Details | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
2 | mjames | 1 | /** |
2 | ****************************************************************************** |
||
3 | * @file stm32f0xx_hal_dma.h |
||
4 | * @author MCD Application Team |
||
5 | * @brief Header file of DMA HAL module. |
||
6 | ****************************************************************************** |
||
7 | * @attention |
||
8 | * |
||
9 | * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
||
10 | * All rights reserved.</center></h2> |
||
11 | * |
||
12 | * This software component is licensed by ST under BSD 3-Clause license, |
||
13 | * the "License"; You may not use this file except in compliance with the |
||
14 | * License. You may obtain a copy of the License at: |
||
15 | * opensource.org/licenses/BSD-3-Clause |
||
16 | * |
||
17 | ****************************************************************************** |
||
18 | */ |
||
19 | |||
20 | /* Define to prevent recursive inclusion -------------------------------------*/ |
||
21 | #ifndef __STM32F0xx_HAL_DMA_H |
||
22 | #define __STM32F0xx_HAL_DMA_H |
||
23 | |||
24 | #ifdef __cplusplus |
||
25 | extern "C" { |
||
26 | #endif |
||
27 | |||
28 | /* Includes ------------------------------------------------------------------*/ |
||
29 | #include "stm32f0xx_hal_def.h" |
||
30 | |||
31 | /** @addtogroup STM32F0xx_HAL_Driver |
||
32 | * @{ |
||
33 | */ |
||
34 | |||
35 | /** @addtogroup DMA |
||
36 | * @{ |
||
37 | */ |
||
38 | |||
39 | /* Exported types ------------------------------------------------------------*/ |
||
40 | |||
41 | /** @defgroup DMA_Exported_Types DMA Exported Types |
||
42 | * @{ |
||
43 | */ |
||
44 | |||
45 | /** |
||
46 | * @brief DMA Configuration Structure definition |
||
47 | */ |
||
48 | typedef struct |
||
49 | { |
||
50 | uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, |
||
51 | from memory to memory or from peripheral to memory. |
||
52 | This parameter can be a value of @ref DMA_Data_transfer_direction */ |
||
53 | |||
54 | uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. |
||
55 | This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ |
||
56 | |||
57 | uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. |
||
58 | This parameter can be a value of @ref DMA_Memory_incremented_mode */ |
||
59 | |||
60 | uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. |
||
61 | This parameter can be a value of @ref DMA_Peripheral_data_size */ |
||
62 | |||
63 | uint32_t MemDataAlignment; /*!< Specifies the Memory data width. |
||
64 | This parameter can be a value of @ref DMA_Memory_data_size */ |
||
65 | |||
66 | uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. |
||
67 | This parameter can be a value of @ref DMA_mode |
||
68 | @note The circular buffer mode cannot be used if the memory-to-memory |
||
69 | data transfer is configured on the selected Channel */ |
||
70 | |||
71 | uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. |
||
72 | This parameter can be a value of @ref DMA_Priority_level */ |
||
73 | } DMA_InitTypeDef; |
||
74 | |||
75 | /** |
||
76 | * @brief HAL DMA State structures definition |
||
77 | */ |
||
78 | typedef enum |
||
79 | { |
||
80 | HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ |
||
81 | HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ |
||
82 | HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ |
||
83 | HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ |
||
84 | }HAL_DMA_StateTypeDef; |
||
85 | |||
86 | /** |
||
87 | * @brief HAL DMA Error Code structure definition |
||
88 | */ |
||
89 | typedef enum |
||
90 | { |
||
91 | HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ |
||
92 | HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ |
||
93 | }HAL_DMA_LevelCompleteTypeDef; |
||
94 | |||
95 | /** |
||
96 | * @brief HAL DMA Callback ID structure definition |
||
97 | */ |
||
98 | typedef enum |
||
99 | { |
||
100 | HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ |
||
101 | HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ |
||
102 | HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ |
||
103 | HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ |
||
104 | HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ |
||
105 | |||
106 | }HAL_DMA_CallbackIDTypeDef; |
||
107 | |||
108 | /** |
||
109 | * @brief DMA handle Structure definition |
||
110 | */ |
||
111 | typedef struct __DMA_HandleTypeDef |
||
112 | { |
||
113 | DMA_Channel_TypeDef *Instance; /*!< Register base address */ |
||
114 | |||
115 | DMA_InitTypeDef Init; /*!< DMA communication parameters */ |
||
116 | |||
117 | HAL_LockTypeDef Lock; /*!< DMA locking object */ |
||
118 | |||
119 | __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ |
||
120 | |||
121 | void *Parent; /*!< Parent object state */ |
||
122 | |||
123 | void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ |
||
124 | |||
125 | void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ |
||
126 | |||
127 | void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ |
||
128 | |||
129 | void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ |
||
130 | |||
131 | __IO uint32_t ErrorCode; /*!< DMA Error code */ |
||
132 | |||
133 | DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ |
||
134 | |||
135 | uint32_t ChannelIndex; /*!< DMA Channel Index */ |
||
136 | } DMA_HandleTypeDef; |
||
137 | |||
138 | /** |
||
139 | * @} |
||
140 | */ |
||
141 | |||
142 | /* Exported constants --------------------------------------------------------*/ |
||
143 | |||
144 | /** @defgroup DMA_Exported_Constants DMA Exported Constants |
||
145 | * @{ |
||
146 | */ |
||
147 | |||
148 | /** @defgroup DMA_Error_Code DMA Error Code |
||
149 | * @{ |
||
150 | */ |
||
151 | #define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */ |
||
152 | #define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */ |
||
153 | #define HAL_DMA_ERROR_NO_XFER (0x00000004U) /*!< no ongoin transfer */ |
||
154 | #define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ |
||
155 | #define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */ |
||
156 | /** |
||
157 | * @} |
||
158 | */ |
||
159 | |||
160 | /** @defgroup DMA_Data_transfer_direction DMA Data transfer direction |
||
161 | * @{ |
||
162 | */ |
||
163 | #define DMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */ |
||
164 | #define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ |
||
165 | #define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */ |
||
166 | |||
167 | /** |
||
168 | * @} |
||
169 | */ |
||
170 | |||
171 | /** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode |
||
172 | * @{ |
||
173 | */ |
||
174 | #define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ |
||
175 | #define DMA_PINC_DISABLE (0x00000000U) /*!< Peripheral increment mode Disable */ |
||
176 | /** |
||
177 | * @} |
||
178 | */ |
||
179 | |||
180 | /** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode |
||
181 | * @{ |
||
182 | */ |
||
183 | #define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ |
||
184 | #define DMA_MINC_DISABLE (0x00000000U) /*!< Memory increment mode Disable */ |
||
185 | /** |
||
186 | * @} |
||
187 | */ |
||
188 | |||
189 | /** @defgroup DMA_Peripheral_data_size DMA Peripheral data size |
||
190 | * @{ |
||
191 | */ |
||
192 | #define DMA_PDATAALIGN_BYTE (0x00000000U) /*!< Peripheral data alignment : Byte */ |
||
193 | #define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */ |
||
194 | #define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */ |
||
195 | /** |
||
196 | * @} |
||
197 | */ |
||
198 | |||
199 | /** @defgroup DMA_Memory_data_size DMA Memory data size |
||
200 | * @{ |
||
201 | */ |
||
202 | #define DMA_MDATAALIGN_BYTE (0x00000000U) /*!< Memory data alignment : Byte */ |
||
203 | #define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */ |
||
204 | #define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */ |
||
205 | /** |
||
206 | * @} |
||
207 | */ |
||
208 | |||
209 | /** @defgroup DMA_mode DMA mode |
||
210 | * @{ |
||
211 | */ |
||
212 | #define DMA_NORMAL (0x00000000U) /*!< Normal Mode */ |
||
213 | #define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */ |
||
214 | /** |
||
215 | * @} |
||
216 | */ |
||
217 | |||
218 | /** @defgroup DMA_Priority_level DMA Priority level |
||
219 | * @{ |
||
220 | */ |
||
221 | #define DMA_PRIORITY_LOW (0x00000000U) /*!< Priority level : Low */ |
||
222 | #define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ |
||
223 | #define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ |
||
224 | #define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ |
||
225 | /** |
||
226 | * @} |
||
227 | */ |
||
228 | |||
229 | |||
230 | /** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions |
||
231 | * @{ |
||
232 | */ |
||
233 | #define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) |
||
234 | #define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) |
||
235 | #define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) |
||
236 | /** |
||
237 | * @} |
||
238 | */ |
||
239 | |||
240 | /** @defgroup DMA_flag_definitions DMA flag definitions |
||
241 | * @{ |
||
242 | */ |
||
243 | |||
244 | #define DMA_FLAG_GL1 (0x00000001U) /*!< Channel 1 global interrupt flag */ |
||
245 | #define DMA_FLAG_TC1 (0x00000002U) /*!< Channel 1 transfer complete flag */ |
||
246 | #define DMA_FLAG_HT1 (0x00000004U) /*!< Channel 1 half transfer flag */ |
||
247 | #define DMA_FLAG_TE1 (0x00000008U) /*!< Channel 1 transfer error flag */ |
||
248 | #define DMA_FLAG_GL2 (0x00000010U) /*!< Channel 2 global interrupt flag */ |
||
249 | #define DMA_FLAG_TC2 (0x00000020U) /*!< Channel 2 transfer complete flag */ |
||
250 | #define DMA_FLAG_HT2 (0x00000040U) /*!< Channel 2 half transfer flag */ |
||
251 | #define DMA_FLAG_TE2 (0x00000080U) /*!< Channel 2 transfer error flag */ |
||
252 | #define DMA_FLAG_GL3 (0x00000100U) /*!< Channel 3 global interrupt flag */ |
||
253 | #define DMA_FLAG_TC3 (0x00000200U) /*!< Channel 3 transfer complete flag */ |
||
254 | #define DMA_FLAG_HT3 (0x00000400U) /*!< Channel 3 half transfer flag */ |
||
255 | #define DMA_FLAG_TE3 (0x00000800U) /*!< Channel 3 transfer error flag */ |
||
256 | #define DMA_FLAG_GL4 (0x00001000U) /*!< Channel 4 global interrupt flag */ |
||
257 | #define DMA_FLAG_TC4 (0x00002000U) /*!< Channel 4 transfer complete flag */ |
||
258 | #define DMA_FLAG_HT4 (0x00004000U) /*!< Channel 4 half transfer flag */ |
||
259 | #define DMA_FLAG_TE4 (0x00008000U) /*!< Channel 4 transfer error flag */ |
||
260 | #define DMA_FLAG_GL5 (0x00010000U) /*!< Channel 5 global interrupt flag */ |
||
261 | #define DMA_FLAG_TC5 (0x00020000U) /*!< Channel 5 transfer complete flag */ |
||
262 | #define DMA_FLAG_HT5 (0x00040000U) /*!< Channel 5 half transfer flag */ |
||
263 | #define DMA_FLAG_TE5 (0x00080000U) /*!< Channel 5 transfer error flag */ |
||
264 | #define DMA_FLAG_GL6 (0x00100000U) /*!< Channel 6 global interrupt flag */ |
||
265 | #define DMA_FLAG_TC6 (0x00200000U) /*!< Channel 6 transfer complete flag */ |
||
266 | #define DMA_FLAG_HT6 (0x00400000U) /*!< Channel 6 half transfer flag */ |
||
267 | #define DMA_FLAG_TE6 (0x00800000U) /*!< Channel 6 transfer error flag */ |
||
268 | #define DMA_FLAG_GL7 (0x01000000U) /*!< Channel 7 global interrupt flag */ |
||
269 | #define DMA_FLAG_TC7 (0x02000000U) /*!< Channel 7 transfer complete flag */ |
||
270 | #define DMA_FLAG_HT7 (0x04000000U) /*!< Channel 7 half transfer flag */ |
||
271 | #define DMA_FLAG_TE7 (0x08000000U) /*!< Channel 7 transfer error flag */ |
||
272 | |||
273 | /** |
||
274 | * @} |
||
275 | */ |
||
276 | |||
277 | #if defined(SYSCFG_CFGR1_DMA_RMP) |
||
278 | /** @defgroup HAL_DMA_remapping HAL DMA remapping |
||
279 | * Elements values convention: 0xYYYYYYYY |
||
280 | * - YYYYYYYY : Position in the SYSCFG register CFGR1 |
||
281 | * @{ |
||
282 | */ |
||
283 | #define DMA_REMAP_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap |
||
284 | 0: No remap (ADC DMA requests mapped on DMA channel 1 |
||
285 | 1: Remap (ADC DMA requests mapped on DMA channel 2 */ |
||
286 | #define DMA_REMAP_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap |
||
287 | 0: No remap (USART1_TX DMA request mapped on DMA channel 2 |
||
288 | 1: Remap (USART1_TX DMA request mapped on DMA channel 4 */ |
||
289 | #define DMA_REMAP_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap |
||
290 | 0: No remap (USART1_RX DMA request mapped on DMA channel 3 |
||
291 | 1: Remap (USART1_RX DMA request mapped on DMA channel 5 */ |
||
292 | #define DMA_REMAP_TIM16_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap |
||
293 | 0: No remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3) |
||
294 | 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4) */ |
||
295 | #define DMA_REMAP_TIM17_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17 DMA request remap |
||
296 | 0: No remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1 |
||
297 | 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */ |
||
298 | #if defined (STM32F070xB) |
||
299 | #define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F070xB devices only. |
||
300 | 0: Disabled, need to remap before use |
||
301 | 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */ |
||
302 | |||
303 | #endif |
||
304 | |||
305 | #if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) |
||
306 | #define DMA_REMAP_TIM16_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16 alternate DMA request remapping bit. Available on STM32F07x devices only |
||
307 | 0: No alternate remap (TIM16 DMA requestsmapped according to TIM16_DMA_RMP bit) |
||
308 | 1: Alternate remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6) */ |
||
309 | #define DMA_REMAP_TIM17_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17 alternate DMA request remapping bit. Available on STM32F07x devices only |
||
310 | 0: No alternate remap (TIM17 DMA requestsmapped according to TIM17_DMA_RMP bit) |
||
311 | 1: Alternate remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7) */ |
||
312 | #define DMA_REMAP_SPI2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_SPI2_DMA_RMP) /*!< SPI2 DMA request remapping bit. Available on STM32F07x devices only. |
||
313 | 0: No remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively) |
||
314 | 1: Remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */ |
||
315 | #define DMA_REMAP_USART2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2 DMA request remapping bit. Available on STM32F07x devices only. |
||
316 | 0: No remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively) |
||
317 | 1: 1: Remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */ |
||
318 | #define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F07x devices only. |
||
319 | 0: No remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively) |
||
320 | 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */ |
||
321 | #define DMA_REMAP_I2C1_DMA_CH76 ((uint32_t)SYSCFG_CFGR1_I2C1_DMA_RMP) /*!< I2C1 DMA request remapping bit. Available on STM32F07x devices only. |
||
322 | 0: No remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively) |
||
323 | 1: Remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively) */ |
||
324 | #define DMA_REMAP_TIM1_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1 DMA request remapping bit. Available on STM32F07x devices only. |
||
325 | 0: No remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively) |
||
326 | 1: Remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */ |
||
327 | #define DMA_REMAP_TIM2_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2 DMA request remapping bit. Available on STM32F07x devices only. |
||
328 | 0: No remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively) |
||
329 | 1: Remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */ |
||
330 | #define DMA_REMAP_TIM3_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3 DMA request remapping bit. Available on STM32F07x devices only. |
||
331 | 0: No remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4) |
||
332 | 1: Remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6) */ |
||
333 | #endif |
||
334 | |||
335 | /** |
||
336 | * @} |
||
337 | */ |
||
338 | |||
339 | #endif /* SYSCFG_CFGR1_DMA_RMP */ |
||
340 | /** |
||
341 | * @} |
||
342 | */ |
||
343 | |||
344 | /* Exported macro ------------------------------------------------------------*/ |
||
345 | /** @defgroup DMA_Exported_Macros DMA Exported Macros |
||
346 | * @{ |
||
347 | */ |
||
348 | |||
349 | /** @brief Reset DMA handle state |
||
350 | * @param __HANDLE__ DMA handle. |
||
351 | * @retval None |
||
352 | */ |
||
353 | #define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) |
||
354 | |||
355 | /** |
||
356 | * @brief Enable the specified DMA Channel. |
||
357 | * @param __HANDLE__ DMA handle |
||
358 | * @retval None |
||
359 | */ |
||
360 | #define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) |
||
361 | |||
362 | /** |
||
363 | * @brief Disable the specified DMA Channel. |
||
364 | * @param __HANDLE__ DMA handle |
||
365 | * @retval None |
||
366 | */ |
||
367 | #define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) |
||
368 | |||
369 | |||
370 | /* Interrupt & Flag management */ |
||
371 | |||
372 | /** |
||
373 | * @brief Enables the specified DMA Channel interrupts. |
||
374 | * @param __HANDLE__ DMA handle |
||
375 | * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. |
||
376 | * This parameter can be any combination of the following values: |
||
377 | * @arg DMA_IT_TC: Transfer complete interrupt mask |
||
378 | * @arg DMA_IT_HT: Half transfer complete interrupt mask |
||
379 | * @arg DMA_IT_TE: Transfer error interrupt mask |
||
380 | * @retval None |
||
381 | */ |
||
382 | #define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) |
||
383 | |||
384 | /** |
||
385 | * @brief Disables the specified DMA Channel interrupts. |
||
386 | * @param __HANDLE__ DMA handle |
||
387 | * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. |
||
388 | * This parameter can be any combination of the following values: |
||
389 | * @arg DMA_IT_TC: Transfer complete interrupt mask |
||
390 | * @arg DMA_IT_HT: Half transfer complete interrupt mask |
||
391 | * @arg DMA_IT_TE: Transfer error interrupt mask |
||
392 | * @retval None |
||
393 | */ |
||
394 | #define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) |
||
395 | |||
396 | /** |
||
397 | * @brief Checks whether the specified DMA Channel interrupt is enabled or disabled. |
||
398 | * @param __HANDLE__ DMA handle |
||
399 | * @param __INTERRUPT__ specifies the DMA interrupt source to check. |
||
400 | * This parameter can be one of the following values: |
||
401 | * @arg DMA_IT_TC: Transfer complete interrupt mask |
||
402 | * @arg DMA_IT_HT: Half transfer complete interrupt mask |
||
403 | * @arg DMA_IT_TE: Transfer error interrupt mask |
||
404 | * @retval The state of DMA_IT (SET or RESET). |
||
405 | */ |
||
406 | #define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) |
||
407 | |||
408 | /** |
||
409 | * @brief Returns the number of remaining data units in the current DMAy Channelx transfer. |
||
410 | * @param __HANDLE__ DMA handle |
||
411 | * |
||
412 | * @retval The number of remaining data units in the current DMA Channel transfer. |
||
413 | */ |
||
414 | #define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) |
||
415 | |||
416 | #if defined(SYSCFG_CFGR1_DMA_RMP) |
||
417 | /** @brief DMA remapping enable/disable macros |
||
418 | * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_remapping |
||
419 | */ |
||
420 | #define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \ |
||
421 | SYSCFG->CFGR1 |= (__DMA_REMAP__); \ |
||
422 | }while(0) |
||
423 | #define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \ |
||
424 | SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \ |
||
425 | }while(0) |
||
426 | #endif /* SYSCFG_CFGR1_DMA_RMP */ |
||
427 | |||
428 | /** |
||
429 | * @} |
||
430 | */ |
||
431 | |||
432 | /* Include DMA HAL Extension module */ |
||
433 | #include "stm32f0xx_hal_dma_ex.h" |
||
434 | |||
435 | /* Exported functions --------------------------------------------------------*/ |
||
436 | /** @addtogroup DMA_Exported_Functions |
||
437 | * @{ |
||
438 | */ |
||
439 | |||
440 | /** @addtogroup DMA_Exported_Functions_Group1 |
||
441 | * @{ |
||
442 | */ |
||
443 | /* Initialization and de-initialization functions *****************************/ |
||
444 | HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); |
||
445 | HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); |
||
446 | /** |
||
447 | * @} |
||
448 | */ |
||
449 | |||
450 | /** @addtogroup DMA_Exported_Functions_Group2 |
||
451 | * @{ |
||
452 | */ |
||
453 | /* Input and Output operation functions *****************************************************/ |
||
454 | HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); |
||
455 | HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); |
||
456 | HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); |
||
457 | HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); |
||
458 | HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); |
||
459 | void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); |
||
460 | HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); |
||
461 | HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); |
||
462 | |||
463 | /** |
||
464 | * @} |
||
465 | */ |
||
466 | |||
467 | /** @addtogroup DMA_Exported_Functions_Group3 |
||
468 | * @{ |
||
469 | */ |
||
470 | /* Peripheral State and Error functions ***************************************/ |
||
471 | HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); |
||
472 | uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); |
||
473 | /** |
||
474 | * @} |
||
475 | */ |
||
476 | |||
477 | /** |
||
478 | * @} |
||
479 | */ |
||
480 | |||
481 | /** @addtogroup DMA_Private_Macros |
||
482 | * @{ |
||
483 | */ |
||
484 | #define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ |
||
485 | ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ |
||
486 | ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) |
||
487 | #define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ |
||
488 | ((STATE) == DMA_PINC_DISABLE)) |
||
489 | |||
490 | #define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ |
||
491 | ((STATE) == DMA_MINC_DISABLE)) |
||
492 | |||
493 | #define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ |
||
494 | ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ |
||
495 | ((SIZE) == DMA_PDATAALIGN_WORD)) |
||
496 | |||
497 | #define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ |
||
498 | ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ |
||
499 | ((SIZE) == DMA_MDATAALIGN_WORD )) |
||
500 | |||
501 | #define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ |
||
502 | ((MODE) == DMA_CIRCULAR)) |
||
503 | #define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ |
||
504 | ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ |
||
505 | ((PRIORITY) == DMA_PRIORITY_HIGH) || \ |
||
506 | ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) |
||
507 | #define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) |
||
508 | |||
509 | #if defined(SYSCFG_CFGR1_DMA_RMP) |
||
510 | |||
511 | #if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) |
||
512 | #define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ |
||
513 | ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ |
||
514 | ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ |
||
515 | ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ |
||
516 | ((RMP) == DMA_REMAP_TIM17_DMA_CH2) || \ |
||
517 | ((RMP) == DMA_REMAP_TIM16_DMA_CH6) || \ |
||
518 | ((RMP) == DMA_REMAP_TIM17_DMA_CH7) || \ |
||
519 | ((RMP) == DMA_REMAP_SPI2_DMA_CH67) || \ |
||
520 | ((RMP) == DMA_REMAP_USART2_DMA_CH67) || \ |
||
521 | ((RMP) == DMA_REMAP_USART3_DMA_CH32) || \ |
||
522 | ((RMP) == DMA_REMAP_I2C1_DMA_CH76) || \ |
||
523 | ((RMP) == DMA_REMAP_TIM1_DMA_CH6) || \ |
||
524 | ((RMP) == DMA_REMAP_TIM2_DMA_CH7) || \ |
||
525 | ((RMP) == DMA_REMAP_TIM3_DMA_CH6)) |
||
526 | #elif defined (STM32F070xB) |
||
527 | #define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_USART3_DMA_CH32) || \ |
||
528 | ((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ |
||
529 | ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ |
||
530 | ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ |
||
531 | ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ |
||
532 | ((RMP) == DMA_REMAP_TIM17_DMA_CH2)) |
||
533 | #else |
||
534 | #define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2) || \ |
||
535 | ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \ |
||
536 | ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \ |
||
537 | ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \ |
||
538 | ((RMP) == DMA_REMAP_TIM17_DMA_CH2)) |
||
539 | #endif |
||
540 | |||
541 | #endif /* SYSCFG_CFGR1_DMA_RMP */ |
||
542 | |||
543 | |||
544 | /** |
||
545 | * @} |
||
546 | */ |
||
547 | |||
548 | /** |
||
549 | * @} |
||
550 | */ |
||
551 | |||
552 | /** |
||
553 | * @} |
||
554 | */ |
||
555 | |||
556 | #ifdef __cplusplus |
||
557 | } |
||
558 | #endif |
||
559 | |||
560 | #endif /* __STM32F0xx_HAL_DMA_H */ |
||
561 | |||
562 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
||
563 |