Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 2 | mjames | 1 | /** |
| 2 | ****************************************************************************** |
||
| 3 | * @file stm32f1xx_ll_usb.h |
||
| 4 | * @author MCD Application Team |
||
| 5 | * @brief Header file of USB Low Layer HAL module. |
||
| 6 | ****************************************************************************** |
||
| 7 | * @attention |
||
| 8 | * |
||
| 9 | * Copyright (c) 2016 STMicroelectronics. |
||
| 10 | * All rights reserved. |
||
| 11 | * |
||
| 12 | * This software is licensed under terms that can be found in the LICENSE file |
||
| 13 | * in the root directory of this software component. |
||
| 14 | * If no LICENSE file comes with this software, it is provided AS-IS. |
||
| 15 | * |
||
| 16 | ****************************************************************************** |
||
| 17 | */ |
||
| 18 | |||
| 19 | /* Define to prevent recursive inclusion -------------------------------------*/ |
||
| 20 | #ifndef STM32F1xx_LL_USB_H |
||
| 21 | #define STM32F1xx_LL_USB_H |
||
| 22 | |||
| 23 | #ifdef __cplusplus |
||
| 24 | extern "C" { |
||
| 25 | #endif /* __cplusplus */ |
||
| 26 | |||
| 27 | /* Includes ------------------------------------------------------------------*/ |
||
| 28 | #include "stm32f1xx_hal_def.h" |
||
| 29 | |||
| 30 | #if defined (USB) || defined (USB_OTG_FS) |
||
| 31 | /** @addtogroup STM32F1xx_HAL_Driver |
||
| 32 | * @{ |
||
| 33 | */ |
||
| 34 | |||
| 35 | /** @addtogroup USB_LL |
||
| 36 | * @{ |
||
| 37 | */ |
||
| 38 | |||
| 39 | /* Exported types ------------------------------------------------------------*/ |
||
| 40 | |||
| 41 | /** |
||
| 42 | * @brief USB Mode definition |
||
| 43 | */ |
||
| 44 | |||
| 45 | typedef enum |
||
| 46 | { |
||
| 47 | USB_DEVICE_MODE = 0, |
||
| 48 | USB_HOST_MODE = 1, |
||
| 49 | USB_DRD_MODE = 2 |
||
| 50 | } USB_ModeTypeDef; |
||
| 51 | |||
| 52 | /** |
||
| 53 | * @brief URB States definition |
||
| 54 | */ |
||
| 55 | typedef enum |
||
| 56 | { |
||
| 57 | URB_IDLE = 0, |
||
| 58 | URB_DONE, |
||
| 59 | URB_NOTREADY, |
||
| 60 | URB_NYET, |
||
| 61 | URB_ERROR, |
||
| 62 | URB_STALL |
||
| 63 | } USB_URBStateTypeDef; |
||
| 64 | |||
| 65 | /** |
||
| 66 | * @brief Host channel States definition |
||
| 67 | */ |
||
| 68 | typedef enum |
||
| 69 | { |
||
| 70 | HC_IDLE = 0, |
||
| 71 | HC_XFRC, |
||
| 72 | HC_HALTED, |
||
| 73 | HC_ACK, |
||
| 74 | HC_NAK, |
||
| 75 | HC_NYET, |
||
| 76 | HC_STALL, |
||
| 77 | HC_XACTERR, |
||
| 78 | HC_BBLERR, |
||
| 79 | HC_DATATGLERR |
||
| 80 | } USB_HCStateTypeDef; |
||
| 81 | |||
| 82 | |||
| 83 | /** |
||
| 84 | * @brief USB Instance Initialization Structure definition |
||
| 85 | */ |
||
| 86 | typedef struct |
||
| 87 | { |
||
| 88 | uint32_t dev_endpoints; /*!< Device Endpoints number. |
||
| 89 | This parameter depends on the used USB core. |
||
| 90 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
||
| 91 | |||
| 92 | #if defined (USB_OTG_FS) |
||
| 93 | uint32_t Host_channels; /*!< Host Channels number. |
||
| 94 | This parameter Depends on the used USB core. |
||
| 95 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
||
| 96 | |||
| 97 | uint32_t dma_enable; /*!< USB DMA state. |
||
| 98 | If DMA is not supported this parameter shall be set by default to zero */ |
||
| 99 | #endif /* defined (USB_OTG_FS) */ |
||
| 100 | |||
| 101 | uint32_t speed; /*!< USB Core speed. |
||
| 102 | This parameter can be any value of @ref PCD_Speed/HCD_Speed |
||
| 103 | (HCD_SPEED_xxx, HCD_SPEED_xxx) */ |
||
| 104 | |||
| 105 | uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ |
||
| 106 | |||
| 107 | uint32_t phy_itface; /*!< Select the used PHY interface. |
||
| 108 | This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ |
||
| 109 | |||
| 110 | uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ |
||
| 111 | |||
| 112 | uint32_t low_power_enable; /*!< Enable or disable the low Power Mode. */ |
||
| 113 | |||
| 114 | uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ |
||
| 115 | |||
| 116 | uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ |
||
| 117 | |||
| 118 | #if defined (USB_OTG_FS) |
||
| 119 | uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ |
||
| 120 | |||
| 121 | uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ |
||
| 122 | |||
| 123 | uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ |
||
| 124 | #endif /* defined (USB_OTG_FS) */ |
||
| 125 | } USB_CfgTypeDef; |
||
| 126 | |||
| 127 | typedef struct |
||
| 128 | { |
||
| 129 | uint8_t num; /*!< Endpoint number |
||
| 130 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
||
| 131 | |||
| 132 | uint8_t is_in; /*!< Endpoint direction |
||
| 133 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 134 | |||
| 135 | uint8_t is_stall; /*!< Endpoint stall condition |
||
| 136 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 137 | |||
| 138 | #if defined (USB_OTG_FS) |
||
| 139 | uint8_t is_iso_incomplete; /*!< Endpoint isoc condition |
||
| 140 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 141 | #endif /* defined (USB_OTG_FS) */ |
||
| 142 | |||
| 143 | uint8_t type; /*!< Endpoint type |
||
| 144 | This parameter can be any value of @ref USB_LL_EP_Type */ |
||
| 145 | |||
| 146 | uint8_t data_pid_start; /*!< Initial data PID |
||
| 147 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 148 | |||
| 149 | #if defined (USB) |
||
| 150 | uint16_t pmaadress; /*!< PMA Address |
||
| 151 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
||
| 152 | |||
| 153 | uint16_t pmaaddr0; /*!< PMA Address0 |
||
| 154 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
||
| 155 | |||
| 156 | uint16_t pmaaddr1; /*!< PMA Address1 |
||
| 157 | This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
||
| 158 | |||
| 159 | uint8_t doublebuffer; /*!< Double buffer enable |
||
| 160 | This parameter can be 0 or 1 */ |
||
| 161 | #endif /* defined (USB) */ |
||
| 162 | |||
| 163 | uint32_t maxpacket; /*!< Endpoint Max packet size |
||
| 164 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
||
| 165 | |||
| 166 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ |
||
| 167 | |||
| 168 | uint32_t xfer_len; /*!< Current transfer length */ |
||
| 169 | |||
| 170 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ |
||
| 171 | |||
| 172 | #if defined (USB_OTG_FS) |
||
| 173 | uint8_t even_odd_frame; /*!< IFrame parity |
||
| 174 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 175 | |||
| 176 | uint16_t tx_fifo_num; /*!< Transmission FIFO number |
||
| 177 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
||
| 178 | |||
| 179 | uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ |
||
| 180 | |||
| 181 | uint32_t xfer_size; /*!< requested transfer size */ |
||
| 182 | #endif /* defined (USB_OTG_FS) */ |
||
| 183 | |||
| 184 | #if defined (USB) |
||
| 185 | uint32_t xfer_len_db; /*!< double buffer transfer length used with bulk double buffer in */ |
||
| 186 | |||
| 187 | uint8_t xfer_fill_db; /*!< double buffer Need to Fill new buffer used with bulk_in */ |
||
| 188 | #endif /* defined (USB) */ |
||
| 189 | } USB_EPTypeDef; |
||
| 190 | |||
| 191 | typedef struct |
||
| 192 | { |
||
| 193 | uint8_t dev_addr; /*!< USB device address. |
||
| 194 | This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ |
||
| 195 | |||
| 196 | uint8_t ch_num; /*!< Host channel number. |
||
| 197 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
||
| 198 | |||
| 199 | uint8_t ep_num; /*!< Endpoint number. |
||
| 200 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
||
| 201 | |||
| 202 | uint8_t ep_is_in; /*!< Endpoint direction |
||
| 203 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 204 | |||
| 205 | uint8_t speed; /*!< USB Host Channel speed. |
||
| 206 | This parameter can be any value of @ref HCD_Device_Speed: |
||
| 207 | (HCD_DEVICE_SPEED_xxx) */ |
||
| 208 | |||
| 209 | uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ |
||
| 210 | |||
| 211 | uint8_t hub_port_nbr; /*!< USB HUB port number */ |
||
| 212 | uint8_t hub_addr; /*!< USB HUB address */ |
||
| 213 | |||
| 214 | uint8_t ep_type; /*!< Endpoint Type. |
||
| 215 | This parameter can be any value of @ref USB_LL_EP_Type */ |
||
| 216 | |||
| 217 | uint16_t max_packet; /*!< Endpoint Max packet size. |
||
| 218 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
||
| 219 | |||
| 220 | uint8_t data_pid; /*!< Initial data PID. |
||
| 221 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 222 | |||
| 223 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ |
||
| 224 | |||
| 225 | uint32_t XferSize; /*!< OTG Channel transfer size. */ |
||
| 226 | |||
| 227 | uint32_t xfer_len; /*!< Current transfer length. */ |
||
| 228 | |||
| 229 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ |
||
| 230 | |||
| 231 | uint8_t toggle_in; /*!< IN transfer current toggle flag. |
||
| 232 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 233 | |||
| 234 | uint8_t toggle_out; /*!< OUT transfer current toggle flag |
||
| 235 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
||
| 236 | |||
| 237 | uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ |
||
| 238 | |||
| 239 | uint32_t ErrCnt; /*!< Host channel error count. */ |
||
| 240 | |||
| 241 | USB_URBStateTypeDef urb_state; /*!< URB state. |
||
| 242 | This parameter can be any value of @ref USB_URBStateTypeDef */ |
||
| 243 | |||
| 244 | USB_HCStateTypeDef state; /*!< Host Channel state. |
||
| 245 | This parameter can be any value of @ref USB_HCStateTypeDef */ |
||
| 246 | } USB_HCTypeDef; |
||
| 247 | |||
| 248 | #if defined (USB_OTG_FS) |
||
| 249 | typedef USB_ModeTypeDef USB_OTG_ModeTypeDef; |
||
| 250 | typedef USB_CfgTypeDef USB_OTG_CfgTypeDef; |
||
| 251 | typedef USB_EPTypeDef USB_OTG_EPTypeDef; |
||
| 252 | typedef USB_URBStateTypeDef USB_OTG_URBStateTypeDef; |
||
| 253 | typedef USB_HCStateTypeDef USB_OTG_HCStateTypeDef; |
||
| 254 | typedef USB_HCTypeDef USB_OTG_HCTypeDef; |
||
| 255 | #endif /* defined (USB_OTG_FS) */ |
||
| 256 | |||
| 257 | /* Exported constants --------------------------------------------------------*/ |
||
| 258 | |||
| 259 | /** @defgroup PCD_Exported_Constants PCD Exported Constants |
||
| 260 | * @{ |
||
| 261 | */ |
||
| 262 | |||
| 263 | #if defined (USB_OTG_FS) |
||
| 264 | /** @defgroup USB_OTG_CORE VERSION ID |
||
| 265 | * @{ |
||
| 266 | */ |
||
| 267 | #define USB_OTG_CORE_ID_300A 0x4F54300AU |
||
| 268 | #define USB_OTG_CORE_ID_310A 0x4F54310AU |
||
| 269 | /** |
||
| 270 | * @} |
||
| 271 | */ |
||
| 272 | |||
| 273 | /** @defgroup USB_Core_Mode_ USB Core Mode |
||
| 274 | * @{ |
||
| 275 | */ |
||
| 276 | #define USB_OTG_MODE_DEVICE 0U |
||
| 277 | #define USB_OTG_MODE_HOST 1U |
||
| 278 | #define USB_OTG_MODE_DRD 2U |
||
| 279 | /** |
||
| 280 | * @} |
||
| 281 | */ |
||
| 282 | |||
| 283 | /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed |
||
| 284 | * @{ |
||
| 285 | */ |
||
| 286 | #define USB_OTG_SPEED_FULL 3U |
||
| 287 | /** |
||
| 288 | * @} |
||
| 289 | */ |
||
| 290 | |||
| 291 | /** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY |
||
| 292 | * @{ |
||
| 293 | */ |
||
| 294 | #define USB_OTG_EMBEDDED_PHY 2U |
||
| 295 | /** |
||
| 296 | * @} |
||
| 297 | */ |
||
| 298 | |||
| 299 | /** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value |
||
| 300 | * @{ |
||
| 301 | */ |
||
| 302 | #ifndef USBD_FS_TRDT_VALUE |
||
| 303 | #define USBD_FS_TRDT_VALUE 5U |
||
| 304 | #define USBD_DEFAULT_TRDT_VALUE 9U |
||
| 305 | #endif /* USBD_HS_TRDT_VALUE */ |
||
| 306 | /** |
||
| 307 | * @} |
||
| 308 | */ |
||
| 309 | |||
| 310 | /** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS |
||
| 311 | * @{ |
||
| 312 | */ |
||
| 313 | #define USB_OTG_FS_MAX_PACKET_SIZE 64U |
||
| 314 | #define USB_OTG_MAX_EP0_SIZE 64U |
||
| 315 | /** |
||
| 316 | * @} |
||
| 317 | */ |
||
| 318 | |||
| 319 | /** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency |
||
| 320 | * @{ |
||
| 321 | */ |
||
| 322 | #define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) |
||
| 323 | #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) |
||
| 324 | #define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) |
||
| 325 | /** |
||
| 326 | * @} |
||
| 327 | */ |
||
| 328 | |||
| 329 | /** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval |
||
| 330 | * @{ |
||
| 331 | */ |
||
| 332 | #define DCFG_FRAME_INTERVAL_80 0U |
||
| 333 | #define DCFG_FRAME_INTERVAL_85 1U |
||
| 334 | #define DCFG_FRAME_INTERVAL_90 2U |
||
| 335 | #define DCFG_FRAME_INTERVAL_95 3U |
||
| 336 | /** |
||
| 337 | * @} |
||
| 338 | */ |
||
| 339 | #endif /* defined (USB_OTG_FS) */ |
||
| 340 | /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS |
||
| 341 | * @{ |
||
| 342 | */ |
||
| 343 | #define EP_MPS_64 0U |
||
| 344 | #define EP_MPS_32 1U |
||
| 345 | #define EP_MPS_16 2U |
||
| 346 | #define EP_MPS_8 3U |
||
| 347 | /** |
||
| 348 | * @} |
||
| 349 | */ |
||
| 350 | |||
| 351 | /** @defgroup USB_LL_EP_Type USB Low Layer EP Type |
||
| 352 | * @{ |
||
| 353 | */ |
||
| 354 | #define EP_TYPE_CTRL 0U |
||
| 355 | #define EP_TYPE_ISOC 1U |
||
| 356 | #define EP_TYPE_BULK 2U |
||
| 357 | #define EP_TYPE_INTR 3U |
||
| 358 | #define EP_TYPE_MSK 3U |
||
| 359 | /** |
||
| 360 | * @} |
||
| 361 | */ |
||
| 362 | |||
| 363 | /** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed |
||
| 364 | * @{ |
||
| 365 | */ |
||
| 366 | #define EP_SPEED_LOW 0U |
||
| 367 | #define EP_SPEED_FULL 1U |
||
| 368 | #define EP_SPEED_HIGH 2U |
||
| 369 | /** |
||
| 370 | * @} |
||
| 371 | */ |
||
| 372 | |||
| 373 | /** @defgroup USB_LL_CH_PID_Type USB Low Layer Channel PID Type |
||
| 374 | * @{ |
||
| 375 | */ |
||
| 376 | #define HC_PID_DATA0 0U |
||
| 377 | #define HC_PID_DATA2 1U |
||
| 378 | #define HC_PID_DATA1 2U |
||
| 379 | #define HC_PID_SETUP 3U |
||
| 380 | /** |
||
| 381 | * @} |
||
| 382 | */ |
||
| 383 | |||
| 384 | /** @defgroup USB_LL Device Speed |
||
| 385 | * @{ |
||
| 386 | */ |
||
| 387 | #define USBD_FS_SPEED 2U |
||
| 388 | #define USBH_FSLS_SPEED 1U |
||
| 389 | /** |
||
| 390 | * @} |
||
| 391 | */ |
||
| 392 | |||
| 393 | #if defined (USB_OTG_FS) |
||
| 394 | /** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines |
||
| 395 | * @{ |
||
| 396 | */ |
||
| 397 | #define STS_GOUT_NAK 1U |
||
| 398 | #define STS_DATA_UPDT 2U |
||
| 399 | #define STS_XFER_COMP 3U |
||
| 400 | #define STS_SETUP_COMP 4U |
||
| 401 | #define STS_SETUP_UPDT 6U |
||
| 402 | /** |
||
| 403 | * @} |
||
| 404 | */ |
||
| 405 | |||
| 406 | /** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines |
||
| 407 | * @{ |
||
| 408 | */ |
||
| 409 | #define HCFG_30_60_MHZ 0U |
||
| 410 | #define HCFG_48_MHZ 1U |
||
| 411 | #define HCFG_6_MHZ 2U |
||
| 412 | /** |
||
| 413 | * @} |
||
| 414 | */ |
||
| 415 | |||
| 416 | /** @defgroup USB_LL_HFIR_Defines USB Low Layer frame interval Defines |
||
| 417 | * @{ |
||
| 418 | */ |
||
| 419 | #define HFIR_6_MHZ 6000U |
||
| 420 | #define HFIR_60_MHZ 60000U |
||
| 421 | #define HFIR_48_MHZ 48000U |
||
| 422 | /** |
||
| 423 | * @} |
||
| 424 | */ |
||
| 425 | |||
| 426 | /** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines |
||
| 427 | * @{ |
||
| 428 | */ |
||
| 429 | #define HPRT0_PRTSPD_HIGH_SPEED 0U |
||
| 430 | #define HPRT0_PRTSPD_FULL_SPEED 1U |
||
| 431 | #define HPRT0_PRTSPD_LOW_SPEED 2U |
||
| 432 | /** |
||
| 433 | * @} |
||
| 434 | */ |
||
| 435 | |||
| 436 | #define HCCHAR_CTRL 0U |
||
| 437 | #define HCCHAR_ISOC 1U |
||
| 438 | #define HCCHAR_BULK 2U |
||
| 439 | #define HCCHAR_INTR 3U |
||
| 440 | |||
| 441 | #define GRXSTS_PKTSTS_IN 2U |
||
| 442 | #define GRXSTS_PKTSTS_IN_XFER_COMP 3U |
||
| 443 | #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U |
||
| 444 | #define GRXSTS_PKTSTS_CH_HALTED 7U |
||
| 445 | |||
| 446 | #define CLEAR_INTERRUPT_MASK 0xFFFFFFFFU |
||
| 447 | |||
| 448 | #define HC_MAX_PKT_CNT 256U |
||
| 449 | |||
| 450 | #define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) |
||
| 451 | #define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) |
||
| 452 | |||
| 453 | #define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) |
||
| 454 | #define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ |
||
| 455 | + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) |
||
| 456 | |||
| 457 | #define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ |
||
| 458 | + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) |
||
| 459 | |||
| 460 | #define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) |
||
| 461 | |||
| 462 | #define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) |
||
| 463 | #define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ |
||
| 464 | + USB_OTG_HOST_CHANNEL_BASE\ |
||
| 465 | + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) |
||
| 466 | |||
| 467 | |||
| 468 | #define EP_ADDR_MSK 0xFU |
||
| 469 | #endif /* defined (USB_OTG_FS) */ |
||
| 470 | |||
| 471 | #if defined (USB) |
||
| 472 | #define BTABLE_ADDRESS 0x000U |
||
| 473 | #define PMA_ACCESS 2U |
||
| 474 | |||
| 475 | #ifndef USB_EP_RX_STRX |
||
| 476 | #define USB_EP_RX_STRX (0x3U << 12) |
||
| 477 | #endif /* USB_EP_RX_STRX */ |
||
| 478 | |||
| 479 | #define EP_ADDR_MSK 0x7U |
||
| 480 | |||
| 481 | #ifndef USE_USB_DOUBLE_BUFFER |
||
| 482 | #define USE_USB_DOUBLE_BUFFER 1U |
||
| 483 | #endif /* USE_USB_DOUBLE_BUFFER */ |
||
| 484 | #endif /* defined (USB) */ |
||
| 485 | |||
| 486 | /** |
||
| 487 | * @} |
||
| 488 | */ |
||
| 489 | |||
| 490 | /* Exported macro ------------------------------------------------------------*/ |
||
| 491 | /** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros |
||
| 492 | * @{ |
||
| 493 | */ |
||
| 494 | #if defined (USB_OTG_FS) |
||
| 495 | #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) |
||
| 496 | #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) |
||
| 497 | |||
| 498 | #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) |
||
| 499 | #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) |
