WebSVN – EDIS_Ignition – Blame – /trunk/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c

Rev	Author	Line No.	Line
18	mjames	1	/**
		2	******************************************************************************
		3	* @file stm32f1xx_hal_flash_ex.c
		4	* @author MCD Application Team
		5	* @brief Extended FLASH HAL module driver.
		6	*
		7	* This file provides firmware functions to manage the following
		8	* functionalities of the FLASH peripheral:
		9	* + Extended Initialization/de-initialization functions
		10	* + Extended I/O operation functions
		11	* + Extended Peripheral Control functions
		12	*
		13	@verbatim
		14	==============================================================================
		15	##### Flash peripheral extended features #####
		16	==============================================================================
		17
		18	##### How to use this driver #####
		19	==============================================================================
		20	[..] This driver provides functions to configure and program the FLASH memory
		21	of all STM32F1xxx devices. It includes
		22
		23	(++) Set/Reset the write protection
		24	(++) Program the user Option Bytes
		25	(++) Get the Read protection Level
		26
		27	@endverbatim
		28	******************************************************************************
		29	* @attention
		30	*
		31	* Copyright (c) 2016 STMicroelectronics.
		32	* All rights reserved.
		33	*
		34	* This software is licensed under terms that can be found in the LICENSE file in
		35	* the root directory of this software component.
		36	* If no LICENSE file comes with this software, it is provided AS-IS.
		37	******************************************************************************
		38	*/
		39
		40	/* Includes ------------------------------------------------------------------*/
		41	#include "stm32f1xx_hal.h"
		42
		43	/** @addtogroup STM32F1xx_HAL_Driver
		44	* @{
		45	*/
		46	#ifdef HAL_FLASH_MODULE_ENABLED
		47
		48	/** @addtogroup FLASH
		49	* @{
		50	*/
		51	/** @addtogroup FLASH_Private_Variables
		52	* @{
		53	*/
		54	/* Variables used for Erase pages under interruption*/
		55	extern FLASH_ProcessTypeDef pFlash;
		56	/**
		57	* @}
		58	*/
		59
		60	/**
		61	* @}
		62	*/
		63
		64	/** @defgroup FLASHEx FLASHEx
		65	* @brief FLASH HAL Extension module driver
		66	* @{
		67	*/
		68
		69	/* Private typedef -----------------------------------------------------------*/
		70	/* Private define ------------------------------------------------------------*/
		71	/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants
		72	* @{
		73	*/
		74	#define FLASH_POSITION_IWDGSW_BIT FLASH_OBR_IWDG_SW_Pos
		75	#define FLASH_POSITION_OB_USERDATA0_BIT FLASH_OBR_DATA0_Pos
		76	#define FLASH_POSITION_OB_USERDATA1_BIT FLASH_OBR_DATA1_Pos
		77	/**
		78	* @}
		79	*/
		80
		81	/* Private macro -------------------------------------------------------------*/
		82	/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros
		83	* @{
		84	*/
		85	/**
		86	* @}
		87	*/
		88
		89	/* Private variables ---------------------------------------------------------*/
		90	/* Private function prototypes -----------------------------------------------*/
		91	/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
		92	* @{
		93	*/
		94	/* Erase operations */
		95	static void FLASH_MassErase(uint32_t Banks);
		96	void FLASH_PageErase(uint32_t PageAddress);
		97
		98	/* Option bytes control */
		99	static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage);
		100	static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage);
		101	static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
		102	static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig);
		103	static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data);
		104	static uint32_t FLASH_OB_GetWRP(void);
		105	static uint32_t FLASH_OB_GetRDP(void);
		106	static uint8_t FLASH_OB_GetUser(void);
		107
		108	/**
		109	* @}
		110	*/
		111
		112	/* Exported functions ---------------------------------------------------------*/
		113	/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
		114	* @{
		115	*/
		116
		117	/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions
		118	* @brief FLASH Memory Erasing functions
		119	*
		120	@verbatim
		121	==============================================================================
		122	##### FLASH Erasing Programming functions #####
		123	==============================================================================
		124
		125	[..] The FLASH Memory Erasing functions, includes the following functions:
		126	(+) HAL_FLASHEx_Erase: return only when erase has been done
		127	(+) HAL_FLASHEx_Erase_IT: end of erase is done when HAL_FLASH_EndOfOperationCallback
		128	is called with parameter 0xFFFFFFFF
		129
		130	[..] Any operation of erase should follow these steps:
		131	(#) Call the HAL_FLASH_Unlock() function to enable the flash control register and
		132	program memory access.
		133	(#) Call the desired function to erase page.
		134	(#) Call the HAL_FLASH_Lock() to disable the flash program memory access
		135	(recommended to protect the FLASH memory against possible unwanted operation).
		136
		137	@endverbatim
		138	* @{
		139	*/
		140
		141
		142	/**
		143	* @brief Perform a mass erase or erase the specified FLASH memory pages
		144	* @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
		145	* must be called before.
		146	* Call the @ref HAL_FLASH_Lock() to disable the flash memory access
		147	* (recommended to protect the FLASH memory against possible unwanted operation)
		148	* @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
		149	* contains the configuration information for the erasing.
		150	*
		151	* @param[out] PageError pointer to variable that
		152	* contains the configuration information on faulty page in case of error
		153	* (0xFFFFFFFF means that all the pages have been correctly erased)
		154	*
		155	* @retval HAL_StatusTypeDef HAL Status
		156	*/
		157	HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef pEraseInit, uint32_t PageError)
		158	{
		159	HAL_StatusTypeDef status = HAL_ERROR;
		160	uint32_t address = 0U;
		161
		162	/* Process Locked */
		163	__HAL_LOCK(&pFlash);
		164
		165	/* Check the parameters */
		166	assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
		167
		168	if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
		169	{
		170	#if defined(FLASH_BANK2_END)
		171	if (pEraseInit->Banks == FLASH_BANK_BOTH)
		172	{
		173	/* Mass Erase requested for Bank1 and Bank2 */
		174	/* Wait for last operation to be completed */
		175	if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \
		176	(FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK))
		177	{
		178	/Mass erase to be done/
		179	FLASH_MassErase(FLASH_BANK_BOTH);
		180
		181	/* Wait for last operation to be completed */
		182	if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \
		183	(FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK))
		184	{
		185	status = HAL_OK;
		186	}
		187
		188	/* If the erase operation is completed, disable the MER Bit */
		189	CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
		190	CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER);
		191	}
		192	}
		193	else if (pEraseInit->Banks == FLASH_BANK_2)
		194	{
		195	/* Mass Erase requested for Bank2 */
		196	/* Wait for last operation to be completed */
		197	if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
		198	{
		199	/Mass erase to be done/
		200	FLASH_MassErase(FLASH_BANK_2);
		201
		202	/* Wait for last operation to be completed */
		203	status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE);
		204
		205	/* If the erase operation is completed, disable the MER Bit */
		206	CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER);
		207	}
		208	}
		209	else
		210	#endif /* FLASH_BANK2_END */
		211	{
		212	/* Mass Erase requested for Bank1 */
		213	/* Wait for last operation to be completed */
		214	if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
		215	{
		216	/Mass erase to be done/
		217	FLASH_MassErase(FLASH_BANK_1);
		218
		219	/* Wait for last operation to be completed */
		220	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		221
		222	/* If the erase operation is completed, disable the MER Bit */
		223	CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
		224	}
		225	}
		226	}
		227	else
		228	{
		229	/* Page Erase is requested */
		230	/* Check the parameters */
		231	assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
		232	assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
		233
		234	#if defined(FLASH_BANK2_END)
		235	/* Page Erase requested on address located on bank2 */
		236	if(pEraseInit->PageAddress > FLASH_BANK1_END)
		237	{
		238	/* Wait for last operation to be completed */
		239	if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
		240	{
		241	/Initialization of PageError variable/
		242	*PageError = 0xFFFFFFFFU;
		243
		244	/* Erase by page by page to be done*/
		245	for(address = pEraseInit->PageAddress;
		246	address < (pEraseInit->PageAddress + (pEraseInit->NbPages)*FLASH_PAGE_SIZE);
		247	address += FLASH_PAGE_SIZE)
		248	{
		249	FLASH_PageErase(address);
		250
		251	/* Wait for last operation to be completed */
		252	status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE);
		253
		254	/* If the erase operation is completed, disable the PER Bit */
		255	CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER);
		256
		257	if (status != HAL_OK)
		258	{
		259	/* In case of error, stop erase procedure and return the faulty address */
		260	*PageError = address;
		261	break;
		262	}
		263	}
		264	}
		265	}
		266	else
		267	#endif /* FLASH_BANK2_END */
		268	{
		269	/* Page Erase requested on address located on bank1 */
		270	/* Wait for last operation to be completed */
		271	if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
		272	{
		273	/Initialization of PageError variable/
		274	*PageError = 0xFFFFFFFFU;
		275
		276	/* Erase page by page to be done*/
		277	for(address = pEraseInit->PageAddress;
		278	address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress);
		279	address += FLASH_PAGE_SIZE)
		280	{
		281	FLASH_PageErase(address);
		282
		283	/* Wait for last operation to be completed */
		284	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		285
		286	/* If the erase operation is completed, disable the PER Bit */
		287	CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
		288
		289	if (status != HAL_OK)
		290	{
		291	/* In case of error, stop erase procedure and return the faulty address */
		292	*PageError = address;
		293	break;
		294	}
		295	}
		296	}
		297	}
		298	}
		299
		300	/* Process Unlocked */
		301	__HAL_UNLOCK(&pFlash);
		302
		303	return status;
		304	}
		305
		306	/**
		307	* @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled
		308	* @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
		309	* must be called before.
		310	* Call the @ref HAL_FLASH_Lock() to disable the flash memory access
		311	* (recommended to protect the FLASH memory against possible unwanted operation)
		312	* @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
		313	* contains the configuration information for the erasing.
		314	*
		315	* @retval HAL_StatusTypeDef HAL Status
		316	*/
		317	HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
		318	{
		319	HAL_StatusTypeDef status = HAL_OK;
		320
		321	/* Process Locked */
		322	__HAL_LOCK(&pFlash);
		323
		324	/* If procedure already ongoing, reject the next one */
		325	if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
		326	{
		327	return HAL_ERROR;
		328	}
		329
		330	/* Check the parameters */
		331	assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
		332
		333	/* Enable End of FLASH Operation and Error source interrupts */
		334	__HAL_FLASH_ENABLE_IT(FLASH_IT_EOP \| FLASH_IT_ERR);
		335
		336	#if defined(FLASH_BANK2_END)
		337	/* Enable End of FLASH Operation and Error source interrupts */
		338	__HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 \| FLASH_IT_ERR_BANK2);
		339
		340	#endif
		341	if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
		342	{
		343	/Mass erase to be done/
		344	pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
		345	FLASH_MassErase(pEraseInit->Banks);
		346	}
		347	else
		348	{
		349	/* Erase by page to be done*/
		350
		351	/* Check the parameters */
		352	assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
		353	assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
		354
		355	pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE;
		356	pFlash.DataRemaining = pEraseInit->NbPages;
		357	pFlash.Address = pEraseInit->PageAddress;
		358
		359	/Erase 1st page and wait for IT/
		360	FLASH_PageErase(pEraseInit->PageAddress);
		361	}
		362
		363	return status;
		364	}
		365
		366	/**
		367	* @}
		368	*/
		369
		370	/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions
		371	* @brief Option Bytes Programming functions
		372	*
		373	@verbatim
		374	==============================================================================
		375	##### Option Bytes Programming functions #####
		376	==============================================================================
		377	[..]
		378	This subsection provides a set of functions allowing to control the FLASH
		379	option bytes operations.
		380
		381	@endverbatim
		382	* @{
		383	*/
		384
		385	/**
		386	* @brief Erases the FLASH option bytes.
		387	* @note This functions erases all option bytes except the Read protection (RDP).
		388	* The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
		389	* The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
		390	* The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
		391	* (system reset will occur)
		392	* @retval HAL status
		393	*/
		394
		395	HAL_StatusTypeDef HAL_FLASHEx_OBErase(void)
		396	{
		397	uint8_t rdptmp = OB_RDP_LEVEL_0;
		398	HAL_StatusTypeDef status = HAL_ERROR;
		399
		400	/* Get the actual read protection Option Byte value */
		401	rdptmp = FLASH_OB_GetRDP();
		402
		403	/* Wait for last operation to be completed */
		404	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		405
		406	if(status == HAL_OK)
		407	{
		408	/* Clean the error context */
		409	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
		410
		411	/* If the previous operation is completed, proceed to erase the option bytes */
		412	SET_BIT(FLASH->CR, FLASH_CR_OPTER);
		413	SET_BIT(FLASH->CR, FLASH_CR_STRT);
		414
		415	/* Wait for last operation to be completed */
		416	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		417
		418	/* If the erase operation is completed, disable the OPTER Bit */
		419	CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
		420
		421	if(status == HAL_OK)
		422	{
		423	/* Restore the last read protection Option Byte value */
		424	status = FLASH_OB_RDP_LevelConfig(rdptmp);
		425	}
		426	}
		427
		428	/* Return the erase status */
		429	return status;
		430	}
		431
		432	/**
		433	* @brief Program option bytes
		434	* @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
		435	* The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
		436	* The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
		437	* (system reset will occur)
		438	*
		439	* @param pOBInit pointer to an FLASH_OBInitStruct structure that
		440	* contains the configuration information for the programming.
		441	*
		442	* @retval HAL_StatusTypeDef HAL Status
		443	*/
		444	HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
		445	{
		446	HAL_StatusTypeDef status = HAL_ERROR;
		447
		448	/* Process Locked */
		449	__HAL_LOCK(&pFlash);
		450
		451	/* Check the parameters */
		452	assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
		453
		454	/* Write protection configuration */
		455	if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
		456	{
		457	assert_param(IS_WRPSTATE(pOBInit->WRPState));
		458	if (pOBInit->WRPState == OB_WRPSTATE_ENABLE)
		459	{
		460	/* Enable of Write protection on the selected page */
		461	status = FLASH_OB_EnableWRP(pOBInit->WRPPage);
		462	}
		463	else
		464	{
		465	/* Disable of Write protection on the selected page */
		466	status = FLASH_OB_DisableWRP(pOBInit->WRPPage);
		467	}
		468	if (status != HAL_OK)
		469	{
		470	/* Process Unlocked */
		471	__HAL_UNLOCK(&pFlash);
		472	return status;
		473	}
		474	}
		475
		476	/* Read protection configuration */
		477	if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
		478	{
		479	status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
		480	if (status != HAL_OK)
		481	{
		482	/* Process Unlocked */
		483	__HAL_UNLOCK(&pFlash);
		484	return status;
		485	}
		486	}
		487
		488	/* USER configuration */
		489	if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
		490	{
		491	status = FLASH_OB_UserConfig(pOBInit->USERConfig);
		492	if (status != HAL_OK)
		493	{
		494	/* Process Unlocked */
		495	__HAL_UNLOCK(&pFlash);
		496	return status;
		497	}
		498	}
		499
		500	/* DATA configuration*/
		501	if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA)
		502	{
		503	status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData);
		504	if (status != HAL_OK)
		505	{
		506	/* Process Unlocked */
		507	__HAL_UNLOCK(&pFlash);
		508	return status;
		509	}
		510	}
		511
		512	/* Process Unlocked */
		513	__HAL_UNLOCK(&pFlash);
		514
		515	return status;
		516	}
		517
		518	/**
		519	* @brief Get the Option byte configuration
		520	* @param pOBInit pointer to an FLASH_OBInitStruct structure that
		521	* contains the configuration information for the programming.
		522	*
		523	* @retval None
		524	*/
		525	void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
		526	{
		527	pOBInit->OptionType = OPTIONBYTE_WRP \| OPTIONBYTE_RDP \| OPTIONBYTE_USER;
		528
		529	/Get WRP/
		530	pOBInit->WRPPage = FLASH_OB_GetWRP();
		531
		532	/Get RDP Level/
		533	pOBInit->RDPLevel = FLASH_OB_GetRDP();
		534
		535	/Get USER/
		536	pOBInit->USERConfig = FLASH_OB_GetUser();
		537	}
		538
		539	/**
		540	* @brief Get the Option byte user data
		541	* @param DATAAdress Address of the option byte DATA
		542	* This parameter can be one of the following values:
		543	* @arg @ref OB_DATA_ADDRESS_DATA0
		544	* @arg @ref OB_DATA_ADDRESS_DATA1
		545	* @retval Value programmed in USER data
		546	*/
		547	uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress)
		548	{
		549	uint32_t value = 0;
		550
		551	if (DATAAdress == OB_DATA_ADDRESS_DATA0)
		552	{
		553	/* Get value programmed in OB USER Data0 */
		554	value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT;
		555	}
		556	else
		557	{
		558	/* Get value programmed in OB USER Data1 */
		559	value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT;
		560	}
		561
		562	return value;
		563	}
		564
		565	/**
		566	* @}
		567	*/
		568
		569	/**
		570	* @}
		571	*/
		572
		573	/** @addtogroup FLASHEx_Private_Functions
		574	* @{
		575	*/
		576
		577	/**
		578	* @brief Full erase of FLASH memory Bank
		579	* @param Banks Banks to be erased
		580	* This parameter can be one of the following values:
		581	* @arg @ref FLASH_BANK_1 Bank1 to be erased
		582	@if STM32F101xG
		583	* @arg @ref FLASH_BANK_2 Bank2 to be erased
		584	* @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased
		585	@endif
		586	@if STM32F103xG
		587	* @arg @ref FLASH_BANK_2 Bank2 to be erased
		588	* @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased
		589	@endif
		590	*
		591	* @retval None
		592	*/
		593	static void FLASH_MassErase(uint32_t Banks)
		594	{
		595	/* Check the parameters */
		596	assert_param(IS_FLASH_BANK(Banks));
		597
		598	/* Clean the error context */
		599	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
		600
		601	#if defined(FLASH_BANK2_END)
		602	if(Banks == FLASH_BANK_BOTH)
		603	{
		604	/* bank1 & bank2 will be erased*/
		605	SET_BIT(FLASH->CR, FLASH_CR_MER);
		606	SET_BIT(FLASH->CR2, FLASH_CR2_MER);
		607	SET_BIT(FLASH->CR, FLASH_CR_STRT);
		608	SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
		609	}
		610	else if(Banks == FLASH_BANK_2)
		611	{
		612	/Only bank2 will be erased/
		613	SET_BIT(FLASH->CR2, FLASH_CR2_MER);
		614	SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
		615	}
		616	else
		617	{
		618	#endif /* FLASH_BANK2_END */
		619	#if !defined(FLASH_BANK2_END)
		620	/* Prevent unused argument(s) compilation warning */
		621	UNUSED(Banks);
		622	#endif /* FLASH_BANK2_END */
		623	/* Only bank1 will be erased*/
		624	SET_BIT(FLASH->CR, FLASH_CR_MER);
		625	SET_BIT(FLASH->CR, FLASH_CR_STRT);
		626	#if defined(FLASH_BANK2_END)
		627	}
		628	#endif /* FLASH_BANK2_END */
		629	}
		630
		631	/**
		632	* @brief Enable the write protection of the desired pages
		633	* @note An option byte erase is done automatically in this function.
		634	* @note When the memory read protection level is selected (RDP level = 1),
		635	* it is not possible to program or erase the flash page i if
		636	* debug features are connected or boot code is executed in RAM, even if nWRPi = 1
		637	*
		638	* @param WriteProtectPage specifies the page(s) to be write protected.
		639	* The value of this parameter depend on device used within the same series
		640	* @retval HAL status
		641	*/
		642	static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage)
		643	{
		644	HAL_StatusTypeDef status = HAL_OK;
		645	uint16_t WRP0_Data = 0xFFFF;
		646	#if defined(FLASH_WRP1_WRP1)
		647	uint16_t WRP1_Data = 0xFFFF;
		648	#endif /* FLASH_WRP1_WRP1 */
		649	#if defined(FLASH_WRP2_WRP2)
		650	uint16_t WRP2_Data = 0xFFFF;
		651	#endif /* FLASH_WRP2_WRP2 */
		652	#if defined(FLASH_WRP3_WRP3)
		653	uint16_t WRP3_Data = 0xFFFF;
		654	#endif /* FLASH_WRP3_WRP3 */
		655
		656	/* Check the parameters */
		657	assert_param(IS_OB_WRP(WriteProtectPage));
		658
		659	/* Get current write protected pages and the new pages to be protected ******/
		660	WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) \| WriteProtectPage));
		661
		662	#if defined(OB_WRP_PAGES0TO15MASK)
		663	WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
		664	#elif defined(OB_WRP_PAGES0TO31MASK)
		665	WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
		666	#endif /* OB_WRP_PAGES0TO31MASK */
		667
		668	#if defined(OB_WRP_PAGES16TO31MASK)
		669	WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
		670	#elif defined(OB_WRP_PAGES32TO63MASK)
		671	WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U);
		672	#endif /* OB_WRP_PAGES32TO63MASK */
		673
		674	#if defined(OB_WRP_PAGES64TO95MASK)
		675	WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16U);
		676	#endif /* OB_WRP_PAGES64TO95MASK */
		677	#if defined(OB_WRP_PAGES32TO47MASK)
		678	WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
		679	#endif /* OB_WRP_PAGES32TO47MASK */
		680
		681	#if defined(OB_WRP_PAGES96TO127MASK)
		682	WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24U);
		683	#elif defined(OB_WRP_PAGES48TO255MASK)
		684	WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U);
		685	#elif defined(OB_WRP_PAGES48TO511MASK)
		686	WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24U);
		687	#elif defined(OB_WRP_PAGES48TO127MASK)
		688	WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U);
		689	#endif /* OB_WRP_PAGES96TO127MASK */
		690
		691	/* Wait for last operation to be completed */
		692	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		693
		694	if(status == HAL_OK)
		695	{
		696	/* Clean the error context */
		697	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
		698
		699	/* To be able to write again option byte, need to perform a option byte erase */
		700	status = HAL_FLASHEx_OBErase();
		701	if (status == HAL_OK)
		702	{
		703	/* Enable write protection */
		704	SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
		705
		706	#if defined(FLASH_WRP0_WRP0)
		707	if(WRP0_Data != 0xFFU)
		708	{
		709	OB->WRP0 &= WRP0_Data;
		710
		711	/* Wait for last operation to be completed */
		712	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		713	}
		714	#endif /* FLASH_WRP0_WRP0 */
		715
		716	#if defined(FLASH_WRP1_WRP1)
		717	if((status == HAL_OK) && (WRP1_Data != 0xFFU))
		718	{
		719	OB->WRP1 &= WRP1_Data;
		720
		721	/* Wait for last operation to be completed */
		722	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		723	}
		724	#endif /* FLASH_WRP1_WRP1 */
		725
		726	#if defined(FLASH_WRP2_WRP2)
		727	if((status == HAL_OK) && (WRP2_Data != 0xFFU))
		728	{
		729	OB->WRP2 &= WRP2_Data;
		730
		731	/* Wait for last operation to be completed */
		732	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		733	}
		734	#endif /* FLASH_WRP2_WRP2 */
		735
		736	#if defined(FLASH_WRP3_WRP3)
		737	if((status == HAL_OK) && (WRP3_Data != 0xFFU))
		738	{
		739	OB->WRP3 &= WRP3_Data;
		740
		741	/* Wait for last operation to be completed */
		742	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		743	}
		744	#endif /* FLASH_WRP3_WRP3 */
		745
		746	/* if the program operation is completed, disable the OPTPG Bit */
		747	CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
		748	}
		749	}
		750
		751	return status;
		752	}
		753
		754	/**
		755	* @brief Disable the write protection of the desired pages
		756	* @note An option byte erase is done automatically in this function.
		757	* @note When the memory read protection level is selected (RDP level = 1),
		758	* it is not possible to program or erase the flash page i if
		759	* debug features are connected or boot code is executed in RAM, even if nWRPi = 1
		760	*
		761	* @param WriteProtectPage specifies the page(s) to be write unprotected.
		762	* The value of this parameter depend on device used within the same series
		763	* @retval HAL status
		764	*/
		765	static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage)
		766	{
		767	HAL_StatusTypeDef status = HAL_OK;
		768	uint16_t WRP0_Data = 0xFFFF;
		769	#if defined(FLASH_WRP1_WRP1)
		770	uint16_t WRP1_Data = 0xFFFF;
		771	#endif /* FLASH_WRP1_WRP1 */
		772	#if defined(FLASH_WRP2_WRP2)
		773	uint16_t WRP2_Data = 0xFFFF;
		774	#endif /* FLASH_WRP2_WRP2 */
		775	#if defined(FLASH_WRP3_WRP3)
		776	uint16_t WRP3_Data = 0xFFFF;
		777	#endif /* FLASH_WRP3_WRP3 */
		778
		779	/* Check the parameters */
		780	assert_param(IS_OB_WRP(WriteProtectPage));
		781
		782	/* Get current write protected pages and the new pages to be unprotected ******/
		783	WriteProtectPage = (FLASH_OB_GetWRP() \| WriteProtectPage);
		784
		785	#if defined(OB_WRP_PAGES0TO15MASK)
		786	WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
		787	#elif defined(OB_WRP_PAGES0TO31MASK)
		788	WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
		789	#endif /* OB_WRP_PAGES0TO31MASK */
		790
		791	#if defined(OB_WRP_PAGES16TO31MASK)
		792	WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
		793	#elif defined(OB_WRP_PAGES32TO63MASK)
		794	WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U);
		795	#endif /* OB_WRP_PAGES32TO63MASK */
		796
		797	#if defined(OB_WRP_PAGES64TO95MASK)
		798	WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16U);
		799	#endif /* OB_WRP_PAGES64TO95MASK */
		800	#if defined(OB_WRP_PAGES32TO47MASK)
		801	WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
		802	#endif /* OB_WRP_PAGES32TO47MASK */
		803
		804	#if defined(OB_WRP_PAGES96TO127MASK)
		805	WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24U);
		806	#elif defined(OB_WRP_PAGES48TO255MASK)
		807	WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U);
		808	#elif defined(OB_WRP_PAGES48TO511MASK)
		809	WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24U);
		810	#elif defined(OB_WRP_PAGES48TO127MASK)
		811	WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U);
		812	#endif /* OB_WRP_PAGES96TO127MASK */
		813
		814
		815	/* Wait for last operation to be completed */
		816	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		817
		818	if(status == HAL_OK)
		819	{
		820	/* Clean the error context */
		821	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
		822
		823	/* To be able to write again option byte, need to perform a option byte erase */
		824	status = HAL_FLASHEx_OBErase();
		825	if (status == HAL_OK)
		826	{
		827	SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
		828
		829	#if defined(FLASH_WRP0_WRP0)
		830	if(WRP0_Data != 0xFFU)
		831	{
		832	OB->WRP0 \|= WRP0_Data;
		833
		834	/* Wait for last operation to be completed */
		835	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		836	}
		837	#endif /* FLASH_WRP0_WRP0 */
		838
		839	#if defined(FLASH_WRP1_WRP1)
		840	if((status == HAL_OK) && (WRP1_Data != 0xFFU))
		841	{
		842	OB->WRP1 \|= WRP1_Data;
		843
		844	/* Wait for last operation to be completed */
		845	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		846	}
		847	#endif /* FLASH_WRP1_WRP1 */
		848
		849	#if defined(FLASH_WRP2_WRP2)
		850	if((status == HAL_OK) && (WRP2_Data != 0xFFU))
		851	{
		852	OB->WRP2 \|= WRP2_Data;
		853
		854	/* Wait for last operation to be completed */
		855	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		856	}
		857	#endif /* FLASH_WRP2_WRP2 */
		858
		859	#if defined(FLASH_WRP3_WRP3)
		860	if((status == HAL_OK) && (WRP3_Data != 0xFFU))
		861	{
		862	OB->WRP3 \|= WRP3_Data;
		863
		864	/* Wait for last operation to be completed */
		865	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		866	}
		867	#endif /* FLASH_WRP3_WRP3 */
		868
		869	/* if the program operation is completed, disable the OPTPG Bit */
		870	CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
		871	}
		872	}
		873	return status;
		874	}
		875
		876	/**
		877	* @brief Set the read protection level.
		878	* @param ReadProtectLevel specifies the read protection level.
		879	* This parameter can be one of the following values:
		880	* @arg @ref OB_RDP_LEVEL_0 No protection
		881	* @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
		882	* @retval HAL status
		883	*/
		884	static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel)
		885	{
		886	HAL_StatusTypeDef status = HAL_OK;
		887
		888	/* Check the parameters */
		889	assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel));
		890
		891	/* Wait for last operation to be completed */
		892	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		893
		894	if(status == HAL_OK)
		895	{
		896	/* Clean the error context */
		897	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
		898
		899	/* If the previous operation is completed, proceed to erase the option bytes */
		900	SET_BIT(FLASH->CR, FLASH_CR_OPTER);
		901	SET_BIT(FLASH->CR, FLASH_CR_STRT);
		902
		903	/* Wait for last operation to be completed */
		904	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		905
		906	/* If the erase operation is completed, disable the OPTER Bit */
		907	CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
		908
		909	if(status == HAL_OK)
		910	{
		911	/* Enable the Option Bytes Programming operation */
		912	SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
		913
		914	WRITE_REG(OB->RDP, ReadProtectLevel);
		915
		916	/* Wait for last operation to be completed */
		917	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		918
		919	/* if the program operation is completed, disable the OPTPG Bit */
		920	CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
		921	}
		922	}
		923
		924	return status;
		925	}
		926
		927	/**
		928	* @brief Program the FLASH User Option Byte.
		929	* @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
		930	* @param UserConfig The FLASH User Option Bytes values FLASH_OBR_IWDG_SW(Bit2),
		931	* FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4).
		932	* And BFBF2(Bit5) for STM32F101xG and STM32F103xG .
		933	* @retval HAL status
		934	*/
		935	static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig)
		936	{
		937	HAL_StatusTypeDef status = HAL_OK;
		938
		939	/* Check the parameters */
		940	assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW)));
		941	assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST)));
		942	assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST)));
		943	#if defined(FLASH_BANK2_END)
		944	assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET)));
		945	#endif /* FLASH_BANK2_END */
		946
		947	/* Wait for last operation to be completed */
		948	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		949
		950	if(status == HAL_OK)
		951	{
		952	/* Clean the error context */
		953	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
		954
		955	/* Enable the Option Bytes Programming operation */
		956	SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
		957
		958	#if defined(FLASH_BANK2_END)
		959	OB->USER = (UserConfig \| 0xF0U);
		960	#else
		961	OB->USER = (UserConfig \| 0x88U);
		962	#endif /* FLASH_BANK2_END */
		963
		964	/* Wait for last operation to be completed */
		965	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		966
		967	/* if the program operation is completed, disable the OPTPG Bit */
		968	CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
		969	}
		970
		971	return status;
		972	}
		973
		974	/**
		975	* @brief Programs a half word at a specified Option Byte Data address.
		976	* @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
		977	* The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
		978	* The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
		979	* (system reset will occur)
		980	* Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
		981	* @param Address specifies the address to be programmed.
		982	* This parameter can be 0x1FFFF804 or 0x1FFFF806.
		983	* @param Data specifies the data to be programmed.
		984	* @retval HAL status
		985	*/
		986	static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data)
		987	{
		988	HAL_StatusTypeDef status = HAL_ERROR;
		989
		990	/* Check the parameters */
		991	assert_param(IS_OB_DATA_ADDRESS(Address));
		992
		993	/* Wait for last operation to be completed */
		994	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		995
		996	if(status == HAL_OK)
		997	{
		998	/* Clean the error context */
		999	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
		1000
		1001	/* Enables the Option Bytes Programming operation */
		1002	SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
		1003	(__IO uint16_t)Address = Data;
		1004
		1005	/* Wait for last operation to be completed */
		1006	status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
		1007
		1008	/* If the program operation is completed, disable the OPTPG Bit */
		1009	CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
		1010	}
		1011	/* Return the Option Byte Data Program Status */
		1012	return status;
		1013	}
		1014
		1015	/**
		1016	* @brief Return the FLASH Write Protection Option Bytes value.
		1017	* @retval The FLASH Write Protection Option Bytes value
		1018	*/
		1019	static uint32_t FLASH_OB_GetWRP(void)
		1020	{
		1021	/* Return the FLASH write protection Register value */
		1022	return (uint32_t)(READ_REG(FLASH->WRPR));
		1023	}
		1024
		1025	/**
		1026	* @brief Returns the FLASH Read Protection level.
		1027	* @retval FLASH RDP level
		1028	* This parameter can be one of the following values:
		1029	* @arg @ref OB_RDP_LEVEL_0 No protection
		1030	* @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
		1031	*/
		1032	static uint32_t FLASH_OB_GetRDP(void)
		1033	{
		1034	uint32_t readstatus = OB_RDP_LEVEL_0;
		1035	uint32_t tmp_reg = 0U;
		1036
		1037	/* Read RDP level bits */
		1038	tmp_reg = READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT);
		1039
		1040	if (tmp_reg == FLASH_OBR_RDPRT)
		1041	{
		1042	readstatus = OB_RDP_LEVEL_1;
		1043	}
		1044	else
		1045	{
		1046	readstatus = OB_RDP_LEVEL_0;
		1047	}
		1048
		1049	return readstatus;
		1050	}
		1051
		1052	/**
		1053	* @brief Return the FLASH User Option Byte value.
		1054	* @retval The FLASH User Option Bytes values: FLASH_OBR_IWDG_SW(Bit2),
		1055	* FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4).
		1056	* And FLASH_OBR_BFB2(Bit5) for STM32F101xG and STM32F103xG .
		1057	*/
		1058	static uint8_t FLASH_OB_GetUser(void)
		1059	{
		1060	/* Return the User Option Byte */
		1061	return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT);
		1062	}
		1063
		1064	/**
		1065	* @}
		1066	*/
		1067
		1068	/**
		1069	* @}
		1070	*/
		1071
		1072	/** @addtogroup FLASH
		1073	* @{
		1074	*/
		1075
		1076	/** @addtogroup FLASH_Private_Functions
		1077	* @{
		1078	*/
		1079
		1080	/**
		1081	* @brief Erase the specified FLASH memory page
		1082	* @param PageAddress FLASH page to erase
		1083	* The value of this parameter depend on device used within the same series
		1084	*
		1085	* @retval None
		1086	*/
		1087	void FLASH_PageErase(uint32_t PageAddress)
		1088	{
		1089	/* Clean the error context */
		1090	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
		1091
		1092	#if defined(FLASH_BANK2_END)
		1093	if(PageAddress > FLASH_BANK1_END)
		1094	{
		1095	/* Proceed to erase the page */
		1096	SET_BIT(FLASH->CR2, FLASH_CR2_PER);
		1097	WRITE_REG(FLASH->AR2, PageAddress);
		1098	SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
		1099	}
		1100	else
		1101	{
		1102	#endif /* FLASH_BANK2_END */
		1103	/* Proceed to erase the page */
		1104	SET_BIT(FLASH->CR, FLASH_CR_PER);
		1105	WRITE_REG(FLASH->AR, PageAddress);
		1106	SET_BIT(FLASH->CR, FLASH_CR_STRT);
		1107	#if defined(FLASH_BANK2_END)
		1108	}
		1109	#endif /* FLASH_BANK2_END */
		1110	}
		1111
		1112	/**
		1113	* @}
		1114	*/
		1115
		1116	/**
		1117	* @}
		1118	*/
		1119
		1120	#endif /* HAL_FLASH_MODULE_ENABLED */
		1121	/**
		1122	* @}
		1123	*/
		1124

Subversion Repositories EDIS_Ignition

(root)/trunk/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c – Rev 18