Subversion Repositories dashGPS

/**

  ******************************************************************************

  * @file    stm32f1xx_hal_sram.c

  * @author  MCD Application Team

  * @brief   SRAM HAL module driver.

  *          This file provides a generic firmware to drive SRAM memories

  *          mounted as external device.

  *

  @verbatim

  ==============================================================================

                          ##### How to use this driver #####

  ==============================================================================

  [..]

    This driver is a generic layered driver which contains a set of APIs used to

    control SRAM memories. It uses the FSMC layer functions to interface

    with SRAM devices.

    The following sequence should be followed to configure the FSMC to interface

    with SRAM/PSRAM memories:

   (#) Declare a SRAM_HandleTypeDef handle structure, for example:

          SRAM_HandleTypeDef  hsram; and:

       (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed

            values of the structure member.

       (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined

            base register instance for NOR or SRAM device

       (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined

            base register instance for NOR or SRAM extended mode

   (#) Declare two FSMC_NORSRAM_TimingTypeDef structures, for both normal and extended

       mode timings; for example:

          FSMC_NORSRAM_TimingTypeDef  Timing and FSMC_NORSRAM_TimingTypeDef  ExTiming;

      and fill its fields with the allowed values of the structure member.

   (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function

       performs the following sequence:

       (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit()

       (##) Control register configuration using the FSMC NORSRAM interface function

            FSMC_NORSRAM_Init()

       (##) Timing register configuration using the FSMC NORSRAM interface function

            FSMC_NORSRAM_Timing_Init()

       (##) Extended mode Timing register configuration using the FSMC NORSRAM interface function

            FSMC_NORSRAM_Extended_Timing_Init()

       (##) Enable the SRAM device using the macro __FSMC_NORSRAM_ENABLE()

   (#) At this stage you can perform read/write accesses from/to the memory connected

       to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the

       following APIs:

       (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access

       (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer

   (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/

       HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation

   (#) You can continuously monitor the SRAM device HAL state by calling the function

       HAL_SRAM_GetState()

       *** Callback registration ***

    =============================================

    [..]

      The compilation define  USE_HAL_SRAM_REGISTER_CALLBACKS when set to 1

      allows the user to configure dynamically the driver callbacks.

      Use Functions @ref HAL_SRAM_RegisterCallback() to register a user callback,

      it allows to register following callbacks:

        (+) MspInitCallback    : SRAM MspInit.

        (+) MspDeInitCallback  : SRAM MspDeInit.

      This function takes as parameters the HAL peripheral handle, the Callback ID

      and a pointer to the user callback function.

      Use function @ref HAL_SRAM_UnRegisterCallback() to reset a callback to the default

      weak (surcharged) function. It allows to reset following callbacks:

        (+) MspInitCallback    : SRAM MspInit.

        (+) MspDeInitCallback  : SRAM MspDeInit.

      This function) takes as parameters the HAL peripheral handle and the Callback ID.

      By default, after the @ref HAL_SRAM_Init and if the state is HAL_SRAM_STATE_RESET

      all callbacks are reset to the corresponding legacy weak (surcharged) functions.

      Exception done for MspInit and MspDeInit callbacks that are respectively

      reset to the legacy weak (surcharged) functions in the @ref HAL_SRAM_Init

      and @ref  HAL_SRAM_DeInit only when these callbacks are null (not registered beforehand).

      If not, MspInit or MspDeInit are not null, the @ref HAL_SRAM_Init and @ref HAL_SRAM_DeInit

      keep and use the user MspInit/MspDeInit callbacks (registered beforehand)

      Callbacks can be registered/unregistered in READY state only.

      Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered

      in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used

      during the Init/DeInit.

      In that case first register the MspInit/MspDeInit user callbacks

      using @ref HAL_SRAM_RegisterCallback before calling @ref HAL_SRAM_DeInit

      or @ref HAL_SRAM_Init function.

      When The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS is set to 0 or

      not defined, the callback registering feature is not available

      and weak (surcharged) callbacks are used.

  @endverbatim

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

  * All rights reserved.</center></h2>

  *

  * This software component is licensed by ST under BSD 3-Clause license,

  * the "License"; You may not use this file except in compliance with the

  * License. You may obtain a copy of the License at:

  *                       opensource.org/licenses/BSD-3-Clause

  *

  ******************************************************************************

  */

/* Includes ------------------------------------------------------------------*/

#include "stm32f1xx_hal.h"

#if defined FSMC_BANK1

/** @addtogroup STM32F1xx_HAL_Driver

  * @{

  */

#ifdef HAL_SRAM_MODULE_ENABLED

/** @defgroup SRAM SRAM

  * @brief SRAM driver modules

  * @{

  */

/**

  @cond 0

  */

/* Private typedef -----------------------------------------------------------*/

/* Private define ------------------------------------------------------------*/

/* Private macro -------------------------------------------------------------*/

/* Private variables ---------------------------------------------------------*/

/* Private function prototypes -----------------------------------------------*/

static void SRAM_DMACplt    (DMA_HandleTypeDef *hdma);

static void SRAM_DMACpltProt(DMA_HandleTypeDef *hdma);

static void SRAM_DMAError   (DMA_HandleTypeDef *hdma);

/**

  @endcond

  */

/* Exported functions --------------------------------------------------------*/

/** @defgroup SRAM_Exported_Functions SRAM Exported Functions

  * @{

  */

/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions

  * @brief    Initialization and Configuration functions.

  *

  @verbatim

  ==============================================================================

           ##### SRAM Initialization and de_initialization functions #####

  ==============================================================================

    [..]  This section provides functions allowing to initialize/de-initialize

          the SRAM memory

@endverbatim

  * @{

  */

/**

  * @brief  Performs the SRAM device initialization sequence

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  Timing Pointer to SRAM control timing structure

  * @param  ExtTiming Pointer to SRAM extended mode timing structure

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FSMC_NORSRAM_TimingTypeDef *Timing, FSMC_NORSRAM_TimingTypeDef *ExtTiming)

{

  /* Check the SRAM handle parameter */

  if (hsram == NULL)

  {

    return HAL_ERROR;

  }

  if (hsram->State == HAL_SRAM_STATE_RESET)

  {

    /* Allocate lock resource and initialize it */

    hsram->Lock = HAL_UNLOCKED;

#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)

    if(hsram->MspInitCallback == NULL)

    {

      hsram->MspInitCallback = HAL_SRAM_MspInit;

    }

    hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;

    hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;

    /* Init the low level hardware */

    hsram->MspInitCallback(hsram);

#else

    /* Initialize the low level hardware (MSP) */

    HAL_SRAM_MspInit(hsram);

#endif

  }

  /* Initialize SRAM control Interface */

  (void)FSMC_NORSRAM_Init(hsram->Instance, &(hsram->Init));

  /* Initialize SRAM timing Interface */

  (void)FSMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank);

  /* Initialize SRAM extended mode timing Interface */

  (void)FSMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank,  hsram->Init.ExtendedMode);

  /* Enable the NORSRAM device */

  __FSMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank);

  /* Initialize the SRAM controller state */

  hsram->State = HAL_SRAM_STATE_READY;

  return HAL_OK;

}

/**

  * @brief  Performs the SRAM device De-initialization sequence.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram)

{

#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)

  if(hsram->MspDeInitCallback == NULL)

  {

    hsram->MspDeInitCallback = HAL_SRAM_MspDeInit;

  }

  /* DeInit the low level hardware */

  hsram->MspDeInitCallback(hsram);

#else

  /* De-Initialize the low level hardware (MSP) */

  HAL_SRAM_MspDeInit(hsram);

#endif

  /* Configure the SRAM registers with their reset values */

  (void)FSMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);

  /* Reset the SRAM controller state */

  hsram->State = HAL_SRAM_STATE_RESET;

  /* Release Lock */

  __HAL_UNLOCK(hsram);

  return HAL_OK;

