeInit(void); |
||
| 913 | void HAL_MspInit(void); |
||
| 914 | void HAL_MspDeInit(void); |
||
| 915 | HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); |
||
| 916 | |||
| 917 | /** |
||
| 918 | * @} |
||
| 919 | */ |
||
| 920 | |||
| 921 | /** @addtogroup HAL_Exported_Functions_Group2 |
||
| 922 | * @{ |
||
| 923 | */ |
||
| 924 | |||
| 925 | /* Peripheral Control functions ************************************************/ |
||
| 926 | void HAL_IncTick(void); |
||
| 927 | void HAL_Delay(__IO uint32_t Delay); |
||
| 928 | uint32_t HAL_GetTick(void); |
||
| 929 | void HAL_SuspendTick(void); |
||
| 930 | void HAL_ResumeTick(void); |
||
| 931 | uint32_t HAL_GetHalVersion(void); |
||
| 932 | uint32_t HAL_GetREVID(void); |
||
| 933 | uint32_t HAL_GetDEVID(void); |
||
| 934 | void HAL_DBGMCU_EnableDBGSleepMode(void); |
||
| 935 | void HAL_DBGMCU_DisableDBGSleepMode(void); |
||
| 936 | void HAL_DBGMCU_EnableDBGStopMode(void); |
||
| 937 | void HAL_DBGMCU_DisableDBGStopMode(void); |
||
| 938 | void HAL_DBGMCU_EnableDBGStandbyMode(void); |
||
| 939 | void HAL_DBGMCU_DisableDBGStandbyMode(void); |
||
| 940 | |||
| 941 | /** |
||
| 942 | * @} |
||
| 943 | */ |
||
| 944 | |||
| 945 | /** |
||
| 946 | * @} |
||
| 947 | */ |
||
| 948 | |||
| 949 | |||
| 950 | /** |
||
| 951 | * @} |
||
| 952 | */ |
||
| 953 | |||
| 954 | /** |
||
| 955 | * @} |
||
| 956 | */ |
||
| 957 | |||
| 958 | #ifdef __cplusplus |
||
| 959 | } |
||
| 960 | #endif |
||
| 961 | |||
| 962 | #endif /* __STM32L1xx_HAL_H */ |
||
| 963 | |||
| 964 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |