Subversion Repositories LedShow

/**

  ******************************************************************************

  * @file    stm32f1xx_hal_crc.c

  * @author  MCD Application Team

  * @brief   CRC HAL module driver.

  *          This file provides firmware functions to manage the following

  *          functionalities of the Cyclic Redundancy Check (CRC) peripheral:

  *           + Initialization and de-initialization functions

  *           + Peripheral Control functions

  *           + Peripheral State functions

  *

  @verbatim

  ==============================================================================

                     ##### How to use this driver #####

  ==============================================================================

    [..]

      The CRC HAL driver can be used as follows:

      (#) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE();

      (#) Use HAL_CRC_Accumulate() function to compute the CRC value of

          a 32-bit data buffer using combination of the previous CRC value

          and the new one.

      (#) Use HAL_CRC_Calculate() function to compute the CRC Value of

          a new 32-bit data buffer. This function resets the CRC computation  

          unit before starting the computation to avoid getting wrong CRC values.

  @endverbatim

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>

  *

  * Redistribution and use in source and binary forms, with or without modification,

  * are permitted provided that the following conditions are met:

  *   1. Redistributions of source code must retain the above copyright notice,

  *      this list of conditions and the following disclaimer.

  *   2. Redistributions in binary form must reproduce the above copyright notice,

  *      this list of conditions and the following disclaimer in the documentation

  *      and/or other materials provided with the distribution.

  *   3. Neither the name of STMicroelectronics nor the names of its contributors

  *      may be used to endorse or promote products derived from this software

  *      without specific prior written permission.

  *

  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  *

  ******************************************************************************

  */

/* Includes ------------------------------------------------------------------*/

#include "stm32f1xx_hal.h"

/** @addtogroup STM32F1xx_HAL_Driver

  * @{

  */

/** @defgroup CRC CRC

  * @brief CRC HAL module driver.

  * @{

  */

#ifdef HAL_CRC_MODULE_ENABLED

/* Private typedef -----------------------------------------------------------*/

/* Private define ------------------------------------------------------------*/

/* Private macro -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

/* Private function prototypes -----------------------------------------------*/

/* Private functions ---------------------------------------------------------*/

/** @defgroup CRC_Exported_Functions CRC Exported Functions

  * @{

  */

/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions

 *  @brief    Initialization and Configuration functions.

 *

@verbatim    

  ==============================================================================

            ##### Initialization and de-initialization functions #####

  ==============================================================================

    [..]  This section provides functions allowing to:

      (+) Initialize the CRC according to the specified parameters

          in the CRC_InitTypeDef and create the associated handle

      (+) DeInitialize the CRC peripheral

      (+) Initialize the CRC MSP

      (+) DeInitialize CRC MSP

@endverbatim

  * @{

  */

/**

  * @brief  Initializes the CRC according to the specified

  *         parameters in the CRC_InitTypeDef and creates the associated handle.

  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains

  *         the configuration information for CRC

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)

{

  /* Check the CRC handle allocation */

  if(hcrc == NULL)

  {

    return HAL_ERROR;

  }

  /* Check the parameters */

  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));

  if(hcrc->State == HAL_CRC_STATE_RESET)

  {

    /* Allocate lock resource and initialize it */

    hcrc->Lock = HAL_UNLOCKED;

    /* Init the low level hardware */

    HAL_CRC_MspInit(hcrc);

  }

  /* Change CRC peripheral state */

  hcrc->State = HAL_CRC_STATE_READY;

  /* Return function status */

  return HAL_OK;

}

/**

  * @brief  DeInitializes the CRC peripheral.

  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains

  *         the configuration information for CRC

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)

{

  /* Check the CRC handle allocation */

  if(hcrc == NULL)

  {

    return HAL_ERROR;

  }

  /* Check the parameters */

  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));

  /* Change CRC peripheral state */

  hcrc->State = HAL_CRC_STATE_BUSY;

  /* DeInit the low level hardware */

  HAL_CRC_MspDeInit(hcrc);

  /* Resets the CRC calculation unit and sets the data register to 0xFFFF FFFF */

  __HAL_CRC_DR_RESET(hcrc);

  /* Reset IDR register content */

  CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR);

  /* Change CRC peripheral state */

  hcrc->State = HAL_CRC_STATE_RESET;

  /* Release Lock */

  __HAL_UNLOCK(hcrc);

  /* Return function status */

  return HAL_OK;

}

/**

  * @brief  Initializes the CRC MSP.

  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains

  *         the configuration information for CRC

  * @retval None

  */

__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)

{

  /* Prevent unused argument(s) compilation warning */

  UNUSED(hcrc);

  /* NOTE : This function Should not be modified, when the callback is needed,

            the HAL_CRC_MspInit could be implemented in the user file

   */

}

/**

  * @brief  DeInitializes the CRC MSP.

  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains

  *         the configuration information for CRC

  * @retval None

  */

__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)

{

  /* Prevent unused argument(s) compilation warning */

  UNUSED(hcrc);

  /* NOTE : This function Should not be modified, when the callback is needed,

            the HAL_CRC_MspDeInit could be implemented in the user file

   */

}

/**

  * @}

  */

/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions

 *  @brief    management functions.

 *

@verbatim  

  ==============================================================================

                      ##### Peripheral Control functions #####

  ==============================================================================  

    [..]  This section provides functions allowing to:

      (+) Compute the 32-bit CRC value of 32-bit data buffer,

          using combination of the previous CRC value and the new one.

      (+) Compute the 32-bit CRC value of 32-bit data buffer,

          independently of the previous CRC value.

@endverbatim

  * @{

  */

/**

  * @brief  Computes the 32-bit CRC of 32-bit data buffer using combination

  *         of the previous CRC value and the new one.

  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains

  *         the configuration information for CRC

  * @param  pBuffer: pointer to the buffer containing the data to be computed

  * @param  BufferLength: length of the buffer to be computed (defined in word, 4 bytes)

  * @retval 32-bit CRC

  */

uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)

{

  uint32_t index = 0U;

  /* Process Locked */

  __HAL_LOCK(hcrc);

  /* Change CRC peripheral state */

  hcrc->State = HAL_CRC_STATE_BUSY;

  /* Enter Data to the CRC calculator */

  for(index = 0U; index < BufferLength; index++)

  {

    hcrc->Instance->DR = pBuffer[index];

  }

  /* Change CRC peripheral state */

  hcrc->State = HAL_CRC_STATE_READY;

  /* Process Unlocked */

  __HAL_UNLOCK(hcrc);

  /* Return the CRC computed value */

  return hcrc->Instance->DR;

}

/**

  * @brief  Computes the 32-bit CRC of 32-bit data buffer independently

  *         of the previous CRC value.

  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains

  *         the configuration information for CRC

  * @param  pBuffer: Pointer to the buffer containing the data to be computed

  * @param  BufferLength: Length of the buffer to be computed (defined in word, 4 bytes)

  * @retval 32-bit CRC

  */

uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)

{

  uint32_t index = 0U;

  /* Process Locked */

  __HAL_LOCK(hcrc);

  /* Change CRC peripheral state */

  hcrc->State = HAL_CRC_STATE_BUSY;

  /* Reset CRC Calculation Unit */

  __HAL_CRC_DR_RESET(hcrc);

  /* Enter Data to the CRC calculator */

  for(index = 0U; index < BufferLength; index++)

  {

    hcrc->Instance->DR = pBuffer[index];

  }

  /* Change CRC peripheral state */

  hcrc->State = HAL_CRC_STATE_READY;

  /* Process Unlocked */

  __HAL_UNLOCK(hcrc);

  /* Return the CRC computed value */

  return hcrc->Instance->DR;

}

/**

  * @}

  */

/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions

 *  @brief    Peripheral State functions.

 *

@verbatim  

  ==============================================================================

                      ##### Peripheral State functions #####

  ==============================================================================  

    [..]

    This subsection permits to get in run-time the status of the peripheral.

@endverbatim

  * @{

  */

/**

  * @brief  Returns the CRC state.

  * @param  hcrc: pointer to a CRC_HandleTypeDef structure that contains

  *         the configuration information for CRC

  * @retval HAL state

  */

HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)

{

  return hcrc->State;

}

/**

  * @}

  */

/**

  * @}

  */

#endif /* HAL_CRC_MODULE_ENABLED */

/**

  * @}

  */

/**

  * @}

  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/