WebSVN – EDIS_Ignition – Blame – /trunk/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c

Rev	Author	Line No.	Line
18	mjames	1	/**
		2	******************************************************************************
		3	* @file stm32f1xx_hal_rcc_ex.c
		4	* @author MCD Application Team
		5	* @brief Extended RCC HAL module driver.
		6	* This file provides firmware functions to manage the following
		7	* functionalities RCC extension peripheral:
		8	* + Extended Peripheral Control functions
		9	*
		10	******************************************************************************
		11	* @attention
		12	*
		13	* Copyright (c) 2016 STMicroelectronics.
		14	* All rights reserved.
		15	*
		16	* This software is licensed under terms that can be found in the LICENSE file in
		17	* the root directory of this software component.
		18	* If no LICENSE file comes with this software, it is provided AS-IS.
		19	******************************************************************************
		20	*/
		21
		22	/* Includes ------------------------------------------------------------------*/
		23	#include "stm32f1xx_hal.h"
		24
		25	/** @addtogroup STM32F1xx_HAL_Driver
		26	* @{
		27	*/
		28
		29	#ifdef HAL_RCC_MODULE_ENABLED
		30
		31	/** @defgroup RCCEx RCCEx
		32	* @brief RCC Extension HAL module driver.
		33	* @{
		34	*/
		35
		36	/* Private typedef -----------------------------------------------------------*/
		37	/* Private define ------------------------------------------------------------*/
		38	/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
		39	* @{
		40	*/
		41	/**
		42	* @}
		43	*/
		44
		45	/* Private macro -------------------------------------------------------------*/
		46	/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
		47	* @{
		48	*/
		49	/**
		50	* @}
		51	*/
		52
		53	/* Private variables ---------------------------------------------------------*/
		54	/* Private function prototypes -----------------------------------------------*/
		55	/* Private functions ---------------------------------------------------------*/
		56
		57	/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
		58	* @{
		59	*/
		60
		61	/** @defgroup RCCEx_Exported_Functions_Group1 Peripheral Control functions
		62	* @brief Extended Peripheral Control functions
		63	*
		64	@verbatim
		65	===============================================================================
		66	##### Extended Peripheral Control functions #####
		67	===============================================================================
		68	[..]
		69	This subsection provides a set of functions allowing to control the RCC Clocks
		70	frequencies.
		71	[..]
		72	(@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
		73	select the RTC clock source; in this case the Backup domain will be reset in
		74	order to modify the RTC Clock source, as consequence RTC registers (including
		75	the backup registers) are set to their reset values.
		76
		77	@endverbatim
		78	* @{
		79	*/
		80
		81	/**
		82	* @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the
		83	* RCC_PeriphCLKInitTypeDef.
		84	* @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
		85	* contains the configuration information for the Extended Peripherals clocks(RTC clock).
		86	*
		87	* @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
		88	* the RTC clock source; in this case the Backup domain will be reset in
		89	* order to modify the RTC Clock source, as consequence RTC registers (including
		90	* the backup registers) are set to their reset values.
		91	*
		92	* @note In case of STM32F105xC or STM32F107xC devices, PLLI2S will be enabled if requested on
		93	* one of 2 I2S interfaces. When PLLI2S is enabled, you need to call HAL_RCCEx_DisablePLLI2S to
		94	* manually disable it.
		95	*
		96	* @retval HAL status
		97	*/
		98	HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
		99	{
		100	uint32_t tickstart = 0U, temp_reg = 0U;
		101	#if defined(STM32F105xC) \|\| defined(STM32F107xC)
		102	uint32_t pllactive = 0U;
		103	#endif /* STM32F105xC \|\| STM32F107xC */
		104
		105	/* Check the parameters */
		106	assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
		107
		108	/------------------------------- RTC/LCD Configuration ------------------------/
		109	if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
		110	{
		111	FlagStatus pwrclkchanged = RESET;
		112
		113	/* check for RTC Parameters used to output RTCCLK */
		114	assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
		115
		116	/* As soon as function is called to change RTC clock source, activation of the
		117	power domain is done. */
		118	/* Requires to enable write access to Backup Domain of necessary */
		119	if (__HAL_RCC_PWR_IS_CLK_DISABLED())
		120	{
		121	__HAL_RCC_PWR_CLK_ENABLE();
		122	pwrclkchanged = SET;
		123	}
		124
		125	if (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
		126	{
		127	/* Enable write access to Backup domain */
		128	SET_BIT(PWR->CR, PWR_CR_DBP);
		129
		130	/* Wait for Backup domain Write protection disable */
		131	tickstart = HAL_GetTick();
		132
		133	while (HAL_IS_BIT_CLR(PWR->CR, PWR_CR_DBP))
		134	{
		135	if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
		136	{
		137	return HAL_TIMEOUT;
		138	}
		139	}
		140	}
		141
		142	/* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
		143	temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL);
		144	if ((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
		145	{
		146	/* Store the content of BDCR register before the reset of Backup Domain */
		147	temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
		148	/* RTC Clock selection can be changed only if the Backup Domain is reset */
		149	__HAL_RCC_BACKUPRESET_FORCE();
		150	__HAL_RCC_BACKUPRESET_RELEASE();
		151	/* Restore the Content of BDCR register */
		152	RCC->BDCR = temp_reg;
		153
		154	/* Wait for LSERDY if LSE was enabled */
		155	if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON))
		156	{
		157	/* Get Start Tick */
		158	tickstart = HAL_GetTick();
		159
		160	/* Wait till LSE is ready */
		161	while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
		162	{
		163	if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE)
		164	{
		165	return HAL_TIMEOUT;
		166	}
		167	}
		168	}
		169	}
		170	__HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
		171
		172	/* Require to disable power clock if necessary */
		173	if (pwrclkchanged == SET)
		174	{
		175	__HAL_RCC_PWR_CLK_DISABLE();
		176	}
		177	}
		178
		179	/------------------------------ ADC clock Configuration ------------------/
		180	if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC)
		181	{
		182	/* Check the parameters */
		183	assert_param(IS_RCC_ADCPLLCLK_DIV(PeriphClkInit->AdcClockSelection));
		184
		185	/* Configure the ADC clock source */
		186	__HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection);
		187	}
		188
		189	#if defined(STM32F105xC) \|\| defined(STM32F107xC)
		190	/------------------------------ I2S2 Configuration ------------------------/
		191	if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2)
		192	{
		193	/* Check the parameters */
		194	assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection));
		195
		196	/* Configure the I2S2 clock source */
		197	__HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection);
		198	}
		199
		200	/------------------------------ I2S3 Configuration ------------------------/
		201	if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3)
		202	{
		203	/* Check the parameters */
		204	assert_param(IS_RCC_I2S3CLKSOURCE(PeriphClkInit->I2s3ClockSelection));
		205
		206	/* Configure the I2S3 clock source */
		207	__HAL_RCC_I2S3_CONFIG(PeriphClkInit->I2s3ClockSelection);
		208	}
		209
		210	/------------------------------ PLL I2S Configuration ----------------------/
		211	/* Check that PLLI2S need to be enabled */
		212	if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S2SRC) \|\| HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
		213	{
		214	/* Update flag to indicate that PLL I2S should be active */
		215	pllactive = 1;
		216	}
		217
		218	/* Check if PLL I2S need to be enabled */
		219	if (pllactive == 1)
		220	{
		221	/* Enable PLL I2S only if not active */
		222	if (HAL_IS_BIT_CLR(RCC->CR, RCC_CR_PLL3ON))
		223	{
		224	/* Check the parameters */
		225	assert_param(IS_RCC_PLLI2S_MUL(PeriphClkInit->PLLI2S.PLLI2SMUL));
		226	assert_param(IS_RCC_HSE_PREDIV2(PeriphClkInit->PLLI2S.HSEPrediv2Value));
		227
		228	/* Prediv2 can be written only when the PLL2 is disabled. */
		229	/* Return an error only if new value is different from the programmed value */
		230	if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2ON) && \
		231	(__HAL_RCC_HSE_GET_PREDIV2() != PeriphClkInit->PLLI2S.HSEPrediv2Value))
		232	{
		233	return HAL_ERROR;
		234	}
		235
		236	/* Configure the HSE prediv2 factor --------------------------------*/
		237	__HAL_RCC_HSE_PREDIV2_CONFIG(PeriphClkInit->PLLI2S.HSEPrediv2Value);
		238
		239	/* Configure the main PLLI2S multiplication factors. */
		240	__HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SMUL);
		241
		242	/* Enable the main PLLI2S. */
		243	__HAL_RCC_PLLI2S_ENABLE();
		244
		245	/* Get Start Tick*/
		246	tickstart = HAL_GetTick();
		247
		248	/* Wait till PLLI2S is ready */
		249	while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
		250	{
		251	if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
		252	{
		253	return HAL_TIMEOUT;
		254	}
		255	}
		256	}
		257	else
		258	{
		259	/* Return an error only if user wants to change the PLLI2SMUL whereas PLLI2S is active */
		260	if (READ_BIT(RCC->CFGR2, RCC_CFGR2_PLL3MUL) != PeriphClkInit->PLLI2S.PLLI2SMUL)
		261	{
		262	return HAL_ERROR;
		263	}
		264	}
		265	}
		266	#endif /* STM32F105xC \|\| STM32F107xC */
		267
		268	#if defined(STM32F102x6) \|\| defined(STM32F102xB) \|\| defined(STM32F103x6)\
		269	\|\| defined(STM32F103xB) \|\| defined(STM32F103xE) \|\| defined(STM32F103xG)\
		270	\|\| defined(STM32F105xC) \|\| defined(STM32F107xC)
		271	/------------------------------ USB clock Configuration ------------------/
		272	if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)
		273	{
		274	/* Check the parameters */
		275	assert_param(IS_RCC_USBPLLCLK_DIV(PeriphClkInit->UsbClockSelection));
		276
		277	/* Configure the USB clock source */
		278	__HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection);
		279	}
		280	#endif /* STM32F102x6 \|\| STM32F102xB \|\| STM32F103x6 \|\| STM32F103xB \|\| STM32F103xE \|\| STM32F103xG \|\| STM32F105xC \|\| STM32F107xC */
		281
		282	return HAL_OK;
		283	}
		284
		285	/**
		286	* @brief Get the PeriphClkInit according to the internal
		287	* RCC configuration registers.
		288	* @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
		289	* returns the configuration information for the Extended Peripherals clocks(RTC, I2S, ADC clocks).
		290	* @retval None
		291	*/
		292	void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
		293	{
		294	uint32_t srcclk = 0U;
		295
		296	/* Set all possible values for the extended clock type parameter------------*/
		297	PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_RTC;
		298
		299	/* Get the RTC configuration -----------------------------------------------*/
		300	srcclk = __HAL_RCC_GET_RTC_SOURCE();
		301	/* Source clock is LSE or LSI*/
		302	PeriphClkInit->RTCClockSelection = srcclk;
		303
		304	/* Get the ADC clock configuration -----------------------------------------*/
		305	PeriphClkInit->PeriphClockSelection \|= RCC_PERIPHCLK_ADC;
		306	PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE();
		307
		308	#if defined(STM32F105xC) \|\| defined(STM32F107xC)
		309	/* Get the I2S2 clock configuration -----------------------------------------*/
		310	PeriphClkInit->PeriphClockSelection \|= RCC_PERIPHCLK_I2S2;
		311	PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE();
		312
		313	/* Get the I2S3 clock configuration -----------------------------------------*/
		314	PeriphClkInit->PeriphClockSelection \|= RCC_PERIPHCLK_I2S3;
		315	PeriphClkInit->I2s3ClockSelection = __HAL_RCC_GET_I2S3_SOURCE();
		316
		317	#endif /* STM32F105xC \|\| STM32F107xC */
		318
		319	#if defined(STM32F103xE) \|\| defined(STM32F103xG)
		320	/* Get the I2S2 clock configuration -----------------------------------------*/
		321	PeriphClkInit->PeriphClockSelection \|= RCC_PERIPHCLK_I2S2;
		322	PeriphClkInit->I2s2ClockSelection = RCC_I2S2CLKSOURCE_SYSCLK;
		323
		324	/* Get the I2S3 clock configuration -----------------------------------------*/
		325	PeriphClkInit->PeriphClockSelection \|= RCC_PERIPHCLK_I2S3;
		326	PeriphClkInit->I2s3ClockSelection = RCC_I2S3CLKSOURCE_SYSCLK;
		327
		328	#endif /* STM32F103xE \|\| STM32F103xG */
		329
		330	#if defined(STM32F102x6) \|\| defined(STM32F102xB) \|\| defined(STM32F103x6)\
		331	\|\| defined(STM32F103xB) \|\| defined(STM32F103xE) \|\| defined(STM32F103xG)\
		332	\|\| defined(STM32F105xC) \|\| defined(STM32F107xC)
		333	/* Get the USB clock configuration -----------------------------------------*/
		334	PeriphClkInit->PeriphClockSelection \|= RCC_PERIPHCLK_USB;
		335	PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE();
		336	#endif /* STM32F102x6 \|\| STM32F102xB \|\| STM32F103x6 \|\| STM32F103xB \|\| STM32F103xE \|\| STM32F103xG \|\| STM32F105xC \|\| STM32F107xC */
		337	}
		338
		339	/**
		340	* @brief Returns the peripheral clock frequency
		341	* @note Returns 0 if peripheral clock is unknown
		342	* @param PeriphClk Peripheral clock identifier
		343	* This parameter can be one of the following values:
		344	* @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock
		345	* @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock
		346	@if STM32F103xE
		347	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		348	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		349	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		350	@endif
		351	@if STM32F103xG
		352	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		353	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		354	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		355	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		356	@endif
		357	@if STM32F105xC
		358	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		359	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		360	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		361	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		362	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		363	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		364	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		365	* @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
		366	@endif
		367	@if STM32F107xC
		368	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		369	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		370	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		371	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		372	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		373	* @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
		374	* @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
		375	* @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
		376	@endif
		377	@if STM32F102xx
		378	* @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
		379	@endif
		380	@if STM32F103xx
		381	* @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
		382	@endif
		383	* @retval Frequency in Hz (0: means that no available frequency for the peripheral)
		384	*/
		385	uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
		386	{
		387	#if defined(STM32F105xC) \|\| defined(STM32F107xC)
		388	static const uint8_t aPLLMULFactorTable[14U] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 13};
		389	static const uint8_t aPredivFactorTable[16U] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16};
		390
		391	uint32_t prediv1 = 0U, pllclk = 0U, pllmul = 0U;
		392	uint32_t pll2mul = 0U, pll3mul = 0U, prediv2 = 0U;
		393	#endif /* STM32F105xC \|\| STM32F107xC */
		394	#if defined(STM32F102x6) \|\| defined(STM32F102xB) \|\| defined(STM32F103x6) \|\| \
		395	defined(STM32F103xB) \|\| defined(STM32F103xE) \|\| defined(STM32F103xG)
		396	static const uint8_t aPLLMULFactorTable[16U] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16};
		397	static const uint8_t aPredivFactorTable[2U] = {1, 2};
		398
		399	uint32_t prediv1 = 0U, pllclk = 0U, pllmul = 0U;
		400	#endif /* STM32F102x6 \|\| STM32F102xB \|\| STM32F103x6 \|\| STM32F103xB \|\| STM32F103xE \|\| STM32F103xG */
		401	uint32_t temp_reg = 0U, frequency = 0U;
		402
		403	/* Check the parameters */
		404	assert_param(IS_RCC_PERIPHCLOCK(PeriphClk));
		405
		406	switch (PeriphClk)
		407	{
		408	#if defined(STM32F102x6) \|\| defined(STM32F102xB) \|\| defined(STM32F103x6)\
		409	\|\| defined(STM32F103xB) \|\| defined(STM32F103xE) \|\| defined(STM32F103xG)\
		410	\|\| defined(STM32F105xC) \|\| defined(STM32F107xC)
		411	case RCC_PERIPHCLK_USB:
		412	{
		413	/* Get RCC configuration ------------------------------------------------------*/
		414	temp_reg = RCC->CFGR;
		415
		416	/* Check if PLL is enabled */
		417	if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLON))
		418	{
		419	pllmul = aPLLMULFactorTable[(uint32_t)(temp_reg & RCC_CFGR_PLLMULL) >> RCC_CFGR_PLLMULL_Pos];
		420	if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2)
		421	{
		422	#if defined(STM32F105xC) \|\| defined(STM32F107xC) \|\| defined(STM32F100xB)\
		423	\|\| defined(STM32F100xE)
		424	prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> RCC_CFGR2_PREDIV1_Pos];
		425	#else
		426	prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> RCC_CFGR_PLLXTPRE_Pos];
		427	#endif /* STM32F105xC \|\| STM32F107xC \|\| STM32F100xB \|\| STM32F100xE */
		428
		429	#if defined(STM32F105xC) \|\| defined(STM32F107xC)
		430	if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC))
		431	{
		432	/* PLL2 selected as Prediv1 source */
		433	/* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */
		434	prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1;
		435	pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> RCC_CFGR2_PLL2MUL_Pos) + 2;
		436	pllclk = (uint32_t)((((HSE_VALUE / prediv2) * pll2mul) / prediv1) * pllmul);
		437	}
		438	else
		439	{
		440	/* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */
		441	pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul);
		442	}
		443
		444	/* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */
		445	/* In this case need to divide pllclk by 2 */
		446	if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> RCC_CFGR_PLLMULL_Pos])
		447	{
		448	pllclk = pllclk / 2;
		449	}
		450	#else
		451	if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2)
		452	{
		453	/* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */
		454	pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul);
		455	}
		456	#endif /* STM32F105xC \|\| STM32F107xC */
		457	}
		458	else
		459	{
		460	/* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
		461	pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul);
		462	}
		463
		464	/* Calcul of the USB frequency*/
		465	#if defined(STM32F105xC) \|\| defined(STM32F107xC)
		466	/* USBCLK = PLLVCO = (2 x PLLCLK) / USB prescaler */
		467	if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL_DIV2)
		468	{
		469	/* Prescaler of 2 selected for USB */
		470	frequency = pllclk;
		471	}
		472	else
		473	{
		474	/* Prescaler of 3 selected for USB */
		475	frequency = (2 * pllclk) / 3;
		476	}
		477	#else
		478	/* USBCLK = PLLCLK / USB prescaler */
		479	if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL)
