Subversion Repositories dashGPS

/**

  ******************************************************************************

  * @file    stm32f1xx_hal_rtc.h

  * @author  MCD Application Team

  * @brief   Header file of RTC HAL module.

  ******************************************************************************

  * @attention

  *

  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

  * All rights reserved.</center></h2>

  *

  * This software component is licensed by ST under BSD 3-Clause license,

  * the "License"; You may not use this file except in compliance with the

  * License. You may obtain a copy of the License at:

  *                        opensource.org/licenses/BSD-3-Clause

  *

  ******************************************************************************

  */

/* Define to prevent recursive inclusion -------------------------------------*/

#ifndef __STM32F1xx_HAL_RTC_H

#define __STM32F1xx_HAL_RTC_H

#ifdef __cplusplus

extern "C" {

#endif

/* Includes ------------------------------------------------------------------*/

#include "stm32f1xx_hal_def.h"

/** @addtogroup STM32F1xx_HAL_Driver

  * @{

  */

/** @addtogroup RTC

  * @{

  */

/** @addtogroup RTC_Private_Macros

  * @{

  */

#define IS_RTC_ASYNCH_PREDIV(PREDIV)  (((PREDIV) <= 0xFFFFFU) || ((PREDIV) == RTC_AUTO_1_SECOND))

#define IS_RTC_HOUR24(HOUR)           ((HOUR) <= 23U)

#define IS_RTC_MINUTES(MINUTES)       ((MINUTES) <= 59U)

#define IS_RTC_SECONDS(SECONDS)       ((SECONDS) <= 59U)

#define IS_RTC_FORMAT(FORMAT)         (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))

#define IS_RTC_YEAR(YEAR)             ((YEAR) <= 99U)

#define IS_RTC_MONTH(MONTH)           (((MONTH) >= 1U) && ((MONTH) <= 12U))

#define IS_RTC_DATE(DATE)             (((DATE) >= 1U) && ((DATE) <= 31U))

#define IS_RTC_ALARM(ALARM)           ((ALARM) == RTC_ALARM_A)

#define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_OUTPUTSOURCE_NONE) || \

                                         ((__OUTPUT__) == RTC_OUTPUTSOURCE_CALIBCLOCK) || \

                                         ((__OUTPUT__) == RTC_OUTPUTSOURCE_ALARM) || \

                                         ((__OUTPUT__) == RTC_OUTPUTSOURCE_SECOND))

/**

  * @}

  */

/** @addtogroup RTC_Private_Constants

  * @{

  */

/** @defgroup RTC_Timeout_Value Default Timeout Value

  * @{

  */

#define RTC_TIMEOUT_VALUE           1000U

/**

  * @}

  */

/** @defgroup RTC_EXTI_Line_Event RTC EXTI Line event

  * @{

  */

#define RTC_EXTI_LINE_ALARM_EVENT   ((uint32_t)EXTI_IMR_MR17)  /*!< External interrupt line 17 Connected to the RTC Alarm event */

/**

  * @}

  */

/**

  * @}

  */

/* Exported types ------------------------------------------------------------*/

/** @defgroup RTC_Exported_Types RTC Exported Types

  * @{

  */

/**

  * @brief  RTC Time structure definition

  */

typedef struct

{

  uint8_t Hours;            /*!< Specifies the RTC Time Hour.

                                 This parameter must be a number between Min_Data = 0 and Max_Data = 23 */

  uint8_t Minutes;          /*!< Specifies the RTC Time Minutes.

                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */

  uint8_t Seconds;          /*!< Specifies the RTC Time Seconds.

                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */

} RTC_TimeTypeDef;

/**

  * @brief  RTC Alarm structure definition

  */

typedef struct

{

  RTC_TimeTypeDef AlarmTime;     /*!< Specifies the RTC Alarm Time members */

  uint32_t Alarm;                /*!< Specifies the alarm ID (only 1 alarm ID for STM32F1).

                                      This parameter can be a value of @ref RTC_Alarms_Definitions */

} RTC_AlarmTypeDef;

/**

  * @brief  HAL State structures definition

  */

typedef enum

{

  HAL_RTC_STATE_RESET             = 0x00U,  /*!< RTC not yet initialized or disabled */

  HAL_RTC_STATE_READY             = 0x01U,  /*!< RTC initialized and ready for use   */

  HAL_RTC_STATE_BUSY              = 0x02U,  /*!< RTC process is ongoing              */

  HAL_RTC_STATE_TIMEOUT           = 0x03U,  /*!< RTC timeout state                   */

  HAL_RTC_STATE_ERROR             = 0x04U   /*!< RTC error state                     */

} HAL_RTCStateTypeDef;

/**

  * @brief  RTC Configuration Structure definition

  */

typedef struct

{

  uint32_t AsynchPrediv;    /*!< Specifies the RTC Asynchronous Predivider value.

