WebSVN – dashGPS – Blame – /branches/dashGPS-bmp/Drivers/CMSIS/DSP/Source/TransformFunctions/arm_cfft_radix4_init_q15.c

Rev	Author	Line No.	Line
2	mjames	1	/* ----------------------------------------------------------------------
		2	* Project: CMSIS DSP Library
		3	* Title: arm_cfft_radix4_init_q15.c
		4	* Description: Radix-4 Decimation in Frequency Q15 FFT & IFFT initialization function
		5	*
		6	* $Date: 27. January 2017
		7	* $Revision: V.1.5.1
		8	*
		9	* Target Processor: Cortex-M cores
		10	* -------------------------------------------------------------------- */
		11	/*
		12	* Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
		13	*
		14	* SPDX-License-Identifier: Apache-2.0
		15	*
		16	* Licensed under the Apache License, Version 2.0 (the License); you may
		17	* not use this file except in compliance with the License.
		18	* You may obtain a copy of the License at
		19	*
		20	* www.apache.org/licenses/LICENSE-2.0
		21	*
		22	* Unless required by applicable law or agreed to in writing, software
		23	* distributed under the License is distributed on an AS IS BASIS, WITHOUT
		24	* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
		25	* See the License for the specific language governing permissions and
		26	* limitations under the License.
		27	*/
		28
		29	#include "arm_math.h"
		30	#include "arm_common_tables.h"
		31
		32	/**
		33	* @ingroup groupTransforms
		34	*/
		35
		36
		37	/**
		38	* @addtogroup ComplexFFT
		39	* @{
		40	*/
		41
		42
		43	/**
		44	* @brief Initialization function for the Q15 CFFT/CIFFT.
		45	* @deprecated Do not use this function. It has been superseded by \ref arm_cfft_q15 and will be removed
		46	* @param[in,out] *S points to an instance of the Q15 CFFT/CIFFT structure.
		47	* @param[in] fftLen length of the FFT.
		48	* @param[in] ifftFlag flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform.
		49	* @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output.
		50	* @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLen</code> is not a supported value.
		51	*
		52	* \par Description:
		53	* \par
		54	* The parameter <code>ifftFlag</code> controls whether a forward or inverse transform is computed.
		55	* Set(=1) ifftFlag for calculation of CIFFT otherwise CFFT is calculated
		56	* \par
		57	* The parameter <code>bitReverseFlag</code> controls whether output is in normal order or bit reversed order.
		58	* Set(=1) bitReverseFlag for output to be in normal order otherwise output is in bit reversed order.
		59	* \par
		60	* The parameter <code>fftLen</code> Specifies length of CFFT/CIFFT process. Supported FFT Lengths are 16, 64, 256, 1024.
		61	* \par
		62	* This Function also initializes Twiddle factor table pointer and Bit reversal table pointer.
		63	*/
		64
		65	arm_status arm_cfft_radix4_init_q15(
		66	arm_cfft_radix4_instance_q15 * S,
		67	uint16_t fftLen,
		68	uint8_t ifftFlag,
		69	uint8_t bitReverseFlag)
		70	{
		71	/* Initialise the default arm status */
		72	arm_status status = ARM_MATH_SUCCESS;
		73	/* Initialise the FFT length */
		74	S->fftLen = fftLen;
		75	/* Initialise the Twiddle coefficient pointer */
		76	S->pTwiddle = (q15_t *) twiddleCoef_4096_q15;
		77	/* Initialise the Flag for selection of CFFT or CIFFT */
		78	S->ifftFlag = ifftFlag;
		79	/* Initialise the Flag for calculation Bit reversal or not */
		80	S->bitReverseFlag = bitReverseFlag;
		81
		82	/* Initializations of structure parameters depending on the FFT length */
		83	switch (S->fftLen)
		84	{
		85	case 4096U:
		86	/* Initializations of structure parameters for 4096 point FFT */
		87
		88	/* Initialise the twiddle coef modifier value */
		89	S->twidCoefModifier = 1U;
		90	/* Initialise the bit reversal table modifier */
		91	S->bitRevFactor = 1U;
		92	/* Initialise the bit reversal table pointer */
		93	S->pBitRevTable = (uint16_t *) armBitRevTable;
		94
		95	break;
		96
		97	case 1024U:
		98	/* Initializations of structure parameters for 1024 point FFT */
		99	S->twidCoefModifier = 4U;
		100	S->bitRevFactor = 4U;
		101	S->pBitRevTable = (uint16_t *) & armBitRevTable[3];
		102
		103	break;
		104
		105	case 256U:
		106	/* Initializations of structure parameters for 256 point FFT */
		107	S->twidCoefModifier = 16U;
		108	S->bitRevFactor = 16U;
		109	S->pBitRevTable = (uint16_t *) & armBitRevTable[15];
		110
		111	break;
		112
		113	case 64U:
		114	/* Initializations of structure parameters for 64 point FFT */
		115	S->twidCoefModifier = 64U;
		116	S->bitRevFactor = 64U;
		117	S->pBitRevTable = (uint16_t *) & armBitRevTable[63];
		118
		119	break;
		120
		121	case 16U:
		122	/* Initializations of structure parameters for 16 point FFT */
		123	S->twidCoefModifier = 256U;
		124	S->bitRevFactor = 256U;
		125	S->pBitRevTable = (uint16_t *) & armBitRevTable[255];
		126
		127	break;
		128
		129	default:
		130	/* Reporting argument error if fftSize is not valid value */
		131	status = ARM_MATH_ARGUMENT_ERROR;
		132	break;
		133	}
		134
		135	return (status);
		136	}
		137
		138	/**
		139	* @} end of ComplexFFT group
		140	*/

Subversion Repositories dashGPS

(root)/branches/dashGPS-bmp/Drivers/CMSIS/DSP/Source/TransformFunctions/arm_cfft_radix4_init_q15.c – Rev 18