		480	{
		481	/* No prescaler selected for USB */
		482	frequency = pllclk;
		483	}
		484	else
		485	{
		486	/* Prescaler of 1.5 selected for USB */
		487	frequency = (pllclk * 2) / 3;
		488	}
		489	#endif
		490	}
		491	break;
		492	}
		493	#endif /* STM32F102x6 \|\| STM32F102xB \|\| STM32F103x6 \|\| STM32F103xB \|\| STM32F103xE \|\| STM32F103xG \|\| STM32F105xC \|\| STM32F107xC */
		494	#if defined(STM32F103xE) \|\| defined(STM32F103xG) \|\| defined(STM32F105xC) \|\| defined(STM32F107xC)
		495	case RCC_PERIPHCLK_I2S2:
		496	{
		497	#if defined(STM32F103xE) \|\| defined(STM32F103xG)
		498	/* SYSCLK used as source clock for I2S2 */
		499	frequency = HAL_RCC_GetSysClockFreq();
		500	#else
		501	if (__HAL_RCC_GET_I2S2_SOURCE() == RCC_I2S2CLKSOURCE_SYSCLK)
		502	{
		503	/* SYSCLK used as source clock for I2S2 */
		504	frequency = HAL_RCC_GetSysClockFreq();
		505	}
		506	else
		507	{
		508	/* Check if PLLI2S is enabled */
		509	if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON))
		510	{
		511	/* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */
		512	prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1;
		513	pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> RCC_CFGR2_PLL3MUL_Pos) + 2;
		514	frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul));
		515	}
		516	}
		517	#endif /* STM32F103xE \|\| STM32F103xG */
		518	break;
		519	}
		520	case RCC_PERIPHCLK_I2S3:
		521	{
		522	#if defined(STM32F103xE) \|\| defined(STM32F103xG)
		523	/* SYSCLK used as source clock for I2S3 */
		524	frequency = HAL_RCC_GetSysClockFreq();
		525	#else
		526	if (__HAL_RCC_GET_I2S3_SOURCE() == RCC_I2S3CLKSOURCE_SYSCLK)
		527	{
		528	/* SYSCLK used as source clock for I2S3 */
		529	frequency = HAL_RCC_GetSysClockFreq();
		530	}
		531	else
		532	{
		533	/* Check if PLLI2S is enabled */
		534	if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON))
		535	{
		536	/* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */
		537	prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> RCC_CFGR2_PREDIV2_Pos) + 1;
		538	pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> RCC_CFGR2_PLL3MUL_Pos) + 2;
		539	frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul));
		540	}
		541	}
		542	#endif /* STM32F103xE \|\| STM32F103xG */
		543	break;
		544	}
		545	#endif /* STM32F103xE \|\| STM32F103xG \|\| STM32F105xC \|\| STM32F107xC */
		546	case RCC_PERIPHCLK_RTC:
		547	{
		548	/* Get RCC BDCR configuration ------------------------------------------------------*/
		549	temp_reg = RCC->BDCR;
		550
		551	/* Check if LSE is ready if RTC clock selection is LSE */
		552	if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSERDY)))
		553	{
		554	frequency = LSE_VALUE;
		555	}
		556	/* Check if LSI is ready if RTC clock selection is LSI */
		557	else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)))
		558	{
		559	frequency = LSI_VALUE;
		560	}
		561	else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_HSE_DIV128) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)))
		562	{
		563	frequency = HSE_VALUE / 128U;
		564	}
		565	/* Clock not enabled for RTC*/
		566	else
		567	{
		568	/* nothing to do: frequency already initialized to 0U */
		569	}
		570	break;
		571	}
		572	case RCC_PERIPHCLK_ADC:
		573	{
		574	frequency = HAL_RCC_GetPCLK2Freq() / (((__HAL_RCC_GET_ADC_SOURCE() >> RCC_CFGR_ADCPRE_Pos) + 1) * 2);
		575	break;
		576	}
		577	default:
		578	{
		579	break;
		580	}
		581	}
		582	return (frequency);
		583	}
		584
		585	/**
		586	* @}
		587	*/
		588
		589	#if defined(STM32F105xC) \|\| defined(STM32F107xC)
		590	/** @defgroup RCCEx_Exported_Functions_Group2 PLLI2S Management function
		591	* @brief PLLI2S Management functions
		592	*
		593	@verbatim
		594	===============================================================================
		595	##### Extended PLLI2S Management functions #####
		596	===============================================================================
		597	[..]
		598	This subsection provides a set of functions allowing to control the PLLI2S
		599	activation or deactivation
		600	@endverbatim
		601	* @{
		602	*/
		603
		604	/**
		605	* @brief Enable PLLI2S
		606	* @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that
		607	* contains the configuration information for the PLLI2S
		608	* @note The PLLI2S configuration not modified if used by I2S2 or I2S3 Interface.
		609	* @retval HAL status
		610	*/
		611	HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit)
		612	{
		613	uint32_t tickstart = 0U;
		614
		615	/* Check that PLL I2S has not been already enabled by I2S2 or I2S3*/
		616	if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
		617	{
		618	/* Check the parameters */
		619	assert_param(IS_RCC_PLLI2S_MUL(PLLI2SInit->PLLI2SMUL));
		620	assert_param(IS_RCC_HSE_PREDIV2(PLLI2SInit->HSEPrediv2Value));
		621
		622	/* Prediv2 can be written only when the PLL2 is disabled. */
		623	/* Return an error only if new value is different from the programmed value */
		624	if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2ON) && \
		625	(__HAL_RCC_HSE_GET_PREDIV2() != PLLI2SInit->HSEPrediv2Value))
		626	{
		627	return HAL_ERROR;
		628	}
		629
		630	/* Disable the main PLLI2S. */
		631	__HAL_RCC_PLLI2S_DISABLE();
		632
		633	/* Get Start Tick*/
		634	tickstart = HAL_GetTick();
		635
		636	/* Wait till PLLI2S is ready */
		637	while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
		638	{
		639	if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
		640	{
		641	return HAL_TIMEOUT;
		642	}
		643	}
		644
		645	/* Configure the HSE prediv2 factor --------------------------------*/
		646	__HAL_RCC_HSE_PREDIV2_CONFIG(PLLI2SInit->HSEPrediv2Value);
		647
		648
		649	/* Configure the main PLLI2S multiplication factors. */
		650	__HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SMUL);
		651
		652	/* Enable the main PLLI2S. */
		653	__HAL_RCC_PLLI2S_ENABLE();
		654
		655	/* Get Start Tick*/
		656	tickstart = HAL_GetTick();
		657
		658	/* Wait till PLLI2S is ready */
		659	while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
		660	{
		661	if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
		662	{
		663	return HAL_TIMEOUT;
		664	}
		665	}
		666	}
		667	else
		668	{
		669	/* PLLI2S cannot be modified as already used by I2S2 or I2S3 */
		670	return HAL_ERROR;
		671	}
		672
		673	return HAL_OK;
		674	}
		675
		676	/**
		677	* @brief Disable PLLI2S
		678	* @note PLLI2S is not disabled if used by I2S2 or I2S3 Interface.
		679	* @retval HAL status
		680	*/
		681	HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void)
		682	{
		683	uint32_t tickstart = 0U;
		684
		685	/* Disable PLL I2S as not requested by I2S2 or I2S3*/
		686	if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
		687	{
		688	/* Disable the main PLLI2S. */
		689	__HAL_RCC_PLLI2S_DISABLE();
		690
		691	/* Get Start Tick*/
		692	tickstart = HAL_GetTick();
		693
		694	/* Wait till PLLI2S is ready */
		695	while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
		696	{
		697	if ((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
		698	{
		699	return HAL_TIMEOUT;
		700	}
		701	}
		702	}
		703	else
		704	{
		705	/* PLLI2S is currently used by I2S2 or I2S3. Cannot be disabled.*/
		706	return HAL_ERROR;
		707	}
		708
		709	return HAL_OK;
		710	}
		711
		712	/**
		713	* @}
		714	*/
		715
		716	/** @defgroup RCCEx_Exported_Functions_Group3 PLL2 Management function
		717	* @brief PLL2 Management functions
		718	*
		719	@verbatim
		720	===============================================================================
		721	##### Extended PLL2 Management functions #####
		722	===============================================================================
		723	[..]
		724	This subsection provides a set of functions allowing to control the PLL2
		725	activation or deactivation
		726	@endverbatim
		727	* @{
		728	*/
		729
		730	/**
		731	* @brief Enable PLL2
		732	* @param PLL2Init pointer to an RCC_PLL2InitTypeDef structure that
		733	* contains the configuration information for the PLL2
		734	* @note The PLL2 configuration not modified if used indirectly as system clock.
