Subversion Repositories EDIS_Ignition

/**************************************************************************//**

 * @file     core_cm1.h

 * @brief    CMSIS Cortex-M1 Core Peripheral Access Layer Header File

 * @version  V1.0.0

 * @date     23. July 2018

 ******************************************************************************/

/*

 * Copyright (c) 2009-2018 Arm Limited. All rights reserved.

 *

 * SPDX-License-Identifier: Apache-2.0

 *

 * Licensed under the Apache License, Version 2.0 (the License); you may

 * not use this file except in compliance with the License.

 * You may obtain a copy of the License at

 *

 * www.apache.org/licenses/LICENSE-2.0

 *

 * Unless required by applicable law or agreed to in writing, software

 * distributed under the License is distributed on an AS IS BASIS, WITHOUT

 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

 * See the License for the specific language governing permissions and

 * limitations under the License.

 */

#if   defined ( __ICCARM__ )

  #pragma system_include         /* treat file as system include file for MISRA check */

#elif defined (__clang__)

  #pragma clang system_header   /* treat file as system include file */

#endif

#ifndef __CORE_CM1_H_GENERIC

#define __CORE_CM1_H_GENERIC

#include <stdint.h>

#ifdef __cplusplus

 extern "C" {

#endif

/**

  \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions

  CMSIS violates the following MISRA-C:2004 rules:

   \li Required Rule 8.5, object/function definition in header file.<br>

     Function definitions in header files are used to allow 'inlining'.

   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>

     Unions are used for effective representation of core registers.

   \li Advisory Rule 19.7, Function-like macro defined.<br>

     Function-like macros are used to allow more efficient code.

 */

/*******************************************************************************

 *                 CMSIS definitions

 ******************************************************************************/

/**

  \ingroup Cortex_M1

  @{

 */

#include "cmsis_version.h"

/*  CMSIS CM1 definitions */

#define __CM1_CMSIS_VERSION_MAIN  (__CM_CMSIS_VERSION_MAIN)              /*!< \deprecated [31:16] CMSIS HAL main version */

#define __CM1_CMSIS_VERSION_SUB   (__CM_CMSIS_VERSION_SUB)               /*!< \deprecated [15:0]  CMSIS HAL sub version */

#define __CM1_CMSIS_VERSION       ((__CM1_CMSIS_VERSION_MAIN << 16U) | \

                                    __CM1_CMSIS_VERSION_SUB           )  /*!< \deprecated CMSIS HAL version number */

#define __CORTEX_M                (1U)                                   /*!< Cortex-M Core */

/** __FPU_USED indicates whether an FPU is used or not.

    This core does not support an FPU at all

*/

#define __FPU_USED       0U

#if defined ( __CC_ARM )

  #if defined __TARGET_FPU_VFP

    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"

  #endif

#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)

  #if defined __ARM_PCS_VFP

    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"

  #endif

#elif defined ( __GNUC__ )

  #if defined (__VFP_FP__) && !defined(__SOFTFP__)

    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"

  #endif

#elif defined ( __ICCARM__ )

  #if defined __ARMVFP__

    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"

  #endif

#elif defined ( __TI_ARM__ )

  #if defined __TI_VFP_SUPPORT__

    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"

  #endif

#elif defined ( __TASKING__ )

  #if defined __FPU_VFP__

    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"

  #endif

#elif defined ( __CSMC__ )

  #if ( __CSMC__ & 0x400U)

    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"

  #endif

#endif

#include "cmsis_compiler.h"               /* CMSIS compiler specific defines */

#ifdef __cplusplus

}

#endif

#endif /* __CORE_CM1_H_GENERIC */

#ifndef __CMSIS_GENERIC

#ifndef __CORE_CM1_H_DEPENDANT

#define __CORE_CM1_H_DEPENDANT

#ifdef __cplusplus

 extern "C" {

#endif

/* check device defines and use defaults */

#if defined __CHECK_DEVICE_DEFINES

  #ifndef __CM1_REV

    #define __CM1_REV               0x0100U

    #warning "__CM1_REV not defined in device header file; using default!"

  #endif

  #ifndef __NVIC_PRIO_BITS

    #define __NVIC_PRIO_BITS          2U

    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"

  #endif

  #ifndef __Vendor_SysTickConfig

    #define __Vendor_SysTickConfig    0U

    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"

  #endif

#endif

/* IO definitions (access restrictions to peripheral registers) */

/**

    \defgroup CMSIS_glob_defs CMSIS Global Defines

    <strong>IO Type Qualifiers</strong> are used

    \li to specify the access to peripheral variables.

    \li for automatic generation of peripheral register debug information.

*/

#ifdef __cplusplus

  #define   __I     volatile             /*!< Defines 'read only' permissions */

#else

  #define   __I     volatile const       /*!< Defines 'read only' permissions */

#endif

#define     __O     volatile             /*!< Defines 'write only' permissions */

#define     __IO    volatile             /*!< Defines 'read / write' permissions */

/* following defines should be used for structure members */

#define     __IM     volatile const      /*! Defines 'read only' structure member permissions */

#define     __OM     volatile            /*! Defines 'write only' structure member permissions */

#define     __IOM    volatile            /*! Defines 'read / write' structure member permissions */

/*@} end of group Cortex_M1 */

/*******************************************************************************

 *                 Register Abstraction

  Core Register contain:

  - Core Register

  - Core NVIC Register

  - Core SCB Register

  - Core SysTick Register

 ******************************************************************************/

/**

  \defgroup CMSIS_core_register Defines and Type Definitions

  \brief Type definitions and defines for Cortex-M processor based devices.

*/

/**

  \ingroup    CMSIS_core_register

  \defgroup   CMSIS_CORE  Status and Control Registers

  \brief      Core Register type definitions.

  @{

 */

/**

  \brief  Union type to access the Application Program Status Register (APSR).

 */

typedef union

{

  struct

  {

    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved */

    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */

    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */

    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */

    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */

  } b;                                   /*!< Structure used for bit  access */

  uint32_t w;                            /*!< Type      used for word access */

} APSR_Type;

/* APSR Register Definitions */

#define APSR_N_Pos                         31U                                            /*!< APSR: N Position */

#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */

#define APSR_Z_Pos                         30U                                            /*!< APSR: Z Position */

#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */

#define APSR_C_Pos                         29U                                            /*!< APSR: C Position */

#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */

#define APSR_V_Pos                         28U                                            /*!< APSR: V Position */

#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */

/**

  \brief  Union type to access the Interrupt Program Status Register (IPSR).

 */

typedef union

{

  struct

  {

    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */

    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved */

  } b;                                   /*!< Structure used for bit  access */

  uint32_t w;                            /*!< Type      used for word access */

} IPSR_Type;

/* IPSR Register Definitions */

#define IPSR_ISR_Pos                        0U                                            /*!< IPSR: ISR Position */

#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */

/**

  \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).

 */

typedef union

{

  struct

  {

    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number */

    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved */

    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0) */

    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved */

    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag */

    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag */

    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag */

    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag */

  } b;                                   /*!< Structure used for bit  access */

  uint32_t w;                            /*!< Type      used for word access */

} xPSR_Type;

/* xPSR Register Definitions */

#define xPSR_N_Pos                         31U                                            /*!< xPSR: N Position */

#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */

#define xPSR_Z_Pos                         30U                                            /*!< xPSR: Z Position */

#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */

#define xPSR_C_Pos                         29U                                            /*!< xPSR: C Position */

#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */

#define xPSR_V_Pos                         28U                                            /*!< xPSR: V Position */

#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */

#define xPSR_T_Pos                         24U                                            /*!< xPSR: T Position */

#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */

#define xPSR_ISR_Pos                        0U                                            /*!< xPSR: ISR Position */

#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */

/**

  \brief  Union type to access the Control Registers (CONTROL).

 */

typedef union

{

  struct

  {

    uint32_t _reserved0:1;               /*!< bit:      0  Reserved */

    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used */

    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved */

  } b;                                   /*!< Structure used for bit  access */

  uint32_t w;                            /*!< Type      used for word access */

} CONTROL_Type;

/* CONTROL Register Definitions */

#define CONTROL_SPSEL_Pos                   1U                                            /*!< CONTROL: SPSEL Position */

#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */

/*@} end of group CMSIS_CORE */

/**

  \ingroup    CMSIS_core_register

  \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)

  \brief      Type definitions for the NVIC Registers

  @{

 */

/**

  \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).

 */

typedef struct

{

  __IOM uint32_t ISER[1U];               /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register */

        uint32_t RESERVED0[31U];

  __IOM uint32_t ICER[1U];               /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register */

        uint32_t RSERVED1[31U];

  __IOM uint32_t ISPR[1U];               /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register */

        uint32_t RESERVED2[31U];

  __IOM uint32_t ICPR[1U];               /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register */

        uint32_t RESERVED3[31U];

        uint32_t RESERVED4[64U];

  __IOM uint32_t IP[8U];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register */

}  NVIC_Type;

/*@} end of group CMSIS_NVIC */

/**

  \ingroup  CMSIS_core_register

  \defgroup CMSIS_SCB     System Control Block (SCB)

  \brief    Type definitions for the System Control Block Registers

  @{

 */

/**

  \brief  Structure type to access the System Control Block (SCB).

 */

typedef struct

{

  __IM  uint32_t CPUID;                  /*!< Offset: 0x000 (R/ )  CPUID Base Register */

  __IOM uint32_t ICSR;                   /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register */

        uint32_t RESERVED0;

  __IOM uint32_t AIRCR;                  /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register */

  __IOM uint32_t SCR;                    /*!< Offset: 0x010 (R/W)  System Control Register */

  __IOM uint32_t CCR;                    /*!< Offset: 0x014 (R/W)  Configuration Control Register */

        uint32_t RESERVED1;

  __IOM uint32_t SHP[2U];                /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED */

  __IOM uint32_t SHCSR;                  /*!< Offset: 0x024 (R/W)  System Handler Control and State Register */

} SCB_Type;

/* SCB CPUID Register Definitions */

#define SCB_CPUID_IMPLEMENTER_Pos          24U                                            /*!< SCB CPUID: IMPLEMENTER Position */

#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */

#define SCB_CPUID_VARIANT_Pos              20U                                            /*!< SCB CPUID: VARIANT Position */

#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */

#define SCB_CPUID_ARCHITECTURE_Pos         16U                                            /*!< SCB CPUID: ARCHITECTURE Position */

#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */

#define SCB_CPUID_PARTNO_Pos                4U                                            /*!< SCB CPUID: PARTNO Position */

#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */

#define SCB_CPUID_REVISION_Pos              0U                                            /*!< SCB CPUID: REVISION Position */

#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */

/* SCB Interrupt Control State Register Definitions */

#define SCB_ICSR_NMIPENDSET_Pos            31U                                            /*!< SCB ICSR: NMIPENDSET Position */

#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */

#define SCB_ICSR_PENDSVSET_Pos             28U                                            /*!< SCB ICSR: PENDSVSET Position */

#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */

#define SCB_ICSR_PENDSVCLR_Pos             27U                                            /*!< SCB ICSR: PENDSVCLR Position */

#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */

#define SCB_ICSR_PENDSTSET_Pos             26U                                            /*!< SCB ICSR: PENDSTSET Position */

#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */

#define SCB_ICSR_PENDSTCLR_Pos             25U                                            /*!< SCB ICSR: PENDSTCLR Position */

#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */

#define SCB_ICSR_ISRPREEMPT_Pos            23U                                            /*!< SCB ICSR: ISRPREEMPT Position */

#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */

#define SCB_ICSR_ISRPENDING_Pos            22U                                            /*!< SCB ICSR: ISRPENDING Position */

#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */

#define SCB_ICSR_VECTPENDING_Pos           12U                                            /*!< SCB ICSR: VECTPENDING Position */

#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */

#define SCB_ICSR_VECTACTIVE_Pos             0U                                            /*!< SCB ICSR: VECTACTIVE Position */

#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */

/* SCB Application Interrupt and Reset Control Register Definitions */

#define SCB_AIRCR_VECTKEY_Pos              16U                                            /*!< SCB AIRCR: VECTKEY Position */

#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */

#define SCB_AIRCR_VECTKEYSTAT_Pos          16U                                            /*!< SCB AIRCR: VECTKEYSTAT Position */

#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */

#define SCB_AIRCR_ENDIANESS_Pos            15U                                            /*!< SCB AIRCR: ENDIANESS Position */

#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */

#define SCB_AIRCR_SYSRESETREQ_Pos           2U                                            /*!< SCB AIRCR: SYSRESETREQ Position */

#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */

#define SCB_AIRCR_VECTCLRACTIVE_Pos         1U                                            /*!< SCB AIRCR: VECTCLRACTIVE Position */

#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */

/* SCB System Control Register Definitions */

#define SCB_SCR_SEVONPEND_Pos               4U                                            /*!< SCB SCR: SEVONPEND Position */

#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */

#define SCB_SCR_SLEEPDEEP_Pos               2U                                            /*!< SCB SCR: SLEEPDEEP Position */

#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */

#define SCB_SCR_SLEEPONEXIT_Pos             1U                                            /*!< SCB SCR: SLEEPONEXIT Position */

#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */

/* SCB Configuration Control Register Definitions */

#define SCB_CCR_STKALIGN_Pos                9U                                            /*!< SCB CCR: STKALIGN Position */

#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */

#define SCB_CCR_UNALIGN_TRP_Pos             3U                                            /*!< SCB CCR: UNALIGN_TRP Position */

#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */

/* SCB System Handler Control and State Register Definitions */

#define SCB_SHCSR_SVCALLPENDED_Pos         15U                                            /*!< SCB SHCSR: SVCALLPENDED Position */

#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */

/*@} end of group CMSIS_SCB */

/**

  \ingroup  CMSIS_core_register

  \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)

  \brief    Type definitions for the System Control and ID Register not in the SCB

  @{

 */

/**

  \brief  Structure type to access the System Control and ID Register not in the SCB.

 */

typedef struct

{

        uint32_t RESERVED0[2U];

  __IOM uint32_t ACTLR;                  /*!< Offset: 0x008 (R/W)  Auxiliary Control Register */

} SCnSCB_Type;

/* Auxiliary Control Register Definitions */

#define SCnSCB_ACTLR_ITCMUAEN_Pos            4U                                        /*!< ACTLR: Instruction TCM Upper Alias Enable Position */

#define SCnSCB_ACTLR_ITCMUAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos)         /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */

#define SCnSCB_ACTLR_ITCMLAEN_Pos            3U                                        /*!< ACTLR: Instruction TCM Lower Alias Enable Position */

#define SCnSCB_ACTLR_ITCMLAEN_Msk           (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos)         /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */

/*@} end of group CMSIS_SCnotSCB */

/**

  \ingroup  CMSIS_core_register

  \defgroup CMSIS_SysTick     System Tick Timer (SysTick)

  \brief    Type definitions for the System Timer Registers.

  @{

 */

/**

  \brief  Structure type to access the System Timer (SysTick).

 */

typedef struct

{

  __IOM uint32_t CTRL;                   /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */

  __IOM uint32_t LOAD;                   /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register */

  __IOM uint32_t VAL;                    /*!< Offset: 0x008 (R/W)  SysTick Current Value Register */

  __IM  uint32_t CALIB;                  /*!< Offset: 0x00C (R/ )  SysTick Calibration Register */

} SysTick_Type;

/* SysTick Control / Status Register Definitions */

#define SysTick_CTRL_COUNTFLAG_Pos         16U                                            /*!< SysTick CTRL: COUNTFLAG Position */

#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */

#define SysTick_CTRL_CLKSOURCE_Pos          2U                                            /*!< SysTick CTRL: CLKSOURCE Position */

#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */

#define SysTick_CTRL_TICKINT_Pos            1U                                            /*!< SysTick CTRL: TICKINT Position */

#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */

#define SysTick_CTRL_ENABLE_Pos             0U                                            /*!< SysTick CTRL: ENABLE Position */

#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */

/* SysTick Reload Register Definitions */

#define SysTick_LOAD_RELOAD_Pos             0U                                            /*!< SysTick LOAD: RELOAD Position */

#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */

/* SysTick Current Register Definitions */

#define SysTick_VAL_CURRENT_Pos             0U                                            /*!< SysTick VAL: CURRENT Position */

#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */

/* SysTick Calibration Register Definitions */

#define SysTick_CALIB_NOREF_Pos            31U                                            /*!< SysTick CALIB: NOREF Position */

#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */

#define SysTick_CALIB_SKEW_Pos             30U                                            /*!< SysTick CALIB: SKEW Position */

#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */

#define SysTick_CALIB_TENMS_Pos             0U                                            /*!< SysTick CALIB: TENMS Position */

#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */

/*@} end of group CMSIS_SysTick */

/**

  \ingroup  CMSIS_core_register

  \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)

  \brief    Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.

            Therefore they are not covered by the Cortex-M1 header file.

  @{

 */

/*@} end of group CMSIS_CoreDebug */

/**

  \ingroup    CMSIS_core_register

  \defgroup   CMSIS_core_bitfield     Core register bit field macros

  \brief      Macros for use with bit field definitions (xxx_Pos, xxx_Msk).

  @{

 */

/**

  \brief   Mask and shift a bit field value for use in a register bit range.

  \param[in] field  Name of the register bit field.

  \param[in] value  Value of the bit field. This parameter is interpreted as an uint32_t type.

  \return           Masked and shifted value.

*/

#define _VAL2FLD(field, value)    (((uint32_t)(value) << field ## _Pos) & field ## _Msk)

/**

  \brief     Mask and shift a register value to extract a bit filed value.

  \param[in] field  Name of the register bit field.

  \param[in] value  Value of register. This parameter is interpreted as an uint32_t type.

  \return           Masked and shifted bit field value.

*/

#define _FLD2VAL(field, value)    (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)

/*@} end of group CMSIS_core_bitfield */

/**

  \ingroup    CMSIS_core_register

  \defgroup   CMSIS_core_base     Core Definitions

  \brief      Definitions for base addresses, unions, and structures.

  @{

 */

/* Memory mapping of Core Hardware */

#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */

#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address */

#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address */

#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */

#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */

#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct */

#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct */

#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct */

/*@} */

/*******************************************************************************

 *                Hardware Abstraction Layer

  Core Function Interface contains:

  - Core NVIC Functions

  - Core SysTick Functions

  - Core Register Access Functions

 ******************************************************************************/

/**

  \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference

*/

/* ##########################   NVIC functions  #################################### */

/**

  \ingroup  CMSIS_Core_FunctionInterface

  \defgroup CMSIS_Core_NVICFunctions NVIC Functions

  \brief    Functions that manage interrupts and exceptions via the NVIC.

  @{

 */

#ifdef CMSIS_NVIC_VIRTUAL

  #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE

    #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"

  #endif

  #include CMSIS_NVIC_VIRTUAL_HEADER_FILE

#else

  #define NVIC_SetPriorityGrouping    __NVIC_SetPriorityGrouping

  #define NVIC_GetPriorityGrouping    __NVIC_GetPriorityGrouping

  #define NVIC_EnableIRQ              __NVIC_EnableIRQ

  #define NVIC_GetEnableIRQ           __NVIC_GetEnableIRQ

  #define NVIC_DisableIRQ             __NVIC_DisableIRQ

  #define NVIC_GetPendingIRQ          __NVIC_GetPendingIRQ

  #define NVIC_SetPendingIRQ          __NVIC_SetPendingIRQ

  #define NVIC_ClearPendingIRQ        __NVIC_ClearPendingIRQ

/*#define NVIC_GetActive              __NVIC_GetActive             not available for Cortex-M1 */

  #define NVIC_SetPriority            __NVIC_SetPriority

  #define NVIC_GetPriority            __NVIC_GetPriority

  #define NVIC_SystemReset            __NVIC_SystemReset

#endif /* CMSIS_NVIC_VIRTUAL */

#ifdef CMSIS_VECTAB_VIRTUAL

  #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE

    #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"

  #endif

  #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE

#else

  #define NVIC_SetVector              __NVIC_SetVector

  #define NVIC_GetVector              __NVIC_GetVector

#endif  /* (CMSIS_VECTAB_VIRTUAL) */

#define NVIC_USER_IRQ_OFFSET          16

/* The following EXC_RETURN values are saved the LR on exception entry */

#define EXC_RETURN_HANDLER         (0xFFFFFFF1UL)     /* return to Handler mode, uses MSP after return                               */

#define EXC_RETURN_THREAD_MSP      (0xFFFFFFF9UL)     /* return to Thread mode, uses MSP after return                                */

#define EXC_RETURN_THREAD_PSP      (0xFFFFFFFDUL)     /* return to Thread mode, uses PSP after return                                */

/* Interrupt Priorities are WORD accessible only under Armv6-M                  */

/* The following MACROS handle generation of the register offset and byte masks */

#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)

#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )

#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )

#define __NVIC_SetPriorityGrouping(X) (void)(X)

#define __NVIC_GetPriorityGrouping()  (0U)

/**

  \brief   Enable Interrupt

  \details Enables a device specific interrupt in the NVIC interrupt controller.

  \param [in]      IRQn  Device specific interrupt number.

  \note    IRQn must not be negative.

 */

__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)

{

  if ((int32_t)(IRQn) >= 0)

  {

    NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));

  }

}

/**

  \brief   Get Interrupt Enable status

  \details Returns a device specific interrupt enable status from the NVIC interrupt controller.

  \param [in]      IRQn  Device specific interrupt number.

  \return             0  Interrupt is not enabled.

  \return             1  Interrupt is enabled.

  \note    IRQn must not be negative.

 */

__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)

{

  if ((int32_t)(IRQn) >= 0)

  {

    return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));

  }

  else

  {

    return(0U);

  }

}

/**

  \brief   Disable Interrupt

  \details Disables a device specific interrupt in the NVIC interrupt controller.

  \param [in]      IRQn  Device specific interrupt number.

  \note    IRQn must not be negative.

 */

__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)

{

  if ((int32_t)(IRQn) >= 0)

  {

    NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));

    __DSB();

    __ISB();

  }

}

/**

  \brief   Get Pending Interrupt

  \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.

  \param [in]      IRQn  Device specific interrupt number.

  \return             0  Interrupt status is not pending.

  \return             1  Interrupt status is pending.

  \note    IRQn must not be negative.

 */

__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)

{

  if ((int32_t)(IRQn) >= 0)

  {

    return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));

  }

  else

  {

    return(0U);

  }

}

/**

  \brief   Set Pending Interrupt

  \details Sets the pending bit of a device specific interrupt in the NVIC pending register.

  \param [in]      IRQn  Device specific interrupt number.

  \note    IRQn must not be negative.

 */

__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)

{

  if ((int32_t)(IRQn) >= 0)

  {

    NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));

  }

}

/**

  \brief   Clear Pending Interrupt

  \details Clears the pending bit of a device specific interrupt in the NVIC pending register.

  \param [in]      IRQn  Device specific interrupt number.

  \note    IRQn must not be negative.

 */

__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)

{

  if ((int32_t)(IRQn) >= 0)

  {

    NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));

  }

}

/**

  \brief   Set Interrupt Priority

  \details Sets the priority of a device specific interrupt or a processor exception.

           The interrupt number can be positive to specify a device specific interrupt,

           or negative to specify a processor exception.

  \param [in]      IRQn  Interrupt number.

  \param [in]  priority  Priority to set.

  \note    The priority cannot be set for every processor exception.

 */

__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)

{

  if ((int32_t)(IRQn) >= 0)

  {

    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |

       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));

  }

  else

  {

    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |

       (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));

  }

}

/**

  \brief   Get Interrupt Priority

  \details Reads the priority of a device specific interrupt or a processor exception.

           The interrupt number can be positive to specify a device specific interrupt,

           or negative to specify a processor exception.

  \param [in]   IRQn  Interrupt number.

  \return             Interrupt Priority.

                      Value is aligned automatically to the implemented priority bits of the microcontroller.

 */

__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)

{

  if ((int32_t)(IRQn) >= 0)

  {

    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));

  }

  else

  {

    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));

  }

}

/**

  \brief   Encode Priority

  \details Encodes the priority for an interrupt with the given priority group,

           preemptive priority value, and subpriority value.

           In case of a conflict between priority grouping and available

           priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.

  \param [in]     PriorityGroup  Used priority group.

  \param [in]   PreemptPriority  Preemptive priority value (starting from 0).

  \param [in]       SubPriority  Subpriority value (starting from 0).

  \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().

 */

__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)

{

  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */

  uint32_t PreemptPriorityBits;

  uint32_t SubPriorityBits;

  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);

  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));

  return (

           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |

           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))

         );

}

/**

  \brief   Decode Priority

  \details Decodes an interrupt priority value with a given priority group to

           preemptive priority value and subpriority value.

           In case of a conflict between priority grouping and available

           priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.

  \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().

  \param [in]     PriorityGroup  Used priority group.

  \param [out] pPreemptPriority  Preemptive priority value (starting from 0).

  \param [out]     pSubPriority  Subpriority value (starting from 0).

 */

__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)

{

  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */

  uint32_t PreemptPriorityBits;

  uint32_t SubPriorityBits;

  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);

  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));

  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);

  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);

}

/**

  \brief   Set Interrupt Vector

  \details Sets an interrupt vector in SRAM based interrupt vector table.

           The interrupt number can be positive to specify a device specific interrupt,

           or negative to specify a processor exception.

           Address 0 must be mapped to SRAM.

  \param [in]   IRQn      Interrupt number

  \param [in]   vector    Address of interrupt handler function

 */

__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)

{

  uint32_t *vectors = (uint32_t *)0x0U;

  vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;

}

/**

  \brief   Get Interrupt Vector

  \details Reads an interrupt vector from interrupt vector table.

           The interrupt number can be positive to specify a device specific interrupt,

           or negative to specify a processor exception.

  \param [in]   IRQn      Interrupt number.

  \return                 Address of interrupt handler function

 */

__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)

{

  uint32_t *vectors = (uint32_t *)0x0U;

  return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];

}

/**

  \brief   System Reset

  \details Initiates a system reset request to reset the MCU.

 */

__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)

{

  __DSB();                                                          /* Ensure all outstanding memory accesses included

                                                                       buffered write are completed before reset */

  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |

                 SCB_AIRCR_SYSRESETREQ_Msk);

  __DSB();                                                          /* Ensure completion of memory access */

  for(;;)                                                           /* wait until reset */

  {

    __NOP();

  }

}

/*@} end of CMSIS_Core_NVICFunctions */

/* ##########################  FPU functions  #################################### */

/**

  \ingroup  CMSIS_Core_FunctionInterface

  \defgroup CMSIS_Core_FpuFunctions FPU Functions