Subversion Repositories testOled

Rev

Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
2 mjames 1 
/**
2 
  ******************************************************************************
3 
  * @file    stm32f1xx_hal_can_ex_legacy.h
4 
  * @author  MCD Application Team
5 
  * @brief   Header file of CAN HAL Extension module.
6 
  ******************************************************************************
7 
  * @attention
8 
  *
9 
  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
10 
  * All rights reserved.</center></h2>
11 
  *
12 
  * This software component is licensed by ST under BSD 3-Clause license,
13 
  * the "License"; You may not use this file except in compliance with the
14 
  * License. You may obtain a copy of the License at:
15 
  *                        opensource.org/licenses/BSD-3-Clause
16 
  *
17 
  ******************************************************************************
18 
  */
19 
 
20 
/* Define to prevent recursive inclusion -------------------------------------*/
21 
#ifndef __STM32F1xx_HAL_CAN_EX_LEGACY_H
22 
#define __STM32F1xx_HAL_CAN_EX_LEGACY_H
23 
 
24 
#ifdef __cplusplus
25 
 extern "C" {
26 
#endif
27 
 
28 
#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
29 
    defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
30 
 
31 
/* Includes ------------------------------------------------------------------*/
32 
#include "stm32f1xx_hal_def.h"
33 
 
34 
/** @addtogroup STM32F1xx_HAL_Driver
35 
  * @{
36 
  */
37 
 
38 
/** @defgroup CANEx CANEx
39 
  * @{
40 
  */
41 
 
42 
/* Exported types ------------------------------------------------------------*/
43 
 
44 
/**
45 
  * @brief  CAN filter configuration structure definition
46 
  */
47 
/* CAN filter banks differences over STM32F1 devices:                         */
48 
/* - STM32F1 Connectivity line: 28 filter banks shared between CAN1 and CAN2  */
49 
/* - Other STM32F10x devices:   14 filter banks                               */
50 
 
51 
typedef struct
52 
{
53 
  uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
54 
                                       configuration, first one for a 16-bit configuration).
55 
                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
56 
 
57 
  uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
58 
                                       configuration, second one for a 16-bit configuration).
59 
                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
60 
 
61 
  uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
62 
                                       according to the mode (MSBs for a 32-bit configuration,
63 
                                       first one for a 16-bit configuration).
64 
                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
65 
 
66 
  uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
67 
                                       according to the mode (LSBs for a 32-bit configuration,
68 
                                       second one for a 16-bit configuration).
69 
                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
70 
 
71 
  uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
72 
                                       This parameter can be a value of @ref CAN_filter_FIFO */
73 
#if defined(STM32F105xC) || defined(STM32F107xC)
74 
  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized.
75 
                                       This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
76 
#else
77 
  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized.
78 
                                       This parameter must be a number between Min_Data = 0 and Max_Data = 13. */
79 
#endif /* STM32F105xC || STM32F107xC */
80 
  uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
81 
                                       This parameter can be a value of @ref CAN_filter_mode */
82 
 
83 
  uint32_t FilterScale;           /*!< Specifies the filter scale.
84 
                                       This parameter can be a value of @ref CAN_filter_scale */
85 
 
86 
  uint32_t FilterActivation;      /*!< Enable or disable the filter.
87 
                                       This parameter can be set to ENABLE or DISABLE. */
88 
 
89 
  uint32_t BankNumber;            /*!< Select the start slave bank filter
90 
                                       This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
91 
 
92 
}CAN_FilterConfTypeDef;
93 
 
94 
/* Exported constants --------------------------------------------------------*/
95 
/* Exported macro ------------------------------------------------------------*/
96 
/* Private macro -------------------------------------------------------------*/
97 
 
98 
/** @defgroup CANEx_Private_Macros CAN Extended Private Macros
99 
  * @{
100 
  */
101 
#if defined(STM32F105xC) || defined(STM32F107xC)
102 
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U)
103 
#else
104 
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13U)
105 
#endif /* STM32F105xC || STM32F107xC */
106 
 
107 
/**
108 
  * @}
109 
  */
110 
 
111 
 
112 
/**
113 
  * @}
114 
  */
115 
 
116 
/**
117 
  * @}
118 
  */
119 
 
120 
#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC    */
121 
 
122 
#ifdef __cplusplus
123 
}
124 
#endif
125 
 
126 
#endif /* __STM32F1xx_HAL_CAN_EX_LEGACY_H */
127 
 
128 
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/