Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 2 | mjames | 1 | /** |
| 2 | ****************************************************************************** |
||
| 3 | * @file stm32f0xx_hal_smartcard.h |
||
| 4 | * @author MCD Application Team |
||
| 5 | * @brief Header file of SMARTCARD HAL module. |
||
| 6 | ****************************************************************************** |
||
| 7 | * @attention |
||
| 8 | * |
||
| 9 | * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
||
| 10 | * All rights reserved.</center></h2> |
||
| 11 | * |
||
| 12 | * This software component is licensed by ST under BSD 3-Clause license, |
||
| 13 | * the "License"; You may not use this file except in compliance with the |
||
| 14 | * License. You may obtain a copy of the License at: |
||
| 15 | * opensource.org/licenses/BSD-3-Clause |
||
| 16 | * |
||
| 17 | ****************************************************************************** |
||
| 18 | */ |
||
| 19 | |||
| 20 | /* Define to prevent recursive inclusion -------------------------------------*/ |
||
| 21 | #ifndef STM32F0xx_HAL_SMARTCARD_H |
||
| 22 | #define STM32F0xx_HAL_SMARTCARD_H |
||
| 23 | |||
| 24 | #ifdef __cplusplus |
||
| 25 | extern "C" { |
||
| 26 | #endif |
||
| 27 | #if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) |
||
| 28 | /* Includes ------------------------------------------------------------------*/ |
||
| 29 | #include "stm32f0xx_hal_def.h" |
||
| 30 | |||
| 31 | /** @addtogroup STM32F0xx_HAL_Driver |
||
| 32 | * @{ |
||
| 33 | */ |
||
| 34 | |||
| 35 | /** @addtogroup SMARTCARD |
||
| 36 | * @{ |
||
| 37 | */ |
||
| 38 | |||
| 39 | /* Exported types ------------------------------------------------------------*/ |
||
| 40 | /** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types |
||
| 41 | * @{ |
||
| 42 | */ |
||
| 43 | |||
| 44 | /** |
||
| 45 | * @brief SMARTCARD Init Structure definition |
||
| 46 | */ |
||
| 47 | typedef struct |
||
| 48 | { |
||
| 49 | uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. |
||
| 50 | The baud rate register is computed using the following formula: |
||
| 51 | Baud Rate Register = ((usart_ker_ckpres) / ((hsmartcard->Init.BaudRate))) |
||
| 52 | where usart_ker_ckpres is the USART input clock divided by a prescaler */ |
||
| 53 | |||
| 54 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
||
| 55 | This parameter @ref SMARTCARD_Word_Length can only be |
||
| 56 | set to 9 (8 data + 1 parity bits). */ |
||
| 57 | |||
| 58 | uint32_t StopBits; /*!< Specifies the number of stop bits. |
||
| 59 | This parameter can be a value of @ref SMARTCARD_Stop_Bits. */ |
||
| 60 | |||
| 61 | uint16_t Parity; /*!< Specifies the parity mode. |
||
| 62 | This parameter can be a value of @ref SMARTCARD_Parity |
||
| 63 | @note The parity is enabled by default (PCE is forced to 1). |
||
| 64 | Since the WordLength is forced to 8 bits + parity, M is |
||
| 65 | forced to 1 and the parity bit is the 9th bit. */ |
||
| 66 | |||
| 67 | uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. |
||
| 68 | This parameter can be a value of @ref SMARTCARD_Mode */ |
||
| 69 | |||
| 70 | uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock. |
||
| 71 | This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ |
||
| 72 | |||
| 73 | uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. |
||
| 74 | This parameter can be a value of @ref SMARTCARD_Clock_Phase */ |
||
| 75 | |||
| 76 | uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted |
||
| 77 | data bit (MSB) has to be output on the SCLK pin in synchronous mode. |
||
| 78 | This parameter can be a value of @ref SMARTCARD_Last_Bit */ |
||
| 79 | |||
| 80 | uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote |
||
| 81 | is selected. Selecting the single sample method increases |
||
| 82 | the receiver tolerance to clock deviations. This parameter can be a value |
||
| 83 | of @ref SMARTCARD_OneBit_Sampling. */ |
||
| 84 | |||
| 85 | uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. |
||
| 86 | This parameter can be any value from 0x01 to 0x1F. Prescaler value is |
||
| 87 | multiplied by 2 to give the division factor of the source clock frequency */ |
||
| 88 | |||
| 89 | uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */ |
||
| 90 | |||
| 91 | uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled |
||
| 92 | in case of parity error. |
||
| 93 | This parameter can be a value of @ref SMARTCARD_NACK_Enable */ |
||
| 94 | |||
| 95 | uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. |
||
| 96 | This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ |
||
| 97 | |||
| 98 | uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: |
||
| 99 | it is used to implement the Character Wait Time (CWT) and |
||
| 100 | Block Wait Time (BWT). It is coded over 24 bits. */ |
||
| 101 | |||
| 102 | uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. |
||
| 103 | This parameter can be any value from 0x0 to 0xFF */ |
||
| 104 | |||
| 105 | uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in |
||
| 106 | receive and transmit mode). When set to 0, retransmission is |
||
| 107 | disabled. Otherwise, its maximum value is 7 (before signalling |
||
| 108 | an error) */ |
||
| 109 | |||
| 110 | } SMARTCARD_InitTypeDef; |
||
| 111 | |||
| 112 | /** |
||
| 113 | * @brief SMARTCARD advanced features initialization structure definition |
||
| 114 | */ |
||
| 115 | typedef struct |
||
| 116 | { |
||
| 117 | uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several |
||
| 118 | advanced features may be initialized at the same time. This parameter |
||
| 119 | can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */ |
||
| 120 | |||
| 121 | uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. |
||
| 122 | This parameter can be a value of @ref SMARTCARD_Tx_Inv */ |
||
| 123 | |||
| 124 | uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. |
||
| 125 | This parameter can be a value of @ref SMARTCARD_Rx_Inv */ |
||
| 126 | |||
| 127 | uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic |
||
| 128 | vs negative/inverted logic). |
||
| 129 | This parameter can be a value of @ref SMARTCARD_Data_Inv */ |
||
| 130 | |||
| 131 | uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. |
||
| 132 | This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ |
||
| 133 | |||
| 134 | uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. |
||
| 135 | This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ |
||
| 136 | |||
| 137 | uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. |
||
| 138 | This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ |
||
| 139 | |||
| 140 | uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. |
||
| 141 | This parameter can be a value of @ref SMARTCARD_MSB_First */ |
||
| 142 | |||
| 143 | uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when |
||
| 144 | relevant flag is available) or once guard time period has elapsed. |
||
| 145 | This parameter can be a value |
||
| 146 | of @ref SMARTCARDEx_Transmission_Completion_Indication. */ |
||
| 147 | } SMARTCARD_AdvFeatureInitTypeDef; |
||
| 148 | |||
| 149 | /** |
||
| 150 | * @brief HAL SMARTCARD State definition |
||
| 151 | * @note HAL SMARTCARD State value is a combination of 2 different substates: |
||
| 152 | * gState and RxState (see @ref SMARTCARD_State_Definition). |
||
| 153 | * - gState contains SMARTCARD state information related to global Handle management |
||
| 154 | * and also information related to Tx operations. |
||
| 155 | * gState value coding follow below described bitmap : |
||
| 156 | * b7-b6 Error information |
||
| 157 | * 00 : No Error |
||
| 158 | * 01 : (Not Used) |
||
| 159 | * 10 : Timeout |
||
| 160 | * 11 : Error |
||
| 161 | * b5 Peripheral initialization status |
||
| 162 | * 0 : Reset (Peripheral not initialized) |
||
| 163 | * 1 : Init done (Peripheral initialized. HAL SMARTCARD Init function already called) |
||
| 164 | * b4-b3 (not used) |
||
| 165 | * xx : Should be set to 00 |
||
| 166 | * b2 Intrinsic process state |
||
| 167 | * 0 : Ready |
||
| 168 | * 1 : Busy (Peripheral busy with some configuration or internal operations) |
||
| 169 | * b1 (not used) |
||
| 170 | * x : Should be set to 0 |
||
| 171 | * b0 Tx state |
||
| 172 | * 0 : Ready (no Tx operation ongoing) |
||
| 173 | * 1 : Busy (Tx operation ongoing) |
||
| 174 | * - RxState contains information related to Rx operations. |
||
| 175 | * RxState value coding follow below described bitmap : |
||
| 176 | * b7-b6 (not used) |
||
| 177 | * xx : Should be set to 00 |
||
| 178 | * b5 Peripheral initialization status |
||
| 179 | * 0 : Reset (Peripheral not initialized) |
||
| 180 | * 1 : Init done (Peripheral initialized) |
||
| 181 | * b4-b2 (not used) |
||
| 182 | * xxx : Should be set to 000 |
||
| 183 | * b1 Rx state |
||
| 184 | * 0 : Ready (no Rx operation ongoing) |
||
| 185 | * 1 : Busy (Rx operation ongoing) |
||
| 186 | * b0 (not used) |
||
| 187 | * x : Should be set to 0. |
||
| 188 | */ |
||
| 189 | typedef uint32_t HAL_SMARTCARD_StateTypeDef; |
||
| 190 | |||
| 191 | /** |
||
| 192 | * @brief SMARTCARD handle Structure definition |
||
| 193 | */ |
||
| 194 | typedef struct __SMARTCARD_HandleTypeDef |
||
| 195 | { |
||
| 196 | USART_TypeDef *Instance; /*!< USART registers base address */ |
||
| 197 | |||
| 198 | SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ |
||
| 199 | |||
| 200 | SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */ |
||
| 201 | |||
| 202 | uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ |
||
| 203 | |||
| 204 | uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ |
||
| 205 | |||
| 206 | __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ |
||
| 207 | |||
| 208 | uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ |
||
| 209 | |||
| 210 | uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ |
||
| 211 | |||
| 212 | __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ |
||
| 213 | |||
| 214 | |||
| 215 | void (*RxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ |
||
| 216 | |||
| 217 | void (*TxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ |
||
| 218 | |||
| 219 | DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ |
||
| 220 | |||
| 221 | DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ |
||
| 222 | |||
| 223 | HAL_LockTypeDef Lock; /*!< Locking object */ |
||
| 224 | |||
| 225 | __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global |
||
| 226 | Handle management and also related to Tx operations. |
||
| 227 | This parameter can be a value |
||
| 228 | of @ref HAL_SMARTCARD_StateTypeDef */ |
||
| 229 | |||
| 230 | __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. |
||
| 231 | This parameter can be a value |
||
| 232 | of @ref HAL_SMARTCARD_StateTypeDef */ |
||
| 233 | |||
| 234 | __IO uint32_t ErrorCode; /*!< SmartCard Error code */ |
||
| 235 | |||
| 236 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
||
| 237 | void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Complete Callback */ |
||
| 238 | |||
| 239 | void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Complete Callback */ |
||
| 240 | |||
| 241 | void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Error Callback */ |
||
| 242 | |||
| 243 | void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Complete Callback */ |
||
| 244 | |||
| 245 | void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Transmit Complete Callback */ |
||
| 246 | |||
| 247 | void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Receive Complete Callback */ |
||
| 248 | |||
| 249 | void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp Init callback */ |
||
| 250 | |||
| 251 | void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp DeInit callback */ |
||
| 252 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
||
| 253 | |||
| 254 | } SMARTCARD_HandleTypeDef; |
||
| 255 | |||
| 256 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
||
| 257 | /** |
||
| 258 | * @brief HAL SMARTCARD Callback ID enumeration definition |
||
| 259 | */ |
||
| 260 | typedef enum |
||
| 261 | { |
||
| 262 | HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ |
||
| 263 | HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ |
||
| 264 | HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ |
||
| 265 | HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ |
||
| 266 | HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ |
||
| 267 | HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ |
||
| 268 | |||
| 269 | HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ |
||
| 270 | HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ |
||
| 271 | |||
| 272 | } HAL_SMARTCARD_CallbackIDTypeDef; |
||
| 273 | |||
| 274 | /** |
||
| 275 | * @brief HAL SMARTCARD Callback pointer definition |
||
| 276 | */ |
||
| 277 | typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsmartcard); /*!< pointer to an SMARTCARD callback function */ |
||
| 278 | |||
| 279 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
||
| 280 | |||
| 281 | /** |
||
| 282 | * @brief SMARTCARD clock sources |
||
| 283 | */ |
||
| 284 | typedef enum |
||
| 285 | { |
||
| 286 | SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ |
||
| 287 | SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ |
||
| 288 | SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ |
||
| 289 | SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ |
||
| 290 | SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */ |
||
| 291 | } SMARTCARD_ClockSourceTypeDef; |
||
| 292 | |||
| 293 | /** |
||
| 294 | * @} |
||
| 295 | */ |
||
| 296 | |||
| 297 | /* Exported constants --------------------------------------------------------*/ |
||
| 298 | /** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants |
||
| 299 | * @{ |
||
| 300 | */ |
||
| 301 | |||
| 302 | /** @defgroup SMARTCARD_State_Definition SMARTCARD State Code Definition |
||
| 303 | * @{ |
||
| 304 | */ |
||
| 305 | #define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized. Value |
||
| 306 | is allowed for gState and RxState */ |
||
| 307 | #define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for |
||
| 308 | use. Value is allowed for gState |
||
| 309 | and RxState */ |
||
| 310 | #define HAL_SMARTCARD_STATE_BUSY 0x00000024U /*!< an internal process is ongoing |
||
| 311 | Value is allowed for gState only */ |
||
| 312 | #define HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing |
||
| 313 | Value is allowed for gState only */ |
||
| 314 | #define HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing |
||
| 315 | Value is allowed for RxState only */ |
||
| 316 | #define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception |
||
| 317 | process is ongoing Not to be used for |
||
| 318 | neither gState nor RxState. |
||
| 319 | Value is result of combination (Or) |
||
| 320 | between gState and RxState values */ |
||
| 321 | #define HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U /*!< Timeout state |
||
| 322 | Value is allowed for gState only */ |
||
| 323 | #define HAL_SMARTCARD_STATE_ERROR 0x000000E0U /*!< Error |
||
| 324 | Value is allowed for gState only */ |
||
| 325 | /** |
||
| 326 | * @} |
||
| 327 | */ |
||
| 328 | |||
| 329 | /** @defgroup SMARTCARD_Error_Definition SMARTCARD Error Code Definition |
||
| 330 | * @{ |
||
| 331 | */ |
||
| 332 | #define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /*!< No error */ |
||
| 333 | #define HAL_SMARTCARD_ERROR_PE (0x00000001U) /*!< Parity error */ |
||
| 334 | #define HAL_SMARTCARD_ERROR_NE (0x00000002U) /*!< Noise error */ |
||
| 335 | #define HAL_SMARTCARD_ERROR_FE (0x00000004U) /*!< frame error */ |
||
| 336 | #define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /*!< Overrun error */ |
||
| 337 | #define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ |
||
| 338 | #define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /*!< Receiver TimeOut error */ |
||
| 339 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
||
| 340 | #define HAL_SMARTCARD_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ |
||
| 341 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
||
| 342 | /** |
||
| 343 | * @} |
||
| 344 | */ |
||
| 345 | |||
| 346 | /** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length |
||
| 347 | * @{ |
||
| 348 | */ |
||
| 349 | #if defined(USART_CR1_M0) |
||
| 350 | #define SMARTCARD_WORDLENGTH_9B USART_CR1_M0 /*!< SMARTCARD frame length */ |
||
| 351 | #else |
||
| 352 | #define SMARTCARD_WORDLENGTH_9B USART_CR1_M /*!< SMARTCARD frame length */ |
||
| 353 | #endif /* USART_CR1_M0 */ |
||
| 354 | /** |
||
| 355 | * @} |
||
| 356 | */ |
||
| 357 | |||
| 358 | /** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits |
||
| 359 | * @{ |
||
| 360 | */ |
||
| 361 | #define SMARTCARD_STOPBITS_0_5 USART_CR2_STOP_0 /*!< SMARTCARD frame with 0.5 stop bit */ |
||
| 362 | #define SMARTCARD_STOPBITS_1_5 USART_CR2_STOP /*!< SMARTCARD frame with 1.5 stop bits */ |
||
| 363 | /** |
||
| 364 | * @} |
||
| 365 | */ |
||
| 366 | |||
| 367 | /** @defgroup SMARTCARD_Parity SMARTCARD Parity |
||
| 368 | * @{ |
||
| 369 | */ |
||
| 370 | #define SMARTCARD_PARITY_EVEN USART_CR1_PCE /*!< SMARTCARD frame even parity */ |
||
| 371 | #define SMARTCARD_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< SMARTCARD frame odd parity */ |
||
| 372 | /** |
||
| 373 | * @} |
||
| 374 | */ |
||
| 375 | |||
| 376 | /** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode |
||
| 377 | * @{ |
||
| 378 | */ |
||
| 379 | #define SMARTCARD_MODE_RX USART_CR1_RE /*!< SMARTCARD RX mode */ |
||
| 380 | #define SMARTCARD_MODE_TX USART_CR1_TE /*!< SMARTCARD TX mode */ |
||
| 381 | #define SMARTCARD_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< SMARTCARD RX and TX mode */ |
||
| 382 | /** |
||
| 383 | * @} |
||
| 384 | */ |
||
| 385 | |||
| 386 | /** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity |
||
| 387 | * @{ |
||
| 388 | */ |
||
| 389 | #define SMARTCARD_POLARITY_LOW 0x00000000U /*!< SMARTCARD frame low polarity */ |
||
| 390 | #define SMARTCARD_POLARITY_HIGH USART_CR2_CPOL /*!< SMARTCARD frame high polarity */ |
||
| 391 | /** |
||
| 392 | * @} |
||
| 393 | */ |
||
| 394 | |||
| 395 | /** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase |
||
| 396 | * @{ |
||
| 397 | */ |
||
| 398 | #define SMARTCARD_PHASE_1EDGE 0x00000000U /*!< SMARTCARD frame phase on first clock transition */ |
||
| 399 | #define SMARTCARD_PHASE_2EDGE USART_CR2_CPHA /*!< SMARTCARD frame phase on second clock transition */ |
||
| 400 | /** |
||
| 401 | * @} |
||
| 402 | */ |
||
| 403 | |||
| 404 | /** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit |
||
| 405 | * @{ |
||
| 406 | */ |
||
| 407 | #define SMARTCARD_LASTBIT_DISABLE 0x00000000U /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */ |
||
| 408 | #define SMARTCARD_LASTBIT_ENABLE USART_CR2_LBCL /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */ |
||
| 409 | /** |
||
| 410 | * @} |
||
| 411 | */ |
||
| 412 | |||
| 413 | /** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method |
||
| 414 | * @{ |
||
| 415 | */ |
||
| 416 | #define SMARTCARD_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< SMARTCARD frame one-bit sample disabled */ |
||
| 417 | #define SMARTCARD_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< SMARTCARD frame one-bit sample enabled */ |
||
| 418 | /** |
||
| 419 | * @} |
||
| 420 | */ |
||
| 421 | |||
| 422 | /** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable |
||
| 423 | * @{ |
||
| 424 | */ |
||
| 425 | #define SMARTCARD_NACK_DISABLE 0x00000000U /*!< SMARTCARD NACK transmission disabled */ |
||
| 426 | #define SMARTCARD_NACK_ENABLE USART_CR3_NACK /*!< SMARTCARD NACK transmission enabled */ |
||
| 427 | /** |
||
| 428 | * @} |
||
| 429 | */ |
||
| 430 | |||
| 431 | /** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable |
||
| 432 | * @{ |
||
| 433 | */ |
||
| 434 | #define SMARTCARD_TIMEOUT_DISABLE 0x00000000U /*!< SMARTCARD receiver timeout disabled */ |
||
| 435 | #define SMARTCARD_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< SMARTCARD receiver timeout enabled */ |
||
| 436 | /** |
||
| 437 | * @} |
||
| 438 | */ |
||
| 439 | |||
| 440 | /** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion |
||
| 441 | * @{ |
||
| 442 | */ |
||
| 443 | #define SMARTCARD_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ |
||
| 444 | #define SMARTCARD_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ |
||
| 445 | /** |
||
| 446 | * @} |
||
| 447 | */ |
||
| 448 | |||
| 449 | /** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion |
||
| 450 | * @{ |
||
| 451 | */ |
||
| 452 | #define SMARTCARD_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ |
||
| 453 | #define SMARTCARD_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ |
||
| 454 | /** |
||
| 455 | * @} |
||
| 456 | */ |
||
| 457 | |||
| 458 | /** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion |
||
| 459 | * @{ |
||
| 460 | */ |
||
| 461 | #define SMARTCARD_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ |
||
| 462 | #define SMARTCARD_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ |
||
| 463 | /** |
||
| 464 | * @} |
||
| 465 | */ |
||
| 466 | |||
| 467 | /** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap |
||
| 468 | * @{ |
||
| 469 | */ |
||
| 470 | #define SMARTCARD_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ |
||
| 471 | #define SMARTCARD_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ |
||
| 472 | /** |
||
| 473 | * @} |
||
| 474 | */ |
||
| 475 | |||
| 476 | /** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable |
||
| 477 | * @{ |
||
| 478 | */ |
||
| 479 | #define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ |
||
| 480 | #define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ |
||
| 481 | /** |
||
| 482 | * @} |
||
| 483 | */ |
||
| 484 | |||
| 485 | /** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error |
||
| 486 | * @{ |
||
| 487 | */ |
||
| 488 | #define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ |
||
| 489 | #define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ |
||
| 490 | /** |
||
| 491 | * @} |
||
| 492 | */ |
||
| 493 | |||
| 494 | /** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first |
||
| 495 | * @{ |
||
| 496 | */ |
||
| 497 | #define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */ |
||
| 498 | #define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */ |
||
| 499 | /** |
||
| 500 | * @} |
||
| 501 | */ |
||
| 502 | |||
| 503 | /** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters |
||
| 504 | * @{ |
||
| 505 | */ |
||
| 506 | #define SMARTCARD_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive data flush request */ |
||
| 507 | #define SMARTCARD_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush request */ |
||
| 508 | /** |
||
| 509 | * @} |
||
| 510 | */ |
||
| 511 | |||
| 512 | /** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask |
||
| 513 | * @{ |
||
| 514 | */ |
||
| 515 | #define SMARTCARD_IT_MASK 0x001FU /*!< SMARTCARD interruptions flags mask */ |
||
| 516 | #define SMARTCARD_CR_MASK 0x00E0U /*!< SMARTCARD control register mask */ |
||
| 517 | #define SMARTCARD_CR_POS 5U /*!< SMARTCARD control register position */ |
||
| 518 | #define SMARTCARD_ISR_MASK 0x1F00U /*!< SMARTCARD ISR register mask */ |
||
| 519 | #define SMARTCARD_ISR_POS 8U /*!< SMARTCARD ISR register position */ |
||
| 520 | /** |
||
| 521 | * @} |
||
| 522 | */ |
||
| 523 | |||
| 524 | /** |
||
| 525 | * @} |
||
| 526 | */ |
||
| 527 | |||
| 528 | /* Exported macros -----------------------------------------------------------*/ |
||
| 529 | /** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros |
||
| 530 | * @{ |
||
| 531 | */ |
||
| 532 | |||
| 533 | /** @brief Reset SMARTCARD handle states. |
||
| 534 | * @param __HANDLE__ SMARTCARD handle. |
||
| 535 | * @retval None |
||
| 536 | */ |
||
| 537 | #if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 |
||
| 538 | #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
||
| 539 | (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ |
||
| 540 | (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ |
||
| 541 | (__HANDLE__)->MspInitCallback = NULL; \ |
||
| 542 | (__HANDLE__)->MspDeInitCallback = NULL; \ |
||
| 543 | } while(0U) |
||
| 544 | #else |
||
| 545 | #define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
||
| 546 | (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ |
||
| 547 | (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ |
||
| 548 | } while(0U) |
||
| 549 | #endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
||
| 550 | |||
| 551 | /** @brief Flush the Smartcard Data registers. |
||
| 552 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 553 | * @retval None |
||
| 554 | */ |
||
| 555 | #define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \ |
||
| 556 | do{ \ |
||
| 557 | SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \ |
||
| 558 | SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \ |
||
| 559 | } while(0U) |
||
| 560 | |||
| 561 | /** @brief Clear the specified SMARTCARD pending flag. |
||
| 562 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 563 | * @param __FLAG__ specifies the flag to check. |
||
| 564 | * This parameter can be any combination of the following values: |
||
| 565 | * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag |
||
| 566 | * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag |
||
| 567 | * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag |
||
| 568 | * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag |
||
| 569 | * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag |
||
| 570 | * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag |
||
| 571 | * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag |
||
| 572 | * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag |
||
| 573 | * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag |
||
| 574 | * @retval None |
||
| 575 | */ |
||
| 576 | #define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) |
||
| 577 | |||
| 578 | /** @brief Clear the SMARTCARD PE pending flag. |
||
| 579 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 580 | * @retval None |
||
| 581 | */ |
||
| 582 | #define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF) |
||
| 583 | |||
| 584 | /** @brief Clear the SMARTCARD FE pending flag. |
||
| 585 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 586 | * @retval None |
||
| 587 | */ |
||
| 588 | #define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF) |
||
| 589 | |||
| 590 | /** @brief Clear the SMARTCARD NE pending flag. |
||
| 591 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 592 | * @retval None |
||
| 593 | */ |
||
| 594 | #define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF) |
||
| 595 | |||
| 596 | /** @brief Clear the SMARTCARD ORE pending flag. |
||
| 597 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 598 | * @retval None |
||
| 599 | */ |
||
| 600 | #define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF) |
||
| 601 | |||
| 602 | /** @brief Clear the SMARTCARD IDLE pending flag. |
||
| 603 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 604 | * @retval None |
||
| 605 | */ |
||
| 606 | #define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF) |
||
| 607 | |||
| 608 | /** @brief Check whether the specified Smartcard flag is set or not. |
||
| 609 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 610 | * @param __FLAG__ specifies the flag to check. |
||
| 611 | * This parameter can be one of the following values: |
||
| 612 | * @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available) |
||
| 613 | * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag |
||
| 614 | * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag |
||
| 615 | * @arg @ref SMARTCARD_FLAG_BUSY Busy flag |
||
| 616 | * @arg @ref SMARTCARD_FLAG_EOBF End of block flag |
||
| 617 | * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag |
||
| 618 | * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag |
||
| 619 | * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag |
||
| 620 | * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag |
||
| 621 | * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag |
||
| 622 | * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag |
||
| 623 | * @arg @ref SMARTCARD_FLAG_NE Noise error flag |
||
| 624 | * @arg @ref SMARTCARD_FLAG_FE Framing error flag |
||
| 625 | * @arg @ref SMARTCARD_FLAG_PE Parity error flag |
||
| 626 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
||
| 627 | */ |
||
| 628 | #define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) |
||
| 629 | |||
| 630 | /** @brief Enable the specified SmartCard interrupt. |
||
| 631 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 632 | * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. |
||
| 633 | * This parameter can be one of the following values: |
||
| 634 | * @arg @ref SMARTCARD_IT_EOB End of block interrupt |
||
| 635 | * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt |
||
| 636 | * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt |
||
| 637 | * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt |
||
| 638 | * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before |
||
| 639 | * guard time interrupt (when interruption available) |
||
| 640 | * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt |
||
| 641 | * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt |
||
| 642 | * @arg @ref SMARTCARD_IT_PE Parity error interrupt |
||
| 643 | * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) |
||
| 644 | * @retval None |
||
| 645 | */ |
||
| 646 | #define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ |
||
| 647 | SMARTCARD_CR_POS) == 1U)?\ |
||
| 648 | ((__HANDLE__)->Instance->CR1 |= (1UL <<\ |
||
| 649 | ((__INTERRUPT__) & SMARTCARD_IT_MASK))):\ |
||
| 650 | ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ |
||
| 651 | SMARTCARD_CR_POS) == 2U)?\ |
||
| 652 | ((__HANDLE__)->Instance->CR2 |= (1UL <<\ |
||
| 653 | ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ |
||
| 654 | ((__HANDLE__)->Instance->CR3 |= (1UL <<\ |
||
| 655 | ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) |
||
| 656 | |||
| 657 | /** @brief Disable the specified SmartCard interrupt. |
||
| 658 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 659 | * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. |
||
| 660 | * This parameter can be one of the following values: |
||
| 661 | * @arg @ref SMARTCARD_IT_EOB End of block interrupt |
||
| 662 | * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt |
||
| 663 | * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt |
||
| 664 | * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt |
||
| 665 | * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard |
||
| 666 | * time interrupt (when interruption available) |
||
| 667 | * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt |
||
| 668 | * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt |
||
| 669 | * @arg @ref SMARTCARD_IT_PE Parity error interrupt |
||
| 670 | * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) |
||
| 671 | * @retval None |
||
| 672 | */ |
||
| 673 | #define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ |
||
| 674 | SMARTCARD_CR_POS) == 1U)?\ |
||
| 675 | ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ |
||
| 676 | ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ |
||
| 677 | ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ |
||
| 678 | SMARTCARD_CR_POS) == 2U)?\ |
||
| 679 | ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ |
||
| 680 | ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ |
||
| 681 | ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ |
||
| 682 | ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) |
||
| 683 | |||
| 684 | /** @brief Check whether the specified SmartCard interrupt has occurred or not. |
||
| 685 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 686 | * @param __INTERRUPT__ specifies the SMARTCARD interrupt to check. |
||
| 687 | * This parameter can be one of the following values: |
||
| 688 | * @arg @ref SMARTCARD_IT_EOB End of block interrupt |
||
| 689 | * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt |
||
| 690 | * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt |
||
| 691 | * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt |
||
| 692 | * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time |
||
| 693 | * interrupt (when interruption available) |
||
| 694 | * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt |
||
| 695 | * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt |
||
| 696 | * @arg @ref SMARTCARD_IT_PE Parity error interrupt |
||
| 697 | * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) |
||
| 698 | * @retval The new state of __INTERRUPT__ (SET or RESET). |
||
| 699 | */ |
||
| 700 | #define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) (\ |
||
| 701 | (((__HANDLE__)->Instance->ISR & (0x01UL << (((__INTERRUPT__)\ |
||
| 702 | & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS)))!= 0U)\ |
||
| 703 | ? SET : RESET) |
||
| 704 | |||
| 705 | /** @brief Check whether the specified SmartCard interrupt source is enabled or not. |
||
| 706 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 707 | * @param __INTERRUPT__ specifies the SMARTCARD interrupt source to check. |
||
| 708 | * This parameter can be one of the following values: |
||
| 709 | * @arg @ref SMARTCARD_IT_EOB End of block interrupt |
||
| 710 | * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt |
||
| 711 | * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt |
||
| 712 | * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt |
||
| 713 | * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time |
||
| 714 | * interrupt (when interruption available) |
||
| 715 | * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt |
||
| 716 | * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt |
||
| 717 | * @arg @ref SMARTCARD_IT_PE Parity error interrupt |
||
| 718 | * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) |
||
| 719 | * @retval The new state of __INTERRUPT__ (SET or RESET). |
||
| 720 | */ |
||
| 721 | #define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ |
||
| 722 | SMARTCARD_CR_POS) == 0x01U)?\ |
||
| 723 | (__HANDLE__)->Instance->CR1 : \ |
||
| 724 | (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ |
||
| 725 | SMARTCARD_CR_POS) == 0x02U)?\ |
||
| 726 | (__HANDLE__)->Instance->CR2 : \ |
||
| 727 | (__HANDLE__)->Instance->CR3)) &\ |
||
| 728 | (0x01UL << (((uint16_t)(__INTERRUPT__))\ |
||
| 729 | & SMARTCARD_IT_MASK))) != 0U)\ |
||
| 730 | ? SET : RESET) |
||
| 731 | |||
| 732 | /** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag. |
||
| 733 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 734 | * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set |
||
| 735 | * to clear the corresponding interrupt. |
||
| 736 | * This parameter can be one of the following values: |
||
| 737 | * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag |
||
| 738 | * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag |
||
| 739 | * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag |
||
| 740 | * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag |
||
| 741 | * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag |
||
| 742 | * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag |
||
| 743 | * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available) |
||
| 744 | * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag |
||
| 745 | * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag |
||
| 746 | * @retval None |
||
| 747 | */ |
||
| 748 | #define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__)) |
||
| 749 | |||
| 750 | /** @brief Set a specific SMARTCARD request flag. |
||
| 751 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 752 | * @param __REQ__ specifies the request flag to set |
||
| 753 | * This parameter can be one of the following values: |
||
| 754 | * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request |
||
| 755 | * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request |
||
| 756 | * @retval None |
||
| 757 | */ |
||
| 758 | #define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) |
||
| 759 | |||
| 760 | /** @brief Enable the SMARTCARD one bit sample method. |
||
| 761 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 762 | * @retval None |
||
| 763 | */ |
||
| 764 | #define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
||
| 765 | |||
| 766 | /** @brief Disable the SMARTCARD one bit sample method. |
||
| 767 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 768 | * @retval None |
||
| 769 | */ |
||
| 770 | #define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ |
||
| 771 | &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) |
||
| 772 | |||
| 773 | /** @brief Enable the USART associated to the SMARTCARD Handle. |
||
| 774 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 775 | * @retval None |
||
| 776 | */ |
||
| 777 | #define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
||
| 778 | |||
| 779 | /** @brief Disable the USART associated to the SMARTCARD Handle |
||
| 780 | * @param __HANDLE__ specifies the SMARTCARD Handle. |
||
| 781 | * @retval None |
||
| 782 | */ |
||
| 783 | #define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
||
| 784 | |||
| 785 | /** |
||
| 786 | * @} |
||
| 787 | */ |
||
| 788 | |||
| 789 | /* Private macros -------------------------------------------------------------*/ |
||
| 790 | /** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros |
||
| 791 | * @{ |
||
| 792 | */ |
||
| 793 | |||
| 794 | |||
| 795 | /** @brief Check the Baud rate range. |
||
| 796 | * @note The maximum Baud Rate is derived from the maximum clock on F0 (48 MHz) |
||
| 797 | * divided by the oversampling used on the SMARTCARD (i.e. 16). |
||
| 798 | * @param __BAUDRATE__ Baud rate set by the configuration function. |
||
| 799 | * @retval Test result (TRUE or FALSE) |
||
| 800 | */ |
||
| 801 | #define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 6000000U) |
||
| 802 | |||
| 803 | /** @brief Check the block length range. |
||
| 804 | * @note The maximum SMARTCARD block length is 0xFF. |
||
| 805 | * @param __LENGTH__ block length. |
||
| 806 | * @retval Test result (TRUE or FALSE) |
||
| 807 | */ |
||
| 808 | #define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU) |
||
| 809 | |||
| 810 | /** @brief Check the receiver timeout value. |
||
| 811 | * @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF. |
||
| 812 | * @param __TIMEOUTVALUE__ receiver timeout value. |
||
| 813 | * @retval Test result (TRUE or FALSE) |
||
| 814 | */ |
||
| 815 | #define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) |
||
| 816 | |||
| 817 | /** @brief Check the SMARTCARD autoretry counter value. |
||
| 818 | * @note The maximum number of retransmissions is 0x7. |
||
| 819 | * @param __COUNT__ number of retransmissions. |
||
| 820 | * @retval Test result (TRUE or FALSE) |
||
| 821 | */ |
||
| 822 | #define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U) |
||
| 823 | |||
| 824 | /** @brief Ensure that SMARTCARD frame length is valid. |
||
| 825 | * @param __LENGTH__ SMARTCARD frame length. |
||
| 826 | * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) |
||
| 827 | */ |
||
| 828 | #define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) |
||
| 829 | |||
| 830 | /** @brief Ensure that SMARTCARD frame number of stop bits is valid. |
||
| 831 | * @param __STOPBITS__ SMARTCARD frame number of stop bits. |
||
| 832 | * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) |
||
| 833 | */ |
||
| 834 | #define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\ |
||
| 835 | ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)) |
||
| 836 | |||
| 837 | /** @brief Ensure that SMARTCARD frame parity is valid. |
||
| 838 | * @param __PARITY__ SMARTCARD frame parity. |
||
| 839 | * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) |
||
| 840 | */ |
||
| 841 | #define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \ |
||
| 842 | ((__PARITY__) == SMARTCARD_PARITY_ODD)) |
||
| 843 | |||
| 844 | /** @brief Ensure that SMARTCARD communication mode is valid. |
||
| 845 | * @param __MODE__ SMARTCARD communication mode. |
||
| 846 | * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) |
||
| 847 | */ |
||
| 848 | #define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & 0xFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) |
||
| 849 | |||
| 850 | /** @brief Ensure that SMARTCARD frame polarity is valid. |
||
| 851 | * @param __CPOL__ SMARTCARD frame polarity. |
||
| 852 | * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) |
||
| 853 | */ |
||
| 854 | #define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW)\ |
||
| 855 | || ((__CPOL__) == SMARTCARD_POLARITY_HIGH)) |
||
| 856 | |||
| 857 | /** @brief Ensure that SMARTCARD frame phase is valid. |
||
| 858 | * @param __CPHA__ SMARTCARD frame phase. |
||
| 859 | * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) |
||
| 860 | */ |
||
| 861 | #define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) |
||
| 862 | |||
| 863 | /** @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid. |
||
| 864 | * @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting. |
||
| 865 | * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) |
||
| 866 | */ |
||
| 867 | #define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \ |
||
| 868 | ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE)) |
||
| 869 | |||
| 870 | /** @brief Ensure that SMARTCARD frame sampling is valid. |
||
| 871 | * @param __ONEBIT__ SMARTCARD frame sampling. |
||
| 872 | * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) |
||
| 873 | */ |
||
| 874 | #define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ |
||
| 875 | ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) |
||
| 876 | |||
| 877 | /** @brief Ensure that SMARTCARD NACK transmission setting is valid. |
||
| 878 | * @param __NACK__ SMARTCARD NACK transmission setting. |
||
| 879 | * @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid) |
||
| 880 | */ |
||
| 881 | #define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \ |
||
| 882 | ((__NACK__) == SMARTCARD_NACK_DISABLE)) |
||
| 883 | |||
| 884 | /** @brief Ensure that SMARTCARD receiver timeout setting is valid. |
||
| 885 | * @param __TIMEOUT__ SMARTCARD receiver timeout setting. |
||
| 886 | * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) |
||
| 887 | */ |
||
| 888 | #define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \ |
||
| 889 | ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE)) |
||
| 890 | |||
| 891 | /** @brief Ensure that SMARTCARD advanced features initialization is valid. |
||
| 892 | * @param __INIT__ SMARTCARD advanced features initialization. |
||
| 893 | * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) |
||
| 894 | */ |
||
| 895 | #define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ |
||
| 896 | SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ |
||
| 897 | SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ |
||
| 898 | SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ |
||
| 899 | SMARTCARD_ADVFEATURE_SWAP_INIT | \ |
||
| 900 | SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ |
||
| 901 | SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ |
||
| 902 | SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) |
||
| 903 | |||
| 904 | /** @brief Ensure that SMARTCARD frame TX inversion setting is valid. |
||
| 905 | * @param __TXINV__ SMARTCARD frame TX inversion setting. |
||
| 906 | * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) |
||
| 907 | */ |
||
| 908 | #define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ |
||
| 909 | ((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) |
||
| 910 | |||
| 911 | /** @brief Ensure that SMARTCARD frame RX inversion setting is valid. |
||
| 912 | * @param __RXINV__ SMARTCARD frame RX inversion setting. |
||
| 913 | * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) |
||
| 914 | */ |
||
| 915 | #define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ |
||
| 916 | ((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) |
||
| 917 | |||
| 918 | /** @brief Ensure that SMARTCARD frame data inversion setting is valid. |
||
| 919 | * @param __DATAINV__ SMARTCARD frame data inversion setting. |
||
| 920 | * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) |
||
| 921 | */ |
||
| 922 | #define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ |
||
| 923 | ((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) |
||
| 924 | |||
| 925 | /** @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid. |
||
| 926 | * @param __SWAP__ SMARTCARD frame RX/TX pins swap setting. |
||
| 927 | * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) |
||
| 928 | */ |
||
| 929 | #define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ |
||
| 930 | ((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) |
||
| 931 | |||
| 932 | /** @brief Ensure that SMARTCARD frame overrun setting is valid. |
||
| 933 | * @param __OVERRUN__ SMARTCARD frame overrun setting. |
||
| 934 | * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) |
||
| 935 | */ |
||
| 936 | #define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ |
||
| 937 | ((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) |
||
| 938 | |||
| 939 | /** @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid. |
||
| 940 | * @param __DMA__ SMARTCARD DMA enabling or disabling on error setting. |
||
| 941 | * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) |
||
| 942 | */ |
||
| 943 | #define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ |
||
| 944 | ((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) |
||
| 945 | |||
| 946 | /** @brief Ensure that SMARTCARD frame MSB first setting is valid. |
||
| 947 | * @param __MSBFIRST__ SMARTCARD frame MSB first setting. |
||
| 948 | * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) |
||
| 949 | */ |
||
| 950 | #define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ |
||
| 951 | ((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) |
||
| 952 | |||
| 953 | /** @brief Ensure that SMARTCARD request parameter is valid. |
||
| 954 | * @param __PARAM__ SMARTCARD request parameter. |
||
| 955 | * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) |
||
| 956 | */ |
||
| 957 | #define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ |
||
| 958 | ((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST)) |
||
| 959 | |||
| 960 | /** |
||
| 961 | * @} |
||
| 962 | */ |
||
| 963 | |||
| 964 | /* Include SMARTCARD HAL Extended module */ |
||
| 965 | #include "stm32f0xx_hal_smartcard_ex.h" |
||
| 966 | |||
| 967 | /* Exported functions --------------------------------------------------------*/ |
||
| 968 | /** @addtogroup SMARTCARD_Exported_Functions |
||
| 969 | * @{ |
||
| 970 | */ |
||
| 971 | |||
| 972 | /* Initialization and de-initialization functions ****************************/ |
||
| 973 | /** @addtogroup SMARTCARD_Exported_Functions_Group1 |
||
| 974 | * @{ |
||
| 975 | */ |
||
| 976 | |||
| 977 | HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 978 | HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 979 | void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 980 | void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 981 | |||
| 982 | #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) |
||
| 983 | /* Callbacks Register/UnRegister functions ***********************************/ |
||
| 984 | HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, |
||
| 985 | HAL_SMARTCARD_CallbackIDTypeDef CallbackID, |
||
| 986 | pSMARTCARD_CallbackTypeDef pCallback); |
||
| 987 | HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, |
||
| 988 | HAL_SMARTCARD_CallbackIDTypeDef CallbackID); |
||
| 989 | #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ |
||
| 990 | |||
| 991 | /** |
||
| 992 | * @} |
||
| 993 | */ |
||
| 994 | |||
| 995 | /* IO operation functions *****************************************************/ |
||
| 996 | /** @addtogroup SMARTCARD_Exported_Functions_Group2 |
||
| 997 | * @{ |
||
| 998 | */ |
||
| 999 | |||
| 1000 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, |
||
| 1001 | uint32_t Timeout); |
||
| 1002 | HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, |
||
| 1003 | uint32_t Timeout); |
||
| 1004 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); |
||
| 1005 | HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); |
||
| 1006 | HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); |
||
| 1007 | HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); |
||
| 1008 | /* Transfer Abort functions */ |
||
| 1009 | HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1010 | HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1011 | HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1012 | HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1013 | HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1014 | HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1015 | |||
| 1016 | void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1017 | void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1018 | void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1019 | void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1020 | void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1021 | void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1022 | void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1023 | |||
| 1024 | /** |
||
| 1025 | * @} |
||
| 1026 | */ |
||
| 1027 | |||
| 1028 | /* Peripheral State and Error functions ***************************************/ |
||
| 1029 | /** @addtogroup SMARTCARD_Exported_Functions_Group4 |
||
| 1030 | * @{ |
||
| 1031 | */ |
||
| 1032 | |||
| 1033 | HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1034 | uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard); |
||
| 1035 | |||
| 1036 | /** |
||
| 1037 | * @} |
||
| 1038 | */ |
||
| 1039 | |||
| 1040 | /** |
||
| 1041 | * @} |
||
| 1042 | */ |
||
| 1043 | |||
| 1044 | /** |
||
| 1045 | * @} |
||
| 1046 | */ |
||
| 1047 | |||
| 1048 | /** |
||
| 1049 | * @} |
||
| 1050 | */ |
||
| 1051 | #endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ |
||
| 1052 | #ifdef __cplusplus |
||
| 1053 | } |
||
| 1054 | #endif |
||
| 1055 | |||
| 1056 | #endif /* STM32F0xx_HAL_SMARTCARD_H */ |
||
| 1057 | |||
| 1058 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |