Rev 2 | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 2 | mjames | 1 | /** |
| 2 | ****************************************************************************** |
||
| 3 | * @file stm32f1xx_hal_rtc_ex.h |
||
| 4 | * @author MCD Application Team |
||
| 5 | mjames | 5 | * @version V1.0.4 |
| 6 | * @date 29-April-2016 |
||
| 2 | mjames | 7 | * @brief Header file of RTC HAL Extension module. |
| 8 | ****************************************************************************** |
||
| 9 | * @attention |
||
| 10 | * |
||
| 5 | mjames | 11 | * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> |
| 2 | mjames | 12 | * |
| 13 | * Redistribution and use in source and binary forms, with or without modification, |
||
| 14 | * are permitted provided that the following conditions are met: |
||
| 15 | * 1. Redistributions of source code must retain the above copyright notice, |
||
| 16 | * this list of conditions and the following disclaimer. |
||
| 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
||
| 18 | * this list of conditions and the following disclaimer in the documentation |
||
| 19 | * and/or other materials provided with the distribution. |
||
| 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
||
| 21 | * may be used to endorse or promote products derived from this software |
||
| 22 | * without specific prior written permission. |
||
| 23 | * |
||
| 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
| 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
| 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
||
| 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
||
| 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
||
| 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
||
| 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
||
| 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
||
| 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
||
| 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
||
| 34 | * |
||
| 35 | ****************************************************************************** |
||
| 36 | */ |
||
| 37 | |||
| 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
||
| 39 | #ifndef __STM32F1xx_HAL_RTC_EX_H |
||
| 40 | #define __STM32F1xx_HAL_RTC_EX_H |
||
| 41 | |||
| 42 | #ifdef __cplusplus |
||
| 43 | extern "C" { |
||
| 44 | #endif |
||
| 45 | |||
| 46 | /* Includes ------------------------------------------------------------------*/ |
||
| 47 | #include "stm32f1xx_hal_def.h" |
||
| 48 | |||
| 49 | /** @addtogroup STM32F1xx_HAL_Driver |
||
| 50 | * @{ |
||
| 51 | */ |
||
| 52 | |||
| 53 | /** @addtogroup RTCEx |
||
| 54 | * @{ |
||
| 55 | */ |
||
| 56 | |||
| 57 | /** @addtogroup RTCEx_Private_Macros |
||
| 58 | * @{ |
||
| 59 | */ |
||
| 60 | |||
| 61 | /** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy |
||
| 62 | * @{ |
||
| 63 | */ |
||
| 64 | #define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler |
||
| 65 | |||
| 66 | /** |
||
| 67 | * @} |
||
| 68 | */ |
||
| 69 | |||
| 70 | /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters |
||
| 71 | * @{ |
||
| 72 | */ |
||
| 73 | #define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1) |
||
| 74 | |||
| 75 | #define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ |
||
| 76 | ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) |
||
| 77 | |||
| 78 | #if RTC_BKP_NUMBER > 10 |
||
| 79 | #define IS_RTC_BKP(BKP) (((BKP) <= (uint32_t) RTC_BKP_DR10) || (((BKP) >= (uint32_t) RTC_BKP_DR11) && ((BKP) <= (uint32_t) RTC_BKP_DR42))) |
||
| 80 | #else |
||
| 81 | #define IS_RTC_BKP(BKP) ((BKP) <= (uint32_t) RTC_BKP_NUMBER) |
