WebSVN – dashGPS – Blame – /branches/dashGPS-bmp/build/bme280.lst

Rev	Author	Line No.	Line
19	mjames	1	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 1
		2
		3
		4	1 .cpu cortex-m3
		5	2 .eabi_attribute 20, 1
		6	3 .eabi_attribute 21, 1
		7	4 .eabi_attribute 23, 3
		8	5 .eabi_attribute 24, 1
		9	6 .eabi_attribute 25, 1
		10	7 .eabi_attribute 26, 1
		11	8 .eabi_attribute 30, 1
		12	9 .eabi_attribute 34, 1
		13	10 .eabi_attribute 18, 4
		14	11 .file "bme280.c"
		15	12 .text
		16	13 .Ltext0:
		17	14 .cfi_sections .debug_frame
		18	15 .section .text.fill_filter_settings,"ax",%progbits
		19	16 .align 1
		20	17 .arch armv7-m
		21	18 .syntax unified
		22	19 .thumb
		23	20 .thumb_func
		24	21 .fpu softvfp
		25	23 fill_filter_settings:
		26	24 .LVL0:
		27	25 .LFB16:
		28	26 .file 1 "../libBME280/src/bme280.c"
		29	1:../libBME280/src/bme280.c ** /
		30	2:../libBME280/src/bme280.c **** * Copyright (c) 2020 Bosch Sensortec GmbH. All rights reserved.
		31	3:../libBME280/src/bme280.c **** *
		32	4:../libBME280/src/bme280.c **** * BSD-3-Clause
		33	5:../libBME280/src/bme280.c **** *
		34	6:../libBME280/src/bme280.c **** * Redistribution and use in source and binary forms, with or without
		35	7:../libBME280/src/bme280.c **** * modification, are permitted provided that the following conditions are met:
		36	8:../libBME280/src/bme280.c **** *
		37	9:../libBME280/src/bme280.c **** * 1. Redistributions of source code must retain the above copyright
		38	10:../libBME280/src/bme280.c **** * notice, this list of conditions and the following disclaimer.
		39	11:../libBME280/src/bme280.c **** *
		40	12:../libBME280/src/bme280.c **** * 2. Redistributions in binary form must reproduce the above copyright
		41	13:../libBME280/src/bme280.c **** * notice, this list of conditions and the following disclaimer in the
		42	14:../libBME280/src/bme280.c **** * documentation and/or other materials provided with the distribution.
		43	15:../libBME280/src/bme280.c **** *
		44	16:../libBME280/src/bme280.c **** * 3. Neither the name of the copyright holder nor the names of its
		45	17:../libBME280/src/bme280.c **** * contributors may be used to endorse or promote products derived from
		46	18:../libBME280/src/bme280.c **** * this software without specific prior written permission.
		47	19:../libBME280/src/bme280.c **** *
		48	20:../libBME280/src/bme280.c **** * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
		49	21:../libBME280/src/bme280.c **** * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
		50	22:../libBME280/src/bme280.c **** * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
		51	23:../libBME280/src/bme280.c **** * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
		52	24:../libBME280/src/bme280.c **** * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
		53	25:../libBME280/src/bme280.c **** * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
		54	26:../libBME280/src/bme280.c **** * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
		55	27:../libBME280/src/bme280.c **** * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
		56	28:../libBME280/src/bme280.c **** * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
		57	29:../libBME280/src/bme280.c **** * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
		58	30:../libBME280/src/bme280.c **** * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
		59	31:../libBME280/src/bme280.c **** * POSSIBILITY OF SUCH DAMAGE.
		60	32:../libBME280/src/bme280.c **** *
		61	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 2
		62
		63
		64	33:../libBME280/src/bme280.c **** * @file bme280.c
		65	34:../libBME280/src/bme280.c **** * @date 2020-03-28
		66	35:../libBME280/src/bme280.c **** * @version v3.5.0
		67	36:../libBME280/src/bme280.c **** *
		68	37:../libBME280/src/bme280.c **** */
		69	38:../libBME280/src/bme280.c ****
		70	39:../libBME280/src/bme280.c **** /*! @file bme280.c
		71	40:../libBME280/src/bme280.c **** * @brief Sensor driver for BME280 sensor
		72	41:../libBME280/src/bme280.c **** */
		73	42:../libBME280/src/bme280.c **** #include "libBME280/bme280.h"
		74	43:../libBME280/src/bme280.c ****
		75	44:../libBME280/src/bme280.c ** /\name Internal macros */
		76	45:../libBME280/src/bme280.c **** /* To identify osr settings selected by user */
		77	46:../libBME280/src/bme280.c **** #define OVERSAMPLING_SETTINGS UINT8_C(0x07)
		78	47:../libBME280/src/bme280.c ****
		79	48:../libBME280/src/bme280.c **** /* To identify filter and standby settings selected by user */
		80	49:../libBME280/src/bme280.c **** #define FILTER_STANDBY_SETTINGS UINT8_C(0x18)
		81	50:../libBME280/src/bme280.c ****
		82	51:../libBME280/src/bme280.c **** /*!
		83	52:../libBME280/src/bme280.c **** * @brief This internal API puts the device to sleep mode.
		84	53:../libBME280/src/bme280.c **** *
		85	54:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		86	55:../libBME280/src/bme280.c **** *
		87	56:../libBME280/src/bme280.c **** * @return Result of API execution status.
		88	57:../libBME280/src/bme280.c **** *
		89	58:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		90	59:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		91	60:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		92	61:../libBME280/src/bme280.c **** *
		93	62:../libBME280/src/bme280.c **** */
		94	63:../libBME280/src/bme280.c **** static int8_t put_device_to_sleep(struct bme280_dev *dev);
		95	64:../libBME280/src/bme280.c ****
		96	65:../libBME280/src/bme280.c **** /*!
		97	66:../libBME280/src/bme280.c **** * @brief This internal API writes the power mode in the sensor.
		98	67:../libBME280/src/bme280.c **** *
		99	68:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		100	69:../libBME280/src/bme280.c **** * @param[in] sensor_mode : Variable which contains the power mode to be set.
		101	70:../libBME280/src/bme280.c **** *
		102	71:../libBME280/src/bme280.c **** * @return Result of API execution status.
		103	72:../libBME280/src/bme280.c **** *
		104	73:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		105	74:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		106	75:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		107	76:../libBME280/src/bme280.c **** *
		108	77:../libBME280/src/bme280.c **** */
		109	78:../libBME280/src/bme280.c **** static int8_t write_power_mode(uint8_t sensor_mode, struct bme280_dev *dev);
		110	79:../libBME280/src/bme280.c ****
		111	80:../libBME280/src/bme280.c **** /*!
		112	81:../libBME280/src/bme280.c **** * @brief This internal API is used to validate the device pointer for
		113	82:../libBME280/src/bme280.c **** * null conditions.
		114	83:../libBME280/src/bme280.c **** *
		115	84:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		116	85:../libBME280/src/bme280.c **** *
		117	86:../libBME280/src/bme280.c **** * @return Result of API execution status
		118	87:../libBME280/src/bme280.c **** *
		119	88:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		120	89:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		121	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 3
		122
		123
		124	90:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		125	91:../libBME280/src/bme280.c **** *
		126	92:../libBME280/src/bme280.c **** */
		127	93:../libBME280/src/bme280.c **** static int8_t null_ptr_check(const struct bme280_dev *dev);
		128	94:../libBME280/src/bme280.c ****
		129	95:../libBME280/src/bme280.c **** /*!
		130	96:../libBME280/src/bme280.c **** * @brief This internal API interleaves the register address between the
		131	97:../libBME280/src/bme280.c **** * register data buffer for burst write operation.
		132	98:../libBME280/src/bme280.c **** *
		133	99:../libBME280/src/bme280.c **** * @param[in] reg_addr : Contains the register address array.
		134	100:../libBME280/src/bme280.c **** * @param[out] temp_buff : Contains the temporary buffer to store the
		135	101:../libBME280/src/bme280.c **** * register data and register address.
		136	102:../libBME280/src/bme280.c **** * @param[in] reg_data : Contains the register data to be written in the
		137	103:../libBME280/src/bme280.c **** * temporary buffer.
		138	104:../libBME280/src/bme280.c **** * @param[in] len : No of bytes of data to be written for burst write.
		139	105:../libBME280/src/bme280.c **** *
		140	106:../libBME280/src/bme280.c **** */
		141	107:../libBME280/src/bme280.c **** static void interleave_reg_addr(const uint8_t reg_addr, uint8_t temp_buff, const uint8_t *reg_dat
		142	108:../libBME280/src/bme280.c ****
		143	109:../libBME280/src/bme280.c **** /*!
		144	110:../libBME280/src/bme280.c **** * @brief This internal API reads the calibration data from the sensor, parse
		145	111:../libBME280/src/bme280.c **** * it and store in the device structure.
		146	112:../libBME280/src/bme280.c **** *
		147	113:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		148	114:../libBME280/src/bme280.c **** *
		149	115:../libBME280/src/bme280.c **** * @return Result of API execution status
		150	116:../libBME280/src/bme280.c **** *
		151	117:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		152	118:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		153	119:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		154	120:../libBME280/src/bme280.c **** *
		155	121:../libBME280/src/bme280.c **** */
		156	122:../libBME280/src/bme280.c **** static int8_t get_calib_data(struct bme280_dev *dev);
		157	123:../libBME280/src/bme280.c ****
		158	124:../libBME280/src/bme280.c **** /*!
		159	125:../libBME280/src/bme280.c **** * @brief This internal API is used to parse the temperature and
		160	126:../libBME280/src/bme280.c **** * pressure calibration data and store it in the device structure.
		161	127:../libBME280/src/bme280.c **** *
		162	128:../libBME280/src/bme280.c **** * @param[out] dev : Structure instance of bme280_dev to store the calib data.
		163	129:../libBME280/src/bme280.c **** * @param[in] reg_data : Contains the calibration data to be parsed.
		164	130:../libBME280/src/bme280.c **** *
		165	131:../libBME280/src/bme280.c **** */
		166	132:../libBME280/src/bme280.c **** static void parse_temp_press_calib_data(const uint8_t reg_data, struct bme280_dev dev);
		167	133:../libBME280/src/bme280.c ****
		168	134:../libBME280/src/bme280.c **** /*!
		169	135:../libBME280/src/bme280.c **** * @brief This internal API is used to parse the humidity calibration data
		170	136:../libBME280/src/bme280.c **** * and store it in device structure.
		171	137:../libBME280/src/bme280.c **** *
		172	138:../libBME280/src/bme280.c **** * @param[out] dev : Structure instance of bme280_dev to store the calib data.
		173	139:../libBME280/src/bme280.c **** * @param[in] reg_data : Contains calibration data to be parsed.
		174	140:../libBME280/src/bme280.c **** *
		175	141:../libBME280/src/bme280.c **** */
		176	142:../libBME280/src/bme280.c **** static void parse_humidity_calib_data(const uint8_t reg_data, struct bme280_dev dev);
		177	143:../libBME280/src/bme280.c ****
		178	144:../libBME280/src/bme280.c **** #ifdef BME280_FLOAT_ENABLE
		179	145:../libBME280/src/bme280.c ****
		180	146:../libBME280/src/bme280.c **** /*!
		181	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 4
		182
		183
		184	147:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw pressure data and
		185	148:../libBME280/src/bme280.c **** * return the compensated pressure data in double data type.
		186	149:../libBME280/src/bme280.c **** *
		187	150:../libBME280/src/bme280.c **** * @param[in] uncomp_data : Contains the uncompensated pressure data.
		188	151:../libBME280/src/bme280.c **** * @param[in] calib_data : Pointer to the calibration data structure.
		189	152:../libBME280/src/bme280.c **** *
		190	153:../libBME280/src/bme280.c **** * @return Compensated pressure data in double.
		191	154:../libBME280/src/bme280.c **** *
		192	155:../libBME280/src/bme280.c **** */
		193	156:../libBME280/src/bme280.c **** static double compensate_pressure(const struct bme280_uncomp_data *uncomp_data,
		194	157:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data);
		195	158:../libBME280/src/bme280.c ****
		196	159:../libBME280/src/bme280.c **** /*!
		197	160:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw humidity data and
		198	161:../libBME280/src/bme280.c **** * return the compensated humidity data in double data type.
		199	162:../libBME280/src/bme280.c **** *
		200	163:../libBME280/src/bme280.c **** * @param[in] uncomp_data : Contains the uncompensated humidity data.
		201	164:../libBME280/src/bme280.c **** * @param[in] calib_data : Pointer to the calibration data structure.
		202	165:../libBME280/src/bme280.c **** *
		203	166:../libBME280/src/bme280.c **** * @return Compensated humidity data in double.
		204	167:../libBME280/src/bme280.c **** *
		205	168:../libBME280/src/bme280.c **** */
		206	169:../libBME280/src/bme280.c **** static double compensate_humidity(const struct bme280_uncomp_data *uncomp_data,
		207	170:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data);
		208	171:../libBME280/src/bme280.c ****
		209	172:../libBME280/src/bme280.c **** /*!
		210	173:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw temperature data and
		211	174:../libBME280/src/bme280.c **** * return the compensated temperature data in double data type.
		212	175:../libBME280/src/bme280.c **** *
		213	176:../libBME280/src/bme280.c **** * @param[in] uncomp_data : Contains the uncompensated temperature data.
		214	177:../libBME280/src/bme280.c **** * @param[in] calib_data : Pointer to calibration data structure.
		215	178:../libBME280/src/bme280.c **** *
		216	179:../libBME280/src/bme280.c **** * @return Compensated temperature data in double.
		217	180:../libBME280/src/bme280.c **** *
		218	181:../libBME280/src/bme280.c **** */
		219	182:../libBME280/src/bme280.c **** static double compensate_temperature(const struct bme280_uncomp_data *uncomp_data,
		220	183:../libBME280/src/bme280.c **** struct bme280_calib_data *calib_data);
		221	184:../libBME280/src/bme280.c ****
		222	185:../libBME280/src/bme280.c **** #else
		223	186:../libBME280/src/bme280.c ****
		224	187:../libBME280/src/bme280.c **** /*!
		225	188:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw temperature data and
		226	189:../libBME280/src/bme280.c **** * return the compensated temperature data in integer data type.
		227	190:../libBME280/src/bme280.c **** *
		228	191:../libBME280/src/bme280.c **** * @param[in] uncomp_data : Contains the uncompensated temperature data.
		229	192:../libBME280/src/bme280.c **** * @param[in] calib_data : Pointer to calibration data structure.
		230	193:../libBME280/src/bme280.c **** *
		231	194:../libBME280/src/bme280.c **** * @return Compensated temperature data in integer.
		232	195:../libBME280/src/bme280.c **** *
		233	196:../libBME280/src/bme280.c **** */
		234	197:../libBME280/src/bme280.c **** static int32_t compensate_temperature(const struct bme280_uncomp_data *uncomp_data,
		235	198:../libBME280/src/bme280.c **** struct bme280_calib_data *calib_data);
		236	199:../libBME280/src/bme280.c ****
		237	200:../libBME280/src/bme280.c **** /*!
		238	201:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw pressure data and
		239	202:../libBME280/src/bme280.c **** * return the compensated pressure data in integer data type.
		240	203:../libBME280/src/bme280.c **** *
		241	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 5
		242
		243
		244	204:../libBME280/src/bme280.c **** * @param[in] uncomp_data : Contains the uncompensated pressure data.
		245	205:../libBME280/src/bme280.c **** * @param[in] calib_data : Pointer to the calibration data structure.
		246	206:../libBME280/src/bme280.c **** *
		247	207:../libBME280/src/bme280.c **** * @return Compensated pressure data in integer.
		248	208:../libBME280/src/bme280.c **** *
		249	209:../libBME280/src/bme280.c **** */
		250	210:../libBME280/src/bme280.c **** static uint32_t compensate_pressure(const struct bme280_uncomp_data *uncomp_data,
		251	211:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data);
		252	212:../libBME280/src/bme280.c ****
		253	213:../libBME280/src/bme280.c **** /*!
		254	214:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw humidity data and
		255	215:../libBME280/src/bme280.c **** * return the compensated humidity data in integer data type.
		256	216:../libBME280/src/bme280.c **** *
		257	217:../libBME280/src/bme280.c **** * @param[in] uncomp_data : Contains the uncompensated humidity data.
		258	218:../libBME280/src/bme280.c **** * @param[in] calib_data : Pointer to the calibration data structure.
		259	219:../libBME280/src/bme280.c **** *
		260	220:../libBME280/src/bme280.c **** * @return Compensated humidity data in integer.
		261	221:../libBME280/src/bme280.c **** *
		262	222:../libBME280/src/bme280.c **** */
		263	223:../libBME280/src/bme280.c **** static uint32_t compensate_humidity(const struct bme280_uncomp_data *uncomp_data,
		264	224:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data);
		265	225:../libBME280/src/bme280.c ****
		266	226:../libBME280/src/bme280.c **** #endif
		267	227:../libBME280/src/bme280.c ****
		268	228:../libBME280/src/bme280.c **** /*!
		269	229:../libBME280/src/bme280.c **** * @brief This internal API is used to identify the settings which the user
		270	230:../libBME280/src/bme280.c **** * wants to modify in the sensor.
		271	231:../libBME280/src/bme280.c **** *
		272	232:../libBME280/src/bme280.c **** * @param[in] sub_settings : Contains the settings subset to identify particular
		273	233:../libBME280/src/bme280.c **** * group of settings which the user is interested to change.
		274	234:../libBME280/src/bme280.c **** * @param[in] desired_settings : Contains the user specified settings.
		275	235:../libBME280/src/bme280.c **** *
		276	236:../libBME280/src/bme280.c **** * @return Indicates whether user is interested to modify the settings which
		277	237:../libBME280/src/bme280.c **** * are related to sub_settings.
		278	238:../libBME280/src/bme280.c **** * @return True -> User wants to modify this group of settings
		279	239:../libBME280/src/bme280.c **** * @return False -> User does not want to modify this group of settings
		280	240:../libBME280/src/bme280.c **** *
		281	241:../libBME280/src/bme280.c **** */
		282	242:../libBME280/src/bme280.c **** static uint8_t are_settings_changed(uint8_t sub_settings, uint8_t desired_settings);
		283	243:../libBME280/src/bme280.c ****
		284	244:../libBME280/src/bme280.c **** /*!
		285	245:../libBME280/src/bme280.c **** * @brief This API sets the humidity over sampling settings of the sensor.
		286	246:../libBME280/src/bme280.c **** *
		287	247:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		288	248:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		289	249:../libBME280/src/bme280.c **** * be set in the sensor.
		290	250:../libBME280/src/bme280.c **** *
		291	251:../libBME280/src/bme280.c **** * @return Result of API execution status
		292	252:../libBME280/src/bme280.c **** *
		293	253:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		294	254:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		295	255:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		296	256:../libBME280/src/bme280.c **** *
		297	257:../libBME280/src/bme280.c **** */
		298	258:../libBME280/src/bme280.c **** static int8_t set_osr_humidity_settings(const struct bme280_settings settings, struct bme280_dev
		299	259:../libBME280/src/bme280.c ****
		300	260:../libBME280/src/bme280.c **** /*!
		301	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 6
		302
		303
		304	261:../libBME280/src/bme280.c **** * @brief This internal API sets the oversampling settings for pressure,
		305	262:../libBME280/src/bme280.c **** * temperature and humidity in the sensor.
		306	263:../libBME280/src/bme280.c **** *
		307	264:../libBME280/src/bme280.c **** * @param[in] desired_settings : Variable used to select the settings which
		308	265:../libBME280/src/bme280.c **** * are to be set.
		309	266:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		310	267:../libBME280/src/bme280.c **** * be set in the sensor.
		311	268:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		312	269:../libBME280/src/bme280.c **** *
		313	270:../libBME280/src/bme280.c **** * @return Result of API execution status
		314	271:../libBME280/src/bme280.c **** *
		315	272:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		316	273:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		317	274:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		318	275:../libBME280/src/bme280.c **** *
		319	276:../libBME280/src/bme280.c **** */
		320	277:../libBME280/src/bme280.c **** static int8_t set_osr_settings(uint8_t desired_settings, const struct bme280_settings *settings,
		321	278:../libBME280/src/bme280.c **** struct bme280_dev *dev);
		322	279:../libBME280/src/bme280.c ****
		323	280:../libBME280/src/bme280.c **** /*!
		324	281:../libBME280/src/bme280.c **** * @brief This API sets the pressure and/or temperature oversampling settings
		325	282:../libBME280/src/bme280.c **** * in the sensor according to the settings selected by the user.
		326	283:../libBME280/src/bme280.c **** *
		327	284:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		328	285:../libBME280/src/bme280.c **** * @param[in] desired_settings: variable to select the pressure and/or
		329	286:../libBME280/src/bme280.c **** * temperature oversampling settings.
		330	287:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		331	288:../libBME280/src/bme280.c **** * be set in the sensor.
		332	289:../libBME280/src/bme280.c **** *
		333	290:../libBME280/src/bme280.c **** * @return Result of API execution status
		334	291:../libBME280/src/bme280.c **** *
		335	292:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		336	293:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		337	294:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		338	295:../libBME280/src/bme280.c **** *
		339	296:../libBME280/src/bme280.c **** */
		340	297:../libBME280/src/bme280.c **** static int8_t set_osr_press_temp_settings(uint8_t desired_settings,
		341	298:../libBME280/src/bme280.c **** const struct bme280_settings *settings,
		342	299:../libBME280/src/bme280.c **** struct bme280_dev *dev);
		343	300:../libBME280/src/bme280.c ****
		344	301:../libBME280/src/bme280.c **** /*!
		345	302:../libBME280/src/bme280.c **** * @brief This internal API fills the pressure oversampling settings provided by
		346	303:../libBME280/src/bme280.c **** * the user in the data buffer so as to write in the sensor.
		347	304:../libBME280/src/bme280.c **** *
		348	305:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		349	306:../libBME280/src/bme280.c **** * be set in the sensor.
		350	307:../libBME280/src/bme280.c **** * @param[out] reg_data : Variable which is filled according to the pressure
		351	308:../libBME280/src/bme280.c **** * oversampling data provided by the user.
		352	309:../libBME280/src/bme280.c **** *
		353	310:../libBME280/src/bme280.c **** */
		354	311:../libBME280/src/bme280.c **** static void fill_osr_press_settings(uint8_t reg_data, const struct bme280_settings settings);
		355	312:../libBME280/src/bme280.c ****
		356	313:../libBME280/src/bme280.c **** /*!
		357	314:../libBME280/src/bme280.c **** * @brief This internal API fills the temperature oversampling settings provided
		358	315:../libBME280/src/bme280.c **** * by the user in the data buffer so as to write in the sensor.
		359	316:../libBME280/src/bme280.c **** *
		360	317:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		361	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 7
		362
		363
		364	318:../libBME280/src/bme280.c **** * be set in the sensor.
		365	319:../libBME280/src/bme280.c **** * @param[out] reg_data : Variable which is filled according to the temperature
		366	320:../libBME280/src/bme280.c **** * oversampling data provided by the user.
		367	321:../libBME280/src/bme280.c **** *
		368	322:../libBME280/src/bme280.c **** */
		369	323:../libBME280/src/bme280.c **** static void fill_osr_temp_settings(uint8_t reg_data, const struct bme280_settings settings);
		370	324:../libBME280/src/bme280.c ****
		371	325:../libBME280/src/bme280.c **** /*!
		372	326:../libBME280/src/bme280.c **** * @brief This internal API sets the filter and/or standby duration settings
		373	327:../libBME280/src/bme280.c **** * in the sensor according to the settings selected by the user.
		374	328:../libBME280/src/bme280.c **** *
		375	329:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		376	330:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		377	331:../libBME280/src/bme280.c **** * be set in the sensor.
		378	332:../libBME280/src/bme280.c **** * @param[in] settings : Structure instance of bme280_settings.
		379	333:../libBME280/src/bme280.c **** *
		380	334:../libBME280/src/bme280.c **** * @return Result of API execution status
		381	335:../libBME280/src/bme280.c **** *
		382	336:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		383	337:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		384	338:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		385	339:../libBME280/src/bme280.c **** *
		386	340:../libBME280/src/bme280.c **** */
		387	341:../libBME280/src/bme280.c **** static int8_t set_filter_standby_settings(uint8_t desired_settings,
		388	342:../libBME280/src/bme280.c **** const struct bme280_settings *settings,
		389	343:../libBME280/src/bme280.c **** struct bme280_dev *dev);
		390	344:../libBME280/src/bme280.c ****
		391	345:../libBME280/src/bme280.c **** /*!
		392	346:../libBME280/src/bme280.c **** * @brief This internal API fills the filter settings provided by the user
		393	347:../libBME280/src/bme280.c **** * in the data buffer so as to write in the sensor.
		394	348:../libBME280/src/bme280.c **** *
		395	349:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		396	350:../libBME280/src/bme280.c **** * be set in the sensor.
		397	351:../libBME280/src/bme280.c **** * @param[out] reg_data : Variable which is filled according to the filter
		398	352:../libBME280/src/bme280.c **** * settings data provided by the user.
		399	353:../libBME280/src/bme280.c **** *
		400	354:../libBME280/src/bme280.c **** */
		401	355:../libBME280/src/bme280.c **** static void fill_filter_settings(uint8_t reg_data, const struct bme280_settings settings);
		402	356:../libBME280/src/bme280.c ****
		403	357:../libBME280/src/bme280.c **** /*!
		404	358:../libBME280/src/bme280.c **** * @brief This internal API fills the standby duration settings provided by the
		405	359:../libBME280/src/bme280.c **** * user in the data buffer so as to write in the sensor.
		406	360:../libBME280/src/bme280.c **** *
		407	361:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		408	362:../libBME280/src/bme280.c **** * be set in the sensor.
		409	363:../libBME280/src/bme280.c **** * @param[out] reg_data : Variable which is filled according to the standby
		410	364:../libBME280/src/bme280.c **** * settings data provided by the user.
		411	365:../libBME280/src/bme280.c **** *
		412	366:../libBME280/src/bme280.c **** */
		413	367:../libBME280/src/bme280.c **** static void fill_standby_settings(uint8_t reg_data, const struct bme280_settings settings);
		414	368:../libBME280/src/bme280.c ****
		415	369:../libBME280/src/bme280.c **** /*!
		416	370:../libBME280/src/bme280.c **** * @brief This internal API parse the oversampling(pressure, temperature
		417	371:../libBME280/src/bme280.c **** * and humidity), filter and standby duration settings and store in the
		418	372:../libBME280/src/bme280.c **** * device structure.
		419	373:../libBME280/src/bme280.c **** *
		420	374:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		421	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 8
		422
		423
		424	375:../libBME280/src/bme280.c **** * be get in the sensor.
		425	376:../libBME280/src/bme280.c **** * @param[in] reg_data : Register data to be parsed.
		426	377:../libBME280/src/bme280.c **** *
		427	378:../libBME280/src/bme280.c **** */
		428	379:../libBME280/src/bme280.c **** static void parse_device_settings(const uint8_t reg_data, struct bme280_settings settings);
		429	380:../libBME280/src/bme280.c ****
		430	381:../libBME280/src/bme280.c **** /*!
		431	382:../libBME280/src/bme280.c **** * @brief This internal API reloads the already existing device settings in the
		432	383:../libBME280/src/bme280.c **** * sensor after soft reset.
		433	384:../libBME280/src/bme280.c **** *
		434	385:../libBME280/src/bme280.c **** * @param[in] dev : Structure instance of bme280_dev.
		435	386:../libBME280/src/bme280.c **** * @param[in] settings : Pointer variable which contains the settings to
		436	387:../libBME280/src/bme280.c **** * be set in the sensor.
		437	388:../libBME280/src/bme280.c **** *
		438	389:../libBME280/src/bme280.c **** * @return Result of API execution status
		439	390:../libBME280/src/bme280.c **** *
		440	391:../libBME280/src/bme280.c **** * @retval 0 -> Success.
		441	392:../libBME280/src/bme280.c **** * @retval > 0 -> Warning.
		442	393:../libBME280/src/bme280.c **** * @retval < 0 -> Fail.
		443	394:../libBME280/src/bme280.c **** *
		444	395:../libBME280/src/bme280.c **** */
		445	396:../libBME280/src/bme280.c **** static int8_t reload_device_settings(const struct bme280_settings settings, struct bme280_dev dev
		446	397:../libBME280/src/bme280.c ****
		447	398:../libBME280/src/bme280.c ** /************** Global Function Definitions *****************************/
		448	399:../libBME280/src/bme280.c ****
		449	400:../libBME280/src/bme280.c **** /*!
		450	401:../libBME280/src/bme280.c **** * @brief This API is the entry point.
		451	402:../libBME280/src/bme280.c **** * It reads the chip-id and calibration data from the sensor.
		452	403:../libBME280/src/bme280.c **** */
		453	404:../libBME280/src/bme280.c **** int8_t bme280_init(struct bme280_dev *dev)
		454	405:../libBME280/src/bme280.c **** {
		455	406:../libBME280/src/bme280.c **** int8_t rslt;
		456	407:../libBME280/src/bme280.c ****
		457	408:../libBME280/src/bme280.c **** /* chip id read try count */
		458	409:../libBME280/src/bme280.c **** uint8_t try_count = 5;
		459	410:../libBME280/src/bme280.c **** uint8_t chip_id = 0;
		460	411:../libBME280/src/bme280.c ****
		461	412:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		462	413:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		463	414:../libBME280/src/bme280.c ****
		464	415:../libBME280/src/bme280.c **** /* Proceed if null check is fine */
		465	416:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		466	417:../libBME280/src/bme280.c **** {
		467	418:../libBME280/src/bme280.c **** while (try_count)
		468	419:../libBME280/src/bme280.c **** {
		469	420:../libBME280/src/bme280.c **** /* Read the chip-id of bme280 sensor */
		470	421:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_CHIP_ID_ADDR, &chip_id, 1, dev);
		471	422:../libBME280/src/bme280.c ****
		472	423:../libBME280/src/bme280.c **** /* Check for chip id validity */
		473	424:../libBME280/src/bme280.c **** if ((rslt == BME280_OK) && (chip_id == BME280_CHIP_ID))
		474	425:../libBME280/src/bme280.c **** {
		475	426:../libBME280/src/bme280.c **** dev->chip_id = chip_id;
		476	427:../libBME280/src/bme280.c ****
		477	428:../libBME280/src/bme280.c **** /* Reset the sensor */
		478	429:../libBME280/src/bme280.c **** rslt = bme280_soft_reset(dev);
		479	430:../libBME280/src/bme280.c ****
		480	431:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		481	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 9
		482
		483
		484	432:../libBME280/src/bme280.c **** {
		485	433:../libBME280/src/bme280.c **** /* Read the calibration data */
		486	434:../libBME280/src/bme280.c **** rslt = get_calib_data(dev);
		487	435:../libBME280/src/bme280.c **** }
		488	436:../libBME280/src/bme280.c ****
		489	437:../libBME280/src/bme280.c **** break;
		490	438:../libBME280/src/bme280.c **** }
		491	439:../libBME280/src/bme280.c ****
		492	440:../libBME280/src/bme280.c **** /* Wait for 1 ms */
		493	441:../libBME280/src/bme280.c **** dev->delay_us(1000, dev->intf_ptr);
		494	442:../libBME280/src/bme280.c **** --try_count;
		495	443:../libBME280/src/bme280.c **** }
		496	444:../libBME280/src/bme280.c ****
		497	445:../libBME280/src/bme280.c **** /* Chip id check failed */
		498	446:../libBME280/src/bme280.c **** if (!try_count)
		499	447:../libBME280/src/bme280.c **** {
		500	448:../libBME280/src/bme280.c **** rslt = BME280_E_DEV_NOT_FOUND;
		501	449:../libBME280/src/bme280.c **** }
		502	450:../libBME280/src/bme280.c **** }
		503	451:../libBME280/src/bme280.c ****
		504	452:../libBME280/src/bme280.c **** return rslt;
		505	453:../libBME280/src/bme280.c **** }
		506	454:../libBME280/src/bme280.c ****
		507	455:../libBME280/src/bme280.c **** /*!
		508	456:../libBME280/src/bme280.c **** * @brief This API reads the data from the given register address of the sensor.
		509	457:../libBME280/src/bme280.c **** */
		510	458:../libBME280/src/bme280.c **** int8_t bme280_get_regs(uint8_t reg_addr, uint8_t reg_data, uint16_t len, struct bme280_dev dev)
		511	459:../libBME280/src/bme280.c **** {
		512	460:../libBME280/src/bme280.c **** int8_t rslt;
		513	461:../libBME280/src/bme280.c ****
		514	462:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		515	463:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		516	464:../libBME280/src/bme280.c ****
		517	465:../libBME280/src/bme280.c **** /* Proceed if null check is fine */
		518	466:../libBME280/src/bme280.c **** if ((rslt == BME280_OK) && (reg_data != NULL))
		519	467:../libBME280/src/bme280.c **** {
		520	468:../libBME280/src/bme280.c **** /* If interface selected is SPI */
		521	469:../libBME280/src/bme280.c **** if (dev->intf != BME280_I2C_INTF)
		522	470:../libBME280/src/bme280.c **** {
		523	471:../libBME280/src/bme280.c **** reg_addr = reg_addr \| 0x80;
		524	472:../libBME280/src/bme280.c **** }
		525	473:../libBME280/src/bme280.c ****
		526	474:../libBME280/src/bme280.c **** /* Read the data */
		527	475:../libBME280/src/bme280.c **** dev->intf_rslt = dev->read(reg_addr, reg_data, len, dev->intf_ptr);
		528	476:../libBME280/src/bme280.c ****
		529	477:../libBME280/src/bme280.c **** /* Check for communication error */
		530	478:../libBME280/src/bme280.c **** if (dev->intf_rslt != BME280_INTF_RET_SUCCESS)
		531	479:../libBME280/src/bme280.c **** {
		532	480:../libBME280/src/bme280.c **** rslt = BME280_E_COMM_FAIL;
		533	481:../libBME280/src/bme280.c **** }
		534	482:../libBME280/src/bme280.c **** }
		535	483:../libBME280/src/bme280.c **** else
		536	484:../libBME280/src/bme280.c **** {
		537	485:../libBME280/src/bme280.c **** rslt = BME280_E_NULL_PTR;
		538	486:../libBME280/src/bme280.c **** }
		539	487:../libBME280/src/bme280.c ****
		540	488:../libBME280/src/bme280.c **** return rslt;
		541	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 10
		542
		543
		544	489:../libBME280/src/bme280.c **** }
		545	490:../libBME280/src/bme280.c ****
		546	491:../libBME280/src/bme280.c **** /*!
		547	492:../libBME280/src/bme280.c **** * @brief This API writes the given data to the register address
		548	493:../libBME280/src/bme280.c **** * of the sensor.
		549	494:../libBME280/src/bme280.c **** */
		550	495:../libBME280/src/bme280.c **** int8_t bme280_set_regs(uint8_t reg_addr, const uint8_t reg_data, uint8_t len, struct bme280_dev *
		551	496:../libBME280/src/bme280.c **** {
		552	497:../libBME280/src/bme280.c **** int8_t rslt;
		553	498:../libBME280/src/bme280.c **** uint8_t temp_buff[20]; /* Typically not to write more than 10 registers */
		554	499:../libBME280/src/bme280.c ****
		555	500:../libBME280/src/bme280.c **** if (len > 10)
		556	501:../libBME280/src/bme280.c **** {
		557	502:../libBME280/src/bme280.c **** len = 10;
		558	503:../libBME280/src/bme280.c **** }
		559	504:../libBME280/src/bme280.c ****
		560	505:../libBME280/src/bme280.c **** uint16_t temp_len;
		561	506:../libBME280/src/bme280.c **** uint8_t reg_addr_cnt;
		562	507:../libBME280/src/bme280.c ****
		563	508:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		564	509:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		565	510:../libBME280/src/bme280.c ****
		566	511:../libBME280/src/bme280.c **** /* Check for arguments validity */
		567	512:../libBME280/src/bme280.c **** if ((rslt == BME280_OK) && (reg_addr != NULL) && (reg_data != NULL))
		568	513:../libBME280/src/bme280.c **** {
		569	514:../libBME280/src/bme280.c **** if (len != 0)
		570	515:../libBME280/src/bme280.c **** {
		571	516:../libBME280/src/bme280.c **** temp_buff[0] = reg_data[0];
		572	517:../libBME280/src/bme280.c ****
		573	518:../libBME280/src/bme280.c **** /* If interface selected is SPI */
		574	519:../libBME280/src/bme280.c **** if (dev->intf != BME280_I2C_INTF)
		575	520:../libBME280/src/bme280.c **** {
		576	521:../libBME280/src/bme280.c **** for (reg_addr_cnt = 0; reg_addr_cnt < len; reg_addr_cnt++)
		577	522:../libBME280/src/bme280.c **** {
		578	523:../libBME280/src/bme280.c **** reg_addr[reg_addr_cnt] = reg_addr[reg_addr_cnt] & 0x7F;
		579	524:../libBME280/src/bme280.c **** }
		580	525:../libBME280/src/bme280.c **** }
		581	526:../libBME280/src/bme280.c ****
		582	527:../libBME280/src/bme280.c **** /* Burst write mode */
		583	528:../libBME280/src/bme280.c **** if (len > 1)
		584	529:../libBME280/src/bme280.c **** {
		585	530:../libBME280/src/bme280.c **** /* Interleave register address w.r.t data for
		586	531:../libBME280/src/bme280.c **** * burst write
		587	532:../libBME280/src/bme280.c **** */
		588	533:../libBME280/src/bme280.c **** interleave_reg_addr(reg_addr, temp_buff, reg_data, len);
		589	534:../libBME280/src/bme280.c **** temp_len = ((len * 2) - 1);
		590	535:../libBME280/src/bme280.c **** }
		591	536:../libBME280/src/bme280.c **** else
		592	537:../libBME280/src/bme280.c **** {
		593	538:../libBME280/src/bme280.c **** temp_len = len;
		594	539:../libBME280/src/bme280.c **** }
		595	540:../libBME280/src/bme280.c ****
		596	541:../libBME280/src/bme280.c **** dev->intf_rslt = dev->write(reg_addr[0], temp_buff, temp_len, dev->intf_ptr);
		597	542:../libBME280/src/bme280.c ****
		598	543:../libBME280/src/bme280.c **** /* Check for communication error */
		599	544:../libBME280/src/bme280.c **** if (dev->intf_rslt != BME280_INTF_RET_SUCCESS)
		600	545:../libBME280/src/bme280.c **** {
		601	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 11
		602
		603
		604	546:../libBME280/src/bme280.c **** rslt = BME280_E_COMM_FAIL;
		605	547:../libBME280/src/bme280.c **** }
		606	548:../libBME280/src/bme280.c **** }
		607	549:../libBME280/src/bme280.c **** else
		608	550:../libBME280/src/bme280.c **** {
		609	551:../libBME280/src/bme280.c **** rslt = BME280_E_INVALID_LEN;
		610	552:../libBME280/src/bme280.c **** }
		611	553:../libBME280/src/bme280.c **** }
		612	554:../libBME280/src/bme280.c **** else
		613	555:../libBME280/src/bme280.c **** {
		614	556:../libBME280/src/bme280.c **** rslt = BME280_E_NULL_PTR;
		615	557:../libBME280/src/bme280.c **** }
		616	558:../libBME280/src/bme280.c ****
		617	559:../libBME280/src/bme280.c **** return rslt;
		618	560:../libBME280/src/bme280.c **** }
		619	561:../libBME280/src/bme280.c ****
		620	562:../libBME280/src/bme280.c **** /*!
		621	563:../libBME280/src/bme280.c **** * @brief This API sets the oversampling, filter and standby duration
		622	564:../libBME280/src/bme280.c **** * (normal mode) settings in the sensor.
		623	565:../libBME280/src/bme280.c **** */
		624	566:../libBME280/src/bme280.c **** int8_t bme280_set_sensor_settings(uint8_t desired_settings, struct bme280_dev *dev)
		625	567:../libBME280/src/bme280.c **** {
		626	568:../libBME280/src/bme280.c **** int8_t rslt;
		627	569:../libBME280/src/bme280.c **** uint8_t sensor_mode;
		628	570:../libBME280/src/bme280.c ****
		629	571:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		630	572:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		631	573:../libBME280/src/bme280.c ****
		632	574:../libBME280/src/bme280.c **** /* Proceed if null check is fine */
		633	575:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		634	576:../libBME280/src/bme280.c **** {
		635	577:../libBME280/src/bme280.c **** rslt = bme280_get_sensor_mode(&sensor_mode, dev);
		636	578:../libBME280/src/bme280.c ****
		637	579:../libBME280/src/bme280.c **** if ((rslt == BME280_OK) && (sensor_mode != BME280_SLEEP_MODE))
		638	580:../libBME280/src/bme280.c **** {
		639	581:../libBME280/src/bme280.c **** rslt = put_device_to_sleep(dev);
		640	582:../libBME280/src/bme280.c **** }
		641	583:../libBME280/src/bme280.c ****
		642	584:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		643	585:../libBME280/src/bme280.c **** {
		644	586:../libBME280/src/bme280.c **** /* Check if user wants to change oversampling
		645	587:../libBME280/src/bme280.c **** * settings
		646	588:../libBME280/src/bme280.c **** */
		647	589:../libBME280/src/bme280.c **** if (are_settings_changed(OVERSAMPLING_SETTINGS, desired_settings))
		648	590:../libBME280/src/bme280.c **** {
		649	591:../libBME280/src/bme280.c **** rslt = set_osr_settings(desired_settings, &dev->settings, dev);
		650	592:../libBME280/src/bme280.c **** }
		651	593:../libBME280/src/bme280.c ****
		652	594:../libBME280/src/bme280.c **** /* Check if user wants to change filter and/or
		653	595:../libBME280/src/bme280.c **** * standby settings
		654	596:../libBME280/src/bme280.c **** */
		655	597:../libBME280/src/bme280.c **** if ((rslt == BME280_OK) && are_settings_changed(FILTER_STANDBY_SETTINGS, desired_settin
		656	598:../libBME280/src/bme280.c **** {
		657	599:../libBME280/src/bme280.c **** rslt = set_filter_standby_settings(desired_settings, &dev->settings, dev);
		658	600:../libBME280/src/bme280.c **** }
		659	601:../libBME280/src/bme280.c **** }
		660	602:../libBME280/src/bme280.c **** }
		661	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 12
		662
		663
		664	603:../libBME280/src/bme280.c ****
		665	604:../libBME280/src/bme280.c **** return rslt;
		666	605:../libBME280/src/bme280.c **** }
		667	606:../libBME280/src/bme280.c ****
		668	607:../libBME280/src/bme280.c **** /*!
		669	608:../libBME280/src/bme280.c **** * @brief This API gets the oversampling, filter and standby duration
		670	609:../libBME280/src/bme280.c **** * (normal mode) settings from the sensor.
		671	610:../libBME280/src/bme280.c **** */
		672	611:../libBME280/src/bme280.c **** int8_t bme280_get_sensor_settings(struct bme280_dev *dev)
		673	612:../libBME280/src/bme280.c **** {
		674	613:../libBME280/src/bme280.c **** int8_t rslt;
		675	614:../libBME280/src/bme280.c **** uint8_t reg_data[4];
		676	615:../libBME280/src/bme280.c ****
		677	616:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		678	617:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		679	618:../libBME280/src/bme280.c ****
		680	619:../libBME280/src/bme280.c **** /* Proceed if null check is fine */
		681	620:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		682	621:../libBME280/src/bme280.c **** {
		683	622:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_CTRL_HUM_ADDR, reg_data, 4, dev);
		684	623:../libBME280/src/bme280.c ****
		685	624:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		686	625:../libBME280/src/bme280.c **** {
		687	626:../libBME280/src/bme280.c **** parse_device_settings(reg_data, &dev->settings);
		688	627:../libBME280/src/bme280.c **** }
		689	628:../libBME280/src/bme280.c **** }
		690	629:../libBME280/src/bme280.c ****
		691	630:../libBME280/src/bme280.c **** return rslt;
		692	631:../libBME280/src/bme280.c **** }
		693	632:../libBME280/src/bme280.c ****
		694	633:../libBME280/src/bme280.c **** /*!
		695	634:../libBME280/src/bme280.c **** * @brief This API sets the power mode of the sensor.
		696	635:../libBME280/src/bme280.c **** */
		697	636:../libBME280/src/bme280.c **** int8_t bme280_set_sensor_mode(uint8_t sensor_mode, struct bme280_dev *dev)
		698	637:../libBME280/src/bme280.c **** {
		699	638:../libBME280/src/bme280.c **** int8_t rslt;
		700	639:../libBME280/src/bme280.c **** uint8_t last_set_mode;
		701	640:../libBME280/src/bme280.c ****
		702	641:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		703	642:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		704	643:../libBME280/src/bme280.c ****
		705	644:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		706	645:../libBME280/src/bme280.c **** {
		707	646:../libBME280/src/bme280.c **** rslt = bme280_get_sensor_mode(&last_set_mode, dev);
		708	647:../libBME280/src/bme280.c ****
		709	648:../libBME280/src/bme280.c **** /* If the sensor is not in sleep mode put the device to sleep
		710	649:../libBME280/src/bme280.c **** * mode
		711	650:../libBME280/src/bme280.c **** */
		712	651:../libBME280/src/bme280.c **** if ((rslt == BME280_OK) && (last_set_mode != BME280_SLEEP_MODE))
		713	652:../libBME280/src/bme280.c **** {
		714	653:../libBME280/src/bme280.c **** rslt = put_device_to_sleep(dev);
		715	654:../libBME280/src/bme280.c **** }
		716	655:../libBME280/src/bme280.c ****
		717	656:../libBME280/src/bme280.c **** /* Set the power mode */
		718	657:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		719	658:../libBME280/src/bme280.c **** {
		720	659:../libBME280/src/bme280.c **** rslt = write_power_mode(sensor_mode, dev);
		721	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 13
		722
		723
		724	660:../libBME280/src/bme280.c **** }
		725	661:../libBME280/src/bme280.c **** }
		726	662:../libBME280/src/bme280.c ****
		727	663:../libBME280/src/bme280.c **** return rslt;
		728	664:../libBME280/src/bme280.c **** }
		729	665:../libBME280/src/bme280.c ****
		730	666:../libBME280/src/bme280.c **** /*!
		731	667:../libBME280/src/bme280.c **** * @brief This API gets the power mode of the sensor.
		732	668:../libBME280/src/bme280.c **** */
		733	669:../libBME280/src/bme280.c **** int8_t bme280_get_sensor_mode(uint8_t sensor_mode, struct bme280_dev dev)
		734	670:../libBME280/src/bme280.c **** {
		735	671:../libBME280/src/bme280.c **** int8_t rslt;
		736	672:../libBME280/src/bme280.c ****
		737	673:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		738	674:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		739	675:../libBME280/src/bme280.c ****
		740	676:../libBME280/src/bme280.c **** if ((rslt == BME280_OK) && (sensor_mode != NULL))
		741	677:../libBME280/src/bme280.c **** {
		742	678:../libBME280/src/bme280.c **** /* Read the power mode register */
		743	679:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_PWR_CTRL_ADDR, sensor_mode, 1, dev);
		744	680:../libBME280/src/bme280.c ****
		745	681:../libBME280/src/bme280.c **** /* Assign the power mode in the device structure */
		746	682:../libBME280/src/bme280.c **** sensor_mode = BME280_GET_BITS_POS_0(sensor_mode, BME280_SENSOR_MODE);
		747	683:../libBME280/src/bme280.c **** }
		748	684:../libBME280/src/bme280.c **** else
		749	685:../libBME280/src/bme280.c **** {
		750	686:../libBME280/src/bme280.c **** rslt = BME280_E_NULL_PTR;
		751	687:../libBME280/src/bme280.c **** }
		752	688:../libBME280/src/bme280.c ****
		753	689:../libBME280/src/bme280.c **** return rslt;
		754	690:../libBME280/src/bme280.c **** }
		755	691:../libBME280/src/bme280.c ****
		756	692:../libBME280/src/bme280.c **** /*!
		757	693:../libBME280/src/bme280.c **** * @brief This API performs the soft reset of the sensor.
		758	694:../libBME280/src/bme280.c **** */
		759	695:../libBME280/src/bme280.c **** int8_t bme280_soft_reset(struct bme280_dev *dev)
		760	696:../libBME280/src/bme280.c **** {
		761	697:../libBME280/src/bme280.c **** int8_t rslt;
		762	698:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_RESET_ADDR;
		763	699:../libBME280/src/bme280.c **** uint8_t status_reg = 0;
		764	700:../libBME280/src/bme280.c **** uint8_t try_run = 5;
		765	701:../libBME280/src/bme280.c ****
		766	702:../libBME280/src/bme280.c **** /* 0xB6 is the soft reset command */
		767	703:../libBME280/src/bme280.c **** uint8_t soft_rst_cmd = BME280_SOFT_RESET_COMMAND;
		768	704:../libBME280/src/bme280.c ****
		769	705:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		770	706:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		771	707:../libBME280/src/bme280.c ****
		772	708:../libBME280/src/bme280.c **** /* Proceed if null check is fine */
		773	709:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		774	710:../libBME280/src/bme280.c **** {
		775	711:../libBME280/src/bme280.c **** /* Write the soft reset command in the sensor */
		776	712:../libBME280/src/bme280.c **** rslt = bme280_set_regs(&reg_addr, &soft_rst_cmd, 1, dev);
		777	713:../libBME280/src/bme280.c ****
		778	714:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		779	715:../libBME280/src/bme280.c **** {
		780	716:../libBME280/src/bme280.c **** /* If NVM not copied yet, Wait for NVM to copy */
		781	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 14
		782
		783
		784	717:../libBME280/src/bme280.c **** do
		785	718:../libBME280/src/bme280.c **** {
		786	719:../libBME280/src/bme280.c **** /* As per data sheet - Table 1, startup time is 2 ms. */
		787	720:../libBME280/src/bme280.c **** dev->delay_us(2000, dev->intf_ptr);
		788	721:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_STATUS_REG_ADDR, &status_reg, 1, dev);
		789	722:../libBME280/src/bme280.c ****
		790	723:../libBME280/src/bme280.c **** } while ((rslt == BME280_OK) && (try_run--) && (status_reg & BME280_STATUS_IM_UPDATE));
		791	724:../libBME280/src/bme280.c ****
		792	725:../libBME280/src/bme280.c **** if (status_reg & BME280_STATUS_IM_UPDATE)
		793	726:../libBME280/src/bme280.c **** {
		794	727:../libBME280/src/bme280.c **** rslt = BME280_E_NVM_COPY_FAILED;
		795	728:../libBME280/src/bme280.c **** }
		796	729:../libBME280/src/bme280.c **** }
		797	730:../libBME280/src/bme280.c **** }
		798	731:../libBME280/src/bme280.c ****
		799	732:../libBME280/src/bme280.c **** return rslt;
		800	733:../libBME280/src/bme280.c **** }
		801	734:../libBME280/src/bme280.c ****
		802	735:../libBME280/src/bme280.c **** /*!
		803	736:../libBME280/src/bme280.c **** * @brief This API reads the pressure, temperature and humidity data from the
		804	737:../libBME280/src/bme280.c **** * sensor, compensates the data and store it in the bme280_data structure
		805	738:../libBME280/src/bme280.c **** * instance passed by the user.
		806	739:../libBME280/src/bme280.c **** */
		807	740:../libBME280/src/bme280.c **** int8_t bme280_get_sensor_data(uint8_t sensor_comp, struct bme280_data *comp_data, struct bme280_dev
		808	741:../libBME280/src/bme280.c **** {
		809	742:../libBME280/src/bme280.c **** int8_t rslt;
		810	743:../libBME280/src/bme280.c ****
		811	744:../libBME280/src/bme280.c **** /* Array to store the pressure, temperature and humidity data read from
		812	745:../libBME280/src/bme280.c **** * the sensor
		813	746:../libBME280/src/bme280.c **** */
		814	747:../libBME280/src/bme280.c **** uint8_t reg_data[BME280_P_T_H_DATA_LEN] = { 0 };
		815	748:../libBME280/src/bme280.c **** struct bme280_uncomp_data uncomp_data = { 0 };
		816	749:../libBME280/src/bme280.c ****
		817	750:../libBME280/src/bme280.c **** /* Check for null pointer in the device structure*/
		818	751:../libBME280/src/bme280.c **** rslt = null_ptr_check(dev);
		819	752:../libBME280/src/bme280.c ****
		820	753:../libBME280/src/bme280.c **** if ((rslt == BME280_OK) && (comp_data != NULL))
		821	754:../libBME280/src/bme280.c **** {
		822	755:../libBME280/src/bme280.c **** /* Read the pressure and temperature data from the sensor */
		823	756:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_DATA_ADDR, reg_data, BME280_P_T_H_DATA_LEN, dev);
		824	757:../libBME280/src/bme280.c ****
		825	758:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		826	759:../libBME280/src/bme280.c **** {
		827	760:../libBME280/src/bme280.c **** /* Parse the read data from the sensor */
		828	761:../libBME280/src/bme280.c **** bme280_parse_sensor_data(reg_data, &uncomp_data);
		829	762:../libBME280/src/bme280.c ****
		830	763:../libBME280/src/bme280.c **** /* Compensate the pressure and/or temperature and/or
		831	764:../libBME280/src/bme280.c **** * humidity data from the sensor
		832	765:../libBME280/src/bme280.c **** */
		833	766:../libBME280/src/bme280.c **** rslt = bme280_compensate_data(sensor_comp, &uncomp_data, comp_data, &dev->calib_data);
		834	767:../libBME280/src/bme280.c **** }
		835	768:../libBME280/src/bme280.c **** }
		836	769:../libBME280/src/bme280.c **** else
		837	770:../libBME280/src/bme280.c **** {
		838	771:../libBME280/src/bme280.c **** rslt = BME280_E_NULL_PTR;
		839	772:../libBME280/src/bme280.c **** }
		840	773:../libBME280/src/bme280.c ****
		841	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 15
		842
		843
		844	774:../libBME280/src/bme280.c **** return rslt;
		845	775:../libBME280/src/bme280.c **** }
		846	776:../libBME280/src/bme280.c ****
		847	777:../libBME280/src/bme280.c **** /*!
		848	778:../libBME280/src/bme280.c **** * @brief This API is used to parse the pressure, temperature and
		849	779:../libBME280/src/bme280.c **** * humidity data and store it in the bme280_uncomp_data structure instance.
		850	780:../libBME280/src/bme280.c **** */
		851	781:../libBME280/src/bme280.c **** void bme280_parse_sensor_data(const uint8_t reg_data, struct bme280_uncomp_data uncomp_data)
		852	782:../libBME280/src/bme280.c **** {
		853	783:../libBME280/src/bme280.c **** /* Variables to store the sensor data */
		854	784:../libBME280/src/bme280.c **** uint32_t data_xlsb;
		855	785:../libBME280/src/bme280.c **** uint32_t data_lsb;
		856	786:../libBME280/src/bme280.c **** uint32_t data_msb;
		857	787:../libBME280/src/bme280.c ****
		858	788:../libBME280/src/bme280.c **** /* Store the parsed register values for pressure data */
		859	789:../libBME280/src/bme280.c **** data_msb = (uint32_t)reg_data[0] << 12;
		860	790:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[1] << 4;
		861	791:../libBME280/src/bme280.c **** data_xlsb = (uint32_t)reg_data[2] >> 4;
		862	792:../libBME280/src/bme280.c **** uncomp_data->pressure = data_msb \| data_lsb \| data_xlsb;
		863	793:../libBME280/src/bme280.c ****
		864	794:../libBME280/src/bme280.c **** /* Store the parsed register values for temperature data */
		865	795:../libBME280/src/bme280.c **** data_msb = (uint32_t)reg_data[3] << 12;
		866	796:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[4] << 4;
		867	797:../libBME280/src/bme280.c **** data_xlsb = (uint32_t)reg_data[5] >> 4;
		868	798:../libBME280/src/bme280.c **** uncomp_data->temperature = data_msb \| data_lsb \| data_xlsb;
		869	799:../libBME280/src/bme280.c ****
		870	800:../libBME280/src/bme280.c **** /* Store the parsed register values for humidity data */
		871	801:../libBME280/src/bme280.c **** data_msb = (uint32_t)reg_data[6] << 8;
		872	802:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[7];
		873	803:../libBME280/src/bme280.c **** uncomp_data->humidity = data_msb \| data_lsb;
		874	804:../libBME280/src/bme280.c **** }
		875	805:../libBME280/src/bme280.c ****
		876	806:../libBME280/src/bme280.c **** /*!
		877	807:../libBME280/src/bme280.c **** * @brief This API is used to compensate the pressure and/or
		878	808:../libBME280/src/bme280.c **** * temperature and/or humidity data according to the component selected
		879	809:../libBME280/src/bme280.c **** * by the user.
		880	810:../libBME280/src/bme280.c **** */
		881	811:../libBME280/src/bme280.c **** int8_t bme280_compensate_data(uint8_t sensor_comp,
		882	812:../libBME280/src/bme280.c **** const struct bme280_uncomp_data *uncomp_data,
		883	813:../libBME280/src/bme280.c **** struct bme280_data *comp_data,
		884	814:../libBME280/src/bme280.c **** struct bme280_calib_data *calib_data)
		885	815:../libBME280/src/bme280.c **** {
		886	816:../libBME280/src/bme280.c **** int8_t rslt = BME280_OK;
		887	817:../libBME280/src/bme280.c ****
		888	818:../libBME280/src/bme280.c **** if ((uncomp_data != NULL) && (comp_data != NULL) && (calib_data != NULL))
		889	819:../libBME280/src/bme280.c **** {
		890	820:../libBME280/src/bme280.c **** /* Initialize to zero */
		891	821:../libBME280/src/bme280.c **** comp_data->temperature = 0;
		892	822:../libBME280/src/bme280.c **** comp_data->pressure = 0;
		893	823:../libBME280/src/bme280.c **** comp_data->humidity = 0;
		894	824:../libBME280/src/bme280.c ****
		895	825:../libBME280/src/bme280.c **** /* If pressure or temperature component is selected */
		896	826:../libBME280/src/bme280.c **** if (sensor_comp & (BME280_PRESS \| BME280_TEMP \| BME280_HUM))
		897	827:../libBME280/src/bme280.c **** {
		898	828:../libBME280/src/bme280.c **** /* Compensate the temperature data */
		899	829:../libBME280/src/bme280.c **** comp_data->temperature = compensate_temperature(uncomp_data, calib_data);
		900	830:../libBME280/src/bme280.c **** }
		901	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 16
		902
		903
		904	831:../libBME280/src/bme280.c ****
		905	832:../libBME280/src/bme280.c **** if (sensor_comp & BME280_PRESS)
		906	833:../libBME280/src/bme280.c **** {
		907	834:../libBME280/src/bme280.c **** /* Compensate the pressure data */
		908	835:../libBME280/src/bme280.c **** comp_data->pressure = compensate_pressure(uncomp_data, calib_data);
		909	836:../libBME280/src/bme280.c **** }
		910	837:../libBME280/src/bme280.c ****
		911	838:../libBME280/src/bme280.c **** if (sensor_comp & BME280_HUM)
		912	839:../libBME280/src/bme280.c **** {
		913	840:../libBME280/src/bme280.c **** /* Compensate the humidity data */
		914	841:../libBME280/src/bme280.c **** comp_data->humidity = compensate_humidity(uncomp_data, calib_data);
		915	842:../libBME280/src/bme280.c **** }
		916	843:../libBME280/src/bme280.c **** }
		917	844:../libBME280/src/bme280.c **** else
		918	845:../libBME280/src/bme280.c **** {
		919	846:../libBME280/src/bme280.c **** rslt = BME280_E_NULL_PTR;
		920	847:../libBME280/src/bme280.c **** }
		921	848:../libBME280/src/bme280.c ****
		922	849:../libBME280/src/bme280.c **** return rslt;
		923	850:../libBME280/src/bme280.c **** }
		924	851:../libBME280/src/bme280.c ****
		925	852:../libBME280/src/bme280.c **** /*!
		926	853:../libBME280/src/bme280.c **** * @brief This API is used to calculate the maximum delay in milliseconds required for the
		927	854:../libBME280/src/bme280.c **** * temperature/pressure/humidity(which ever at enabled) measurement to complete.
		928	855:../libBME280/src/bme280.c **** */
		929	856:../libBME280/src/bme280.c **** uint32_t bme280_cal_meas_delay(const struct bme280_settings *settings)
		930	857:../libBME280/src/bme280.c **** {
		931	858:../libBME280/src/bme280.c **** uint32_t max_delay;
		932	859:../libBME280/src/bme280.c **** uint8_t temp_osr;
		933	860:../libBME280/src/bme280.c **** uint8_t pres_osr;
		934	861:../libBME280/src/bme280.c **** uint8_t hum_osr;
		935	862:../libBME280/src/bme280.c ****
		936	863:../libBME280/src/bme280.c **** /Array to map OSR config register value to actual OSR /
		937	864:../libBME280/src/bme280.c **** uint8_t osr_sett_to_act_osr[] = { 0, 1, 2, 4, 8, 16 };
		938	865:../libBME280/src/bme280.c ****
		939	866:../libBME280/src/bme280.c **** /* Mapping osr settings to the actual osr values e.g. 0b101 -> osr X16 */
		940	867:../libBME280/src/bme280.c **** if (settings->osr_t <= 5)
		941	868:../libBME280/src/bme280.c **** {
		942	869:../libBME280/src/bme280.c **** temp_osr = osr_sett_to_act_osr[settings->osr_t];
		943	870:../libBME280/src/bme280.c **** }
		944	871:../libBME280/src/bme280.c **** else
		945	872:../libBME280/src/bme280.c **** {
		946	873:../libBME280/src/bme280.c **** temp_osr = 16;
		947	874:../libBME280/src/bme280.c **** }
		948	875:../libBME280/src/bme280.c ****
		949	876:../libBME280/src/bme280.c **** if (settings->osr_p <= 5)
		950	877:../libBME280/src/bme280.c **** {
		951	878:../libBME280/src/bme280.c **** pres_osr = osr_sett_to_act_osr[settings->osr_p];
		952	879:../libBME280/src/bme280.c **** }
		953	880:../libBME280/src/bme280.c **** else
		954	881:../libBME280/src/bme280.c **** {
		955	882:../libBME280/src/bme280.c **** pres_osr = 16;
		956	883:../libBME280/src/bme280.c **** }
		957	884:../libBME280/src/bme280.c ****
		958	885:../libBME280/src/bme280.c **** if (settings->osr_h <= 5)
		959	886:../libBME280/src/bme280.c **** {
		960	887:../libBME280/src/bme280.c **** hum_osr = osr_sett_to_act_osr[settings->osr_h];
		961	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 17
		962
		963
		964	888:../libBME280/src/bme280.c **** }
		965	889:../libBME280/src/bme280.c **** else
		966	890:../libBME280/src/bme280.c **** {
		967	891:../libBME280/src/bme280.c **** hum_osr = 16;
		968	892:../libBME280/src/bme280.c **** }
		969	893:../libBME280/src/bme280.c ****
		970	894:../libBME280/src/bme280.c **** max_delay =
		971	895:../libBME280/src/bme280.c **** (uint32_t)((BME280_MEAS_OFFSET + (BME280_MEAS_DUR * temp_osr) +
		972	896:../libBME280/src/bme280.c **** ((BME280_MEAS_DUR * pres_osr) + BME280_PRES_HUM_MEAS_OFFSET) +
		973	897:../libBME280/src/bme280.c **** ((BME280_MEAS_DUR * hum_osr) + BME280_PRES_HUM_MEAS_OFFSET)) / BME280_MEAS_SCAL
		974	898:../libBME280/src/bme280.c ****
		975	899:../libBME280/src/bme280.c **** return max_delay;
		976	900:../libBME280/src/bme280.c **** }
		977	901:../libBME280/src/bme280.c ****
		978	902:../libBME280/src/bme280.c **** /*!
		979	903:../libBME280/src/bme280.c **** * @brief This internal API sets the oversampling settings for pressure,
		980	904:../libBME280/src/bme280.c **** * temperature and humidity in the sensor.
		981	905:../libBME280/src/bme280.c **** */
		982	906:../libBME280/src/bme280.c **** static int8_t set_osr_settings(uint8_t desired_settings, const struct bme280_settings *settings, st
		983	907:../libBME280/src/bme280.c **** {
		984	908:../libBME280/src/bme280.c **** int8_t rslt = BME280_W_INVALID_OSR_MACRO;
		985	909:../libBME280/src/bme280.c ****
		986	910:../libBME280/src/bme280.c **** if (desired_settings & BME280_OSR_HUM_SEL)
		987	911:../libBME280/src/bme280.c **** {
		988	912:../libBME280/src/bme280.c **** rslt = set_osr_humidity_settings(settings, dev);
		989	913:../libBME280/src/bme280.c **** }
		990	914:../libBME280/src/bme280.c ****
		991	915:../libBME280/src/bme280.c **** if (desired_settings & (BME280_OSR_PRESS_SEL \| BME280_OSR_TEMP_SEL))
		992	916:../libBME280/src/bme280.c **** {
		993	917:../libBME280/src/bme280.c **** rslt = set_osr_press_temp_settings(desired_settings, settings, dev);
		994	918:../libBME280/src/bme280.c **** }
		995	919:../libBME280/src/bme280.c ****
		996	920:../libBME280/src/bme280.c **** return rslt;
		997	921:../libBME280/src/bme280.c **** }
		998	922:../libBME280/src/bme280.c ****
		999	923:../libBME280/src/bme280.c **** /*!
		1000	924:../libBME280/src/bme280.c **** * @brief This API sets the humidity oversampling settings of the sensor.
		1001	925:../libBME280/src/bme280.c **** */
		1002	926:../libBME280/src/bme280.c **** static int8_t set_osr_humidity_settings(const struct bme280_settings settings, struct bme280_dev
		1003	927:../libBME280/src/bme280.c **** {
		1004	928:../libBME280/src/bme280.c **** int8_t rslt;
		1005	929:../libBME280/src/bme280.c **** uint8_t ctrl_hum;
		1006	930:../libBME280/src/bme280.c **** uint8_t ctrl_meas;
		1007	931:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_CTRL_HUM_ADDR;
		1008	932:../libBME280/src/bme280.c ****
		1009	933:../libBME280/src/bme280.c **** ctrl_hum = settings->osr_h & BME280_CTRL_HUM_MSK;
		1010	934:../libBME280/src/bme280.c ****
		1011	935:../libBME280/src/bme280.c **** /* Write the humidity control value in the register */
		1012	936:../libBME280/src/bme280.c **** rslt = bme280_set_regs(&reg_addr, &ctrl_hum, 1, dev);
		1013	937:../libBME280/src/bme280.c ****
		1014	938:../libBME280/src/bme280.c **** /* Humidity related changes will be only effective after a
		1015	939:../libBME280/src/bme280.c **** * write operation to ctrl_meas register
		1016	940:../libBME280/src/bme280.c **** */
		1017	941:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		1018	942:../libBME280/src/bme280.c **** {
		1019	943:../libBME280/src/bme280.c **** reg_addr = BME280_CTRL_MEAS_ADDR;
		1020	944:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, &ctrl_meas, 1, dev);
		1021	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 18
		1022
		1023
		1024	945:../libBME280/src/bme280.c ****
		1025	946:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		1026	947:../libBME280/src/bme280.c **** {
		1027	948:../libBME280/src/bme280.c **** rslt = bme280_set_regs(&reg_addr, &ctrl_meas, 1, dev);
		1028	949:../libBME280/src/bme280.c **** }
		1029	950:../libBME280/src/bme280.c **** }
		1030	951:../libBME280/src/bme280.c ****
		1031	952:../libBME280/src/bme280.c **** return rslt;
		1032	953:../libBME280/src/bme280.c **** }
		1033	954:../libBME280/src/bme280.c ****
		1034	955:../libBME280/src/bme280.c **** /*!
		1035	956:../libBME280/src/bme280.c **** * @brief This API sets the pressure and/or temperature oversampling settings
		1036	957:../libBME280/src/bme280.c **** * in the sensor according to the settings selected by the user.
		1037	958:../libBME280/src/bme280.c **** */
		1038	959:../libBME280/src/bme280.c **** static int8_t set_osr_press_temp_settings(uint8_t desired_settings,
		1039	960:../libBME280/src/bme280.c **** const struct bme280_settings *settings,
		1040	961:../libBME280/src/bme280.c **** struct bme280_dev *dev)
		1041	962:../libBME280/src/bme280.c **** {
		1042	963:../libBME280/src/bme280.c **** int8_t rslt;
		1043	964:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_CTRL_MEAS_ADDR;
		1044	965:../libBME280/src/bme280.c **** uint8_t reg_data;
		1045	966:../libBME280/src/bme280.c ****
		1046	967:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, &reg_data, 1, dev);
		1047	968:../libBME280/src/bme280.c ****
		1048	969:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		1049	970:../libBME280/src/bme280.c **** {
		1050	971:../libBME280/src/bme280.c **** if (desired_settings & BME280_OSR_PRESS_SEL)
		1051	972:../libBME280/src/bme280.c **** {
		1052	973:../libBME280/src/bme280.c **** fill_osr_press_settings(&reg_data, settings);
		1053	974:../libBME280/src/bme280.c **** }
		1054	975:../libBME280/src/bme280.c ****
		1055	976:../libBME280/src/bme280.c **** if (desired_settings & BME280_OSR_TEMP_SEL)
		1056	977:../libBME280/src/bme280.c **** {
		1057	978:../libBME280/src/bme280.c **** fill_osr_temp_settings(&reg_data, settings);
		1058	979:../libBME280/src/bme280.c **** }
		1059	980:../libBME280/src/bme280.c ****
		1060	981:../libBME280/src/bme280.c **** /* Write the oversampling settings in the register */
		1061	982:../libBME280/src/bme280.c **** rslt = bme280_set_regs(&reg_addr, &reg_data, 1, dev);
		1062	983:../libBME280/src/bme280.c **** }
		1063	984:../libBME280/src/bme280.c ****
		1064	985:../libBME280/src/bme280.c **** return rslt;
		1065	986:../libBME280/src/bme280.c **** }
		1066	987:../libBME280/src/bme280.c ****
		1067	988:../libBME280/src/bme280.c **** /*!
		1068	989:../libBME280/src/bme280.c **** * @brief This internal API sets the filter and/or standby duration settings
		1069	990:../libBME280/src/bme280.c **** * in the sensor according to the settings selected by the user.
		1070	991:../libBME280/src/bme280.c **** */
		1071	992:../libBME280/src/bme280.c **** static int8_t set_filter_standby_settings(uint8_t desired_settings,
		1072	993:../libBME280/src/bme280.c **** const struct bme280_settings *settings,
		1073	994:../libBME280/src/bme280.c **** struct bme280_dev *dev)
		1074	995:../libBME280/src/bme280.c **** {
		1075	996:../libBME280/src/bme280.c **** int8_t rslt;
		1076	997:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_CONFIG_ADDR;
		1077	998:../libBME280/src/bme280.c **** uint8_t reg_data;
		1078	999:../libBME280/src/bme280.c ****
		1079	1000:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, &reg_data, 1, dev);
		1080	1001:../libBME280/src/bme280.c ****
		1081	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 19
		1082
		1083
		1084	1002:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		1085	1003:../libBME280/src/bme280.c **** {
		1086	1004:../libBME280/src/bme280.c **** if (desired_settings & BME280_FILTER_SEL)
		1087	1005:../libBME280/src/bme280.c **** {
		1088	1006:../libBME280/src/bme280.c **** fill_filter_settings(&reg_data, settings);
		1089	1007:../libBME280/src/bme280.c **** }
		1090	1008:../libBME280/src/bme280.c ****
		1091	1009:../libBME280/src/bme280.c **** if (desired_settings & BME280_STANDBY_SEL)
		1092	1010:../libBME280/src/bme280.c **** {
		1093	1011:../libBME280/src/bme280.c **** fill_standby_settings(&reg_data, settings);
		1094	1012:../libBME280/src/bme280.c **** }
		1095	1013:../libBME280/src/bme280.c ****
		1096	1014:../libBME280/src/bme280.c **** /* Write the oversampling settings in the register */
		1097	1015:../libBME280/src/bme280.c **** rslt = bme280_set_regs(&reg_addr, &reg_data, 1, dev);
		1098	1016:../libBME280/src/bme280.c **** }
		1099	1017:../libBME280/src/bme280.c ****
		1100	1018:../libBME280/src/bme280.c **** return rslt;
		1101	1019:../libBME280/src/bme280.c **** }
		1102	1020:../libBME280/src/bme280.c ****
		1103	1021:../libBME280/src/bme280.c **** /*!
		1104	1022:../libBME280/src/bme280.c **** * @brief This internal API fills the filter settings provided by the user
		1105	1023:../libBME280/src/bme280.c **** * in the data buffer so as to write in the sensor.
		1106	1024:../libBME280/src/bme280.c **** */
		1107	1025:../libBME280/src/bme280.c **** static void fill_filter_settings(uint8_t reg_data, const struct bme280_settings settings)
		1108	1026:../libBME280/src/bme280.c **** {
		1109	27 .loc 1 1026 1 view -0
		1110	28 .cfi_startproc
		1111	29 @ args = 0, pretend = 0, frame = 0
		1112	30 @ frame_needed = 0, uses_anonymous_args = 0
		1113	31 @ link register save eliminated.
		1114	1027:../libBME280/src/bme280.c **** reg_data = BME280_SET_BITS(reg_data, BME280_FILTER, settings->filter);
		1115	32 .loc 1 1027 5 view .LVU1
		1116	33 .loc 1 1027 17 is_stmt 0 view .LVU2
		1117	34 0000 90F90030 ldrsb r3, [r0]
		1118	35 0004 23F01C03 bic r3, r3, #28
		1119	36 0008 CA78 ldrb r2, [r1, #3] @ zero_extendqisi2
		1120	37 000a 9200 lsls r2, r2, #2
		1121	38 000c 02F01C02 and r2, r2, #28
		1122	39 0010 1343 orrs r3, r3, r2
		1123	40 .loc 1 1027 15 view .LVU3
		1124	41 0012 0370 strb r3, [r0]
		1125	1028:../libBME280/src/bme280.c **** }
		1126	42 .loc 1 1028 1 view .LVU4
		1127	43 0014 7047 bx lr
		1128	44 .cfi_endproc
		1129	45 .LFE16:
		1130	47 .section .text.fill_standby_settings,"ax",%progbits
		1131	48 .align 1
		1132	49 .syntax unified
		1133	50 .thumb
		1134	51 .thumb_func
		1135	52 .fpu softvfp
		1136	54 fill_standby_settings:
		1137	55 .LVL1:
		1138	56 .LFB17:
		1139	1029:../libBME280/src/bme280.c ****
		1140	1030:../libBME280/src/bme280.c **** /*!
		1141	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 20
		1142
		1143
		1144	1031:../libBME280/src/bme280.c **** * @brief This internal API fills the standby duration settings provided by
		1145	1032:../libBME280/src/bme280.c **** * the user in the data buffer so as to write in the sensor.
		1146	1033:../libBME280/src/bme280.c **** */
		1147	1034:../libBME280/src/bme280.c **** static void fill_standby_settings(uint8_t reg_data, const struct bme280_settings settings)
		1148	1035:../libBME280/src/bme280.c **** {
		1149	57 .loc 1 1035 1 is_stmt 1 view -0
		1150	58 .cfi_startproc
		1151	59 @ args = 0, pretend = 0, frame = 0
		1152	60 @ frame_needed = 0, uses_anonymous_args = 0
		1153	61 @ link register save eliminated.
		1154	1036:../libBME280/src/bme280.c **** reg_data = BME280_SET_BITS(reg_data, BME280_STANDBY, settings->standby_time);
		1155	62 .loc 1 1036 5 view .LVU6
		1156	63 .loc 1 1036 17 is_stmt 0 view .LVU7
		1157	64 0000 90F90030 ldrsb r3, [r0]
		1158	65 0004 03F01F03 and r3, r3, #31
		1159	66 0008 0A79 ldrb r2, [r1, #4] @ zero_extendqisi2
		1160	67 000a 43EA4213 orr r3, r3, r2, lsl #5
		1161	68 .loc 1 1036 15 view .LVU8
		1162	69 000e 0370 strb r3, [r0]
		1163	1037:../libBME280/src/bme280.c **** }
		1164	70 .loc 1 1037 1 view .LVU9
		1165	71 0010 7047 bx lr
		1166	72 .cfi_endproc
		1167	73 .LFE17:
		1168	75 .section .text.fill_osr_press_settings,"ax",%progbits
		1169	76 .align 1
		1170	77 .syntax unified
		1171	78 .thumb
		1172	79 .thumb_func
		1173	80 .fpu softvfp
		1174	82 fill_osr_press_settings:
		1175	83 .LVL2:
		1176	84 .LFB18:
		1177	1038:../libBME280/src/bme280.c ****
		1178	1039:../libBME280/src/bme280.c **** /*!
		1179	1040:../libBME280/src/bme280.c **** * @brief This internal API fills the pressure oversampling settings provided by
		1180	1041:../libBME280/src/bme280.c **** * the user in the data buffer so as to write in the sensor.
		1181	1042:../libBME280/src/bme280.c **** */
		1182	1043:../libBME280/src/bme280.c **** static void fill_osr_press_settings(uint8_t reg_data, const struct bme280_settings settings)
		1183	1044:../libBME280/src/bme280.c **** {
		1184	85 .loc 1 1044 1 is_stmt 1 view -0
		1185	86 .cfi_startproc
		1186	87 @ args = 0, pretend = 0, frame = 0
		1187	88 @ frame_needed = 0, uses_anonymous_args = 0
		1188	89 @ link register save eliminated.
		1189	1045:../libBME280/src/bme280.c **** reg_data = BME280_SET_BITS(reg_data, BME280_CTRL_PRESS, settings->osr_p);
		1190	90 .loc 1 1045 5 view .LVU11
		1191	91 .loc 1 1045 17 is_stmt 0 view .LVU12
		1192	92 0000 90F90030 ldrsb r3, [r0]
		1193	93 0004 23F01C03 bic r3, r3, #28
		1194	94 0008 0A78 ldrb r2, [r1] @ zero_extendqisi2
		1195	95 000a 9200 lsls r2, r2, #2
		1196	96 000c 02F01C02 and r2, r2, #28
		1197	97 0010 1343 orrs r3, r3, r2
		1198	98 .loc 1 1045 15 view .LVU13
		1199	99 0012 0370 strb r3, [r0]
		1200	1046:../libBME280/src/bme280.c **** }
		1201	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 21
		1202
		1203
		1204	100 .loc 1 1046 1 view .LVU14
		1205	101 0014 7047 bx lr
		1206	102 .cfi_endproc
		1207	103 .LFE18:
		1208	105 .section .text.fill_osr_temp_settings,"ax",%progbits
		1209	106 .align 1
		1210	107 .syntax unified
		1211	108 .thumb
		1212	109 .thumb_func
		1213	110 .fpu softvfp
		1214	112 fill_osr_temp_settings:
		1215	113 .LVL3:
		1216	114 .LFB19:
		1217	1047:../libBME280/src/bme280.c ****
		1218	1048:../libBME280/src/bme280.c **** /*!
		1219	1049:../libBME280/src/bme280.c **** * @brief This internal API fills the temperature oversampling settings
		1220	1050:../libBME280/src/bme280.c **** * provided by the user in the data buffer so as to write in the sensor.
		1221	1051:../libBME280/src/bme280.c **** */
		1222	1052:../libBME280/src/bme280.c **** static void fill_osr_temp_settings(uint8_t reg_data, const struct bme280_settings settings)
		1223	1053:../libBME280/src/bme280.c **** {
		1224	115 .loc 1 1053 1 is_stmt 1 view -0
		1225	116 .cfi_startproc
		1226	117 @ args = 0, pretend = 0, frame = 0
		1227	118 @ frame_needed = 0, uses_anonymous_args = 0
		1228	119 @ link register save eliminated.
		1229	1054:../libBME280/src/bme280.c **** reg_data = BME280_SET_BITS(reg_data, BME280_CTRL_TEMP, settings->osr_t);
		1230	120 .loc 1 1054 5 view .LVU16
		1231	121 .loc 1 1054 17 is_stmt 0 view .LVU17
		1232	122 0000 90F90030 ldrsb r3, [r0]
		1233	123 0004 03F01F03 and r3, r3, #31
		1234	124 0008 4A78 ldrb r2, [r1, #1] @ zero_extendqisi2
		1235	125 000a 43EA4213 orr r3, r3, r2, lsl #5
		1236	126 .loc 1 1054 15 view .LVU18
		1237	127 000e 0370 strb r3, [r0]
		1238	1055:../libBME280/src/bme280.c **** }
		1239	128 .loc 1 1055 1 view .LVU19
		1240	129 0010 7047 bx lr
		1241	130 .cfi_endproc
		1242	131 .LFE19:
		1243	133 .section .text.parse_device_settings,"ax",%progbits
		1244	134 .align 1
		1245	135 .syntax unified
		1246	136 .thumb
		1247	137 .thumb_func
		1248	138 .fpu softvfp
		1249	140 parse_device_settings:
		1250	141 .LVL4:
		1251	142 .LFB20:
		1252	1056:../libBME280/src/bme280.c ****
		1253	1057:../libBME280/src/bme280.c **** /*!
		1254	1058:../libBME280/src/bme280.c **** * @brief This internal API parse the oversampling(pressure, temperature
		1255	1059:../libBME280/src/bme280.c **** * and humidity), filter and standby duration settings and store in the
		1256	1060:../libBME280/src/bme280.c **** * device structure.
		1257	1061:../libBME280/src/bme280.c **** */
		1258	1062:../libBME280/src/bme280.c **** static void parse_device_settings(const uint8_t reg_data, struct bme280_settings settings)
		1259	1063:../libBME280/src/bme280.c **** {
		1260	143 .loc 1 1063 1 is_stmt 1 view -0
		1261	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 22
		1262
		1263
		1264	144 .cfi_startproc
		1265	145 @ args = 0, pretend = 0, frame = 0
		1266	146 @ frame_needed = 0, uses_anonymous_args = 0
		1267	147 @ link register save eliminated.
		1268	1064:../libBME280/src/bme280.c **** settings->osr_h = BME280_GET_BITS_POS_0(reg_data[0], BME280_CTRL_HUM);
		1269	148 .loc 1 1064 5 view .LVU21
		1270	149 .loc 1 1064 23 is_stmt 0 view .LVU22
		1271	150 0000 0378 ldrb r3, [r0] @ zero_extendqisi2
		1272	151 0002 03F00703 and r3, r3, #7
		1273	152 .loc 1 1064 21 view .LVU23
		1274	153 0006 8B70 strb r3, [r1, #2]
		1275	1065:../libBME280/src/bme280.c **** settings->osr_p = BME280_GET_BITS(reg_data[2], BME280_CTRL_PRESS);
		1276	154 .loc 1 1065 5 is_stmt 1 view .LVU24
		1277	155 .loc 1 1065 23 is_stmt 0 view .LVU25
		1278	156 0008 8378 ldrb r3, [r0, #2] @ zero_extendqisi2
		1279	157 000a C3F38203 ubfx r3, r3, #2, #3
		1280	158 .loc 1 1065 21 view .LVU26
		1281	159 000e 0B70 strb r3, [r1]
		1282	1066:../libBME280/src/bme280.c **** settings->osr_t = BME280_GET_BITS(reg_data[2], BME280_CTRL_TEMP);
		1283	160 .loc 1 1066 5 is_stmt 1 view .LVU27
		1284	161 .loc 1 1066 23 is_stmt 0 view .LVU28
		1285	162 0010 8378 ldrb r3, [r0, #2] @ zero_extendqisi2
		1286	163 0012 5B09 lsrs r3, r3, #5
		1287	164 .loc 1 1066 21 view .LVU29
		1288	165 0014 4B70 strb r3, [r1, #1]
		1289	1067:../libBME280/src/bme280.c **** settings->filter = BME280_GET_BITS(reg_data[3], BME280_FILTER);
		1290	166 .loc 1 1067 5 is_stmt 1 view .LVU30
		1291	167 .loc 1 1067 24 is_stmt 0 view .LVU31
		1292	168 0016 C378 ldrb r3, [r0, #3] @ zero_extendqisi2
		1293	169 0018 C3F38203 ubfx r3, r3, #2, #3
		1294	170 .loc 1 1067 22 view .LVU32
		1295	171 001c CB70 strb r3, [r1, #3]
		1296	1068:../libBME280/src/bme280.c **** settings->standby_time = BME280_GET_BITS(reg_data[3], BME280_STANDBY);
		1297	172 .loc 1 1068 5 is_stmt 1 view .LVU33
		1298	173 .loc 1 1068 30 is_stmt 0 view .LVU34
		1299	174 001e C378 ldrb r3, [r0, #3] @ zero_extendqisi2
		1300	175 0020 5B09 lsrs r3, r3, #5
		1301	176 .loc 1 1068 28 view .LVU35
		1302	177 0022 0B71 strb r3, [r1, #4]
		1303	1069:../libBME280/src/bme280.c **** }
		1304	178 .loc 1 1069 1 view .LVU36
		1305	179 0024 7047 bx lr
		1306	180 .cfi_endproc
		1307	181 .LFE20:
		1308	183 .global __aeabi_ui2d
		1309	184 .global __aeabi_dmul
		1310	185 .global __aeabi_dsub
		1311	186 .global __aeabi_i2d
		1312	187 .global __aeabi_dadd
		1313	188 .global __aeabi_d2iz
		1314	189 .global __aeabi_ddiv
		1315	190 .global __aeabi_dcmplt
		1316	191 .global __aeabi_dcmpgt
		1317	192 .section .text.compensate_temperature,"ax",%progbits
		1318	193 .align 1
		1319	194 .syntax unified
		1320	195 .thumb
		1321	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 23
		1322
		1323
		1324	196 .thumb_func
		1325	197 .fpu softvfp
		1326	199 compensate_temperature:
		1327	200 .LVL5:
		1328	201 .LFB24:
		1329	1070:../libBME280/src/bme280.c ****
		1330	1071:../libBME280/src/bme280.c **** /*!
		1331	1072:../libBME280/src/bme280.c **** * @brief This internal API writes the power mode in the sensor.
		1332	1073:../libBME280/src/bme280.c **** */
		1333	1074:../libBME280/src/bme280.c **** static int8_t write_power_mode(uint8_t sensor_mode, struct bme280_dev *dev)
		1334	1075:../libBME280/src/bme280.c **** {
		1335	1076:../libBME280/src/bme280.c **** int8_t rslt;
		1336	1077:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_PWR_CTRL_ADDR;
		1337	1078:../libBME280/src/bme280.c ****
		1338	1079:../libBME280/src/bme280.c **** /* Variable to store the value read from power mode register */
		1339	1080:../libBME280/src/bme280.c **** uint8_t sensor_mode_reg_val;
		1340	1081:../libBME280/src/bme280.c ****
		1341	1082:../libBME280/src/bme280.c **** /* Read the power mode register */
		1342	1083:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, &sensor_mode_reg_val, 1, dev);
		1343	1084:../libBME280/src/bme280.c ****
		1344	1085:../libBME280/src/bme280.c **** /* Set the power mode */
		1345	1086:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		1346	1087:../libBME280/src/bme280.c **** {
		1347	1088:../libBME280/src/bme280.c **** sensor_mode_reg_val = BME280_SET_BITS_POS_0(sensor_mode_reg_val, BME280_SENSOR_MODE, sensor
		1348	1089:../libBME280/src/bme280.c ****
		1349	1090:../libBME280/src/bme280.c **** /* Write the power mode in the register */
		1350	1091:../libBME280/src/bme280.c **** rslt = bme280_set_regs(&reg_addr, &sensor_mode_reg_val, 1, dev);
		1351	1092:../libBME280/src/bme280.c **** }
		1352	1093:../libBME280/src/bme280.c ****
		1353	1094:../libBME280/src/bme280.c **** return rslt;
		1354	1095:../libBME280/src/bme280.c **** }
		1355	1096:../libBME280/src/bme280.c ****
		1356	1097:../libBME280/src/bme280.c **** /*!
		1357	1098:../libBME280/src/bme280.c **** * @brief This internal API puts the device to sleep mode.
		1358	1099:../libBME280/src/bme280.c **** */
		1359	1100:../libBME280/src/bme280.c **** static int8_t put_device_to_sleep(struct bme280_dev *dev)
		1360	1101:../libBME280/src/bme280.c **** {
		1361	1102:../libBME280/src/bme280.c **** int8_t rslt;
		1362	1103:../libBME280/src/bme280.c **** uint8_t reg_data[4];
		1363	1104:../libBME280/src/bme280.c **** struct bme280_settings settings;
		1364	1105:../libBME280/src/bme280.c ****
		1365	1106:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_CTRL_HUM_ADDR, reg_data, 4, dev);
		1366	1107:../libBME280/src/bme280.c ****
		1367	1108:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		1368	1109:../libBME280/src/bme280.c **** {
		1369	1110:../libBME280/src/bme280.c **** parse_device_settings(reg_data, &settings);
		1370	1111:../libBME280/src/bme280.c **** rslt = bme280_soft_reset(dev);
		1371	1112:../libBME280/src/bme280.c ****
		1372	1113:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		1373	1114:../libBME280/src/bme280.c **** {
		1374	1115:../libBME280/src/bme280.c **** rslt = reload_device_settings(&settings, dev);
		1375	1116:../libBME280/src/bme280.c **** }
		1376	1117:../libBME280/src/bme280.c **** }
		1377	1118:../libBME280/src/bme280.c ****
		1378	1119:../libBME280/src/bme280.c **** return rslt;
		1379	1120:../libBME280/src/bme280.c **** }
		1380	1121:../libBME280/src/bme280.c ****
		1381	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 24
		1382
		1383
		1384	1122:../libBME280/src/bme280.c **** /*!
		1385	1123:../libBME280/src/bme280.c **** * @brief This internal API reloads the already existing device settings in
		1386	1124:../libBME280/src/bme280.c **** * the sensor after soft reset.
		1387	1125:../libBME280/src/bme280.c **** */
		1388	1126:../libBME280/src/bme280.c **** static int8_t reload_device_settings(const struct bme280_settings settings, struct bme280_dev dev
		1389	1127:../libBME280/src/bme280.c **** {
		1390	1128:../libBME280/src/bme280.c **** int8_t rslt;
		1391	1129:../libBME280/src/bme280.c ****
		1392	1130:../libBME280/src/bme280.c **** rslt = set_osr_settings(BME280_ALL_SETTINGS_SEL, settings, dev);
		1393	1131:../libBME280/src/bme280.c ****
		1394	1132:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		1395	1133:../libBME280/src/bme280.c **** {
		1396	1134:../libBME280/src/bme280.c **** rslt = set_filter_standby_settings(BME280_ALL_SETTINGS_SEL, settings, dev);
		1397	1135:../libBME280/src/bme280.c **** }
		1398	1136:../libBME280/src/bme280.c ****
		1399	1137:../libBME280/src/bme280.c **** return rslt;
		1400	1138:../libBME280/src/bme280.c **** }
		1401	1139:../libBME280/src/bme280.c ****
		1402	1140:../libBME280/src/bme280.c **** #ifdef BME280_FLOAT_ENABLE
		1403	1141:../libBME280/src/bme280.c ****
		1404	1142:../libBME280/src/bme280.c **** /*!
		1405	1143:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw temperature data and
		1406	1144:../libBME280/src/bme280.c **** * return the compensated temperature data in double data type.
		1407	1145:../libBME280/src/bme280.c **** */
		1408	1146:../libBME280/src/bme280.c **** static double compensate_temperature(const struct bme280_uncomp_data *uncomp_data, struct bme280_ca
		1409	1147:../libBME280/src/bme280.c **** {
		1410	202 .loc 1 1147 1 is_stmt 1 view -0
		1411	203 .cfi_startproc
		1412	204 @ args = 0, pretend = 0, frame = 0
		1413	205 @ frame_needed = 0, uses_anonymous_args = 0
		1414	206 .loc 1 1147 1 is_stmt 0 view .LVU38
		1415	207 0000 2DE9F84F push {r3, r4, r5, r6, r7, r8, r9, r10, fp, lr}
		1416	208 .LCFI0:
		1417	209 .cfi_def_cfa_offset 40
		1418	210 .cfi_offset 3, -40
		1419	211 .cfi_offset 4, -36
		1420	212 .cfi_offset 5, -32
		1421	213 .cfi_offset 6, -28
		1422	214 .cfi_offset 7, -24
		1423	215 .cfi_offset 8, -20
		1424	216 .cfi_offset 9, -16
		1425	217 .cfi_offset 10, -12
		1426	218 .cfi_offset 11, -8
		1427	219 .cfi_offset 14, -4
		1428	220 0004 0C46 mov r4, r1
		1429	1148:../libBME280/src/bme280.c **** double var1;
		1430	221 .loc 1 1148 5 is_stmt 1 view .LVU39
		1431	1149:../libBME280/src/bme280.c **** double var2;
		1432	222 .loc 1 1149 5 view .LVU40
		1433	1150:../libBME280/src/bme280.c **** double temperature;
		1434	223 .loc 1 1150 5 view .LVU41
		1435	1151:../libBME280/src/bme280.c **** double temperature_min = -40;
		1436	224 .loc 1 1151 5 view .LVU42
		1437	225 .LVL6:
		1438	1152:../libBME280/src/bme280.c **** double temperature_max = 85;
		1439	226 .loc 1 1152 5 view .LVU43
		1440	1153:../libBME280/src/bme280.c ****
		1441	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 25
		1442
		1443
		1444	1154:../libBME280/src/bme280.c **** var1 = ((double)uncomp_data->temperature) / 16384.0 - ((double)calib_data->dig_t1) / 1024.0;
		1445	227 .loc 1 1154 5 view .LVU44
		1446	228 .loc 1 1154 13 is_stmt 0 view .LVU45
		1447	229 0006 4068 ldr r0, [r0, #4]
		1448	230 .LVL7:
		1449	231 .loc 1 1154 13 view .LVU46
		1450	232 0008 FFF7FEFF bl __aeabi_ui2d
		1451	233 .LVL8:
		1452	234 .loc 1 1154 13 view .LVU47
		1453	235 000c 8046 mov r8, r0
		1454	236 000e 8946 mov r9, r1
		1455	237 .loc 1 1154 47 view .LVU48
		1456	238 0010 0022 movs r2, #0
		1457	239 0012 364B ldr r3, .L11
		1458	240 0014 FFF7FEFF bl __aeabi_dmul
		1459	241 .LVL9:
		1460	242 0018 0646 mov r6, r0
		1461	243 001a 0F46 mov r7, r1
		1462	244 .loc 1 1154 60 view .LVU49
		1463	245 001c 2088 ldrh r0, [r4]
		1464	246 001e FFF7FEFF bl __aeabi_ui2d
		1465	247 .LVL10:
		1466	248 0022 8246 mov r10, r0
		1467	249 0024 8B46 mov fp, r1
		1468	250 .loc 1 1154 88 view .LVU50
		1469	251 0026 0022 movs r2, #0
		1470	252 0028 314B ldr r3, .L11+4
		1471	253 002a FFF7FEFF bl __aeabi_dmul
		1472	254 .LVL11:
		1473	255 .loc 1 1154 10 view .LVU51
		1474	256 002e 0246 mov r2, r0
		1475	257 0030 0B46 mov r3, r1
		1476	258 0032 3046 mov r0, r6
		1477	259 0034 3946 mov r1, r7
		1478	260 0036 FFF7FEFF bl __aeabi_dsub
		1479	261 .LVL12:
		1480	262 003a 0646 mov r6, r0
		1481	263 003c 0F46 mov r7, r1
		1482	264 .LVL13:
		1483	1155:../libBME280/src/bme280.c **** var1 = var1 * ((double)calib_data->dig_t2);
		1484	265 .loc 1 1155 5 is_stmt 1 view .LVU52
		1485	266 .loc 1 1155 20 is_stmt 0 view .LVU53
		1486	267 003e B4F90200 ldrsh r0, [r4, #2]
		1487	268 0042 FFF7FEFF bl __aeabi_i2d
		1488	269 .LVL14:
		1489	270 .loc 1 1155 10 view .LVU54
		1490	271 0046 3246 mov r2, r6
		1491	272 0048 3B46 mov r3, r7
		1492	273 004a FFF7FEFF bl __aeabi_dmul
		1493	274 .LVL15:
		1494	275 004e 0646 mov r6, r0
		1495	276 .LVL16:
		1496	277 .loc 1 1155 10 view .LVU55
		1497	278 0050 0F46 mov r7, r1
		1498	279 .LVL17:
		1499	1156:../libBME280/src/bme280.c **** var2 = (((double)uncomp_data->temperature) / 131072.0 - ((double)calib_data->dig_t1) / 8192.0);
		1500	280 .loc 1 1156 5 is_stmt 1 view .LVU56
		1501	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 26
		1502
		1503
		1504	281 .loc 1 1156 48 is_stmt 0 view .LVU57
		1505	282 0052 0022 movs r2, #0
		1506	283 0054 274B ldr r3, .L11+8
		1507	284 0056 4046 mov r0, r8
		1508	285 0058 4946 mov r1, r9
		1509	286 005a FFF7FEFF bl __aeabi_dmul
		1510	287 .LVL18:
		1511	288 005e 8046 mov r8, r0
		1512	289 0060 8946 mov r9, r1
		1513	290 .loc 1 1156 90 view .LVU58
		1514	291 0062 0022 movs r2, #0
		1515	292 0064 244B ldr r3, .L11+12
		1516	293 0066 5046 mov r0, r10
		1517	294 0068 5946 mov r1, fp
		1518	295 006a FFF7FEFF bl __aeabi_dmul
		1519	296 .LVL19:
		1520	297 .loc 1 1156 10 view .LVU59
		1521	298 006e 0246 mov r2, r0
		1522	299 0070 0B46 mov r3, r1
		1523	300 0072 4046 mov r0, r8
		1524	301 0074 4946 mov r1, r9
		1525	302 0076 FFF7FEFF bl __aeabi_dsub
		1526	303 .LVL20:
		1527	1157:../libBME280/src/bme280.c **** var2 = (var2 * var2) * ((double)calib_data->dig_t3);
		1528	304 .loc 1 1157 5 is_stmt 1 view .LVU60
		1529	305 .loc 1 1157 18 is_stmt 0 view .LVU61
		1530	306 007a 0246 mov r2, r0
		1531	307 007c 0B46 mov r3, r1
		1532	308 007e FFF7FEFF bl __aeabi_dmul
		1533	309 .LVL21:
		1534	310 .loc 1 1157 18 view .LVU62
		1535	311 0082 8046 mov r8, r0
		1536	312 0084 8946 mov r9, r1
		1537	313 .loc 1 1157 29 view .LVU63
		1538	314 0086 B4F90400 ldrsh r0, [r4, #4]
		1539	315 008a FFF7FEFF bl __aeabi_i2d
		1540	316 .LVL22:
		1541	317 .loc 1 1157 10 view .LVU64
		1542	318 008e 0246 mov r2, r0
		1543	319 0090 0B46 mov r3, r1
		1544	320 0092 4046 mov r0, r8
		1545	321 0094 4946 mov r1, r9
		1546	322 0096 FFF7FEFF bl __aeabi_dmul
		1547	323 .LVL23:
		1548	1158:../libBME280/src/bme280.c **** calib_data->t_fine = (int32_t)(var1 + var2);
		1549	324 .loc 1 1158 5 is_stmt 1 view .LVU65
		1550	325 .loc 1 1158 41 is_stmt 0 view .LVU66
		1551	326 009a 0246 mov r2, r0
		1552	327 009c 0B46 mov r3, r1
		1553	328 009e 3046 mov r0, r6
		1554	329 .LVL24:
		1555	330 .loc 1 1158 41 view .LVU67
		1556	331 00a0 3946 mov r1, r7
		1557	332 00a2 FFF7FEFF bl __aeabi_dadd
		1558	333 .LVL25:
		1559	334 00a6 0646 mov r6, r0
		1560	335 .LVL26:
		1561	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 27
		1562
		1563
		1564	336 .loc 1 1158 41 view .LVU68
		1565	337 00a8 0F46 mov r7, r1
		1566	338 .loc 1 1158 26 view .LVU69
		1567	339 00aa FFF7FEFF bl __aeabi_d2iz
		1568	340 .LVL27:
		1569	341 .loc 1 1158 24 view .LVU70
		1570	342 00ae 6062 str r0, [r4, #36]
		1571	1159:../libBME280/src/bme280.c **** temperature = (var1 + var2) / 5120.0;
		1572	343 .loc 1 1159 5 is_stmt 1 view .LVU71
		1573	344 .loc 1 1159 17 is_stmt 0 view .LVU72
		1574	345 00b0 0022 movs r2, #0
		1575	346 00b2 124B ldr r3, .L11+16
		1576	347 00b4 3046 mov r0, r6
		1577	348 00b6 3946 mov r1, r7
		1578	349 00b8 FFF7FEFF bl __aeabi_ddiv
		1579	350 .LVL28:
		1580	351 00bc 0446 mov r4, r0
		1581	352 .LVL29:
		1582	353 .loc 1 1159 17 view .LVU73
		1583	354 00be 0D46 mov r5, r1
		1584	355 .LVL30:
		1585	1160:../libBME280/src/bme280.c ****
		1586	1161:../libBME280/src/bme280.c **** if (temperature < temperature_min)
		1587	356 .loc 1 1161 5 is_stmt 1 view .LVU74
		1588	357 .loc 1 1161 8 is_stmt 0 view .LVU75
		1589	358 00c0 0022 movs r2, #0
		1590	359 00c2 0F4B ldr r3, .L11+20
		1591	360 00c4 FFF7FEFF bl __aeabi_dcmplt
		1592	361 .LVL31:
		1593	362 00c8 48B9 cbnz r0, .L8
		1594	1162:../libBME280/src/bme280.c **** {
		1595	1163:../libBME280/src/bme280.c **** temperature = temperature_min;
		1596	1164:../libBME280/src/bme280.c **** }
		1597	1165:../libBME280/src/bme280.c **** else if (temperature > temperature_max)
		1598	363 .loc 1 1165 10 is_stmt 1 view .LVU76
		1599	364 .loc 1 1165 13 is_stmt 0 view .LVU77
		1600	365 00ca 0022 movs r2, #0
		1601	366 00cc 0D4B ldr r3, .L11+24
		1602	367 00ce 2046 mov r0, r4
		1603	368 00d0 2946 mov r1, r5
		1604	369 00d2 FFF7FEFF bl __aeabi_dcmpgt
		1605	370 .LVL32:
		1606	371 00d6 20B1 cbz r0, .L6
		1607	1166:../libBME280/src/bme280.c **** {
		1608	1167:../libBME280/src/bme280.c **** temperature = temperature_max;
		1609	372 .loc 1 1167 21 view .LVU78
		1610	373 00d8 0024 movs r4, #0
		1611	374 .LVL33:
		1612	375 .loc 1 1167 21 view .LVU79
		1613	376 00da 0A4D ldr r5, .L11+24
		1614	377 .LVL34:
		1615	1168:../libBME280/src/bme280.c **** }
		1616	1169:../libBME280/src/bme280.c ****
		1617	1170:../libBME280/src/bme280.c **** return temperature;
		1618	378 .loc 1 1170 5 is_stmt 1 view .LVU80
		1619	379 .loc 1 1170 12 is_stmt 0 view .LVU81
		1620	380 00dc 01E0 b .L6
		1621	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 28
		1622
		1623
		1624	381 .LVL35:
		1625	382 .L8:
		1626	1163:../libBME280/src/bme280.c **** }
		1627	383 .loc 1 1163 21 view .LVU82
		1628	384 00de 0024 movs r4, #0
		1629	385 .LVL36:
		1630	1163:../libBME280/src/bme280.c **** }
		1631	386 .loc 1 1163 21 view .LVU83
		1632	387 00e0 074D ldr r5, .L11+20
		1633	388 .L6:
		1634	1171:../libBME280/src/bme280.c **** }
		1635	389 .loc 1 1171 1 view .LVU84
		1636	390 00e2 2046 mov r0, r4
		1637	391 00e4 2946 mov r1, r5
		1638	392 00e6 BDE8F88F pop {r3, r4, r5, r6, r7, r8, r9, r10, fp, pc}
		1639	393 .L12:
		1640	394 00ea 00BF .align 2
		1641	395 .L11:
		1642	396 00ec 0000103F .word 1058013184
		1643	397 00f0 0000503F .word 1062207488
		1644	398 00f4 0000E03E .word 1054867456
		1645	399 00f8 0000203F .word 1059061760
		1646	400 00fc 0000B440 .word 1085538304
		1647	401 0100 000044C0 .word -1069285376
		1648	402 0104 00405540 .word 1079328768
		1649	403 .cfi_endproc
		1650	404 .LFE24:
		1651	406 .section .text.compensate_pressure,"ax",%progbits
		1652	407 .align 1
		1653	408 .syntax unified
		1654	409 .thumb
		1655	410 .thumb_func
		1656	411 .fpu softvfp
		1657	413 compensate_pressure:
		1658	414 .LVL37:
		1659	415 .LFB25:
		1660	1172:../libBME280/src/bme280.c ****
		1661	1173:../libBME280/src/bme280.c **** /*!
		1662	1174:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw pressure data and
		1663	1175:../libBME280/src/bme280.c **** * return the compensated pressure data in double data type.
		1664	1176:../libBME280/src/bme280.c **** */
		1665	1177:../libBME280/src/bme280.c **** static double compensate_pressure(const struct bme280_uncomp_data *uncomp_data,
		1666	1178:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data)
		1667	1179:../libBME280/src/bme280.c **** {
		1668	416 .loc 1 1179 1 is_stmt 1 view -0
		1669	417 .cfi_startproc
		1670	418 @ args = 0, pretend = 0, frame = 0
		1671	419 @ frame_needed = 0, uses_anonymous_args = 0
		1672	420 .loc 1 1179 1 is_stmt 0 view .LVU86
		1673	421 0000 2DE9F84F push {r3, r4, r5, r6, r7, r8, r9, r10, fp, lr}
		1674	422 .LCFI1:
		1675	423 .cfi_def_cfa_offset 40
		1676	424 .cfi_offset 3, -40
		1677	425 .cfi_offset 4, -36
		1678	426 .cfi_offset 5, -32
		1679	427 .cfi_offset 6, -28
		1680	428 .cfi_offset 7, -24
		1681	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 29
		1682
		1683
		1684	429 .cfi_offset 8, -20
		1685	430 .cfi_offset 9, -16
		1686	431 .cfi_offset 10, -12
		1687	432 .cfi_offset 11, -8
		1688	433 .cfi_offset 14, -4
		1689	434 0004 0546 mov r5, r0
		1690	435 0006 0C46 mov r4, r1
		1691	1180:../libBME280/src/bme280.c **** double var1;
		1692	436 .loc 1 1180 5 is_stmt 1 view .LVU87
		1693	1181:../libBME280/src/bme280.c **** double var2;
		1694	437 .loc 1 1181 5 view .LVU88
		1695	1182:../libBME280/src/bme280.c **** double var3;
		1696	438 .loc 1 1182 5 view .LVU89
		1697	1183:../libBME280/src/bme280.c **** double pressure;
		1698	439 .loc 1 1183 5 view .LVU90
		1699	1184:../libBME280/src/bme280.c **** double pressure_min = 30000.0;
		1700	440 .loc 1 1184 5 view .LVU91
		1701	441 .LVL38:
		1702	1185:../libBME280/src/bme280.c **** double pressure_max = 110000.0;
		1703	442 .loc 1 1185 5 view .LVU92
		1704	1186:../libBME280/src/bme280.c ****
		1705	1187:../libBME280/src/bme280.c **** var1 = ((double)calib_data->t_fine / 2.0) - 64000.0;
		1706	443 .loc 1 1187 5 view .LVU93
		1707	444 .loc 1 1187 13 is_stmt 0 view .LVU94
		1708	445 0008 486A ldr r0, [r1, #36]
		1709	446 .LVL39:
		1710	447 .loc 1 1187 13 view .LVU95
		1711	448 000a FFF7FEFF bl __aeabi_i2d
		1712	449 .LVL40:
		1713	450 .loc 1 1187 40 view .LVU96
		1714	451 000e 0022 movs r2, #0
		1715	452 0010 874B ldr r3, .L22+24
		1716	453 0012 FFF7FEFF bl __aeabi_dmul
		1717	454 .LVL41:
		1718	455 .loc 1 1187 10 view .LVU97
		1719	456 0016 0022 movs r2, #0
		1720	457 0018 864B ldr r3, .L22+28
		1721	458 001a FFF7FEFF bl __aeabi_dsub
		1722	459 .LVL42:
		1723	460 001e 0646 mov r6, r0
		1724	461 0020 0F46 mov r7, r1
		1725	462 .LVL43:
		1726	1188:../libBME280/src/bme280.c **** var2 = var1 * var1 * ((double)calib_data->dig_p6) / 32768.0;
		1727	463 .loc 1 1188 5 is_stmt 1 view .LVU98
		1728	464 .loc 1 1188 17 is_stmt 0 view .LVU99
		1729	465 0022 0246 mov r2, r0
		1730	466 0024 0B46 mov r3, r1
		1731	467 0026 FFF7FEFF bl __aeabi_dmul
		1732	468 .LVL44:
		1733	469 002a 8046 mov r8, r0
		1734	470 002c 8946 mov r9, r1
		1735	471 .loc 1 1188 27 view .LVU100
		1736	472 002e B4F91000 ldrsh r0, [r4, #16]
		1737	473 0032 FFF7FEFF bl __aeabi_i2d
		1738	474 .LVL45:
		1739	475 .loc 1 1188 24 view .LVU101
		1740	476 0036 0246 mov r2, r0
		1741	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 30
		1742
		1743
		1744	477 0038 0B46 mov r3, r1
		1745	478 003a 4046 mov r0, r8
		1746	479 003c 4946 mov r1, r9
		1747	480 003e FFF7FEFF bl __aeabi_dmul
		1748	481 .LVL46:
		1749	482 .loc 1 1188 10 view .LVU102
		1750	483 0042 0022 movs r2, #0
		1751	484 0044 4FF07C53 mov r3, #1056964608
		1752	485 0048 FFF7FEFF bl __aeabi_dmul
		1753	486 .LVL47:
		1754	487 004c 8046 mov r8, r0
		1755	488 004e 8946 mov r9, r1
		1756	489 .LVL48:
		1757	1189:../libBME280/src/bme280.c **** var2 = var2 + var1 * ((double)calib_data->dig_p5) * 2.0;
		1758	490 .loc 1 1189 5 is_stmt 1 view .LVU103
		1759	491 .loc 1 1189 27 is_stmt 0 view .LVU104
		1760	492 0050 B4F90E00 ldrsh r0, [r4, #14]
		1761	493 0054 FFF7FEFF bl __aeabi_i2d
		1762	494 .LVL49:
		1763	495 .loc 1 1189 24 view .LVU105
		1764	496 0058 3246 mov r2, r6
		1765	497 005a 3B46 mov r3, r7
		1766	498 005c FFF7FEFF bl __aeabi_dmul
		1767	499 .LVL50:
		1768	500 .loc 1 1189 55 view .LVU106
		1769	501 0060 0246 mov r2, r0
		1770	502 0062 0B46 mov r3, r1
		1771	503 0064 FFF7FEFF bl __aeabi_dadd
		1772	504 .LVL51:
		1773	505 .loc 1 1189 10 view .LVU107
		1774	506 0068 4246 mov r2, r8
		1775	507 006a 4B46 mov r3, r9
		1776	508 006c FFF7FEFF bl __aeabi_dadd
		1777	509 .LVL52:
		1778	1190:../libBME280/src/bme280.c **** var2 = (var2 / 4.0) + (((double)calib_data->dig_p4) * 65536.0);
		1779	510 .loc 1 1190 5 is_stmt 1 view .LVU108
		1780	511 .loc 1 1190 18 is_stmt 0 view .LVU109
		1781	512 0070 0022 movs r2, #0
		1782	513 0072 714B ldr r3, .L22+32
		1783	514 0074 FFF7FEFF bl __aeabi_dmul
		1784	515 .LVL53:
		1785	516 .loc 1 1190 18 view .LVU110
		1786	517 0078 8046 mov r8, r0
		1787	518 007a 8946 mov r9, r1
		1788	519 .loc 1 1190 29 view .LVU111
		1789	520 007c B4F90C00 ldrsh r0, [r4, #12]
		1790	521 0080 FFF7FEFF bl __aeabi_i2d
		1791	522 .LVL54:
		1792	523 .loc 1 1190 57 view .LVU112
		1793	524 0084 0022 movs r2, #0
		1794	525 0086 6D4B ldr r3, .L22+36
		1795	526 0088 FFF7FEFF bl __aeabi_dmul
		1796	527 .LVL55:
		1797	528 .loc 1 1190 10 view .LVU113
		1798	529 008c 0246 mov r2, r0
		1799	530 008e 0B46 mov r3, r1
		1800	531 0090 4046 mov r0, r8
		1801	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 31
		1802
		1803
		1804	532 0092 4946 mov r1, r9
		1805	533 0094 FFF7FEFF bl __aeabi_dadd
		1806	534 .LVL56:
		1807	535 0098 8046 mov r8, r0
		1808	536 009a 8946 mov r9, r1
		1809	537 .LVL57:
		1810	1191:../libBME280/src/bme280.c **** var3 = ((double)calib_data->dig_p3) * var1 * var1 / 524288.0;
		1811	538 .loc 1 1191 5 is_stmt 1 view .LVU114
		1812	539 .loc 1 1191 13 is_stmt 0 view .LVU115
		1813	540 009c B4F90A00 ldrsh r0, [r4, #10]
		1814	541 00a0 FFF7FEFF bl __aeabi_i2d
		1815	542 .LVL58:
		1816	543 .loc 1 1191 41 view .LVU116
		1817	544 00a4 3246 mov r2, r6
		1818	545 00a6 3B46 mov r3, r7
		1819	546 00a8 FFF7FEFF bl __aeabi_dmul
		1820	547 .LVL59:
		1821	548 .loc 1 1191 48 view .LVU117
		1822	549 00ac 3246 mov r2, r6
		1823	550 00ae 3B46 mov r3, r7
		1824	551 00b0 FFF7FEFF bl __aeabi_dmul
		1825	552 .LVL60:
		1826	553 .loc 1 1191 10 view .LVU118
		1827	554 00b4 0022 movs r2, #0
		1828	555 00b6 4FF07B53 mov r3, #1052770304
		1829	556 00ba FFF7FEFF bl __aeabi_dmul
		1830	557 .LVL61:
		1831	558 00be 8246 mov r10, r0
		1832	559 00c0 8B46 mov fp, r1
		1833	560 .LVL62:
		1834	1192:../libBME280/src/bme280.c **** var1 = (var3 + ((double)calib_data->dig_p2) * var1) / 524288.0;
		1835	561 .loc 1 1192 5 is_stmt 1 view .LVU119
		1836	562 .loc 1 1192 21 is_stmt 0 view .LVU120
		1837	563 00c2 B4F90800 ldrsh r0, [r4, #8]
		1838	564 00c6 FFF7FEFF bl __aeabi_i2d
		1839	565 .LVL63:
		1840	566 .loc 1 1192 49 view .LVU121
		1841	567 00ca 3246 mov r2, r6
		1842	568 00cc 3B46 mov r3, r7
		1843	569 00ce FFF7FEFF bl __aeabi_dmul
		1844	570 .LVL64:
		1845	571 .loc 1 1192 18 view .LVU122
		1846	572 00d2 5246 mov r2, r10
		1847	573 00d4 5B46 mov r3, fp
		1848	574 00d6 FFF7FEFF bl __aeabi_dadd
		1849	575 .LVL65:
		1850	576 .loc 1 1192 10 view .LVU123
		1851	577 00da 0022 movs r2, #0
		1852	578 00dc 4FF07B53 mov r3, #1052770304
		1853	579 00e0 FFF7FEFF bl __aeabi_dmul
		1854	580 .LVL66:
		1855	1193:../libBME280/src/bme280.c **** var1 = (1.0 + var1 / 32768.0) * ((double)calib_data->dig_p1);
		1856	581 .loc 1 1193 5 is_stmt 1 view .LVU124
		1857	582 .loc 1 1193 24 is_stmt 0 view .LVU125
		1858	583 00e4 0022 movs r2, #0
		1859	584 00e6 4FF07C53 mov r3, #1056964608
		1860	585 00ea FFF7FEFF bl __aeabi_dmul
		1861	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 32
		1862
		1863
		1864	586 .LVL67:
		1865	587 .loc 1 1193 17 view .LVU126
		1866	588 00ee 0022 movs r2, #0
		1867	589 00f0 534B ldr r3, .L22+40
		1868	590 00f2 FFF7FEFF bl __aeabi_dadd
		1869	591 .LVL68:
		1870	592 00f6 0646 mov r6, r0
		1871	593 00f8 0F46 mov r7, r1
		1872	594 .loc 1 1193 38 view .LVU127
		1873	595 00fa E088 ldrh r0, [r4, #6]
		1874	596 00fc FFF7FEFF bl __aeabi_ui2d
		1875	597 .LVL69:
		1876	598 .loc 1 1193 10 view .LVU128
		1877	599 0100 0246 mov r2, r0
		1878	600 0102 0B46 mov r3, r1
		1879	601 0104 3046 mov r0, r6
		1880	602 0106 3946 mov r1, r7
		1881	603 0108 FFF7FEFF bl __aeabi_dmul
		1882	604 .LVL70:
		1883	605 010c 8246 mov r10, r0
		1884	606 .LVL71:
		1885	607 .loc 1 1193 10 view .LVU129
		1886	608 010e 8B46 mov fp, r1
		1887	609 .LVL72:
		1888	1194:../libBME280/src/bme280.c ****
		1889	1195:../libBME280/src/bme280.c **** /* avoid exception caused by division by zero */
		1890	1196:../libBME280/src/bme280.c **** if (var1 > (0.0))
		1891	610 .loc 1 1196 5 is_stmt 1 view .LVU130
		1892	611 .loc 1 1196 8 is_stmt 0 view .LVU131
		1893	612 0110 0022 movs r2, #0
		1894	613 0112 0023 movs r3, #0
		1895	614 0114 FFF7FEFF bl __aeabi_dcmpgt
		1896	615 .LVL73:
		1897	616 0118 0028 cmp r0, #0
		1898	617 011a 6FD0 beq .L20
		1899	1197:../libBME280/src/bme280.c **** {
		1900	1198:../libBME280/src/bme280.c **** pressure = 1048576.0 - (double) uncomp_data->pressure;
		1901	618 .loc 1 1198 9 is_stmt 1 view .LVU132
		1902	619 .loc 1 1198 32 is_stmt 0 view .LVU133
		1903	620 011c 2868 ldr r0, [r5]
		1904	621 011e FFF7FEFF bl __aeabi_ui2d
		1905	622 .LVL74:
		1906	623 .loc 1 1198 18 view .LVU134
		1907	624 0122 0246 mov r2, r0
		1908	625 0124 0B46 mov r3, r1
		1909	626 0126 0020 movs r0, #0
		1910	627 0128 4649 ldr r1, .L22+44
		1911	628 012a FFF7FEFF bl __aeabi_dsub
		1912	629 .LVL75:
		1913	630 012e 0646 mov r6, r0
		1914	631 0130 0F46 mov r7, r1
		1915	632 .LVL76:
		1916	1199:../libBME280/src/bme280.c **** pressure = (pressure - (var2 / 4096.0)) * 6250.0 / var1;
		1917	633 .loc 1 1199 9 is_stmt 1 view .LVU135
		1918	634 .loc 1 1199 38 is_stmt 0 view .LVU136
		1919	635 0132 0022 movs r2, #0
		1920	636 0134 444B ldr r3, .L22+48
		1921	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 33
		1922
		1923
		1924	637 0136 4046 mov r0, r8
		1925	638 0138 4946 mov r1, r9
		1926	639 013a FFF7FEFF bl __aeabi_dmul
		1927	640 .LVL77:
		1928	641 .loc 1 1199 30 view .LVU137
		1929	642 013e 0246 mov r2, r0
		1930	643 0140 0B46 mov r3, r1
		1931	644 0142 3046 mov r0, r6
		1932	645 0144 3946 mov r1, r7
		1933	646 0146 FFF7FEFF bl __aeabi_dsub
		1934	647 .LVL78:
		1935	648 .loc 1 1199 49 view .LVU138
		1936	649 014a 33A3 adr r3, .L22
		1937	650 014c D3E90023 ldrd r2, [r3]
		1938	651 0150 FFF7FEFF bl __aeabi_dmul
		1939	652 .LVL79:
		1940	653 .loc 1 1199 18 view .LVU139
		1941	654 0154 5246 mov r2, r10
		1942	655 0156 5B46 mov r3, fp
		1943	656 0158 FFF7FEFF bl __aeabi_ddiv
		1944	657 .LVL80:
		1945	658 015c 0646 mov r6, r0
		1946	659 .LVL81:
		1947	660 .loc 1 1199 18 view .LVU140
		1948	661 015e 0F46 mov r7, r1
		1949	662 .LVL82:
		1950	1200:../libBME280/src/bme280.c **** var1 = ((double)calib_data->dig_p9) * pressure * pressure / 2147483648.0;
		1951	663 .loc 1 1200 9 is_stmt 1 view .LVU141
		1952	664 .loc 1 1200 17 is_stmt 0 view .LVU142
		1953	665 0160 B4F91600 ldrsh r0, [r4, #22]
		1954	666 0164 FFF7FEFF bl __aeabi_i2d
		1955	667 .LVL83:
		1956	668 .loc 1 1200 45 view .LVU143
		1957	669 0168 3246 mov r2, r6
		1958	670 016a 3B46 mov r3, r7
		1959	671 016c FFF7FEFF bl __aeabi_dmul
		1960	672 .LVL84:
		1961	673 .loc 1 1200 56 view .LVU144
		1962	674 0170 3246 mov r2, r6
		1963	675 0172 3B46 mov r3, r7
		1964	676 0174 FFF7FEFF bl __aeabi_dmul
		1965	677 .LVL85:
		1966	678 .loc 1 1200 14 view .LVU145
		1967	679 0178 0022 movs r2, #0
		1968	680 017a 4FF07853 mov r3, #1040187392
		1969	681 017e FFF7FEFF bl __aeabi_dmul
		1970	682 .LVL86:
		1971	683 0182 8046 mov r8, r0
		1972	684 .LVL87:
		1973	685 .loc 1 1200 14 view .LVU146
		1974	686 0184 8946 mov r9, r1
		1975	687 .LVL88:
		1976	1201:../libBME280/src/bme280.c **** var2 = pressure * ((double)calib_data->dig_p8) / 32768.0;
		1977	688 .loc 1 1201 9 is_stmt 1 view .LVU147
		1978	689 .loc 1 1201 28 is_stmt 0 view .LVU148
		1979	690 0186 B4F91400 ldrsh r0, [r4, #20]
		1980	691 018a FFF7FEFF bl __aeabi_i2d
		1981	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 34
		1982
		1983
		1984	692 .LVL89:
		1985	693 .loc 1 1201 25 view .LVU149
		1986	694 018e 3246 mov r2, r6
		1987	695 0190 3B46 mov r3, r7
		1988	696 0192 FFF7FEFF bl __aeabi_dmul
		1989	697 .LVL90:
		1990	698 .loc 1 1201 14 view .LVU150
		1991	699 0196 0022 movs r2, #0
		1992	700 0198 4FF07C53 mov r3, #1056964608
		1993	701 019c FFF7FEFF bl __aeabi_dmul
		1994	702 .LVL91:
		1995	1202:../libBME280/src/bme280.c **** pressure = pressure + (var1 + var2 + ((double)calib_data->dig_p7)) / 16.0;
		1996	703 .loc 1 1202 9 is_stmt 1 view .LVU151
		1997	704 .loc 1 1202 37 is_stmt 0 view .LVU152
		1998	705 01a0 0246 mov r2, r0
		1999	706 01a2 0B46 mov r3, r1
		2000	707 01a4 4046 mov r0, r8
		2001	708 .LVL92:
		2002	709 .loc 1 1202 37 view .LVU153
		2003	710 01a6 4946 mov r1, r9
		2004	711 01a8 FFF7FEFF bl __aeabi_dadd
		2005	712 .LVL93:
		2006	713 01ac 8046 mov r8, r0
		2007	714 .LVL94:
		2008	715 .loc 1 1202 37 view .LVU154
		2009	716 01ae 8946 mov r9, r1
		2010	717 .loc 1 1202 47 view .LVU155
		2011	718 01b0 B4F91200 ldrsh r0, [r4, #18]
		2012	719 01b4 FFF7FEFF bl __aeabi_i2d
		2013	720 .LVL95:
		2014	721 .loc 1 1202 44 view .LVU156
		2015	722 01b8 0246 mov r2, r0
		2016	723 01ba 0B46 mov r3, r1
		2017	724 01bc 4046 mov r0, r8
		2018	725 01be 4946 mov r1, r9
		2019	726 01c0 FFF7FEFF bl __aeabi_dadd
		2020	727 .LVL96:
		2021	728 .loc 1 1202 76 view .LVU157
		2022	729 01c4 0022 movs r2, #0
		2023	730 01c6 214B ldr r3, .L22+52
		2024	731 01c8 FFF7FEFF bl __aeabi_dmul
		2025	732 .LVL97:
		2026	733 .loc 1 1202 18 view .LVU158
		2027	734 01cc 3246 mov r2, r6
		2028	735 01ce 3B46 mov r3, r7
		2029	736 01d0 FFF7FEFF bl __aeabi_dadd
		2030	737 .LVL98:
		2031	738 01d4 0446 mov r4, r0
		2032	739 .LVL99:
		2033	740 .loc 1 1202 18 view .LVU159
		2034	741 01d6 0D46 mov r5, r1
		2035	742 .LVL100:
		2036	1203:../libBME280/src/bme280.c ****
		2037	1204:../libBME280/src/bme280.c **** if (pressure < pressure_min)
		2038	743 .loc 1 1204 9 is_stmt 1 view .LVU160
		2039	744 .loc 1 1204 12 is_stmt 0 view .LVU161
		2040	745 01d8 11A3 adr r3, .L22+8
		2041	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 35
		2042
		2043
		2044	746 01da D3E90023 ldrd r2, [r3]
		2045	747 01de FFF7FEFF bl __aeabi_dcmplt
		2046	748 .LVL101:
		2047	749 01e2 90B9 cbnz r0, .L17
		2048	1205:../libBME280/src/bme280.c **** {
		2049	1206:../libBME280/src/bme280.c **** pressure = pressure_min;
		2050	1207:../libBME280/src/bme280.c **** }
		2051	1208:../libBME280/src/bme280.c **** else if (pressure > pressure_max)
		2052	750 .loc 1 1208 14 is_stmt 1 view .LVU162
		2053	751 .loc 1 1208 17 is_stmt 0 view .LVU163
		2054	752 01e4 10A3 adr r3, .L22+16
		2055	753 01e6 D3E90023 ldrd r2, [r3]
		2056	754 01ea 2046 mov r0, r4
		2057	755 01ec 2946 mov r1, r5
		2058	756 01ee FFF7FEFF bl __aeabi_dcmpgt
		2059	757 .LVL102:
		2060	758 01f2 30B1 cbz r0, .L13
		2061	1209:../libBME280/src/bme280.c **** {
		2062	1210:../libBME280/src/bme280.c **** pressure = pressure_max;
		2063	759 .loc 1 1210 22 view .LVU164
		2064	760 01f4 0CA5 adr r5, .L22+16
		2065	761 01f6 D5E90045 ldrd r4, [r5]
		2066	762 .LVL103:
		2067	1211:../libBME280/src/bme280.c **** }
		2068	1212:../libBME280/src/bme280.c **** }
		2069	1213:../libBME280/src/bme280.c **** else /* Invalid case */
		2070	1214:../libBME280/src/bme280.c **** {
		2071	1215:../libBME280/src/bme280.c **** pressure = pressure_min;
		2072	1216:../libBME280/src/bme280.c **** }
		2073	1217:../libBME280/src/bme280.c ****
		2074	1218:../libBME280/src/bme280.c **** return pressure;
		2075	763 .loc 1 1218 5 is_stmt 1 view .LVU165
		2076	764 .loc 1 1218 12 is_stmt 0 view .LVU166
		2077	765 01fa 02E0 b .L13
		2078	766 .LVL104:
		2079	767 .L20:
		2080	1215:../libBME280/src/bme280.c **** }
		2081	768 .loc 1 1215 18 view .LVU167
		2082	769 01fc 08A5 adr r5, .L22+8
		2083	770 01fe D5E90045 ldrd r4, [r5]
		2084	771 .LVL105:
		2085	772 .L13:
		2086	1219:../libBME280/src/bme280.c **** }
		2087	773 .loc 1 1219 1 view .LVU168
		2088	774 0202 2046 mov r0, r4
		2089	775 0204 2946 mov r1, r5
		2090	776 0206 BDE8F88F pop {r3, r4, r5, r6, r7, r8, r9, r10, fp, pc}
		2091	777 .LVL106:
		2092	778 .L17:
		2093	1206:../libBME280/src/bme280.c **** }
		2094	779 .loc 1 1206 22 view .LVU169
		2095	780 020a 05A5 adr r5, .L22+8
		2096	781 020c D5E90045 ldrd r4, [r5]
		2097	782 .LVL107:
		2098	1206:../libBME280/src/bme280.c **** }
		2099	783 .loc 1 1206 22 view .LVU170
		2100	784 0210 F7E7 b .L13
		2101	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 36
		2102
		2103
		2104	785 .L23:
		2105	786 0212 00BFAFF3 .align 3
		2106	786 0080
		2107	787 .L22:
		2108	788 0218 00000000 .word 0
		2109	789 021c 006AB840 .word 1085827584
		2110	790 0220 00000000 .word 0
		2111	791 0224 004CDD40 .word 1088244736
		2112	792 0228 00000000 .word 0
		2113	793 022c 00DBFA40 .word 1090181888
		2114	794 0230 0000E03F .word 1071644672
		2115	795 0234 0040EF40 .word 1089421312
		2116	796 0238 0000D03F .word 1070596096
		2117	797 023c 0000F040 .word 1089470464
		2118	798 0240 0000F03F .word 1072693248
		2119	799 0244 00003041 .word 1093664768
		2120	800 0248 0000303F .word 1060110336
		2121	801 024c 0000B03F .word 1068498944
		2122	802 .cfi_endproc
		2123	803 .LFE25:
		2124	805 .section .text.compensate_humidity,"ax",%progbits
		2125	806 .align 1
		2126	807 .syntax unified
		2127	808 .thumb
		2128	809 .thumb_func
		2129	810 .fpu softvfp
		2130	812 compensate_humidity:
		2131	813 .LVL108:
		2132	814 .LFB26:
		2133	1220:../libBME280/src/bme280.c ****
		2134	1221:../libBME280/src/bme280.c **** /*!
		2135	1222:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw humidity data and
		2136	1223:../libBME280/src/bme280.c **** * return the compensated humidity data in double data type.
		2137	1224:../libBME280/src/bme280.c **** */
		2138	1225:../libBME280/src/bme280.c **** static double compensate_humidity(const struct bme280_uncomp_data *uncomp_data,
		2139	1226:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data)
		2140	1227:../libBME280/src/bme280.c **** {
		2141	815 .loc 1 1227 1 is_stmt 1 view -0
		2142	816 .cfi_startproc
		2143	817 @ args = 0, pretend = 0, frame = 16
		2144	818 @ frame_needed = 0, uses_anonymous_args = 0
		2145	819 .loc 1 1227 1 is_stmt 0 view .LVU172
		2146	820 0000 2DE9F047 push {r4, r5, r6, r7, r8, r9, r10, lr}
		2147	821 .LCFI2:
		2148	822 .cfi_def_cfa_offset 32
		2149	823 .cfi_offset 4, -32
		2150	824 .cfi_offset 5, -28
		2151	825 .cfi_offset 6, -24
		2152	826 .cfi_offset 7, -20
		2153	827 .cfi_offset 8, -16
		2154	828 .cfi_offset 9, -12
		2155	829 .cfi_offset 10, -8
		2156	830 .cfi_offset 14, -4
		2157	831 0004 84B0 sub sp, sp, #16
		2158	832 .LCFI3:
		2159	833 .cfi_def_cfa_offset 48
		2160	834 0006 8046 mov r8, r0
		2161	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 37
		2162
		2163
		2164	835 0008 8A46 mov r10, r1
		2165	1228:../libBME280/src/bme280.c **** double humidity;
		2166	836 .loc 1 1228 5 is_stmt 1 view .LVU173
		2167	1229:../libBME280/src/bme280.c **** double humidity_min = 0.0;
		2168	837 .loc 1 1229 5 view .LVU174
		2169	838 .LVL109:
		2170	1230:../libBME280/src/bme280.c **** double humidity_max = 100.0;
		2171	839 .loc 1 1230 5 view .LVU175
		2172	1231:../libBME280/src/bme280.c **** double var1;
		2173	840 .loc 1 1231 5 view .LVU176
		2174	1232:../libBME280/src/bme280.c **** double var2;
		2175	841 .loc 1 1232 5 view .LVU177
		2176	1233:../libBME280/src/bme280.c **** double var3;
		2177	842 .loc 1 1233 5 view .LVU178
		2178	1234:../libBME280/src/bme280.c **** double var4;
		2179	843 .loc 1 1234 5 view .LVU179
		2180	1235:../libBME280/src/bme280.c **** double var5;
		2181	844 .loc 1 1235 5 view .LVU180
		2182	1236:../libBME280/src/bme280.c **** double var6;
		2183	845 .loc 1 1236 5 view .LVU181
		2184	1237:../libBME280/src/bme280.c ****
		2185	1238:../libBME280/src/bme280.c **** var1 = ((double)calib_data->t_fine) - 76800.0;
		2186	846 .loc 1 1238 5 view .LVU182
		2187	847 .loc 1 1238 13 is_stmt 0 view .LVU183
		2188	848 000a 486A ldr r0, [r1, #36]
		2189	849 .LVL110:
		2190	850 .loc 1 1238 13 view .LVU184
		2191	851 000c FFF7FEFF bl __aeabi_i2d
		2192	852 .LVL111:
		2193	853 .loc 1 1238 10 view .LVU185
		2194	854 0010 0022 movs r2, #0
		2195	855 0012 524B ldr r3, .L29
		2196	856 0014 FFF7FEFF bl __aeabi_dsub
		2197	857 .LVL112:
		2198	858 0018 0646 mov r6, r0
		2199	859 001a 0F46 mov r7, r1
		2200	860 .LVL113:
		2201	1239:../libBME280/src/bme280.c **** var2 = (((double)calib_data->dig_h4) * 64.0 + (((double)calib_data->dig_h5) / 16384.0) * var1);
		2202	861 .loc 1 1239 5 is_stmt 1 view .LVU186
		2203	862 .loc 1 1239 14 is_stmt 0 view .LVU187
		2204	863 001c BAF91E00 ldrsh r0, [r10, #30]
		2205	864 0020 FFF7FEFF bl __aeabi_i2d
		2206	865 .LVL114:
		2207	866 .loc 1 1239 42 view .LVU188
		2208	867 0024 0022 movs r2, #0
		2209	868 0026 4E4B ldr r3, .L29+4
		2210	869 0028 FFF7FEFF bl __aeabi_dmul
		2211	870 .LVL115:
		2212	871 002c 0446 mov r4, r0
		2213	872 002e 0D46 mov r5, r1
		2214	873 .loc 1 1239 53 view .LVU189
		2215	874 0030 BAF92000 ldrsh r0, [r10, #32]
		2216	875 0034 FFF7FEFF bl __aeabi_i2d
		2217	876 .LVL116:
		2218	877 .loc 1 1239 81 view .LVU190
		2219	878 0038 0022 movs r2, #0
		2220	879 003a 4A4B ldr r3, .L29+8
		2221	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 38
		2222
		2223
		2224	880 003c FFF7FEFF bl __aeabi_dmul
		2225	881 .LVL117:
		2226	882 .loc 1 1239 92 view .LVU191
		2227	883 0040 3246 mov r2, r6
		2228	884 0042 3B46 mov r3, r7
		2229	885 0044 FFF7FEFF bl __aeabi_dmul
		2230	886 .LVL118:
		2231	887 .loc 1 1239 10 view .LVU192
		2232	888 0048 0246 mov r2, r0
		2233	889 004a 0B46 mov r3, r1
		2234	890 004c 2046 mov r0, r4
		2235	891 004e 2946 mov r1, r5
		2236	892 0050 FFF7FEFF bl __aeabi_dadd
		2237	893 .LVL119:
		2238	894 0054 0446 mov r4, r0
		2239	895 0056 0D46 mov r5, r1
		2240	896 .LVL120:
		2241	1240:../libBME280/src/bme280.c **** var3 = uncomp_data->humidity - var2;
		2242	897 .loc 1 1240 5 is_stmt 1 view .LVU193
		2243	898 .loc 1 1240 34 is_stmt 0 view .LVU194
		2244	899 0058 D8F80800 ldr r0, [r8, #8]
		2245	900 005c FFF7FEFF bl __aeabi_ui2d
		2246	901 .LVL121:
		2247	902 .loc 1 1240 10 view .LVU195
		2248	903 0060 2246 mov r2, r4
		2249	904 0062 2B46 mov r3, r5
		2250	905 0064 FFF7FEFF bl __aeabi_dsub
		2251	906 .LVL122:
		2252	907 0068 CDE90001 strd r0, [sp]
		2253	908 .LVL123:
		2254	1241:../libBME280/src/bme280.c **** var4 = ((double)calib_data->dig_h2) / 65536.0;
		2255	909 .loc 1 1241 5 is_stmt 1 view .LVU196
		2256	910 .loc 1 1241 13 is_stmt 0 view .LVU197
		2257	911 006c BAF91A00 ldrsh r0, [r10, #26]
		2258	912 .LVL124:
		2259	913 .loc 1 1241 13 view .LVU198
		2260	914 0070 FFF7FEFF bl __aeabi_i2d
		2261	915 .LVL125:
		2262	916 .loc 1 1241 10 view .LVU199
		2263	917 0074 0022 movs r2, #0
		2264	918 0076 3C4B ldr r3, .L29+12
		2265	919 0078 FFF7FEFF bl __aeabi_dmul
		2266	920 .LVL126:
		2267	921 007c CDE90201 strd r0, [sp, #8]
		2268	922 .LVL127:
		2269	1242:../libBME280/src/bme280.c **** var5 = (1.0 + (((double)calib_data->dig_h3) / 67108864.0) * var1);
		2270	923 .loc 1 1242 5 is_stmt 1 view .LVU200
		2271	924 .loc 1 1242 21 is_stmt 0 view .LVU201
		2272	925 0080 9AF81C00 ldrb r0, [r10, #28] @ zero_extendqisi2
		2273	926 .LVL128:
		2274	927 .loc 1 1242 21 view .LVU202
		2275	928 0084 FFF7FEFF bl __aeabi_ui2d
		2276	929 .LVL129:
		2277	930 .loc 1 1242 49 view .LVU203
		2278	931 0088 0022 movs r2, #0
		2279	932 008a 384B ldr r3, .L29+16
		2280	933 008c FFF7FEFF bl __aeabi_dmul
		2281	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 39
		2282
		2283
		2284	934 .LVL130:
		2285	935 .loc 1 1242 63 view .LVU204
		2286	936 0090 3246 mov r2, r6
		2287	937 0092 3B46 mov r3, r7
		2288	938 0094 FFF7FEFF bl __aeabi_dmul
		2289	939 .LVL131:
		2290	940 .loc 1 1242 10 view .LVU205
		2291	941 0098 0022 movs r2, #0
		2292	942 009a 354B ldr r3, .L29+20
		2293	943 009c FFF7FEFF bl __aeabi_dadd
		2294	944 .LVL132:
		2295	945 00a0 0446 mov r4, r0
		2296	946 .LVL133:
		2297	947 .loc 1 1242 10 view .LVU206
		2298	948 00a2 0D46 mov r5, r1
		2299	949 .LVL134:
		2300	1243:../libBME280/src/bme280.c **** var6 = 1.0 + (((double)calib_data->dig_h6) / 67108864.0) * var1 * var5;
		2301	950 .loc 1 1243 5 is_stmt 1 view .LVU207
		2302	951 .loc 1 1243 20 is_stmt 0 view .LVU208
		2303	952 00a4 9AF92200 ldrsb r0, [r10, #34]
		2304	953 00a8 FFF7FEFF bl __aeabi_i2d
		2305	954 .LVL135:
		2306	955 .loc 1 1243 48 view .LVU209
		2307	956 00ac 0022 movs r2, #0
		2308	957 00ae 2F4B ldr r3, .L29+16
		2309	958 00b0 FFF7FEFF bl __aeabi_dmul
		2310	959 .LVL136:
		2311	960 .loc 1 1243 62 view .LVU210
		2312	961 00b4 3246 mov r2, r6
		2313	962 00b6 3B46 mov r3, r7
		2314	963 00b8 FFF7FEFF bl __aeabi_dmul
		2315	964 .LVL137:
		2316	965 .loc 1 1243 69 view .LVU211
		2317	966 00bc 2246 mov r2, r4
		2318	967 00be 2B46 mov r3, r5
		2319	968 00c0 FFF7FEFF bl __aeabi_dmul
		2320	969 .LVL138:
		2321	970 .loc 1 1243 10 view .LVU212
		2322	971 00c4 0022 movs r2, #0
		2323	972 00c6 2A4B ldr r3, .L29+20
		2324	973 00c8 FFF7FEFF bl __aeabi_dadd
		2325	974 .LVL139:
		2326	975 00cc 8046 mov r8, r0
		2327	976 .LVL140:
		2328	977 .loc 1 1243 10 view .LVU213
		2329	978 00ce 8946 mov r9, r1
		2330	979 .LVL141:
		2331	1244:../libBME280/src/bme280.c **** var6 = var3 * var4 * (var5 * var6);
		2332	980 .loc 1 1244 5 is_stmt 1 view .LVU214
		2333	981 .loc 1 1244 17 is_stmt 0 view .LVU215
		2334	982 00d0 DDE90223 ldrd r2, [sp, #8]
		2335	983 00d4 DDE90001 ldrd r0, [sp]
		2336	984 00d8 FFF7FEFF bl __aeabi_dmul
		2337	985 .LVL142:
		2338	986 00dc 0646 mov r6, r0
		2339	987 .LVL143:
		2340	988 .loc 1 1244 17 view .LVU216
		2341	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 40
		2342
		2343
		2344	989 00de 0F46 mov r7, r1
		2345	990 .loc 1 1244 32 view .LVU217
		2346	991 00e0 4246 mov r2, r8
		2347	992 00e2 4B46 mov r3, r9
		2348	993 00e4 2046 mov r0, r4
		2349	994 00e6 2946 mov r1, r5
		2350	995 00e8 FFF7FEFF bl __aeabi_dmul
		2351	996 .LVL144:
		2352	997 .loc 1 1244 10 view .LVU218
		2353	998 00ec 0246 mov r2, r0
		2354	999 00ee 0B46 mov r3, r1
		2355	1000 00f0 3046 mov r0, r6
		2356	1001 00f2 3946 mov r1, r7
		2357	1002 00f4 FFF7FEFF bl __aeabi_dmul
		2358	1003 .LVL145:
		2359	1004 00f8 0446 mov r4, r0
		2360	1005 .LVL146:
		2361	1006 .loc 1 1244 10 view .LVU219
		2362	1007 00fa 0D46 mov r5, r1
		2363	1008 .LVL147:
		2364	1245:../libBME280/src/bme280.c **** humidity = var6 * (1.0 - ((double)calib_data->dig_h1) * var6 / 524288.0);
		2365	1009 .loc 1 1245 5 is_stmt 1 view .LVU220
		2366	1010 .loc 1 1245 31 is_stmt 0 view .LVU221
		2367	1011 00fc 9AF81800 ldrb r0, [r10, #24] @ zero_extendqisi2
		2368	1012 0100 FFF7FEFF bl __aeabi_ui2d
		2369	1013 .LVL148:
		2370	1014 .loc 1 1245 59 view .LVU222
		2371	1015 0104 2246 mov r2, r4
		2372	1016 0106 2B46 mov r3, r5
		2373	1017 0108 FFF7FEFF bl __aeabi_dmul
		2374	1018 .LVL149:
		2375	1019 .loc 1 1245 66 view .LVU223
		2376	1020 010c 0022 movs r2, #0
		2377	1021 010e 4FF07B53 mov r3, #1052770304
		2378	1022 0112 FFF7FEFF bl __aeabi_dmul
		2379	1023 .LVL150:
		2380	1024 .loc 1 1245 28 view .LVU224
		2381	1025 0116 0246 mov r2, r0
		2382	1026 0118 0B46 mov r3, r1
		2383	1027 011a 0020 movs r0, #0
		2384	1028 011c 1449 ldr r1, .L29+20
		2385	1029 011e FFF7FEFF bl __aeabi_dsub
		2386	1030 .LVL151:
		2387	1031 .loc 1 1245 14 view .LVU225
		2388	1032 0122 2246 mov r2, r4
		2389	1033 0124 2B46 mov r3, r5
		2390	1034 0126 FFF7FEFF bl __aeabi_dmul
		2391	1035 .LVL152:
		2392	1036 012a 0446 mov r4, r0
		2393	1037 .LVL153:
		2394	1038 .loc 1 1245 14 view .LVU226
		2395	1039 012c 0D46 mov r5, r1
		2396	1040 .LVL154:
		2397	1246:../libBME280/src/bme280.c ****
		2398	1247:../libBME280/src/bme280.c **** if (humidity > humidity_max)
		2399	1041 .loc 1 1247 5 is_stmt 1 view .LVU227
		2400	1042 .loc 1 1247 8 is_stmt 0 view .LVU228
		2401	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 41
		2402
		2403
		2404	1043 012e 0022 movs r2, #0
		2405	1044 0130 104B ldr r3, .L29+24
		2406	1045 0132 FFF7FEFF bl __aeabi_dcmpgt
		2407	1046 .LVL155:
		2408	1047 0136 48B9 cbnz r0, .L26
		2409	1248:../libBME280/src/bme280.c **** {
		2410	1249:../libBME280/src/bme280.c **** humidity = humidity_max;
		2411	1250:../libBME280/src/bme280.c **** }
		2412	1251:../libBME280/src/bme280.c **** else if (humidity < humidity_min)
		2413	1048 .loc 1 1251 10 is_stmt 1 view .LVU229
		2414	1049 .loc 1 1251 13 is_stmt 0 view .LVU230
		2415	1050 0138 0022 movs r2, #0
		2416	1051 013a 0023 movs r3, #0
		2417	1052 013c 2046 mov r0, r4
		2418	1053 013e 2946 mov r1, r5
		2419	1054 0140 FFF7FEFF bl __aeabi_dcmplt
		2420	1055 .LVL156:
		2421	1056 0144 20B1 cbz r0, .L24
		2422	1252:../libBME280/src/bme280.c **** {
		2423	1253:../libBME280/src/bme280.c **** humidity = humidity_min;
		2424	1057 .loc 1 1253 18 view .LVU231
		2425	1058 0146 0024 movs r4, #0
		2426	1059 .LVL157:
		2427	1060 .loc 1 1253 18 view .LVU232
		2428	1061 0148 0025 movs r5, #0
		2429	1062 .LVL158:
		2430	1254:../libBME280/src/bme280.c **** }
		2431	1255:../libBME280/src/bme280.c ****
		2432	1256:../libBME280/src/bme280.c **** return humidity;
		2433	1063 .loc 1 1256 5 is_stmt 1 view .LVU233
		2434	1064 .loc 1 1256 12 is_stmt 0 view .LVU234
		2435	1065 014a 01E0 b .L24
		2436	1066 .LVL159:
		2437	1067 .L26:
		2438	1249:../libBME280/src/bme280.c **** }
		2439	1068 .loc 1 1249 18 view .LVU235
		2440	1069 014c 0024 movs r4, #0
		2441	1070 .LVL160:
		2442	1249:../libBME280/src/bme280.c **** }
		2443	1071 .loc 1 1249 18 view .LVU236
		2444	1072 014e 094D ldr r5, .L29+24
		2445	1073 .L24:
		2446	1257:../libBME280/src/bme280.c **** }
		2447	1074 .loc 1 1257 1 view .LVU237
		2448	1075 0150 2046 mov r0, r4
		2449	1076 0152 2946 mov r1, r5
		2450	1077 0154 04B0 add sp, sp, #16
		2451	1078 .LCFI4:
		2452	1079 .cfi_def_cfa_offset 32
		2453	1080 .LVL161:
		2454	1081 .loc 1 1257 1 view .LVU238
		2455	1082 @ sp needed
		2456	1083 0156 BDE8F087 pop {r4, r5, r6, r7, r8, r9, r10, pc}
		2457	1084 .LVL162:
		2458	1085 .L30:
		2459	1086 .loc 1 1257 1 view .LVU239
		2460	1087 015a 00BF .align 2
		2461	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 42
		2462
		2463
		2464	1088 .L29:
		2465	1089 015c 00C0F240 .word 1089650688
		2466	1090 0160 00005040 .word 1078984704
		2467	1091 0164 0000103F .word 1058013184
		2468	1092 0168 0000F03E .word 1055916032
		2469	1093 016c 0000503E .word 1045430272
		2470	1094 0170 0000F03F .word 1072693248
		2471	1095 0174 00005940 .word 1079574528
		2472	1096 .cfi_endproc
		2473	1097 .LFE26:
		2474	1099 .section .text.interleave_reg_addr,"ax",%progbits
		2475	1100 .align 1
		2476	1101 .syntax unified
		2477	1102 .thumb
		2478	1103 .thumb_func
		2479	1104 .fpu softvfp
		2480	1106 interleave_reg_addr:
		2481	1107 .LVL163:
		2482	1108 .LFB28:
		2483	1258:../libBME280/src/bme280.c ****
		2484	1259:../libBME280/src/bme280.c **** #else
		2485	1260:../libBME280/src/bme280.c ****
		2486	1261:../libBME280/src/bme280.c **** /*!
		2487	1262:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw temperature data and
		2488	1263:../libBME280/src/bme280.c **** * return the compensated temperature data in integer data type.
		2489	1264:../libBME280/src/bme280.c **** */
		2490	1265:../libBME280/src/bme280.c **** static int32_t compensate_temperature(const struct bme280_uncomp_data *uncomp_data,
		2491	1266:../libBME280/src/bme280.c **** struct bme280_calib_data *calib_data)
		2492	1267:../libBME280/src/bme280.c **** {
		2493	1268:../libBME280/src/bme280.c **** int32_t var1;
		2494	1269:../libBME280/src/bme280.c **** int32_t var2;
		2495	1270:../libBME280/src/bme280.c **** int32_t temperature;
		2496	1271:../libBME280/src/bme280.c **** int32_t temperature_min = -4000;
		2497	1272:../libBME280/src/bme280.c **** int32_t temperature_max = 8500;
		2498	1273:../libBME280/src/bme280.c ****
		2499	1274:../libBME280/src/bme280.c **** var1 = (int32_t)((uncomp_data->temperature / 8) - ((int32_t)calib_data->dig_t1 * 2));
		2500	1275:../libBME280/src/bme280.c **** var1 = (var1 * ((int32_t)calib_data->dig_t2)) / 2048;
		2501	1276:../libBME280/src/bme280.c **** var2 = (int32_t)((uncomp_data->temperature / 16) - ((int32_t)calib_data->dig_t1));
		2502	1277:../libBME280/src/bme280.c **** var2 = (((var2 * var2) / 4096) * ((int32_t)calib_data->dig_t3)) / 16384;
		2503	1278:../libBME280/src/bme280.c **** calib_data->t_fine = var1 + var2;
		2504	1279:../libBME280/src/bme280.c **** temperature = (calib_data->t_fine * 5 + 128) / 256;
		2505	1280:../libBME280/src/bme280.c ****
		2506	1281:../libBME280/src/bme280.c **** if (temperature < temperature_min)
		2507	1282:../libBME280/src/bme280.c **** {
		2508	1283:../libBME280/src/bme280.c **** temperature = temperature_min;
		2509	1284:../libBME280/src/bme280.c **** }
		2510	1285:../libBME280/src/bme280.c **** else if (temperature > temperature_max)
		2511	1286:../libBME280/src/bme280.c **** {
		2512	1287:../libBME280/src/bme280.c **** temperature = temperature_max;
		2513	1288:../libBME280/src/bme280.c **** }
		2514	1289:../libBME280/src/bme280.c ****
		2515	1290:../libBME280/src/bme280.c **** return temperature;
		2516	1291:../libBME280/src/bme280.c **** }
		2517	1292:../libBME280/src/bme280.c **** #ifndef BME280_32BIT_ENABLE /* 64 bit compensation for pressure data */
		2518	1293:../libBME280/src/bme280.c ****
		2519	1294:../libBME280/src/bme280.c **** /*!
		2520	1295:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw pressure data and
		2521	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 43
		2522
		2523
		2524	1296:../libBME280/src/bme280.c **** * return the compensated pressure data in integer data type with higher
		2525	1297:../libBME280/src/bme280.c **** * accuracy.
		2526	1298:../libBME280/src/bme280.c **** */
		2527	1299:../libBME280/src/bme280.c **** static uint32_t compensate_pressure(const struct bme280_uncomp_data *uncomp_data,
		2528	1300:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data)
		2529	1301:../libBME280/src/bme280.c **** {
		2530	1302:../libBME280/src/bme280.c **** int64_t var1;
		2531	1303:../libBME280/src/bme280.c **** int64_t var2;
		2532	1304:../libBME280/src/bme280.c **** int64_t var3;
		2533	1305:../libBME280/src/bme280.c **** int64_t var4;
		2534	1306:../libBME280/src/bme280.c **** uint32_t pressure;
		2535	1307:../libBME280/src/bme280.c **** uint32_t pressure_min = 3000000;
		2536	1308:../libBME280/src/bme280.c **** uint32_t pressure_max = 11000000;
		2537	1309:../libBME280/src/bme280.c ****
		2538	1310:../libBME280/src/bme280.c **** var1 = ((int64_t)calib_data->t_fine) - 128000;
		2539	1311:../libBME280/src/bme280.c **** var2 = var1 * var1 * (int64_t)calib_data->dig_p6;
		2540	1312:../libBME280/src/bme280.c **** var2 = var2 + ((var1 * (int64_t)calib_data->dig_p5) * 131072);
		2541	1313:../libBME280/src/bme280.c **** var2 = var2 + (((int64_t)calib_data->dig_p4) * 34359738368);
		2542	1314:../libBME280/src/bme280.c **** var1 = ((var1 * var1 * (int64_t)calib_data->dig_p3) / 256) + ((var1 * ((int64_t)calib_data->dig
		2543	1315:../libBME280/src/bme280.c **** var3 = ((int64_t)1) * 140737488355328;
		2544	1316:../libBME280/src/bme280.c **** var1 = (var3 + var1) * ((int64_t)calib_data->dig_p1) / 8589934592;
		2545	1317:../libBME280/src/bme280.c ****
		2546	1318:../libBME280/src/bme280.c **** /* To avoid divide by zero exception */
		2547	1319:../libBME280/src/bme280.c **** if (var1 != 0)
		2548	1320:../libBME280/src/bme280.c **** {
		2549	1321:../libBME280/src/bme280.c **** var4 = 1048576 - uncomp_data->pressure;
		2550	1322:../libBME280/src/bme280.c **** var4 = (((var4 * INT64_C(2147483648)) - var2) * 3125) / var1;
		2551	1323:../libBME280/src/bme280.c **** var1 = (((int64_t)calib_data->dig_p9) * (var4 / 8192) * (var4 / 8192)) / 33554432;
		2552	1324:../libBME280/src/bme280.c **** var2 = (((int64_t)calib_data->dig_p8) * var4) / 524288;
		2553	1325:../libBME280/src/bme280.c **** var4 = ((var4 + var1 + var2) / 256) + (((int64_t)calib_data->dig_p7) * 16);
		2554	1326:../libBME280/src/bme280.c **** pressure = (uint32_t)(((var4 / 2) * 100) / 128);
		2555	1327:../libBME280/src/bme280.c ****
		2556	1328:../libBME280/src/bme280.c **** if (pressure < pressure_min)
		2557	1329:../libBME280/src/bme280.c **** {
		2558	1330:../libBME280/src/bme280.c **** pressure = pressure_min;
		2559	1331:../libBME280/src/bme280.c **** }
		2560	1332:../libBME280/src/bme280.c **** else if (pressure > pressure_max)
		2561	1333:../libBME280/src/bme280.c **** {
		2562	1334:../libBME280/src/bme280.c **** pressure = pressure_max;
		2563	1335:../libBME280/src/bme280.c **** }
		2564	1336:../libBME280/src/bme280.c **** }
		2565	1337:../libBME280/src/bme280.c **** else
		2566	1338:../libBME280/src/bme280.c **** {
		2567	1339:../libBME280/src/bme280.c **** pressure = pressure_min;
		2568	1340:../libBME280/src/bme280.c **** }
		2569	1341:../libBME280/src/bme280.c ****
		2570	1342:../libBME280/src/bme280.c **** return pressure;
		2571	1343:../libBME280/src/bme280.c **** }
		2572	1344:../libBME280/src/bme280.c **** #else /* 32 bit compensation for pressure data */
		2573	1345:../libBME280/src/bme280.c ****
		2574	1346:../libBME280/src/bme280.c **** /*!
		2575	1347:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw pressure data and
		2576	1348:../libBME280/src/bme280.c **** * return the compensated pressure data in integer data type.
		2577	1349:../libBME280/src/bme280.c **** */
		2578	1350:../libBME280/src/bme280.c **** static uint32_t compensate_pressure(const struct bme280_uncomp_data *uncomp_data,
		2579	1351:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data)
		2580	1352:../libBME280/src/bme280.c **** {
		2581	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 44
		2582
		2583
		2584	1353:../libBME280/src/bme280.c **** int32_t var1;
		2585	1354:../libBME280/src/bme280.c **** int32_t var2;
		2586	1355:../libBME280/src/bme280.c **** int32_t var3;
		2587	1356:../libBME280/src/bme280.c **** int32_t var4;
		2588	1357:../libBME280/src/bme280.c **** uint32_t var5;
		2589	1358:../libBME280/src/bme280.c **** uint32_t pressure;
		2590	1359:../libBME280/src/bme280.c **** uint32_t pressure_min = 30000;
		2591	1360:../libBME280/src/bme280.c **** uint32_t pressure_max = 110000;
		2592	1361:../libBME280/src/bme280.c ****
		2593	1362:../libBME280/src/bme280.c **** var1 = (((int32_t)calib_data->t_fine) / 2) - (int32_t)64000;
		2594	1363:../libBME280/src/bme280.c **** var2 = (((var1 / 4) * (var1 / 4)) / 2048) * ((int32_t)calib_data->dig_p6);
		2595	1364:../libBME280/src/bme280.c **** var2 = var2 + ((var1 * ((int32_t)calib_data->dig_p5)) * 2);
		2596	1365:../libBME280/src/bme280.c **** var2 = (var2 / 4) + (((int32_t)calib_data->dig_p4) * 65536);
		2597	1366:../libBME280/src/bme280.c **** var3 = (calib_data->dig_p3 * (((var1 / 4) * (var1 / 4)) / 8192)) / 8;
		2598	1367:../libBME280/src/bme280.c **** var4 = (((int32_t)calib_data->dig_p2) * var1) / 2;
		2599	1368:../libBME280/src/bme280.c **** var1 = (var3 + var4) / 262144;
		2600	1369:../libBME280/src/bme280.c **** var1 = (((32768 + var1)) * ((int32_t)calib_data->dig_p1)) / 32768;
		2601	1370:../libBME280/src/bme280.c ****
		2602	1371:../libBME280/src/bme280.c **** /* avoid exception caused by division by zero */
		2603	1372:../libBME280/src/bme280.c **** if (var1)
		2604	1373:../libBME280/src/bme280.c **** {
		2605	1374:../libBME280/src/bme280.c **** var5 = (uint32_t)((uint32_t)1048576) - uncomp_data->pressure;
		2606	1375:../libBME280/src/bme280.c **** pressure = ((uint32_t)(var5 - (uint32_t)(var2 / 4096))) * 3125;
		2607	1376:../libBME280/src/bme280.c ****
		2608	1377:../libBME280/src/bme280.c **** if (pressure < 0x80000000)
		2609	1378:../libBME280/src/bme280.c **** {
		2610	1379:../libBME280/src/bme280.c **** pressure = (pressure << 1) / ((uint32_t)var1);
		2611	1380:../libBME280/src/bme280.c **** }
		2612	1381:../libBME280/src/bme280.c **** else
		2613	1382:../libBME280/src/bme280.c **** {
		2614	1383:../libBME280/src/bme280.c **** pressure = (pressure / (uint32_t)var1) * 2;
		2615	1384:../libBME280/src/bme280.c **** }
		2616	1385:../libBME280/src/bme280.c ****
		2617	1386:../libBME280/src/bme280.c **** var1 = (((int32_t)calib_data->dig_p9) * ((int32_t)(((pressure / 8) * (pressure / 8)) / 8192
		2618	1387:../libBME280/src/bme280.c **** var2 = (((int32_t)(pressure / 4)) * ((int32_t)calib_data->dig_p8)) / 8192;
		2619	1388:../libBME280/src/bme280.c **** pressure = (uint32_t)((int32_t)pressure + ((var1 + var2 + calib_data->dig_p7) / 16));
		2620	1389:../libBME280/src/bme280.c ****
		2621	1390:../libBME280/src/bme280.c **** if (pressure < pressure_min)
		2622	1391:../libBME280/src/bme280.c **** {
		2623	1392:../libBME280/src/bme280.c **** pressure = pressure_min;
		2624	1393:../libBME280/src/bme280.c **** }
		2625	1394:../libBME280/src/bme280.c **** else if (pressure > pressure_max)
		2626	1395:../libBME280/src/bme280.c **** {
		2627	1396:../libBME280/src/bme280.c **** pressure = pressure_max;
		2628	1397:../libBME280/src/bme280.c **** }
		2629	1398:../libBME280/src/bme280.c **** }
		2630	1399:../libBME280/src/bme280.c **** else
		2631	1400:../libBME280/src/bme280.c **** {
		2632	1401:../libBME280/src/bme280.c **** pressure = pressure_min;
		2633	1402:../libBME280/src/bme280.c **** }
		2634	1403:../libBME280/src/bme280.c ****
		2635	1404:../libBME280/src/bme280.c **** return pressure;
		2636	1405:../libBME280/src/bme280.c **** }
		2637	1406:../libBME280/src/bme280.c **** #endif
		2638	1407:../libBME280/src/bme280.c ****
		2639	1408:../libBME280/src/bme280.c **** /*!
		2640	1409:../libBME280/src/bme280.c **** * @brief This internal API is used to compensate the raw humidity data and
		2641	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 45
		2642
		2643
		2644	1410:../libBME280/src/bme280.c **** * return the compensated humidity data in integer data type.
		2645	1411:../libBME280/src/bme280.c **** */
		2646	1412:../libBME280/src/bme280.c **** static uint32_t compensate_humidity(const struct bme280_uncomp_data *uncomp_data,
		2647	1413:../libBME280/src/bme280.c **** const struct bme280_calib_data *calib_data)
		2648	1414:../libBME280/src/bme280.c **** {
		2649	1415:../libBME280/src/bme280.c **** int32_t var1;
		2650	1416:../libBME280/src/bme280.c **** int32_t var2;
		2651	1417:../libBME280/src/bme280.c **** int32_t var3;
		2652	1418:../libBME280/src/bme280.c **** int32_t var4;
		2653	1419:../libBME280/src/bme280.c **** int32_t var5;
		2654	1420:../libBME280/src/bme280.c **** uint32_t humidity;
		2655	1421:../libBME280/src/bme280.c **** uint32_t humidity_max = 102400;
		2656	1422:../libBME280/src/bme280.c ****
		2657	1423:../libBME280/src/bme280.c **** var1 = calib_data->t_fine - ((int32_t)76800);
		2658	1424:../libBME280/src/bme280.c **** var2 = (int32_t)(uncomp_data->humidity * 16384);
		2659	1425:../libBME280/src/bme280.c **** var3 = (int32_t)(((int32_t)calib_data->dig_h4) * 1048576);
		2660	1426:../libBME280/src/bme280.c **** var4 = ((int32_t)calib_data->dig_h5) * var1;
		2661	1427:../libBME280/src/bme280.c **** var5 = (((var2 - var3) - var4) + (int32_t)16384) / 32768;
		2662	1428:../libBME280/src/bme280.c **** var2 = (var1 * ((int32_t)calib_data->dig_h6)) / 1024;
		2663	1429:../libBME280/src/bme280.c **** var3 = (var1 * ((int32_t)calib_data->dig_h3)) / 2048;
		2664	1430:../libBME280/src/bme280.c **** var4 = ((var2 * (var3 + (int32_t)32768)) / 1024) + (int32_t)2097152;
		2665	1431:../libBME280/src/bme280.c **** var2 = ((var4 * ((int32_t)calib_data->dig_h2)) + 8192) / 16384;
		2666	1432:../libBME280/src/bme280.c **** var3 = var5 * var2;
		2667	1433:../libBME280/src/bme280.c **** var4 = ((var3 / 32768) * (var3 / 32768)) / 128;
		2668	1434:../libBME280/src/bme280.c **** var5 = var3 - ((var4 * ((int32_t)calib_data->dig_h1)) / 16);
		2669	1435:../libBME280/src/bme280.c **** var5 = (var5 < 0 ? 0 : var5);
		2670	1436:../libBME280/src/bme280.c **** var5 = (var5 > 419430400 ? 419430400 : var5);
		2671	1437:../libBME280/src/bme280.c **** humidity = (uint32_t)(var5 / 4096);
		2672	1438:../libBME280/src/bme280.c ****
		2673	1439:../libBME280/src/bme280.c **** if (humidity > humidity_max)
		2674	1440:../libBME280/src/bme280.c **** {
		2675	1441:../libBME280/src/bme280.c **** humidity = humidity_max;
		2676	1442:../libBME280/src/bme280.c **** }
		2677	1443:../libBME280/src/bme280.c ****
		2678	1444:../libBME280/src/bme280.c **** return humidity;
		2679	1445:../libBME280/src/bme280.c **** }
		2680	1446:../libBME280/src/bme280.c **** #endif
		2681	1447:../libBME280/src/bme280.c ****
		2682	1448:../libBME280/src/bme280.c **** /*!
		2683	1449:../libBME280/src/bme280.c **** * @brief This internal API reads the calibration data from the sensor, parse
		2684	1450:../libBME280/src/bme280.c **** * it and store in the device structure.
		2685	1451:../libBME280/src/bme280.c **** */
		2686	1452:../libBME280/src/bme280.c **** static int8_t get_calib_data(struct bme280_dev *dev)
		2687	1453:../libBME280/src/bme280.c **** {
		2688	1454:../libBME280/src/bme280.c **** int8_t rslt;
		2689	1455:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_TEMP_PRESS_CALIB_DATA_ADDR;
		2690	1456:../libBME280/src/bme280.c ****
		2691	1457:../libBME280/src/bme280.c **** /* Array to store calibration data */
		2692	1458:../libBME280/src/bme280.c **** uint8_t calib_data[BME280_TEMP_PRESS_CALIB_DATA_LEN] = { 0 };
		2693	1459:../libBME280/src/bme280.c ****
		2694	1460:../libBME280/src/bme280.c **** /* Read the calibration data from the sensor */
		2695	1461:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, calib_data, BME280_TEMP_PRESS_CALIB_DATA_LEN, dev);
		2696	1462:../libBME280/src/bme280.c ****
		2697	1463:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		2698	1464:../libBME280/src/bme280.c **** {
		2699	1465:../libBME280/src/bme280.c **** /* Parse temperature and pressure calibration data and store
		2700	1466:../libBME280/src/bme280.c **** * it in device structure
		2701	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 46
		2702
		2703
		2704	1467:../libBME280/src/bme280.c **** */
		2705	1468:../libBME280/src/bme280.c **** parse_temp_press_calib_data(calib_data, dev);
		2706	1469:../libBME280/src/bme280.c **** reg_addr = BME280_HUMIDITY_CALIB_DATA_ADDR;
		2707	1470:../libBME280/src/bme280.c ****
		2708	1471:../libBME280/src/bme280.c **** /* Read the humidity calibration data from the sensor */
		2709	1472:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, calib_data, BME280_HUMIDITY_CALIB_DATA_LEN, dev);
		2710	1473:../libBME280/src/bme280.c ****
		2711	1474:../libBME280/src/bme280.c **** if (rslt == BME280_OK)
		2712	1475:../libBME280/src/bme280.c **** {
		2713	1476:../libBME280/src/bme280.c **** /* Parse humidity calibration data and store it in
		2714	1477:../libBME280/src/bme280.c **** * device structure
		2715	1478:../libBME280/src/bme280.c **** */
		2716	1479:../libBME280/src/bme280.c **** parse_humidity_calib_data(calib_data, dev);
		2717	1480:../libBME280/src/bme280.c **** }
		2718	1481:../libBME280/src/bme280.c **** }
		2719	1482:../libBME280/src/bme280.c ****
		2720	1483:../libBME280/src/bme280.c **** return rslt;
		2721	1484:../libBME280/src/bme280.c **** }
		2722	1485:../libBME280/src/bme280.c ****
		2723	1486:../libBME280/src/bme280.c **** /*!
		2724	1487:../libBME280/src/bme280.c **** * @brief This internal API interleaves the register address between the
		2725	1488:../libBME280/src/bme280.c **** * register data buffer for burst write operation.
		2726	1489:../libBME280/src/bme280.c **** */
		2727	1490:../libBME280/src/bme280.c **** static void interleave_reg_addr(const uint8_t reg_addr, uint8_t temp_buff, const uint8_t *reg_dat
		2728	1491:../libBME280/src/bme280.c **** {
		2729	1109 .loc 1 1491 1 is_stmt 1 view -0
		2730	1110 .cfi_startproc
		2731	1111 @ args = 0, pretend = 0, frame = 0
		2732	1112 @ frame_needed = 0, uses_anonymous_args = 0
		2733	1113 @ link register save eliminated.
		2734	1114 .loc 1 1491 1 is_stmt 0 view .LVU241
		2735	1115 0000 70B4 push {r4, r5, r6}
		2736	1116 .LCFI5:
		2737	1117 .cfi_def_cfa_offset 12
		2738	1118 .cfi_offset 4, -12
		2739	1119 .cfi_offset 5, -8
		2740	1120 .cfi_offset 6, -4
		2741	1492:../libBME280/src/bme280.c **** uint8_t index;
		2742	1121 .loc 1 1492 5 is_stmt 1 view .LVU242
		2743	1493:../libBME280/src/bme280.c ****
		2744	1494:../libBME280/src/bme280.c **** for (index = 1; index < len; index++)
		2745	1122 .loc 1 1494 5 view .LVU243
		2746	1123 .LVL164:
		2747	1124 .loc 1 1494 16 is_stmt 0 view .LVU244
		2748	1125 0002 0124 movs r4, #1
		2749	1126 .LVL165:
		2750	1127 .L32:
		2751	1128 .loc 1 1494 5 discriminator 1 view .LVU245
		2752	1129 0004 9C42 cmp r4, r3
		2753	1130 0006 09D2 bcs .L35
		2754	1495:../libBME280/src/bme280.c **** {
		2755	1496:../libBME280/src/bme280.c **** temp_buff[(index * 2) - 1] = reg_addr[index];
		2756	1131 .loc 1 1496 9 is_stmt 1 discriminator 3 view .LVU246
		2757	1132 .loc 1 1496 26 is_stmt 0 discriminator 3 view .LVU247
		2758	1133 0008 6500 lsls r5, r4, #1
		2759	1134 .loc 1 1496 18 discriminator 3 view .LVU248
		2760	1135 000a 013D subs r5, r5, #1
		2761	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 47
		2762
		2763
		2764	1136 .loc 1 1496 46 discriminator 3 view .LVU249
		2765	1137 000c 065D ldrb r6, [r0, r4] @ zero_extendqisi2
		2766	1138 .loc 1 1496 36 discriminator 3 view .LVU250
		2767	1139 000e 4E55 strb r6, [r1, r5]
		2768	1497:../libBME280/src/bme280.c **** temp_buff[index * 2] = reg_data[index];
		2769	1140 .loc 1 1497 9 is_stmt 1 discriminator 3 view .LVU251
		2770	1141 .loc 1 1497 40 is_stmt 0 discriminator 3 view .LVU252
		2771	1142 0010 155D ldrb r5, [r2, r4] @ zero_extendqisi2
		2772	1143 .loc 1 1497 30 discriminator 3 view .LVU253
		2773	1144 0012 01F81450 strb r5, [r1, r4, lsl #1]
		2774	1494:../libBME280/src/bme280.c **** {
		2775	1145 .loc 1 1494 39 discriminator 3 view .LVU254
		2776	1146 0016 0134 adds r4, r4, #1
		2777	1147 .LVL166:
		2778	1494:../libBME280/src/bme280.c **** {
		2779	1148 .loc 1 1494 39 discriminator 3 view .LVU255
		2780	1149 0018 E4B2 uxtb r4, r4
		2781	1150 .LVL167:
		2782	1494:../libBME280/src/bme280.c **** {
		2783	1151 .loc 1 1494 39 discriminator 3 view .LVU256
		2784	1152 001a F3E7 b .L32
		2785	1153 .L35:
		2786	1498:../libBME280/src/bme280.c **** }
		2787	1499:../libBME280/src/bme280.c **** }
		2788	1154 .loc 1 1499 1 view .LVU257
		2789	1155 001c 70BC pop {r4, r5, r6}
		2790	1156 .LCFI6:
		2791	1157 .cfi_restore 6
		2792	1158 .cfi_restore 5
		2793	1159 .cfi_restore 4
		2794	1160 .cfi_def_cfa_offset 0
		2795	1161 .LVL168:
		2796	1162 .loc 1 1499 1 view .LVU258
		2797	1163 001e 7047 bx lr
		2798	1164 .cfi_endproc
		2799	1165 .LFE28:
		2800	1167 .section .text.parse_temp_press_calib_data,"ax",%progbits
		2801	1168 .align 1
		2802	1169 .syntax unified
		2803	1170 .thumb
		2804	1171 .thumb_func
		2805	1172 .fpu softvfp
		2806	1174 parse_temp_press_calib_data:
		2807	1175 .LVL169:
		2808	1176 .LFB29:
		2809	1500:../libBME280/src/bme280.c ****
		2810	1501:../libBME280/src/bme280.c **** /*!
		2811	1502:../libBME280/src/bme280.c **** * @brief This internal API is used to parse the temperature and
		2812	1503:../libBME280/src/bme280.c **** * pressure calibration data and store it in device structure.
		2813	1504:../libBME280/src/bme280.c **** */
		2814	1505:../libBME280/src/bme280.c **** static void parse_temp_press_calib_data(const uint8_t reg_data, struct bme280_dev dev)
		2815	1506:../libBME280/src/bme280.c **** {
		2816	1177 .loc 1 1506 1 is_stmt 1 view -0
		2817	1178 .cfi_startproc
		2818	1179 @ args = 0, pretend = 0, frame = 0
		2819	1180 @ frame_needed = 0, uses_anonymous_args = 0
		2820	1181 @ link register save eliminated.
		2821	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 48
		2822
		2823
		2824	1507:../libBME280/src/bme280.c **** struct bme280_calib_data *calib_data = &dev->calib_data;
		2825	1182 .loc 1 1507 5 view .LVU260
		2826	1508:../libBME280/src/bme280.c ****
		2827	1509:../libBME280/src/bme280.c **** calib_data->dig_t1 = BME280_CONCAT_BYTES(reg_data[1], reg_data[0]);
		2828	1183 .loc 1 1509 5 view .LVU261
		2829	1184 .loc 1 1509 26 is_stmt 0 view .LVU262
		2830	1185 0000 4278 ldrb r2, [r0, #1] @ zero_extendqisi2
		2831	1186 0002 0378 ldrb r3, [r0] @ zero_extendqisi2
		2832	1187 0004 43EA0223 orr r3, r3, r2, lsl #8
		2833	1188 .loc 1 1509 24 view .LVU263
		2834	1189 0008 0B83 strh r3, [r1, #24] @ movhi
		2835	1510:../libBME280/src/bme280.c **** calib_data->dig_t2 = (int16_t)BME280_CONCAT_BYTES(reg_data[3], reg_data[2]);
		2836	1190 .loc 1 1510 5 is_stmt 1 view .LVU264
		2837	1191 .loc 1 1510 35 is_stmt 0 view .LVU265
		2838	1192 000a C278 ldrb r2, [r0, #3] @ zero_extendqisi2
		2839	1193 000c 8378 ldrb r3, [r0, #2] @ zero_extendqisi2
		2840	1194 .loc 1 1510 26 view .LVU266
		2841	1195 000e 43EA0223 orr r3, r3, r2, lsl #8
		2842	1196 .loc 1 1510 24 view .LVU267
		2843	1197 0012 4B83 strh r3, [r1, #26] @ movhi
		2844	1511:../libBME280/src/bme280.c **** calib_data->dig_t3 = (int16_t)BME280_CONCAT_BYTES(reg_data[5], reg_data[4]);
		2845	1198 .loc 1 1511 5 is_stmt 1 view .LVU268
		2846	1199 .loc 1 1511 35 is_stmt 0 view .LVU269
		2847	1200 0014 4279 ldrb r2, [r0, #5] @ zero_extendqisi2
		2848	1201 0016 0379 ldrb r3, [r0, #4] @ zero_extendqisi2
		2849	1202 .loc 1 1511 26 view .LVU270
		2850	1203 0018 43EA0223 orr r3, r3, r2, lsl #8
		2851	1204 .loc 1 1511 24 view .LVU271
		2852	1205 001c 8B83 strh r3, [r1, #28] @ movhi
		2853	1512:../libBME280/src/bme280.c **** calib_data->dig_p1 = BME280_CONCAT_BYTES(reg_data[7], reg_data[6]);
		2854	1206 .loc 1 1512 5 is_stmt 1 view .LVU272
		2855	1207 .loc 1 1512 26 is_stmt 0 view .LVU273
		2856	1208 001e C279 ldrb r2, [r0, #7] @ zero_extendqisi2
		2857	1209 0020 8379 ldrb r3, [r0, #6] @ zero_extendqisi2
		2858	1210 0022 43EA0223 orr r3, r3, r2, lsl #8
		2859	1211 .loc 1 1512 24 view .LVU274
		2860	1212 0026 CB83 strh r3, [r1, #30] @ movhi
		2861	1513:../libBME280/src/bme280.c **** calib_data->dig_p2 = (int16_t)BME280_CONCAT_BYTES(reg_data[9], reg_data[8]);
		2862	1213 .loc 1 1513 5 is_stmt 1 view .LVU275
		2863	1214 .loc 1 1513 35 is_stmt 0 view .LVU276
		2864	1215 0028 427A ldrb r2, [r0, #9] @ zero_extendqisi2
		2865	1216 002a 037A ldrb r3, [r0, #8] @ zero_extendqisi2
		2866	1217 .loc 1 1513 26 view .LVU277
		2867	1218 002c 43EA0223 orr r3, r3, r2, lsl #8
		2868	1219 .loc 1 1513 24 view .LVU278
		2869	1220 0030 0B84 strh r3, [r1, #32] @ movhi
		2870	1514:../libBME280/src/bme280.c **** calib_data->dig_p3 = (int16_t)BME280_CONCAT_BYTES(reg_data[11], reg_data[10]);
		2871	1221 .loc 1 1514 5 is_stmt 1 view .LVU279
		2872	1222 .loc 1 1514 35 is_stmt 0 view .LVU280
		2873	1223 0032 C27A ldrb r2, [r0, #11] @ zero_extendqisi2
		2874	1224 0034 837A ldrb r3, [r0, #10] @ zero_extendqisi2
		2875	1225 .loc 1 1514 26 view .LVU281
		2876	1226 0036 43EA0223 orr r3, r3, r2, lsl #8
		2877	1227 .loc 1 1514 24 view .LVU282
		2878	1228 003a 4B84 strh r3, [r1, #34] @ movhi
		2879	1515:../libBME280/src/bme280.c **** calib_data->dig_p4 = (int16_t)BME280_CONCAT_BYTES(reg_data[13], reg_data[12]);
		2880	1229 .loc 1 1515 5 is_stmt 1 view .LVU283
		2881	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 49
		2882
		2883
		2884	1230 .loc 1 1515 35 is_stmt 0 view .LVU284
		2885	1231 003c 427B ldrb r2, [r0, #13] @ zero_extendqisi2
		2886	1232 003e 037B ldrb r3, [r0, #12] @ zero_extendqisi2
		2887	1233 .loc 1 1515 26 view .LVU285
		2888	1234 0040 43EA0223 orr r3, r3, r2, lsl #8
		2889	1235 .loc 1 1515 24 view .LVU286
		2890	1236 0044 8B84 strh r3, [r1, #36] @ movhi
		2891	1516:../libBME280/src/bme280.c **** calib_data->dig_p5 = (int16_t)BME280_CONCAT_BYTES(reg_data[15], reg_data[14]);
		2892	1237 .loc 1 1516 5 is_stmt 1 view .LVU287
		2893	1238 .loc 1 1516 35 is_stmt 0 view .LVU288
		2894	1239 0046 C27B ldrb r2, [r0, #15] @ zero_extendqisi2
		2895	1240 0048 837B ldrb r3, [r0, #14] @ zero_extendqisi2
		2896	1241 .loc 1 1516 26 view .LVU289
		2897	1242 004a 43EA0223 orr r3, r3, r2, lsl #8
		2898	1243 .loc 1 1516 24 view .LVU290
		2899	1244 004e CB84 strh r3, [r1, #38] @ movhi
		2900	1517:../libBME280/src/bme280.c **** calib_data->dig_p6 = (int16_t)BME280_CONCAT_BYTES(reg_data[17], reg_data[16]);
		2901	1245 .loc 1 1517 5 is_stmt 1 view .LVU291
		2902	1246 .loc 1 1517 35 is_stmt 0 view .LVU292
		2903	1247 0050 427C ldrb r2, [r0, #17] @ zero_extendqisi2
		2904	1248 0052 037C ldrb r3, [r0, #16] @ zero_extendqisi2
		2905	1249 .loc 1 1517 26 view .LVU293
		2906	1250 0054 43EA0223 orr r3, r3, r2, lsl #8
		2907	1251 .loc 1 1517 24 view .LVU294
		2908	1252 0058 0B85 strh r3, [r1, #40] @ movhi
		2909	1518:../libBME280/src/bme280.c **** calib_data->dig_p7 = (int16_t)BME280_CONCAT_BYTES(reg_data[19], reg_data[18]);
		2910	1253 .loc 1 1518 5 is_stmt 1 view .LVU295
		2911	1254 .loc 1 1518 35 is_stmt 0 view .LVU296
		2912	1255 005a C27C ldrb r2, [r0, #19] @ zero_extendqisi2
		2913	1256 005c 837C ldrb r3, [r0, #18] @ zero_extendqisi2
		2914	1257 .loc 1 1518 26 view .LVU297
		2915	1258 005e 43EA0223 orr r3, r3, r2, lsl #8
		2916	1259 .loc 1 1518 24 view .LVU298
		2917	1260 0062 4B85 strh r3, [r1, #42] @ movhi
		2918	1519:../libBME280/src/bme280.c **** calib_data->dig_p8 = (int16_t)BME280_CONCAT_BYTES(reg_data[21], reg_data[20]);
		2919	1261 .loc 1 1519 5 is_stmt 1 view .LVU299
		2920	1262 .loc 1 1519 35 is_stmt 0 view .LVU300
		2921	1263 0064 427D ldrb r2, [r0, #21] @ zero_extendqisi2
		2922	1264 0066 037D ldrb r3, [r0, #20] @ zero_extendqisi2
		2923	1265 .loc 1 1519 26 view .LVU301
		2924	1266 0068 43EA0223 orr r3, r3, r2, lsl #8
		2925	1267 .loc 1 1519 24 view .LVU302
		2926	1268 006c 8B85 strh r3, [r1, #44] @ movhi
		2927	1520:../libBME280/src/bme280.c **** calib_data->dig_p9 = (int16_t)BME280_CONCAT_BYTES(reg_data[23], reg_data[22]);
		2928	1269 .loc 1 1520 5 is_stmt 1 view .LVU303
		2929	1270 .loc 1 1520 35 is_stmt 0 view .LVU304
		2930	1271 006e C27D ldrb r2, [r0, #23] @ zero_extendqisi2
		2931	1272 0070 837D ldrb r3, [r0, #22] @ zero_extendqisi2
		2932	1273 .loc 1 1520 26 view .LVU305
		2933	1274 0072 43EA0223 orr r3, r3, r2, lsl #8
		2934	1275 .loc 1 1520 24 view .LVU306
		2935	1276 0076 CB85 strh r3, [r1, #46] @ movhi
		2936	1521:../libBME280/src/bme280.c **** calib_data->dig_h1 = reg_data[25];
		2937	1277 .loc 1 1521 5 is_stmt 1 view .LVU307
		2938	1278 .loc 1 1521 24 is_stmt 0 view .LVU308
		2939	1279 0078 437E ldrb r3, [r0, #25] @ zero_extendqisi2
		2940	1280 007a 81F83030 strb r3, [r1, #48]
		2941	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 50
		2942
		2943
		2944	1522:../libBME280/src/bme280.c **** }
		2945	1281 .loc 1 1522 1 view .LVU309
		2946	1282 007e 7047 bx lr
		2947	1283 .cfi_endproc
		2948	1284 .LFE29:
		2949	1286 .section .text.parse_humidity_calib_data,"ax",%progbits
		2950	1287 .align 1
		2951	1288 .syntax unified
		2952	1289 .thumb
		2953	1290 .thumb_func
		2954	1291 .fpu softvfp
		2955	1293 parse_humidity_calib_data:
		2956	1294 .LVL170:
		2957	1295 .LFB30:
		2958	1523:../libBME280/src/bme280.c ****
		2959	1524:../libBME280/src/bme280.c **** /*!
		2960	1525:../libBME280/src/bme280.c **** * @brief This internal API is used to parse the humidity calibration data
		2961	1526:../libBME280/src/bme280.c **** * and store it in device structure.
		2962	1527:../libBME280/src/bme280.c **** */
		2963	1528:../libBME280/src/bme280.c **** static void parse_humidity_calib_data(const uint8_t reg_data, struct bme280_dev dev)
		2964	1529:../libBME280/src/bme280.c **** {
		2965	1296 .loc 1 1529 1 is_stmt 1 view -0
		2966	1297 .cfi_startproc
		2967	1298 @ args = 0, pretend = 0, frame = 0
		2968	1299 @ frame_needed = 0, uses_anonymous_args = 0
		2969	1300 @ link register save eliminated.
		2970	1530:../libBME280/src/bme280.c **** struct bme280_calib_data *calib_data = &dev->calib_data;
		2971	1301 .loc 1 1530 5 view .LVU311
		2972	1531:../libBME280/src/bme280.c **** int16_t dig_h4_lsb;
		2973	1302 .loc 1 1531 5 view .LVU312
		2974	1532:../libBME280/src/bme280.c **** int16_t dig_h4_msb;
		2975	1303 .loc 1 1532 5 view .LVU313
		2976	1533:../libBME280/src/bme280.c **** int16_t dig_h5_lsb;
		2977	1304 .loc 1 1533 5 view .LVU314
		2978	1534:../libBME280/src/bme280.c **** int16_t dig_h5_msb;
		2979	1305 .loc 1 1534 5 view .LVU315
		2980	1535:../libBME280/src/bme280.c ****
		2981	1536:../libBME280/src/bme280.c **** calib_data->dig_h2 = (int16_t)BME280_CONCAT_BYTES(reg_data[1], reg_data[0]);
		2982	1306 .loc 1 1536 5 view .LVU316
		2983	1307 .loc 1 1536 35 is_stmt 0 view .LVU317
		2984	1308 0000 4278 ldrb r2, [r0, #1] @ zero_extendqisi2
		2985	1309 0002 0378 ldrb r3, [r0] @ zero_extendqisi2
		2986	1310 .loc 1 1536 26 view .LVU318
		2987	1311 0004 43EA0223 orr r3, r3, r2, lsl #8
		2988	1312 .loc 1 1536 24 view .LVU319
		2989	1313 0008 4B86 strh r3, [r1, #50] @ movhi
		2990	1537:../libBME280/src/bme280.c **** calib_data->dig_h3 = reg_data[2];
		2991	1314 .loc 1 1537 5 is_stmt 1 view .LVU320
		2992	1315 .loc 1 1537 24 is_stmt 0 view .LVU321
		2993	1316 000a 8378 ldrb r3, [r0, #2] @ zero_extendqisi2
		2994	1317 000c 81F83430 strb r3, [r1, #52]
		2995	1538:../libBME280/src/bme280.c **** dig_h4_msb = (int16_t)(int8_t)reg_data[3] * 16;
		2996	1318 .loc 1 1538 5 is_stmt 1 view .LVU322
		2997	1319 .loc 1 1538 27 is_stmt 0 view .LVU323
		2998	1320 0010 90F90330 ldrsb r3, [r0, #3]
		2999	1321 0014 9BB2 uxth r3, r3
		3000	1322 .loc 1 1538 47 view .LVU324
		3001	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 51
		3002
		3003
		3004	1323 0016 1B01 lsls r3, r3, #4
		3005	1324 .loc 1 1538 16 view .LVU325
		3006	1325 0018 1BB2 sxth r3, r3
		3007	1326 .LVL171:
		3008	1539:../libBME280/src/bme280.c **** dig_h4_lsb = (int16_t)(reg_data[4] & 0x0F);
		3009	1327 .loc 1 1539 5 is_stmt 1 view .LVU326
		3010	1328 .loc 1 1539 36 is_stmt 0 view .LVU327
		3011	1329 001a 0279 ldrb r2, [r0, #4] @ zero_extendqisi2
		3012	1330 .loc 1 1539 16 view .LVU328
		3013	1331 001c 02F00F02 and r2, r2, #15
		3014	1332 .LVL172:
		3015	1540:../libBME280/src/bme280.c **** calib_data->dig_h4 = dig_h4_msb \| dig_h4_lsb;
		3016	1333 .loc 1 1540 5 is_stmt 1 view .LVU329
		3017	1334 .loc 1 1540 24 is_stmt 0 view .LVU330
		3018	1335 0020 1343 orrs r3, r3, r2
		3019	1336 .LVL173:
		3020	1337 .loc 1 1540 24 view .LVU331
		3021	1338 0022 CB86 strh r3, [r1, #54] @ movhi
		3022	1339 .LVL174:
		3023	1541:../libBME280/src/bme280.c **** dig_h5_msb = (int16_t)(int8_t)reg_data[5] * 16;
		3024	1340 .loc 1 1541 5 is_stmt 1 view .LVU332
		3025	1341 .loc 1 1541 27 is_stmt 0 view .LVU333
		3026	1342 0024 90F90530 ldrsb r3, [r0, #5]
		3027	1343 0028 9BB2 uxth r3, r3
		3028	1344 .loc 1 1541 47 view .LVU334
		3029	1345 002a 1B01 lsls r3, r3, #4
		3030	1346 .loc 1 1541 16 view .LVU335
		3031	1347 002c 1BB2 sxth r3, r3
		3032	1348 .LVL175:
		3033	1542:../libBME280/src/bme280.c **** dig_h5_lsb = (int16_t)(reg_data[4] >> 4);
		3034	1349 .loc 1 1542 5 is_stmt 1 view .LVU336
		3035	1350 .loc 1 1542 36 is_stmt 0 view .LVU337
		3036	1351 002e 0279 ldrb r2, [r0, #4] @ zero_extendqisi2
		3037	1352 .LVL176:
		3038	1543:../libBME280/src/bme280.c **** calib_data->dig_h5 = dig_h5_msb \| dig_h5_lsb;
		3039	1353 .loc 1 1543 5 is_stmt 1 view .LVU338
		3040	1354 .loc 1 1543 24 is_stmt 0 view .LVU339
		3041	1355 0030 43EA1213 orr r3, r3, r2, lsr #4
		3042	1356 .LVL177:
		3043	1357 .loc 1 1543 24 view .LVU340
		3044	1358 0034 0B87 strh r3, [r1, #56] @ movhi
		3045	1359 .LVL178:
		3046	1544:../libBME280/src/bme280.c **** calib_data->dig_h6 = (int8_t)reg_data[6];
		3047	1360 .loc 1 1544 5 is_stmt 1 view .LVU341
		3048	1361 .loc 1 1544 26 is_stmt 0 view .LVU342
		3049	1362 0036 90F90630 ldrsb r3, [r0, #6]
		3050	1363 .loc 1 1544 24 view .LVU343
		3051	1364 003a 81F83A30 strb r3, [r1, #58]
		3052	1545:../libBME280/src/bme280.c **** }
		3053	1365 .loc 1 1545 1 view .LVU344
		3054	1366 003e 7047 bx lr
		3055	1367 .cfi_endproc
		3056	1368 .LFE30:
		3057	1370 .section .text.are_settings_changed,"ax",%progbits
		3058	1371 .align 1
		3059	1372 .syntax unified
		3060	1373 .thumb
		3061	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 52
		3062
		3063
		3064	1374 .thumb_func
		3065	1375 .fpu softvfp
		3066	1377 are_settings_changed:
		3067	1378 .LVL179:
		3068	1379 .LFB31:
		3069	1546:../libBME280/src/bme280.c ****
		3070	1547:../libBME280/src/bme280.c **** /*!
		3071	1548:../libBME280/src/bme280.c **** * @brief This internal API is used to identify the settings which the user
		3072	1549:../libBME280/src/bme280.c **** * wants to modify in the sensor.
		3073	1550:../libBME280/src/bme280.c **** */
		3074	1551:../libBME280/src/bme280.c **** static uint8_t are_settings_changed(uint8_t sub_settings, uint8_t desired_settings)
		3075	1552:../libBME280/src/bme280.c **** {
		3076	1380 .loc 1 1552 1 is_stmt 1 view -0
		3077	1381 .cfi_startproc
		3078	1382 @ args = 0, pretend = 0, frame = 0
		3079	1383 @ frame_needed = 0, uses_anonymous_args = 0
		3080	1384 @ link register save eliminated.
		3081	1553:../libBME280/src/bme280.c **** uint8_t settings_changed = FALSE;
		3082	1385 .loc 1 1553 5 view .LVU346
		3083	1554:../libBME280/src/bme280.c ****
		3084	1555:../libBME280/src/bme280.c **** if (sub_settings & desired_settings)
		3085	1386 .loc 1 1555 5 view .LVU347
		3086	1387 .loc 1 1555 8 is_stmt 0 view .LVU348
		3087	1388 0000 0842 tst r0, r1
		3088	1389 0002 01D0 beq .L40
		3089	1556:../libBME280/src/bme280.c **** {
		3090	1557:../libBME280/src/bme280.c **** /* User wants to modify this particular settings */
		3091	1558:../libBME280/src/bme280.c **** settings_changed = TRUE;
		3092	1390 .loc 1 1558 26 view .LVU349
		3093	1391 0004 0120 movs r0, #1
		3094	1392 .LVL180:
		3095	1393 .loc 1 1558 26 view .LVU350
		3096	1394 0006 7047 bx lr
		3097	1395 .LVL181:
		3098	1396 .L40:
		3099	1559:../libBME280/src/bme280.c **** }
		3100	1560:../libBME280/src/bme280.c **** else
		3101	1561:../libBME280/src/bme280.c **** {
		3102	1562:../libBME280/src/bme280.c **** /* User don't want to modify this particular settings */
		3103	1563:../libBME280/src/bme280.c **** settings_changed = FALSE;
		3104	1397 .loc 1 1563 26 view .LVU351
		3105	1398 0008 0020 movs r0, #0
		3106	1399 .LVL182:
		3107	1564:../libBME280/src/bme280.c **** }
		3108	1565:../libBME280/src/bme280.c ****
		3109	1566:../libBME280/src/bme280.c **** return settings_changed;
		3110	1400 .loc 1 1566 5 is_stmt 1 view .LVU352
		3111	1567:../libBME280/src/bme280.c **** }
		3112	1401 .loc 1 1567 1 is_stmt 0 view .LVU353
		3113	1402 000a 7047 bx lr
		3114	1403 .cfi_endproc
		3115	1404 .LFE31:
		3116	1406 .section .text.null_ptr_check,"ax",%progbits
		3117	1407 .align 1
		3118	1408 .syntax unified
		3119	1409 .thumb
		3120	1410 .thumb_func
		3121	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 53
		3122
		3123
		3124	1411 .fpu softvfp
		3125	1413 null_ptr_check:
		3126	1414 .LVL183:
		3127	1415 .LFB32:
		3128	1568:../libBME280/src/bme280.c ****
		3129	1569:../libBME280/src/bme280.c **** /*!
		3130	1570:../libBME280/src/bme280.c **** * @brief This internal API is used to validate the device structure pointer for
		3131	1571:../libBME280/src/bme280.c **** * null conditions.
		3132	1572:../libBME280/src/bme280.c **** */
		3133	1573:../libBME280/src/bme280.c **** static int8_t null_ptr_check(const struct bme280_dev *dev)
		3134	1574:../libBME280/src/bme280.c **** {
		3135	1416 .loc 1 1574 1 is_stmt 1 view -0
		3136	1417 .cfi_startproc
		3137	1418 @ args = 0, pretend = 0, frame = 0
		3138	1419 @ frame_needed = 0, uses_anonymous_args = 0
		3139	1420 @ link register save eliminated.
		3140	1575:../libBME280/src/bme280.c **** int8_t rslt;
		3141	1421 .loc 1 1575 5 view .LVU355
		3142	1576:../libBME280/src/bme280.c ****
		3143	1577:../libBME280/src/bme280.c **** if ((dev == NULL) \|\| (dev->read == NULL) \|\| (dev->write == NULL) \|\| (dev->delay_us == NULL))
		3144	1422 .loc 1 1577 5 view .LVU356
		3145	1423 .loc 1 1577 8 is_stmt 0 view .LVU357
		3146	1424 0000 50B1 cbz r0, .L43
		3147	1425 .loc 1 1577 30 discriminator 1 view .LVU358
		3148	1426 0002 C268 ldr r2, [r0, #12]
		3149	1427 .loc 1 1577 23 discriminator 1 view .LVU359
		3150	1428 0004 5AB1 cbz r2, .L44
		3151	1429 .loc 1 1577 53 discriminator 2 view .LVU360
		3152	1430 0006 0269 ldr r2, [r0, #16]
		3153	1431 .loc 1 1577 46 discriminator 2 view .LVU361
		3154	1432 0008 62B1 cbz r2, .L45
		3155	1433 .loc 1 1577 77 discriminator 3 view .LVU362
		3156	1434 000a 4369 ldr r3, [r0, #20]
		3157	1435 .loc 1 1577 70 discriminator 3 view .LVU363
		3158	1436 000c 0BB1 cbz r3, .L47
		3159	1578:../libBME280/src/bme280.c **** {
		3160	1579:../libBME280/src/bme280.c **** /* Device structure pointer is not valid */
		3161	1580:../libBME280/src/bme280.c **** rslt = BME280_E_NULL_PTR;
		3162	1581:../libBME280/src/bme280.c **** }
		3163	1582:../libBME280/src/bme280.c **** else
		3164	1583:../libBME280/src/bme280.c **** {
		3165	1584:../libBME280/src/bme280.c **** /* Device structure is fine */
		3166	1585:../libBME280/src/bme280.c **** rslt = BME280_OK;
		3167	1437 .loc 1 1585 14 view .LVU364
		3168	1438 000e 0020 movs r0, #0
		3169	1439 .LVL184:
		3170	1586:../libBME280/src/bme280.c **** }
		3171	1587:../libBME280/src/bme280.c ****
		3172	1588:../libBME280/src/bme280.c **** return rslt;
		3173	1440 .loc 1 1588 5 is_stmt 1 view .LVU365
		3174	1589:../libBME280/src/bme280.c **** }
		3175	1441 .loc 1 1589 1 is_stmt 0 view .LVU366
		3176	1442 0010 7047 bx lr
		3177	1443 .LVL185:
		3178	1444 .L47:
		3179	1580:../libBME280/src/bme280.c **** }
		3180	1445 .loc 1 1580 14 view .LVU367
		3181	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 54
		3182
		3183
		3184	1446 0012 4FF0FF30 mov r0, #-1
		3185	1447 .LVL186:
		3186	1580:../libBME280/src/bme280.c **** }
		3187	1448 .loc 1 1580 14 view .LVU368
		3188	1449 0016 7047 bx lr
		3189	1450 .LVL187:
		3190	1451 .L43:
		3191	1580:../libBME280/src/bme280.c **** }
		3192	1452 .loc 1 1580 14 view .LVU369
		3193	1453 0018 4FF0FF30 mov r0, #-1
		3194	1454 .LVL188:
		3195	1580:../libBME280/src/bme280.c **** }
		3196	1455 .loc 1 1580 14 view .LVU370
		3197	1456 001c 7047 bx lr
		3198	1457 .LVL189:
		3199	1458 .L44:
		3200	1580:../libBME280/src/bme280.c **** }
		3201	1459 .loc 1 1580 14 view .LVU371
		3202	1460 001e 4FF0FF30 mov r0, #-1
		3203	1461 .LVL190:
		3204	1580:../libBME280/src/bme280.c **** }
		3205	1462 .loc 1 1580 14 view .LVU372
		3206	1463 0022 7047 bx lr
		3207	1464 .LVL191:
		3208	1465 .L45:
		3209	1580:../libBME280/src/bme280.c **** }
		3210	1466 .loc 1 1580 14 view .LVU373
		3211	1467 0024 4FF0FF30 mov r0, #-1
		3212	1468 .LVL192:
		3213	1580:../libBME280/src/bme280.c **** }
		3214	1469 .loc 1 1580 14 view .LVU374
		3215	1470 0028 7047 bx lr
		3216	1471 .cfi_endproc
		3217	1472 .LFE32:
		3218	1474 .section .text.bme280_get_regs,"ax",%progbits
		3219	1475 .align 1
		3220	1476 .global bme280_get_regs
		3221	1477 .syntax unified
		3222	1478 .thumb
		3223	1479 .thumb_func
		3224	1480 .fpu softvfp
		3225	1482 bme280_get_regs:
		3226	1483 .LVL193:
		3227	1484 .LFB1:
		3228	459:../libBME280/src/bme280.c **** int8_t rslt;
		3229	1485 .loc 1 459 1 is_stmt 1 view -0
		3230	1486 .cfi_startproc
		3231	1487 @ args = 0, pretend = 0, frame = 0
		3232	1488 @ frame_needed = 0, uses_anonymous_args = 0
		3233	459:../libBME280/src/bme280.c **** int8_t rslt;
		3234	1489 .loc 1 459 1 is_stmt 0 view .LVU376
		3235	1490 0000 2DE9F843 push {r3, r4, r5, r6, r7, r8, r9, lr}
		3236	1491 .LCFI7:
		3237	1492 .cfi_def_cfa_offset 32
		3238	1493 .cfi_offset 3, -32
		3239	1494 .cfi_offset 4, -28
		3240	1495 .cfi_offset 5, -24
		3241	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 55
		3242
		3243
		3244	1496 .cfi_offset 6, -20
		3245	1497 .cfi_offset 7, -16
		3246	1498 .cfi_offset 8, -12
		3247	1499 .cfi_offset 9, -8
		3248	1500 .cfi_offset 14, -4
		3249	1501 0004 0546 mov r5, r0
		3250	1502 0006 0E46 mov r6, r1
		3251	1503 0008 9146 mov r9, r2
		3252	1504 000a 1C46 mov r4, r3
		3253	460:../libBME280/src/bme280.c ****
		3254	1505 .loc 1 460 5 is_stmt 1 view .LVU377
		3255	463:../libBME280/src/bme280.c ****
		3256	1506 .loc 1 463 5 view .LVU378
		3257	463:../libBME280/src/bme280.c ****
		3258	1507 .loc 1 463 12 is_stmt 0 view .LVU379
		3259	1508 000c 1846 mov r0, r3
		3260	1509 .LVL194:
		3261	463:../libBME280/src/bme280.c ****
		3262	1510 .loc 1 463 12 view .LVU380
		3263	1511 000e FFF7FEFF bl null_ptr_check
		3264	1512 .LVL195:
		3265	466:../libBME280/src/bme280.c **** {
		3266	1513 .loc 1 466 5 is_stmt 1 view .LVU381
		3267	466:../libBME280/src/bme280.c **** {
		3268	1514 .loc 1 466 8 is_stmt 0 view .LVU382
		3269	1515 0012 90B9 cbnz r0, .L51
		3270	1516 0014 8046 mov r8, r0
		3271	466:../libBME280/src/bme280.c **** {
		3272	1517 .loc 1 466 29 discriminator 1 view .LVU383
		3273	1518 0016 9EB1 cbz r6, .L52
		3274	469:../libBME280/src/bme280.c **** {
		3275	1519 .loc 1 469 9 is_stmt 1 view .LVU384
		3276	469:../libBME280/src/bme280.c **** {
		3277	1520 .loc 1 469 16 is_stmt 0 view .LVU385
		3278	1521 0018 237A ldrb r3, [r4, #8] @ zero_extendqisi2
		3279	469:../libBME280/src/bme280.c **** {
		3280	1522 .loc 1 469 12 view .LVU386
		3281	1523 001a 012B cmp r3, #1
		3282	1524 001c 01D0 beq .L50
		3283	471:../libBME280/src/bme280.c **** }
		3284	1525 .loc 1 471 13 is_stmt 1 view .LVU387
		3285	471:../libBME280/src/bme280.c **** }
		3286	1526 .loc 1 471 22 is_stmt 0 view .LVU388
		3287	1527 001e 45F08005 orr r5, r5, #128
		3288	1528 .LVL196:
		3289	1529 .L50:
		3290	475:../libBME280/src/bme280.c ****
		3291	1530 .loc 1 475 9 is_stmt 1 view .LVU389
		3292	475:../libBME280/src/bme280.c ****
		3293	1531 .loc 1 475 29 is_stmt 0 view .LVU390
		3294	1532 0022 E768 ldr r7, [r4, #12]
		3295	475:../libBME280/src/bme280.c ****
		3296	1533 .loc 1 475 26 view .LVU391
		3297	1534 0024 6368 ldr r3, [r4, #4]
		3298	1535 0026 4A46 mov r2, r9
		3299	1536 0028 3146 mov r1, r6
		3300	1537 002a 2846 mov r0, r5
		3301	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 56
		3302
		3303
		3304	1538 .LVL197:
		3305	475:../libBME280/src/bme280.c ****
		3306	1539 .loc 1 475 26 view .LVU392
		3307	1540 002c B847 blx r7
		3308	1541 .LVL198:
		3309	475:../libBME280/src/bme280.c ****
		3310	1542 .loc 1 475 24 view .LVU393
		3311	1543 002e 84F84500 strb r0, [r4, #69]
		3312	478:../libBME280/src/bme280.c **** {
		3313	1544 .loc 1 478 9 is_stmt 1 view .LVU394
		3314	478:../libBME280/src/bme280.c **** {
		3315	1545 .loc 1 478 12 is_stmt 0 view .LVU395
		3316	1546 0032 40B9 cbnz r0, .L55
		3317	1547 .LVL199:
		3318	1548 .L49:
		3319	488:../libBME280/src/bme280.c **** }
		3320	1549 .loc 1 488 5 is_stmt 1 view .LVU396
		3321	489:../libBME280/src/bme280.c ****
		3322	1550 .loc 1 489 1 is_stmt 0 view .LVU397
		3323	1551 0034 4046 mov r0, r8
		3324	1552 0036 BDE8F883 pop {r3, r4, r5, r6, r7, r8, r9, pc}
		3325	1553 .LVL200:
		3326	1554 .L51:
		3327	485:../libBME280/src/bme280.c **** }
		3328	1555 .loc 1 485 14 view .LVU398
		3329	1556 003a 4FF0FF38 mov r8, #-1
		3330	1557 003e F9E7 b .L49
		3331	1558 .L52:
		3332	1559 0040 4FF0FF38 mov r8, #-1
		3333	1560 0044 F6E7 b .L49
		3334	1561 .LVL201:
		3335	1562 .L55:
		3336	480:../libBME280/src/bme280.c **** }
		3337	1563 .loc 1 480 18 view .LVU399
		3338	1564 0046 6FF00308 mvn r8, #3
		3339	1565 004a F3E7 b .L49
		3340	1566 .cfi_endproc
		3341	1567 .LFE1:
		3342	1569 .section .text.get_calib_data,"ax",%progbits
		3343	1570 .align 1
		3344	1571 .syntax unified
		3345	1572 .thumb
		3346	1573 .thumb_func
		3347	1574 .fpu softvfp
		3348	1576 get_calib_data:
		3349	1577 .LVL202:
		3350	1578 .LFB27:
		3351	1453:../libBME280/src/bme280.c **** int8_t rslt;
		3352	1579 .loc 1 1453 1 is_stmt 1 view -0
		3353	1580 .cfi_startproc
		3354	1581 @ args = 0, pretend = 0, frame = 32
		3355	1582 @ frame_needed = 0, uses_anonymous_args = 0
		3356	1453:../libBME280/src/bme280.c **** int8_t rslt;
		3357	1583 .loc 1 1453 1 is_stmt 0 view .LVU401
		3358	1584 0000 30B5 push {r4, r5, lr}
		3359	1585 .LCFI8:
		3360	1586 .cfi_def_cfa_offset 12
		3361	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 57
		3362
		3363
		3364	1587 .cfi_offset 4, -12
		3365	1588 .cfi_offset 5, -8
		3366	1589 .cfi_offset 14, -4
		3367	1590 0002 89B0 sub sp, sp, #36
		3368	1591 .LCFI9:
		3369	1592 .cfi_def_cfa_offset 48
		3370	1593 0004 0446 mov r4, r0
		3371	1454:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_TEMP_PRESS_CALIB_DATA_ADDR;
		3372	1594 .loc 1 1454 5 is_stmt 1 view .LVU402
		3373	1455:../libBME280/src/bme280.c ****
		3374	1595 .loc 1 1455 5 view .LVU403
		3375	1596 .LVL203:
		3376	1458:../libBME280/src/bme280.c ****
		3377	1597 .loc 1 1458 5 view .LVU404
		3378	1458:../libBME280/src/bme280.c ****
		3379	1598 .loc 1 1458 13 is_stmt 0 view .LVU405
		3380	1599 0006 0023 movs r3, #0
		3381	1600 0008 0193 str r3, [sp, #4]
		3382	1601 000a 0293 str r3, [sp, #8]
		3383	1602 000c 0393 str r3, [sp, #12]
		3384	1603 000e 0493 str r3, [sp, #16]
		3385	1604 0010 0593 str r3, [sp, #20]
		3386	1605 0012 0693 str r3, [sp, #24]
		3387	1606 0014 ADF81C30 strh r3, [sp, #28] @ movhi
		3388	1461:../libBME280/src/bme280.c ****
		3389	1607 .loc 1 1461 5 is_stmt 1 view .LVU406
		3390	1461:../libBME280/src/bme280.c ****
		3391	1608 .loc 1 1461 12 is_stmt 0 view .LVU407
		3392	1609 0018 0346 mov r3, r0
		3393	1610 001a 1A22 movs r2, #26
		3394	1611 001c 01A9 add r1, sp, #4
		3395	1612 001e 8820 movs r0, #136
		3396	1613 .LVL204:
		3397	1461:../libBME280/src/bme280.c ****
		3398	1614 .loc 1 1461 12 view .LVU408
		3399	1615 0020 FFF7FEFF bl bme280_get_regs
		3400	1616 .LVL205:
		3401	1463:../libBME280/src/bme280.c **** {
		3402	1617 .loc 1 1463 5 is_stmt 1 view .LVU409
		3403	1463:../libBME280/src/bme280.c **** {
		3404	1618 .loc 1 1463 8 is_stmt 0 view .LVU410
		3405	1619 0024 0546 mov r5, r0
		3406	1620 0026 10B1 cbz r0, .L59
		3407	1621 .LVL206:
		3408	1622 .L57:
		3409	1483:../libBME280/src/bme280.c **** }
		3410	1623 .loc 1 1483 5 is_stmt 1 view .LVU411
		3411	1484:../libBME280/src/bme280.c ****
		3412	1624 .loc 1 1484 1 is_stmt 0 view .LVU412
		3413	1625 0028 2846 mov r0, r5
		3414	1626 002a 09B0 add sp, sp, #36
		3415	1627 .LCFI10:
		3416	1628 .cfi_remember_state
		3417	1629 .cfi_def_cfa_offset 12
		3418	1630 @ sp needed
		3419	1631 002c 30BD pop {r4, r5, pc}
		3420	1632 .LVL207:
		3421	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 58
		3422
		3423
		3424	1633 .L59:
		3425	1634 .LCFI11:
		3426	1635 .cfi_restore_state
		3427	1468:../libBME280/src/bme280.c **** reg_addr = BME280_HUMIDITY_CALIB_DATA_ADDR;
		3428	1636 .loc 1 1468 9 is_stmt 1 view .LVU413
		3429	1637 002e 2146 mov r1, r4
		3430	1638 0030 01A8 add r0, sp, #4
		3431	1639 .LVL208:
		3432	1468:../libBME280/src/bme280.c **** reg_addr = BME280_HUMIDITY_CALIB_DATA_ADDR;
		3433	1640 .loc 1 1468 9 is_stmt 0 view .LVU414
		3434	1641 0032 FFF7FEFF bl parse_temp_press_calib_data
		3435	1642 .LVL209:
		3436	1469:../libBME280/src/bme280.c ****
		3437	1643 .loc 1 1469 9 is_stmt 1 view .LVU415
		3438	1472:../libBME280/src/bme280.c ****
		3439	1644 .loc 1 1472 9 view .LVU416
		3440	1472:../libBME280/src/bme280.c ****
		3441	1645 .loc 1 1472 16 is_stmt 0 view .LVU417
		3442	1646 0036 2346 mov r3, r4
		3443	1647 0038 0722 movs r2, #7
		3444	1648 003a 01A9 add r1, sp, #4
		3445	1649 003c E120 movs r0, #225
		3446	1650 003e FFF7FEFF bl bme280_get_regs
		3447	1651 .LVL210:
		3448	1474:../libBME280/src/bme280.c **** {
		3449	1652 .loc 1 1474 9 is_stmt 1 view .LVU418
		3450	1474:../libBME280/src/bme280.c **** {
		3451	1653 .loc 1 1474 12 is_stmt 0 view .LVU419
		3452	1654 0042 0546 mov r5, r0
		3453	1655 0044 0028 cmp r0, #0
		3454	1656 0046 EFD1 bne .L57
		3455	1479:../libBME280/src/bme280.c **** }
		3456	1657 .loc 1 1479 13 is_stmt 1 view .LVU420
		3457	1658 0048 2146 mov r1, r4
		3458	1659 004a 01A8 add r0, sp, #4
		3459	1660 .LVL211:
		3460	1479:../libBME280/src/bme280.c **** }
		3461	1661 .loc 1 1479 13 is_stmt 0 view .LVU421
		3462	1662 004c FFF7FEFF bl parse_humidity_calib_data
		3463	1663 .LVL212:
		3464	1664 0050 EAE7 b .L57
		3465	1665 .cfi_endproc
		3466	1666 .LFE27:
		3467	1668 .section .text.bme280_set_regs,"ax",%progbits
		3468	1669 .align 1
		3469	1670 .global bme280_set_regs
		3470	1671 .syntax unified
		3471	1672 .thumb
		3472	1673 .thumb_func
		3473	1674 .fpu softvfp
		3474	1676 bme280_set_regs:
		3475	1677 .LVL213:
		3476	1678 .LFB2:
		3477	496:../libBME280/src/bme280.c **** int8_t rslt;
		3478	1679 .loc 1 496 1 is_stmt 1 view -0
		3479	1680 .cfi_startproc
		3480	1681 @ args = 0, pretend = 0, frame = 24
		3481	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 59
		3482
		3483
		3484	1682 @ frame_needed = 0, uses_anonymous_args = 0
		3485	496:../libBME280/src/bme280.c **** int8_t rslt;
		3486	1683 .loc 1 496 1 is_stmt 0 view .LVU423
		3487	1684 0000 2DE9F041 push {r4, r5, r6, r7, r8, lr}
		3488	1685 .LCFI12:
		3489	1686 .cfi_def_cfa_offset 24
		3490	1687 .cfi_offset 4, -24
		3491	1688 .cfi_offset 5, -20
		3492	1689 .cfi_offset 6, -16
		3493	1690 .cfi_offset 7, -12
		3494	1691 .cfi_offset 8, -8
		3495	1692 .cfi_offset 14, -4
		3496	1693 0004 86B0 sub sp, sp, #24
		3497	1694 .LCFI13:
		3498	1695 .cfi_def_cfa_offset 48
		3499	1696 0006 0546 mov r5, r0
		3500	1697 0008 0F46 mov r7, r1
		3501	1698 000a 1446 mov r4, r2
		3502	1699 000c 1E46 mov r6, r3
		3503	497:../libBME280/src/bme280.c **** uint8_t temp_buff[20]; /* Typically not to write more than 10 registers */
		3504	1700 .loc 1 497 5 is_stmt 1 view .LVU424
		3505	498:../libBME280/src/bme280.c ****
		3506	1701 .loc 1 498 5 view .LVU425
		3507	500:../libBME280/src/bme280.c **** {
		3508	1702 .loc 1 500 5 view .LVU426
		3509	500:../libBME280/src/bme280.c **** {
		3510	1703 .loc 1 500 8 is_stmt 0 view .LVU427
		3511	1704 000e 0A2A cmp r2, #10
		3512	1705 0010 00D9 bls .L61
		3513	502:../libBME280/src/bme280.c **** }
		3514	1706 .loc 1 502 13 view .LVU428
		3515	1707 0012 0A24 movs r4, #10
		3516	1708 .L61:
		3517	1709 .LVL214:
		3518	505:../libBME280/src/bme280.c **** uint8_t reg_addr_cnt;
		3519	1710 .loc 1 505 5 is_stmt 1 view .LVU429
		3520	506:../libBME280/src/bme280.c ****
		3521	1711 .loc 1 506 5 view .LVU430
		3522	509:../libBME280/src/bme280.c ****
		3523	1712 .loc 1 509 5 view .LVU431
		3524	509:../libBME280/src/bme280.c ****
		3525	1713 .loc 1 509 12 is_stmt 0 view .LVU432
		3526	1714 0014 3046 mov r0, r6
		3527	1715 .LVL215:
		3528	509:../libBME280/src/bme280.c ****
		3529	1716 .loc 1 509 12 view .LVU433
		3530	1717 0016 FFF7FEFF bl null_ptr_check
		3531	1718 .LVL216:
		3532	512:../libBME280/src/bme280.c **** {
		3533	1719 .loc 1 512 5 is_stmt 1 view .LVU434
		3534	512:../libBME280/src/bme280.c **** {
		3535	1720 .loc 1 512 8 is_stmt 0 view .LVU435
		3536	1721 001a 8046 mov r8, r0
		3537	1722 001c 58BB cbnz r0, .L69
		3538	512:../libBME280/src/bme280.c **** {
		3539	1723 .loc 1 512 29 discriminator 1 view .LVU436
		3540	1724 001e 6DB3 cbz r5, .L70
		3541	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 60
		3542
		3543
		3544	512:../libBME280/src/bme280.c **** {
		3545	1725 .loc 1 512 51 discriminator 2 view .LVU437
		3546	1726 0020 7FB3 cbz r7, .L71
		3547	514:../libBME280/src/bme280.c **** {
		3548	1727 .loc 1 514 9 is_stmt 1 view .LVU438
		3549	514:../libBME280/src/bme280.c **** {
		3550	1728 .loc 1 514 12 is_stmt 0 view .LVU439
		3551	1729 0022 8CB3 cbz r4, .L72
		3552	516:../libBME280/src/bme280.c ****
		3553	1730 .loc 1 516 13 is_stmt 1 view .LVU440
		3554	516:../libBME280/src/bme280.c ****
		3555	1731 .loc 1 516 36 is_stmt 0 view .LVU441
		3556	1732 0024 3B78 ldrb r3, [r7] @ zero_extendqisi2
		3557	516:../libBME280/src/bme280.c ****
		3558	1733 .loc 1 516 26 view .LVU442
		3559	1734 0026 8DF80430 strb r3, [sp, #4]
		3560	519:../libBME280/src/bme280.c **** {
		3561	1735 .loc 1 519 13 is_stmt 1 view .LVU443
		3562	519:../libBME280/src/bme280.c **** {
		3563	1736 .loc 1 519 20 is_stmt 0 view .LVU444
		3564	1737 002a 337A ldrb r3, [r6, #8] @ zero_extendqisi2
		3565	519:../libBME280/src/bme280.c **** {
		3566	1738 .loc 1 519 16 view .LVU445
		3567	1739 002c 012B cmp r3, #1
		3568	1740 002e 09D0 beq .L64
		3569	521:../libBME280/src/bme280.c **** {
		3570	1741 .loc 1 521 35 view .LVU446
		3571	1742 0030 0023 movs r3, #0
		3572	1743 .L63:
		3573	1744 .LVL217:
		3574	521:../libBME280/src/bme280.c **** {
		3575	1745 .loc 1 521 17 discriminator 1 view .LVU447
		3576	1746 0032 9C42 cmp r4, r3
		3577	1747 0034 06D9 bls .L64
		3578	523:../libBME280/src/bme280.c **** }
		3579	1748 .loc 1 523 21 is_stmt 1 discriminator 3 view .LVU448
		3580	523:../libBME280/src/bme280.c **** }
		3581	1749 .loc 1 523 54 is_stmt 0 discriminator 3 view .LVU449
		3582	1750 0036 E95C ldrb r1, [r5, r3] @ zero_extendqisi2
		3583	523:../libBME280/src/bme280.c **** }
		3584	1751 .loc 1 523 69 discriminator 3 view .LVU450
		3585	1752 0038 01F07F01 and r1, r1, #127
		3586	523:../libBME280/src/bme280.c **** }
		3587	1753 .loc 1 523 44 discriminator 3 view .LVU451
		3588	1754 003c E954 strb r1, [r5, r3]
		3589	521:../libBME280/src/bme280.c **** {
		3590	1755 .loc 1 521 72 discriminator 3 view .LVU452
		3591	1756 003e 0133 adds r3, r3, #1
		3592	1757 .LVL218:
		3593	521:../libBME280/src/bme280.c **** {
		3594	1758 .loc 1 521 72 discriminator 3 view .LVU453
		3595	1759 0040 DBB2 uxtb r3, r3
		3596	1760 .LVL219:
		3597	521:../libBME280/src/bme280.c **** {
		3598	1761 .loc 1 521 72 discriminator 3 view .LVU454
		3599	1762 0042 F6E7 b .L63
		3600	1763 .LVL220:
		3601	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 61
		3602
		3603
		3604	1764 .L64:
		3605	528:../libBME280/src/bme280.c **** {
		3606	1765 .loc 1 528 13 is_stmt 1 view .LVU455
		3607	528:../libBME280/src/bme280.c **** {
		3608	1766 .loc 1 528 16 is_stmt 0 view .LVU456
		3609	1767 0044 012C cmp r4, #1
		3610	1768 0046 0CD8 bhi .L76
		3611	538:../libBME280/src/bme280.c **** }
		3612	1769 .loc 1 538 17 is_stmt 1 view .LVU457
		3613	538:../libBME280/src/bme280.c **** }
		3614	1770 .loc 1 538 26 is_stmt 0 view .LVU458
		3615	1771 0048 A2B2 uxth r2, r4
		3616	1772 .LVL221:
		3617	1773 .L67:
		3618	541:../libBME280/src/bme280.c ****
		3619	1774 .loc 1 541 13 is_stmt 1 view .LVU459
		3620	541:../libBME280/src/bme280.c ****
		3621	1775 .loc 1 541 33 is_stmt 0 view .LVU460
		3622	1776 004a 3769 ldr r7, [r6, #16]
		3623	1777 .LVL222:
		3624	541:../libBME280/src/bme280.c ****
		3625	1778 .loc 1 541 30 view .LVU461
		3626	1779 004c 7368 ldr r3, [r6, #4]
		3627	1780 004e 01A9 add r1, sp, #4
		3628	1781 0050 2878 ldrb r0, [r5] @ zero_extendqisi2
		3629	1782 0052 B847 blx r7
		3630	1783 .LVL223:
		3631	541:../libBME280/src/bme280.c ****
		3632	1784 .loc 1 541 28 view .LVU462
		3633	1785 0054 86F84500 strb r0, [r6, #69]
		3634	544:../libBME280/src/bme280.c **** {
		3635	1786 .loc 1 544 13 is_stmt 1 view .LVU463
		3636	544:../libBME280/src/bme280.c **** {
		3637	1787 .loc 1 544 16 is_stmt 0 view .LVU464
		3638	1788 0058 C8B9 cbnz r0, .L77
		3639	1789 .L62:
		3640	1790 .LVL224:
		3641	559:../libBME280/src/bme280.c **** }
		3642	1791 .loc 1 559 5 is_stmt 1 view .LVU465
		3643	560:../libBME280/src/bme280.c ****
		3644	1792 .loc 1 560 1 is_stmt 0 view .LVU466
		3645	1793 005a 4046 mov r0, r8
		3646	1794 005c 06B0 add sp, sp, #24
		3647	1795 .LCFI14:
		3648	1796 .cfi_remember_state
		3649	1797 .cfi_def_cfa_offset 24
		3650	1798 @ sp needed
		3651	1799 005e BDE8F081 pop {r4, r5, r6, r7, r8, pc}
		3652	1800 .LVL225:
		3653	1801 .L76:
		3654	1802 .LCFI15:
		3655	1803 .cfi_restore_state
		3656	533:../libBME280/src/bme280.c **** temp_len = ((len * 2) - 1);
		3657	1804 .loc 1 533 17 is_stmt 1 view .LVU467
		3658	1805 0062 2346 mov r3, r4
		3659	1806 0064 3A46 mov r2, r7
		3660	1807 0066 01A9 add r1, sp, #4
		3661	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 62
		3662
		3663
		3664	1808 0068 2846 mov r0, r5
		3665	1809 .LVL226:
		3666	533:../libBME280/src/bme280.c **** temp_len = ((len * 2) - 1);
		3667	1810 .loc 1 533 17 is_stmt 0 view .LVU468
		3668	1811 006a FFF7FEFF bl interleave_reg_addr
		3669	1812 .LVL227:
		3670	534:../libBME280/src/bme280.c **** }
		3671	1813 .loc 1 534 17 is_stmt 1 view .LVU469
		3672	534:../libBME280/src/bme280.c **** }
		3673	1814 .loc 1 534 39 is_stmt 0 view .LVU470
		3674	1815 006e 6400 lsls r4, r4, #1
		3675	1816 .LVL228:
		3676	534:../libBME280/src/bme280.c **** }
		3677	1817 .loc 1 534 26 view .LVU471
		3678	1818 0070 013C subs r4, r4, #1
		3679	1819 0072 A2B2 uxth r2, r4
		3680	1820 .LVL229:
		3681	534:../libBME280/src/bme280.c **** }
		3682	1821 .loc 1 534 26 view .LVU472
		3683	1822 0074 E9E7 b .L67
		3684	1823 .LVL230:
		3685	1824 .L69:
		3686	556:../libBME280/src/bme280.c **** }
		3687	1825 .loc 1 556 14 view .LVU473
		3688	1826 0076 4FF0FF38 mov r8, #-1
		3689	1827 007a EEE7 b .L62
		3690	1828 .L70:
		3691	1829 007c 4FF0FF38 mov r8, #-1
		3692	1830 0080 EBE7 b .L62
		3693	1831 .L71:
		3694	1832 0082 4FF0FF38 mov r8, #-1
		3695	1833 0086 E8E7 b .L62
		3696	1834 .L72:
		3697	551:../libBME280/src/bme280.c **** }
		3698	1835 .loc 1 551 18 view .LVU474
		3699	1836 0088 6FF00208 mvn r8, #2
		3700	1837 008c E5E7 b .L62
		3701	1838 .LVL231:
		3702	1839 .L77:
		3703	546:../libBME280/src/bme280.c **** }
		3704	1840 .loc 1 546 22 view .LVU475
		3705	1841 008e 6FF00308 mvn r8, #3
		3706	1842 0092 E2E7 b .L62
		3707	1843 .cfi_endproc
		3708	1844 .LFE2:
		3709	1846 .section .text.set_osr_humidity_settings,"ax",%progbits
		3710	1847 .align 1
		3711	1848 .syntax unified
		3712	1849 .thumb
		3713	1850 .thumb_func
		3714	1851 .fpu softvfp
		3715	1853 set_osr_humidity_settings:
		3716	1854 .LVL232:
		3717	1855 .LFB13:
		3718	927:../libBME280/src/bme280.c **** int8_t rslt;
		3719	1856 .loc 1 927 1 is_stmt 1 view -0
		3720	1857 .cfi_startproc
		3721	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 63
		3722
		3723
		3724	1858 @ args = 0, pretend = 0, frame = 8
		3725	1859 @ frame_needed = 0, uses_anonymous_args = 0
		3726	927:../libBME280/src/bme280.c **** int8_t rslt;
		3727	1860 .loc 1 927 1 is_stmt 0 view .LVU477
		3728	1861 0000 10B5 push {r4, lr}
		3729	1862 .LCFI16:
		3730	1863 .cfi_def_cfa_offset 8
		3731	1864 .cfi_offset 4, -8
		3732	1865 .cfi_offset 14, -4
		3733	1866 0002 82B0 sub sp, sp, #8
		3734	1867 .LCFI17:
		3735	1868 .cfi_def_cfa_offset 16
		3736	1869 0004 0C46 mov r4, r1
		3737	928:../libBME280/src/bme280.c **** uint8_t ctrl_hum;
		3738	1870 .loc 1 928 5 is_stmt 1 view .LVU478
		3739	929:../libBME280/src/bme280.c **** uint8_t ctrl_meas;
		3740	1871 .loc 1 929 5 view .LVU479
		3741	930:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_CTRL_HUM_ADDR;
		3742	1872 .loc 1 930 5 view .LVU480
		3743	931:../libBME280/src/bme280.c ****
		3744	1873 .loc 1 931 5 view .LVU481
		3745	931:../libBME280/src/bme280.c ****
		3746	1874 .loc 1 931 13 is_stmt 0 view .LVU482
		3747	1875 0006 F223 movs r3, #242
		3748	1876 0008 8DF80530 strb r3, [sp, #5]
		3749	933:../libBME280/src/bme280.c ****
		3750	1877 .loc 1 933 5 is_stmt 1 view .LVU483
		3751	933:../libBME280/src/bme280.c ****
		3752	1878 .loc 1 933 24 is_stmt 0 view .LVU484
		3753	1879 000c 8378 ldrb r3, [r0, #2] @ zero_extendqisi2
		3754	933:../libBME280/src/bme280.c ****
		3755	1880 .loc 1 933 32 view .LVU485
		3756	1881 000e 03F00703 and r3, r3, #7
		3757	933:../libBME280/src/bme280.c ****
		3758	1882 .loc 1 933 14 view .LVU486
		3759	1883 0012 8DF80730 strb r3, [sp, #7]
		3760	936:../libBME280/src/bme280.c ****
		3761	1884 .loc 1 936 5 is_stmt 1 view .LVU487
		3762	936:../libBME280/src/bme280.c ****
		3763	1885 .loc 1 936 12 is_stmt 0 view .LVU488
		3764	1886 0016 0B46 mov r3, r1
		3765	1887 0018 0122 movs r2, #1
		3766	1888 001a 0DF10701 add r1, sp, #7
		3767	1889 .LVL233:
		3768	936:../libBME280/src/bme280.c ****
		3769	1890 .loc 1 936 12 view .LVU489
		3770	1891 001e 0DF10500 add r0, sp, #5
		3771	1892 .LVL234:
		3772	936:../libBME280/src/bme280.c ****
		3773	1893 .loc 1 936 12 view .LVU490
		3774	1894 0022 FFF7FEFF bl bme280_set_regs
		3775	1895 .LVL235:
		3776	941:../libBME280/src/bme280.c **** {
		3777	1896 .loc 1 941 5 is_stmt 1 view .LVU491
		3778	941:../libBME280/src/bme280.c **** {
		3779	1897 .loc 1 941 8 is_stmt 0 view .LVU492
		3780	1898 0026 0346 mov r3, r0
		3781	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 64
		3782
		3783
		3784	1899 0028 10B1 cbz r0, .L81
		3785	1900 .LVL236:
		3786	1901 .L79:
		3787	952:../libBME280/src/bme280.c **** }
		3788	1902 .loc 1 952 5 is_stmt 1 view .LVU493
		3789	953:../libBME280/src/bme280.c ****
		3790	1903 .loc 1 953 1 is_stmt 0 view .LVU494
		3791	1904 002a 1846 mov r0, r3
		3792	1905 002c 02B0 add sp, sp, #8
		3793	1906 .LCFI18:
		3794	1907 .cfi_remember_state
		3795	1908 .cfi_def_cfa_offset 8
		3796	1909 @ sp needed
		3797	1910 002e 10BD pop {r4, pc}
		3798	1911 .LVL237:
		3799	1912 .L81:
		3800	1913 .LCFI19:
		3801	1914 .cfi_restore_state
		3802	943:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, &ctrl_meas, 1, dev);
		3803	1915 .loc 1 943 9 is_stmt 1 view .LVU495
		3804	943:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, &ctrl_meas, 1, dev);
		3805	1916 .loc 1 943 18 is_stmt 0 view .LVU496
		3806	1917 0030 F420 movs r0, #244
		3807	1918 .LVL238:
		3808	943:../libBME280/src/bme280.c **** rslt = bme280_get_regs(reg_addr, &ctrl_meas, 1, dev);
		3809	1919 .loc 1 943 18 view .LVU497
		3810	1920 0032 8DF80500 strb r0, [sp, #5]
		3811	944:../libBME280/src/bme280.c ****
		3812	1921 .loc 1 944 9 is_stmt 1 view .LVU498
		3813	944:../libBME280/src/bme280.c ****
		3814	1922 .loc 1 944 16 is_stmt 0 view .LVU499
		3815	1923 0036 2346 mov r3, r4
		3816	1924 0038 0122 movs r2, #1
		3817	1925 003a 0DF10601 add r1, sp, #6
		3818	1926 003e FFF7FEFF bl bme280_get_regs
		3819	1927 .LVL239:
		3820	946:../libBME280/src/bme280.c **** {
		3821	1928 .loc 1 946 9 is_stmt 1 view .LVU500
		3822	946:../libBME280/src/bme280.c **** {
		3823	1929 .loc 1 946 12 is_stmt 0 view .LVU501
		3824	1930 0042 0346 mov r3, r0
		3825	1931 0044 0028 cmp r0, #0
		3826	1932 0046 F0D1 bne .L79
		3827	948:../libBME280/src/bme280.c **** }
		3828	1933 .loc 1 948 13 is_stmt 1 view .LVU502
		3829	948:../libBME280/src/bme280.c **** }
		3830	1934 .loc 1 948 20 is_stmt 0 view .LVU503
		3831	1935 0048 2346 mov r3, r4
		3832	1936 004a 0122 movs r2, #1
		3833	1937 004c 0DF10601 add r1, sp, #6
		3834	1938 0050 0DF10500 add r0, sp, #5
		3835	1939 .LVL240:
		3836	948:../libBME280/src/bme280.c **** }
		3837	1940 .loc 1 948 20 view .LVU504
		3838	1941 0054 FFF7FEFF bl bme280_set_regs
		3839	1942 .LVL241:
		3840	1943 0058 0346 mov r3, r0
		3841	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 65
		3842
		3843
		3844	1944 .LVL242:
		3845	948:../libBME280/src/bme280.c **** }
		3846	1945 .loc 1 948 20 view .LVU505
		3847	1946 005a E6E7 b .L79
		3848	1947 .cfi_endproc
		3849	1948 .LFE13:
		3850	1950 .section .text.set_osr_press_temp_settings,"ax",%progbits
		3851	1951 .align 1
		3852	1952 .syntax unified
		3853	1953 .thumb
		3854	1954 .thumb_func
		3855	1955 .fpu softvfp
		3856	1957 set_osr_press_temp_settings:
		3857	1958 .LVL243:
		3858	1959 .LFB14:
		3859	962:../libBME280/src/bme280.c **** int8_t rslt;
		3860	1960 .loc 1 962 1 is_stmt 1 view -0
		3861	1961 .cfi_startproc
		3862	1962 @ args = 0, pretend = 0, frame = 8
		3863	1963 @ frame_needed = 0, uses_anonymous_args = 0
		3864	962:../libBME280/src/bme280.c **** int8_t rslt;
		3865	1964 .loc 1 962 1 is_stmt 0 view .LVU507
		3866	1965 0000 70B5 push {r4, r5, r6, lr}
		3867	1966 .LCFI20:
		3868	1967 .cfi_def_cfa_offset 16
		3869	1968 .cfi_offset 4, -16
		3870	1969 .cfi_offset 5, -12
		3871	1970 .cfi_offset 6, -8
		3872	1971 .cfi_offset 14, -4
		3873	1972 0002 82B0 sub sp, sp, #8
		3874	1973 .LCFI21:
		3875	1974 .cfi_def_cfa_offset 24
		3876	1975 0004 0546 mov r5, r0
		3877	1976 0006 0E46 mov r6, r1
		3878	1977 0008 1446 mov r4, r2
		3879	963:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_CTRL_MEAS_ADDR;
		3880	1978 .loc 1 963 5 is_stmt 1 view .LVU508
		3881	964:../libBME280/src/bme280.c **** uint8_t reg_data;
		3882	1979 .loc 1 964 5 view .LVU509
		3883	964:../libBME280/src/bme280.c **** uint8_t reg_data;
		3884	1980 .loc 1 964 13 is_stmt 0 view .LVU510
		3885	1981 000a F420 movs r0, #244
		3886	1982 .LVL244:
		3887	964:../libBME280/src/bme280.c **** uint8_t reg_data;
		3888	1983 .loc 1 964 13 view .LVU511
		3889	1984 000c 8DF80700 strb r0, [sp, #7]
		3890	965:../libBME280/src/bme280.c ****
		3891	1985 .loc 1 965 5 is_stmt 1 view .LVU512
		3892	967:../libBME280/src/bme280.c ****
		3893	1986 .loc 1 967 5 view .LVU513
		3894	967:../libBME280/src/bme280.c ****
		3895	1987 .loc 1 967 12 is_stmt 0 view .LVU514
		3896	1988 0010 1346 mov r3, r2
		3897	1989 0012 0122 movs r2, #1
		3898	1990 .LVL245:
		3899	967:../libBME280/src/bme280.c ****
		3900	1991 .loc 1 967 12 view .LVU515
		3901	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 66
		3902
		3903
		3904	1992 0014 0DF10601 add r1, sp, #6
		3905	1993 .LVL246:
		3906	967:../libBME280/src/bme280.c ****
		3907	1994 .loc 1 967 12 view .LVU516
		3908	1995 0018 FFF7FEFF bl bme280_get_regs
		3909	1996 .LVL247:
		3910	969:../libBME280/src/bme280.c **** {
		3911	1997 .loc 1 969 5 is_stmt 1 view .LVU517
		3912	969:../libBME280/src/bme280.c **** {
		3913	1998 .loc 1 969 8 is_stmt 0 view .LVU518
		3914	1999 001c 0346 mov r3, r0
		3915	2000 001e 70B9 cbnz r0, .L83
		3916	971:../libBME280/src/bme280.c **** {
		3917	2001 .loc 1 971 9 is_stmt 1 view .LVU519
		3918	971:../libBME280/src/bme280.c **** {
		3919	2002 .loc 1 971 12 is_stmt 0 view .LVU520
		3920	2003 0020 15F0010F tst r5, #1
		3921	2004 0024 0ED1 bne .L87
		3922	2005 .LVL248:
		3923	2006 .L84:
		3924	976:../libBME280/src/bme280.c **** {
		3925	2007 .loc 1 976 9 is_stmt 1 view .LVU521
		3926	976:../libBME280/src/bme280.c **** {
		3927	2008 .loc 1 976 12 is_stmt 0 view .LVU522
		3928	2009 0026 15F0020F tst r5, #2
		3929	2010 002a 11D1 bne .L88
		3930	2011 .L85:
		3931	982:../libBME280/src/bme280.c **** }
		3932	2012 .loc 1 982 9 is_stmt 1 view .LVU523
		3933	982:../libBME280/src/bme280.c **** }
		3934	2013 .loc 1 982 16 is_stmt 0 view .LVU524
		3935	2014 002c 2346 mov r3, r4
		3936	2015 002e 0122 movs r2, #1
		3937	2016 0030 0DF10601 add r1, sp, #6
		3938	2017 0034 0DF10700 add r0, sp, #7
		3939	2018 0038 FFF7FEFF bl bme280_set_regs
		3940	2019 .LVL249:
		3941	2020 003c 0346 mov r3, r0
		3942	2021 .LVL250:
		3943	2022 .L83:
		3944	985:../libBME280/src/bme280.c **** }
		3945	2023 .loc 1 985 5 is_stmt 1 view .LVU525
		3946	986:../libBME280/src/bme280.c ****
		3947	2024 .loc 1 986 1 is_stmt 0 view .LVU526
		3948	2025 003e 1846 mov r0, r3
		3949	2026 0040 02B0 add sp, sp, #8
		3950	2027 .LCFI22:
		3951	2028 .cfi_remember_state
		3952	2029 .cfi_def_cfa_offset 16
		3953	2030 @ sp needed
		3954	2031 0042 70BD pop {r4, r5, r6, pc}
		3955	2032 .LVL251:
		3956	2033 .L87:
		3957	2034 .LCFI23:
		3958	2035 .cfi_restore_state
		3959	973:../libBME280/src/bme280.c **** }
		3960	2036 .loc 1 973 13 is_stmt 1 view .LVU527
		3961	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 67
		3962
		3963
		3964	2037 0044 3146 mov r1, r6
		3965	2038 0046 0DF10600 add r0, sp, #6
		3966	2039 .LVL252:
		3967	973:../libBME280/src/bme280.c **** }
		3968	2040 .loc 1 973 13 is_stmt 0 view .LVU528
		3969	2041 004a FFF7FEFF bl fill_osr_press_settings
		3970	2042 .LVL253:
		3971	2043 004e EAE7 b .L84
		3972	2044 .L88:
		3973	978:../libBME280/src/bme280.c **** }
		3974	2045 .loc 1 978 13 is_stmt 1 view .LVU529
		3975	2046 0050 3146 mov r1, r6
		3976	2047 0052 0DF10600 add r0, sp, #6
		3977	2048 0056 FFF7FEFF bl fill_osr_temp_settings
		3978	2049 .LVL254:
		3979	2050 005a E7E7 b .L85
		3980	2051 .cfi_endproc
		3981	2052 .LFE14:
		3982	2054 .section .text.set_osr_settings,"ax",%progbits
		3983	2055 .align 1
		3984	2056 .syntax unified
		3985	2057 .thumb
		3986	2058 .thumb_func
		3987	2059 .fpu softvfp
		3988	2061 set_osr_settings:
		3989	2062 .LVL255:
		3990	2063 .LFB12:
		3991	907:../libBME280/src/bme280.c **** int8_t rslt = BME280_W_INVALID_OSR_MACRO;
		3992	2064 .loc 1 907 1 view -0
		3993	2065 .cfi_startproc
		3994	2066 @ args = 0, pretend = 0, frame = 0
		3995	2067 @ frame_needed = 0, uses_anonymous_args = 0
		3996	907:../libBME280/src/bme280.c **** int8_t rslt = BME280_W_INVALID_OSR_MACRO;
		3997	2068 .loc 1 907 1 is_stmt 0 view .LVU531
		3998	2069 0000 70B5 push {r4, r5, r6, lr}
		3999	2070 .LCFI24:
		4000	2071 .cfi_def_cfa_offset 16
		4001	2072 .cfi_offset 4, -16
		4002	2073 .cfi_offset 5, -12
		4003	2074 .cfi_offset 6, -8
		4004	2075 .cfi_offset 14, -4
		4005	2076 0002 0446 mov r4, r0
		4006	2077 0004 0D46 mov r5, r1
		4007	2078 0006 1646 mov r6, r2
		4008	908:../libBME280/src/bme280.c ****
		4009	2079 .loc 1 908 5 is_stmt 1 view .LVU532
		4010	2080 .LVL256:
		4011	910:../libBME280/src/bme280.c **** {
		4012	2081 .loc 1 910 5 view .LVU533
		4013	910:../libBME280/src/bme280.c **** {
		4014	2082 .loc 1 910 8 is_stmt 0 view .LVU534
		4015	2083 0008 10F0040F tst r0, #4
		4016	2084 000c 04D1 bne .L94
		4017	908:../libBME280/src/bme280.c ****
		4018	2085 .loc 1 908 12 view .LVU535
		4019	2086 000e 0120 movs r0, #1
		4020	2087 .LVL257:
		4021	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 68
		4022
		4023
		4024	2088 .L90:
		4025	915:../libBME280/src/bme280.c **** {
		4026	2089 .loc 1 915 5 is_stmt 1 view .LVU536
		4027	915:../libBME280/src/bme280.c **** {
		4028	2090 .loc 1 915 8 is_stmt 0 view .LVU537
		4029	2091 0010 14F0030F tst r4, #3
		4030	2092 0014 05D1 bne .L95
		4031	2093 .L91:
		4032	920:../libBME280/src/bme280.c **** }
		4033	2094 .loc 1 920 5 is_stmt 1 view .LVU538
		4034	921:../libBME280/src/bme280.c ****
		4035	2095 .loc 1 921 1 is_stmt 0 view .LVU539
		4036	2096 0016 70BD pop {r4, r5, r6, pc}
		4037	2097 .LVL258:
		4038	2098 .L94:
		4039	912:../libBME280/src/bme280.c **** }
		4040	2099 .loc 1 912 9 is_stmt 1 view .LVU540
		4041	912:../libBME280/src/bme280.c **** }
		4042	2100 .loc 1 912 16 is_stmt 0 view .LVU541
		4043	2101 0018 1146 mov r1, r2
		4044	2102 .LVL259:
		4045	912:../libBME280/src/bme280.c **** }
		4046	2103 .loc 1 912 16 view .LVU542
		4047	2104 001a 2846 mov r0, r5
		4048	2105 .LVL260:
		4049	912:../libBME280/src/bme280.c **** }
		4050	2106 .loc 1 912 16 view .LVU543
		4051	2107 001c FFF7FEFF bl set_osr_humidity_settings
		4052	2108 .LVL261:
		4053	912:../libBME280/src/bme280.c **** }
		4054	2109 .loc 1 912 16 view .LVU544
		4055	2110 0020 F6E7 b .L90
		4056	2111 .L95:
		4057	917:../libBME280/src/bme280.c **** }
		4058	2112 .loc 1 917 9 is_stmt 1 view .LVU545
		4059	917:../libBME280/src/bme280.c **** }
		4060	2113 .loc 1 917 16 is_stmt 0 view .LVU546
		4061	2114 0022 3246 mov r2, r6
		4062	2115 0024 2946 mov r1, r5
		4063	2116 0026 2046 mov r0, r4
		4064	2117 .LVL262:
		4065	917:../libBME280/src/bme280.c **** }
		4066	2118 .loc 1 917 16 view .LVU547
		4067	2119 0028 FFF7FEFF bl set_osr_press_temp_settings
		4068	2120 .LVL263:
		4069	917:../libBME280/src/bme280.c **** }
		4070	2121 .loc 1 917 16 view .LVU548
		4071	2122 002c F3E7 b .L91
		4072	2123 .cfi_endproc
		4073	2124 .LFE12:
		4074	2126 .section .text.set_filter_standby_settings,"ax",%progbits
		4075	2127 .align 1
		4076	2128 .syntax unified
		4077	2129 .thumb
		4078	2130 .thumb_func
		4079	2131 .fpu softvfp
		4080	2133 set_filter_standby_settings:
		4081	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 69
		4082
		4083
		4084	2134 .LVL264:
		4085	2135 .LFB15:
		4086	995:../libBME280/src/bme280.c **** int8_t rslt;
		4087	2136 .loc 1 995 1 is_stmt 1 view -0
		4088	2137 .cfi_startproc
		4089	2138 @ args = 0, pretend = 0, frame = 8
		4090	2139 @ frame_needed = 0, uses_anonymous_args = 0
		4091	995:../libBME280/src/bme280.c **** int8_t rslt;
		4092	2140 .loc 1 995 1 is_stmt 0 view .LVU550
		4093	2141 0000 70B5 push {r4, r5, r6, lr}
		4094	2142 .LCFI25:
		4095	2143 .cfi_def_cfa_offset 16
		4096	2144 .cfi_offset 4, -16
		4097	2145 .cfi_offset 5, -12
		4098	2146 .cfi_offset 6, -8
		4099	2147 .cfi_offset 14, -4
		4100	2148 0002 82B0 sub sp, sp, #8
		4101	2149 .LCFI26:
		4102	2150 .cfi_def_cfa_offset 24
		4103	2151 0004 0546 mov r5, r0
		4104	2152 0006 0E46 mov r6, r1
		4105	2153 0008 1446 mov r4, r2
		4106	996:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_CONFIG_ADDR;
		4107	2154 .loc 1 996 5 is_stmt 1 view .LVU551
		4108	997:../libBME280/src/bme280.c **** uint8_t reg_data;
		4109	2155 .loc 1 997 5 view .LVU552
		4110	997:../libBME280/src/bme280.c **** uint8_t reg_data;
		4111	2156 .loc 1 997 13 is_stmt 0 view .LVU553
		4112	2157 000a F520 movs r0, #245
		4113	2158 .LVL265:
		4114	997:../libBME280/src/bme280.c **** uint8_t reg_data;
		4115	2159 .loc 1 997 13 view .LVU554
		4116	2160 000c 8DF80700 strb r0, [sp, #7]
		4117	998:../libBME280/src/bme280.c ****
		4118	2161 .loc 1 998 5 is_stmt 1 view .LVU555
		4119	1000:../libBME280/src/bme280.c ****
		4120	2162 .loc 1 1000 5 view .LVU556
		4121	1000:../libBME280/src/bme280.c ****
		4122	2163 .loc 1 1000 12 is_stmt 0 view .LVU557
		4123	2164 0010 1346 mov r3, r2
		4124	2165 0012 0122 movs r2, #1
		4125	2166 .LVL266:
		4126	1000:../libBME280/src/bme280.c ****
		4127	2167 .loc 1 1000 12 view .LVU558
		4128	2168 0014 0DF10601 add r1, sp, #6
		4129	2169 .LVL267:
		4130	1000:../libBME280/src/bme280.c ****
		4131	2170 .loc 1 1000 12 view .LVU559
		4132	2171 0018 FFF7FEFF bl bme280_get_regs
		4133	2172 .LVL268:
		4134	1002:../libBME280/src/bme280.c **** {
		4135	2173 .loc 1 1002 5 is_stmt 1 view .LVU560
		4136	1002:../libBME280/src/bme280.c **** {
		4137	2174 .loc 1 1002 8 is_stmt 0 view .LVU561
		4138	2175 001c 0346 mov r3, r0
		4139	2176 001e 70B9 cbnz r0, .L97
		4140	1004:../libBME280/src/bme280.c **** {
		4141	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 70
		4142
		4143
		4144	2177 .loc 1 1004 9 is_stmt 1 view .LVU562
		4145	1004:../libBME280/src/bme280.c **** {
		4146	2178 .loc 1 1004 12 is_stmt 0 view .LVU563
		4147	2179 0020 15F0080F tst r5, #8
		4148	2180 0024 0ED1 bne .L101
		4149	2181 .LVL269:
		4150	2182 .L98:
		4151	1009:../libBME280/src/bme280.c **** {
		4152	2183 .loc 1 1009 9 is_stmt 1 view .LVU564
		4153	1009:../libBME280/src/bme280.c **** {
		4154	2184 .loc 1 1009 12 is_stmt 0 view .LVU565
		4155	2185 0026 15F0100F tst r5, #16
		4156	2186 002a 11D1 bne .L102
		4157	2187 .L99:
		4158	1015:../libBME280/src/bme280.c **** }
		4159	2188 .loc 1 1015 9 is_stmt 1 view .LVU566
		4160	1015:../libBME280/src/bme280.c **** }
		4161	2189 .loc 1 1015 16 is_stmt 0 view .LVU567
		4162	2190 002c 2346 mov r3, r4
		4163	2191 002e 0122 movs r2, #1
		4164	2192 0030 0DF10601 add r1, sp, #6
		4165	2193 0034 0DF10700 add r0, sp, #7
		4166	2194 0038 FFF7FEFF bl bme280_set_regs
		4167	2195 .LVL270:
		4168	2196 003c 0346 mov r3, r0
		4169	2197 .LVL271:
		4170	2198 .L97:
		4171	1018:../libBME280/src/bme280.c **** }
		4172	2199 .loc 1 1018 5 is_stmt 1 view .LVU568
		4173	1019:../libBME280/src/bme280.c ****
		4174	2200 .loc 1 1019 1 is_stmt 0 view .LVU569
		4175	2201 003e 1846 mov r0, r3
		4176	2202 0040 02B0 add sp, sp, #8
		4177	2203 .LCFI27:
		4178	2204 .cfi_remember_state
		4179	2205 .cfi_def_cfa_offset 16
		4180	2206 @ sp needed
		4181	2207 0042 70BD pop {r4, r5, r6, pc}
		4182	2208 .LVL272:
		4183	2209 .L101:
		4184	2210 .LCFI28:
		4185	2211 .cfi_restore_state
		4186	1006:../libBME280/src/bme280.c **** }
		4187	2212 .loc 1 1006 13 is_stmt 1 view .LVU570
		4188	2213 0044 3146 mov r1, r6
		4189	2214 0046 0DF10600 add r0, sp, #6
		4190	2215 .LVL273:
		4191	1006:../libBME280/src/bme280.c **** }
		4192	2216 .loc 1 1006 13 is_stmt 0 view .LVU571
		4193	2217 004a FFF7FEFF bl fill_filter_settings
		4194	2218 .LVL274:
		4195	2219 004e EAE7 b .L98
		4196	2220 .L102:
		4197	1011:../libBME280/src/bme280.c **** }
		4198	2221 .loc 1 1011 13 is_stmt 1 view .LVU572
		4199	2222 0050 3146 mov r1, r6
		4200	2223 0052 0DF10600 add r0, sp, #6
		4201	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 71
		4202
		4203
		4204	2224 0056 FFF7FEFF bl fill_standby_settings
		4205	2225 .LVL275:
		4206	2226 005a E7E7 b .L99
		4207	2227 .cfi_endproc
		4208	2228 .LFE15:
		4209	2230 .section .text.reload_device_settings,"ax",%progbits
		4210	2231 .align 1
		4211	2232 .syntax unified
		4212	2233 .thumb
		4213	2234 .thumb_func
		4214	2235 .fpu softvfp
		4215	2237 reload_device_settings:
		4216	2238 .LVL276:
		4217	2239 .LFB23:
		4218	1127:../libBME280/src/bme280.c **** int8_t rslt;
		4219	2240 .loc 1 1127 1 view -0
		4220	2241 .cfi_startproc
		4221	2242 @ args = 0, pretend = 0, frame = 0
		4222	2243 @ frame_needed = 0, uses_anonymous_args = 0
		4223	1127:../libBME280/src/bme280.c **** int8_t rslt;
		4224	2244 .loc 1 1127 1 is_stmt 0 view .LVU574
		4225	2245 0000 38B5 push {r3, r4, r5, lr}
		4226	2246 .LCFI29:
		4227	2247 .cfi_def_cfa_offset 16
		4228	2248 .cfi_offset 3, -16
		4229	2249 .cfi_offset 4, -12
		4230	2250 .cfi_offset 5, -8
		4231	2251 .cfi_offset 14, -4
		4232	2252 0002 0446 mov r4, r0
		4233	2253 0004 0D46 mov r5, r1
		4234	1128:../libBME280/src/bme280.c ****
		4235	2254 .loc 1 1128 5 is_stmt 1 view .LVU575
		4236	1130:../libBME280/src/bme280.c ****
		4237	2255 .loc 1 1130 5 view .LVU576
		4238	1130:../libBME280/src/bme280.c ****
		4239	2256 .loc 1 1130 12 is_stmt 0 view .LVU577
		4240	2257 0006 0A46 mov r2, r1
		4241	2258 0008 0146 mov r1, r0
		4242	2259 .LVL277:
		4243	1130:../libBME280/src/bme280.c ****
		4244	2260 .loc 1 1130 12 view .LVU578
		4245	2261 000a 1F20 movs r0, #31
		4246	2262 .LVL278:
		4247	1130:../libBME280/src/bme280.c ****
		4248	2263 .loc 1 1130 12 view .LVU579
		4249	2264 000c FFF7FEFF bl set_osr_settings
		4250	2265 .LVL279:
		4251	1132:../libBME280/src/bme280.c **** {
		4252	2266 .loc 1 1132 5 is_stmt 1 view .LVU580
		4253	1132:../libBME280/src/bme280.c **** {
		4254	2267 .loc 1 1132 8 is_stmt 0 view .LVU581
		4255	2268 0010 0346 mov r3, r0
		4256	2269 0012 08B1 cbz r0, .L106
		4257	2270 .LVL280:
		4258	2271 .L104:
		4259	1137:../libBME280/src/bme280.c **** }
		4260	2272 .loc 1 1137 5 is_stmt 1 view .LVU582
		4261	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 72
		4262
		4263
		4264	1138:../libBME280/src/bme280.c ****
		4265	2273 .loc 1 1138 1 is_stmt 0 view .LVU583
		4266	2274 0014 1846 mov r0, r3
		4267	2275 0016 38BD pop {r3, r4, r5, pc}
		4268	2276 .LVL281:
		4269	2277 .L106:
		4270	1134:../libBME280/src/bme280.c **** }
		4271	2278 .loc 1 1134 9 is_stmt 1 view .LVU584
		4272	1134:../libBME280/src/bme280.c **** }
		4273	2279 .loc 1 1134 16 is_stmt 0 view .LVU585
		4274	2280 0018 2A46 mov r2, r5
		4275	2281 001a 2146 mov r1, r4
		4276	2282 001c 1F20 movs r0, #31
		4277	2283 .LVL282:
		4278	1134:../libBME280/src/bme280.c **** }
		4279	2284 .loc 1 1134 16 view .LVU586
		4280	2285 001e FFF7FEFF bl set_filter_standby_settings
		4281	2286 .LVL283:
		4282	2287 0022 0346 mov r3, r0
		4283	2288 .LVL284:
		4284	1134:../libBME280/src/bme280.c **** }
		4285	2289 .loc 1 1134 16 view .LVU587
		4286	2290 0024 F6E7 b .L104
		4287	2291 .cfi_endproc
		4288	2292 .LFE23:
		4289	2294 .section .text.write_power_mode,"ax",%progbits
		4290	2295 .align 1
		4291	2296 .syntax unified
		4292	2297 .thumb
		4293	2298 .thumb_func
		4294	2299 .fpu softvfp
		4295	2301 write_power_mode:
		4296	2302 .LVL285:
		4297	2303 .LFB21:
		4298	1075:../libBME280/src/bme280.c **** int8_t rslt;
		4299	2304 .loc 1 1075 1 is_stmt 1 view -0
		4300	2305 .cfi_startproc
		4301	2306 @ args = 0, pretend = 0, frame = 8
		4302	2307 @ frame_needed = 0, uses_anonymous_args = 0
		4303	1075:../libBME280/src/bme280.c **** int8_t rslt;
		4304	2308 .loc 1 1075 1 is_stmt 0 view .LVU589
		4305	2309 0000 30B5 push {r4, r5, lr}
		4306	2310 .LCFI30:
		4307	2311 .cfi_def_cfa_offset 12
		4308	2312 .cfi_offset 4, -12
		4309	2313 .cfi_offset 5, -8
		4310	2314 .cfi_offset 14, -4
		4311	2315 0002 83B0 sub sp, sp, #12
		4312	2316 .LCFI31:
		4313	2317 .cfi_def_cfa_offset 24
		4314	2318 0004 0546 mov r5, r0
		4315	2319 0006 0C46 mov r4, r1
		4316	1076:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_PWR_CTRL_ADDR;
		4317	2320 .loc 1 1076 5 is_stmt 1 view .LVU590
		4318	1077:../libBME280/src/bme280.c ****
		4319	2321 .loc 1 1077 5 view .LVU591
		4320	1077:../libBME280/src/bme280.c ****
		4321	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 73
		4322
		4323
		4324	2322 .loc 1 1077 13 is_stmt 0 view .LVU592
		4325	2323 0008 F420 movs r0, #244
		4326	2324 .LVL286:
		4327	1077:../libBME280/src/bme280.c ****
		4328	2325 .loc 1 1077 13 view .LVU593
		4329	2326 000a 8DF80700 strb r0, [sp, #7]
		4330	1080:../libBME280/src/bme280.c ****
		4331	2327 .loc 1 1080 5 is_stmt 1 view .LVU594
		4332	1083:../libBME280/src/bme280.c ****
		4333	2328 .loc 1 1083 5 view .LVU595
		4334	1083:../libBME280/src/bme280.c ****
		4335	2329 .loc 1 1083 12 is_stmt 0 view .LVU596
		4336	2330 000e 0B46 mov r3, r1
		4337	2331 0010 0122 movs r2, #1
		4338	2332 0012 0DF10601 add r1, sp, #6
		4339	2333 .LVL287:
		4340	1083:../libBME280/src/bme280.c ****
		4341	2334 .loc 1 1083 12 view .LVU597
		4342	2335 0016 FFF7FEFF bl bme280_get_regs
		4343	2336 .LVL288:
		4344	1086:../libBME280/src/bme280.c **** {
		4345	2337 .loc 1 1086 5 is_stmt 1 view .LVU598
		4346	1086:../libBME280/src/bme280.c **** {
		4347	2338 .loc 1 1086 8 is_stmt 0 view .LVU599
		4348	2339 001a 0346 mov r3, r0
		4349	2340 001c 10B1 cbz r0, .L110
		4350	2341 .LVL289:
		4351	2342 .L108:
		4352	1094:../libBME280/src/bme280.c **** }
		4353	2343 .loc 1 1094 5 is_stmt 1 view .LVU600
		4354	1095:../libBME280/src/bme280.c ****
		4355	2344 .loc 1 1095 1 is_stmt 0 view .LVU601
		4356	2345 001e 1846 mov r0, r3
		4357	2346 0020 03B0 add sp, sp, #12
		4358	2347 .LCFI32:
		4359	2348 .cfi_remember_state
		4360	2349 .cfi_def_cfa_offset 12
		4361	2350 @ sp needed
		4362	2351 0022 30BD pop {r4, r5, pc}
		4363	2352 .LVL290:
		4364	2353 .L110:
		4365	2354 .LCFI33:
		4366	2355 .cfi_restore_state
		4367	1088:../libBME280/src/bme280.c ****
		4368	2356 .loc 1 1088 9 is_stmt 1 view .LVU602
		4369	1088:../libBME280/src/bme280.c ****
		4370	2357 .loc 1 1088 31 is_stmt 0 view .LVU603
		4371	2358 0024 9DF80600 ldrb r0, [sp, #6] @ zero_extendqisi2
		4372	2359 .LVL291:
		4373	1088:../libBME280/src/bme280.c ****
		4374	2360 .loc 1 1088 31 view .LVU604
		4375	2361 0028 20F00300 bic r0, r0, #3
		4376	2362 002c 40B2 sxtb r0, r0
		4377	2363 002e 05F00305 and r5, r5, #3
		4378	2364 0032 2843 orrs r0, r0, r5
		4379	1088:../libBME280/src/bme280.c ****
		4380	2365 .loc 1 1088 29 view .LVU605
		4381	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 74
		4382
		4383
		4384	2366 0034 8DF80600 strb r0, [sp, #6]
		4385	1091:../libBME280/src/bme280.c **** }
		4386	2367 .loc 1 1091 9 is_stmt 1 view .LVU606
		4387	1091:../libBME280/src/bme280.c **** }
		4388	2368 .loc 1 1091 16 is_stmt 0 view .LVU607
		4389	2369 0038 2346 mov r3, r4
		4390	2370 003a 0122 movs r2, #1
		4391	2371 003c 0DF10601 add r1, sp, #6
		4392	2372 0040 0DF10700 add r0, sp, #7
		4393	2373 0044 FFF7FEFF bl bme280_set_regs
		4394	2374 .LVL292:
		4395	2375 0048 0346 mov r3, r0
		4396	2376 .LVL293:
		4397	1091:../libBME280/src/bme280.c **** }
		4398	2377 .loc 1 1091 16 view .LVU608
		4399	2378 004a E8E7 b .L108
		4400	2379 .cfi_endproc
		4401	2380 .LFE21:
		4402	2382 .section .text.bme280_get_sensor_settings,"ax",%progbits
		4403	2383 .align 1
		4404	2384 .global bme280_get_sensor_settings
		4405	2385 .syntax unified
		4406	2386 .thumb
		4407	2387 .thumb_func
		4408	2388 .fpu softvfp
		4409	2390 bme280_get_sensor_settings:
		4410	2391 .LVL294:
		4411	2392 .LFB4:
		4412	612:../libBME280/src/bme280.c **** int8_t rslt;
		4413	2393 .loc 1 612 1 is_stmt 1 view -0
		4414	2394 .cfi_startproc
		4415	2395 @ args = 0, pretend = 0, frame = 8
		4416	2396 @ frame_needed = 0, uses_anonymous_args = 0
		4417	612:../libBME280/src/bme280.c **** int8_t rslt;
		4418	2397 .loc 1 612 1 is_stmt 0 view .LVU610
		4419	2398 0000 30B5 push {r4, r5, lr}
		4420	2399 .LCFI34:
		4421	2400 .cfi_def_cfa_offset 12
		4422	2401 .cfi_offset 4, -12
		4423	2402 .cfi_offset 5, -8
		4424	2403 .cfi_offset 14, -4
		4425	2404 0002 83B0 sub sp, sp, #12
		4426	2405 .LCFI35:
		4427	2406 .cfi_def_cfa_offset 24
		4428	2407 0004 0546 mov r5, r0
		4429	613:../libBME280/src/bme280.c **** uint8_t reg_data[4];
		4430	2408 .loc 1 613 5 is_stmt 1 view .LVU611
		4431	614:../libBME280/src/bme280.c ****
		4432	2409 .loc 1 614 5 view .LVU612
		4433	617:../libBME280/src/bme280.c ****
		4434	2410 .loc 1 617 5 view .LVU613
		4435	617:../libBME280/src/bme280.c ****
		4436	2411 .loc 1 617 12 is_stmt 0 view .LVU614
		4437	2412 0006 FFF7FEFF bl null_ptr_check
		4438	2413 .LVL295:
		4439	620:../libBME280/src/bme280.c **** {
		4440	2414 .loc 1 620 5 is_stmt 1 view .LVU615
		4441	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 75
		4442
		4443
		4444	620:../libBME280/src/bme280.c **** {
		4445	2415 .loc 1 620 8 is_stmt 0 view .LVU616
		4446	2416 000a 0446 mov r4, r0
		4447	2417 000c 10B1 cbz r0, .L114
		4448	2418 .LVL296:
		4449	2419 .L112:
		4450	630:../libBME280/src/bme280.c **** }
		4451	2420 .loc 1 630 5 is_stmt 1 view .LVU617
		4452	631:../libBME280/src/bme280.c ****
		4453	2421 .loc 1 631 1 is_stmt 0 view .LVU618
		4454	2422 000e 2046 mov r0, r4
		4455	2423 0010 03B0 add sp, sp, #12
		4456	2424 .LCFI36:
		4457	2425 .cfi_remember_state
		4458	2426 .cfi_def_cfa_offset 12
		4459	2427 @ sp needed
		4460	2428 0012 30BD pop {r4, r5, pc}
		4461	2429 .LVL297:
		4462	2430 .L114:
		4463	2431 .LCFI37:
		4464	2432 .cfi_restore_state
		4465	622:../libBME280/src/bme280.c ****
		4466	2433 .loc 1 622 9 is_stmt 1 view .LVU619
		4467	622:../libBME280/src/bme280.c ****
		4468	2434 .loc 1 622 16 is_stmt 0 view .LVU620
		4469	2435 0014 2B46 mov r3, r5
		4470	2436 0016 0422 movs r2, #4
		4471	2437 0018 0DEB0201 add r1, sp, r2
		4472	2438 001c F220 movs r0, #242
		4473	2439 .LVL298:
		4474	622:../libBME280/src/bme280.c ****
		4475	2440 .loc 1 622 16 view .LVU621
		4476	2441 001e FFF7FEFF bl bme280_get_regs
		4477	2442 .LVL299:
		4478	624:../libBME280/src/bme280.c **** {
		4479	2443 .loc 1 624 9 is_stmt 1 view .LVU622
		4480	624:../libBME280/src/bme280.c **** {
		4481	2444 .loc 1 624 12 is_stmt 0 view .LVU623
		4482	2445 0022 0446 mov r4, r0
		4483	2446 0024 0028 cmp r0, #0
		4484	2447 0026 F2D1 bne .L112
		4485	626:../libBME280/src/bme280.c **** }
		4486	2448 .loc 1 626 13 is_stmt 1 view .LVU624
		4487	2449 0028 05F14001 add r1, r5, #64
		4488	2450 002c 01A8 add r0, sp, #4
		4489	2451 .LVL300:
		4490	626:../libBME280/src/bme280.c **** }
		4491	2452 .loc 1 626 13 is_stmt 0 view .LVU625
		4492	2453 002e FFF7FEFF bl parse_device_settings
		4493	2454 .LVL301:
		4494	2455 0032 ECE7 b .L112
		4495	2456 .cfi_endproc
		4496	2457 .LFE4:
		4497	2459 .section .text.bme280_get_sensor_mode,"ax",%progbits
		4498	2460 .align 1
		4499	2461 .global bme280_get_sensor_mode
		4500	2462 .syntax unified
		4501	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 76
		4502
		4503
		4504	2463 .thumb
		4505	2464 .thumb_func
		4506	2465 .fpu softvfp
		4507	2467 bme280_get_sensor_mode:
		4508	2468 .LVL302:
		4509	2469 .LFB6:
		4510	670:../libBME280/src/bme280.c **** int8_t rslt;
		4511	2470 .loc 1 670 1 is_stmt 1 view -0
		4512	2471 .cfi_startproc
		4513	2472 @ args = 0, pretend = 0, frame = 0
		4514	2473 @ frame_needed = 0, uses_anonymous_args = 0
		4515	670:../libBME280/src/bme280.c **** int8_t rslt;
		4516	2474 .loc 1 670 1 is_stmt 0 view .LVU627
		4517	2475 0000 38B5 push {r3, r4, r5, lr}
		4518	2476 .LCFI38:
		4519	2477 .cfi_def_cfa_offset 16
		4520	2478 .cfi_offset 3, -16
		4521	2479 .cfi_offset 4, -12
		4522	2480 .cfi_offset 5, -8
		4523	2481 .cfi_offset 14, -4
		4524	2482 0002 0446 mov r4, r0
		4525	2483 0004 0D46 mov r5, r1
		4526	671:../libBME280/src/bme280.c ****
		4527	2484 .loc 1 671 5 is_stmt 1 view .LVU628
		4528	674:../libBME280/src/bme280.c ****
		4529	2485 .loc 1 674 5 view .LVU629
		4530	674:../libBME280/src/bme280.c ****
		4531	2486 .loc 1 674 12 is_stmt 0 view .LVU630
		4532	2487 0006 0846 mov r0, r1
		4533	2488 .LVL303:
		4534	674:../libBME280/src/bme280.c ****
		4535	2489 .loc 1 674 12 view .LVU631
		4536	2490 0008 FFF7FEFF bl null_ptr_check
		4537	2491 .LVL304:
		4538	676:../libBME280/src/bme280.c **** {
		4539	2492 .loc 1 676 5 is_stmt 1 view .LVU632
		4540	676:../libBME280/src/bme280.c **** {
		4541	2493 .loc 1 676 8 is_stmt 0 view .LVU633
		4542	2494 000c 58B9 cbnz r0, .L117
		4543	676:../libBME280/src/bme280.c **** {
		4544	2495 .loc 1 676 29 discriminator 1 view .LVU634
		4545	2496 000e 6CB1 cbz r4, .L118
		4546	679:../libBME280/src/bme280.c ****
		4547	2497 .loc 1 679 9 is_stmt 1 view .LVU635
		4548	679:../libBME280/src/bme280.c ****
		4549	2498 .loc 1 679 16 is_stmt 0 view .LVU636
		4550	2499 0010 2B46 mov r3, r5
		4551	2500 0012 0122 movs r2, #1
		4552	2501 0014 2146 mov r1, r4
		4553	2502 0016 F420 movs r0, #244
		4554	2503 .LVL305:
		4555	679:../libBME280/src/bme280.c ****
		4556	2504 .loc 1 679 16 view .LVU637
		4557	2505 0018 FFF7FEFF bl bme280_get_regs
		4558	2506 .LVL306:
		4559	682:../libBME280/src/bme280.c **** }
		4560	2507 .loc 1 682 9 is_stmt 1 view .LVU638
		4561	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 77
		4562
		4563
		4564	682:../libBME280/src/bme280.c **** }
		4565	2508 .loc 1 682 24 is_stmt 0 view .LVU639
		4566	2509 001c 2378 ldrb r3, [r4] @ zero_extendqisi2
		4567	2510 001e 03F00303 and r3, r3, #3
		4568	682:../libBME280/src/bme280.c **** }
		4569	2511 .loc 1 682 22 view .LVU640
		4570	2512 0022 2370 strb r3, [r4]
		4571	2513 .LVL307:
		4572	2514 .L116:
		4573	689:../libBME280/src/bme280.c **** }
		4574	2515 .loc 1 689 5 is_stmt 1 view .LVU641
		4575	690:../libBME280/src/bme280.c ****
		4576	2516 .loc 1 690 1 is_stmt 0 view .LVU642
		4577	2517 0024 38BD pop {r3, r4, r5, pc}
		4578	2518 .LVL308:
		4579	2519 .L117:
		4580	686:../libBME280/src/bme280.c **** }
		4581	2520 .loc 1 686 14 view .LVU643
		4582	2521 0026 4FF0FF30 mov r0, #-1
		4583	2522 .LVL309:
		4584	686:../libBME280/src/bme280.c **** }
		4585	2523 .loc 1 686 14 view .LVU644
		4586	2524 002a FBE7 b .L116
		4587	2525 .LVL310:
		4588	2526 .L118:
		4589	686:../libBME280/src/bme280.c **** }
		4590	2527 .loc 1 686 14 view .LVU645
		4591	2528 002c 4FF0FF30 mov r0, #-1
		4592	2529 .LVL311:
		4593	686:../libBME280/src/bme280.c **** }
		4594	2530 .loc 1 686 14 view .LVU646
		4595	2531 0030 F8E7 b .L116
		4596	2532 .cfi_endproc
		4597	2533 .LFE6:
		4598	2535 .section .text.bme280_soft_reset,"ax",%progbits
		4599	2536 .align 1
		4600	2537 .global bme280_soft_reset
		4601	2538 .syntax unified
		4602	2539 .thumb
		4603	2540 .thumb_func
		4604	2541 .fpu softvfp
		4605	2543 bme280_soft_reset:
		4606	2544 .LVL312:
		4607	2545 .LFB7:
		4608	696:../libBME280/src/bme280.c **** int8_t rslt;
		4609	2546 .loc 1 696 1 is_stmt 1 view -0
		4610	2547 .cfi_startproc
		4611	2548 @ args = 0, pretend = 0, frame = 8
		4612	2549 @ frame_needed = 0, uses_anonymous_args = 0
		4613	696:../libBME280/src/bme280.c **** int8_t rslt;
		4614	2550 .loc 1 696 1 is_stmt 0 view .LVU648
		4615	2551 0000 30B5 push {r4, r5, lr}
		4616	2552 .LCFI39:
		4617	2553 .cfi_def_cfa_offset 12
		4618	2554 .cfi_offset 4, -12
		4619	2555 .cfi_offset 5, -8
		4620	2556 .cfi_offset 14, -4
		4621	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 78
		4622
		4623
		4624	2557 0002 83B0 sub sp, sp, #12
		4625	2558 .LCFI40:
		4626	2559 .cfi_def_cfa_offset 24
		4627	2560 0004 0446 mov r4, r0
		4628	697:../libBME280/src/bme280.c **** uint8_t reg_addr = BME280_RESET_ADDR;
		4629	2561 .loc 1 697 5 is_stmt 1 view .LVU649
		4630	698:../libBME280/src/bme280.c **** uint8_t status_reg = 0;
		4631	2562 .loc 1 698 5 view .LVU650
		4632	698:../libBME280/src/bme280.c **** uint8_t status_reg = 0;
		4633	2563 .loc 1 698 13 is_stmt 0 view .LVU651
		4634	2564 0006 E023 movs r3, #224
		4635	2565 0008 8DF80730 strb r3, [sp, #7]
		4636	699:../libBME280/src/bme280.c **** uint8_t try_run = 5;
		4637	2566 .loc 1 699 5 is_stmt 1 view .LVU652
		4638	699:../libBME280/src/bme280.c **** uint8_t try_run = 5;
		4639	2567 .loc 1 699 13 is_stmt 0 view .LVU653
		4640	2568 000c 0023 movs r3, #0
		4641	2569 000e 8DF80630 strb r3, [sp, #6]
		4642	700:../libBME280/src/bme280.c ****
		4643	2570 .loc 1 700 5 is_stmt 1 view .LVU654
		4644	2571 .LVL313:
		4645	703:../libBME280/src/bme280.c ****
		4646	2572 .loc 1 703 5 view .LVU655
		4647	703:../libBME280/src/bme280.c ****
		4648	2573 .loc 1 703 13 is_stmt 0 view .LVU656
		4649	2574 0012 B623 movs r3, #182
		4650	2575 0014 8DF80530 strb r3, [sp, #5]
		4651	706:../libBME280/src/bme280.c ****
		4652	2576 .loc 1 706 5 is_stmt 1 view .LVU657
		4653	706:../libBME280/src/bme280.c ****
		4654	2577 .loc 1 706 12 is_stmt 0 view .LVU658
		4655	2578 0018 FFF7FEFF bl null_ptr_check
		4656	2579 .LVL314:
		4657	709:../libBME280/src/bme280.c **** {
		4658	2580 .loc 1 709 5 is_stmt 1 view .LVU659
		4659	709:../libBME280/src/bme280.c **** {
		4660	2581 .loc 1 709 8 is_stmt 0 view .LVU660
		4661	2582 001c 0346 mov r3, r0
		4662	2583 001e 10B1 cbz r0, .L127
		4663	2584 .LVL315:
		4664	2585 .L121:
		4665	732:../libBME280/src/bme280.c **** }
		4666	2586 .loc 1 732 5 is_stmt 1 view .LVU661
		4667	733:../libBME280/src/bme280.c ****
		4668	2587 .loc 1 733 1 is_stmt 0 view .LVU662
		4669	2588 0020 1846 mov r0, r3
		4670	2589 0022 03B0 add sp, sp, #12
		4671	2590 .LCFI41:
		4672	2591 .cfi_remember_state
		4673	2592 .cfi_def_cfa_offset 12
		4674	2593 @ sp needed
		4675	2594 0024 30BD pop {r4, r5, pc}
		4676	2595 .LVL316:
		4677	2596 .L127:
		4678	2597 .LCFI42:
		4679	2598 .cfi_restore_state
		4680	712:../libBME280/src/bme280.c ****
		4681	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 79
		4682
		4683
		4684	2599 .loc 1 712 9 is_stmt 1 view .LVU663
		4685	712:../libBME280/src/bme280.c ****
		4686	2600 .loc 1 712 16 is_stmt 0 view .LVU664
		4687	2601 0026 2346 mov r3, r4
		4688	2602 0028 0122 movs r2, #1
		4689	2603 002a 0DF10501 add r1, sp, #5
		4690	2604 002e 0DF10700 add r0, sp, #7
		4691	2605 .LVL317:
		4692	712:../libBME280/src/bme280.c ****
		4693	2606 .loc 1 712 16 view .LVU665
		4694	2607 0032 FFF7FEFF bl bme280_set_regs
		4695	2608 .LVL318:
		4696	714:../libBME280/src/bme280.c **** {
		4697	2609 .loc 1 714 9 is_stmt 1 view .LVU666
		4698	714:../libBME280/src/bme280.c **** {
		4699	2610 .loc 1 714 12 is_stmt 0 view .LVU667
		4700	2611 0036 0346 mov r3, r0
		4701	2612 0038 0028 cmp r0, #0
		4702	2613 003a F1D1 bne .L121
		4703	700:../libBME280/src/bme280.c ****
		4704	2614 .loc 1 700 13 view .LVU668
		4705	2615 003c 0525 movs r5, #5
		4706	2616 003e 00E0 b .L123
		4707	2617 .LVL319:
		4708	2618 .L124:
		4709	723:../libBME280/src/bme280.c ****
		4710	2619 .loc 1 723 53 view .LVU669
		4711	2620 0040 1546 mov r5, r2
		4712	2621 .LVL320:
		4713	2622 .L123:
		4714	717:../libBME280/src/bme280.c **** {
		4715	2623 .loc 1 717 13 is_stmt 1 discriminator 3 view .LVU670
		4716	720:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_STATUS_REG_ADDR, &status_reg, 1, dev);
		4717	2624 .loc 1 720 17 discriminator 3 view .LVU671
		4718	720:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_STATUS_REG_ADDR, &status_reg, 1, dev);
		4719	2625 .loc 1 720 20 is_stmt 0 discriminator 3 view .LVU672
		4720	2626 0042 6369 ldr r3, [r4, #20]
		4721	720:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_STATUS_REG_ADDR, &status_reg, 1, dev);
		4722	2627 .loc 1 720 17 discriminator 3 view .LVU673
		4723	2628 0044 6168 ldr r1, [r4, #4]
		4724	2629 0046 4FF4FA60 mov r0, #2000
		4725	2630 .LVL321:
		4726	720:../libBME280/src/bme280.c **** rslt = bme280_get_regs(BME280_STATUS_REG_ADDR, &status_reg, 1, dev);
		4727	2631 .loc 1 720 17 discriminator 3 view .LVU674
		4728	2632 004a 9847 blx r3
		4729	2633 .LVL322:
		4730	721:../libBME280/src/bme280.c ****
		4731	2634 .loc 1 721 17 is_stmt 1 discriminator 3 view .LVU675
		4732	721:../libBME280/src/bme280.c ****
		4733	2635 .loc 1 721 24 is_stmt 0 discriminator 3 view .LVU676
		4734	2636 004c 2346 mov r3, r4
		4735	2637 004e 0122 movs r2, #1
		4736	2638 0050 0DF10601 add r1, sp, #6
		4737	2639 0054 F320 movs r0, #243
		4738	2640 0056 FFF7FEFF bl bme280_get_regs
		4739	2641 .LVL323:
		4740	723:../libBME280/src/bme280.c ****
		4741	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 80
		4742
		4743
		4744	2642 .loc 1 723 13 discriminator 3 view .LVU677
		4745	2643 005a 0346 mov r3, r0
		4746	2644 005c 38B9 cbnz r0, .L122
		4747	723:../libBME280/src/bme280.c ****
		4748	2645 .loc 1 723 53 discriminator 1 view .LVU678
		4749	2646 005e 6A1E subs r2, r5, #1
		4750	2647 0060 D2B2 uxtb r2, r2
		4751	2648 .LVL324:
		4752	723:../libBME280/src/bme280.c ****
		4753	2649 .loc 1 723 42 discriminator 1 view .LVU679
		4754	2650 0062 25B1 cbz r5, .L122
		4755	723:../libBME280/src/bme280.c ****
		4756	2651 .loc 1 723 72 discriminator 2 view .LVU680
		4757	2652 0064 9DF80610 ldrb r1, [sp, #6] @ zero_extendqisi2
		4758	723:../libBME280/src/bme280.c ****
		4759	2653 .loc 1 723 57 discriminator 2 view .LVU681
		4760	2654 0068 11F0010F tst r1, #1
		4761	2655 006c E8D1 bne .L124
		4762	2656 .LVL325:
		4763	2657 .L122:
		4764	725:../libBME280/src/bme280.c **** {
		4765	2658 .loc 1 725 13 is_stmt 1 view .LVU682
		4766	725:../libBME280/src/bme280.c **** {
		4767	2659 .loc 1 725 28 is_stmt 0 view .LVU683
		4768	2660 006e 9DF80620 ldrb r2, [sp, #6] @ zero_extendqisi2
		4769	725:../libBME280/src/bme280.c **** {
		4770	2661 .loc 1 725 16 view .LVU684
		4771	2662 0072 12F0010F tst r2, #1
		4772	2663 0076 D3D0 beq .L121
		4773	727:../libBME280/src/bme280.c **** }
		4774	2664 .loc 1 727 22 view .LVU685
		4775	2665 0078 6FF00503 mvn r3, #5
		4776	2666 007c D0E7 b .L121
		4777	2667 .cfi_endproc
		4778	2668 .LFE7:
		4779	2670 .section .text.bme280_init,"ax",%progbits
		4780	2671 .align 1
		4781	2672 .global bme280_init
		4782	2673 .syntax unified
		4783	2674 .thumb
		4784	2675 .thumb_func
		4785	2676 .fpu softvfp
		4786	2678 bme280_init:
		4787	2679 .LVL326:
		4788	2680 .LFB0:
		4789	405:../libBME280/src/bme280.c **** int8_t rslt;
		4790	2681 .loc 1 405 1 is_stmt 1 view -0
		4791	2682 .cfi_startproc
		4792	2683 @ args = 0, pretend = 0, frame = 8
		4793	2684 @ frame_needed = 0, uses_anonymous_args = 0
		4794	405:../libBME280/src/bme280.c **** int8_t rslt;
		4795	2685 .loc 1 405 1 is_stmt 0 view .LVU687
		4796	2686 0000 70B5 push {r4, r5, r6, lr}
		4797	2687 .LCFI43:
		4798	2688 .cfi_def_cfa_offset 16
		4799	2689 .cfi_offset 4, -16
		4800	2690 .cfi_offset 5, -12
		4801	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 81
		4802
		4803
		4804	2691 .cfi_offset 6, -8
		4805	2692 .cfi_offset 14, -4
		4806	2693 0002 82B0 sub sp, sp, #8
		4807	2694 .LCFI44:
		4808	2695 .cfi_def_cfa_offset 24
		4809	2696 0004 0546 mov r5, r0
		4810	406:../libBME280/src/bme280.c ****
		4811	2697 .loc 1 406 5 is_stmt 1 view .LVU688
		4812	409:../libBME280/src/bme280.c **** uint8_t chip_id = 0;
		4813	2698 .loc 1 409 5 view .LVU689
		4814	2699 .LVL327:
		4815	410:../libBME280/src/bme280.c ****
		4816	2700 .loc 1 410 5 view .LVU690
		4817	410:../libBME280/src/bme280.c ****
		4818	2701 .loc 1 410 13 is_stmt 0 view .LVU691
		4819	2702 0006 0023 movs r3, #0
		4820	2703 0008 8DF80730 strb r3, [sp, #7]
		4821	413:../libBME280/src/bme280.c ****
		4822	2704 .loc 1 413 5 is_stmt 1 view .LVU692
		4823	413:../libBME280/src/bme280.c ****
		4824	2705 .loc 1 413 12 is_stmt 0 view .LVU693
		4825	2706 000c FFF7FEFF bl null_ptr_check
		4826	2707 .LVL328:
		4827	416:../libBME280/src/bme280.c **** {
		4828	2708 .loc 1 416 5 is_stmt 1 view .LVU694
		4829	416:../libBME280/src/bme280.c **** {
		4830	2709 .loc 1 416 8 is_stmt 0 view .LVU695
		4831	2710 0010 0646 mov r6, r0
		4832	2711 0012 48B3 cbz r0, .L134
		4833	2712 .LVL329:
		4834	2713 .L130:
		4835	452:../libBME280/src/bme280.c **** }
		4836	2714 .loc 1 452 5 is_stmt 1 view .LVU696
		4837	453:../libBME280/src/bme280.c ****
		4838	2715 .loc 1 453 1 is_stmt 0 view .LVU697
		4839	2716 0014 3046 mov r0, r6
		4840	2717 0016 02B0 add sp, sp, #8
		4841	2718 .LCFI45:
		4842	2719 .cfi_remember_state
		4843	2720 .cfi_def_cfa_offset 16
		4844	2721 @ sp needed
		4845	2722 0018 70BD pop {r4, r5, r6, pc}
		4846	2723 .LVL330:
		4847	2724 .L137:
		4848	2725 .LCFI46:
		4849	2726 .cfi_restore_state
		4850	434:../libBME280/src/bme280.c **** }
		4851	2727 .loc 1 434 21 is_stmt 1 view .LVU698
		4852	434:../libBME280/src/bme280.c **** }
		4853	2728 .loc 1 434 28 is_stmt 0 view .LVU699
		4854	2729 001a 2846 mov r0, r5
		4855	2730 .LVL331:
		4856	434:../libBME280/src/bme280.c **** }
		4857	2731 .loc 1 434 28 view .LVU700
		4858	2732 001c FFF7FEFF bl get_calib_data
		4859	2733 .LVL332:
		4860	2734 0020 0646 mov r6, r0
		4861	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 82
		4862
		4863
		4864	2735 .LVL333:
		4865	434:../libBME280/src/bme280.c **** }
		4866	2736 .loc 1 434 28 view .LVU701
		4867	2737 0022 1CE0 b .L132
		4868	2738 .LVL334:
		4869	2739 .L131:
		4870	441:../libBME280/src/bme280.c **** --try_count;
		4871	2740 .loc 1 441 13 is_stmt 1 view .LVU702
		4872	441:../libBME280/src/bme280.c **** --try_count;
		4873	2741 .loc 1 441 16 is_stmt 0 view .LVU703
		4874	2742 0024 6B69 ldr r3, [r5, #20]
		4875	441:../libBME280/src/bme280.c **** --try_count;
		4876	2743 .loc 1 441 13 view .LVU704
		4877	2744 0026 6968 ldr r1, [r5, #4]
		4878	2745 0028 4FF47A70 mov r0, #1000
		4879	2746 .LVL335:
		4880	441:../libBME280/src/bme280.c **** --try_count;
		4881	2747 .loc 1 441 13 view .LVU705
		4882	2748 002c 9847 blx r3
		4883	2749 .LVL336:
		4884	442:../libBME280/src/bme280.c **** }
		4885	2750 .loc 1 442 13 is_stmt 1 view .LVU706
		4886	2751 002e 013C subs r4, r4, #1
		4887	2752 .LVL337:
		4888	442:../libBME280/src/bme280.c **** }
		4889	2753 .loc 1 442 13 is_stmt 0 view .LVU707
		4890	2754 0030 E4B2 uxtb r4, r4
		4891	2755 .LVL338:
		4892	2756 .L129:
		4893	418:../libBME280/src/bme280.c **** {
		4894	2757 .loc 1 418 15 view .LVU708
		4895	2758 0032 A4B1 cbz r4, .L132
		4896	421:../libBME280/src/bme280.c ****
		4897	2759 .loc 1 421 13 is_stmt 1 view .LVU709
		4898	421:../libBME280/src/bme280.c ****
		4899	2760 .loc 1 421 20 is_stmt 0 view .LVU710
		4900	2761 0034 2B46 mov r3, r5
		4901	2762 0036 0122 movs r2, #1
		4902	2763 0038 0DF10701 add r1, sp, #7
		4903	2764 003c D020 movs r0, #208
		4904	2765 003e FFF7FEFF bl bme280_get_regs
		4905	2766 .LVL339:
		4906	424:../libBME280/src/bme280.c **** {
		4907	2767 .loc 1 424 13 is_stmt 1 view .LVU711
		4908	424:../libBME280/src/bme280.c **** {
		4909	2768 .loc 1 424 16 is_stmt 0 view .LVU712
		4910	2769 0042 0646 mov r6, r0
		4911	2770 0044 0028 cmp r0, #0
		4912	2771 0046 EDD1 bne .L131
		4913	424:../libBME280/src/bme280.c **** {
		4914	2772 .loc 1 424 49 discriminator 1 view .LVU713
		4915	2773 0048 9DF80730 ldrb r3, [sp, #7] @ zero_extendqisi2
		4916	424:../libBME280/src/bme280.c **** {
		4917	2774 .loc 1 424 37 discriminator 1 view .LVU714
		4918	2775 004c 602B cmp r3, #96
		4919	2776 004e E9D1 bne .L131
		4920	426:../libBME280/src/bme280.c ****
		4921	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 83
		4922
		4923
		4924	2777 .loc 1 426 17 is_stmt 1 view .LVU715
		4925	426:../libBME280/src/bme280.c ****
		4926	2778 .loc 1 426 30 is_stmt 0 view .LVU716
		4927	2779 0050 2B70 strb r3, [r5]
		4928	429:../libBME280/src/bme280.c ****
		4929	2780 .loc 1 429 17 is_stmt 1 view .LVU717
		4930	429:../libBME280/src/bme280.c ****
		4931	2781 .loc 1 429 24 is_stmt 0 view .LVU718
		4932	2782 0052 2846 mov r0, r5
		4933	2783 .LVL340:
		4934	429:../libBME280/src/bme280.c ****
		4935	2784 .loc 1 429 24 view .LVU719
		4936	2785 0054 FFF7FEFF bl bme280_soft_reset
		4937	2786 .LVL341:
		4938	431:../libBME280/src/bme280.c **** {
		4939	2787 .loc 1 431 17 is_stmt 1 view .LVU720
		4940	431:../libBME280/src/bme280.c **** {
		4941	2788 .loc 1 431 20 is_stmt 0 view .LVU721
		4942	2789 0058 0646 mov r6, r0
		4943	2790 005a 0028 cmp r0, #0
		4944	2791 005c DDD0 beq .L137
		4945	2792 .LVL342:
		4946	2793 .L132:
		4947	446:../libBME280/src/bme280.c **** {
		4948	2794 .loc 1 446 9 is_stmt 1 view .LVU722
		4949	446:../libBME280/src/bme280.c **** {
		4950	2795 .loc 1 446 12 is_stmt 0 view .LVU723
		4951	2796 005e 002C cmp r4, #0
		4952	2797 0060 D8D1 bne .L130
		4953	448:../libBME280/src/bme280.c **** }
		4954	2798 .loc 1 448 18 view .LVU724
		4955	2799 0062 6FF00106 mvn r6, #1
		4956	2800 .LVL343:
		4957	448:../libBME280/src/bme280.c **** }
		4958	2801 .loc 1 448 18 view .LVU725
		4959	2802 0066 D5E7 b .L130
		4960	2803 .LVL344:
		4961	2804 .L134:
		4962	409:../libBME280/src/bme280.c **** uint8_t chip_id = 0;
		4963	2805 .loc 1 409 13 view .LVU726
		4964	2806 0068 0524 movs r4, #5
		4965	2807 006a E2E7 b .L129
		4966	2808 .cfi_endproc
		4967	2809 .LFE0:
		4968	2811 .section .text.put_device_to_sleep,"ax",%progbits
		4969	2812 .align 1
		4970	2813 .syntax unified
		4971	2814 .thumb
		4972	2815 .thumb_func
		4973	2816 .fpu softvfp
		4974	2818 put_device_to_sleep:
		4975	2819 .LVL345:
		4976	2820 .LFB22:
		4977	1101:../libBME280/src/bme280.c **** int8_t rslt;
		4978	2821 .loc 1 1101 1 is_stmt 1 view -0
		4979	2822 .cfi_startproc
		4980	2823 @ args = 0, pretend = 0, frame = 16
		4981	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 84
		4982
		4983
		4984	2824 @ frame_needed = 0, uses_anonymous_args = 0
		4985	1101:../libBME280/src/bme280.c **** int8_t rslt;
		4986	2825 .loc 1 1101 1 is_stmt 0 view .LVU728
		4987	2826 0000 10B5 push {r4, lr}
		4988	2827 .LCFI47:
		4989	2828 .cfi_def_cfa_offset 8
		4990	2829 .cfi_offset 4, -8
		4991	2830 .cfi_offset 14, -4
		4992	2831 0002 84B0 sub sp, sp, #16
		4993	2832 .LCFI48:
		4994	2833 .cfi_def_cfa_offset 24
		4995	2834 0004 0446 mov r4, r0
		4996	1102:../libBME280/src/bme280.c **** uint8_t reg_data[4];
		4997	2835 .loc 1 1102 5 is_stmt 1 view .LVU729
		4998	1103:../libBME280/src/bme280.c **** struct bme280_settings settings;
		4999	2836 .loc 1 1103 5 view .LVU730
		5000	1104:../libBME280/src/bme280.c ****
		5001	2837 .loc 1 1104 5 view .LVU731
		5002	1106:../libBME280/src/bme280.c ****
		5003	2838 .loc 1 1106 5 view .LVU732
		5004	1106:../libBME280/src/bme280.c ****
		5005	2839 .loc 1 1106 12 is_stmt 0 view .LVU733
		5006	2840 0006 0346 mov r3, r0
		5007	2841 0008 0422 movs r2, #4
		5008	2842 000a 03A9 add r1, sp, #12
		5009	2843 000c F220 movs r0, #242
		5010	2844 .LVL346:
		5011	1106:../libBME280/src/bme280.c ****
		5012	2845 .loc 1 1106 12 view .LVU734
		5013	2846 000e FFF7FEFF bl bme280_get_regs
		5014	2847 .LVL347:
		5015	1108:../libBME280/src/bme280.c **** {
		5016	2848 .loc 1 1108 5 is_stmt 1 view .LVU735
		5017	1108:../libBME280/src/bme280.c **** {
		5018	2849 .loc 1 1108 8 is_stmt 0 view .LVU736
		5019	2850 0012 0346 mov r3, r0
		5020	2851 0014 10B1 cbz r0, .L141
		5021	2852 .LVL348:
		5022	2853 .L139:
		5023	1119:../libBME280/src/bme280.c **** }
		5024	2854 .loc 1 1119 5 is_stmt 1 view .LVU737
		5025	1120:../libBME280/src/bme280.c ****
		5026	2855 .loc 1 1120 1 is_stmt 0 view .LVU738
		5027	2856 0016 1846 mov r0, r3
		5028	2857 0018 04B0 add sp, sp, #16
		5029	2858 .LCFI49:
		5030	2859 .cfi_remember_state
		5031	2860 .cfi_def_cfa_offset 8
		5032	2861 @ sp needed
		5033	2862 001a 10BD pop {r4, pc}
		5034	2863 .LVL349:
		5035	2864 .L141:
		5036	2865 .LCFI50:
		5037	2866 .cfi_restore_state
		5038	1110:../libBME280/src/bme280.c **** rslt = bme280_soft_reset(dev);
		5039	2867 .loc 1 1110 9 is_stmt 1 view .LVU739
		5040	2868 001c 01A9 add r1, sp, #4
		5041	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 85
		5042
		5043
		5044	2869 001e 03A8 add r0, sp, #12
		5045	2870 .LVL350:
		5046	1110:../libBME280/src/bme280.c **** rslt = bme280_soft_reset(dev);
		5047	2871 .loc 1 1110 9 is_stmt 0 view .LVU740
		5048	2872 0020 FFF7FEFF bl parse_device_settings
		5049	2873 .LVL351:
		5050	1111:../libBME280/src/bme280.c ****
		5051	2874 .loc 1 1111 9 is_stmt 1 view .LVU741
		5052	1111:../libBME280/src/bme280.c ****
		5053	2875 .loc 1 1111 16 is_stmt 0 view .LVU742
		5054	2876 0024 2046 mov r0, r4
		5055	2877 0026 FFF7FEFF bl bme280_soft_reset
		5056	2878 .LVL352:
		5057	1113:../libBME280/src/bme280.c **** {
		5058	2879 .loc 1 1113 9 is_stmt 1 view .LVU743
		5059	1113:../libBME280/src/bme280.c **** {
		5060	2880 .loc 1 1113 12 is_stmt 0 view .LVU744
		5061	2881 002a 0346 mov r3, r0
		5062	2882 002c 0028 cmp r0, #0
		5063	2883 002e F2D1 bne .L139
		5064	1115:../libBME280/src/bme280.c **** }
		5065	2884 .loc 1 1115 13 is_stmt 1 view .LVU745
		5066	1115:../libBME280/src/bme280.c **** }
		5067	2885 .loc 1 1115 20 is_stmt 0 view .LVU746
		5068	2886 0030 2146 mov r1, r4
		5069	2887 0032 01A8 add r0, sp, #4
		5070	2888 .LVL353:
		5071	1115:../libBME280/src/bme280.c **** }
		5072	2889 .loc 1 1115 20 view .LVU747
		5073	2890 0034 FFF7FEFF bl reload_device_settings
		5074	2891 .LVL354:
		5075	2892 0038 0346 mov r3, r0
		5076	2893 .LVL355:
		5077	1115:../libBME280/src/bme280.c **** }
		5078	2894 .loc 1 1115 20 view .LVU748
		5079	2895 003a ECE7 b .L139
		5080	2896 .cfi_endproc
		5081	2897 .LFE22:
		5082	2899 .section .text.bme280_set_sensor_settings,"ax",%progbits
		5083	2900 .align 1
		5084	2901 .global bme280_set_sensor_settings
		5085	2902 .syntax unified
		5086	2903 .thumb
		5087	2904 .thumb_func
		5088	2905 .fpu softvfp
		5089	2907 bme280_set_sensor_settings:
		5090	2908 .LVL356:
		5091	2909 .LFB3:
		5092	567:../libBME280/src/bme280.c **** int8_t rslt;
		5093	2910 .loc 1 567 1 is_stmt 1 view -0
		5094	2911 .cfi_startproc
		5095	2912 @ args = 0, pretend = 0, frame = 8
		5096	2913 @ frame_needed = 0, uses_anonymous_args = 0
		5097	567:../libBME280/src/bme280.c **** int8_t rslt;
		5098	2914 .loc 1 567 1 is_stmt 0 view .LVU750
		5099	2915 0000 70B5 push {r4, r5, r6, lr}
		5100	2916 .LCFI51:
		5101	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 86
		5102
		5103
		5104	2917 .cfi_def_cfa_offset 16
		5105	2918 .cfi_offset 4, -16
		5106	2919 .cfi_offset 5, -12
		5107	2920 .cfi_offset 6, -8
		5108	2921 .cfi_offset 14, -4
		5109	2922 0002 82B0 sub sp, sp, #8
		5110	2923 .LCFI52:
		5111	2924 .cfi_def_cfa_offset 24
		5112	2925 0004 0646 mov r6, r0
		5113	2926 0006 0D46 mov r5, r1
		5114	568:../libBME280/src/bme280.c **** uint8_t sensor_mode;
		5115	2927 .loc 1 568 5 is_stmt 1 view .LVU751
		5116	569:../libBME280/src/bme280.c ****
		5117	2928 .loc 1 569 5 view .LVU752
		5118	572:../libBME280/src/bme280.c ****
		5119	2929 .loc 1 572 5 view .LVU753
		5120	572:../libBME280/src/bme280.c ****
		5121	2930 .loc 1 572 12 is_stmt 0 view .LVU754
		5122	2931 0008 0846 mov r0, r1
		5123	2932 .LVL357:
		5124	572:../libBME280/src/bme280.c ****
		5125	2933 .loc 1 572 12 view .LVU755
		5126	2934 000a FFF7FEFF bl null_ptr_check
		5127	2935 .LVL358:
		5128	575:../libBME280/src/bme280.c **** {
		5129	2936 .loc 1 575 5 is_stmt 1 view .LVU756
		5130	575:../libBME280/src/bme280.c **** {
		5131	2937 .loc 1 575 8 is_stmt 0 view .LVU757
		5132	2938 000e 0446 mov r4, r0
		5133	2939 0010 10B1 cbz r0, .L147
		5134	2940 .LVL359:
		5135	2941 .L143:
		5136	604:../libBME280/src/bme280.c **** }
		5137	2942 .loc 1 604 5 is_stmt 1 view .LVU758
		5138	605:../libBME280/src/bme280.c ****
		5139	2943 .loc 1 605 1 is_stmt 0 view .LVU759
		5140	2944 0012 2046 mov r0, r4
		5141	2945 0014 02B0 add sp, sp, #8
		5142	2946 .LCFI53:
		5143	2947 .cfi_remember_state
		5144	2948 .cfi_def_cfa_offset 16
		5145	2949 @ sp needed
		5146	2950 0016 70BD pop {r4, r5, r6, pc}
		5147	2951 .LVL360:
		5148	2952 .L147:
		5149	2953 .LCFI54:
		5150	2954 .cfi_restore_state
		5151	577:../libBME280/src/bme280.c ****
		5152	2955 .loc 1 577 9 is_stmt 1 view .LVU760
		5153	577:../libBME280/src/bme280.c ****
		5154	2956 .loc 1 577 16 is_stmt 0 view .LVU761
		5155	2957 0018 2946 mov r1, r5
		5156	2958 001a 0DF10700 add r0, sp, #7
		5157	2959 .LVL361:
		5158	577:../libBME280/src/bme280.c ****
		5159	2960 .loc 1 577 16 view .LVU762
		5160	2961 001e FFF7FEFF bl bme280_get_sensor_mode
		5161	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 87
		5162
		5163
		5164	2962 .LVL362:
		5165	579:../libBME280/src/bme280.c **** {
		5166	2963 .loc 1 579 9 is_stmt 1 view .LVU763
		5167	579:../libBME280/src/bme280.c **** {
		5168	2964 .loc 1 579 12 is_stmt 0 view .LVU764
		5169	2965 0022 0446 mov r4, r0
		5170	2966 0024 10B9 cbnz r0, .L144
		5171	579:../libBME280/src/bme280.c **** {
		5172	2967 .loc 1 579 49 discriminator 1 view .LVU765
		5173	2968 0026 9DF80730 ldrb r3, [sp, #7] @ zero_extendqisi2
		5174	579:../libBME280/src/bme280.c **** {
		5175	2969 .loc 1 579 33 discriminator 1 view .LVU766
		5176	2970 002a B3B9 cbnz r3, .L148
		5177	2971 .LVL363:
		5178	2972 .L144:
		5179	584:../libBME280/src/bme280.c **** {
		5180	2973 .loc 1 584 9 is_stmt 1 view .LVU767
		5181	584:../libBME280/src/bme280.c **** {
		5182	2974 .loc 1 584 12 is_stmt 0 view .LVU768
		5183	2975 002c 002C cmp r4, #0
		5184	2976 002e F0D1 bne .L143
		5185	589:../libBME280/src/bme280.c **** {
		5186	2977 .loc 1 589 13 is_stmt 1 view .LVU769
		5187	589:../libBME280/src/bme280.c **** {
		5188	2978 .loc 1 589 17 is_stmt 0 view .LVU770
		5189	2979 0030 3146 mov r1, r6
		5190	2980 0032 0720 movs r0, #7
		5191	2981 0034 FFF7FEFF bl are_settings_changed
		5192	2982 .LVL364:
		5193	589:../libBME280/src/bme280.c **** {
		5194	2983 .loc 1 589 16 view .LVU771
		5195	2984 0038 A0B9 cbnz r0, .L149
		5196	2985 .L145:
		5197	597:../libBME280/src/bme280.c **** {
		5198	2986 .loc 1 597 13 is_stmt 1 view .LVU772
		5199	597:../libBME280/src/bme280.c **** {
		5200	2987 .loc 1 597 16 is_stmt 0 view .LVU773
		5201	2988 003a 002C cmp r4, #0
		5202	2989 003c E9D1 bne .L143
		5203	597:../libBME280/src/bme280.c **** {
		5204	2990 .loc 1 597 40 discriminator 1 view .LVU774
		5205	2991 003e 3146 mov r1, r6
		5206	2992 0040 1820 movs r0, #24
		5207	2993 0042 FFF7FEFF bl are_settings_changed
		5208	2994 .LVL365:
		5209	597:../libBME280/src/bme280.c **** {
		5210	2995 .loc 1 597 37 discriminator 1 view .LVU775
		5211	2996 0046 0028 cmp r0, #0
		5212	2997 0048 E3D0 beq .L143
		5213	599:../libBME280/src/bme280.c **** }
		5214	2998 .loc 1 599 17 is_stmt 1 view .LVU776
		5215	599:../libBME280/src/bme280.c **** }
		5216	2999 .loc 1 599 24 is_stmt 0 view .LVU777
		5217	3000 004a 2A46 mov r2, r5
		5218	3001 004c 05F14001 add r1, r5, #64
		5219	3002 0050 3046 mov r0, r6
		5220	3003 0052 FFF7FEFF bl set_filter_standby_settings
		5221	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 88
		5222
		5223
		5224	3004 .LVL366:
		5225	3005 0056 0446 mov r4, r0
		5226	3006 .LVL367:
		5227	599:../libBME280/src/bme280.c **** }
		5228	3007 .loc 1 599 24 view .LVU778
		5229	3008 0058 DBE7 b .L143
		5230	3009 .LVL368:
		5231	3010 .L148:
		5232	581:../libBME280/src/bme280.c **** }
		5233	3011 .loc 1 581 13 is_stmt 1 view .LVU779
		5234	581:../libBME280/src/bme280.c **** }
		5235	3012 .loc 1 581 20 is_stmt 0 view .LVU780
		5236	3013 005a 2846 mov r0, r5
		5237	3014 .LVL369:
		5238	581:../libBME280/src/bme280.c **** }
		5239	3015 .loc 1 581 20 view .LVU781
		5240	3016 005c FFF7FEFF bl put_device_to_sleep
		5241	3017 .LVL370:
		5242	3018 0060 0446 mov r4, r0
		5243	3019 .LVL371:
		5244	581:../libBME280/src/bme280.c **** }
		5245	3020 .loc 1 581 20 view .LVU782
		5246	3021 0062 E3E7 b .L144
		5247	3022 .L149:
		5248	591:../libBME280/src/bme280.c **** }
		5249	3023 .loc 1 591 17 is_stmt 1 view .LVU783
		5250	591:../libBME280/src/bme280.c **** }
		5251	3024 .loc 1 591 24 is_stmt 0 view .LVU784
		5252	3025 0064 2A46 mov r2, r5
		5253	3026 0066 05F14001 add r1, r5, #64
		5254	3027 006a 3046 mov r0, r6
		5255	3028 006c FFF7FEFF bl set_osr_settings
		5256	3029 .LVL372:
		5257	3030 0070 0446 mov r4, r0
		5258	3031 .LVL373:
		5259	591:../libBME280/src/bme280.c **** }
		5260	3032 .loc 1 591 24 view .LVU785
		5261	3033 0072 E2E7 b .L145
		5262	3034 .cfi_endproc
		5263	3035 .LFE3:
		5264	3037 .section .text.bme280_set_sensor_mode,"ax",%progbits
		5265	3038 .align 1
		5266	3039 .global bme280_set_sensor_mode
		5267	3040 .syntax unified
		5268	3041 .thumb
		5269	3042 .thumb_func
		5270	3043 .fpu softvfp
		5271	3045 bme280_set_sensor_mode:
		5272	3046 .LVL374:
		5273	3047 .LFB5:
		5274	637:../libBME280/src/bme280.c **** int8_t rslt;
		5275	3048 .loc 1 637 1 is_stmt 1 view -0
		5276	3049 .cfi_startproc
		5277	3050 @ args = 0, pretend = 0, frame = 8
		5278	3051 @ frame_needed = 0, uses_anonymous_args = 0
		5279	637:../libBME280/src/bme280.c **** int8_t rslt;
		5280	3052 .loc 1 637 1 is_stmt 0 view .LVU787
		5281	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 89
		5282
		5283
		5284	3053 0000 30B5 push {r4, r5, lr}
		5285	3054 .LCFI55:
		5286	3055 .cfi_def_cfa_offset 12
		5287	3056 .cfi_offset 4, -12
		5288	3057 .cfi_offset 5, -8
		5289	3058 .cfi_offset 14, -4
		5290	3059 0002 83B0 sub sp, sp, #12
		5291	3060 .LCFI56:
		5292	3061 .cfi_def_cfa_offset 24
		5293	3062 0004 0546 mov r5, r0
		5294	3063 0006 0C46 mov r4, r1
		5295	638:../libBME280/src/bme280.c **** uint8_t last_set_mode;
		5296	3064 .loc 1 638 5 is_stmt 1 view .LVU788
		5297	639:../libBME280/src/bme280.c ****
		5298	3065 .loc 1 639 5 view .LVU789
		5299	642:../libBME280/src/bme280.c ****
		5300	3066 .loc 1 642 5 view .LVU790
		5301	642:../libBME280/src/bme280.c ****
		5302	3067 .loc 1 642 12 is_stmt 0 view .LVU791
		5303	3068 0008 0846 mov r0, r1
		5304	3069 .LVL375:
		5305	642:../libBME280/src/bme280.c ****
		5306	3070 .loc 1 642 12 view .LVU792
		5307	3071 000a FFF7FEFF bl null_ptr_check
		5308	3072 .LVL376:
		5309	644:../libBME280/src/bme280.c **** {
		5310	3073 .loc 1 644 5 is_stmt 1 view .LVU793
		5311	644:../libBME280/src/bme280.c **** {
		5312	3074 .loc 1 644 8 is_stmt 0 view .LVU794
		5313	3075 000e 0346 mov r3, r0
		5314	3076 0010 10B1 cbz r0, .L154
		5315	3077 .LVL377:
		5316	3078 .L151:
		5317	663:../libBME280/src/bme280.c **** }
		5318	3079 .loc 1 663 5 is_stmt 1 view .LVU795
		5319	664:../libBME280/src/bme280.c ****
		5320	3080 .loc 1 664 1 is_stmt 0 view .LVU796
		5321	3081 0012 1846 mov r0, r3
		5322	3082 0014 03B0 add sp, sp, #12
		5323	3083 .LCFI57:
		5324	3084 .cfi_remember_state
		5325	3085 .cfi_def_cfa_offset 12
		5326	3086 @ sp needed
		5327	3087 0016 30BD pop {r4, r5, pc}
		5328	3088 .LVL378:
		5329	3089 .L154:
		5330	3090 .LCFI58:
		5331	3091 .cfi_restore_state
		5332	646:../libBME280/src/bme280.c ****
		5333	3092 .loc 1 646 9 is_stmt 1 view .LVU797
		5334	646:../libBME280/src/bme280.c ****
		5335	3093 .loc 1 646 16 is_stmt 0 view .LVU798
		5336	3094 0018 2146 mov r1, r4
		5337	3095 001a 0DF10700 add r0, sp, #7
		5338	3096 .LVL379:
		5339	646:../libBME280/src/bme280.c ****
		5340	3097 .loc 1 646 16 view .LVU799
		5341	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 90
		5342
		5343
		5344	3098 001e FFF7FEFF bl bme280_get_sensor_mode
		5345	3099 .LVL380:
		5346	651:../libBME280/src/bme280.c **** {
		5347	3100 .loc 1 651 9 is_stmt 1 view .LVU800
		5348	651:../libBME280/src/bme280.c **** {
		5349	3101 .loc 1 651 12 is_stmt 0 view .LVU801
		5350	3102 0022 0346 mov r3, r0
		5351	3103 0024 10B9 cbnz r0, .L152
		5352	651:../libBME280/src/bme280.c **** {
		5353	3104 .loc 1 651 51 discriminator 1 view .LVU802
		5354	3105 0026 9DF80720 ldrb r2, [sp, #7] @ zero_extendqisi2
		5355	651:../libBME280/src/bme280.c **** {
		5356	3106 .loc 1 651 33 discriminator 1 view .LVU803
		5357	3107 002a 3AB9 cbnz r2, .L155
		5358	3108 .LVL381:
		5359	3109 .L152:
		5360	657:../libBME280/src/bme280.c **** {
		5361	3110 .loc 1 657 9 is_stmt 1 view .LVU804
		5362	657:../libBME280/src/bme280.c **** {
		5363	3111 .loc 1 657 12 is_stmt 0 view .LVU805
		5364	3112 002c 002B cmp r3, #0
		5365	3113 002e F0D1 bne .L151
		5366	659:../libBME280/src/bme280.c **** }
		5367	3114 .loc 1 659 13 is_stmt 1 view .LVU806
		5368	659:../libBME280/src/bme280.c **** }
		5369	3115 .loc 1 659 20 is_stmt 0 view .LVU807
		5370	3116 0030 2146 mov r1, r4
		5371	3117 0032 2846 mov r0, r5
		5372	3118 0034 FFF7FEFF bl write_power_mode
		5373	3119 .LVL382:
		5374	659:../libBME280/src/bme280.c **** }
		5375	3120 .loc 1 659 20 view .LVU808
		5376	3121 0038 0346 mov r3, r0
		5377	3122 .LVL383:
		5378	659:../libBME280/src/bme280.c **** }
		5379	3123 .loc 1 659 20 view .LVU809
		5380	3124 003a EAE7 b .L151
		5381	3125 .LVL384:
		5382	3126 .L155:
		5383	653:../libBME280/src/bme280.c **** }
		5384	3127 .loc 1 653 13 is_stmt 1 view .LVU810
		5385	653:../libBME280/src/bme280.c **** }
		5386	3128 .loc 1 653 20 is_stmt 0 view .LVU811
		5387	3129 003c 2046 mov r0, r4
		5388	3130 .LVL385:
		5389	653:../libBME280/src/bme280.c **** }
		5390	3131 .loc 1 653 20 view .LVU812
		5391	3132 003e FFF7FEFF bl put_device_to_sleep
		5392	3133 .LVL386:
		5393	3134 0042 0346 mov r3, r0
		5394	3135 .LVL387:
		5395	653:../libBME280/src/bme280.c **** }
		5396	3136 .loc 1 653 20 view .LVU813
		5397	3137 0044 F2E7 b .L152
		5398	3138 .cfi_endproc
		5399	3139 .LFE5:
		5400	3141 .section .text.bme280_parse_sensor_data,"ax",%progbits
		5401	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 91
		5402
		5403
		5404	3142 .align 1
		5405	3143 .global bme280_parse_sensor_data
		5406	3144 .syntax unified
		5407	3145 .thumb
		5408	3146 .thumb_func
		5409	3147 .fpu softvfp
		5410	3149 bme280_parse_sensor_data:
		5411	3150 .LVL388:
		5412	3151 .LFB9:
		5413	782:../libBME280/src/bme280.c **** /* Variables to store the sensor data */
		5414	3152 .loc 1 782 1 is_stmt 1 view -0
		5415	3153 .cfi_startproc
		5416	3154 @ args = 0, pretend = 0, frame = 0
		5417	3155 @ frame_needed = 0, uses_anonymous_args = 0
		5418	3156 @ link register save eliminated.
		5419	782:../libBME280/src/bme280.c **** /* Variables to store the sensor data */
		5420	3157 .loc 1 782 1 is_stmt 0 view .LVU815
		5421	3158 0000 10B4 push {r4}
		5422	3159 .LCFI59:
		5423	3160 .cfi_def_cfa_offset 4
		5424	3161 .cfi_offset 4, -4
		5425	784:../libBME280/src/bme280.c **** uint32_t data_lsb;
		5426	3162 .loc 1 784 5 is_stmt 1 view .LVU816
		5427	785:../libBME280/src/bme280.c **** uint32_t data_msb;
		5428	3163 .loc 1 785 5 view .LVU817
		5429	786:../libBME280/src/bme280.c ****
		5430	3164 .loc 1 786 5 view .LVU818
		5431	789:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[1] << 4;
		5432	3165 .loc 1 789 5 view .LVU819
		5433	789:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[1] << 4;
		5434	3166 .loc 1 789 34 is_stmt 0 view .LVU820
		5435	3167 0002 0478 ldrb r4, [r0] @ zero_extendqisi2
		5436	3168 .LVL389:
		5437	790:../libBME280/src/bme280.c **** data_xlsb = (uint32_t)reg_data[2] >> 4;
		5438	3169 .loc 1 790 5 is_stmt 1 view .LVU821
		5439	790:../libBME280/src/bme280.c **** data_xlsb = (uint32_t)reg_data[2] >> 4;
		5440	3170 .loc 1 790 34 is_stmt 0 view .LVU822
		5441	3171 0004 4378 ldrb r3, [r0, #1] @ zero_extendqisi2
		5442	790:../libBME280/src/bme280.c **** data_xlsb = (uint32_t)reg_data[2] >> 4;
		5443	3172 .loc 1 790 14 view .LVU823
		5444	3173 0006 1B01 lsls r3, r3, #4
		5445	3174 .LVL390:
		5446	791:../libBME280/src/bme280.c **** uncomp_data->pressure = data_msb \| data_lsb \| data_xlsb;
		5447	3175 .loc 1 791 5 is_stmt 1 view .LVU824
		5448	791:../libBME280/src/bme280.c **** uncomp_data->pressure = data_msb \| data_lsb \| data_xlsb;
		5449	3176 .loc 1 791 35 is_stmt 0 view .LVU825
		5450	3177 0008 8278 ldrb r2, [r0, #2] @ zero_extendqisi2
		5451	3178 .LVL391:
		5452	792:../libBME280/src/bme280.c ****
		5453	3179 .loc 1 792 5 is_stmt 1 view .LVU826
		5454	792:../libBME280/src/bme280.c ****
		5455	3180 .loc 1 792 38 is_stmt 0 view .LVU827
		5456	3181 000a 43EA0433 orr r3, r3, r4, lsl #12
		5457	3182 .LVL392:
		5458	792:../libBME280/src/bme280.c ****
		5459	3183 .loc 1 792 49 view .LVU828
		5460	3184 000e 43EA1213 orr r3, r3, r2, lsr #4
		5461	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 92
		5462
		5463
		5464	792:../libBME280/src/bme280.c ****
		5465	3185 .loc 1 792 27 view .LVU829
		5466	3186 0012 0B60 str r3, [r1]
		5467	3187 .LVL393:
		5468	795:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[4] << 4;
		5469	3188 .loc 1 795 5 is_stmt 1 view .LVU830
		5470	795:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[4] << 4;
		5471	3189 .loc 1 795 34 is_stmt 0 view .LVU831
		5472	3190 0014 C478 ldrb r4, [r0, #3] @ zero_extendqisi2
		5473	3191 .LVL394:
		5474	796:../libBME280/src/bme280.c **** data_xlsb = (uint32_t)reg_data[5] >> 4;
		5475	3192 .loc 1 796 5 is_stmt 1 view .LVU832
		5476	796:../libBME280/src/bme280.c **** data_xlsb = (uint32_t)reg_data[5] >> 4;
		5477	3193 .loc 1 796 34 is_stmt 0 view .LVU833
		5478	3194 0016 0379 ldrb r3, [r0, #4] @ zero_extendqisi2
		5479	796:../libBME280/src/bme280.c **** data_xlsb = (uint32_t)reg_data[5] >> 4;
		5480	3195 .loc 1 796 14 view .LVU834
		5481	3196 0018 1B01 lsls r3, r3, #4
		5482	3197 .LVL395:
		5483	797:../libBME280/src/bme280.c **** uncomp_data->temperature = data_msb \| data_lsb \| data_xlsb;
		5484	3198 .loc 1 797 5 is_stmt 1 view .LVU835
		5485	797:../libBME280/src/bme280.c **** uncomp_data->temperature = data_msb \| data_lsb \| data_xlsb;
		5486	3199 .loc 1 797 35 is_stmt 0 view .LVU836
		5487	3200 001a 4279 ldrb r2, [r0, #5] @ zero_extendqisi2
		5488	3201 .LVL396:
		5489	798:../libBME280/src/bme280.c ****
		5490	3202 .loc 1 798 5 is_stmt 1 view .LVU837
		5491	798:../libBME280/src/bme280.c ****
		5492	3203 .loc 1 798 41 is_stmt 0 view .LVU838
		5493	3204 001c 43EA0433 orr r3, r3, r4, lsl #12
		5494	3205 .LVL397:
		5495	798:../libBME280/src/bme280.c ****
		5496	3206 .loc 1 798 52 view .LVU839
		5497	3207 0020 43EA1213 orr r3, r3, r2, lsr #4
		5498	798:../libBME280/src/bme280.c ****
		5499	3208 .loc 1 798 30 view .LVU840
		5500	3209 0024 4B60 str r3, [r1, #4]
		5501	3210 .LVL398:
		5502	801:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[7];
		5503	3211 .loc 1 801 5 is_stmt 1 view .LVU841
		5504	801:../libBME280/src/bme280.c **** data_lsb = (uint32_t)reg_data[7];
		5505	3212 .loc 1 801 34 is_stmt 0 view .LVU842
		5506	3213 0026 8279 ldrb r2, [r0, #6] @ zero_extendqisi2
		5507	3214 .LVL399:
		5508	802:../libBME280/src/bme280.c **** uncomp_data->humidity = data_msb \| data_lsb;
		5509	3215 .loc 1 802 5 is_stmt 1 view .LVU843
		5510	802:../libBME280/src/bme280.c **** uncomp_data->humidity = data_msb \| data_lsb;
		5511	3216 .loc 1 802 34 is_stmt 0 view .LVU844
		5512	3217 0028 C379 ldrb r3, [r0, #7] @ zero_extendqisi2
		5513	3218 .LVL400:
		5514	803:../libBME280/src/bme280.c **** }
		5515	3219 .loc 1 803 5 is_stmt 1 view .LVU845
		5516	803:../libBME280/src/bme280.c **** }
		5517	3220 .loc 1 803 38 is_stmt 0 view .LVU846
		5518	3221 002a 43EA0223 orr r3, r3, r2, lsl #8
		5519	3222 .LVL401:
		5520	803:../libBME280/src/bme280.c **** }
		5521	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 93
		5522
		5523
		5524	3223 .loc 1 803 27 view .LVU847
		5525	3224 002e 8B60 str r3, [r1, #8]
		5526	3225 .LVL402:
		5527	804:../libBME280/src/bme280.c ****
		5528	3226 .loc 1 804 1 view .LVU848
		5529	3227 0030 10BC pop {r4}
		5530	3228 .LCFI60:
		5531	3229 .cfi_restore 4
		5532	3230 .cfi_def_cfa_offset 0
		5533	3231 0032 7047 bx lr
		5534	3232 .cfi_endproc
		5535	3233 .LFE9:
		5536	3235 .section .text.bme280_compensate_data,"ax",%progbits
		5537	3236 .align 1
		5538	3237 .global bme280_compensate_data
		5539	3238 .syntax unified
		5540	3239 .thumb
		5541	3240 .thumb_func
		5542	3241 .fpu softvfp
		5543	3243 bme280_compensate_data:
		5544	3244 .LVL403:
		5545	3245 .LFB10:
		5546	815:../libBME280/src/bme280.c **** int8_t rslt = BME280_OK;
		5547	3246 .loc 1 815 1 is_stmt 1 view -0
		5548	3247 .cfi_startproc
		5549	3248 @ args = 0, pretend = 0, frame = 0
		5550	3249 @ frame_needed = 0, uses_anonymous_args = 0
		5551	816:../libBME280/src/bme280.c ****
		5552	3250 .loc 1 816 5 view .LVU850
		5553	818:../libBME280/src/bme280.c **** {
		5554	3251 .loc 1 818 5 view .LVU851
		5555	818:../libBME280/src/bme280.c **** {
		5556	3252 .loc 1 818 8 is_stmt 0 view .LVU852
		5557	3253 0000 61B3 cbz r1, .L162
		5558	815:../libBME280/src/bme280.c **** int8_t rslt = BME280_OK;
		5559	3254 .loc 1 815 1 discriminator 1 view .LVU853
		5560	3255 0002 F8B5 push {r3, r4, r5, r6, r7, lr}
		5561	3256 .LCFI61:
		5562	3257 .cfi_def_cfa_offset 24
		5563	3258 .cfi_offset 3, -24
		5564	3259 .cfi_offset 4, -20
		5565	3260 .cfi_offset 5, -16
		5566	3261 .cfi_offset 6, -12
		5567	3262 .cfi_offset 7, -8
		5568	3263 .cfi_offset 14, -4
		5569	3264 0004 0F46 mov r7, r1
		5570	818:../libBME280/src/bme280.c **** {
		5571	3265 .loc 1 818 31 discriminator 1 view .LVU854
		5572	3266 0006 62B3 cbz r2, .L163
		5573	818:../libBME280/src/bme280.c **** {
		5574	3267 .loc 1 818 54 discriminator 2 view .LVU855
		5575	3268 0008 73B3 cbz r3, .L164
		5576	3269 000a 1E46 mov r6, r3
		5577	3270 000c 1446 mov r4, r2
		5578	3271 000e 0546 mov r5, r0
		5579	821:../libBME280/src/bme280.c **** comp_data->pressure = 0;
		5580	3272 .loc 1 821 9 is_stmt 1 view .LVU856
		5581	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 94
		5582
		5583
		5584	821:../libBME280/src/bme280.c **** comp_data->pressure = 0;
		5585	3273 .loc 1 821 32 is_stmt 0 view .LVU857
		5586	3274 0010 0022 movs r2, #0
		5587	3275 .LVL404:
		5588	821:../libBME280/src/bme280.c **** comp_data->pressure = 0;
		5589	3276 .loc 1 821 32 view .LVU858
		5590	3277 0012 0023 movs r3, #0
		5591	3278 .LVL405:
		5592	821:../libBME280/src/bme280.c **** comp_data->pressure = 0;
		5593	3279 .loc 1 821 32 view .LVU859
		5594	3280 0014 C4E90223 strd r2, [r4, #8]
		5595	822:../libBME280/src/bme280.c **** comp_data->humidity = 0;
		5596	3281 .loc 1 822 9 is_stmt 1 view .LVU860
		5597	822:../libBME280/src/bme280.c **** comp_data->humidity = 0;
		5598	3282 .loc 1 822 29 is_stmt 0 view .LVU861
		5599	3283 0018 C4E90023 strd r2, [r4]
		5600	823:../libBME280/src/bme280.c ****
		5601	3284 .loc 1 823 9 is_stmt 1 view .LVU862
		5602	823:../libBME280/src/bme280.c ****
		5603	3285 .loc 1 823 29 is_stmt 0 view .LVU863
		5604	3286 001c C4E90423 strd r2, [r4, #16]
		5605	826:../libBME280/src/bme280.c **** {
		5606	3287 .loc 1 826 9 is_stmt 1 view .LVU864
		5607	826:../libBME280/src/bme280.c **** {
		5608	3288 .loc 1 826 12 is_stmt 0 view .LVU865
		5609	3289 0020 10F0070F tst r0, #7
		5610	3290 0024 13D1 bne .L170
		5611	3291 .LVL406:
		5612	3292 .L160:
		5613	832:../libBME280/src/bme280.c **** {
		5614	3293 .loc 1 832 9 is_stmt 1 view .LVU866
		5615	832:../libBME280/src/bme280.c **** {
		5616	3294 .loc 1 832 12 is_stmt 0 view .LVU867
		5617	3295 0026 15F0010F tst r5, #1
		5618	3296 002a 05D0 beq .L161
		5619	835:../libBME280/src/bme280.c **** }
		5620	3297 .loc 1 835 13 is_stmt 1 view .LVU868
		5621	835:../libBME280/src/bme280.c **** }
		5622	3298 .loc 1 835 35 is_stmt 0 view .LVU869
		5623	3299 002c 3146 mov r1, r6
		5624	3300 002e 3846 mov r0, r7
		5625	3301 0030 FFF7FEFF bl compensate_pressure
		5626	3302 .LVL407:
		5627	835:../libBME280/src/bme280.c **** }
		5628	3303 .loc 1 835 33 view .LVU870
		5629	3304 0034 C4E90001 strd r0, [r4]
		5630	3305 .L161:
		5631	838:../libBME280/src/bme280.c **** {
		5632	3306 .loc 1 838 9 is_stmt 1 view .LVU871
		5633	838:../libBME280/src/bme280.c **** {
		5634	3307 .loc 1 838 12 is_stmt 0 view .LVU872
		5635	3308 0038 15F0040F tst r5, #4
		5636	3309 003c 17D0 beq .L165
		5637	841:../libBME280/src/bme280.c **** }
		5638	3310 .loc 1 841 13 is_stmt 1 view .LVU873
		5639	841:../libBME280/src/bme280.c **** }
		5640	3311 .loc 1 841 35 is_stmt 0 view .LVU874
		5641	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 95
		5642
		5643
		5644	3312 003e 3146 mov r1, r6
		5645	3313 0040 3846 mov r0, r7
		5646	3314 0042 FFF7FEFF bl compensate_humidity
		5647	3315 .LVL408:
		5648	841:../libBME280/src/bme280.c **** }
		5649	3316 .loc 1 841 33 view .LVU875
		5650	3317 0046 C4E90401 strd r0, [r4, #16]
		5651	816:../libBME280/src/bme280.c ****
		5652	3318 .loc 1 816 12 view .LVU876
		5653	3319 004a 0020 movs r0, #0
		5654	3320 .LVL409:
		5655	3321 .L159:
		5656	849:../libBME280/src/bme280.c **** }
		5657	3322 .loc 1 849 5 is_stmt 1 view .LVU877
		5658	850:../libBME280/src/bme280.c ****
		5659	3323 .loc 1 850 1 is_stmt 0 view .LVU878
		5660	3324 004c F8BD pop {r3, r4, r5, r6, r7, pc}
		5661	3325 .LVL410:
		5662	3326 .L170:
		5663	829:../libBME280/src/bme280.c **** }
		5664	3327 .loc 1 829 13 is_stmt 1 view .LVU879
		5665	829:../libBME280/src/bme280.c **** }
		5666	3328 .loc 1 829 38 is_stmt 0 view .LVU880
		5667	3329 004e 3146 mov r1, r6
		5668	3330 .LVL411:
		5669	829:../libBME280/src/bme280.c **** }
		5670	3331 .loc 1 829 38 view .LVU881
		5671	3332 0050 3846 mov r0, r7
		5672	3333 .LVL412:
		5673	829:../libBME280/src/bme280.c **** }
		5674	3334 .loc 1 829 38 view .LVU882
		5675	3335 0052 FFF7FEFF bl compensate_temperature
		5676	3336 .LVL413:
		5677	829:../libBME280/src/bme280.c **** }
		5678	3337 .loc 1 829 36 view .LVU883
		5679	3338 0056 C4E90201 strd r0, [r4, #8]
		5680	3339 005a E4E7 b .L160
		5681	3340 .LVL414:
		5682	3341 .L162:
		5683	3342 .LCFI62:
		5684	3343 .cfi_def_cfa_offset 0
		5685	3344 .cfi_restore 3
		5686	3345 .cfi_restore 4
		5687	3346 .cfi_restore 5
		5688	3347 .cfi_restore 6
		5689	3348 .cfi_restore 7
		5690	3349 .cfi_restore 14
		5691	846:../libBME280/src/bme280.c **** }
		5692	3350 .loc 1 846 14 view .LVU884
		5693	3351 005c 4FF0FF30 mov r0, #-1
		5694	3352 .LVL415:
		5695	849:../libBME280/src/bme280.c **** }
		5696	3353 .loc 1 849 5 is_stmt 1 view .LVU885
		5697	850:../libBME280/src/bme280.c ****
		5698	3354 .loc 1 850 1 is_stmt 0 view .LVU886
		5699	3355 0060 7047 bx lr
		5700	3356 .LVL416:
		5701	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 96
		5702
		5703
		5704	3357 .L163:
		5705	3358 .LCFI63:
		5706	3359 .cfi_def_cfa_offset 24
		5707	3360 .cfi_offset 3, -24
		5708	3361 .cfi_offset 4, -20
		5709	3362 .cfi_offset 5, -16
		5710	3363 .cfi_offset 6, -12
		5711	3364 .cfi_offset 7, -8
		5712	3365 .cfi_offset 14, -4
		5713	846:../libBME280/src/bme280.c **** }
		5714	3366 .loc 1 846 14 view .LVU887
		5715	3367 0062 4FF0FF30 mov r0, #-1
		5716	3368 .LVL417:
		5717	846:../libBME280/src/bme280.c **** }
		5718	3369 .loc 1 846 14 view .LVU888
		5719	3370 0066 F1E7 b .L159
		5720	3371 .LVL418:
		5721	3372 .L164:
		5722	846:../libBME280/src/bme280.c **** }
		5723	3373 .loc 1 846 14 view .LVU889
		5724	3374 0068 4FF0FF30 mov r0, #-1
		5725	3375 .LVL419:
		5726	846:../libBME280/src/bme280.c **** }
		5727	3376 .loc 1 846 14 view .LVU890
		5728	3377 006c EEE7 b .L159
		5729	3378 .LVL420:
		5730	3379 .L165:
		5731	816:../libBME280/src/bme280.c ****
		5732	3380 .loc 1 816 12 view .LVU891
		5733	3381 006e 0020 movs r0, #0
		5734	3382 0070 ECE7 b .L159
		5735	3383 .cfi_endproc
		5736	3384 .LFE10:
		5737	3386 .section .text.bme280_get_sensor_data,"ax",%progbits
		5738	3387 .align 1
		5739	3388 .global bme280_get_sensor_data
		5740	3389 .syntax unified
		5741	3390 .thumb
		5742	3391 .thumb_func
		5743	3392 .fpu softvfp
		5744	3394 bme280_get_sensor_data:
		5745	3395 .LVL421:
		5746	3396 .LFB8:
		5747	741:../libBME280/src/bme280.c **** int8_t rslt;
		5748	3397 .loc 1 741 1 is_stmt 1 view -0
		5749	3398 .cfi_startproc
		5750	3399 @ args = 0, pretend = 0, frame = 24
		5751	3400 @ frame_needed = 0, uses_anonymous_args = 0
		5752	741:../libBME280/src/bme280.c **** int8_t rslt;
		5753	3401 .loc 1 741 1 is_stmt 0 view .LVU893
		5754	3402 0000 70B5 push {r4, r5, r6, lr}
		5755	3403 .LCFI64:
		5756	3404 .cfi_def_cfa_offset 16
		5757	3405 .cfi_offset 4, -16
		5758	3406 .cfi_offset 5, -12
		5759	3407 .cfi_offset 6, -8
		5760	3408 .cfi_offset 14, -4
		5761	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 97
		5762
		5763
		5764	3409 0002 86B0 sub sp, sp, #24
		5765	3410 .LCFI65:
		5766	3411 .cfi_def_cfa_offset 40
		5767	3412 0004 0646 mov r6, r0
		5768	3413 0006 0D46 mov r5, r1
		5769	3414 0008 1446 mov r4, r2
		5770	742:../libBME280/src/bme280.c ****
		5771	3415 .loc 1 742 5 is_stmt 1 view .LVU894
		5772	747:../libBME280/src/bme280.c **** struct bme280_uncomp_data uncomp_data = { 0 };
		5773	3416 .loc 1 747 5 view .LVU895
		5774	747:../libBME280/src/bme280.c **** struct bme280_uncomp_data uncomp_data = { 0 };
		5775	3417 .loc 1 747 13 is_stmt 0 view .LVU896
		5776	3418 000a 0023 movs r3, #0
		5777	3419 000c 0493 str r3, [sp, #16]
		5778	3420 000e 0593 str r3, [sp, #20]
		5779	748:../libBME280/src/bme280.c ****
		5780	3421 .loc 1 748 5 is_stmt 1 view .LVU897
		5781	748:../libBME280/src/bme280.c ****
		5782	3422 .loc 1 748 31 is_stmt 0 view .LVU898
		5783	3423 0010 0193 str r3, [sp, #4]
		5784	3424 0012 0293 str r3, [sp, #8]
		5785	3425 0014 0393 str r3, [sp, #12]
		5786	751:../libBME280/src/bme280.c ****
		5787	3426 .loc 1 751 5 is_stmt 1 view .LVU899
		5788	751:../libBME280/src/bme280.c ****
		5789	3427 .loc 1 751 12 is_stmt 0 view .LVU900
		5790	3428 0016 1046 mov r0, r2
		5791	3429 .LVL422:
		5792	751:../libBME280/src/bme280.c ****
		5793	3430 .loc 1 751 12 view .LVU901
		5794	3431 0018 FFF7FEFF bl null_ptr_check
		5795	3432 .LVL423:
		5796	753:../libBME280/src/bme280.c **** {
		5797	3433 .loc 1 753 5 is_stmt 1 view .LVU902
		5798	753:../libBME280/src/bme280.c **** {
		5799	3434 .loc 1 753 8 is_stmt 0 view .LVU903
		5800	3435 001c C0B9 cbnz r0, .L173
		5801	753:../libBME280/src/bme280.c **** {
		5802	3436 .loc 1 753 29 discriminator 1 view .LVU904
		5803	3437 001e D5B1 cbz r5, .L174
		5804	756:../libBME280/src/bme280.c ****
		5805	3438 .loc 1 756 9 is_stmt 1 view .LVU905
		5806	756:../libBME280/src/bme280.c ****
		5807	3439 .loc 1 756 16 is_stmt 0 view .LVU906
		5808	3440 0020 2346 mov r3, r4
		5809	3441 0022 0822 movs r2, #8
		5810	3442 0024 04A9 add r1, sp, #16
		5811	3443 0026 F720 movs r0, #247
		5812	3444 .LVL424:
		5813	756:../libBME280/src/bme280.c ****
		5814	3445 .loc 1 756 16 view .LVU907
		5815	3446 0028 FFF7FEFF bl bme280_get_regs
		5816	3447 .LVL425:
		5817	758:../libBME280/src/bme280.c **** {
		5818	3448 .loc 1 758 9 is_stmt 1 view .LVU908
		5819	758:../libBME280/src/bme280.c **** {
		5820	3449 .loc 1 758 12 is_stmt 0 view .LVU909
		5821	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 98
		5822
		5823
		5824	3450 002c 0346 mov r3, r0
		5825	3451 002e 10B1 cbz r0, .L176
		5826	3452 .LVL426:
		5827	3453 .L172:
		5828	774:../libBME280/src/bme280.c **** }
		5829	3454 .loc 1 774 5 is_stmt 1 view .LVU910
		5830	775:../libBME280/src/bme280.c ****
		5831	3455 .loc 1 775 1 is_stmt 0 view .LVU911
		5832	3456 0030 1846 mov r0, r3
		5833	3457 0032 06B0 add sp, sp, #24
		5834	3458 .LCFI66:
		5835	3459 .cfi_remember_state
		5836	3460 .cfi_def_cfa_offset 16
		5837	3461 @ sp needed
		5838	3462 0034 70BD pop {r4, r5, r6, pc}
		5839	3463 .LVL427:
		5840	3464 .L176:
		5841	3465 .LCFI67:
		5842	3466 .cfi_restore_state
		5843	761:../libBME280/src/bme280.c ****
		5844	3467 .loc 1 761 13 is_stmt 1 view .LVU912
		5845	3468 0036 01A9 add r1, sp, #4
		5846	3469 0038 04A8 add r0, sp, #16
		5847	3470 .LVL428:
		5848	761:../libBME280/src/bme280.c ****
		5849	3471 .loc 1 761 13 is_stmt 0 view .LVU913
		5850	3472 003a FFF7FEFF bl bme280_parse_sensor_data
		5851	3473 .LVL429:
		5852	766:../libBME280/src/bme280.c **** }
		5853	3474 .loc 1 766 13 is_stmt 1 view .LVU914
		5854	766:../libBME280/src/bme280.c **** }
		5855	3475 .loc 1 766 20 is_stmt 0 view .LVU915
		5856	3476 003e 04F11803 add r3, r4, #24
		5857	3477 0042 2A46 mov r2, r5
		5858	3478 0044 01A9 add r1, sp, #4
		5859	3479 0046 3046 mov r0, r6
		5860	3480 0048 FFF7FEFF bl bme280_compensate_data
		5861	3481 .LVL430:
		5862	3482 004c 0346 mov r3, r0
		5863	3483 .LVL431:
		5864	766:../libBME280/src/bme280.c **** }
		5865	3484 .loc 1 766 20 view .LVU916
		5866	3485 004e EFE7 b .L172
		5867	3486 .LVL432:
		5868	3487 .L173:
		5869	771:../libBME280/src/bme280.c **** }
		5870	3488 .loc 1 771 14 view .LVU917
		5871	3489 0050 4FF0FF33 mov r3, #-1
		5872	3490 0054 ECE7 b .L172
		5873	3491 .L174:
		5874	3492 0056 4FF0FF33 mov r3, #-1
		5875	3493 005a E9E7 b .L172
		5876	3494 .cfi_endproc
		5877	3495 .LFE8:
		5878	3497 .section .text.bme280_cal_meas_delay,"ax",%progbits
		5879	3498 .align 1
		5880	3499 .global bme280_cal_meas_delay
		5881	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 99
		5882
		5883
		5884	3500 .syntax unified
		5885	3501 .thumb
		5886	3502 .thumb_func
		5887	3503 .fpu softvfp
		5888	3505 bme280_cal_meas_delay:
		5889	3506 .LVL433:
		5890	3507 .LFB11:
		5891	857:../libBME280/src/bme280.c **** uint32_t max_delay;
		5892	3508 .loc 1 857 1 is_stmt 1 view -0
		5893	3509 .cfi_startproc
		5894	3510 @ args = 0, pretend = 0, frame = 8
		5895	3511 @ frame_needed = 0, uses_anonymous_args = 0
		5896	3512 @ link register save eliminated.
		5897	857:../libBME280/src/bme280.c **** uint32_t max_delay;
		5898	3513 .loc 1 857 1 is_stmt 0 view .LVU919
		5899	3514 0000 82B0 sub sp, sp, #8
		5900	3515 .LCFI68:
		5901	3516 .cfi_def_cfa_offset 8
		5902	3517 0002 0246 mov r2, r0
		5903	858:../libBME280/src/bme280.c **** uint8_t temp_osr;
		5904	3518 .loc 1 858 5 is_stmt 1 view .LVU920
		5905	859:../libBME280/src/bme280.c **** uint8_t pres_osr;
		5906	3519 .loc 1 859 5 view .LVU921
		5907	860:../libBME280/src/bme280.c **** uint8_t hum_osr;
		5908	3520 .loc 1 860 5 view .LVU922
		5909	861:../libBME280/src/bme280.c ****
		5910	3521 .loc 1 861 5 view .LVU923
		5911	864:../libBME280/src/bme280.c ****
		5912	3522 .loc 1 864 5 view .LVU924
		5913	864:../libBME280/src/bme280.c ****
		5914	3523 .loc 1 864 13 is_stmt 0 view .LVU925
		5915	3524 0004 1C4B ldr r3, .L185
		5916	3525 0006 93E80300 ldm r3, {r0, r1}
		5917	3526 .LVL434:
		5918	864:../libBME280/src/bme280.c ****
		5919	3527 .loc 1 864 13 view .LVU926
		5920	3528 000a 0090 str r0, [sp]
		5921	3529 000c ADF80410 strh r1, [sp, #4] @ movhi
		5922	867:../libBME280/src/bme280.c **** {
		5923	3530 .loc 1 867 5 is_stmt 1 view .LVU927
		5924	867:../libBME280/src/bme280.c **** {
		5925	3531 .loc 1 867 17 is_stmt 0 view .LVU928
		5926	3532 0010 5378 ldrb r3, [r2, #1] @ zero_extendqisi2
		5927	867:../libBME280/src/bme280.c **** {
		5928	3533 .loc 1 867 8 view .LVU929
		5929	3534 0012 052B cmp r3, #5
		5930	3535 0014 04D8 bhi .L181
		5931	869:../libBME280/src/bme280.c **** }
		5932	3536 .loc 1 869 9 is_stmt 1 view .LVU930
		5933	869:../libBME280/src/bme280.c **** }
		5934	3537 .loc 1 869 18 is_stmt 0 view .LVU931
		5935	3538 0016 02A9 add r1, sp, #8
		5936	3539 0018 0B44 add r3, r3, r1
		5937	3540 001a 13F8083C ldrb r3, [r3, #-8] @ zero_extendqisi2
		5938	3541 .LVL435:
		5939	869:../libBME280/src/bme280.c **** }
		5940	3542 .loc 1 869 18 view .LVU932
		5941	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 100
		5942
		5943
		5944	3543 001e 00E0 b .L178
		5945	3544 .LVL436:
		5946	3545 .L181:
		5947	873:../libBME280/src/bme280.c **** }
		5948	3546 .loc 1 873 18 view .LVU933
		5949	3547 0020 1023 movs r3, #16
		5950	3548 .L178:
		5951	3549 .LVL437:
		5952	876:../libBME280/src/bme280.c **** {
		5953	3550 .loc 1 876 5 is_stmt 1 view .LVU934
		5954	876:../libBME280/src/bme280.c **** {
		5955	3551 .loc 1 876 17 is_stmt 0 view .LVU935
		5956	3552 0022 1178 ldrb r1, [r2] @ zero_extendqisi2
		5957	876:../libBME280/src/bme280.c **** {
		5958	3553 .loc 1 876 8 view .LVU936
		5959	3554 0024 0529 cmp r1, #5
		5960	3555 0026 04D8 bhi .L182
		5961	878:../libBME280/src/bme280.c **** }
		5962	3556 .loc 1 878 9 is_stmt 1 view .LVU937
		5963	878:../libBME280/src/bme280.c **** }
		5964	3557 .loc 1 878 18 is_stmt 0 view .LVU938
		5965	3558 0028 02A8 add r0, sp, #8
		5966	3559 002a 0144 add r1, r1, r0
		5967	3560 002c 11F8081C ldrb r1, [r1, #-8] @ zero_extendqisi2
		5968	3561 .LVL438:
		5969	878:../libBME280/src/bme280.c **** }
		5970	3562 .loc 1 878 18 view .LVU939
		5971	3563 0030 00E0 b .L179
		5972	3564 .LVL439:
		5973	3565 .L182:
		5974	882:../libBME280/src/bme280.c **** }
		5975	3566 .loc 1 882 18 view .LVU940
		5976	3567 0032 1021 movs r1, #16
		5977	3568 .L179:
		5978	3569 .LVL440:
		5979	885:../libBME280/src/bme280.c **** {
		5980	3570 .loc 1 885 5 is_stmt 1 view .LVU941
		5981	885:../libBME280/src/bme280.c **** {
		5982	3571 .loc 1 885 17 is_stmt 0 view .LVU942
		5983	3572 0034 9278 ldrb r2, [r2, #2] @ zero_extendqisi2
		5984	3573 .LVL441:
		5985	885:../libBME280/src/bme280.c **** {
		5986	3574 .loc 1 885 8 view .LVU943
		5987	3575 0036 052A cmp r2, #5
		5988	3576 0038 04D8 bhi .L183
		5989	887:../libBME280/src/bme280.c **** }
		5990	3577 .loc 1 887 9 is_stmt 1 view .LVU944
		5991	887:../libBME280/src/bme280.c **** }
		5992	3578 .loc 1 887 17 is_stmt 0 view .LVU945
		5993	3579 003a 02A8 add r0, sp, #8
		5994	3580 003c 0244 add r2, r2, r0
		5995	3581 003e 12F8080C ldrb r0, [r2, #-8] @ zero_extendqisi2
		5996	3582 .LVL442:
		5997	887:../libBME280/src/bme280.c **** }
		5998	3583 .loc 1 887 17 view .LVU946
		5999	3584 0042 00E0 b .L180
		6000	3585 .LVL443:
		6001	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 101
		6002
		6003
		6004	3586 .L183:
		6005	891:../libBME280/src/bme280.c **** }
		6006	3587 .loc 1 891 17 view .LVU947
		6007	3588 0044 1020 movs r0, #16
		6008	3589 .L180:
		6009	3590 .LVL444:
		6010	894:../libBME280/src/bme280.c **** (uint32_t)((BME280_MEAS_OFFSET + (BME280_MEAS_DUR * temp_osr) +
		6011	3591 .loc 1 894 5 is_stmt 1 view .LVU948
		6012	895:../libBME280/src/bme280.c **** ((BME280_MEAS_DUR * pres_osr) + BME280_PRES_HUM_MEAS_OFFSET) +
		6013	3592 .loc 1 895 59 is_stmt 0 view .LVU949
		6014	3593 0046 40F6FC02 movw r2, #2300
		6015	3594 004a 02FB03F3 mul r3, r2, r3
		6016	3595 .LVL445:
		6017	895:../libBME280/src/bme280.c **** ((BME280_MEAS_DUR * pres_osr) + BME280_PRES_HUM_MEAS_OFFSET) +
		6018	3596 .loc 1 895 40 view .LVU950
		6019	3597 004e 03F2E243 addw r3, r3, #1250
		6020	896:../libBME280/src/bme280.c **** ((BME280_MEAS_DUR * hum_osr) + BME280_PRES_HUM_MEAS_OFFSET)) / BME280_MEAS_SCAL
		6021	3598 .loc 1 896 39 view .LVU951
		6022	3599 0052 02FB01F1 mul r1, r2, r1
		6023	3600 .LVL446:
		6024	896:../libBME280/src/bme280.c **** ((BME280_MEAS_DUR * hum_osr) + BME280_PRES_HUM_MEAS_OFFSET)) / BME280_MEAS_SCAL
		6025	3601 .loc 1 896 51 view .LVU952
		6026	3602 0056 01F23F21 addw r1, r1, #575
		6027	895:../libBME280/src/bme280.c **** ((BME280_MEAS_DUR * pres_osr) + BME280_PRES_HUM_MEAS_OFFSET) +
		6028	3603 .loc 1 895 71 view .LVU953
		6029	3604 005a 0B44 add r3, r3, r1
		6030	897:../libBME280/src/bme280.c ****
		6031	3605 .loc 1 897 39 view .LVU954
		6032	3606 005c 02FB00F2 mul r2, r2, r0
		6033	897:../libBME280/src/bme280.c ****
		6034	3607 .loc 1 897 50 view .LVU955
		6035	3608 0060 02F23F20 addw r0, r2, #575
		6036	3609 .LVL447:
		6037	896:../libBME280/src/bme280.c **** ((BME280_MEAS_DUR * hum_osr) + BME280_PRES_HUM_MEAS_OFFSET)) / BME280_MEAS_SCAL
		6038	3610 .loc 1 896 82 view .LVU956
		6039	3611 0064 0344 add r3, r3, r0
		6040	897:../libBME280/src/bme280.c ****
		6041	3612 .loc 1 897 82 view .LVU957
		6042	3613 0066 0548 ldr r0, .L185+4
		6043	3614 0068 80FB0320 smull r2, r0, r0, r3
		6044	3615 006c DB17 asrs r3, r3, #31
		6045	3616 .LVL448:
		6046	899:../libBME280/src/bme280.c **** }
		6047	3617 .loc 1 899 5 is_stmt 1 view .LVU958
		6048	900:../libBME280/src/bme280.c ****
		6049	3618 .loc 1 900 1 is_stmt 0 view .LVU959
		6050	3619 006e C3EBA010 rsb r0, r3, r0, asr #6
		6051	3620 .LVL449:
		6052	900:../libBME280/src/bme280.c ****
		6053	3621 .loc 1 900 1 view .LVU960
		6054	3622 0072 02B0 add sp, sp, #8
		6055	3623 .LCFI69:
		6056	3624 .cfi_def_cfa_offset 0
		6057	3625 @ sp needed
		6058	3626 0074 7047 bx lr
		6059	3627 .L186:
		6060	3628 0076 00BF .align 2
		6061	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 102
		6062
		6063
		6064	3629 .L185:
		6065	3630 0078 00000000 .word .LANCHOR0
		6066	3631 007c D34D6210 .word 274877907
		6067	3632 .cfi_endproc
		6068	3633 .LFE11:
		6069	3635 .section .rodata
		6070	3636 .align 2
		6071	3637 .set .LANCHOR0,. + 0
		6072	3638 .LC0:
		6073	3639 0000 00 .byte 0
		6074	3640 0001 01 .byte 1
		6075	3641 0002 02 .byte 2
		6076	3642 0003 04 .byte 4
		6077	3643 0004 08 .byte 8
		6078	3644 0005 10 .byte 16
		6079	3645 .text
		6080	3646 .Letext0:
		6081	3647 .file 2 "c:\\users\\mike\\appdata\\roaming\\xpacks\\@gnu-mcu-eclipse\\arm-none-eabi-gcc\\8.2.1-1.7
		6082	3648 .file 3 "c:\\users\\mike\\appdata\\roaming\\xpacks\\@gnu-mcu-eclipse\\arm-none-eabi-gcc\\8.2.1-1.7
		6083	3649 .file 4 "../libBME280/inc/libBME280/bme280_defs.h"
		6084	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 103
		6085
		6086
		6087	DEFINED SYMBOLS
		6088	ABS:0000000000000000 bme280.c
		6089	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:16 .text.fill_filter_settings:0000000000000000 $t
		6090	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:23 .text.fill_filter_settings:0000000000000000 fill_filter_settings
		6091	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:48 .text.fill_standby_settings:0000000000000000 $t
		6092	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:54 .text.fill_standby_settings:0000000000000000 fill_standby_settings
		6093	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:76 .text.fill_osr_press_settings:0000000000000000 $t
		6094	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:82 .text.fill_osr_press_settings:0000000000000000 fill_osr_press_settings
		6095	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:106 .text.fill_osr_temp_settings:0000000000000000 $t
		6096	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:112 .text.fill_osr_temp_settings:0000000000000000 fill_osr_temp_settings
		6097	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:134 .text.parse_device_settings:0000000000000000 $t
		6098	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:140 .text.parse_device_settings:0000000000000000 parse_device_settings
		6099	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:193 .text.compensate_temperature:0000000000000000 $t
		6100	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:199 .text.compensate_temperature:0000000000000000 compensate_temperature
		6101	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:396 .text.compensate_temperature:00000000000000ec $d
		6102	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:407 .text.compensate_pressure:0000000000000000 $t
		6103	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:413 .text.compensate_pressure:0000000000000000 compensate_pressure
		6104	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:788 .text.compensate_pressure:0000000000000218 $d
		6105	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:806 .text.compensate_humidity:0000000000000000 $t
		6106	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:812 .text.compensate_humidity:0000000000000000 compensate_humidity
		6107	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1089 .text.compensate_humidity:000000000000015c $d
		6108	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1100 .text.interleave_reg_addr:0000000000000000 $t
		6109	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1106 .text.interleave_reg_addr:0000000000000000 interleave_reg_addr
		6110	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1168 .text.parse_temp_press_calib_data:0000000000000000 $t
		6111	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1174 .text.parse_temp_press_calib_data:0000000000000000 parse_temp_press_calib_data
		6112	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1287 .text.parse_humidity_calib_data:0000000000000000 $t
		6113	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1293 .text.parse_humidity_calib_data:0000000000000000 parse_humidity_calib_data
		6114	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1371 .text.are_settings_changed:0000000000000000 $t
		6115	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1377 .text.are_settings_changed:0000000000000000 are_settings_changed
		6116	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1407 .text.null_ptr_check:0000000000000000 $t
		6117	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1413 .text.null_ptr_check:0000000000000000 null_ptr_check
		6118	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1475 .text.bme280_get_regs:0000000000000000 $t
		6119	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1482 .text.bme280_get_regs:0000000000000000 bme280_get_regs
		6120	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1570 .text.get_calib_data:0000000000000000 $t
		6121	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1576 .text.get_calib_data:0000000000000000 get_calib_data
		6122	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1669 .text.bme280_set_regs:0000000000000000 $t
		6123	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1676 .text.bme280_set_regs:0000000000000000 bme280_set_regs
		6124	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1847 .text.set_osr_humidity_settings:0000000000000000 $t
		6125	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1853 .text.set_osr_humidity_settings:0000000000000000 set_osr_humidity_settings
		6126	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1951 .text.set_osr_press_temp_settings:0000000000000000 $t
		6127	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:1957 .text.set_osr_press_temp_settings:0000000000000000 set_osr_press_temp_settings
		6128	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2055 .text.set_osr_settings:0000000000000000 $t
		6129	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2061 .text.set_osr_settings:0000000000000000 set_osr_settings
		6130	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2127 .text.set_filter_standby_settings:0000000000000000 $t
		6131	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2133 .text.set_filter_standby_settings:0000000000000000 set_filter_standby_settings
		6132	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2231 .text.reload_device_settings:0000000000000000 $t
		6133	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2237 .text.reload_device_settings:0000000000000000 reload_device_settings
		6134	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2295 .text.write_power_mode:0000000000000000 $t
		6135	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2301 .text.write_power_mode:0000000000000000 write_power_mode
		6136	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2383 .text.bme280_get_sensor_settings:0000000000000000 $t
		6137	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2390 .text.bme280_get_sensor_settings:0000000000000000 bme280_get_sensor_settings
		6138	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2460 .text.bme280_get_sensor_mode:0000000000000000 $t
		6139	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2467 .text.bme280_get_sensor_mode:0000000000000000 bme280_get_sensor_mode
		6140	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2536 .text.bme280_soft_reset:0000000000000000 $t
		6141	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2543 .text.bme280_soft_reset:0000000000000000 bme280_soft_reset
		6142	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2671 .text.bme280_init:0000000000000000 $t
		6143	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2678 .text.bme280_init:0000000000000000 bme280_init
		6144	ARM GAS C:\Users\mike\AppData\Local\Temp\cci3lQTU.s page 104
		6145
		6146
		6147	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2812 .text.put_device_to_sleep:0000000000000000 $t
		6148	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2818 .text.put_device_to_sleep:0000000000000000 put_device_to_sleep
		6149	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2900 .text.bme280_set_sensor_settings:0000000000000000 $t
		6150	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:2907 .text.bme280_set_sensor_settings:0000000000000000 bme280_set_sensor_settings
		6151	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3038 .text.bme280_set_sensor_mode:0000000000000000 $t
		6152	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3045 .text.bme280_set_sensor_mode:0000000000000000 bme280_set_sensor_mode
		6153	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3142 .text.bme280_parse_sensor_data:0000000000000000 $t
		6154	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3149 .text.bme280_parse_sensor_data:0000000000000000 bme280_parse_sensor_data
		6155	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3236 .text.bme280_compensate_data:0000000000000000 $t
		6156	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3243 .text.bme280_compensate_data:0000000000000000 bme280_compensate_data
		6157	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3387 .text.bme280_get_sensor_data:0000000000000000 $t
		6158	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3394 .text.bme280_get_sensor_data:0000000000000000 bme280_get_sensor_data
		6159	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3498 .text.bme280_cal_meas_delay:0000000000000000 $t
		6160	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3505 .text.bme280_cal_meas_delay:0000000000000000 bme280_cal_meas_delay
		6161	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3630 .text.bme280_cal_meas_delay:0000000000000078 $d
		6162	C:\Users\mike\AppData\Local\Temp\cci3lQTU.s:3636 .rodata:0000000000000000 $d
		6163
		6164	UNDEFINED SYMBOLS
		6165	__aeabi_ui2d
		6166	__aeabi_dmul
		6167	__aeabi_dsub
		6168	__aeabi_i2d
		6169	__aeabi_dadd
		6170	__aeabi_d2iz
		6171	__aeabi_ddiv
		6172	__aeabi_dcmplt
		6173	__aeabi_dcmpgt

Subversion Repositories dashGPS

(root)/branches/dashGPS-bmp/build/bme280.lst – Rev 19