		735	* @retval HAL status
		736	*/
		737	HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init)
		738	{
		739	uint32_t tickstart = 0U;
		740
		741	/* This bit can not be cleared if the PLL2 clock is used indirectly as system
		742	clock (i.e. it is used as PLL clock entry that is used as system clock). */
		743	if ((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \
		744	(__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \
		745	((READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2))
		746	{
		747	return HAL_ERROR;
		748	}
		749	else
		750	{
		751	/* Check the parameters */
		752	assert_param(IS_RCC_PLL2_MUL(PLL2Init->PLL2MUL));
		753	assert_param(IS_RCC_HSE_PREDIV2(PLL2Init->HSEPrediv2Value));
		754
		755	/* Prediv2 can be written only when the PLLI2S is disabled. */
		756	/* Return an error only if new value is different from the programmed value */
		757	if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON) && \
		758	(__HAL_RCC_HSE_GET_PREDIV2() != PLL2Init->HSEPrediv2Value))
		759	{
		760	return HAL_ERROR;
		761	}
		762
		763	/* Disable the main PLL2. */
		764	__HAL_RCC_PLL2_DISABLE();
		765
		766	/* Get Start Tick*/
		767	tickstart = HAL_GetTick();
		768
		769	/* Wait till PLL2 is disabled */
		770	while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET)
		771	{
		772	if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE)
		773	{
		774	return HAL_TIMEOUT;
		775	}
		776	}
		777
		778	/* Configure the HSE prediv2 factor --------------------------------*/
		779	__HAL_RCC_HSE_PREDIV2_CONFIG(PLL2Init->HSEPrediv2Value);
		780
		781	/* Configure the main PLL2 multiplication factors. */
		782	__HAL_RCC_PLL2_CONFIG(PLL2Init->PLL2MUL);
		783
		784	/* Enable the main PLL2. */
		785	__HAL_RCC_PLL2_ENABLE();
		786
		787	/* Get Start Tick*/
		788	tickstart = HAL_GetTick();
		789
		790	/* Wait till PLL2 is ready */
		791	while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET)
		792	{
		793	if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE)
		794	{
		795	return HAL_TIMEOUT;
		796	}
		797	}
		798	}
		799
		800	return HAL_OK;
		801	}
		802
		803	/**
		804	* @brief Disable PLL2
		805	* @note PLL2 is not disabled if used indirectly as system clock.
		806	* @retval HAL status
		807	*/
		808	HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void)
		809	{
		810	uint32_t tickstart = 0U;
		811
		812	/* This bit can not be cleared if the PLL2 clock is used indirectly as system
		813	clock (i.e. it is used as PLL clock entry that is used as system clock). */
		814	if ((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \
		815	(__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \
		816	((READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2))
		817	{
		818	return HAL_ERROR;
		819	}
		820	else
		821	{
		822	/* Disable the main PLL2. */
		823	__HAL_RCC_PLL2_DISABLE();
		824
		825	/* Get Start Tick*/
		826	tickstart = HAL_GetTick();
		827
		828	/* Wait till PLL2 is disabled */
		829	while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET)
		830	{
		831	if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE)
		832	{
		833	return HAL_TIMEOUT;
		834	}
		835	}
		836	}
		837
		838	return HAL_OK;
		839	}
		840
		841	/**
		842	* @}
		843	*/
		844	#endif /* STM32F105xC \|\| STM32F107xC */
		845
		846	/**
		847	* @}
		848	*/
		849
		850	/**
		851	* @}
		852	*/
		853
		854	#endif /* HAL_RCC_MODULE_ENABLED */
		855
		856	/**
		857	* @}
		858	*/
		859
		860

Subversion Repositories EDIS_Ignition

(root)/trunk/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c – Rev 18