Subversion Repositories ScreenTimer

/**

  ******************************************************************************

  * @file    stm32f0xx_ll_i2c.c

  * @author  MCD Application Team

  * @brief   I2C LL module driver.

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

  * All rights reserved.</center></h2>

  *

  * This software component is licensed by ST under BSD 3-Clause license,

  * the "License"; You may not use this file except in compliance with the

  * License. You may obtain a copy of the License at:

  *                        opensource.org/licenses/BSD-3-Clause

  *

  ******************************************************************************

  */

#if defined(USE_FULL_LL_DRIVER)

/* Includes ------------------------------------------------------------------*/

#include "stm32f0xx_ll_i2c.h"

#include "stm32f0xx_ll_bus.h"

#ifdef  USE_FULL_ASSERT

#include "stm32_assert.h"

#else

#define assert_param(expr) ((void)0U)

#endif /* USE_FULL_ASSERT */

/** @addtogroup STM32F0xx_LL_Driver

  * @{

  */

#if defined (I2C1) || defined (I2C2)

/** @defgroup I2C_LL I2C

  * @{

  */

/* Private types -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

/* Private constants ---------------------------------------------------------*/

/* Private macros ------------------------------------------------------------*/

/** @addtogroup I2C_LL_Private_Macros

  * @{

  */

#define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__)    (((__VALUE__) == LL_I2C_MODE_I2C)          || \

                                                 ((__VALUE__) == LL_I2C_MODE_SMBUS_HOST)   || \

                                                 ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \

                                                 ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP))

#define IS_LL_I2C_ANALOG_FILTER(__VALUE__)      (((__VALUE__) == LL_I2C_ANALOGFILTER_ENABLE) || \

                                                 ((__VALUE__) == LL_I2C_ANALOGFILTER_DISABLE))

#define IS_LL_I2C_DIGITAL_FILTER(__VALUE__)     ((__VALUE__) <= 0x0000000FU)

#define IS_LL_I2C_OWN_ADDRESS1(__VALUE__)       ((__VALUE__) <= 0x000003FFU)

#define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__)   (((__VALUE__) == LL_I2C_ACK) || \

                                                 ((__VALUE__) == LL_I2C_NACK))

#define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__)       (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \

                                                 ((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT))

/**

  * @}

  */

/* Private function prototypes -----------------------------------------------*/

/* Exported functions --------------------------------------------------------*/

/** @addtogroup I2C_LL_Exported_Functions

  * @{

  */

/** @addtogroup I2C_LL_EF_Init

  * @{

  */

/**

  * @brief  De-initialize the I2C registers to their default reset values.

  * @param  I2Cx I2C Instance.

  * @retval An ErrorStatus enumeration value:

  *          - SUCCESS: I2C registers are de-initialized

  *          - ERROR: I2C registers are not de-initialized

  */

ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx)

{

  ErrorStatus status = SUCCESS;

  /* Check the I2C Instance I2Cx */

  assert_param(IS_I2C_ALL_INSTANCE(I2Cx));

  if (I2Cx == I2C1)

  {

    /* Force reset of I2C clock */

    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1);

    /* Release reset of I2C clock */

    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1);

  }

#if defined(I2C2)

  else if (I2Cx == I2C2)

  {

    /* Force reset of I2C clock */

    LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2);

    /* Release reset of I2C clock */

    LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2);

  }

#endif /* I2C2 */

  else

  {

    status = ERROR;

  }

  return status;

}

/**

  * @brief  Initialize the I2C registers according to the specified parameters in I2C_InitStruct.

  * @param  I2Cx I2C Instance.

  * @param  I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure.

  * @retval An ErrorStatus enumeration value:

  *          - SUCCESS: I2C registers are initialized

  *          - ERROR: Not applicable

  */

ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct)

{

  /* Check the I2C Instance I2Cx */

  assert_param(IS_I2C_ALL_INSTANCE(I2Cx));

  /* Check the I2C parameters from I2C_InitStruct */

  assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode));

  assert_param(IS_LL_I2C_ANALOG_FILTER(I2C_InitStruct->AnalogFilter));

  assert_param(IS_LL_I2C_DIGITAL_FILTER(I2C_InitStruct->DigitalFilter));

  assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1));

  assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge));

  assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize));

  /* Disable the selected I2Cx Peripheral */

  LL_I2C_Disable(I2Cx);

  /*---------------------------- I2Cx CR1 Configuration ------------------------

   * Configure the analog and digital noise filters with parameters :

   * - AnalogFilter: I2C_CR1_ANFOFF bit

   * - DigitalFilter: I2C_CR1_DNF[3:0] bits

   */

  LL_I2C_ConfigFilters(I2Cx, I2C_InitStruct->AnalogFilter, I2C_InitStruct->DigitalFilter);

  /*---------------------------- I2Cx TIMINGR Configuration --------------------

   * Configure the SDA setup, hold time and the SCL high, low period with parameter :

   * - Timing: I2C_TIMINGR_PRESC[3:0], I2C_TIMINGR_SCLDEL[3:0], I2C_TIMINGR_SDADEL[3:0],

   *           I2C_TIMINGR_SCLH[7:0] and I2C_TIMINGR_SCLL[7:0] bits

   */

  LL_I2C_SetTiming(I2Cx, I2C_InitStruct->Timing);

  /* Enable the selected I2Cx Peripheral */

  LL_I2C_Enable(I2Cx);

  /*---------------------------- I2Cx OAR1 Configuration -----------------------

   * Disable, Configure and Enable I2Cx device own address 1 with parameters :

   * - OwnAddress1:  I2C_OAR1_OA1[9:0] bits

   * - OwnAddrSize:  I2C_OAR1_OA1MODE bit

   */

  LL_I2C_DisableOwnAddress1(I2Cx);

  LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize);

  /* OwnAdress1 == 0 is reserved for General Call address */

  if (I2C_InitStruct->OwnAddress1 != 0U)

  {

    LL_I2C_EnableOwnAddress1(I2Cx);

  }

  /*---------------------------- I2Cx MODE Configuration -----------------------

  * Configure I2Cx peripheral mode with parameter :

   * - PeripheralMode: I2C_CR1_SMBDEN and I2C_CR1_SMBHEN bits

   */

  LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode);

  /*---------------------------- I2Cx CR2 Configuration ------------------------

   * Configure the ACKnowledge or Non ACKnowledge condition

   * after the address receive match code or next received byte with parameter :

   * - TypeAcknowledge: I2C_CR2_NACK bit

   */

  LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge);

  return SUCCESS;

}

/**

  * @brief  Set each @ref LL_I2C_InitTypeDef field to default value.

  * @param  I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure.

  * @retval None

  */

void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct)

{

  /* Set I2C_InitStruct fields to default values */

  I2C_InitStruct->PeripheralMode  = LL_I2C_MODE_I2C;

  I2C_InitStruct->Timing          = 0U;

  I2C_InitStruct->AnalogFilter    = LL_I2C_ANALOGFILTER_ENABLE;

  I2C_InitStruct->DigitalFilter   = 0U;

  I2C_InitStruct->OwnAddress1     = 0U;

  I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK;

  I2C_InitStruct->OwnAddrSize     = LL_I2C_OWNADDRESS1_7BIT;

}

/**

  * @}

  */

/**

  * @}

  */

/**

  * @}

  */

#endif /* I2C1 || I2C2 */

/**

  * @}

  */

#endif /* USE_FULL_LL_DRIVER */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/