Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 2 | mjames | 1 | # Parameters: |
| 2 | # instance.parameter=value #(type, mode) default = 'def value' : description : [min..max] |
||
| 3 | #---------------------------------------------------------------------------------------------- |
||
| 4 | cpu0.FPU=0 # (bool , init-time) default = '1' : Set whether the model has VFP support |
||
| 5 | cpu0.DSP=1 # (bool , init-time) default = '1' : Set whether the model has the DSP extension |
||
| 6 | cpu0.semihosting-enable=0 # (bool , init-time) default = '1' : Enable semihosting SVC traps. Applications that do not use semihosting must set this parameter to false. |
||
| 7 | cpu0.MPU_S=0x8 # (int , init-time) default = '0x8' : Number of regions in the Secure MPU. If Security Extentions are absent, this is ignored : [0x0..0x10] |
||
| 8 | cpu0.MPU_NS=0x8 # (int , init-time) default = '0x8' : Number of regions in the Non-Secure MPU. If Security Extentions are absent, this is the total number of MPU regions : [0x0..0x10] |
||
| 9 | cpu0.ITM=0 # (bool , init-time) default = '1' : Level of instrumentation trace supported. false : No ITM trace included, true: ITM trace included |
||
| 10 | cpu0.IRQLVL=0x3 # (int , init-time) default = '0x3' : Number of bits of interrupt priority : [0x3..0x8] |
||
| 11 | cpu0.BIGENDINIT=0 # (bool , init-time) default = '0' : Initialize processor to big endian mode |
||
| 12 | cpu0.INITSVTOR=0x00000000 # (int , init-time) default = '0x10000000' : Secure vector-table offset at reset : [0x0..0xFFFFFF80] |
||
| 13 | cpu0.INITNSVTOR=0x0 # (int , init-time) default = '0x0' : Non-Secure vector-table offset at reset : [0x0..0xFFFFFF80] |
||
| 14 | cpu0.SAU=0x0 # (int , init-time) default = '0x4' : Number of SAU regions (0 => no SAU) : [0x0..0x8] |
||
| 15 | cpu0.SAU_CTRL.ENABLE=0 # (bool , init-time) default = '0' : Enable SAU at reset |
||
| 16 | cpu0.SAU_CTRL.ALLNS=0 # (bool , init-time) default = '0' : At reset, the SAU treats entire memory space as NS when the SAU is disabled if this is set |
||
| 17 | cpu0.NUM_IDAU_REGION=0x0 # (int , init-time) default = '0xA' : |
||
| 18 | cpu0.LOCK_SAU=0 # (bool , init-time) default = '0' : Lock down of SAU registers write |
||
| 19 | cpu0.LOCK_S_MPU=0 # (bool , init-time) default = '0' : Lock down of Secure MPU registers write |
||
| 20 | cpu0.LOCK_NS_MPU=0 # (bool , init-time) default = '0' : Lock down of Non-Secure MPU registers write |
||
| 21 | cpu0.CPIF=1 # (bool , init-time) default = '1' : Specifies whether the external coprocessor interface is included |
||
| 22 | cpu0.SECEXT=0 # (bool , init-time) default = '1' : Whether the ARMv8-M Security Extensions are included |
||
| 23 | fvp_mps2.DISABLE_GATING=1 # (bool , init-time) default = '0' : Disable Memory gating logic |
||
| 24 | fvp_mps2.NUM_IDAU_REGION=0x0 # (int , init-time) default = '0xA' : |
||
| 25 | fvp_mps2.SCC_ID.Variant=0x0 # (int , init-time) default = '0x0' : SCC_ID[23:20], X in the FGPA version 'rXpY' : [0x0..0xF] |
||
| 26 | fvp_mps2.SCC_ID.Revision=0x1 # (int , init-time) default = '0x1' : SCC_ID[3:0], Y in the FGPA version 'rXpY' : [0x0..0xF] |
||
| 27 | fvp_mps2.platform_type=0x0 # (int , init-time) default = '0x0' : 0:MPS2 ; 1:IoT Kit ; 2:Castor : [0x0..0x2] |
||
| 28 | fvp_mps2.extra_psram=0 # (bool , init-time) default = '0' : Increases PSRAM to 32Mb |
||
| 29 | fvp_mps2.UART2.out_file="" # (string, init-time) default = '' : Output file to hold data written by the UART (use '-' to send all output to stdout) |
||
| 30 | fvp_mps2.UART2.in_file="" # (string, init-time) default = '' : Input file for data to be read by the UART |
||
| 31 | fvp_mps2.UART2.unbuffered_output=0 # (bool , init-time) default = '0' : Unbuffered output |
||
| 32 | fvp_mps2.UART2.in_file_escape_sequence="##" # (string, init-time) default = '##' : Input file escape sequence |
||
| 33 | fvp_mps2.UART2.shutdown_on_eot=0 # (bool , init-time) default = '0' : Shutdown simulation when a EOT (ASCII 4) char is transmitted (useful for regression tests when semihosting is not available) |
||
| 34 | fvp_mps2.UART2.shutdown_tag="" # (string, run-time ) default = '' : Shutdown simulation when a string is transmitted |
||
| 35 | fvp_mps2.UART1.out_file="" # (string, init-time) default = '' : Output file to hold data written by the UART (use '-' to send all output to stdout) |
||
| 36 | fvp_mps2.UART1.in_file="" # (string, init-time) default = '' : Input file for data to be read by the UART |
||
| 37 | fvp_mps2.UART1.unbuffered_output=0 # (bool , init-time) default = '0' : Unbuffered output |
||
| 38 | fvp_mps2.UART1.in_file_escape_sequence="##" # (string, init-time) default = '##' : Input file escape sequence |
||
| 39 | fvp_mps2.UART1.shutdown_on_eot=0 # (bool , init-time) default = '0' : Shutdown simulation when a EOT (ASCII 4) char is transmitted (useful for regression tests when semihosting is not available) |
||
| 40 | fvp_mps2.UART1.shutdown_tag="" # (string, run-time ) default = '' : Shutdown simulation when a string is transmitted |
||
| 41 | fvp_mps2.mps2_visualisation.rate_limit-enable=1 # (bool , init-time) default = '1' : Rate limit simulation. |
||
| 42 | fvp_mps2.mps2_visualisation.disable-visualisation=0 # (bool , init-time) default = '0' : Enable/disable visualisation |
||
| 43 | fvp_mps2.mps2_visualisation.window_title="CLCD %cpu%" # (string, init-time) default = 'CLCD %cpu%' : Window title (%cpu% is replaced by cpu_name) |
||
| 44 | fvp_mps2.mps2_visualisation.idler.delay_ms=0x32 # (int , init-time) default = '0x32' : Determines the period, in milliseconds of real time, between gui_callback() calls. |
||
| 45 | fvp_mps2.telnetterminal0.mode="telnet" # (string, init-time) default = 'telnet' : Terminal initialisation mode |
||
| 46 | fvp_mps2.telnetterminal0.start_telnet=1 # (bool , init-time) default = '1' : Start telnet if nothing connected |
||
| 47 | fvp_mps2.telnetterminal0.start_port=0x1388 # (int , init-time) default = '0x1388' : Telnet TCP Port Number : [0x0..0xFFFFFFFF] |
||
| 48 | fvp_mps2.telnetterminal0.quiet=0 # (bool , init-time) default = '0' : Avoid output on stdout/stderr |
||
| 49 | fvp_mps2.telnetterminal0.terminal_command="" # (string, init-time) default = '' : Commandline to launch a terminal application and connect to the opened TCP port. Keywords %port and %title will be replaced with the opened port number and component name respectively. An empty string (default behaviour) will launch xterm (Linux) or telnet.exe (Windows) |
||
| 50 | fvp_mps2.telnetterminal1.mode="telnet" # (string, init-time) default = 'telnet' : Terminal initialisation mode |
||
| 51 | fvp_mps2.telnetterminal1.start_telnet=1 # (bool , init-time) default = '1' : Start telnet if nothing connected |
||
| 52 | fvp_mps2.telnetterminal1.start_port=0x1388 # (int , init-time) default = '0x1388' : Telnet TCP Port Number : [0x0..0xFFFFFFFF] |
||
| 53 | fvp_mps2.telnetterminal1.quiet=0 # (bool , init-time) default = '0' : Avoid output on stdout/stderr |
||
| 54 | fvp_mps2.telnetterminal1.terminal_command="" # (string, init-time) default = '' : Commandline to launch a terminal application and connect to the opened TCP port. Keywords %port and %title will be replaced with the opened port number and component name respectively. An empty string (default behaviour) will launch xterm (Linux) or telnet.exe (Windows) |
||
| 55 | fvp_mps2.telnetterminal2.mode="telnet" # (string, init-time) default = 'telnet' : Terminal initialisation mode |
||
| 56 | fvp_mps2.telnetterminal2.start_telnet=1 # (bool , init-time) default = '1' : Start telnet if nothing connected |
||
| 57 | fvp_mps2.telnetterminal2.start_port=0x1388 # (int , init-time) default = '0x1388' : Telnet TCP Port Number : [0x0..0xFFFFFFFF] |
||
| 58 | fvp_mps2.telnetterminal2.quiet=0 # (bool , init-time) default = '0' : Avoid output on stdout/stderr |
||
| 59 | fvp_mps2.telnetterminal2.terminal_command="" # (string, init-time) default = '' : Commandline to launch a terminal application and connect to the opened TCP port. Keywords %port and %title will be replaced with the opened port number and component name respectively. An empty string (default behaviour) will launch xterm (Linux) or telnet.exe (Windows) |
||
| 60 | fvp_mps2.PSRAM_M7.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 61 | fvp_mps2.PSRAM_M7.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 62 | fvp_mps2.PSRAM_M7.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 63 | fvp_mps2.UART0.out_file="" # (string, init-time) default = '' : Output file to hold data written by the UART (use '-' to send all output to stdout) |
||
| 64 | fvp_mps2.UART0.in_file="" # (string, init-time) default = '' : Input file for data to be read by the UART |
||
| 65 | fvp_mps2.UART0.unbuffered_output=0 # (bool , init-time) default = '0' : Unbuffered output |
||
| 66 | fvp_mps2.UART0.in_file_escape_sequence="##" # (string, init-time) default = '##' : Input file escape sequence |
||
| 67 | fvp_mps2.UART0.shutdown_on_eot=0 # (bool , init-time) default = '0' : Shutdown simulation when a EOT (ASCII 4) char is transmitted (useful for regression tests when semihosting is not available) |
||
| 68 | fvp_mps2.UART0.shutdown_tag="" # (string, run-time ) default = '' : Shutdown simulation when a string is transmitted |
||
| 69 | fvp_mps2.cmsdk_watchdog.simhalt=0 # (bool , run-time ) default = '0' : Halt on reset. |
||
| 70 | fvp_mps2.s32k_watchdog.simhalt=0 # (bool , run-time ) default = '0' : Halt on reset. |
||
| 71 | fvp_mps2.secure_watchdog.simhalt=0 # (bool , run-time ) default = '0' : Halt on reset. |
||
| 72 | fvp_mps2.nonsecure_watchdog.simhalt=0 # (bool , run-time ) default = '0' : Halt on reset. |
||
| 73 | fvp_mps2.PSRAM.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 74 | fvp_mps2.PSRAM.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 75 | fvp_mps2.PSRAM.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 76 | fvp_mps2.ssram2.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 77 | fvp_mps2.ssram2.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 78 | fvp_mps2.ssram2.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 79 | fvp_mps2.ssram1.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 80 | fvp_mps2.ssram1.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 81 | fvp_mps2.ssram1.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 82 | fvp_mps2.stub.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 83 | fvp_mps2.iotss_internal_sram0.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 84 | fvp_mps2.iotss_internal_sram0.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 85 | fvp_mps2.iotss_internal_sram0.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 86 | fvp_mps2.iotss_internal_sram1.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 87 | fvp_mps2.iotss_internal_sram1.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 88 | fvp_mps2.iotss_internal_sram1.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 89 | fvp_mps2.iotss_internal_sram2.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 90 | fvp_mps2.iotss_internal_sram2.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 91 | fvp_mps2.iotss_internal_sram2.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 92 | fvp_mps2.iotss_internal_sram3.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size |
||
| 93 | fvp_mps2.iotss_internal_sram3.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 94 | fvp_mps2.iotss_internal_sram3.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern |
||
| 95 | fvp_mps2.sys_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 96 | fvp_mps2.sys_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 97 | fvp_mps2.cpu0core_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 98 | fvp_mps2.cpu0dbg_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 99 | fvp_mps2.cpu1core_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 100 | fvp_mps2.cpu1core_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 101 | fvp_mps2.cpu1dbg_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 102 | fvp_mps2.cpu1dbg_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 103 | fvp_mps2.crypto_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 104 | fvp_mps2.crypto_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 105 | fvp_mps2.cordio_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 106 | fvp_mps2.cordio_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 107 | fvp_mps2.dbg_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 108 | fvp_mps2.dbg_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 109 | fvp_mps2.ram0_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 110 | fvp_mps2.ram0_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 111 | fvp_mps2.ram1_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 112 | fvp_mps2.ram1_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 113 | fvp_mps2.ram2_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 114 | fvp_mps2.ram2_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 115 | fvp_mps2.ram3_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal |
||
| 116 | fvp_mps2.ram3_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision |
||
| 117 | fvp_mps2.smsc_91c111.enabled=0 # (bool , init-time) default = '0' : Host interface connection enabled |
||
| 118 | fvp_mps2.smsc_91c111.mac_address="00:02:f7:ef:5d:a2" # (string, init-time) default = '00:02:f7:ef:5d:a2' : Host/model MAC address |
||
| 119 | fvp_mps2.smsc_91c111.promiscuous=1 # (bool , init-time) default = '1' : Put host into promiscuous mode |
||
| 120 | fvp_mps2.hostbridge.interfaceName="ARM0" # (string, init-time) default = 'ARM0' : Host Interface |
||
| 121 | fvp_mps2.hostbridge.userNetworking=0 # (bool , init-time) default = '0' : Enable user-mode networking |
||
| 122 | fvp_mps2.hostbridge.userNetSubnet="172.20.51.0/24" # (string, init-time) default = '172.20.51.0/24' : Virtual subnet for user-mode networking |
||
| 123 | fvp_mps2.hostbridge.userNetPorts="" # (string, init-time) default = '' : Listening ports to expose in user-mode networking |
||
| 124 | fvp_mps2.secure_control_register_block.FLASH_BLOCK_CFG=0x3 # (int , init-time) default = '0x3' : Flash Block size configuration : [0x0..0x31] |
||
| 125 | fvp_mps2.secure_control_register_block.SRAM_BLOCK_CFG=0x3 # (int , init-time) default = '0x3' : SRAM Block size configuration : [0x0..0x31] |
||
| 126 | fvp_mps2.secure_control_register_block.FLASH_WATERMARK_SUPPORTED=1 # (bool , init-time) default = '1' : Flash Watermark supported |
||
| 127 | fvp_mps2.secure_control_register_block.SRAM_WATERMARK_SUPPORTED=1 # (bool , init-time) default = '1' : SRAM Watermark supported |
||
| 128 | fvp_mps2.exclusive_monitor_psram.enable_component=1 # (bool , init-time) default = '1' : Enable component |
||
| 129 | fvp_mps2.exclusive_monitor_psram.number_of_monitors=0x8 # (int , init-time) default = '0x8' : Number of monitors : [0x1..0xFFFFFFFF] |
||
| 130 | fvp_mps2.exclusive_monitor_psram.log2_granule_size=0x0 # (int , init-time) default = '0x0' : log2 of address granule size : [0x0..0xB] |
||
| 131 | fvp_mps2.exclusive_monitor_psram.monitor_non_excl_stores=0 # (bool , init-time) default = '0' : Monitor non-exclusive stores from the same master |
||
| 132 | fvp_mps2.exclusive_monitor_psram.match_secure_state=1 # (bool , init-time) default = '1' : Treat the secure state like an address bit |
||
| 133 | fvp_mps2.exclusive_monitor_psram.shareability_domain=0x3 # (int , init-time) default = '0x3' : Maximum shareability domain of interest, transactions outside of the domain will pass through un-monitored (0-non-shared, 1-inner, 2-outer, 3-system) : [0x0..0x3] |
||
| 134 | fvp_mps2.exclusive_monitor_psram.apply_access_width_criteria_to_non_excl_stores=1 # (bool , init-time) default = '1' : Apply the given exclusive store width matching criteria to non-exclusive stores |
||
| 135 | fvp_mps2.exclusive_monitor_zbtsram1.enable_component=1 # (bool , init-time) default = '1' : Enable component |
||
| 136 | fvp_mps2.exclusive_monitor_zbtsram1.number_of_monitors=0x8 # (int , init-time) default = '0x8' : Number of monitors : [0x1..0xFFFFFFFF] |
||
| 137 | fvp_mps2.exclusive_monitor_zbtsram1.log2_granule_size=0x0 # (int , init-time) default = '0x0' : log2 of address granule size : [0x0..0xB] |
||
| 138 | fvp_mps2.exclusive_monitor_zbtsram1.monitor_non_excl_stores=0 # (bool , init-time) default = '0' : Monitor non-exclusive stores from the same master |
||
| 139 | fvp_mps2.exclusive_monitor_zbtsram1.match_secure_state=1 # (bool , init-time) default = '1' : Treat the secure state like an address bit |
||
| 140 | fvp_mps2.exclusive_monitor_zbtsram1.shareability_domain=0x3 # (int , init-time) default = '0x3' : Maximum shareability domain of interest, transactions outside of the domain will pass through un-monitored (0-non-shared, 1-inner, 2-outer, 3-system) : [0x0..0x3] |
||
| 141 | fvp_mps2.exclusive_monitor_zbtsram1.apply_access_width_criteria_to_non_excl_stores=1 # (bool , init-time) default = '1' : Apply the given exclusive store width matching criteria to non-exclusive stores |
||
| 142 | fvp_mps2.exclusive_monitor_zbtsram2.enable_component=1 # (bool , init-time) default = '1' : Enable component |
||
| 143 | fvp_mps2.exclusive_monitor_zbtsram2.number_of_monitors=0x8 # (int , init-time) default = '0x8' : Number of monitors : [0x1..0xFFFFFFFF] |
||
| 144 | fvp_mps2.exclusive_monitor_zbtsram2.log2_granule_size=0x0 # (int , init-time) default = '0x0' : log2 of address granule size : [0x0..0xB] |
||
| 145 | fvp_mps2.exclusive_monitor_zbtsram2.monitor_non_excl_stores=0 # (bool , init-time) default = '0' : Monitor non-exclusive stores from the same master |
||
| 146 | fvp_mps2.exclusive_monitor_zbtsram2.match_secure_state=1 # (bool , init-time) default = '1' : Treat the secure state like an address bit |
||
| 147 | fvp_mps2.exclusive_monitor_zbtsram2.shareability_domain=0x3 # (int , init-time) default = '0x3' : Maximum shareability domain of interest, transactions outside of the domain will pass through un-monitored (0-non-shared, 1-inner, 2-outer, 3-system) : [0x0..0x3] |
||
| 148 | fvp_mps2.exclusive_monitor_zbtsram2.apply_access_width_criteria_to_non_excl_stores=1 # (bool , init-time) default = '1' : Apply the given exclusive store width matching criteria to non-exclusive stores |
||
| 149 | fvp_mps2.exclusive_monitor_iotss_internal_sram.enable_component=1 # (bool , init-time) default = '1' : Enable component |
||
| 150 | fvp_mps2.exclusive_monitor_iotss_internal_sram.number_of_monitors=0x8 # (int , init-time) default = '0x8' : Number of monitors : [0x1..0xFFFFFFFF] |
||
| 151 | fvp_mps2.exclusive_monitor_iotss_internal_sram.log2_granule_size=0x0 # (int , init-time) default = '0x0' : log2 of address granule size : [0x0..0xB] |
||
| 152 | fvp_mps2.exclusive_monitor_iotss_internal_sram.monitor_non_excl_stores=0 # (bool , init-time) default = '0' : Monitor non-exclusive stores from the same master |
||
| 153 | fvp_mps2.exclusive_monitor_iotss_internal_sram.match_secure_state=1 # (bool , init-time) default = '1' : Treat the secure state like an address bit |
||
| 154 | fvp_mps2.exclusive_monitor_iotss_internal_sram.shareability_domain=0x3 # (int , init-time) default = '0x3' : Maximum shareability domain of interest, transactions outside of the domain will pass through un-monitored (0-non-shared, 1-inner, 2-outer, 3-system) : [0x0..0x3] |
||
| 155 | fvp_mps2.exclusive_monitor_iotss_internal_sram.apply_access_width_criteria_to_non_excl_stores=1 # (bool , init-time) default = '1' : Apply the given exclusive store width matching criteria to non-exclusive stores |
||
| 156 | fvp_mps2.dma0_securitymodifier.behaviour_ns_to_s=0x0 # (int , init-time) default = '0x0' : Behaviour for NS transactions to S space : 0:block 1:transmit 2:convert to S |
||
| 157 | fvp_mps2.dma0_securitymodifier.behaviour_s_to_ns=0x0 # (int , init-time) default = '0x0' : Behaviour for S transactions to NS space : 0:block 1:transmit 2:convert to NS |
||
| 158 | fvp_mps2.dma1_securitymodifier.behaviour_ns_to_s=0x0 # (int , init-time) default = '0x0' : Behaviour for NS transactions to S space : 0:block 1:transmit 2:convert to S |
||
| 159 | fvp_mps2.dma1_securitymodifier.behaviour_s_to_ns=0x0 # (int , init-time) default = '0x0' : Behaviour for S transactions to NS space : 0:block 1:transmit 2:convert to NS |
||
| 160 | fvp_mps2.dma2_securitymodifier.behaviour_ns_to_s=0x0 # (int , init-time) default = '0x0' : Behaviour for NS transactions to S space : 0:block 1:transmit 2:convert to S |
||
| 161 | fvp_mps2.dma2_securitymodifier.behaviour_s_to_ns=0x0 # (int , init-time) default = '0x0' : Behaviour for S transactions to NS space : 0:block 1:transmit 2:convert to NS |
||
| 162 | fvp_mps2.dma3_securitymodifier.behaviour_ns_to_s=0x0 # (int , init-time) default = '0x0' : Behaviour for NS transactions to S space : 0:block 1:transmit 2:convert to S |
||
| 163 | fvp_mps2.dma3_securitymodifier.behaviour_s_to_ns=0x0 # (int , init-time) default = '0x0' : Behaviour for S transactions to NS space : 0:block 1:transmit 2:convert to NS |
||
| 164 | fvp_mps2.dma0.fifo_size=0x10 # (int , init-time) default = '0x10' : Channel FIFO size in bytes |
||
| 165 | fvp_mps2.dma0.max_transfer=0x100 # (int , init-time) default = '0x100' : Largest atomic transfer |
||
| 166 | fvp_mps2.dma0.generate_clear=0 # (bool , init-time) default = '0' : Generate clear response |
||
| 167 | fvp_mps2.dma0.activate_delay=0x0 # (int , init-time) default = '0x0' : request delay |
||
| 168 | fvp_mps2.dma1.fifo_size=0x10 # (int , init-time) default = '0x10' : Channel FIFO size in bytes |
||
| 169 | fvp_mps2.dma1.max_transfer=0x100 # (int , init-time) default = '0x100' : Largest atomic transfer |
||
| 170 | fvp_mps2.dma1.generate_clear=0 # (bool , init-time) default = '0' : Generate clear response |
||
| 171 | fvp_mps2.dma1.activate_delay=0x0 # (int , init-time) default = '0x0' : request delay |
||
| 172 | fvp_mps2.dma2.fifo_size=0x10 # (int , init-time) default = '0x10' : Channel FIFO size in bytes |
||
| 173 | fvp_mps2.dma2.max_transfer=0x100 # (int , init-time) default = '0x100' : Largest atomic transfer |
||
| 174 | fvp_mps2.dma2.generate_clear=0 # (bool , init-time) default = '0' : Generate clear response |
||
| 175 | fvp_mps2.dma2.activate_delay=0x0 # (int , init-time) default = '0x0' : request delay |
||
| 176 | fvp_mps2.dma3.fifo_size=0x10 # (int , init-time) default = '0x10' : Channel FIFO size in bytes |
||
| 177 | fvp_mps2.dma3.max_transfer=0x100 # (int , init-time) default = '0x100' : Largest atomic transfer |
||
| 178 | fvp_mps2.dma3.generate_clear=0 # (bool , init-time) default = '0' : Generate clear response |
||
| 179 | fvp_mps2.dma3.activate_delay=0x0 # (int , init-time) default = '0x0' : request delay |
||
| 180 | fvp_mps2.iotss_systemcontrol.cpu0wait=0 # (bool , init-time) default = '0' : Whether to hold cpu1 in reset at boot |
||
| 181 | fvp_mps2.iotss_systemcontrol.cpu1wait=1 # (bool , init-time) default = '1' : Whether to hold cpu1 in reset at boot |
||
| 182 | fvp_mps2.iotss_cpuidentity.debugger_master_id=0xFFFFFFFF # (int , init-time) default = '0xFFFFFFFF' : : [0x0..0xFFFFFFFF] |
||
| 183 | #---------------------------------------------------------------------------------------------- |