||
| 500 | #endif /* defined (USB_OTG_FS) */ |
||
| 501 | /** |
||
| 502 | * @} |
||
| 503 | */ |
||
| 504 | |||
| 505 | /* Exported functions --------------------------------------------------------*/ |
||
| 506 | /** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions |
||
| 507 | * @{ |
||
| 508 | */ |
||
| 509 | #if defined (USB_OTG_FS) |
||
| 510 | HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
||
| 511 | HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
||
| 512 | HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); |
||
| 513 | HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); |
||
| 514 | HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); |
||
| 515 | HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode); |
||
| 516 | HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed); |
||
| 517 | HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); |
||
| 518 | HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); |
||
| 519 | HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
||
| 520 | HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
||
| 521 | HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
||
| 522 | HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
||
| 523 | HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
||
| 524 | HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, |
||
| 525 | uint8_t ch_ep_num, uint16_t len); |
||
| 526 | |||
| 527 | void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); |
||
| 528 | HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
||
| 529 | HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
||
| 530 | HAL_StatusTypeDef USB_EPStopXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
||
| 531 | HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address); |
||
| 532 | HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx); |
||
| 533 | HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx); |
||
| 534 | HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); |
||
| 535 | HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx); |
||
| 536 | HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); |
||
| 537 | uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); |
||
| 538 | uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); |
||
| 539 | uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx); |
||
| 540 | uint32_t USB_ReadChInterrupts(USB_OTG_GlobalTypeDef *USBx, uint8_t chnum); |
||
| 541 | uint32_t USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx); |
||
| 542 | uint32_t USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); |
||
| 543 | uint32_t USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx); |
||
| 544 | uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); |
||
| 545 | void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); |
||
| 546 | |||
| 547 | HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
||
| 548 | HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq); |
||
| 549 | HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); |
||
| 550 | HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state); |
||
| 551 | uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx); |
||
| 552 | uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx); |
||
| 553 | HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, |
||
| 554 | uint8_t epnum, uint8_t dev_address, uint8_t speed, |
||
| 555 | uint8_t ep_type, uint16_t mps); |
||
| 556 | HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, |
||
| 557 | USB_OTG_HCTypeDef *hc); |
||
| 558 | |||
| 559 | uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx); |
||
| 560 | HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); |
||
| 561 | HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); |
||
| 562 | HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); |
||
| 563 | HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); |
||
| 564 | HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); |
||
| 565 | #endif /* defined (USB_OTG_FS) */ |
||
| 566 | |||
| 567 | #if defined (USB) |
||
| 568 | HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); |
||
| 569 | HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg); |
||
| 570 | HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); |
||
| 571 | HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); |
||
| 572 | HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode); |
||
| 573 | HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed); |
||
| 574 | |||
| 575 | HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef const *USBx); |
||
| 576 | HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef const *USBx, uint32_t num); |
||
| 577 | |||
| 578 | #if defined (HAL_PCD_MODULE_ENABLED) |
||
| 579 | HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
||
| 580 | HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
||
| 581 | HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
||
| 582 | HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
||
| 583 | HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
||
| 584 | HAL_StatusTypeDef USB_EPStopXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
||
| 585 | #endif /* defined (HAL_PCD_MODULE_ENABLED) */ |
||
| 586 | |||
| 587 | HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address); |
||
| 588 | HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx); |
||
| 589 | HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx); |
||
| 590 | HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); |
||
| 591 | HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); |
||
| 592 | HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, |
||
| 593 | uint8_t ch_ep_num, uint16_t len); |
||
| 594 | |||
| 595 | void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); |
||
| 596 | |||
| 597 | uint32_t USB_ReadInterrupts(USB_TypeDef const *USBx); |
||
| 598 | uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx); |
||
| 599 | uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); |
||
| 600 | uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx); |
||
| 601 | uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum); |
||
| 602 | void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt); |
||
| 603 | HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); |
||
| 604 | HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); |
||
| 605 | |||
| 606 | void USB_WritePMA(USB_TypeDef const *USBx, uint8_t *pbUsrBuf, |
||
| 607 | uint16_t wPMABufAddr, uint16_t wNBytes); |
||
| 608 | |||
| 609 | void USB_ReadPMA(USB_TypeDef const *USBx, uint8_t *pbUsrBuf, |
||
| 610 | uint16_t wPMABufAddr, uint16_t wNBytes); |
||
| 611 | #endif /* defined (USB) */ |
||
| 612 | /** |
||
| 613 | * @} |
||
| 614 | */ |
||
| 615 | |||
| 616 | /** |
||
| 617 | * @} |
||
| 618 | */ |
||
| 619 | |||
| 620 | /** |
||
| 621 | * @} |
||
| 622 | */ |
||
| 623 | |||
| 624 | /** |
||
| 625 | * @} |
||
| 626 | */ |
||
| 627 | #endif /* defined (USB) || defined (USB_OTG_FS) */ |
||
| 628 | |||
| 629 | #ifdef __cplusplus |
||
| 630 | } |
||
| 631 | #endif /* __cplusplus */ |
||
| 632 | |||
| 633 | |||
| 634 | #endif /* STM32F1xx_LL_USB_H */ |