}

/**

  * @brief  SRAM MSP Init.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @retval None

  */

__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram)

{

  /* Prevent unused argument(s) compilation warning */

  UNUSED(hsram);

  /* NOTE : This function Should not be modified, when the callback is needed,

            the HAL_SRAM_MspInit could be implemented in the user file

   */

}

/**

  * @brief  SRAM MSP DeInit.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @retval None

  */

__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram)

{

  /* Prevent unused argument(s) compilation warning */

  UNUSED(hsram);

  /* NOTE : This function Should not be modified, when the callback is needed,

            the HAL_SRAM_MspDeInit could be implemented in the user file

   */

}

/**

  * @brief  DMA transfer complete callback.

  * @param  hdma pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @retval None

  */

__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)

{

  /* Prevent unused argument(s) compilation warning */

  UNUSED(hdma);

  /* NOTE : This function Should not be modified, when the callback is needed,

            the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file

   */

}

/**

  * @brief  DMA transfer complete error callback.

  * @param  hdma pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @retval None

  */

__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)

{

  /* Prevent unused argument(s) compilation warning */

  UNUSED(hdma);

  /* NOTE : This function Should not be modified, when the callback is needed,

            the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file

   */

}

/**

  * @}

  */

/** @defgroup SRAM_Exported_Functions_Group2 Input Output and memory control functions

  * @brief    Input Output and memory control functions

  *

  @verbatim

  ==============================================================================

                  ##### SRAM Input and Output functions #####

  ==============================================================================

  [..]

    This section provides functions allowing to use and control the SRAM memory

@endverbatim

  * @{

  */

/**

  * @brief  Reads 8-bit buffer from SRAM memory.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  pAddress Pointer to read start address

  * @param  pDstBuffer Pointer to destination buffer

  * @param  BufferSize Size of the buffer to read from memory

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)

{

  uint32_t size;

  __IO uint8_t *psramaddress = (uint8_t *)pAddress;

  uint8_t * pdestbuff = pDstBuffer;

  HAL_SRAM_StateTypeDef state = hsram->State;

  /* Check the SRAM controller state */

  if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED))

  {

    /* Process Locked */

    __HAL_LOCK(hsram);

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_BUSY;

    /* Read data from memory */

    for (size = BufferSize; size != 0U; size--)

    {

      *pdestbuff = *psramaddress;

      pdestbuff++;

      psramaddress++;

    }

    /* Update the SRAM controller state */

    hsram->State = state;

    /* Process unlocked */

    __HAL_UNLOCK(hsram);

  }

  else

  {

    return HAL_ERROR;

  }

  return HAL_OK;

}

/**

  * @brief  Writes 8-bit buffer to SRAM memory.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  pAddress Pointer to write start address

  * @param  pSrcBuffer Pointer to source buffer to write

  * @param  BufferSize Size of the buffer to write to memory

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)

{

  uint32_t size;

  __IO uint8_t *psramaddress = (uint8_t *)pAddress;

  uint8_t * psrcbuff = pSrcBuffer;

  /* Check the SRAM controller state */

  if (hsram->State == HAL_SRAM_STATE_READY)

  {

    /* Process Locked */

    __HAL_LOCK(hsram);

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_BUSY;

    /* Write data to memory */

    for (size = BufferSize; size != 0U; size--)

    {

      *psramaddress = *psrcbuff;

      psrcbuff++;

      psramaddress++;

    }

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_READY;

    /* Process unlocked */

    __HAL_UNLOCK(hsram);

  }

  else

  {

    return HAL_ERROR;

  }

  return HAL_OK;

}

/**

  * @brief  Reads 16-bit buffer from SRAM memory.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  pAddress Pointer to read start address

  * @param  pDstBuffer Pointer to destination buffer

  * @param  BufferSize Size of the buffer to read from memory

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)

{

  uint32_t size;

  __IO uint32_t *psramaddress = pAddress;

  uint16_t *pdestbuff = pDstBuffer;

  uint8_t limit;

  HAL_SRAM_StateTypeDef state = hsram->State;

  /* Check the SRAM controller state */

  if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED))

  {

    /* Process Locked */

    __HAL_LOCK(hsram);

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_BUSY;

    /* Check if the size is a 32-bits mulitple */

    limit = (((BufferSize % 2U) != 0U) ? 1U : 0U);

    /* Read data from memory */

    for (size = BufferSize; size != limit; size-=2U)

    {

      *pdestbuff = (uint16_t)((*psramaddress) & 0x0000FFFFU);

      pdestbuff++;

      *pdestbuff = (uint16_t)(((*psramaddress) & 0xFFFF0000U) >> 16U);

      pdestbuff++;

      psramaddress++;

    }

    /* Read last 16-bits if size is not 32-bits multiple */

    if (limit != 0U)

    {

      *pdestbuff = (uint16_t)((*psramaddress) & 0x0000FFFFU);

    }

    /* Update the SRAM controller state */

    hsram->State = state;

    /* Process unlocked */

    __HAL_UNLOCK(hsram);

  }

  else

  {

    return HAL_ERROR;

  }

  return HAL_OK;

}

/**

  * @brief  Writes 16-bit buffer to SRAM memory.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  pAddress Pointer to write start address

  * @param  pSrcBuffer Pointer to source buffer to write

  * @param  BufferSize Size of the buffer to write to memory

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)

{

  uint32_t size;

  __IO uint32_t *psramaddress = pAddress;

  uint16_t * psrcbuff = pSrcBuffer;

  uint8_t limit;

  /* Check the SRAM controller state */

  if (hsram->State == HAL_SRAM_STATE_READY)

  {

    /* Process Locked */

    __HAL_LOCK(hsram);

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_BUSY;

    /* Check if the size is a 32-bits mulitple */

    limit = (((BufferSize % 2U) != 0U) ? 1U : 0U);

    /* Write data to memory */

    for (size = BufferSize; size != limit; size-=2U)

    {

      *psramaddress = (uint32_t)(*psrcbuff);

      psrcbuff++;

      *psramaddress |= ((uint32_t)(*psrcbuff) << 16U);

      psrcbuff++;

      psramaddress++;

    }

    /* Write last 16-bits if size is not 32-bits multiple */

    if (limit != 0U)

    {

      *psramaddress = ((uint32_t)(*psrcbuff) & 0x0000FFFFU) | ((*psramaddress) & 0xFFFF0000U);

    }

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_READY;

    /* Process unlocked */

    __HAL_UNLOCK(hsram);

  }

  else

  {

    return HAL_ERROR;

  }

  return HAL_OK;

}

/**

  * @brief  Reads 32-bit buffer from SRAM memory.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  pAddress Pointer to read start address

  * @param  pDstBuffer Pointer to destination buffer

  * @param  BufferSize Size of the buffer to read from memory

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)

{

  uint32_t size;

  __IO uint32_t * psramaddress = pAddress;

  uint32_t * pdestbuff = pDstBuffer;

  HAL_SRAM_StateTypeDef state = hsram->State;

  /* Check the SRAM controller state */

  if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED))

  {

    /* Process Locked */

    __HAL_LOCK(hsram);

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_BUSY;

    /* Read data from memory */

    for (size = BufferSize; size != 0U; size--)

    {

      *pdestbuff = *psramaddress;

      pdestbuff++;

      psramaddress++;

    }

    /* Update the SRAM controller state */

    hsram->State = state;

    /* Process unlocked */

    __HAL_UNLOCK(hsram);

  }

  else

  {

    return HAL_ERROR;

  }

  return HAL_OK;

}

/**

  * @brief  Writes 32-bit buffer to SRAM memory.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  pAddress Pointer to write start address

  * @param  pSrcBuffer Pointer to source buffer to write

  * @param  BufferSize Size of the buffer to write to memory

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)

{

  uint32_t size;

  __IO uint32_t * psramaddress = pAddress;

  uint32_t * psrcbuff = pSrcBuffer;

  /* Check the SRAM controller state */

  if (hsram->State == HAL_SRAM_STATE_READY)

  {

    /* Process Locked */

    __HAL_LOCK(hsram);

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_BUSY;

    /* Write data to memory */

    for (size = BufferSize; size != 0U; size--)

    {

      *psramaddress = *psrcbuff;

      psrcbuff++;

      psramaddress++;

    }

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_READY;

    /* Process unlocked */

    __HAL_UNLOCK(hsram);

  }

  else

  {

    return HAL_ERROR;

  }

  return HAL_OK;

}

/**

  * @brief  Reads a Words data from the SRAM memory using DMA transfer.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  pAddress Pointer to read start address

  * @param  pDstBuffer Pointer to destination buffer

  * @param  BufferSize Size of the buffer to read from memory

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)

{

  HAL_StatusTypeDef status;

  HAL_SRAM_StateTypeDef state = hsram->State;

  /* Check the SRAM controller state */

  if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED))

  {

    /* Process Locked */

    __HAL_LOCK(hsram);

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_BUSY;

    /* Configure DMA user callbacks */

    if (state == HAL_SRAM_STATE_READY)

    {

      hsram->hdma->XferCpltCallback = SRAM_DMACplt;

    }

    else

    {

      hsram->hdma->XferCpltCallback = SRAM_DMACpltProt;

    }

    hsram->hdma->XferErrorCallback = SRAM_DMAError;

    /* Enable the DMA Stream */

    status = HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);

    /* Process unlocked */

    __HAL_UNLOCK(hsram);

  }

  else

  {

    return HAL_ERROR;

  }

  return status;

}

/**

  * @brief  Writes a Words data buffer to SRAM memory using DMA transfer.

  * @param  hsram pointer to a SRAM_HandleTypeDef structure that contains

  *                the configuration information for SRAM module.

  * @param  pAddress Pointer to write start address

  * @param  pSrcBuffer Pointer to source buffer to write

  * @param  BufferSize Size of the buffer to write to memory

  * @retval HAL status

  */

HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)

{

  HAL_StatusTypeDef status;

  /* Check the SRAM controller state */

  if (hsram->State == HAL_SRAM_STATE_READY)

  {

    /* Process Locked */

    __HAL_LOCK(hsram);

    /* Update the SRAM controller state */

    hsram->State = HAL_SRAM_STATE_BUSY;

    /* Configure DMA user callbacks */

    hsram->hdma->XferCpltCallback = SRAM_DMACplt;

    hsram->hdma->XferErrorCallback = SRAM_DMAError;

    /* Enable the DMA Stream */

    status = HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);

    /* Process unlocked */

    __HAL_UNLOCK(hsram);

  }

  else

  {

    return HAL_ERROR;

  }

  return status;

}

#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)

/**

  * @brief  Register a User SRAM Callback

  *         To be used instead of the weak (surcharged) predefined callback

  * @param hsram : SRAM handle

  * @param CallbackId : ID of the callback to be registered

  *        This parameter can be one of the following values:

  *          @arg @ref HAL_SRAM_MSP_INIT_CB_ID       SRAM MspInit callback ID

  *          @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID     SRAM MspDeInit callback ID

  * @param pCallback : pointer to the Callback function

  * @retval status

  */

HAL_StatusTypeDef HAL_SRAM_RegisterCallback (SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, pSRAM_CallbackTypeDef pCallback)

{

  HAL_StatusTypeDef status = HAL_OK;

  HAL_SRAM_StateTypeDef state;

  if(pCallback == NULL)

  {

    return HAL_ERROR;

  }

  /* Process locked */

  __HAL_LOCK(hsram);

  state = hsram->State;

  if((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_RESET) || (state == HAL_SRAM_STATE_PROTECTED))

  {

    switch (CallbackId)

    {

    case HAL_SRAM_MSP_INIT_CB_ID :

      hsram->MspInitCallback = pCallback;

      break;

    case HAL_SRAM_MSP_DEINIT_CB_ID :

      hsram->MspDeInitCallback = pCallback;

      break;

    default :

      /* update return status */

      status =  HAL_ERROR;

      break;

    }

  }

  else

  {

    /* update return status */

    status =  HAL_ERROR;

  }

  /* Release Lock */

  __HAL_UNLOCK(hsram);

  return status;

}

/**

  * @brief  Unregister a User SRAM Callback

  *         SRAM Callback is redirected to the weak (surcharged) predefined callback

  * @param hsram : SRAM handle

  * @param CallbackId : ID of the callback to be unregistered

  *        This parameter can be one of the following values:

  *          @arg @ref HAL_SRAM_MSP_INIT_CB_ID       SRAM MspInit callback ID

  *          @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID     SRAM MspDeInit callback ID

  *          @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID  SRAM DMA Xfer Complete callback ID

  *          @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID   SRAM DMA Xfer Error callback ID

  * @retval status

  */

HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback (SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId)

{

  HAL_StatusTypeDef status = HAL_OK;

  HAL_SRAM_StateTypeDef state;

  /* Process locked */

  __HAL_LOCK(hsram);

  state = hsram->State;

  if((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED))

  {

    switch (CallbackId)

    {

    case HAL_SRAM_MSP_INIT_CB_ID :

      hsram->MspInitCallback = HAL_SRAM_MspInit;

      break;

    case HAL_SRAM_MSP_DEINIT_CB_ID :

      hsram->MspDeInitCallback = HAL_SRAM_MspDeInit;

      break;

    case HAL_SRAM_DMA_XFER_CPLT_CB_ID :

      hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;

      break;

    case HAL_SRAM_DMA_XFER_ERR_CB_ID :

      hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;

      break;

    default :

      /* update return status */

      status =  HAL_ERROR;

      break;

    }

  }

  else if(state == HAL_SRAM_STATE_RESET)

  {

    switch (CallbackId)

    {

    case HAL_SRAM_MSP_INIT_CB_ID :

      hsram->MspInitCallback = HAL_SRAM_MspInit;

      break;

    case HAL_SRAM_MSP_DEINIT_CB_ID :

      hsram->MspDeInitCallback = HAL_SRAM_MspDeInit;

      break;

    default :

      /* update return status */

      status =  HAL_ERROR;

      break;

    }

  }

  else

  {

    /* update return status */

    status =  HAL_ERROR;

  }

  /* Release Lock */

  __HAL_UNLOCK(hsram);

  return status;

}

/**

  * @brief  Register a User SRAM Callback for DMA transfers

  *         To be used instead of the weak (surcharged) predefined callback

  * @param hsram : SRAM handle

  * @param CallbackId : ID of the callback to be registered

  *        This parameter can be one of the following values:

  *          @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID  SRAM DMA Xfer Complete callback ID

  *          @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID   SRAM DMA Xfer Error callback ID

  * @param pCallback : pointer to the Callback function

  * @retval status

  */

HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, pSRAM_DmaCallbackTypeDef pCallback)

{

  HAL_StatusTypeDef status = HAL_OK;

  HAL_SRAM_StateTypeDef state;

  if(pCallback == NULL)

  {

    return HAL_ERROR;

  }

  /* Process locked */

  __HAL_LOCK(hsram);

  state = hsram->State;

  if((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED))

  {

    switch (CallbackId)

    {

    case HAL_SRAM_DMA_XFER_CPLT_CB_ID :

      hsram->DmaXferCpltCallback = pCallback;

      break;

    case HAL_SRAM_DMA_XFER_ERR_CB_ID :

      hsram->DmaXferErrorCallback = pCallback;

      break;

    default :

      /* update return status */

      status =  HAL_ERROR;

      break;

    }

  }

  else

  {

    /* update return status */

    status =  HAL_ERROR;

  }

  /* Release Lock */

  __HAL_UNLOCK(hsram);

  return status;

}

#endif

/**

  * @}

  */

/** @defgroup SRAM_Exported_Functions_Group3 Control functions