Subversion Repositories DashDisplay

/**

  ******************************************************************************

  * @file    stm32f1xx_hal_smartcard.h

  * @author  MCD Application Team

  * @version V1.0.4

  * @date    29-April-2016

  * @brief   Header file of SMARTCARD HAL module.

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>

  *

  * Redistribution and use in source and binary forms, with or without modification,

  * are permitted provided that the following conditions are met:

  *   1. Redistributions of source code must retain the above copyright notice,

  *      this list of conditions and the following disclaimer.

  *   2. Redistributions in binary form must reproduce the above copyright notice,

  *      this list of conditions and the following disclaimer in the documentation

  *      and/or other materials provided with the distribution.

  *   3. Neither the name of STMicroelectronics nor the names of its contributors

  *      may be used to endorse or promote products derived from this software

  *      without specific prior written permission.

  *

  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE

  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  *

  ******************************************************************************

  */

/* Define to prevent recursive inclusion -------------------------------------*/

#ifndef __STM32F1xx_HAL_SMARTCARD_H

#define __STM32F1xx_HAL_SMARTCARD_H

#ifdef __cplusplus

 extern "C" {

#endif

/* Includes ------------------------------------------------------------------*/

#include "stm32f1xx_hal_def.h"

/** @addtogroup STM32F1xx_HAL_Driver

  * @{

  */

/** @addtogroup SMARTCARD

  * @{

  */

/* Exported types ------------------------------------------------------------*/

/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types

  * @{

  */

/**

  * @brief SMARTCARD Init Structure definition

  */

typedef struct

{

  uint32_t BaudRate;                  /*!< This member configures the SmartCard communication baud rate.

                                           The baud rate is computed using the following formula:

                                           - IntegerDivider = ((PCLKx) / (16 * (hsmartcard->Init.BaudRate)))

                                           - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */

  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.

                                           This parameter can be a value of @ref SMARTCARD_Word_Length */

  uint32_t StopBits;                  /*!< Specifies the number of stop bits transmitted.

                                           This parameter can be a value of @ref SMARTCARD_Stop_Bits */

  uint32_t Parity;                    /*!< Specifies the parity mode.

                                           This parameter can be a value of @ref SMARTCARD_Parity

                                           @note When parity is enabled, the computed parity is inserted

                                                 at the MSB position of the transmitted data (9th bit when

                                                 the word length is set to 9 data bits; 8th bit when the

                                                 word length is set to 8 data bits).*/

  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.

                                           This parameter can be a value of @ref SMARTCARD_Mode */

  uint32_t CLKPolarity;               /*!< Specifies the steady state of the serial clock.

                                           This parameter can be a value of @ref SMARTCARD_Clock_Polarity */

  uint32_t CLKPhase;                  /*!< Specifies the clock transition on which the bit capture is made.

                                           This parameter can be a value of @ref SMARTCARD_Clock_Phase */

  uint32_t CLKLastBit;                /*!< Specifies whether the clock pulse corresponding to the last transmitted

                                           data bit (MSB) has to be output on the SCLK pin in synchronous mode.

                                           This parameter can be a value of @ref SMARTCARD_Last_Bit */

  uint32_t Prescaler;                 /*!< Specifies the SmartCard Prescaler value used for dividing the system clock

                                           to provide the smartcard clock. The value given in the register (5 significant bits)

                                           is multiplied by 2 to give the division factor of the source clock frequency.

                                           This parameter can be a value of @ref SMARTCARD_Prescaler */

  uint32_t GuardTime;                 /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks */

  uint32_t NACKState;                 /*!< Specifies the SmartCard NACK Transmission state

                                           This parameter can be a value of @ref SMARTCARD_NACK_State */

}SMARTCARD_InitTypeDef;

/**

  * @brief HAL State structures definition

  */

typedef enum

{

  HAL_SMARTCARD_STATE_RESET             = 0x00,    /*!< Peripheral is not yet Initialized */

  HAL_SMARTCARD_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use */

  HAL_SMARTCARD_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing */

  HAL_SMARTCARD_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing */

  HAL_SMARTCARD_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing */

  HAL_SMARTCARD_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */

  HAL_SMARTCARD_STATE_TIMEOUT           = 0x03,    /*!< Timeout state */

  HAL_SMARTCARD_STATE_ERROR             = 0x04     /*!< Error */

}HAL_SMARTCARD_StateTypeDef;

/**

  * @brief  SMARTCARD handle Structure definition

  */

typedef struct

{

  USART_TypeDef                    *Instance;        /*!< USART registers base address */

  SMARTCARD_InitTypeDef            Init;             /*!< SmartCard communication parameters */

  uint8_t                          *pTxBuffPtr;      /*!< Pointer to SmartCard Tx transfer Buffer */

  uint16_t                         TxXferSize;       /*!< SmartCard Tx Transfer size */

  uint16_t                         TxXferCount;      /*!< SmartCard Tx Transfer Counter */

  uint8_t                          *pRxBuffPtr;      /*!< Pointer to SmartCard Rx transfer Buffer */

  uint16_t                         RxXferSize;       /*!< SmartCard Rx Transfer size */

  uint16_t                         RxXferCount;      /*!< SmartCard Rx Transfer Counter */

  DMA_HandleTypeDef                *hdmatx;          /*!< SmartCard Tx DMA Handle parameters */

  DMA_HandleTypeDef                *hdmarx;          /*!< SmartCard Rx DMA Handle parameters */

  HAL_LockTypeDef                  Lock;             /*!< Locking object */

  __IO HAL_SMARTCARD_StateTypeDef  State;            /*!< SmartCard communication state */

  __IO uint32_t  ErrorCode;        /*!< SmartCard Error code */

}SMARTCARD_HandleTypeDef;

/**

  * @}

  */

/* Exported constants --------------------------------------------------------*/

/** @defgroup SMARTCARD_Exported_Constants  SMARTCARD Exported constants

  * @{

  */

/** @defgroup SMARTCARD_Error_Codes SMARTCARD Error Codes

  * @{

  */

#define HAL_SMARTCARD_ERROR_NONE      ((uint32_t)0x00)    /*!< No error            */

#define HAL_SMARTCARD_ERROR_PE        ((uint32_t)0x01)    /*!< Parity error        */

#define HAL_SMARTCARD_ERROR_NE        ((uint32_t)0x02)    /*!< Noise error         */

#define HAL_SMARTCARD_ERROR_FE        ((uint32_t)0x04)    /*!< frame error         */

#define HAL_SMARTCARD_ERROR_ORE       ((uint32_t)0x08)    /*!< Overrun error       */

#define HAL_SMARTCARD_ERROR_DMA       ((uint32_t)0x10)     /*!< DMA transfer error  */

/**

  * @}

  */

/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length

  * @{

  */

#define SMARTCARD_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M)

/**

  * @}

  */

/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits

  * @{

  */

#define SMARTCARD_STOPBITS_0_5                   ((uint32_t)USART_CR2_STOP_0)

#define SMARTCARD_STOPBITS_1_5                   ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))

/**

  * @}

  */

/** @defgroup SMARTCARD_Parity SMARTCARD Parity

  * @{

  */

#define SMARTCARD_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)

#define SMARTCARD_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) 

/**

  * @}

  */

/** @defgroup SMARTCARD_Mode SMARTCARD Mode

  * @{

  */

#define SMARTCARD_MODE_RX                        ((uint32_t)USART_CR1_RE)

#define SMARTCARD_MODE_TX                        ((uint32_t)USART_CR1_TE)

#define SMARTCARD_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE |USART_CR1_RE))

/**

  * @}

  */

/** @defgroup SMARTCARD_Clock_Polarity  SMARTCARD Clock Polarity

  * @{

  */

#define SMARTCARD_POLARITY_LOW                   ((uint32_t)0x00000000)

#define SMARTCARD_POLARITY_HIGH                  ((uint32_t)USART_CR2_CPOL)

/**

  * @}

  */

/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase

  * @{

  */

#define SMARTCARD_PHASE_1EDGE                    ((uint32_t)0x00000000)

#define SMARTCARD_PHASE_2EDGE                    ((uint32_t)USART_CR2_CPHA)

/**

  * @}

  */

/** @defgroup SMARTCARD_Last_Bit  SMARTCARD Last Bit

  * @{

  */

#define SMARTCARD_LASTBIT_DISABLE                ((uint32_t)0x00000000)

#define SMARTCARD_LASTBIT_ENABLE                 ((uint32_t)USART_CR2_LBCL)

/**

  * @}

  */

/** @defgroup SMARTCARD_NACK_State   SMARTCARD NACK State

  * @{

  */

#define SMARTCARD_NACK_ENABLE                    ((uint32_t)USART_CR3_NACK)

#define SMARTCARD_NACK_DISABLE                   ((uint32_t)0x00000000)

/**

  * @}

  */

/** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests

  * @{

  */

#define SMARTCARD_DMAREQ_TX                      ((uint32_t)USART_CR3_DMAT)

#define SMARTCARD_DMAREQ_RX                      ((uint32_t)USART_CR3_DMAR)

/**

  * @}

  */

/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler

  * @{

  */

#define SMARTCARD_PRESCALER_SYSCLK_DIV2         ((uint32_t)0x00000001)          /*!< SYSCLK divided by 2 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV4         ((uint32_t)0x00000002)          /*!< SYSCLK divided by 4 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV6         ((uint32_t)0x00000003)          /*!< SYSCLK divided by 6 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV8         ((uint32_t)0x00000004)          /*!< SYSCLK divided by 8 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV10        ((uint32_t)0x00000005)          /*!< SYSCLK divided by 10 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV12        ((uint32_t)0x00000006)          /*!< SYSCLK divided by 12 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV14        ((uint32_t)0x00000007)          /*!< SYSCLK divided by 14 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV16        ((uint32_t)0x00000008)          /*!< SYSCLK divided by 16 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV18        ((uint32_t)0x00000009)          /*!< SYSCLK divided by 18 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV20        ((uint32_t)0x0000000A)          /*!< SYSCLK divided by 20 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV22        ((uint32_t)0x0000000B)          /*!< SYSCLK divided by 22 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV24        ((uint32_t)0x0000000C)          /*!< SYSCLK divided by 24 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV26        ((uint32_t)0x0000000D)          /*!< SYSCLK divided by 26 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV28        ((uint32_t)0x0000000E)          /*!< SYSCLK divided by 28 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV30        ((uint32_t)0x0000000F)          /*!< SYSCLK divided by 30 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV32        ((uint32_t)0x00000010)          /*!< SYSCLK divided by 32 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV34        ((uint32_t)0x00000011)          /*!< SYSCLK divided by 34 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV36        ((uint32_t)0x00000012)          /*!< SYSCLK divided by 36 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV38        ((uint32_t)0x00000013)          /*!< SYSCLK divided by 38 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV40        ((uint32_t)0x00000014)          /*!< SYSCLK divided by 40 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV42        ((uint32_t)0x00000015)          /*!< SYSCLK divided by 42 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV44        ((uint32_t)0x00000016)          /*!< SYSCLK divided by 44 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV46        ((uint32_t)0x00000017)          /*!< SYSCLK divided by 46 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV48        ((uint32_t)0x00000018)          /*!< SYSCLK divided by 48 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV50        ((uint32_t)0x00000019)          /*!< SYSCLK divided by 50 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV52        ((uint32_t)0x0000001A)          /*!< SYSCLK divided by 52 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV54        ((uint32_t)0x0000001B)          /*!< SYSCLK divided by 54 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV56        ((uint32_t)0x0000001C)          /*!< SYSCLK divided by 56 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV58        ((uint32_t)0x0000001D)          /*!< SYSCLK divided by 58 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV60        ((uint32_t)0x0000001E)          /*!< SYSCLK divided by 60 */

#define SMARTCARD_PRESCALER_SYSCLK_DIV62        ((uint32_t)0x0000001F)          /*!< SYSCLK divided by 62 */

/**

  * @}

  */

/** @defgroup SMARTCARD_Flags    SMARTCARD Flags

  *        Elements values convention: 0xXXXX

  *           - 0xXXXX  : Flag mask in the SR register

  * @{

  */

#define SMARTCARD_FLAG_TXE                      ((uint32_t)USART_SR_TXE)

#define SMARTCARD_FLAG_TC                       ((uint32_t)USART_SR_TC)

#define SMARTCARD_FLAG_RXNE                     ((uint32_t)USART_SR_RXNE)

#define SMARTCARD_FLAG_IDLE                     ((uint32_t)USART_SR_IDLE)

#define SMARTCARD_FLAG_ORE                      ((uint32_t)USART_SR_ORE)

#define SMARTCARD_FLAG_NE                       ((uint32_t)USART_SR_NE)

#define SMARTCARD_FLAG_FE                       ((uint32_t)USART_SR_FE)

#define SMARTCARD_FLAG_PE                       ((uint32_t)USART_SR_PE)

/**

  * @}

  */

/** @defgroup SMARTCARD_Interrupt_definition     SMARTCARD Interrupts Definition

  *        Elements values convention: 0xY000XXXX

  *           - XXXX  : Interrupt mask (16 bits) in the Y register

  *           - Y  : Interrupt source register (4 bits)

  *                 - 0001: CR1 register

  *                 - 0010: CR3 register

  *

  * @{

  */

#define SMARTCARD_IT_PE                         ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_PEIE))

#define SMARTCARD_IT_TXE                        ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))

#define SMARTCARD_IT_TC                         ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TCIE))

#define SMARTCARD_IT_RXNE                       ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))

#define SMARTCARD_IT_IDLE                       ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))

#define SMARTCARD_IT_ERR                        ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28 | USART_CR3_EIE))

/**

  * @}

  */

/**

  * @}

  */

/* Exported macro ------------------------------------------------------------*/

/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros

  * @{

  */

/** @brief Reset SMARTCARD handle state

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)

/** @brief  Flush the Smartcard DR register

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)

/** @brief  Check whether the specified Smartcard flag is set or not.

