Subversion Repositories FuelGauge

/**

  ******************************************************************************

  * @file    stm32f0xx_hal.c

  * @author  MCD Application Team

  * @brief   HAL module driver.

  *          This is the common part of the HAL initialization

  *

  @verbatim

  ==============================================================================

                     ##### How to use this driver #####

  ==============================================================================

    [..]

    The common HAL driver contains a set of generic and common APIs that can be

    used by the PPP peripheral drivers and the user to start using the HAL.

    [..]

    The HAL contains two APIs categories:

         (+) HAL Initialization and de-initialization functions

         (+) HAL Control functions

  @endverbatim

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

  * All rights reserved.</center></h2>

  *

  * This software component is licensed by ST under BSD 3-Clause license,

  * the "License"; You may not use this file except in compliance with the

  * License. You may obtain a copy of the License at:

  *                        opensource.org/licenses/BSD-3-Clause

  *

  ******************************************************************************

  */

/* Includes ------------------------------------------------------------------*/

#include "stm32f0xx_hal.h"

/** @addtogroup STM32F0xx_HAL_Driver

  * @{

  */

/** @defgroup HAL HAL

  * @brief HAL module driver.

  * @{

  */

#ifdef HAL_MODULE_ENABLED

/* Private typedef -----------------------------------------------------------*/

/* Private define ------------------------------------------------------------*/

/** @defgroup HAL_Private_Constants HAL Private Constants

  * @{

  */

/**

  * @brief STM32F0xx HAL Driver version number V1.7.3

  */

#define __STM32F0xx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */

#define __STM32F0xx_HAL_VERSION_SUB1   (0x07U) /*!< [23:16] sub1 version */

#define __STM32F0xx_HAL_VERSION_SUB2   (0x03U) /*!< [15:8]  sub2 version */

#define __STM32F0xx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */ 

#define __STM32F0xx_HAL_VERSION         ((__STM32F0xx_HAL_VERSION_MAIN << 24U)\

                                        |(__STM32F0xx_HAL_VERSION_SUB1 << 16U)\

                                        |(__STM32F0xx_HAL_VERSION_SUB2 << 8U )\

                                        |(__STM32F0xx_HAL_VERSION_RC))

#define IDCODE_DEVID_MASK    (0x00000FFFU)

/**

  * @}

  */

/* Private macro -------------------------------------------------------------*/

/** @defgroup HAL_Private_Macros HAL Private Macros

  * @{

  */

/**

  * @}

  */

/* Exported variables ---------------------------------------------------------*/

/** @defgroup HAL_Private_Variables HAL Exported Variables

  * @{

  */

__IO uint32_t uwTick;

uint32_t uwTickPrio   = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */

HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT;  /* 1KHz */

/**

  * @}

  */

/* Private function prototypes -----------------------------------------------*/

/* Exported functions ---------------------------------------------------------*/

/** @defgroup HAL_Exported_Functions HAL Exported Functions

  * @{

  */

/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions

  * @brief    Initialization and de-initialization functions

  *

@verbatim

 ===============================================================================

              ##### Initialization and de-initialization functions #####

 ===============================================================================

   [..]  This section provides functions allowing to:

      (+) Initializes the Flash interface, the NVIC allocation and initial clock

          configuration. It initializes the systick also when timeout is needed

          and the backup domain when enabled.

      (+) de-Initializes common part of the HAL.

      (+) Configure The time base source to have 1ms time base with a dedicated

          Tick interrupt priority.

        (++) SysTick timer is used by default as source of time base, but user

             can eventually implement his proper time base source (a general purpose

             timer for example or other time source), keeping in mind that Time base

             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and

             handled in milliseconds basis.

        (++) Time base configuration function (HAL_InitTick ()) is called automatically

             at the beginning of the program after reset by HAL_Init() or at any time

             when clock is configured, by HAL_RCC_ClockConfig().

        (++) Source of time base is configured  to generate interrupts at regular

             time intervals. Care must be taken if HAL_Delay() is called from a

             peripheral ISR process, the Tick interrupt line must have higher priority

            (numerically lower) than the peripheral interrupt. Otherwise the caller

            ISR process will be blocked.

       (++) functions affecting time base configurations are declared as __Weak  

             to make  override possible  in case of other  implementations in user file.

@endverbatim

  * @{

  */

/**

  * @brief  This function configures the Flash prefetch,

  *        Configures time base source, NVIC and Low level hardware

  * @note This function is called at the beginning of program after reset and before

  *       the clock configuration

  * @note The time base configuration is based on HSI clock when exiting from Reset.

  *       Once done, time base tick start incrementing.

  *       In the default implementation,Systick is used as source of time base.

  *       The tick variable is incremented each 1ms in its ISR.

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_Init(void)

{

  /* Configure Flash prefetch */

#if (PREFETCH_ENABLE != 0)

  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();

#endif /* PREFETCH_ENABLE */

  /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */

  HAL_InitTick(TICK_INT_PRIORITY);

  /* Init the low level hardware */

  HAL_MspInit();

  /* Return function status */

  return HAL_OK;

}

/**

  * @brief This function de-Initialize common part of the HAL and stops the SysTick

  *        of time base.

  * @note This function is optional.

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_DeInit(void)

{

  /* Reset of all peripherals */

  __HAL_RCC_APB1_FORCE_RESET();

  __HAL_RCC_APB1_RELEASE_RESET();

  __HAL_RCC_APB2_FORCE_RESET();

  __HAL_RCC_APB2_RELEASE_RESET();

  __HAL_RCC_AHB_FORCE_RESET();

  __HAL_RCC_AHB_RELEASE_RESET();

  /* De-Init the low level hardware */

  HAL_MspDeInit();

  /* Return function status */

  return HAL_OK;

}

/**

  * @brief  Initialize the MSP.

  * @retval None

  */

__weak void HAL_MspInit(void)

{

  /* NOTE : This function should not be modified, when the callback is needed,

            the HAL_MspInit could be implemented in the user file

   */

}

/**

  * @brief  DeInitializes the MSP.

  * @retval None

  */

__weak void HAL_MspDeInit(void)

{

  /* NOTE : This function should not be modified, when the callback is needed,

            the HAL_MspDeInit could be implemented in the user file

   */

}

/**

  * @brief This function configures the source of the time base.

  *        The time source is configured  to have 1ms time base with a dedicated

  *        Tick interrupt priority.

  * @note This function is called  automatically at the beginning of program after

  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig().

  * @note In the default implementation, SysTick timer is the source of time base.

  *       It is used to generate interrupts at regular time intervals.

  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process,

  *       The SysTick interrupt must have higher priority (numerically lower)

  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.

  *       The function is declared as __Weak  to be overwritten  in case of other

  *       implementation  in user file.

  * @param TickPriority Tick interrupt priority.

  * @retval HAL status

  */

__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)

{

  /*Configure the SysTick to have interrupt in 1ms time basis*/

  if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)

  {

    return HAL_ERROR;

  }

  /* Configure the SysTick IRQ priority */

  if (TickPriority < (1UL << __NVIC_PRIO_BITS))

  {

    HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);

    uwTickPrio = TickPriority;

  }

  else

  {

    return HAL_ERROR;

  }

   /* Return function status */

  return HAL_OK;

}

/**

  * @}

  */

/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions

  * @brief    HAL Control functions

  *

@verbatim

 ===============================================================================

                      ##### HAL Control functions #####

 ===============================================================================

    [..]  This section provides functions allowing to:

      (+) Provide a tick value in millisecond

      (+) Provide a blocking delay in millisecond

      (+) Suspend the time base source interrupt

      (+) Resume the time base source interrupt

      (+) Get the HAL API driver version

      (+) Get the device identifier

      (+) Get the device revision identifier

      (+) Enable/Disable Debug module during Sleep mode

      (+) Enable/Disable Debug module during STOP mode

      (+) Enable/Disable Debug module during STANDBY mode

@endverbatim

  * @{

  */

/**

  * @brief This function is called to increment  a global variable "uwTick"

  *        used as application time base.

  * @note In the default implementation, this variable is incremented each 1ms

  *       in SysTick ISR.

  * @note This function is declared as __weak to be overwritten in case of other

  *       implementations in user file.

  * @retval None

  */

__weak void HAL_IncTick(void)

{

  uwTick += uwTickFreq;

}

/**

  * @brief  Provides a tick value in millisecond.

  * @note   This function is declared as __weak  to be overwritten  in case of other

  *       implementations in user file.

  * @retval tick value

  */

__weak uint32_t HAL_GetTick(void)

{

  return uwTick;

}

/**

  * @brief This function returns a tick priority.

  * @retval tick priority

  */

uint32_t HAL_GetTickPrio(void)

{

  return uwTickPrio;

}

/**

  * @brief Set new tick Freq.

  * @retval status

  */

HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)

{

  HAL_StatusTypeDef status  = HAL_OK;

  HAL_TickFreqTypeDef prevTickFreq;

  assert_param(IS_TICKFREQ(Freq));

  if (uwTickFreq != Freq)

  {

    /* Back up uwTickFreq frequency */

    prevTickFreq = uwTickFreq;

    /* Update uwTickFreq global variable used by HAL_InitTick() */

    uwTickFreq = Freq;

    /* Apply the new tick Freq */

    status = HAL_InitTick(uwTickPrio);

    if (status != HAL_OK)

    {

      /* Restore previous tick frequency */

      uwTickFreq = prevTickFreq;

    }

  }

  return status;

}

/**

  * @brief return tick frequency.

  * @retval tick period in Hz

  */

HAL_TickFreqTypeDef HAL_GetTickFreq(void)

{

  return uwTickFreq;

}

/**

  * @brief This function provides accurate delay (in milliseconds) based

  *        on variable incremented.

  * @note In the default implementation , SysTick timer is the source of time base.

  *       It is used to generate interrupts at regular time intervals where uwTick

  *       is incremented.

  * @note ThiS function is declared as __weak to be overwritten in case of other

  *       implementations in user file.

  * @param Delay specifies the delay time length, in milliseconds.

  * @retval None

  */

__weak void HAL_Delay(uint32_t Delay)

{

  uint32_t tickstart = HAL_GetTick();

  uint32_t wait = Delay;

  /* Add a freq to guarantee minimum wait */

  if (wait < HAL_MAX_DELAY)

  {

    wait += (uint32_t)(uwTickFreq);

  }

  while((HAL_GetTick() - tickstart) < wait)

  {

  }

}

/**

  * @brief Suspend Tick increment.

  * @note In the default implementation , SysTick timer is the source of time base. It is

  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()

  *       is called, the the SysTick interrupt will be disabled and so Tick increment

  *       is suspended.

  * @note This function is declared as __weak to be overwritten in case of other

  *       implementations in user file.

  * @retval None

  */

__weak void HAL_SuspendTick(void)

{

  /* Disable SysTick Interrupt */

  CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);

}

/**

  * @brief Resume Tick increment.

  * @note In the default implementation , SysTick timer is the source of time base. It is

  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()

  *       is called, the the SysTick interrupt will be enabled and so Tick increment

  *       is resumed.

  * @note This function is declared as __weak  to be overwritten  in case of other

  *       implementations in user file.

  * @retval None

  */

__weak void HAL_ResumeTick(void)

{

  /* Enable SysTick Interrupt */

  SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);

}

/**

  * @brief  This method returns the HAL revision

  * @retval version 0xXYZR (8bits for each decimal, R for RC)

  */

uint32_t HAL_GetHalVersion(void)

{

 return __STM32F0xx_HAL_VERSION;

}

/**

  * @brief  Returns the device revision identifier.

  * @retval Device revision identifier

  */

uint32_t HAL_GetREVID(void)

{

   return((DBGMCU->IDCODE) >> 16U);

}

/**

  * @brief  Returns the device identifier.

  * @retval Device identifier

  */

uint32_t HAL_GetDEVID(void)

{

   return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);

}

/**

  * @brief  Returns first word of the unique device identifier (UID based on 96 bits)

  * @retval Device identifier

  */

uint32_t HAL_GetUIDw0(void)

{

   return(READ_REG(*((uint32_t *)UID_BASE)));

}

/**

  * @brief  Returns second word of the unique device identifier (UID based on 96 bits)

  * @retval Device identifier

  */

uint32_t HAL_GetUIDw1(void)

{

   return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));

}

/**

  * @brief  Returns third word of the unique device identifier (UID based on 96 bits)

  * @retval Device identifier

  */

uint32_t HAL_GetUIDw2(void)

{

   return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));

}

/**

  * @brief  Enable the Debug Module during STOP mode

  * @retval None

  */

void HAL_DBGMCU_EnableDBGStopMode(void)

{

  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);

}

/**

  * @brief  Disable the Debug Module during STOP mode

  * @retval None

  */

void HAL_DBGMCU_DisableDBGStopMode(void)

{

  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);

}

/**

  * @brief  Enable the Debug Module during STANDBY mode

  * @retval None

  */

void HAL_DBGMCU_EnableDBGStandbyMode(void)

{

  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);

}

/**

  * @brief  Disable the Debug Module during STANDBY mode

  * @retval None

  */

void HAL_DBGMCU_DisableDBGStandbyMode(void)

{

  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);

}

/**

  * @}

  */

/**

  * @}

  */

#endif /* HAL_MODULE_ENABLED */

/**

  * @}

  */

/**

  * @}

  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/