                                 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFFF  or RTC_AUTO_1_SECOND

                                 If RTC_AUTO_1_SECOND is selected, AsynchPrediv will be set automatically to get 1sec timebase */

  uint32_t OutPut;          /*!< Specifies which signal will be routed to the RTC Tamper pin.

                                 This parameter can be a value of @ref RTC_output_source_to_output_on_the_Tamper_pin */

} RTC_InitTypeDef;

/**

  * @brief  RTC Date structure definition

  */

typedef struct

{

  uint8_t WeekDay;  /*!< Specifies the RTC Date WeekDay (not necessary for HAL_RTC_SetDate).

                         This parameter can be a value of @ref RTC_WeekDay_Definitions */

  uint8_t Month;    /*!< Specifies the RTC Date Month (in BCD format).

                         This parameter can be a value of @ref RTC_Month_Date_Definitions */

  uint8_t Date;     /*!< Specifies the RTC Date.

                         This parameter must be a number between Min_Data = 1 and Max_Data = 31 */

  uint8_t Year;     /*!< Specifies the RTC Date Year.

                         This parameter must be a number between Min_Data = 0 and Max_Data = 99 */

} RTC_DateTypeDef;

/**

  * @brief  Time Handle Structure definition

  */

#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

typedef struct __RTC_HandleTypeDef

#else

typedef struct

#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */

{

  RTC_TypeDef                 *Instance;  /*!< Register base address    */

  RTC_InitTypeDef             Init;       /*!< RTC required parameters  */

  RTC_DateTypeDef             DateToUpdate;       /*!< Current date set by user and updated automatically  */

  HAL_LockTypeDef             Lock;       /*!< RTC locking object       */

  __IO HAL_RTCStateTypeDef    State;      /*!< Time communication state */

#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

  void (* AlarmAEventCallback)(struct __RTC_HandleTypeDef *hrtc);           /*!< RTC Alarm A Event callback         */

  void (* Tamper1EventCallback)(struct __RTC_HandleTypeDef *hrtc);          /*!< RTC Tamper 1 Event callback        */

  void (* MspInitCallback)(struct __RTC_HandleTypeDef *hrtc);               /*!< RTC Msp Init callback              */

  void (* MspDeInitCallback)(struct __RTC_HandleTypeDef *hrtc);             /*!< RTC Msp DeInit callback            */

#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */

} RTC_HandleTypeDef;

#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

/**

  * @brief  HAL RTC Callback ID enumeration definition

  */

typedef enum

{

  HAL_RTC_ALARM_A_EVENT_CB_ID           = 0x00u,    /*!< RTC Alarm A Event Callback ID       */

  HAL_RTC_TAMPER1_EVENT_CB_ID           = 0x04u,    /*!< RTC Tamper 1 Callback ID            */

  HAL_RTC_MSPINIT_CB_ID                 = 0x0Eu,    /*!< RTC Msp Init callback ID            */

  HAL_RTC_MSPDEINIT_CB_ID               = 0x0Fu     /*!< RTC Msp DeInit callback ID          */

} HAL_RTC_CallbackIDTypeDef;

/**

  * @brief  HAL RTC Callback pointer definition

  */

typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc);  /*!< pointer to an RTC callback function */

#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

/**

  * @}

  */

/* Exported constants --------------------------------------------------------*/

/** @defgroup RTC_Exported_Constants RTC Exported Constants

  * @{

  */

/** @defgroup RTC_Automatic_Prediv_1_Second Automatic calculation of prediv for 1sec timebase

  * @{

  */

#define RTC_AUTO_1_SECOND                      0xFFFFFFFFU

/**

  * @}

  */

/** @defgroup RTC_Input_parameter_format_definitions Input Parameter Format

  * @{

  */

#define RTC_FORMAT_BIN                         0x000000000U

#define RTC_FORMAT_BCD                         0x000000001U

/**

  * @}

  */

/** @defgroup RTC_Month_Date_Definitions Month Definitions

  * @{

  */

/* Coded in BCD format */

#define RTC_MONTH_JANUARY              ((uint8_t)0x01)

#define RTC_MONTH_FEBRUARY             ((uint8_t)0x02)

#define RTC_MONTH_MARCH                ((uint8_t)0x03)

#define RTC_MONTH_APRIL                ((uint8_t)0x04)

#define RTC_MONTH_MAY                  ((uint8_t)0x05)

#define RTC_MONTH_JUNE                 ((uint8_t)0x06)

#define RTC_MONTH_JULY                 ((uint8_t)0x07)

#define RTC_MONTH_AUGUST               ((uint8_t)0x08)

#define RTC_MONTH_SEPTEMBER            ((uint8_t)0x09)

#define RTC_MONTH_OCTOBER              ((uint8_t)0x10)

#define RTC_MONTH_NOVEMBER             ((uint8_t)0x11)

#define RTC_MONTH_DECEMBER             ((uint8_t)0x12)

/**

  * @}

  */

/** @defgroup RTC_WeekDay_Definitions WeekDay Definitions

  * @{

  */

#define RTC_WEEKDAY_MONDAY             ((uint8_t)0x01)

#define RTC_WEEKDAY_TUESDAY            ((uint8_t)0x02)

#define RTC_WEEKDAY_WEDNESDAY          ((uint8_t)0x03)

#define RTC_WEEKDAY_THURSDAY           ((uint8_t)0x04)

#define RTC_WEEKDAY_FRIDAY             ((uint8_t)0x05)

#define RTC_WEEKDAY_SATURDAY           ((uint8_t)0x06)

#define RTC_WEEKDAY_SUNDAY             ((uint8_t)0x00)

/**

  * @}

  */

/** @defgroup RTC_Alarms_Definitions Alarms Definitions

  * @{

  */

#define RTC_ALARM_A                        0U                                 /*!< Specify alarm ID (mainly for legacy purposes) */

/**

  * @}

  */

/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin Output source to output on the Tamper pin

  * @{

  */

#define RTC_OUTPUTSOURCE_NONE               0x00000000U                       /*!< No output on the TAMPER pin  */

#define RTC_OUTPUTSOURCE_CALIBCLOCK         BKP_RTCCR_CCO                     /*!< RTC clock with a frequency divided by 64 on the TAMPER pin  */

#define RTC_OUTPUTSOURCE_ALARM              BKP_RTCCR_ASOE                    /*!< Alarm pulse signal on the TAMPER pin  */

#define RTC_OUTPUTSOURCE_SECOND             (BKP_RTCCR_ASOS | BKP_RTCCR_ASOE) /*!< Second pulse signal on the TAMPER pin  */

/**

  * @}

  */

/** @defgroup RTC_Interrupts_Definitions Interrupts Definitions

  * @{

  */

#define RTC_IT_OW            RTC_CRH_OWIE       /*!< Overflow interrupt */

#define RTC_IT_ALRA          RTC_CRH_ALRIE      /*!< Alarm interrupt */

#define RTC_IT_SEC           RTC_CRH_SECIE      /*!< Second interrupt */

#define RTC_IT_TAMP1         BKP_CSR_TPIE       /*!< TAMPER Pin interrupt enable */

/**

  * @}

  */

/** @defgroup RTC_Flags_Definitions Flags Definitions

  * @{

  */

#define RTC_FLAG_RTOFF       RTC_CRL_RTOFF      /*!< RTC Operation OFF flag */

#define RTC_FLAG_RSF         RTC_CRL_RSF        /*!< Registers Synchronized flag */

#define RTC_FLAG_OW          RTC_CRL_OWF        /*!< Overflow flag */

#define RTC_FLAG_ALRAF       RTC_CRL_ALRF       /*!< Alarm flag */

#define RTC_FLAG_SEC         RTC_CRL_SECF       /*!< Second flag */

#define RTC_FLAG_TAMP1F      BKP_CSR_TEF        /*!< Tamper Interrupt Flag */

/**

  * @}

  */

/**

  * @}

  */

/* Exported macro ------------------------------------------------------------*/

/** @defgroup RTC_Exported_macros RTC Exported Macros

  * @{

  */

/** @brief  Reset RTC handle state

  * @param  __HANDLE__: RTC handle.

  * @retval None

  */

#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\

                                                      (__HANDLE__)->State = HAL_RTC_STATE_RESET;\

                                                      (__HANDLE__)->MspInitCallback = NULL;\

                                                      (__HANDLE__)->MspDeInitCallback = NULL;\

                                                     }while(0u)

#else

#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)

#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

/**

  * @brief  Disable the write protection for RTC registers.

  * @param  __HANDLE__: specifies the RTC handle.

  * @retval None

  */

#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__)         SET_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF)

/**

  * @brief  Enable the write protection for RTC registers.

  * @param  __HANDLE__: specifies the RTC handle.

  * @retval None

  */

#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__)          CLEAR_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF)

/**

  * @brief  Enable the RTC Alarm interrupt.

  * @param  __HANDLE__: specifies the RTC handle.

  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.

  *          This parameter can be any combination of the following values:

  *            @arg RTC_IT_ALRA: Alarm A interrupt

  * @retval None

  */

#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__)  SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))

/**

  * @brief  Disable the RTC Alarm interrupt.

  * @param  __HANDLE__: specifies the RTC handle.

  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.

  *         This parameter can be any combination of the following values:

  *            @arg RTC_IT_ALRA: Alarm A interrupt

  * @retval None

  */

#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))

/**

  * @brief  Check whether the specified RTC Alarm interrupt has been enabled or not.

  * @param  __HANDLE__: specifies the RTC handle.

  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be checked

  *         This parameter can be:

  *            @arg RTC_IT_ALRA: Alarm A interrupt

  * @retval None

  */

#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)

/**

  * @brief  Get the selected RTC Alarm's flag status.

  * @param  __HANDLE__: specifies the RTC handle.

  * @param  __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.

  *          This parameter can be:

  *            @arg RTC_FLAG_ALRAF

  * @retval None

  */

#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__)        (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)

/**

  * @brief  Check whether the specified RTC Alarm interrupt has occurred or not.

  * @param  __HANDLE__: specifies the RTC handle.

  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to check.

  *         This parameter can be:

  *            @arg RTC_IT_ALRA: Alarm A interrupt

  * @retval None

  */

#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__)        (((((__HANDLE__)->Instance->CRL) & (__INTERRUPT__)) != RESET)? SET : RESET)

/**

  * @brief  Clear the RTC Alarm's pending flags.

  * @param  __HANDLE__: specifies the RTC handle.

  * @param  __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.

  *         This parameter can be:

  *            @arg RTC_FLAG_ALRAF

  * @retval None

  */

#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)

/**

  * @brief Enable interrupt on ALARM Exti Line 17.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_ENABLE_IT()                  SET_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @brief Disable interrupt on ALARM Exti Line 17.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_DISABLE_IT()                 CLEAR_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @brief Enable event on ALARM Exti Line 17.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT()               SET_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @brief Disable event on ALARM Exti Line 17.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT()              CLEAR_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @brief  ALARM EXTI line configuration: set falling edge trigger.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE()        SET_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @brief Disable the ALARM Extended Interrupt Falling Trigger.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE()       CLEAR_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @brief  ALARM EXTI line configuration: set rising edge trigger.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE()         SET_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @brief Disable the ALARM Extended Interrupt Rising Trigger.

  * This parameter can be:

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE()        CLEAR_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @brief  ALARM EXTI line configuration: set rising & falling edge trigger.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE()      \

do{                                                            \

    __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();                 \

    __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();                \

  } while(0U)

/**

  * @brief Disable the ALARM Extended Interrupt Rising & Falling Trigger.

  * This parameter can be:

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE()      \

do{                                                             \

    __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();                 \

    __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();                \

  } while(0U)

/**

  * @brief Check whether the specified ALARM EXTI interrupt flag is set or not.

  * @retval EXTI ALARM Line Status.

  */

#define __HAL_RTC_ALARM_EXTI_GET_FLAG()                   (EXTI->PR & (RTC_EXTI_LINE_ALARM_EVENT))

/**

  * @brief Clear the ALARM EXTI flag.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()                 (EXTI->PR = (RTC_EXTI_LINE_ALARM_EVENT))

/**

  * @brief Generate a Software interrupt on selected EXTI line.

  * @retval None.

  */

#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()              SET_BIT(EXTI->SWIER, RTC_EXTI_LINE_ALARM_EVENT)

/**

  * @}

  */

/* Include RTC HAL Extension module */

#include "stm32f1xx_hal_rtc_ex.h"

/* Exported functions --------------------------------------------------------*/

/** @addtogroup RTC_Exported_Functions

  * @{

  */

/* Initialization and de-initialization functions  ****************************/

/** @addtogroup RTC_Exported_Functions_Group1

  * @{

  */

HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);

HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);

void              HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);

void              HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);

/* Callbacks Register/UnRegister functions  ***********************************/

#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback);

HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID);

#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

/**

  * @}

  */

/* RTC Time and Date functions ************************************************/

/** @addtogroup RTC_Exported_Functions_Group2

  * @{

  */

HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);

HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);

HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);

HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);

/**

  * @}

  */

/* RTC Alarm functions ********************************************************/

/** @addtogroup RTC_Exported_Functions_Group3

  * @{

  */

HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);

HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);

HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);

HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);

void              HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);

HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);

void              HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);

/**

  * @}

  */

/* Peripheral State functions *************************************************/

/** @addtogroup RTC_Exported_Functions_Group4

  * @{

  */

HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);

/**

  * @}

  */

/* Peripheral Control functions ***********************************************/

/** @addtogroup RTC_Exported_Functions_Group5

  * @{

  */

HAL_StatusTypeDef   HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc);

/**

  * @}

  */

/**

  * @}

  */

/**

  * @}

  */

/**

  * @}

  */

#ifdef __cplusplus

}

#endif

#endif /* __STM32F1xx_HAL_RTC_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/