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @param  __FLAG__: specifies the flag to check.

  *         This parameter can be one of the following values:

  *            @arg SMARTCARD_FLAG_TXE:  Transmit data register empty flag

  *            @arg SMARTCARD_FLAG_TC:   Transmission Complete flag

  *            @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag

  *            @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag

  *            @arg SMARTCARD_FLAG_ORE:  OverRun Error flag

  *            @arg SMARTCARD_FLAG_NE:   Noise Error flag

  *            @arg SMARTCARD_FLAG_FE:   Framing Error flag

  *            @arg SMARTCARD_FLAG_PE:   Parity Error flag

  * @retval The new state of __FLAG__ (TRUE or FALSE).

  */

#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))

/** @brief  Clear the specified Smartcard pending flags.

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @param  __FLAG__: specifies the flag to check.

  *         This parameter can be any combination of the following values:

  *            @arg SMARTCARD_FLAG_TC:   Transmission Complete flag.

  *            @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.

  * @retval None

  *  

  * @note   PE (Parity error), FE (Framing error), NE (Noise error) and ORE (OverRun

  *          error) flags are cleared by software sequence: a read operation to

  *          USART_SR register followed by a read operation to USART_DR register.

  * @note   RXNE flag can be also cleared by a read to the USART_DR register.

  * @note   TC flag can be also cleared by software sequence: a read operation to

  *          USART_SR register followed by a write operation to USART_DR register.

  * @note   TXE flag is cleared only by a write to the USART_DR register.

  *  

  * @retval None

  */

#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))

/** @brief  Clear the SMARTCARD PE pending flag.

  * @param  __HANDLE__: specifies the USART Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \

do{                                                        \

    __IO uint32_t tmpreg;                                  \

    tmpreg = (__HANDLE__)->Instance->SR;                   \

    tmpreg = (__HANDLE__)->Instance->DR;                   \

    UNUSED(tmpreg);                                        \

}while(0)  

/** @brief  Clear the SMARTCARD FE pending flag.

  * @param  __HANDLE__: specifies the USART Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)

/** @brief  Clear the SMARTCARD NE pending flag.

  * @param  __HANDLE__: specifies the USART Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)

/** @brief  Clear the SMARTCARD ORE pending flag.

  * @param  __HANDLE__: specifies the USART Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)

/** @brief  Clear the SMARTCARD IDLE pending flag.

  * @param  __HANDLE__: specifies the USART Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)

/** @brief  Enable the specified SmartCard interrupt.

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @param  __INTERRUPT__: specifies the SMARTCARD interrupt to enable.

  *          This parameter can be one of the following values:

  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt

  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt

  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt

  *            @arg SMARTCARD_IT_IDLE: Idle line detection interrupt

  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt

  *            @arg SMARTCARD_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)

  * @retval None

  */

#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((((__INTERRUPT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \

                                                               ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))

/** @brief  Disable the specified SmartCard interrupts.

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @param  __INTERRUPT__: specifies the SMARTCARD interrupt to disable.

  *          This parameter can be one of the following values:

  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt

  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt

  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt

  *            @arg SMARTCARD_IT_IDLE: Idle line detection interrupt

  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt

  *            @arg SMARTCARD_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)

  */

#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((((__INTERRUPT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \

                                                               ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))

/** @brief  Check whether the specified SmartCard interrupt has occurred or not.

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @param  __IT__: specifies the SMARTCARD interrupt source to check.

  *          This parameter can be one of the following values:

  *            @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt

  *            @arg SMARTCARD_IT_TC:  Transmission complete interrupt

  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt

  *            @arg SMARTCARD_IT_IDLE: Idle line detection interrupt

  *            @arg SMARTCARD_IT_ERR: Error interrupt

  *            @arg SMARTCARD_IT_PE: Parity Error interrupt

  * @retval The new state of __IT__ (TRUE or FALSE).

  */

#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))

/** @brief  Enable the USART associated to the SMARTCARD Handle

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_ENABLE(__HANDLE__)               (SET_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE))

/** @brief  Disable the USART associated to the SMARTCARD Handle

  * @param  __HANDLE__: specifies the SMARTCARD Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @retval None

  */

#define __HAL_SMARTCARD_DISABLE(__HANDLE__)              (CLEAR_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE))

/** @brief  Enable the SmartCard DMA request.

  * @param  __HANDLE__: specifies the SmartCard Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @param  __REQUEST__: specifies the SmartCard DMA request.

  *         This parameter can be one of the following values:

  *            @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request

  *            @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request

  * @retval None

  */

#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__)    (SET_BIT((__HANDLE__)->Instance->CR3, (__REQUEST__)))

/** @brief  Disable the SmartCard DMA request.

  * @param  __HANDLE__: specifies the SmartCard Handle.

  *         SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).

  * @param  __REQUEST__: specifies the SmartCard DMA request.

  *         This parameter can be one of the following values:

  *            @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request

  *            @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request

  * @retval None

  */

#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__)   (CLEAR_BIT((__HANDLE__)->Instance->CR3, (__REQUEST__)))

/**

  * @}

  */

/* Private macros --------------------------------------------------------*/

/** @defgroup SMARTCARD_Private_Macros   SMARTCARD Private Macros

  * @{

  */

#define SMARTCARD_CR1_REG_INDEX                 1    

#define SMARTCARD_CR3_REG_INDEX                 3    

#define SMARTCARD_DIV(__PCLK__, __BAUD__)                (((__PCLK__)*25)/(4*(__BAUD__)))

#define SMARTCARD_DIVMANT(__PCLK__, __BAUD__)            (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100)

#define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__)            (((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100)) * 16 + 50) / 100)

/* UART BRR = mantissa + overflow + fraction

            = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0F) */

#define SMARTCARD_BRR(_PCLK_, _BAUD_)            (((SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) << 4) + \

                                                  (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0)) + \

                                                  (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))

/** Check the Baud rate range.

  *         The maximum Baud Rate is derived from the maximum clock on APB (i.e. 72 MHz)

  *         divided by the smallest oversampling used on the USART (i.e. 16)

  *         __BAUDRATE__: Baud rate set by the configuration function.

  * Return : TRUE or FALSE

  */

#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)

#define IS_SMARTCARD_WORD_LENGTH(LENGTH)    ((LENGTH) == SMARTCARD_WORDLENGTH_9B)

#define IS_SMARTCARD_STOPBITS(STOPBITS)     (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \

                                             ((STOPBITS) == SMARTCARD_STOPBITS_1_5))

#define IS_SMARTCARD_PARITY(PARITY)         (((PARITY) == SMARTCARD_PARITY_EVEN) || \

                                             ((PARITY) == SMARTCARD_PARITY_ODD))

#define IS_SMARTCARD_MODE(MODE)             ((((MODE) & (~((uint32_t)SMARTCARD_MODE_TX_RX))) == 0x00) && \

                                             ((MODE) != (uint32_t)0x00000000))

#define IS_SMARTCARD_POLARITY(CPOL)         (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))

#define IS_SMARTCARD_PHASE(CPHA)            (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))

#define IS_SMARTCARD_LASTBIT(LASTBIT)       (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \

                                             ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))

#define IS_SMARTCARD_NACK_STATE(NACK)       (((NACK) == SMARTCARD_NACK_ENABLE) || \

                                             ((NACK) == SMARTCARD_NACK_DISABLE))

#define IS_SMARTCARD_PRESCALER(PRESCALER)   (((PRESCALER) >= SMARTCARD_PRESCALER_SYSCLK_DIV2) && \

                                             ((PRESCALER) <= SMARTCARD_PRESCALER_SYSCLK_DIV62) )

/** SMARTCARD interruptions flag mask

  *

  */

#define SMARTCARD_IT_MASK   ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \

                                        USART_CR1_IDLEIE | USART_CR3_EIE )

/**

  * @}

  */

/* Exported functions --------------------------------------------------------*/

/** @addtogroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions

  * @{

  */

/** @addtogroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions

  * @{

  */

/* Initialization/de-initialization functions  **********************************/

HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);

HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);

void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);

void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);

/**

  * @}

  */

/** @addtogroup SMARTCARD_Exported_Functions_Group2 IO operation functions

  * @{

  */

/* IO operation functions *******************************************************/

HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);

HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);

HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);

HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);

HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);

HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);

void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);

void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);

void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);

void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);

/**

  * @}

  */

/** @addtogroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions

  * @{

  */

/* Peripheral State and Errors functions functions  *****************************/

HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);

uint32_t                   HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);

/**

  * @}

  */

/**

  * @}

  */

/**

  * @}

  */

/**

  * @}

  */

#ifdef __cplusplus

}

#endif

#endif /* __STM32F1xx_HAL_SMARTCARD_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/