||
| 82 | #endif |
||
| 83 | #define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007F) |
||
| 84 | |||
| 85 | /** |
||
| 86 | * @} |
||
| 87 | */ |
||
| 88 | |||
| 89 | /** |
||
| 90 | * @} |
||
| 91 | */ |
||
| 92 | |||
| 93 | /* Exported types ------------------------------------------------------------*/ |
||
| 94 | /** @defgroup RTCEx_Exported_Types RTCEx Exported Types |
||
| 95 | * @{ |
||
| 96 | */ |
||
| 97 | /** |
||
| 98 | * @brief RTC Tamper structure definition |
||
| 99 | */ |
||
| 100 | typedef struct |
||
| 101 | { |
||
| 102 | uint32_t Tamper; /*!< Specifies the Tamper Pin. |
||
| 103 | This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ |
||
| 104 | |||
| 105 | uint32_t Trigger; /*!< Specifies the Tamper Trigger. |
||
| 106 | This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ |
||
| 107 | |||
| 108 | }RTC_TamperTypeDef; |
||
| 109 | |||
| 110 | /** |
||
| 111 | * @} |
||
| 112 | */ |
||
| 113 | |||
| 114 | /* Exported constants --------------------------------------------------------*/ |
||
| 115 | /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants |
||
| 116 | * @{ |
||
| 117 | */ |
||
| 118 | |||
| 119 | /** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions |
||
| 120 | * @{ |
||
| 121 | */ |
||
| 122 | #define RTC_TAMPER_1 BKP_CR_TPE /*!< Select tamper to be enabled (mainly for legacy purposes) */ |
||
| 123 | |||
| 124 | /** |
||
| 125 | * @} |
||
| 126 | */ |
||
| 127 | |||
| 128 | /** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions |
||
| 129 | * @{ |
||
| 130 | */ |
||
| 131 | #define RTC_TAMPERTRIGGER_LOWLEVEL BKP_CR_TPAL /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */ |
||
| 132 | #define RTC_TAMPERTRIGGER_HIGHLEVEL ((uint32_t)0x00000000) /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */ |
||
| 133 | |||
| 134 | /** |
||
| 135 | * @} |
||
| 136 | */ |
||
| 137 | |||
| 138 | /** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions |
||
| 139 | * @{ |
||
| 140 | */ |
||
| 141 | #if RTC_BKP_NUMBER > 0 |
||
| 142 | #define RTC_BKP_DR1 ((uint32_t)0x00000001) |
||
| 143 | #define RTC_BKP_DR2 ((uint32_t)0x00000002) |
||
| 144 | #define RTC_BKP_DR3 ((uint32_t)0x00000003) |
||
| 145 | #define RTC_BKP_DR4 ((uint32_t)0x00000004) |
||
| 146 | #define RTC_BKP_DR5 ((uint32_t)0x00000005) |
||
| 147 | #define RTC_BKP_DR6 ((uint32_t)0x00000006) |
||
| 148 | #define RTC_BKP_DR7 ((uint32_t)0x00000007) |
||
| 149 | #define RTC_BKP_DR8 ((uint32_t)0x00000008) |
||
| 150 | #define RTC_BKP_DR9 ((uint32_t)0x00000009) |
||
| 151 | #define RTC_BKP_DR10 ((uint32_t)0x0000000A) |
||
| 152 | #endif /* RTC_BKP_NUMBER > 0 */ |
||
| 153 | |||
| 154 | #if RTC_BKP_NUMBER > 10 |
||
| 155 | #define RTC_BKP_DR11 ((uint32_t)0x00000010) |
||
| 156 | #define RTC_BKP_DR12 ((uint32_t)0x00000011) |
||
| 157 | #define RTC_BKP_DR13 ((uint32_t)0x00000012) |
||
| 158 | #define RTC_BKP_DR14 ((uint32_t)0x00000013) |
||
| 159 | #define RTC_BKP_DR15 ((uint32_t)0x00000014) |
||
| 160 | #define RTC_BKP_DR16 ((uint32_t)0x00000015) |
||
| 161 | #define RTC_BKP_DR17 ((uint32_t)0x00000016) |
||
| 162 | #define RTC_BKP_DR18 ((uint32_t)0x00000017) |
||
| 163 | #define RTC_BKP_DR19 ((uint32_t)0x00000018) |
||
| 164 | #define RTC_BKP_DR20 ((uint32_t)0x00000019) |
||
| 165 | #define RTC_BKP_DR21 ((uint32_t)0x0000001A) |
||
| 166 | #define RTC_BKP_DR22 ((uint32_t)0x0000001B) |
||
| 167 | #define RTC_BKP_DR23 ((uint32_t)0x0000001C) |
||
| 168 | #define RTC_BKP_DR24 ((uint32_t)0x0000001D) |
||
| 169 | #define RTC_BKP_DR25 ((uint32_t)0x0000001E) |
||
| 170 | #define RTC_BKP_DR26 ((uint32_t)0x0000001F) |
||
| 171 | #define RTC_BKP_DR27 ((uint32_t)0x00000020) |
||
| 172 | #define RTC_BKP_DR28 ((uint32_t)0x00000021) |
||
| 173 | #define RTC_BKP_DR29 ((uint32_t)0x00000022) |
||
| 174 | #define RTC_BKP_DR30 ((uint32_t)0x00000023) |
||
| 175 | #define RTC_BKP_DR31 ((uint32_t)0x00000024) |
||
| 176 | #define RTC_BKP_DR32 ((uint32_t)0x00000025) |
||
| 177 | #define RTC_BKP_DR33 ((uint32_t)0x00000026) |
||
| 178 | #define RTC_BKP_DR34 ((uint32_t)0x00000027) |
||
| 179 | #define RTC_BKP_DR35 ((uint32_t)0x00000028) |
||
| 180 | #define RTC_BKP_DR36 ((uint32_t)0x00000029) |
||
| 181 | #define RTC_BKP_DR37 ((uint32_t)0x0000002A) |
||
| 182 | #define RTC_BKP_DR38 ((uint32_t)0x0000002B) |
||
| 183 | #define RTC_BKP_DR39 ((uint32_t)0x0000002C) |
||
| 184 | #define RTC_BKP_DR40 ((uint32_t)0x0000002D) |
||
| 185 | #define RTC_BKP_DR41 ((uint32_t)0x0000002E) |
||
| 186 | #define RTC_BKP_DR42 ((uint32_t)0x0000002F) |
||
| 187 | #endif /* RTC_BKP_NUMBER > 10 */ |
||
| 188 | |||
| 189 | /** |
||
| 190 | * @} |
||
| 191 | */ |
||
| 192 | |||
| 193 | /** |
||
| 194 | * @} |
||
| 195 | */ |
||
| 196 | |||
| 197 | /* Exported macro ------------------------------------------------------------*/ |
||
| 198 | /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros |
||
| 199 | * @{ |
||
| 200 | */ |
||
| 201 | |||
| 202 | /** |
||
| 203 | * @brief Enable the RTC Tamper interrupt. |
||
| 204 | * @param __HANDLE__: specifies the RTC handle. |
||
| 205 | * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled |
||
| 206 | * This parameter can be any combination of the following values: |
||
| 207 | * @arg RTC_IT_TAMP1: Tamper A interrupt |
||
| 208 | * @retval None |
||
| 209 | */ |
||
| 210 | #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__)) |
||
| 211 | |||
| 212 | /** |
||
| 213 | * @brief Disable the RTC Tamper interrupt. |
||
| 214 | * @param __HANDLE__: specifies the RTC handle. |
||
| 215 | * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled. |
||
| 216 | * This parameter can be any combination of the following values: |
||
| 217 | * @arg RTC_IT_TAMP1: Tamper A interrupt |
||
| 218 | * @retval None |
||
| 219 | */ |
||
| 220 | #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(BKP->CSR, (__INTERRUPT__)) |
||
| 221 | |||
| 222 | /** |
||
| 223 | * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. |
||
| 224 | * @param __HANDLE__: specifies the RTC handle. |
||
| 225 | * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked. |
||
| 226 | * This parameter can be: |
||
| 227 | * @arg RTC_IT_TAMP1 |
||
| 228 | * @retval None |
||
| 229 | */ |
||
| 230 | #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET) |
||
| 231 | |||
| 232 | /** |
||
| 233 | * @brief Get the selected RTC Tamper's flag status. |
||
| 234 | * @param __HANDLE__: specifies the RTC handle. |
||
| 235 | * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. |
||
| 236 | * This parameter can be: |
||
| 237 | * @arg RTC_FLAG_TAMP1F |
||
| 238 | * @retval None |
||
| 239 | */ |
||
| 240 | #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET) |
||
| 241 | |||
| 242 | /** |
||
| 243 | * @brief Get the selected RTC Tamper's flag status. |
||
| 244 | * @param __HANDLE__: specifies the RTC handle. |
||
| 245 | * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked. |
||
| 246 | * This parameter can be: |
||
| 247 | * @arg RTC_IT_TAMP1 |
||
| 248 | * @retval None |
||
| 249 | */ |
||
| 250 | #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET) |
||
| 251 | |||
| 252 | /** |
||
| 253 | * @brief Clear the RTC Tamper's pending flags. |
||
| 254 | * @param __HANDLE__: specifies the RTC handle. |
||
| 255 | * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. |
||
| 256 | * This parameter can be: |
||
| 257 | * @arg RTC_FLAG_TAMP1F |
||
| 258 | * @retval None |
||
| 259 | */ |
||
| 260 | #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI) |
||
| 261 | |||
| 262 | /** |
||
| 263 | * @brief Enable the RTC Second interrupt. |
||
| 264 | * @param __HANDLE__: specifies the RTC handle. |
||
| 265 | * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled |
||
| 266 | * This parameter can be any combination of the following values: |
||
| 267 | * @arg RTC_IT_SEC: Second A interrupt |
||
| 268 | * @retval None |
||
| 269 | */ |
||
| 270 | #define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) |
||
| 271 | |||
| 272 | /** |
||
| 273 | * @brief Disable the RTC Second interrupt. |
||
| 274 | * @param __HANDLE__: specifies the RTC handle. |
||
| 275 | * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled. |
||
| 276 | * This parameter can be any combination of the following values: |
||
| 277 | * @arg RTC_IT_SEC: Second A interrupt |
||
| 278 | * @retval None |
||
| 279 | */ |
||
| 280 | #define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) |
||
| 281 | |||
| 282 | /** |
||
| 283 | * @brief Check whether the specified RTC Second interrupt has occurred or not. |
||
| 284 | * @param __HANDLE__: specifies the RTC handle. |
||
| 285 | * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled. |
||
| 286 | * This parameter can be: |
||
| 287 | * @arg RTC_IT_SEC: Second A interrupt |
||
| 288 | * @retval None |
||
| 289 | */ |
||
| 290 | #define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET) |
||
| 291 | |||
| 292 | /** |
||
| 293 | * @brief Get the selected RTC Second's flag status. |
||
| 294 | * @param __HANDLE__: specifies the RTC handle. |
||
| 295 | * @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled. |
||
| 296 | * This parameter can be: |
||
| 297 | * @arg RTC_FLAG_SEC |
||
| 298 | * @retval None |
||
| 299 | */ |
||
| 300 | #define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET) |
||
| 301 | |||
| 302 | /** |
||
| 303 | * @brief Clear the RTC Second's pending flags. |
||
| 304 | * @param __HANDLE__: specifies the RTC handle. |
||
| 305 | * @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled. |
||
| 306 | * This parameter can be: |
||
| 307 | * @arg RTC_FLAG_SEC |
||
| 308 | * @retval None |
||
| 309 | */ |
||
| 310 | #define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__) |
||
| 311 | |||
| 312 | /** |
||
| 313 | * @brief Enable the RTC Overflow interrupt. |
||
| 314 | * @param __HANDLE__: specifies the RTC handle. |
||
| 315 | * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled |
||
| 316 | * This parameter can be any combination of the following values: |
||
| 317 | * @arg RTC_IT_OW: Overflow A interrupt |
||
| 318 | * @retval None |
||
| 319 | */ |
||
| 320 | #define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) |
||
| 321 | |||
| 322 | /** |
||
| 323 | * @brief Disable the RTC Overflow interrupt. |
||
| 324 | * @param __HANDLE__: specifies the RTC handle. |
||
| 325 | * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled. |
||
| 326 | * This parameter can be any combination of the following values: |
||
| 327 | * @arg RTC_IT_OW: Overflow A interrupt |
||
| 328 | * @retval None |
||
| 329 | */ |
||
| 330 | #define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) |
||
| 331 | |||
| 332 | /** |
||
| 333 | * @brief Check whether the specified RTC Overflow interrupt has occurred or not. |
||
| 334 | * @param __HANDLE__: specifies the RTC handle. |
||
| 335 | * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled. |
||
| 336 | * This parameter can be: |
||
| 337 | * @arg RTC_IT_OW: Overflow A interrupt |
||
| 338 | * @retval None |
||
| 339 | */ |
||
| 340 | #define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET) |
||
| 341 | |||
| 342 | /** |
||
| 343 | * @brief Get the selected RTC Overflow's flag status. |
||
| 344 | * @param __HANDLE__: specifies the RTC handle. |
||
| 345 | * @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled. |
||
| 346 | * This parameter can be: |
||
| 347 | * @arg RTC_FLAG_OW |
||
| 348 | * @retval None |
||
| 349 | */ |
||
| 350 | #define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET) |
||
| 351 | |||
| 352 | /** |
||
| 353 | * @brief Clear the RTC Overflow's pending flags. |
||
| 354 | * @param __HANDLE__: specifies the RTC handle. |
||
| 355 | * @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled. |
||
| 356 | * This parameter can be: |
||
| 357 | * @arg RTC_FLAG_OW |
||
| 358 | * @retval None |
||
| 359 | */ |
||
| 360 | #define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__) |
||
| 361 | |||
| 362 | /** |
||
| 363 | * @} |
||
| 364 | */ |
||
| 365 | |||
| 366 | /* Exported functions --------------------------------------------------------*/ |
||
| 367 | /** @addtogroup RTCEx_Exported_Functions |
||
| 368 | * @{ |
||
| 369 | */ |
||
| 370 | |||
| 371 | /* RTC Tamper functions *****************************************/ |
||
| 372 | /** @addtogroup RTCEx_Exported_Functions_Group1 |
||
| 373 | * @{ |
||
| 374 | */ |
||
| 375 | HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); |
||
| 376 | HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); |
||
| 377 | HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); |
||
| 378 | void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc); |
||
| 379 | void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); |
||
| 380 | HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
||
| 381 | |||
| 382 | /** |
||
| 383 | * @} |
||
| 384 | */ |
||
| 385 | |||
| 386 | /* RTC Second functions *****************************************/ |
||
| 387 | /** @addtogroup RTCEx_Exported_Functions_Group2 |
||
| 388 | * @{ |
||
| 389 | */ |
||
| 390 | HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc); |
||
| 391 | HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc); |
||
| 392 | void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef* hrtc); |
||
| 393 | void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc); |
||
| 394 | void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc); |
||
| 395 | |||
| 396 | /** |
||
| 397 | * @} |
||
| 398 | */ |
||
| 399 | |||
| 400 | /* Extension Control functions ************************************************/ |
||
| 401 | /** @addtogroup RTCEx_Exported_Functions_Group3 |
||
| 402 | * @{ |
||
| 403 | */ |
||
| 404 | void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); |
||
| 405 | uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); |
||
| 406 | |||
| 407 | HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue); |
||
| 408 | /** |
||
| 409 | * @} |
||
| 410 | */ |
||
| 411 | |||
| 412 | /** |
||
| 413 | * @} |
||
| 414 | */ |
||
| 415 | |||
| 416 | /** |
||
| 417 | * @} |
||
| 418 | */ |
||
| 419 | |||
| 420 | /** |
||
| 421 | * @} |
||
| 422 | */ |
||
| 423 | |||
| 424 | #ifdef __cplusplus |
||
| 425 | } |
||
| 426 | #endif |
||
| 427 | |||
| 428 | #endif /* __STM32F1xx_HAL_RTC_EX_H */ |
||
| 429 | |||
| 430 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |