WebSVN – DashDisplay – Blame – /branches/Dashboard_L152_v2/Drivers/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim.c

Rev	Author	Line No.	Line
30	mjames	1	/**
		2	******************************************************************************
		3	* @file stm32l1xx_hal_tim.c
		4	* @author MCD Application Team
		5	* @version V1.2.0
		6	* @date 01-July-2016
		7	* @brief TIM HAL module driver
		8	* This file provides firmware functions to manage the following
		9	* functionalities of the Timer (TIM) peripheral:
		10	* + Time Base Initialization
		11	* + Time Base Start
		12	* + Time Base Start Interruption
		13	* + Time Base Start DMA
		14	* + Time Output Compare/PWM Initialization
		15	* + Time Output Compare/PWM Channel Configuration
		16	* + Time Output Compare/PWM Start
		17	* + Time Output Compare/PWM Start Interruption
		18	* + Time Output Compare/PWM Start DMA
		19	* + Time Input Capture Initialization
		20	* + Time Input Capture Channel Configuration
		21	* + Time Input Capture Start
		22	* + Time Input Capture Start Interruption
		23	* + Time Input Capture Start DMA
		24	* + Time One Pulse Initialization
		25	* + Time One Pulse Channel Configuration
		26	* + Time One Pulse Start
		27	* + Time Encoder Interface Initialization
		28	* + Time Encoder Interface Start
		29	* + Time Encoder Interface Start Interruption
		30	* + Time Encoder Interface Start DMA
		31	* + Commutation Event configuration with Interruption and DMA
		32	* + Time OCRef clear configuration
		33	* + Time External Clock configuration
		34	* + Time Master and Slave synchronization configuration
		35	@verbatim
		36	==============================================================================
		37	##### TIMER Generic features #####
		38	==============================================================================
		39	[..] The Timer features include:
		40	(#) 16-bit up, down, up/down auto-reload counter.
		41	(#) 16-bit programmable prescaler allowing dividing (also on the fly) the
		42	counter clock frequency either by any factor between 1 and 65536.
		43	(#) Up to 4 independent channels for:
		44	(++) Input Capture
		45	(++) Output Compare
		46	(++) PWM generation (Edge and Center-aligned Mode)
		47	(++) One-pulse mode output
		48	(#) Synchronization circuit to control the timer with external signals and to interconnect
		49	several timers together.
		50	(#) Supports incremental (quadrature) encoder
		51
		52	##### How to use this driver #####
		53	================================================================================
		54	[..]
		55	(#) Initialize the TIM low level resources by implementing the following functions
		56	depending from feature used :
		57	(++) Time Base : HAL_TIM_Base_MspInit()
		58	(++) Input Capture : HAL_TIM_IC_MspInit()
		59	(++) Output Compare : HAL_TIM_OC_MspInit()
		60	(++) PWM generation : HAL_TIM_PWM_MspInit()
		61	(++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
		62	(++) Encoder mode output : HAL_TIM_Encoder_MspInit()
		63
		64	(#) Initialize the TIM low level resources :
		65	(##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
		66	(##) TIM pins configuration
		67	(+++) Enable the clock for the TIM GPIOs using the following function:
		68	__HAL_RCC_GPIOx_CLK_ENABLE();
		69	(+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
		70
		71	(#) The external Clock can be configured, if needed (the default clock is the
		72	internal clock from the APBx), using the following function:
		73	HAL_TIM_ConfigClockSource, the clock configuration should be done before
		74	any start function.
		75
		76	(#) Configure the TIM in the desired functioning mode using one of the
		77	Initialization function of this driver:
		78	(++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
		79	(++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
		80	Output Compare signal.
		81	(++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
		82	PWM signal.
		83	(++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
		84	external signal.
		85	(++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
		86	in One Pulse Mode.
		87	(++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
		88
		89	(#) Activate the TIM peripheral using one of the start functions depending from the feature used:
		90	(++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
		91	(++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
		92	(++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
		93	(++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
		94	(++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
		95	(++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
		96
		97	(#) The DMA Burst is managed with the two following functions:
		98	HAL_TIM_DMABurst_WriteStart()
		99	HAL_TIM_DMABurst_ReadStart()
		100
		101	@endverbatim
		102	******************************************************************************
		103	* @attention
		104	*
		105	* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
		106	*
		107	* Redistribution and use in source and binary forms, with or without modification,
		108	* are permitted provided that the following conditions are met:
		109	* 1. Redistributions of source code must retain the above copyright notice,
		110	* this list of conditions and the following disclaimer.
		111	* 2. Redistributions in binary form must reproduce the above copyright notice,
		112	* this list of conditions and the following disclaimer in the documentation
		113	* and/or other materials provided with the distribution.
		114	* 3. Neither the name of STMicroelectronics nor the names of its contributors
		115	* may be used to endorse or promote products derived from this software
		116	* without specific prior written permission.
		117	*
		118	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
		119	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
		120	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
		121	* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
		122	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
		123	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
		124	* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
		125	* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
		126	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
		127	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		128	*
		129	******************************************************************************
		130	*/
		131
		132	/* Includes ------------------------------------------------------------------*/
		133	#include "stm32l1xx_hal.h"
		134
		135	/** @addtogroup STM32L1xx_HAL_Driver
		136	* @{
		137	*/
		138
		139	/** @defgroup TIM TIM
		140	* @brief TIM HAL module driver
		141	* @{
		142	*/
		143
		144	#ifdef HAL_TIM_MODULE_ENABLED
		145
		146	/* Private typedef -----------------------------------------------------------*/
		147	/* Private define ------------------------------------------------------------*/
		148	/* Private macro -------------------------------------------------------------*/
		149	/* Private variables ---------------------------------------------------------*/
		150	/* Private function prototypes -----------------------------------------------*/
		151	/** @defgroup TIM_Private_Functions TIM Private Functions
		152	* @{
		153	*/
		154	static void TIM_Base_SetConfig(TIM_TypeDef TIMx, TIM_Base_InitTypeDef Structure);
		155	static void TIM_OC1_SetConfig(TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config);
		156	static void TIM_OC2_SetConfig(TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config);
		157	static void TIM_OC3_SetConfig(TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config);
		158	static void TIM_OC4_SetConfig(TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config);
		159	static void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
		160	static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
		161	static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
		162	static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
		163	static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
		164	static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
		165	static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
		166	static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t InputTriggerSource);
		167	static void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
		168	static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
		169	static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
		170	static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef htim, TIM_SlaveConfigTypeDef sSlaveConfig);
		171
		172	/**
		173	* @}
		174	*/
		175
		176	/* Exported functions ---------------------------------------------------------*/
		177
		178	/** @defgroup TIM_Exported_Functions TIM Exported Functions
		179	* @{
		180	*/
		181
		182	/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
		183	* @brief Time Base functions
		184	*
		185	@verbatim
		186	==============================================================================
		187	##### Time Base functions #####
		188	==============================================================================
		189	[..]
		190	This section provides functions allowing to:
		191	(+) Initialize and configure the TIM base.
		192	(+) De-initialize the TIM base.
		193	(+) Start the Time Base.
		194	(+) Stop the Time Base.
		195	(+) Start the Time Base and enable interrupt.
		196	(+) Stop the Time Base and disable interrupt.
		197	(+) Start the Time Base and enable DMA transfer.
		198	(+) Stop the Time Base and disable DMA transfer.
		199
		200	@endverbatim
		201	* @{
		202	*/
		203	/**
		204	* @brief Initializes the TIM Time base Unit according to the specified
		205	* parameters in the TIM_HandleTypeDef and create the associated handle.
		206	* @param htim: TIM Base handle
		207	* @retval HAL status
		208	*/
		209	HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
		210	{
		211	/* Check the TIM handle allocation */
		212	if(htim == NULL)
		213	{
		214	return HAL_ERROR;
		215	}
		216
		217	/* Check the parameters */
		218	assert_param(IS_TIM_INSTANCE(htim->Instance));
		219	assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
		220	assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
		221
		222	if(htim->State == HAL_TIM_STATE_RESET)
		223	{
		224	/* Allocate lock resource and initialize it */
		225	htim->Lock = HAL_UNLOCKED;
		226
		227	/* Init the low level hardware : GPIO, CLOCK, NVIC */
		228	HAL_TIM_Base_MspInit(htim);
		229	}
		230
		231	/* Set the TIM state */
		232	htim->State= HAL_TIM_STATE_BUSY;
		233
		234	/* Set the Time Base configuration */
		235	TIM_Base_SetConfig(htim->Instance, &htim->Init);
		236
		237	/* Initialize the TIM state*/
		238	htim->State= HAL_TIM_STATE_READY;
		239
		240	return HAL_OK;
		241	}
		242
		243	/**
		244	* @brief DeInitializes the TIM Base peripheral
		245	* @param htim: TIM Base handle
		246	* @retval HAL status
		247	*/
		248	HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
		249	{
		250	/* Check the parameters */
		251	assert_param(IS_TIM_INSTANCE(htim->Instance));
		252
		253	htim->State = HAL_TIM_STATE_BUSY;
		254
		255	/* Disable the TIM Peripheral Clock */
		256	__HAL_TIM_DISABLE(htim);
		257
		258	/* DeInit the low level hardware: GPIO, CLOCK, NVIC */
		259	HAL_TIM_Base_MspDeInit(htim);
		260
		261	/* Change TIM state */
		262	htim->State = HAL_TIM_STATE_RESET;
		263
		264	/* Release Lock */
		265	__HAL_UNLOCK(htim);
		266
		267	return HAL_OK;
		268	}
		269
		270	/**
		271	* @brief Initializes the TIM Base MSP.
		272	* @param htim: TIM handle
		273	* @retval None
		274	*/
		275	__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
		276	{
		277	/* Prevent unused argument(s) compilation warning */
		278	UNUSED(htim);
		279
		280	/* NOTE : This function Should not be modified, when the callback is needed,
		281	the HAL_TIM_Base_MspInit could be implemented in the user file
		282	*/
		283	}
		284
		285	/**
		286	* @brief DeInitializes TIM Base MSP.
		287	* @param htim: TIM handle
		288	* @retval None
		289	*/
		290	__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
		291	{
		292	/* Prevent unused argument(s) compilation warning */
		293	UNUSED(htim);
		294
		295	/* NOTE : This function Should not be modified, when the callback is needed,
		296	the HAL_TIM_Base_MspDeInit could be implemented in the user file
		297	*/
		298	}
		299
		300
		301	/**
		302	* @brief Starts the TIM Base generation.
		303	* @param htim : TIM handle
		304	* @retval HAL status
		305	*/
		306	HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
		307	{
		308	/* Check the parameters */
		309	assert_param(IS_TIM_INSTANCE(htim->Instance));
		310
		311	/* Set the TIM state */
		312	htim->State= HAL_TIM_STATE_BUSY;
		313
		314	/* Enable the Peripheral */
		315	__HAL_TIM_ENABLE(htim);
		316
		317	/* Change the TIM state*/
		318	htim->State= HAL_TIM_STATE_READY;
		319
		320	/* Return function status */
		321	return HAL_OK;
		322	}
		323
		324	/**
		325	* @brief Stops the TIM Base generation.
		326	* @param htim : TIM handle
		327	* @retval HAL status
		328	*/
		329	HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
		330	{
		331	/* Check the parameters */
		332	assert_param(IS_TIM_INSTANCE(htim->Instance));
		333
		334	/* Set the TIM state */
		335	htim->State= HAL_TIM_STATE_BUSY;
		336
		337	/* Disable the Peripheral */
		338	__HAL_TIM_DISABLE(htim);
		339
		340	/* Change the TIM state*/
		341	htim->State= HAL_TIM_STATE_READY;
		342
		343	/* Return function status */
		344	return HAL_OK;
		345	}
		346
		347	/**
		348	* @brief Starts the TIM Base generation in interrupt mode.
		349	* @param htim : TIM handle
		350	* @retval HAL status
		351	*/
		352	HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
		353	{
		354	/* Check the parameters */
		355	assert_param(IS_TIM_INSTANCE(htim->Instance));
		356
		357	/* Enable the TIM Update interrupt */
		358	__HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
		359
		360	/* Enable the Peripheral */
		361	__HAL_TIM_ENABLE(htim);
		362
		363	/* Return function status */
		364	return HAL_OK;
		365	}
		366
		367	/**
		368	* @brief Stops the TIM Base generation in interrupt mode.
		369	* @param htim : TIM handle
		370	* @retval HAL status
		371	*/
		372	HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
		373	{
		374	/* Check the parameters */
		375	assert_param(IS_TIM_INSTANCE(htim->Instance));
		376	/* Disable the TIM Update interrupt */
		377	__HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
		378
		379	/* Disable the Peripheral */
		380	__HAL_TIM_DISABLE(htim);
		381
		382	/* Return function status */
		383	return HAL_OK;
		384	}
		385
		386	/**
		387	* @brief Starts the TIM Base generation in DMA mode.
		388	* @param htim : TIM handle
		389	* @param pData: The source Buffer address.
		390	* @param Length: The length of data to be transferred from memory to peripheral.
		391	* @retval HAL status
		392	*/
		393	HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef htim, uint32_t pData, uint16_t Length)
		394	{
		395	/* Check the parameters */
		396	assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
		397
		398	if((htim->State == HAL_TIM_STATE_BUSY))
		399	{
		400	return HAL_BUSY;
		401	}
		402	else if((htim->State == HAL_TIM_STATE_READY))
		403	{
		404	if((pData == 0 ) && (Length > 0))
		405	{
		406	return HAL_ERROR;
		407	}
		408	else
		409	{
		410	htim->State = HAL_TIM_STATE_BUSY;
		411	}
		412	}
		413	else
		414	{
		415	return HAL_ERROR;
		416	}
		417
		418	/* Set the DMA Period elapsed callback */
		419	htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
		420
		421	/* Set the DMA error callback */
		422	htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
		423
		424	/* Enable the DMA channel */
		425	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
		426
		427	/* Enable the TIM Update DMA request */
		428	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
		429
		430	/* Enable the Peripheral */
		431	__HAL_TIM_ENABLE(htim);
		432
		433	/* Return function status */
		434	return HAL_OK;
		435	}
		436
		437	/**
		438	* @brief Stops the TIM Base generation in DMA mode.
		439	* @param htim : TIM handle
		440	* @retval HAL status
		441	*/
		442	HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
		443	{
		444	/* Check the parameters */
		445	assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
		446
		447	/* Disable the TIM Update DMA request */
		448	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
		449
		450	/* Disable the Peripheral */
		451	__HAL_TIM_DISABLE(htim);
		452
		453	/* Change the htim state */
		454	htim->State = HAL_TIM_STATE_READY;
		455
		456	/* Return function status */
		457	return HAL_OK;
		458	}
		459
		460	/**
		461	* @}
		462	*/
		463
		464	/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
		465	* @brief Time Output Compare functions
		466	*
		467	@verbatim
		468	==============================================================================
		469	##### Time Output Compare functions #####
		470	==============================================================================
		471	[..]
		472	This section provides functions allowing to:
		473	(+) Initialize and configure the TIM Output Compare.
		474	(+) De-initialize the TIM Output Compare.
		475	(+) Start the Time Output Compare.
		476	(+) Stop the Time Output Compare.
		477	(+) Start the Time Output Compare and enable interrupt.
		478	(+) Stop the Time Output Compare and disable interrupt.
		479	(+) Start the Time Output Compare and enable DMA transfer.
		480	(+) Stop the Time Output Compare and disable DMA transfer.
		481
		482	@endverbatim
		483	* @{
		484	*/
		485	/**
		486	* @brief Initializes the TIM Output Compare according to the specified
		487	* parameters in the TIM_HandleTypeDef and create the associated handle.
		488	* @param htim: TIM Output Compare handle
		489	* @retval HAL status
		490	*/
		491	HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
		492	{
		493	/* Check the TIM handle allocation */
		494	if(htim == NULL)
		495	{
		496	return HAL_ERROR;
		497	}
		498
		499	/* Check the parameters */
		500	assert_param(IS_TIM_INSTANCE(htim->Instance));
		501	assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
		502	assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
		503
		504	if(htim->State == HAL_TIM_STATE_RESET)
		505	{
		506	/* Allocate lock resource and initialize it */
		507	htim->Lock = HAL_UNLOCKED;
		508
		509	/* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
		510	HAL_TIM_OC_MspInit(htim);
		511	}
		512
		513	/* Set the TIM state */
		514	htim->State= HAL_TIM_STATE_BUSY;
		515
		516	/* Init the base time for the Output Compare */
		517	TIM_Base_SetConfig(htim->Instance, &htim->Init);
		518
		519	/* Initialize the TIM state*/
		520	htim->State= HAL_TIM_STATE_READY;
		521
		522	return HAL_OK;
		523	}
		524
		525	/**
		526	* @brief DeInitializes the TIM peripheral
		527	* @param htim: TIM Output Compare handle
		528	* @retval HAL status
		529	*/
		530	HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
		531	{
		532	/* Check the parameters */
		533	assert_param(IS_TIM_INSTANCE(htim->Instance));
		534
		535	htim->State = HAL_TIM_STATE_BUSY;
		536
		537	/* Disable the TIM Peripheral Clock */
		538	__HAL_TIM_DISABLE(htim);
		539
		540	/* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
		541	HAL_TIM_OC_MspDeInit(htim);
		542
		543	/* Change TIM state */
		544	htim->State = HAL_TIM_STATE_RESET;
		545
		546	/* Release Lock */
		547	__HAL_UNLOCK(htim);
		548
		549	return HAL_OK;
		550	}
		551
		552	/**
		553	* @brief Initializes the TIM Output Compare MSP.
		554	* @param htim: TIM handle
		555	* @retval None
		556	*/
		557	__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
		558	{
		559	/* Prevent unused argument(s) compilation warning */
		560	UNUSED(htim);
		561
		562	/* NOTE : This function Should not be modified, when the callback is needed,
		563	the HAL_TIM_OC_MspInit could be implemented in the user file
		564	*/
		565	}
		566
		567	/**
		568	* @brief DeInitializes TIM Output Compare MSP.
		569	* @param htim: TIM handle
		570	* @retval None
		571	*/
		572	__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
		573	{
		574	/* Prevent unused argument(s) compilation warning */
		575	UNUSED(htim);
		576
		577	/* NOTE : This function Should not be modified, when the callback is needed,
		578	the HAL_TIM_OC_MspDeInit could be implemented in the user file
		579	*/
		580	}
		581
		582	/**
		583	* @brief Starts the TIM Output Compare signal generation.
		584	* @param htim : TIM Output Compare handle
		585	* @param Channel : TIM Channel to be enabled
		586	* This parameter can be one of the following values:
		587	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		588	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		589	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		590	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		591	* @retval HAL status
		592	*/
		593	HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
		594	{
		595	/* Check the parameters */
		596	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		597
		598	/* Enable the Output compare channel */
		599	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		600
		601	/* Enable the Peripheral */
		602	__HAL_TIM_ENABLE(htim);
		603
		604	/* Return function status */
		605	return HAL_OK;
		606	}
		607
		608	/**
		609	* @brief Stops the TIM Output Compare signal generation.
		610	* @param htim : TIM handle
		611	* @param Channel : TIM Channel to be disabled
		612	* This parameter can be one of the following values:
		613	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		614	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		615	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		616	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		617	* @retval HAL status
		618	*/
		619	HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
		620	{
		621	/* Check the parameters */
		622	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		623
		624	/* Disable the Output compare channel */
		625	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		626
		627	/* Disable the Peripheral */
		628	__HAL_TIM_DISABLE(htim);
		629
		630	/* Return function status */
		631	return HAL_OK;
		632	}
		633
		634	/**
		635	* @brief Starts the TIM Output Compare signal generation in interrupt mode.
		636	* @param htim : TIM OC handle
		637	* @param Channel : TIM Channel to be enabled
		638	* This parameter can be one of the following values:
		639	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		640	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		641	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		642	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		643	* @retval HAL status
		644	*/
		645	HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
		646	{
		647	/* Check the parameters */
		648	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		649
		650	switch (Channel)
		651	{
		652	case TIM_CHANNEL_1:
		653	{
		654	/* Enable the TIM Capture/Compare 1 interrupt */
		655	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
		656	}
		657	break;
		658
		659	case TIM_CHANNEL_2:
		660	{
		661	/* Enable the TIM Capture/Compare 2 interrupt */
		662	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
		663	}
		664	break;
		665
		666	case TIM_CHANNEL_3:
		667	{
		668	/* Enable the TIM Capture/Compare 3 interrupt */
		669	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
		670	}
		671	break;
		672
		673	case TIM_CHANNEL_4:
		674	{
		675	/* Enable the TIM Capture/Compare 4 interrupt */
		676	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
		677	}
		678	break;
		679
		680	default:
		681	break;
		682	}
		683
		684	/* Enable the Output compare channel */
		685	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		686
		687	/* Enable the Peripheral */
		688	__HAL_TIM_ENABLE(htim);
		689
		690	/* Return function status */
		691	return HAL_OK;
		692	}
		693
		694	/**
		695	* @brief Stops the TIM Output Compare signal generation in interrupt mode.
		696	* @param htim : TIM Output Compare handle
		697	* @param Channel : TIM Channel to be disabled
		698	* This parameter can be one of the following values:
		699	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		700	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		701	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		702	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		703	* @retval HAL status
		704	*/
		705	HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
		706	{
		707	/* Check the parameters */
		708	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		709
		710	switch (Channel)
		711	{
		712	case TIM_CHANNEL_1:
		713	{
		714	/* Disable the TIM Capture/Compare 1 interrupt */
		715	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
		716	}
		717	break;
		718
		719	case TIM_CHANNEL_2:
		720	{
		721	/* Disable the TIM Capture/Compare 2 interrupt */
		722	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
		723	}
		724	break;
		725
		726	case TIM_CHANNEL_3:
		727	{
		728	/* Disable the TIM Capture/Compare 3 interrupt */
		729	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
		730	}
		731	break;
		732
		733	case TIM_CHANNEL_4:
		734	{
		735	/* Disable the TIM Capture/Compare 4 interrupt */
		736	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
		737	}
		738	break;
		739
		740	default:
		741	break;
		742	}
		743
		744	/* Disable the Output compare channel */
		745	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		746
		747	/* Disable the Peripheral */
		748	__HAL_TIM_DISABLE(htim);
		749
		750	/* Return function status */
		751	return HAL_OK;
		752	}
		753
		754	/**
		755	* @brief Starts the TIM Output Compare signal generation in DMA mode.
		756	* @param htim : TIM Output Compare handle
		757	* @param Channel : TIM Channel to be enabled
		758	* This parameter can be one of the following values:
		759	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		760	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		761	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		762	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		763	* @param pData: The source Buffer address.
		764	* @param Length: The length of data to be transferred from memory to TIM peripheral
		765	* @retval HAL status
		766	*/
		767	HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
		768	{
		769	/* Check the parameters */
		770	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		771
		772	if((htim->State == HAL_TIM_STATE_BUSY))
		773	{
		774	return HAL_BUSY;
		775	}
		776	else if((htim->State == HAL_TIM_STATE_READY))
		777	{
		778	if(((uint32_t)pData == 0 ) && (Length > 0))
		779	{
		780	return HAL_ERROR;
		781	}
		782	else
		783	{
		784	htim->State = HAL_TIM_STATE_BUSY;
		785	}
		786	}
		787	else
		788	{
		789	return HAL_ERROR;
		790	}
		791
		792	switch (Channel)
		793	{
		794	case TIM_CHANNEL_1:
		795	{
		796	/* Set the DMA Period elapsed callback */
		797	htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
		798
		799	/* Set the DMA error callback */
		800	htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
		801
		802	/* Enable the DMA channel */
		803	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
		804
		805	/* Enable the TIM Capture/Compare 1 DMA request */
		806	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
		807	}
		808	break;
		809
		810	case TIM_CHANNEL_2:
		811	{
		812	/* Set the DMA Period elapsed callback */
		813	htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
		814
		815	/* Set the DMA error callback */
		816	htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
		817
		818	/* Enable the DMA channel */
		819	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
		820
		821	/* Enable the TIM Capture/Compare 2 DMA request */
		822	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
		823	}
		824	break;
		825
		826	case TIM_CHANNEL_3:
		827	{
		828	/* Set the DMA Period elapsed callback */
		829	htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
		830
		831	/* Set the DMA error callback */
		832	htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
		833
		834	/* Enable the DMA channel */
		835	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
		836
		837	/* Enable the TIM Capture/Compare 3 DMA request */
		838	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
		839	}
		840	break;
		841
		842	case TIM_CHANNEL_4:
		843	{
		844	/* Set the DMA Period elapsed callback */
		845	htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
		846
		847	/* Set the DMA error callback */
		848	htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
		849
		850	/* Enable the DMA channel */
		851	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
		852
		853	/* Enable the TIM Capture/Compare 4 DMA request */
		854	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
		855	}
		856	break;
		857
		858	default:
		859	break;
		860	}
		861
		862	/* Enable the Output compare channel */
		863	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		864
		865	/* Enable the Peripheral */
		866	__HAL_TIM_ENABLE(htim);
		867
		868	/* Return function status */
		869	return HAL_OK;
		870	}
		871
		872	/**
		873	* @brief Stops the TIM Output Compare signal generation in DMA mode.
		874	* @param htim : TIM Output Compare handle
		875	* @param Channel : TIM Channel to be disabled
		876	* This parameter can be one of the following values:
		877	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		878	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		879	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		880	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		881	* @retval HAL status
		882	*/
		883	HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
		884	{
		885	/* Check the parameters */
		886	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		887
		888	switch (Channel)
		889	{
		890	case TIM_CHANNEL_1:
		891	{
		892	/* Disable the TIM Capture/Compare 1 DMA request */
		893	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
		894	}
		895	break;
		896
		897	case TIM_CHANNEL_2:
		898	{
		899	/* Disable the TIM Capture/Compare 2 DMA request */
		900	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
		901	}
		902	break;
		903
		904	case TIM_CHANNEL_3:
		905	{
		906	/* Disable the TIM Capture/Compare 3 DMA request */
		907	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
		908	}
		909	break;
		910
		911	case TIM_CHANNEL_4:
		912	{
		913	/* Disable the TIM Capture/Compare 4 interrupt */
		914	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
		915	}
		916	break;
		917
		918	default:
		919	break;
		920	}
		921
		922	/* Disable the Output compare channel */
		923	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		924
		925	/* Disable the Peripheral */
		926	__HAL_TIM_DISABLE(htim);
		927
		928	/* Change the htim state */
		929	htim->State = HAL_TIM_STATE_READY;
		930
		931	/* Return function status */
		932	return HAL_OK;
		933	}
		934
		935	/**
		936	* @}
		937	*/
		938
		939	/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
		940	* @brief Time PWM functions
		941	*
		942	@verbatim
		943	==============================================================================
		944	##### Time PWM functions #####
		945	==============================================================================
		946	[..]
		947	This section provides functions allowing to:
		948	(+) Initialize and configure the TIM PWM.
		949	(+) De-initialize the TIM PWM.
		950	(+) Start the Time PWM.
		951	(+) Stop the Time PWM.
		952	(+) Start the Time PWM and enable interrupt.
		953	(+) Stop the Time PWM and disable interrupt.
		954	(+) Start the Time PWM and enable DMA transfer.
		955	(+) Stop the Time PWM and disable DMA transfer.
		956
		957	@endverbatim
		958	* @{
		959	*/
		960	/**
		961	* @brief Initializes the TIM PWM Time Base according to the specified
		962	* parameters in the TIM_HandleTypeDef and create the associated handle.
		963	* @param htim: TIM handle
		964	* @retval HAL status
		965	*/
		966	HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
		967	{
		968	/* Check the TIM handle allocation */
		969	if(htim == NULL)
		970	{
		971	return HAL_ERROR;
		972	}
		973
		974	/* Check the parameters */
		975	assert_param(IS_TIM_INSTANCE(htim->Instance));
		976	assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
		977	assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
		978
		979	if(htim->State == HAL_TIM_STATE_RESET)
		980	{
		981	/* Allocate lock resource and initialize it */
		982	htim->Lock = HAL_UNLOCKED;
		983
		984	/* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
		985	HAL_TIM_PWM_MspInit(htim);
		986	}
		987
		988	/* Set the TIM state */
		989	htim->State= HAL_TIM_STATE_BUSY;
		990
		991	/* Init the base time for the PWM */
		992	TIM_Base_SetConfig(htim->Instance, &htim->Init);
		993
		994	/* Initialize the TIM state*/
		995	htim->State= HAL_TIM_STATE_READY;
		996
		997	return HAL_OK;
		998	}
		999
		1000	/**
		1001	* @brief DeInitializes the TIM peripheral
		1002	* @param htim: TIM handle
		1003	* @retval HAL status
		1004	*/
		1005	HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
		1006	{
		1007	/* Check the parameters */
		1008	assert_param(IS_TIM_INSTANCE(htim->Instance));
		1009
		1010	htim->State = HAL_TIM_STATE_BUSY;
		1011
		1012	/* Disable the TIM Peripheral Clock */
		1013	__HAL_TIM_DISABLE(htim);
		1014
		1015	/* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
		1016	HAL_TIM_PWM_MspDeInit(htim);
		1017
		1018	/* Change TIM state */
		1019	htim->State = HAL_TIM_STATE_RESET;
		1020
		1021	/* Release Lock */
		1022	__HAL_UNLOCK(htim);
		1023
		1024	return HAL_OK;
		1025	}
		1026
		1027	/**
		1028	* @brief Initializes the TIM PWM MSP.
		1029	* @param htim: TIM handle
		1030	* @retval None
		1031	*/
		1032	__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
		1033	{
		1034	/* Prevent unused argument(s) compilation warning */
		1035	UNUSED(htim);
		1036
		1037	/* NOTE : This function Should not be modified, when the callback is needed,
		1038	the HAL_TIM_PWM_MspInit could be implemented in the user file
		1039	*/
		1040	}
		1041
		1042	/**
		1043	* @brief DeInitializes TIM PWM MSP.
		1044	* @param htim: TIM handle
		1045	* @retval None
		1046	*/
		1047	__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
		1048	{
		1049	/* Prevent unused argument(s) compilation warning */
		1050	UNUSED(htim);
		1051
		1052	/* NOTE : This function Should not be modified, when the callback is needed,
		1053	the HAL_TIM_PWM_MspDeInit could be implemented in the user file
		1054	*/
		1055	}
		1056
		1057	/**
		1058	* @brief Starts the PWM signal generation.
		1059	* @param htim : TIM handle
		1060	* @param Channel : TIM Channels to be enabled
		1061	* This parameter can be one of the following values:
		1062	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1063	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1064	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1065	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1066	* @retval HAL status
		1067	*/
		1068	HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
		1069	{
		1070	/* Check the parameters */
		1071	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1072
		1073	/* Enable the Capture compare channel */
		1074	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		1075
		1076	/* Enable the Peripheral */
		1077	__HAL_TIM_ENABLE(htim);
		1078
		1079	/* Return function status */
		1080	return HAL_OK;
		1081	}
		1082
		1083	/**
		1084	* @brief Stops the PWM signal generation.
		1085	* @param htim : TIM handle
		1086	* @param Channel : TIM Channels to be disabled
		1087	* This parameter can be one of the following values:
		1088	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1089	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1090	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1091	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1092	* @retval HAL status
		1093	*/
		1094	HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
		1095	{
		1096	/* Check the parameters */
		1097	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1098
		1099	/* Disable the Capture compare channel */
		1100	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		1101
		1102	/* Disable the Peripheral */
		1103	__HAL_TIM_DISABLE(htim);
		1104
		1105	/* Change the htim state */
		1106	htim->State = HAL_TIM_STATE_READY;
		1107
		1108	/* Return function status */
		1109	return HAL_OK;
		1110	}
		1111
		1112	/**
		1113	* @brief Starts the PWM signal generation in interrupt mode.
		1114	* @param htim : TIM handle
		1115	* @param Channel : TIM Channel to be enabled
		1116	* This parameter can be one of the following values:
		1117	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1118	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1119	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1120	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1121	* @retval HAL status
		1122	*/
		1123	HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
		1124	{
		1125	/* Check the parameters */
		1126	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1127
		1128	switch (Channel)
		1129	{
		1130	case TIM_CHANNEL_1:
		1131	{
		1132	/* Enable the TIM Capture/Compare 1 interrupt */
		1133	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
		1134	}
		1135	break;
		1136
		1137	case TIM_CHANNEL_2:
		1138	{
		1139	/* Enable the TIM Capture/Compare 2 interrupt */
		1140	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
		1141	}
		1142	break;
		1143
		1144	case TIM_CHANNEL_3:
		1145	{
		1146	/* Enable the TIM Capture/Compare 3 interrupt */
		1147	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
		1148	}
		1149	break;
		1150
		1151	case TIM_CHANNEL_4:
		1152	{
		1153	/* Enable the TIM Capture/Compare 4 interrupt */
		1154	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
		1155	}
		1156	break;
		1157
		1158	default:
		1159	break;
		1160	}
		1161
		1162	/* Enable the Capture compare channel */
		1163	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		1164
		1165	/* Enable the Peripheral */
		1166	__HAL_TIM_ENABLE(htim);
		1167
		1168	/* Return function status */
		1169	return HAL_OK;
		1170	}
		1171
		1172	/**
		1173	* @brief Stops the PWM signal generation in interrupt mode.
		1174	* @param htim : TIM handle
		1175	* @param Channel : TIM Channels to be disabled
		1176	* This parameter can be one of the following values:
		1177	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1178	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1179	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1180	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1181	* @retval HAL status
		1182	*/
		1183	HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
		1184	{
		1185	/* Check the parameters */
		1186	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1187
		1188	switch (Channel)
		1189	{
		1190	case TIM_CHANNEL_1:
		1191	{
		1192	/* Disable the TIM Capture/Compare 1 interrupt */
		1193	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
		1194	}
		1195	break;
		1196
		1197	case TIM_CHANNEL_2:
		1198	{
		1199	/* Disable the TIM Capture/Compare 2 interrupt */
		1200	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
		1201	}
		1202	break;
		1203
		1204	case TIM_CHANNEL_3:
		1205	{
		1206	/* Disable the TIM Capture/Compare 3 interrupt */
		1207	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
		1208	}
		1209	break;
		1210
		1211	case TIM_CHANNEL_4:
		1212	{
		1213	/* Disable the TIM Capture/Compare 4 interrupt */
		1214	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
		1215	}
		1216	break;
		1217
		1218	default:
		1219	break;
		1220	}
		1221
		1222	/* Disable the Capture compare channel */
		1223	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		1224
		1225
		1226	/* Disable the Peripheral */
		1227	__HAL_TIM_DISABLE(htim);
		1228
		1229	/* Return function status */
		1230	return HAL_OK;
		1231	}
		1232
		1233	/**
		1234	* @brief Starts the TIM PWM signal generation in DMA mode.
		1235	* @param htim : TIM handle
		1236	* @param Channel : TIM Channels to be enabled
		1237	* This parameter can be one of the following values:
		1238	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1239	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1240	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1241	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1242	* @param pData: The source Buffer address.
		1243	* @param Length: The length of data to be transferred from memory to TIM peripheral
		1244	* @retval HAL status
		1245	*/
		1246	HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
		1247	{
		1248	/* Check the parameters */
		1249	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1250
		1251	if((htim->State == HAL_TIM_STATE_BUSY))
		1252	{
		1253	return HAL_BUSY;
		1254	}
		1255	else if((htim->State == HAL_TIM_STATE_READY))
		1256	{
		1257	if(((uint32_t)pData == 0 ) && (Length > 0))
		1258	{
		1259	return HAL_ERROR;
		1260	}
		1261	else
		1262	{
		1263	htim->State = HAL_TIM_STATE_BUSY;
		1264	}
		1265	}
		1266	else
		1267	{
		1268	return HAL_ERROR;
		1269	}
		1270
		1271	switch (Channel)
		1272	{
		1273	case TIM_CHANNEL_1:
		1274	{
		1275	/* Set the DMA Period elapsed callback */
		1276	htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
		1277
		1278	/* Set the DMA error callback */
		1279	htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
		1280
		1281	/* Enable the DMA channel */
		1282	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
		1283
		1284	/* Enable the TIM Capture/Compare 1 DMA request */
		1285	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
		1286	}
		1287	break;
		1288
		1289	case TIM_CHANNEL_2:
		1290	{
		1291	/* Set the DMA Period elapsed callback */
		1292	htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
		1293
		1294	/* Set the DMA error callback */
		1295	htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
		1296
		1297	/* Enable the DMA channel */
		1298	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
		1299
		1300	/* Enable the TIM Capture/Compare 2 DMA request */
		1301	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
		1302	}
		1303	break;
		1304
		1305	case TIM_CHANNEL_3:
		1306	{
		1307	/* Set the DMA Period elapsed callback */
		1308	htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
		1309
		1310	/* Set the DMA error callback */
		1311	htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
		1312
		1313	/* Enable the DMA channel */
		1314	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
		1315
		1316	/* Enable the TIM Output Capture/Compare 3 request */
		1317	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
		1318	}
		1319	break;
		1320
		1321	case TIM_CHANNEL_4:
		1322	{
		1323	/* Set the DMA Period elapsed callback */
		1324	htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
		1325
		1326	/* Set the DMA error callback */
		1327	htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
		1328
		1329	/* Enable the DMA channel */
		1330	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
		1331
		1332	/* Enable the TIM Capture/Compare 4 DMA request */
		1333	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
		1334	}
		1335	break;
		1336
		1337	default:
		1338	break;
		1339	}
		1340
		1341	/* Enable the Capture compare channel */
		1342	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		1343
		1344	/* Enable the Peripheral */
		1345	__HAL_TIM_ENABLE(htim);
		1346
		1347	/* Return function status */
		1348	return HAL_OK;
		1349	}
		1350
		1351	/**
		1352	* @brief Stops the TIM PWM signal generation in DMA mode.
		1353	* @param htim : TIM handle
		1354	* @param Channel : TIM Channels to be disabled
		1355	* This parameter can be one of the following values:
		1356	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1357	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1358	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1359	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1360	* @retval HAL status
		1361	*/
		1362	HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
		1363	{
		1364	/* Check the parameters */
		1365	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1366
		1367	switch (Channel)
		1368	{
		1369	case TIM_CHANNEL_1:
		1370	{
		1371	/* Disable the TIM Capture/Compare 1 DMA request */
		1372	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
		1373	}
		1374	break;
		1375
		1376	case TIM_CHANNEL_2:
		1377	{
		1378	/* Disable the TIM Capture/Compare 2 DMA request */
		1379	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
		1380	}
		1381	break;
		1382
		1383	case TIM_CHANNEL_3:
		1384	{
		1385	/* Disable the TIM Capture/Compare 3 DMA request */
		1386	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
		1387	}
		1388	break;
		1389
		1390	case TIM_CHANNEL_4:
		1391	{
		1392	/* Disable the TIM Capture/Compare 4 interrupt */
		1393	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
		1394	}
		1395	break;
		1396
		1397	default:
		1398	break;
		1399	}
		1400
		1401	/* Disable the Capture compare channel */
		1402	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		1403
		1404	/* Disable the Peripheral */
		1405	__HAL_TIM_DISABLE(htim);
		1406
		1407	/* Change the htim state */
		1408	htim->State = HAL_TIM_STATE_READY;
		1409
		1410	/* Return function status */
		1411	return HAL_OK;
		1412	}
		1413
		1414	/**
		1415	* @}
		1416	*/
		1417
		1418	/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
		1419	* @brief Time Input Capture functions
		1420	*
		1421	@verbatim
		1422	==============================================================================
		1423	##### Time Input Capture functions #####
		1424	==============================================================================
		1425	[..]
		1426	This section provides functions allowing to:
		1427	(+) Initialize and configure the TIM Input Capture.
		1428	(+) De-initialize the TIM Input Capture.
		1429	(+) Start the Time Input Capture.
		1430	(+) Stop the Time Input Capture.
		1431	(+) Start the Time Input Capture and enable interrupt.
		1432	(+) Stop the Time Input Capture and disable interrupt.
		1433	(+) Start the Time Input Capture and enable DMA transfer.
		1434	(+) Stop the Time Input Capture and disable DMA transfer.
		1435
		1436	@endverbatim
		1437	* @{
		1438	*/
		1439	/**
		1440	* @brief Initializes the TIM Input Capture Time base according to the specified
		1441	* parameters in the TIM_HandleTypeDef and create the associated handle.
		1442	* @param htim: TIM Input Capture handle
		1443	* @retval HAL status
		1444	*/
		1445	HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
		1446	{
		1447	/* Check the TIM handle allocation */
		1448	if(htim == NULL)
		1449	{
		1450	return HAL_ERROR;
		1451	}
		1452
		1453	/* Check the parameters */
		1454	assert_param(IS_TIM_INSTANCE(htim->Instance));
		1455	assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
		1456	assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
		1457
		1458	if(htim->State == HAL_TIM_STATE_RESET)
		1459	{
		1460	/* Allocate lock resource and initialize it */
		1461	htim->Lock = HAL_UNLOCKED;
		1462
		1463	/* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
		1464	HAL_TIM_IC_MspInit(htim);
		1465	}
		1466
		1467	/* Set the TIM state */
		1468	htim->State= HAL_TIM_STATE_BUSY;
		1469
		1470	/* Init the base time for the input capture */
		1471	TIM_Base_SetConfig(htim->Instance, &htim->Init);
		1472
		1473	/* Initialize the TIM state*/
		1474	htim->State= HAL_TIM_STATE_READY;
		1475
		1476	return HAL_OK;
		1477	}
		1478
		1479	/**
		1480	* @brief DeInitializes the TIM peripheral
		1481	* @param htim: TIM Input Capture handle
		1482	* @retval HAL status
		1483	*/
		1484	HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
		1485	{
		1486	/* Check the parameters */
		1487	assert_param(IS_TIM_INSTANCE(htim->Instance));
		1488
		1489	htim->State = HAL_TIM_STATE_BUSY;
		1490
		1491	/* Disable the TIM Peripheral Clock */
		1492	__HAL_TIM_DISABLE(htim);
		1493
		1494	/* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
		1495	HAL_TIM_IC_MspDeInit(htim);
		1496
		1497	/* Change TIM state */
		1498	htim->State = HAL_TIM_STATE_RESET;
		1499
		1500	/* Release Lock */
		1501	__HAL_UNLOCK(htim);
		1502
		1503	return HAL_OK;
		1504	}
		1505
		1506	/**
		1507	* @brief Initializes the TIM Input Capture MSP.
		1508	* @param htim: TIM handle
		1509	* @retval None
		1510	*/
		1511	__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
		1512	{
		1513	/* Prevent unused argument(s) compilation warning */
		1514	UNUSED(htim);
		1515
		1516	/* NOTE : This function Should not be modified, when the callback is needed,
		1517	the HAL_TIM_IC_MspInit could be implemented in the user file
		1518	*/
		1519	}
		1520
		1521	/**
		1522	* @brief DeInitializes TIM Input Capture MSP.
		1523	* @param htim: TIM handle
		1524	* @retval None
		1525	*/
		1526	__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
		1527	{
		1528	/* Prevent unused argument(s) compilation warning */
		1529	UNUSED(htim);
		1530
		1531	/* NOTE : This function Should not be modified, when the callback is needed,
		1532	the HAL_TIM_IC_MspDeInit could be implemented in the user file
		1533	*/
		1534	}
		1535
		1536	/**
		1537	* @brief Starts the TIM Input Capture measurement.
		1538	* @param htim : TIM Input Capture handle
		1539	* @param Channel : TIM Channels to be enabled
		1540	* This parameter can be one of the following values:
		1541	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1542	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1543	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1544	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1545	* @retval HAL status
		1546	*/
		1547	HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
		1548	{
		1549	/* Check the parameters */
		1550	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1551
		1552	/* Enable the Input Capture channel */
		1553	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		1554
		1555	/* Enable the Peripheral */
		1556	__HAL_TIM_ENABLE(htim);
		1557
		1558	/* Return function status */
		1559	return HAL_OK;
		1560	}
		1561
		1562	/**
		1563	* @brief Stops the TIM Input Capture measurement.
		1564	* @param htim : TIM handle
		1565	* @param Channel : TIM Channels to be disabled
		1566	* This parameter can be one of the following values:
		1567	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1568	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1569	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1570	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1571	* @retval HAL status
		1572	*/
		1573	HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
		1574	{
		1575	/* Check the parameters */
		1576	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1577
		1578	/* Disable the Input Capture channel */
		1579	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		1580
		1581	/* Disable the Peripheral */
		1582	__HAL_TIM_DISABLE(htim);
		1583
		1584	/* Return function status */
		1585	return HAL_OK;
		1586	}
		1587
		1588	/**
		1589	* @brief Starts the TIM Input Capture measurement in interrupt mode.
		1590	* @param htim : TIM Input Capture handle
		1591	* @param Channel : TIM Channels to be enabled
		1592	* This parameter can be one of the following values:
		1593	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1594	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1595	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1596	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1597	* @retval HAL status
		1598	*/
		1599	HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
		1600	{
		1601	/* Check the parameters */
		1602	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1603
		1604	switch (Channel)
		1605	{
		1606	case TIM_CHANNEL_1:
		1607	{
		1608	/* Enable the TIM Capture/Compare 1 interrupt */
		1609	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
		1610	}
		1611	break;
		1612
		1613	case TIM_CHANNEL_2:
		1614	{
		1615	/* Enable the TIM Capture/Compare 2 interrupt */
		1616	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
		1617	}
		1618	break;
		1619
		1620	case TIM_CHANNEL_3:
		1621	{
		1622	/* Enable the TIM Capture/Compare 3 interrupt */
		1623	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
		1624	}
		1625	break;
		1626
		1627	case TIM_CHANNEL_4:
		1628	{
		1629	/* Enable the TIM Capture/Compare 4 interrupt */
		1630	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
		1631	}
		1632	break;
		1633
		1634	default:
		1635	break;
		1636	}
		1637	/* Enable the Input Capture channel */
		1638	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		1639
		1640	/* Enable the Peripheral */
		1641	__HAL_TIM_ENABLE(htim);
		1642
		1643	/* Return function status */
		1644	return HAL_OK;
		1645	}
		1646
		1647	/**
		1648	* @brief Stops the TIM Input Capture measurement in interrupt mode.
		1649	* @param htim : TIM handle
		1650	* @param Channel : TIM Channels to be disabled
		1651	* This parameter can be one of the following values:
		1652	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1653	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1654	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1655	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1656	* @retval HAL status
		1657	*/
		1658	HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
		1659	{
		1660	/* Check the parameters */
		1661	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1662
		1663	switch (Channel)
		1664	{
		1665	case TIM_CHANNEL_1:
		1666	{
		1667	/* Disable the TIM Capture/Compare 1 interrupt */
		1668	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
		1669	}
		1670	break;
		1671
		1672	case TIM_CHANNEL_2:
		1673	{
		1674	/* Disable the TIM Capture/Compare 2 interrupt */
		1675	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
		1676	}
		1677	break;
		1678
		1679	case TIM_CHANNEL_3:
		1680	{
		1681	/* Disable the TIM Capture/Compare 3 interrupt */
		1682	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
		1683	}
		1684	break;
		1685
		1686	case TIM_CHANNEL_4:
		1687	{
		1688	/* Disable the TIM Capture/Compare 4 interrupt */
		1689	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
		1690	}
		1691	break;
		1692
		1693	default:
		1694	break;
		1695	}
		1696
		1697	/* Disable the Input Capture channel */
		1698	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		1699
		1700	/* Disable the Peripheral */
		1701	__HAL_TIM_DISABLE(htim);
		1702
		1703	/* Return function status */
		1704	return HAL_OK;
		1705	}
		1706
		1707	/**
		1708	* @brief Starts the TIM Input Capture measurement in DMA mode.
		1709	* @param htim : TIM Input Capture handle
		1710	* @param Channel : TIM Channels to be enabled
		1711	* This parameter can be one of the following values:
		1712	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1713	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1714	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1715	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1716	* @param pData: The destination Buffer address.
		1717	* @param Length: The length of data to be transferred from TIM peripheral to memory.
		1718	* @retval HAL status
		1719	*/
		1720	HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
		1721	{
		1722	/* Check the parameters */
		1723	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1724	assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
		1725
		1726	if((htim->State == HAL_TIM_STATE_BUSY))
		1727	{
		1728	return HAL_BUSY;
		1729	}
		1730	else if((htim->State == HAL_TIM_STATE_READY))
		1731	{
		1732	if((pData == 0 ) && (Length > 0))
		1733	{
		1734	return HAL_ERROR;
		1735	}
		1736	else
		1737	{
		1738	htim->State = HAL_TIM_STATE_BUSY;
		1739	}
		1740	}
		1741	else
		1742	{
		1743	return HAL_ERROR;
		1744	}
		1745
		1746	switch (Channel)
		1747	{
		1748	case TIM_CHANNEL_1:
		1749	{
		1750	/* Set the DMA Period elapsed callback */
		1751	htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
		1752
		1753	/* Set the DMA error callback */
		1754	htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
		1755
		1756	/* Enable the DMA channel */
		1757	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
		1758
		1759	/* Enable the TIM Capture/Compare 1 DMA request */
		1760	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
		1761	}
		1762	break;
		1763
		1764	case TIM_CHANNEL_2:
		1765	{
		1766	/* Set the DMA Period elapsed callback */
		1767	htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
		1768
		1769	/* Set the DMA error callback */
		1770	htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
		1771
		1772	/* Enable the DMA channel */
		1773	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
		1774
		1775	/* Enable the TIM Capture/Compare 2 DMA request */
		1776	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
		1777	}
		1778	break;
		1779
		1780	case TIM_CHANNEL_3:
		1781	{
		1782	/* Set the DMA Period elapsed callback */
		1783	htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
		1784
		1785	/* Set the DMA error callback */
		1786	htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
		1787
		1788	/* Enable the DMA channel */
		1789	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
		1790
		1791	/* Enable the TIM Capture/Compare 3 DMA request */
		1792	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
		1793	}
		1794	break;
		1795
		1796	case TIM_CHANNEL_4:
		1797	{
		1798	/* Set the DMA Period elapsed callback */
		1799	htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
		1800
		1801	/* Set the DMA error callback */
		1802	htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
		1803
		1804	/* Enable the DMA channel */
		1805	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
		1806
		1807	/* Enable the TIM Capture/Compare 4 DMA request */
		1808	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
		1809	}
		1810	break;
		1811
		1812	default:
		1813	break;
		1814	}
		1815
		1816	/* Enable the Input Capture channel */
		1817	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
		1818
		1819	/* Enable the Peripheral */
		1820	__HAL_TIM_ENABLE(htim);
		1821
		1822	/* Return function status */
		1823	return HAL_OK;
		1824	}
		1825
		1826	/**
		1827	* @brief Stops the TIM Input Capture measurement in DMA mode.
		1828	* @param htim : TIM Input Capture handle
		1829	* @param Channel : TIM Channels to be disabled
		1830	* This parameter can be one of the following values:
		1831	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		1832	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		1833	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		1834	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		1835	* @retval HAL status
		1836	*/
		1837	HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
		1838	{
		1839	/* Check the parameters */
		1840	assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
		1841	assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
		1842
		1843	switch (Channel)
		1844	{
		1845	case TIM_CHANNEL_1:
		1846	{
		1847	/* Disable the TIM Capture/Compare 1 DMA request */
		1848	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
		1849	}
		1850	break;
		1851
		1852	case TIM_CHANNEL_2:
		1853	{
		1854	/* Disable the TIM Capture/Compare 2 DMA request */
		1855	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
		1856	}
		1857	break;
		1858
		1859	case TIM_CHANNEL_3:
		1860	{
		1861	/* Disable the TIM Capture/Compare 3 DMA request */
		1862	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
		1863	}
		1864	break;
		1865
		1866	case TIM_CHANNEL_4:
		1867	{
		1868	/* Disable the TIM Capture/Compare 4 DMA request */
		1869	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
		1870	}
		1871	break;
		1872
		1873	default:
		1874	break;
		1875	}
		1876
		1877	/* Disable the Input Capture channel */
		1878	TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
		1879
		1880	/* Disable the Peripheral */
		1881	__HAL_TIM_DISABLE(htim);
		1882
		1883	/* Change the htim state */
		1884	htim->State = HAL_TIM_STATE_READY;
		1885
		1886	/* Return function status */
		1887	return HAL_OK;
		1888	}
		1889	/**
		1890	* @}
		1891	*/
		1892
		1893	/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
		1894	* @brief Time One Pulse functions
		1895	*
		1896	@verbatim
		1897	==============================================================================
		1898	##### Time One Pulse functions #####
		1899	==============================================================================
		1900	[..]
		1901	This section provides functions allowing to:
		1902	(+) Initialize and configure the TIM One Pulse.
		1903	(+) De-initialize the TIM One Pulse.
		1904	(+) Start the Time One Pulse.
		1905	(+) Stop the Time One Pulse.
		1906	(+) Start the Time One Pulse and enable interrupt.
		1907	(+) Stop the Time One Pulse and disable interrupt.
		1908	(+) Start the Time One Pulse and enable DMA transfer.
		1909	(+) Stop the Time One Pulse and disable DMA transfer.
		1910
		1911	@endverbatim
		1912	* @{
		1913	*/
		1914	/**
		1915	* @brief Initializes the TIM One Pulse Time Base according to the specified
		1916	* parameters in the TIM_HandleTypeDef and create the associated handle.
		1917	* @param htim: TIM OnePulse handle
		1918	* @param OnePulseMode: Select the One pulse mode.
		1919	* This parameter can be one of the following values:
		1920	* @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
		1921	* @arg TIM_OPMODE_REPETITIVE: Repetitive pulses wil be generated.
		1922	* @retval HAL status
		1923	*/
		1924	HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
		1925	{
		1926	/* Check the TIM handle allocation */
		1927	if(htim == NULL)
		1928	{
		1929	return HAL_ERROR;
		1930	}
		1931
		1932	/* Check the parameters */
		1933	assert_param(IS_TIM_INSTANCE(htim->Instance));
		1934	assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
		1935	assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
		1936	assert_param(IS_TIM_OPM_MODE(OnePulseMode));
		1937
		1938	if(htim->State == HAL_TIM_STATE_RESET)
		1939	{
		1940	/* Allocate lock resource and initialize it */
		1941	htim->Lock = HAL_UNLOCKED;
		1942
		1943	/* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
		1944	HAL_TIM_OnePulse_MspInit(htim);
		1945	}
		1946
		1947	/* Set the TIM state */
		1948	htim->State= HAL_TIM_STATE_BUSY;
		1949
		1950	/* Configure the Time base in the One Pulse Mode */
		1951	TIM_Base_SetConfig(htim->Instance, &htim->Init);
		1952
		1953	/* Reset the OPM Bit */
		1954	htim->Instance->CR1 &= ~TIM_CR1_OPM;
		1955
		1956	/* Configure the OPM Mode */
		1957	htim->Instance->CR1 \|= OnePulseMode;
		1958
		1959	/* Initialize the TIM state*/
		1960	htim->State= HAL_TIM_STATE_READY;
		1961
		1962	return HAL_OK;
		1963	}
		1964
		1965	/**
		1966	* @brief DeInitializes the TIM One Pulse
		1967	* @param htim: TIM One Pulse handle
		1968	* @retval HAL status
		1969	*/
		1970	HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
		1971	{
		1972	/* Check the parameters */
		1973	assert_param(IS_TIM_INSTANCE(htim->Instance));
		1974
		1975	htim->State = HAL_TIM_STATE_BUSY;
		1976
		1977	/* Disable the TIM Peripheral Clock */
		1978	__HAL_TIM_DISABLE(htim);
		1979
		1980	/* DeInit the low level hardware: GPIO, CLOCK, NVIC */
		1981	HAL_TIM_OnePulse_MspDeInit(htim);
		1982
		1983	/* Change TIM state */
		1984	htim->State = HAL_TIM_STATE_RESET;
		1985
		1986	/* Release Lock */
		1987	__HAL_UNLOCK(htim);
		1988
		1989	return HAL_OK;
		1990	}
		1991
		1992	/**
		1993	* @brief Initializes the TIM One Pulse MSP.
		1994	* @param htim: TIM handle
		1995	* @retval None
		1996	*/
		1997	__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
		1998	{
		1999	/* Prevent unused argument(s) compilation warning */
		2000	UNUSED(htim);
		2001
		2002	/* NOTE : This function Should not be modified, when the callback is needed,
		2003	the HAL_TIM_OnePulse_MspInit could be implemented in the user file
		2004	*/
		2005	}
		2006
		2007	/**
		2008	* @brief DeInitializes TIM One Pulse MSP.
		2009	* @param htim: TIM handle
		2010	* @retval None
		2011	*/
		2012	__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
		2013	{
		2014	/* Prevent unused argument(s) compilation warning */
		2015	UNUSED(htim);
		2016
		2017	/* NOTE : This function Should not be modified, when the callback is needed,
		2018	the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
		2019	*/
		2020	}
		2021
		2022	/**
		2023	* @brief Starts the TIM One Pulse signal generation.
		2024	* @param htim : TIM One Pulse handle
		2025	* @param OutputChannel : TIM Channels to be enabled
		2026	* This parameter can be one of the following values:
		2027	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2028	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2029	* @retval HAL status
		2030	*/
		2031	HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
		2032	{
		2033	/* Enable the Capture compare and the Input Capture channels
		2034	(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
		2035	if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
		2036	if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
		2037	in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
		2038
		2039	No need to enable the counter, it's enabled automatically by hardware
		2040	(the counter starts in response to a stimulus and generate a pulse */
		2041
		2042	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
		2043	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
		2044
		2045	/* Return function status */
		2046	return HAL_OK;
		2047	}
		2048
		2049	/**
		2050	* @brief Stops the TIM One Pulse signal generation.
		2051	* @param htim : TIM One Pulse handle
		2052	* @param OutputChannel : TIM Channels to be disable
		2053	* This parameter can be one of the following values:
		2054	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2055	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2056	* @retval HAL status
		2057	*/
		2058	HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
		2059	{
		2060	/* Disable the Capture compare and the Input Capture channels
		2061	(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
		2062	if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
		2063	if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
		2064	in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
		2065
		2066	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
		2067	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
		2068
		2069	/* Disable the Peripheral */
		2070	__HAL_TIM_DISABLE(htim);
		2071
		2072	/* Return function status */
		2073	return HAL_OK;
		2074	}
		2075
		2076	/**
		2077	* @brief Starts the TIM One Pulse signal generation in interrupt mode.
		2078	* @param htim : TIM One Pulse handle
		2079	* @param OutputChannel : TIM Channels to be enabled
		2080	* This parameter can be one of the following values:
		2081	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2082	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2083	* @retval HAL status
		2084	*/
		2085	HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
		2086	{
		2087	/* Enable the Capture compare and the Input Capture channels
		2088	(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
		2089	if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
		2090	if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
		2091	in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
		2092
		2093	No need to enable the counter, it's enabled automatically by hardware
		2094	(the counter starts in response to a stimulus and generate a pulse */
		2095
		2096	/* Enable the TIM Capture/Compare 1 interrupt */
		2097	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
		2098
		2099	/* Enable the TIM Capture/Compare 2 interrupt */
		2100	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
		2101
		2102	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
		2103	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
		2104
		2105	/* Return function status */
		2106	return HAL_OK;
		2107	}
		2108
		2109	/**
		2110	* @brief Stops the TIM One Pulse signal generation in interrupt mode.
		2111	* @param htim : TIM One Pulse handle
		2112	* @param OutputChannel : TIM Channels to be enabled
		2113	* This parameter can be one of the following values:
		2114	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2115	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2116	* @retval HAL status
		2117	*/
		2118	HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
		2119	{
		2120	/* Disable the TIM Capture/Compare 1 interrupt */
		2121	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
		2122
		2123	/* Disable the TIM Capture/Compare 2 interrupt */
		2124	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
		2125
		2126	/* Disable the Capture compare and the Input Capture channels
		2127	(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
		2128	if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
		2129	if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
		2130	in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
		2131	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
		2132	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
		2133
		2134	/* Disable the Peripheral */
		2135	__HAL_TIM_DISABLE(htim);
		2136
		2137	/* Return function status */
		2138	return HAL_OK;
		2139	}
		2140
		2141	/**
		2142	* @}
		2143	*/
		2144
		2145	/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
		2146	* @brief Time Encoder functions
		2147	*
		2148	@verbatim
		2149	==============================================================================
		2150	##### Time Encoder functions #####
		2151	==============================================================================
		2152	[..]
		2153	This section provides functions allowing to:
		2154	(+) Initialize and configure the TIM Encoder.
		2155	(+) De-initialize the TIM Encoder.
		2156	(+) Start the Time Encoder.
		2157	(+) Stop the Time Encoder.
		2158	(+) Start the Time Encoder and enable interrupt.
		2159	(+) Stop the Time Encoder and disable interrupt.
		2160	(+) Start the Time Encoder and enable DMA transfer.
		2161	(+) Stop the Time Encoder and disable DMA transfer.
		2162
		2163	@endverbatim
		2164	* @{
		2165	*/
		2166	/**
		2167	* @brief Initializes the TIM Encoder Interface and create the associated handle.
		2168	* @param htim: TIM Encoder Interface handle
		2169	* @param sConfig: TIM Encoder Interface configuration structure
		2170	* @retval HAL status
		2171	*/
		2172	HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef htim, TIM_Encoder_InitTypeDef sConfig)
		2173	{
		2174	uint32_t tmpsmcr = 0;
		2175	uint32_t tmpccmr1 = 0;
		2176	uint32_t tmpccer = 0;
		2177
		2178	/* Check the TIM handle allocation */
		2179	if(htim == NULL)
		2180	{
		2181	return HAL_ERROR;
		2182	}
		2183
		2184	/* Check the parameters */
		2185	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		2186	assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
		2187	assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
		2188	assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
		2189	assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
		2190	assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
		2191	assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
		2192	assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
		2193	assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
		2194	assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
		2195
		2196	if(htim->State == HAL_TIM_STATE_RESET)
		2197	{
		2198	/* Allocate lock resource and initialize it */
		2199	htim->Lock = HAL_UNLOCKED;
		2200
		2201	/* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
		2202	HAL_TIM_Encoder_MspInit(htim);
		2203	}
		2204
		2205	/* Set the TIM state */
		2206	htim->State= HAL_TIM_STATE_BUSY;
		2207
		2208	/* Reset the SMS bits */
		2209	htim->Instance->SMCR &= ~TIM_SMCR_SMS;
		2210
		2211	/* Configure the Time base in the Encoder Mode */
		2212	TIM_Base_SetConfig(htim->Instance, &htim->Init);
		2213
		2214	/* Get the TIMx SMCR register value */
		2215	tmpsmcr = htim->Instance->SMCR;
		2216
		2217	/* Get the TIMx CCMR1 register value */
		2218	tmpccmr1 = htim->Instance->CCMR1;
		2219
		2220	/* Get the TIMx CCER register value */
		2221	tmpccer = htim->Instance->CCER;
		2222
		2223	/* Set the encoder Mode */
		2224	tmpsmcr \|= sConfig->EncoderMode;
		2225
		2226	/* Select the Capture Compare 1 and the Capture Compare 2 as input */
		2227	tmpccmr1 &= ~(TIM_CCMR1_CC1S \| TIM_CCMR1_CC2S);
		2228	tmpccmr1 \|= (sConfig->IC1Selection \| (sConfig->IC2Selection << 8));
		2229
		2230	/* Set the the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
		2231	tmpccmr1 &= ~(TIM_CCMR1_IC1PSC \| TIM_CCMR1_IC2PSC);
		2232	tmpccmr1 &= ~(TIM_CCMR1_IC1F \| TIM_CCMR1_IC2F);
		2233	tmpccmr1 \|= sConfig->IC1Prescaler \| (sConfig->IC2Prescaler << 8);
		2234	tmpccmr1 \|= (sConfig->IC1Filter << 4) \| (sConfig->IC2Filter << 12);
		2235
		2236	/* Set the TI1 and the TI2 Polarities */
		2237	tmpccer &= ~(TIM_CCER_CC1P \| TIM_CCER_CC2P);
		2238	tmpccer &= ~(TIM_CCER_CC1NP \| TIM_CCER_CC2NP);
		2239	tmpccer \|= sConfig->IC1Polarity \| (sConfig->IC2Polarity << 4);
		2240
		2241	/* Write to TIMx SMCR */
		2242	htim->Instance->SMCR = tmpsmcr;
		2243
		2244	/* Write to TIMx CCMR1 */
		2245	htim->Instance->CCMR1 = tmpccmr1;
		2246
		2247	/* Write to TIMx CCER */
		2248	htim->Instance->CCER = tmpccer;
		2249
		2250	/* Initialize the TIM state*/
		2251	htim->State= HAL_TIM_STATE_READY;
		2252
		2253	return HAL_OK;
		2254	}
		2255
		2256
		2257	/**
		2258	* @brief DeInitializes the TIM Encoder interface
		2259	* @param htim: TIM Encoder handle
		2260	* @retval HAL status
		2261	*/
		2262	HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
		2263	{
		2264	/* Check the parameters */
		2265	assert_param(IS_TIM_INSTANCE(htim->Instance));
		2266
		2267	htim->State = HAL_TIM_STATE_BUSY;
		2268
		2269	/* Disable the TIM Peripheral Clock */
		2270	__HAL_TIM_DISABLE(htim);
		2271
		2272	/* DeInit the low level hardware: GPIO, CLOCK, NVIC */
		2273	HAL_TIM_Encoder_MspDeInit(htim);
		2274
		2275	/* Change TIM state */
		2276	htim->State = HAL_TIM_STATE_RESET;
		2277
		2278	/* Release Lock */
		2279	__HAL_UNLOCK(htim);
		2280
		2281	return HAL_OK;
		2282	}
		2283
		2284	/**
		2285	* @brief Initializes the TIM Encoder Interface MSP.
		2286	* @param htim: TIM handle
		2287	* @retval None
		2288	*/
		2289	__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
		2290	{
		2291	/* Prevent unused argument(s) compilation warning */
		2292	UNUSED(htim);
		2293
		2294	/* NOTE : This function Should not be modified, when the callback is needed,
		2295	the HAL_TIM_Encoder_MspInit could be implemented in the user file
		2296	*/
		2297	}
		2298
		2299	/**
		2300	* @brief DeInitializes TIM Encoder Interface MSP.
		2301	* @param htim: TIM handle
		2302	* @retval None
		2303	*/
		2304	__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
		2305	{
		2306	/* Prevent unused argument(s) compilation warning */
		2307	UNUSED(htim);
		2308
		2309	/* NOTE : This function Should not be modified, when the callback is needed,
		2310	the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
		2311	*/
		2312	}
		2313
		2314	/**
		2315	* @brief Starts the TIM Encoder Interface.
		2316	* @param htim : TIM Encoder Interface handle
		2317	* @param Channel : TIM Channels to be enabled
		2318	* This parameter can be one of the following values:
		2319	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2320	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2321	* @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
		2322	* @retval HAL status
		2323	*/
		2324	HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
		2325	{
		2326	/* Check the parameters */
		2327	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		2328
		2329	/* Enable the encoder interface channels */
		2330	switch (Channel)
		2331	{
		2332	case TIM_CHANNEL_1:
		2333	{
		2334	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
		2335	break;
		2336	}
		2337	case TIM_CHANNEL_2:
		2338	{
		2339	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
		2340	break;
		2341	}
		2342	default :
		2343	{
		2344	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
		2345	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
		2346	break;
		2347	}
		2348	}
		2349	/* Enable the Peripheral */
		2350	__HAL_TIM_ENABLE(htim);
		2351
		2352	/* Return function status */
		2353	return HAL_OK;
		2354	}
		2355
		2356	/**
		2357	* @brief Stops the TIM Encoder Interface.
		2358	* @param htim : TIM Encoder Interface handle
		2359	* @param Channel : TIM Channels to be disabled
		2360	* This parameter can be one of the following values:
		2361	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2362	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2363	* @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
		2364	* @retval HAL status
		2365	*/
		2366	HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
		2367	{
		2368	/* Check the parameters */
		2369	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		2370
		2371	/* Disable the Input Capture channels 1 and 2
		2372	(in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
		2373	switch (Channel)
		2374	{
		2375	case TIM_CHANNEL_1:
		2376	{
		2377	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
		2378	break;
		2379	}
		2380	case TIM_CHANNEL_2:
		2381	{
		2382	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
		2383	break;
		2384	}
		2385	default :
		2386	{
		2387	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
		2388	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
		2389	break;
		2390	}
		2391	}
		2392
		2393	/* Disable the Peripheral */
		2394	__HAL_TIM_DISABLE(htim);
		2395
		2396	/* Return function status */
		2397	return HAL_OK;
		2398	}
		2399
		2400	/**
		2401	* @brief Starts the TIM Encoder Interface in interrupt mode.
		2402	* @param htim : TIM Encoder Interface handle
		2403	* @param Channel : TIM Channels to be enabled
		2404	* This parameter can be one of the following values:
		2405	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2406	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2407	* @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
		2408	* @retval HAL status
		2409	*/
		2410	HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
		2411	{
		2412	/* Check the parameters */
		2413	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		2414
		2415	/* Enable the encoder interface channels */
		2416	/* Enable the capture compare Interrupts 1 and/or 2 */
		2417	switch (Channel)
		2418	{
		2419	case TIM_CHANNEL_1:
		2420	{
		2421	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
		2422	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
		2423	break;
		2424	}
		2425	case TIM_CHANNEL_2:
		2426	{
		2427	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
		2428	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
		2429	break;
		2430	}
		2431	default :
		2432	{
		2433	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
		2434	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
		2435	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
		2436	__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
		2437	break;
		2438	}
		2439	}
		2440
		2441	/* Enable the Peripheral */
		2442	__HAL_TIM_ENABLE(htim);
		2443
		2444	/* Return function status */
		2445	return HAL_OK;
		2446	}
		2447
		2448	/**
		2449	* @brief Stops the TIM Encoder Interface in interrupt mode.
		2450	* @param htim : TIM Encoder Interface handle
		2451	* @param Channel : TIM Channels to be disabled
		2452	* This parameter can be one of the following values:
		2453	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2454	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2455	* @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
		2456	* @retval HAL status
		2457	*/
		2458	HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
		2459	{
		2460	/* Check the parameters */
		2461	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		2462
		2463	/* Disable the Input Capture channels 1 and 2
		2464	(in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
		2465	if(Channel == TIM_CHANNEL_1)
		2466	{
		2467	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
		2468
		2469	/* Disable the capture compare Interrupts 1 */
		2470	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
		2471	}
		2472	else if(Channel == TIM_CHANNEL_2)
		2473	{
		2474	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
		2475
		2476	/* Disable the capture compare Interrupts 2 */
		2477	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
		2478	}
		2479	else
		2480	{
		2481	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
		2482	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
		2483
		2484	/* Disable the capture compare Interrupts 1 and 2 */
		2485	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
		2486	__HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
		2487	}
		2488
		2489	/* Disable the Peripheral */
		2490	__HAL_TIM_DISABLE(htim);
		2491
		2492	/* Change the htim state */
		2493	htim->State = HAL_TIM_STATE_READY;
		2494
		2495	/* Return function status */
		2496	return HAL_OK;
		2497	}
		2498
		2499	/**
		2500	* @brief Starts the TIM Encoder Interface in DMA mode.
		2501	* @param htim : TIM Encoder Interface handle
		2502	* @param Channel : TIM Channels to be enabled
		2503	* This parameter can be one of the following values:
		2504	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2505	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2506	* @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
		2507	* @param pData1: The destination Buffer address for IC1.
		2508	* @param pData2: The destination Buffer address for IC2.
		2509	* @param Length: The length of data to be transferred from TIM peripheral to memory.
		2510	* @retval HAL status
		2511	*/
		2512	HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData1, uint32_t *pData2, uint16_t Length)
		2513	{
		2514	/* Check the parameters */
		2515	assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
		2516
		2517	if((htim->State == HAL_TIM_STATE_BUSY))
		2518	{
		2519	return HAL_BUSY;
		2520	}
		2521	else if((htim->State == HAL_TIM_STATE_READY))
		2522	{
		2523	if((((pData1 == 0) \|\| (pData2 == 0) )) && (Length > 0))
		2524	{
		2525	return HAL_ERROR;
		2526	}
		2527	else
		2528	{
		2529	htim->State = HAL_TIM_STATE_BUSY;
		2530	}
		2531	}
		2532	else
		2533	{
		2534	return HAL_ERROR;
		2535	}
		2536
		2537	switch (Channel)
		2538	{
		2539	case TIM_CHANNEL_1:
		2540	{
		2541	/* Set the DMA Period elapsed callback */
		2542	htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
		2543
		2544	/* Set the DMA error callback */
		2545	htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
		2546
		2547	/* Enable the DMA channel */
		2548	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
		2549
		2550	/* Enable the TIM Input Capture DMA request */
		2551	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
		2552
		2553	/* Enable the Peripheral */
		2554	__HAL_TIM_ENABLE(htim);
		2555
		2556	/* Enable the Capture compare channel */
		2557	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
		2558	}
		2559	break;
		2560
		2561	case TIM_CHANNEL_2:
		2562	{
		2563	/* Set the DMA Period elapsed callback */
		2564	htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
		2565
		2566	/* Set the DMA error callback */
		2567	htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
		2568	/* Enable the DMA channel */
		2569	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
		2570
		2571	/* Enable the TIM Input Capture DMA request */
		2572	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
		2573
		2574	/* Enable the Peripheral */
		2575	__HAL_TIM_ENABLE(htim);
		2576
		2577	/* Enable the Capture compare channel */
		2578	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
		2579	}
		2580	break;
		2581
		2582	case TIM_CHANNEL_ALL:
		2583	{
		2584	/* Set the DMA Period elapsed callback */
		2585	htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
		2586
		2587	/* Set the DMA error callback */
		2588	htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
		2589
		2590	/* Enable the DMA channel */
		2591	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
		2592
		2593	/* Set the DMA Period elapsed callback */
		2594	htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
		2595
		2596	/* Set the DMA error callback */
		2597	htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
		2598
		2599	/* Enable the DMA channel */
		2600	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
		2601
		2602	/* Enable the Peripheral */
		2603	__HAL_TIM_ENABLE(htim);
		2604
		2605	/* Enable the Capture compare channel */
		2606	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
		2607	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
		2608
		2609	/* Enable the TIM Input Capture DMA request */
		2610	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
		2611	/* Enable the TIM Input Capture DMA request */
		2612	__HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
		2613	}
		2614	break;
		2615
		2616	default:
		2617	break;
		2618	}
		2619	/* Return function status */
		2620	return HAL_OK;
		2621	}
		2622
		2623	/**
		2624	* @brief Stops the TIM Encoder Interface in DMA mode.
		2625	* @param htim : TIM Encoder Interface handle
		2626	* @param Channel : TIM Channels to be enabled
		2627	* This parameter can be one of the following values:
		2628	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2629	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2630	* @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
		2631	* @retval HAL status
		2632	*/
		2633	HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
		2634	{
		2635	/* Check the parameters */
		2636	assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
		2637
		2638	/* Disable the Input Capture channels 1 and 2
		2639	(in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
		2640	if(Channel == TIM_CHANNEL_1)
		2641	{
		2642	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
		2643
		2644	/* Disable the capture compare DMA Request 1 */
		2645	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
		2646	}
		2647	else if(Channel == TIM_CHANNEL_2)
		2648	{
		2649	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
		2650
		2651	/* Disable the capture compare DMA Request 2 */
		2652	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
		2653	}
		2654	else
		2655	{
		2656	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
		2657	TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
		2658
		2659	/* Disable the capture compare DMA Request 1 and 2 */
		2660	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
		2661	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
		2662	}
		2663
		2664	/* Disable the Peripheral */
		2665	__HAL_TIM_DISABLE(htim);
		2666
		2667	/* Change the htim state */
		2668	htim->State = HAL_TIM_STATE_READY;
		2669
		2670	/* Return function status */
		2671	return HAL_OK;
		2672	}
		2673
		2674	/**
		2675	* @}
		2676	*/
		2677	/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
		2678	* @brief IRQ handler management
		2679	*
		2680	@verbatim
		2681	==============================================================================
		2682	##### IRQ handler management #####
		2683	==============================================================================
		2684	[..]
		2685	This section provides Timer IRQ handler function.
		2686
		2687	@endverbatim
		2688	* @{
		2689	*/
		2690	/**
		2691	* @brief This function handles TIM interrupts requests.
		2692	* @param htim: TIM handle
		2693	* @retval None
		2694	*/
		2695	void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
		2696	{
		2697	/* Capture compare 1 event */
		2698	if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
		2699	{
		2700	if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
		2701	{
		2702	{
		2703	__HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
		2704	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
		2705
		2706	/* Input capture event */
		2707	if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
		2708	{
		2709	HAL_TIM_IC_CaptureCallback(htim);
		2710	}
		2711	/* Output compare event */
		2712	else
		2713	{
		2714	HAL_TIM_OC_DelayElapsedCallback(htim);
		2715	HAL_TIM_PWM_PulseFinishedCallback(htim);
		2716	}
		2717	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
		2718	}
		2719	}
		2720	}
		2721	/* Capture compare 2 event */
		2722	if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
		2723	{
		2724	if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
		2725	{
		2726	__HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
		2727	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
		2728	/* Input capture event */
		2729	if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
		2730	{
		2731	HAL_TIM_IC_CaptureCallback(htim);
		2732	}
		2733	/* Output compare event */
		2734	else
		2735	{
		2736	HAL_TIM_OC_DelayElapsedCallback(htim);
		2737	HAL_TIM_PWM_PulseFinishedCallback(htim);
		2738	}
		2739	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
		2740	}
		2741	}
		2742	/* Capture compare 3 event */
		2743	if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
		2744	{
		2745	if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
		2746	{
		2747	__HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
		2748	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
		2749	/* Input capture event */
		2750	if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
		2751	{
		2752	HAL_TIM_IC_CaptureCallback(htim);
		2753	}
		2754	/* Output compare event */
		2755	else
		2756	{
		2757	HAL_TIM_OC_DelayElapsedCallback(htim);
		2758	HAL_TIM_PWM_PulseFinishedCallback(htim);
		2759	}
		2760	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
		2761	}
		2762	}
		2763	/* Capture compare 4 event */
		2764	if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
		2765	{
		2766	if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
		2767	{
		2768	__HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
		2769	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
		2770	/* Input capture event */
		2771	if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
		2772	{
		2773	HAL_TIM_IC_CaptureCallback(htim);
		2774	}
		2775	/* Output compare event */
		2776	else
		2777	{
		2778	HAL_TIM_OC_DelayElapsedCallback(htim);
		2779	HAL_TIM_PWM_PulseFinishedCallback(htim);
		2780	}
		2781	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
		2782	}
		2783	}
		2784	/* TIM Update event */
		2785	if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
		2786	{
		2787	if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
		2788	{
		2789	__HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
		2790	HAL_TIM_PeriodElapsedCallback(htim);
		2791	}
		2792	}
		2793	/* TIM Trigger detection event */
		2794	if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
		2795	{
		2796	if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
		2797	{
		2798	__HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
		2799	HAL_TIM_TriggerCallback(htim);
		2800	}
		2801	}
		2802	}
		2803
		2804	/**
		2805	* @}
		2806	*/
		2807
		2808	/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
		2809	* @brief Peripheral Control functions
		2810	*
		2811	@verbatim
		2812	==============================================================================
		2813	##### Peripheral Control functions #####
		2814	==============================================================================
		2815	[..]
		2816	This section provides functions allowing to:
		2817	(+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
		2818	(+) Configure External Clock source.
		2819	(+) Configure Complementary channels, break features and dead time.
		2820	(+) Configure Master and the Slave synchronization.
		2821	(+) Configure the DMA Burst Mode.
		2822
		2823	@endverbatim
		2824	* @{
		2825	*/
		2826
		2827	/**
		2828	* @brief Initializes the TIM Output Compare Channels according to the specified
		2829	* parameters in the TIM_OC_InitTypeDef.
		2830	* @param htim: TIM Output Compare handle
		2831	* @param sConfig: TIM Output Compare configuration structure
		2832	* @param Channel : TIM Channels to configure
		2833	* This parameter can be one of the following values:
		2834	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2835	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2836	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		2837	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		2838	* @retval HAL status
		2839	*/
		2840	HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef htim, TIM_OC_InitTypeDef sConfig, uint32_t Channel)
		2841	{
		2842	/* Check the parameters */
		2843	assert_param(IS_TIM_CHANNELS(Channel));
		2844	assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
		2845	assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
		2846
		2847	/* Check input state */
		2848	__HAL_LOCK(htim);
		2849
		2850	htim->State = HAL_TIM_STATE_BUSY;
		2851
		2852	switch (Channel)
		2853	{
		2854	case TIM_CHANNEL_1:
		2855	{
		2856	assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
		2857	/* Configure the TIM Channel 1 in Output Compare */
		2858	TIM_OC1_SetConfig(htim->Instance, sConfig);
		2859	}
		2860	break;
		2861
		2862	case TIM_CHANNEL_2:
		2863	{
		2864	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		2865	/* Configure the TIM Channel 2 in Output Compare */
		2866	TIM_OC2_SetConfig(htim->Instance, sConfig);
		2867	}
		2868	break;
		2869
		2870	case TIM_CHANNEL_3:
		2871	{
		2872	assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
		2873	/* Configure the TIM Channel 3 in Output Compare */
		2874	TIM_OC3_SetConfig(htim->Instance, sConfig);
		2875	}
		2876	break;
		2877
		2878	case TIM_CHANNEL_4:
		2879	{
		2880	assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
		2881	/* Configure the TIM Channel 4 in Output Compare */
		2882	TIM_OC4_SetConfig(htim->Instance, sConfig);
		2883	}
		2884	break;
		2885
		2886	default:
		2887	break;
		2888	}
		2889	htim->State = HAL_TIM_STATE_READY;
		2890
		2891	__HAL_UNLOCK(htim);
		2892
		2893	return HAL_OK;
		2894	}
		2895
		2896	/**
		2897	* @brief Initializes the TIM Input Capture Channels according to the specified
		2898	* parameters in the TIM_IC_InitTypeDef.
		2899	* @param htim: TIM IC handle
		2900	* @param sConfig: TIM Input Capture configuration structure
		2901	* @param Channel : TIM Channels to be enabled
		2902	* This parameter can be one of the following values:
		2903	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		2904	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		2905	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		2906	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		2907	* @retval HAL status
		2908	*/
		2909	HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef htim, TIM_IC_InitTypeDef sConfig, uint32_t Channel)
		2910	{
		2911	/* Check the parameters */
		2912	assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
		2913	assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
		2914	assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
		2915	assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
		2916	assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
		2917
		2918	__HAL_LOCK(htim);
		2919
		2920	htim->State = HAL_TIM_STATE_BUSY;
		2921
		2922	if (Channel == TIM_CHANNEL_1)
		2923	{
		2924	/* TI1 Configuration */
		2925	TIM_TI1_SetConfig(htim->Instance,
		2926	sConfig->ICPolarity,
		2927	sConfig->ICSelection,
		2928	sConfig->ICFilter);
		2929
		2930	/* Reset the IC1PSC Bits */
		2931	htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
		2932
		2933	/* Set the IC1PSC value */
		2934	htim->Instance->CCMR1 \|= sConfig->ICPrescaler;
		2935	}
		2936	else if (Channel == TIM_CHANNEL_2)
		2937	{
		2938	/* TI2 Configuration */
		2939	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		2940
		2941	TIM_TI2_SetConfig(htim->Instance,
		2942	sConfig->ICPolarity,
		2943	sConfig->ICSelection,
		2944	sConfig->ICFilter);
		2945
		2946	/* Reset the IC2PSC Bits */
		2947	htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
		2948
		2949	/* Set the IC2PSC value */
		2950	htim->Instance->CCMR1 \|= (sConfig->ICPrescaler << 8);
		2951	}
		2952	else if (Channel == TIM_CHANNEL_3)
		2953	{
		2954	/* TI3 Configuration */
		2955	assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
		2956
		2957	TIM_TI3_SetConfig(htim->Instance,
		2958	sConfig->ICPolarity,
		2959	sConfig->ICSelection,
		2960	sConfig->ICFilter);
		2961
		2962	/* Reset the IC3PSC Bits */
		2963	htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
		2964
		2965	/* Set the IC3PSC value */
		2966	htim->Instance->CCMR2 \|= sConfig->ICPrescaler;
		2967	}
		2968	else
		2969	{
		2970	/* TI4 Configuration */
		2971	assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
		2972
		2973	TIM_TI4_SetConfig(htim->Instance,
		2974	sConfig->ICPolarity,
		2975	sConfig->ICSelection,
		2976	sConfig->ICFilter);
		2977
		2978	/* Reset the IC4PSC Bits */
		2979	htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
		2980
		2981	/* Set the IC4PSC value */
		2982	htim->Instance->CCMR2 \|= (sConfig->ICPrescaler << 8);
		2983	}
		2984
		2985	htim->State = HAL_TIM_STATE_READY;
		2986
		2987	__HAL_UNLOCK(htim);
		2988
		2989	return HAL_OK;
		2990	}
		2991
		2992	/**
		2993	* @brief Initializes the TIM PWM channels according to the specified
		2994	* parameters in the TIM_OC_InitTypeDef.
		2995	* @param htim: TIM PWM handle
		2996	* @param sConfig: TIM PWM configuration structure
		2997	* @param Channel : TIM Channels to be configured
		2998	* This parameter can be one of the following values:
		2999	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		3000	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		3001	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		3002	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		3003	* @retval HAL status
		3004	*/
		3005	HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef htim, TIM_OC_InitTypeDef sConfig, uint32_t Channel)
		3006	{
		3007	__HAL_LOCK(htim);
		3008
		3009	/* Check the parameters */
		3010	assert_param(IS_TIM_CHANNELS(Channel));
		3011	assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
		3012	assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
		3013	assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
		3014
		3015	htim->State = HAL_TIM_STATE_BUSY;
		3016
		3017	switch (Channel)
		3018	{
		3019	case TIM_CHANNEL_1:
		3020	{
		3021	assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
		3022	/* Configure the Channel 1 in PWM mode */
		3023	TIM_OC1_SetConfig(htim->Instance, sConfig);
		3024
		3025	/* Set the Preload enable bit for channel1 */
		3026	htim->Instance->CCMR1 \|= TIM_CCMR1_OC1PE;
		3027
		3028	/* Configure the Output Fast mode */
		3029	htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
		3030	htim->Instance->CCMR1 \|= sConfig->OCFastMode;
		3031	}
		3032	break;
		3033
		3034	case TIM_CHANNEL_2:
		3035	{
		3036	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		3037	/* Configure the Channel 2 in PWM mode */
		3038	TIM_OC2_SetConfig(htim->Instance, sConfig);
		3039
		3040	/* Set the Preload enable bit for channel2 */
		3041	htim->Instance->CCMR1 \|= TIM_CCMR1_OC2PE;
		3042
		3043	/* Configure the Output Fast mode */
		3044	htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
		3045	htim->Instance->CCMR1 \|= sConfig->OCFastMode << 8;
		3046	}
		3047	break;
		3048
		3049	case TIM_CHANNEL_3:
		3050	{
		3051	assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
		3052	/* Configure the Channel 3 in PWM mode */
		3053	TIM_OC3_SetConfig(htim->Instance, sConfig);
		3054
		3055	/* Set the Preload enable bit for channel3 */
		3056	htim->Instance->CCMR2 \|= TIM_CCMR2_OC3PE;
		3057
		3058	/* Configure the Output Fast mode */
		3059	htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
		3060	htim->Instance->CCMR2 \|= sConfig->OCFastMode;
		3061	}
		3062	break;
		3063
		3064	case TIM_CHANNEL_4:
		3065	{
		3066	assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
		3067	/* Configure the Channel 4 in PWM mode */
		3068	TIM_OC4_SetConfig(htim->Instance, sConfig);
		3069
		3070	/* Set the Preload enable bit for channel4 */
		3071	htim->Instance->CCMR2 \|= TIM_CCMR2_OC4PE;
		3072
		3073	/* Configure the Output Fast mode */
		3074	htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
		3075	htim->Instance->CCMR2 \|= sConfig->OCFastMode << 8;
		3076	}
		3077	break;
		3078
		3079	default:
		3080	break;
		3081	}
		3082
		3083	htim->State = HAL_TIM_STATE_READY;
		3084
		3085	__HAL_UNLOCK(htim);
		3086
		3087	return HAL_OK;
		3088	}
		3089
		3090	/**
		3091	* @brief Initializes the TIM One Pulse Channels according to the specified
		3092	* parameters in the TIM_OnePulse_InitTypeDef.
		3093	* @param htim: TIM One Pulse handle
		3094	* @param sConfig: TIM One Pulse configuration structure
		3095	* @param OutputChannel : TIM Channels to be enabled
		3096	* This parameter can be one of the following values:
		3097	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		3098	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		3099	* @param InputChannel : TIM Channels to be enabled
		3100	* This parameter can be one of the following values:
		3101	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		3102	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		3103	* @retval HAL status
		3104	*/
		3105	HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef htim, TIM_OnePulse_InitTypeDef sConfig, uint32_t OutputChannel, uint32_t InputChannel)
		3106	{
		3107	TIM_OC_InitTypeDef temp1;
		3108
		3109	/* Check the parameters */
		3110	assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
		3111	assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
		3112
		3113	if(OutputChannel != InputChannel)
		3114	{
		3115	__HAL_LOCK(htim);
		3116
		3117	htim->State = HAL_TIM_STATE_BUSY;
		3118
		3119	/* Extract the Ouput compare configuration from sConfig structure */
		3120	temp1.OCMode = sConfig->OCMode;
		3121	temp1.Pulse = sConfig->Pulse;
		3122	temp1.OCPolarity = sConfig->OCPolarity;
		3123	temp1.OCIdleState = sConfig->OCIdleState;
		3124
		3125	switch (OutputChannel)
		3126	{
		3127	case TIM_CHANNEL_1:
		3128	{
		3129	assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
		3130
		3131	TIM_OC1_SetConfig(htim->Instance, &temp1);
		3132	}
		3133	break;
		3134	case TIM_CHANNEL_2:
		3135	{
		3136	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		3137
		3138	TIM_OC2_SetConfig(htim->Instance, &temp1);
		3139	}
		3140	break;
		3141	default:
		3142	break;
		3143	}
		3144	switch (InputChannel)
		3145	{
		3146	case TIM_CHANNEL_1:
		3147	{
		3148	assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
		3149
		3150	TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
		3151	sConfig->ICSelection, sConfig->ICFilter);
		3152
		3153	/* Reset the IC1PSC Bits */
		3154	htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
		3155
		3156	/* Select the Trigger source */
		3157	htim->Instance->SMCR &= ~TIM_SMCR_TS;
		3158	htim->Instance->SMCR \|= TIM_TS_TI1FP1;
		3159
		3160	/* Select the Slave Mode */
		3161	htim->Instance->SMCR &= ~TIM_SMCR_SMS;
		3162	htim->Instance->SMCR \|= TIM_SLAVEMODE_TRIGGER;
		3163	}
		3164	break;
		3165	case TIM_CHANNEL_2:
		3166	{
		3167	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		3168
		3169	TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
		3170	sConfig->ICSelection, sConfig->ICFilter);
		3171
		3172	/* Reset the IC2PSC Bits */
		3173	htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
		3174
		3175	/* Select the Trigger source */
		3176	htim->Instance->SMCR &= ~TIM_SMCR_TS;
		3177	htim->Instance->SMCR \|= TIM_TS_TI2FP2;
		3178
		3179	/* Select the Slave Mode */
		3180	htim->Instance->SMCR &= ~TIM_SMCR_SMS;
		3181	htim->Instance->SMCR \|= TIM_SLAVEMODE_TRIGGER;
		3182	}
		3183	break;
		3184
		3185	default:
		3186	break;
		3187	}
		3188
		3189	htim->State = HAL_TIM_STATE_READY;
		3190
		3191	__HAL_UNLOCK(htim);
		3192
		3193	return HAL_OK;
		3194	}
		3195	else
		3196	{
		3197	return HAL_ERROR;
		3198	}
		3199	}
		3200
		3201	/**
		3202	* @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
		3203	* @param htim: TIM handle
		3204	* @param BurstBaseAddress : TIM Base address from where the DMA will start the Data write
		3205	* This parameter can be one of the following values:
		3206	* @arg TIM_DMABASE_CR1
		3207	* @arg TIM_DMABASE_CR2
		3208	* @arg TIM_DMABASE_SMCR
		3209	* @arg TIM_DMABASE_DIER
		3210	* @arg TIM_DMABASE_SR
		3211	* @arg TIM_DMABASE_EGR
		3212	* @arg TIM_DMABASE_CCMR1
		3213	* @arg TIM_DMABASE_CCMR2
		3214	* @arg TIM_DMABASE_CCER
		3215	* @arg TIM_DMABASE_CNT
		3216	* @arg TIM_DMABASE_PSC
		3217	* @arg TIM_DMABASE_ARR
		3218	* @arg TIM_DMABASE_CCR1
		3219	* @arg TIM_DMABASE_CCR2
		3220	* @arg TIM_DMABASE_CCR3
		3221	* @arg TIM_DMABASE_CCR4
		3222	* @arg TIM_DMABASE_DCR
		3223	* @param BurstRequestSrc: TIM DMA Request sources
		3224	* This parameter can be one of the following values:
		3225	* @arg TIM_DMA_UPDATE: TIM update Interrupt source
		3226	* @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
		3227	* @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
		3228	* @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
		3229	* @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
		3230	* @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
		3231	* @param BurstBuffer: The Buffer address.
		3232	* @param BurstLength: DMA Burst length. This parameter can be one value
		3233	* between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
		3234	* @retval HAL status
		3235	*/
		3236	HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
		3237	uint32_t* BurstBuffer, uint32_t BurstLength)
		3238	{
		3239	/* Check the parameters */
		3240	assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
		3241	assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
		3242	assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
		3243	assert_param(IS_TIM_DMA_LENGTH(BurstLength));
		3244
		3245	if((htim->State == HAL_TIM_STATE_BUSY))
		3246	{
		3247	return HAL_BUSY;
		3248	}
		3249	else if((htim->State == HAL_TIM_STATE_READY))
		3250	{
		3251	if((BurstBuffer == 0 ) && (BurstLength > 0))
		3252	{
		3253	return HAL_ERROR;
		3254	}
		3255	else
		3256	{
		3257	htim->State = HAL_TIM_STATE_BUSY;
		3258	}
		3259	}
		3260	else
		3261	{
		3262	return HAL_ERROR;
		3263	}
		3264
		3265	switch(BurstRequestSrc)
		3266	{
		3267	case TIM_DMA_UPDATE:
		3268	{
		3269	/* Set the DMA Period elapsed callback */
		3270	htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
		3271
		3272	/* Set the DMA error callback */
		3273	htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
		3274
		3275	/* Enable the DMA channel */
		3276	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
		3277	}
		3278	break;
		3279	case TIM_DMA_CC1:
		3280	{
		3281	/* Set the DMA Period elapsed callback */
		3282	htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
		3283
		3284	/* Set the DMA error callback */
		3285	htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
		3286
		3287	/* Enable the DMA channel */
		3288	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
		3289	}
		3290	break;
		3291	case TIM_DMA_CC2:
		3292	{
		3293	/* Set the DMA Period elapsed callback */
		3294	htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
		3295
		3296	/* Set the DMA error callback */
		3297	htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
		3298
		3299	/* Enable the DMA channel */
		3300	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
		3301	}
		3302	break;
		3303	case TIM_DMA_CC3:
		3304	{
		3305	/* Set the DMA Period elapsed callback */
		3306	htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
		3307
		3308	/* Set the DMA error callback */
		3309	htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
		3310
		3311	/* Enable the DMA channel */
		3312	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
		3313	}
		3314	break;
		3315	case TIM_DMA_CC4:
		3316	{
		3317	/* Set the DMA Period elapsed callback */
		3318	htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
		3319
		3320	/* Set the DMA error callback */
		3321	htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
		3322
		3323	/* Enable the DMA channel */
		3324	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
		3325	}
		3326	break;
		3327	case TIM_DMA_TRIGGER:
		3328	{
		3329	/* Set the DMA Period elapsed callback */
		3330	htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
		3331
		3332	/* Set the DMA error callback */
		3333	htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
		3334
		3335	/* Enable the DMA channel */
		3336	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
		3337	}
		3338	break;
		3339	default:
		3340	break;
		3341	}
		3342	/* configure the DMA Burst Mode */
		3343	htim->Instance->DCR = BurstBaseAddress \| BurstLength;
		3344
		3345	/* Enable the TIM DMA Request */
		3346	__HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
		3347
		3348	htim->State = HAL_TIM_STATE_READY;
		3349
		3350	/* Return function status */
		3351	return HAL_OK;
		3352	}
		3353
		3354	/**
		3355	* @brief Stops the TIM DMA Burst mode
		3356	* @param htim: TIM handle
		3357	* @param BurstRequestSrc: TIM DMA Request sources to disable
		3358	* @retval HAL status
		3359	*/
		3360	HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
		3361	{
		3362	/* Check the parameters */
		3363	assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
		3364
		3365	/* Abort the DMA transfer (at least disable the DMA channel) */
		3366	switch(BurstRequestSrc)
		3367	{
		3368	case TIM_DMA_UPDATE:
		3369	{
		3370	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
		3371	}
		3372	break;
		3373	case TIM_DMA_CC1:
		3374	{
		3375	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
		3376	}
		3377	break;
		3378	case TIM_DMA_CC2:
		3379	{
		3380	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
		3381	}
		3382	break;
		3383	case TIM_DMA_CC3:
		3384	{
		3385	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
		3386	}
		3387	break;
		3388	case TIM_DMA_CC4:
		3389	{
		3390	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
		3391	}
		3392	break;
		3393	case TIM_DMA_TRIGGER:
		3394	{
		3395	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
		3396	}
		3397	break;
		3398	default:
		3399	break;
		3400	}
		3401
		3402	/* Disable the TIM Update DMA request */
		3403	__HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
		3404
		3405	/* Return function status */
		3406	return HAL_OK;
		3407	}
		3408
		3409	/**
		3410	* @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
		3411	* @param htim: TIM handle
		3412	* @param BurstBaseAddress : TIM Base address from where the DMA will starts the Data read
		3413	* This parameter can be one of the following values:
		3414	* @arg TIM_DMABASE_CR1
		3415	* @arg TIM_DMABASE_CR2
		3416	* @arg TIM_DMABASE_SMCR
		3417	* @arg TIM_DMABASE_DIER
		3418	* @arg TIM_DMABASE_SR
		3419	* @arg TIM_DMABASE_EGR
		3420	* @arg TIM_DMABASE_CCMR1
		3421	* @arg TIM_DMABASE_CCMR2
		3422	* @arg TIM_DMABASE_CCER
		3423	* @arg TIM_DMABASE_CNT
		3424	* @arg TIM_DMABASE_PSC
		3425	* @arg TIM_DMABASE_ARR
		3426	* @arg TIM_DMABASE_CCR1
		3427	* @arg TIM_DMABASE_CCR2
		3428	* @arg TIM_DMABASE_CCR3
		3429	* @arg TIM_DMABASE_CCR4
		3430	* @arg TIM_DMABASE_DCR
		3431	* @param BurstRequestSrc: TIM DMA Request sources
		3432	* This parameter can be one of the following values:
		3433	* @arg TIM_DMA_UPDATE: TIM update Interrupt source
		3434	* @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
		3435	* @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
		3436	* @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
		3437	* @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
		3438	* @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
		3439	* @param BurstBuffer: The Buffer address.
		3440	* @param BurstLength: DMA Burst length. This parameter can be one value
		3441	* between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
		3442	* @retval HAL status
		3443	*/
		3444	HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
		3445	uint32_t *BurstBuffer, uint32_t BurstLength)
		3446	{
		3447	/* Check the parameters */
		3448	assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
		3449	assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
		3450	assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
		3451	assert_param(IS_TIM_DMA_LENGTH(BurstLength));
		3452
		3453	if((htim->State == HAL_TIM_STATE_BUSY))
		3454	{
		3455	return HAL_BUSY;
		3456	}
		3457	else if((htim->State == HAL_TIM_STATE_READY))
		3458	{
		3459	if((BurstBuffer == 0 ) && (BurstLength > 0))
		3460	{
		3461	return HAL_ERROR;
		3462	}
		3463	else
		3464	{
		3465	htim->State = HAL_TIM_STATE_BUSY;
		3466	}
		3467	}
		3468	else
		3469	{
		3470	return HAL_ERROR;
		3471	}
		3472
		3473	switch(BurstRequestSrc)
		3474	{
		3475	case TIM_DMA_UPDATE:
		3476	{
		3477	/* Set the DMA Period elapsed callback */
		3478	htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
		3479
		3480	/* Set the DMA error callback */
		3481	htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
		3482
		3483	/* Enable the DMA channel */
		3484	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
		3485	}
		3486	break;
		3487	case TIM_DMA_CC1:
		3488	{
		3489	/* Set the DMA Period elapsed callback */
		3490	htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
		3491
		3492	/* Set the DMA error callback */
		3493	htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
		3494
		3495	/* Enable the DMA channel */
		3496	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
		3497	}
		3498	break;
		3499	case TIM_DMA_CC2:
		3500	{
		3501	/* Set the DMA Period elapsed callback */
		3502	htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
		3503
		3504	/* Set the DMA error callback */
		3505	htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
		3506
		3507	/* Enable the DMA channel */
		3508	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
		3509	}
		3510	break;
		3511	case TIM_DMA_CC3:
		3512	{
		3513	/* Set the DMA Period elapsed callback */
		3514	htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
		3515
		3516	/* Set the DMA error callback */
		3517	htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
		3518
		3519	/* Enable the DMA channel */
		3520	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
		3521	}
		3522	break;
		3523	case TIM_DMA_CC4:
		3524	{
		3525	/* Set the DMA Period elapsed callback */
		3526	htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
		3527
		3528	/* Set the DMA error callback */
		3529	htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
		3530
		3531	/* Enable the DMA channel */
		3532	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
		3533	}
		3534	break;
		3535	case TIM_DMA_TRIGGER:
		3536	{
		3537	/* Set the DMA Period elapsed callback */
		3538	htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
		3539
		3540	/* Set the DMA error callback */
		3541	htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
		3542
		3543	/* Enable the DMA channel */
		3544	HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
		3545	}
		3546	break;
		3547	default:
		3548	break;
		3549	}
		3550
		3551	/* configure the DMA Burst Mode */
		3552	htim->Instance->DCR = BurstBaseAddress \| BurstLength;
		3553
		3554	/* Enable the TIM DMA Request */
		3555	__HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
		3556
		3557	htim->State = HAL_TIM_STATE_READY;
		3558
		3559	/* Return function status */
		3560	return HAL_OK;
		3561	}
		3562
		3563	/**
		3564	* @brief Stop the DMA burst reading
		3565	* @param htim: TIM handle
		3566	* @param BurstRequestSrc: TIM DMA Request sources to disable.
		3567	* @retval HAL status
		3568	*/
		3569	HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
		3570	{
		3571	/* Check the parameters */
		3572	assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
		3573
		3574	/* Abort the DMA transfer (at least disable the DMA channel) */
		3575	switch(BurstRequestSrc)
		3576	{
		3577	case TIM_DMA_UPDATE:
		3578	{
		3579	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
		3580	}
		3581	break;
		3582	case TIM_DMA_CC1:
		3583	{
		3584	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
		3585	}
		3586	break;
		3587	case TIM_DMA_CC2:
		3588	{
		3589	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
		3590	}
		3591	break;
		3592	case TIM_DMA_CC3:
		3593	{
		3594	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
		3595	}
		3596	break;
		3597	case TIM_DMA_CC4:
		3598	{
		3599	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
		3600	}
		3601	break;
		3602	case TIM_DMA_TRIGGER:
		3603	{
		3604	HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
		3605	}
		3606	break;
		3607	default:
		3608	break;
		3609	}
		3610
		3611	/* Disable the TIM Update DMA request */
		3612	__HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
		3613
		3614	/* Return function status */
		3615	return HAL_OK;
		3616	}
		3617
		3618	/**
		3619	* @brief Generate a software event
		3620	* @param htim: TIM handle
		3621	* @param EventSource: specifies the event source.
		3622	* This parameter can be one of the following values:
		3623	* @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
		3624	* @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
		3625	* @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
		3626	* @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
		3627	* @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
		3628	* @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
		3629	* @note TIM6 and TIM7 can only generate an update event.
		3630	* @retval HAL status
		3631	*/
		3632
		3633	HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
		3634	{
		3635	/* Check the parameters */
		3636	assert_param(IS_TIM_INSTANCE(htim->Instance));
		3637	assert_param(IS_TIM_EVENT_SOURCE(EventSource));
		3638
		3639	/* Process Locked */
		3640	__HAL_LOCK(htim);
		3641
		3642	/* Change the TIM state */
		3643	htim->State = HAL_TIM_STATE_BUSY;
		3644
		3645	/* Set the event sources */
		3646	htim->Instance->EGR = EventSource;
		3647
		3648	/* Change the TIM state */
		3649	htim->State = HAL_TIM_STATE_READY;
		3650
		3651	__HAL_UNLOCK(htim);
		3652
		3653	/* Return function status */
		3654	return HAL_OK;
		3655	}
		3656
		3657	/**
		3658	* @brief Configures the OCRef clear feature
		3659	* @param htim: TIM handle
		3660	* @param sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that
		3661	* contains the OCREF clear feature and parameters for the TIM peripheral.
		3662	* @param Channel: specifies the TIM Channel
		3663	* This parameter can be one of the following values:
		3664	* @arg TIM_CHANNEL_1: TIM Channel 1
		3665	* @arg TIM_CHANNEL_2: TIM Channel 2
		3666	* @arg TIM_CHANNEL_3: TIM Channel 3
		3667	* @arg TIM_CHANNEL_4: TIM Channel 4
		3668	* @retval HAL status
		3669	*/
		3670	HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef htim, TIM_ClearInputConfigTypeDef sClearInputConfig, uint32_t Channel)
		3671	{
		3672
		3673	/* Check the parameters */
		3674	assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
		3675	assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
		3676	assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
		3677	assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
		3678	assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
		3679
		3680	/* Process Locked */
		3681	__HAL_LOCK(htim);
		3682
		3683	htim->State = HAL_TIM_STATE_BUSY;
		3684
		3685	switch (sClearInputConfig->ClearInputSource)
		3686	{
		3687	case TIM_CLEARINPUTSOURCE_NONE:
		3688	{
		3689	/* Clear the OCREF clear selection bit */
		3690	CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
		3691
		3692	/* Clear the ETR Bits */
		3693	CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF \| TIM_SMCR_ETPS \| TIM_SMCR_ECE \| TIM_SMCR_ETP));
		3694
		3695	}
		3696	break;
		3697
		3698	case TIM_CLEARINPUTSOURCE_OCREFCLR:
		3699	{
		3700	/* Clear the OCREF clear selection bit */
		3701	CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
		3702	}
		3703	break;
		3704
		3705	case TIM_CLEARINPUTSOURCE_ETR:
		3706	{
		3707	TIM_ETR_SetConfig(htim->Instance,
		3708	sClearInputConfig->ClearInputPrescaler,
		3709	sClearInputConfig->ClearInputPolarity,
		3710	sClearInputConfig->ClearInputFilter);
		3711
		3712	/* Set the OCREF clear selection bit */
		3713	SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
		3714	}
		3715	break;
		3716
		3717	default:
		3718	break;
		3719
		3720	}
		3721
		3722	switch (Channel)
		3723	{
		3724	case TIM_CHANNEL_1:
		3725	{
		3726	if(sClearInputConfig->ClearInputState != RESET)
		3727	{
		3728	/* Enable the Ocref clear feature for Channel 1 */
		3729	htim->Instance->CCMR1 \|= TIM_CCMR1_OC1CE;
		3730	}
		3731	else
		3732	{
		3733	/* Disable the Ocref clear feature for Channel 1 */
		3734	htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
		3735	}
		3736	}
		3737	break;
		3738	case TIM_CHANNEL_2:
		3739	{
		3740	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		3741	if(sClearInputConfig->ClearInputState != RESET)
		3742	{
		3743	/* Enable the Ocref clear feature for Channel 2 */
		3744	htim->Instance->CCMR1 \|= TIM_CCMR1_OC2CE;
		3745	}
		3746	else
		3747	{
		3748	/* Disable the Ocref clear feature for Channel 2 */
		3749	htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
		3750	}
		3751	}
		3752	break;
		3753	case TIM_CHANNEL_3:
		3754	{
		3755	assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
		3756	if(sClearInputConfig->ClearInputState != RESET)
		3757	{
		3758	/* Enable the Ocref clear feature for Channel 3 */
		3759	htim->Instance->CCMR2 \|= TIM_CCMR2_OC3CE;
		3760	}
		3761	else
		3762	{
		3763	/* Disable the Ocref clear feature for Channel 3 */
		3764	htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
		3765	}
		3766	}
		3767	break;
		3768	case TIM_CHANNEL_4:
		3769	{
		3770	assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
		3771	if(sClearInputConfig->ClearInputState != RESET)
		3772	{
		3773	/* Enable the Ocref clear feature for Channel 4 */
		3774	htim->Instance->CCMR2 \|= TIM_CCMR2_OC4CE;
		3775	}
		3776	else
		3777	{
		3778	/* Disable the Ocref clear feature for Channel 4 */
		3779	htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
		3780	}
		3781	}
		3782	break;
		3783	default:
		3784	break;
		3785	}
		3786
		3787	htim->State = HAL_TIM_STATE_READY;
		3788
		3789	__HAL_UNLOCK(htim);
		3790
		3791	return HAL_OK;
		3792	}
		3793
		3794	/**
		3795	* @brief Configures the clock source to be used
		3796	* @param htim: TIM handle
		3797	* @param sClockSourceConfig: pointer to a TIM_ClockConfigTypeDef structure that
		3798	* contains the clock source information for the TIM peripheral.
		3799	* @retval HAL status
		3800	*/
		3801	HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef htim, TIM_ClockConfigTypeDef sClockSourceConfig)
		3802	{
		3803	uint32_t tmpsmcr = 0;
		3804
		3805	/* Process Locked */
		3806	__HAL_LOCK(htim);
		3807
		3808	htim->State = HAL_TIM_STATE_BUSY;
		3809
		3810	/* Check the parameters */
		3811	assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
		3812
		3813	/* Reset the SMS, TS, ECE, ETPS and ETRF bits */
		3814	tmpsmcr = htim->Instance->SMCR;
		3815	tmpsmcr &= ~(TIM_SMCR_SMS \| TIM_SMCR_TS);
		3816	tmpsmcr &= ~(TIM_SMCR_ETF \| TIM_SMCR_ETPS \| TIM_SMCR_ECE \| TIM_SMCR_ETP);
		3817	htim->Instance->SMCR = tmpsmcr;
		3818
		3819	switch (sClockSourceConfig->ClockSource)
		3820	{
		3821	case TIM_CLOCKSOURCE_INTERNAL:
		3822	{
		3823	assert_param(IS_TIM_INSTANCE(htim->Instance));
		3824	/* Disable slave mode to clock the prescaler directly with the internal clock */
		3825	htim->Instance->SMCR &= ~TIM_SMCR_SMS;
		3826	}
		3827	break;
		3828
		3829	case TIM_CLOCKSOURCE_ETRMODE1:
		3830	{
		3831	/* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
		3832	assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
		3833
		3834	/* Check ETR input conditioning related parameters */
		3835	assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
		3836	assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
		3837	assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
		3838
		3839	/* Configure the ETR Clock source */
		3840	TIM_ETR_SetConfig(htim->Instance,
		3841	sClockSourceConfig->ClockPrescaler,
		3842	sClockSourceConfig->ClockPolarity,
		3843	sClockSourceConfig->ClockFilter);
		3844	/* Get the TIMx SMCR register value */
		3845	tmpsmcr = htim->Instance->SMCR;
		3846	/* Reset the SMS and TS Bits */
		3847	tmpsmcr &= ~(TIM_SMCR_SMS \| TIM_SMCR_TS);
		3848	/* Select the External clock mode1 and the ETRF trigger */
		3849	tmpsmcr \|= (TIM_SLAVEMODE_EXTERNAL1 \| TIM_CLOCKSOURCE_ETRMODE1);
		3850	/* Write to TIMx SMCR */
		3851	htim->Instance->SMCR = tmpsmcr;
		3852	}
		3853	break;
		3854
		3855	case TIM_CLOCKSOURCE_ETRMODE2:
		3856	{
		3857	/* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
		3858	assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
		3859
		3860	/* Check ETR input conditioning related parameters */
		3861	assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
		3862	assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
		3863	assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
		3864
		3865	/* Configure the ETR Clock source */
		3866	TIM_ETR_SetConfig(htim->Instance,
		3867	sClockSourceConfig->ClockPrescaler,
		3868	sClockSourceConfig->ClockPolarity,
		3869	sClockSourceConfig->ClockFilter);
		3870	/* Enable the External clock mode2 */
		3871	htim->Instance->SMCR \|= TIM_SMCR_ECE;
		3872	}
		3873	break;
		3874
		3875	case TIM_CLOCKSOURCE_TI1:
		3876	{
		3877	/* Check whether or not the timer instance supports external clock mode 1 */
		3878	assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
		3879
		3880	/* Check TI1 input conditioning related parameters */
		3881	assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
		3882	assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
		3883
		3884	TIM_TI1_ConfigInputStage(htim->Instance,
		3885	sClockSourceConfig->ClockPolarity,
		3886	sClockSourceConfig->ClockFilter);
		3887	TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
		3888	}
		3889	break;
		3890	case TIM_CLOCKSOURCE_TI2:
		3891	{
		3892	/* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
		3893	assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
		3894
		3895	/* Check TI2 input conditioning related parameters */
		3896	assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
		3897	assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
		3898
		3899	TIM_TI2_ConfigInputStage(htim->Instance,
		3900	sClockSourceConfig->ClockPolarity,
		3901	sClockSourceConfig->ClockFilter);
		3902	TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
		3903	}
		3904	break;
		3905	case TIM_CLOCKSOURCE_TI1ED:
		3906	{
		3907	/* Check whether or not the timer instance supports external clock mode 1 */
		3908	assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
		3909
		3910	/* Check TI1 input conditioning related parameters */
		3911	assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
		3912	assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
		3913
		3914	TIM_TI1_ConfigInputStage(htim->Instance,
		3915	sClockSourceConfig->ClockPolarity,
		3916	sClockSourceConfig->ClockFilter);
		3917	TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
		3918	}
		3919	break;
		3920	case TIM_CLOCKSOURCE_ITR0:
		3921	{
		3922	/* Check whether or not the timer instance supports external clock mode 1 */
		3923	assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
		3924
		3925	TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
		3926	}
		3927	break;
		3928	case TIM_CLOCKSOURCE_ITR1:
		3929	{
		3930	/* Check whether or not the timer instance supports external clock mode 1 */
		3931	assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
		3932
		3933	TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
		3934	}
		3935	break;
		3936	case TIM_CLOCKSOURCE_ITR2:
		3937	{
		3938	/* Check whether or not the timer instance supports external clock mode 1 */
		3939	assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
		3940
		3941	TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
		3942	}
		3943	break;
		3944	case TIM_CLOCKSOURCE_ITR3:
		3945	{
		3946	/* Check whether or not the timer instance supports external clock mode 1 */
		3947	assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
		3948
		3949	TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
		3950	}
		3951	break;
		3952
		3953	default:
		3954	break;
		3955	}
		3956	htim->State = HAL_TIM_STATE_READY;
		3957
		3958	__HAL_UNLOCK(htim);
		3959
		3960	return HAL_OK;
		3961	}
		3962
		3963	/**
		3964	* @brief Selects the signal connected to the TI1 input: direct from CH1_input
		3965	* or a XOR combination between CH1_input, CH2_input & CH3_input
		3966	* @param htim: TIM handle.
		3967	* @param TI1_Selection: Indicate whether or not channel 1 is connected to the
		3968	* output of a XOR gate.
		3969	* This parameter can be one of the following values:
		3970	* @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
		3971	* @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
		3972	* pins are connected to the TI1 input (XOR combination)
		3973	* @retval HAL status
		3974	*/
		3975	HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
		3976	{
		3977	uint32_t tmpcr2 = 0;
		3978
		3979	/* Check the parameters */
		3980	assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
		3981	assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
		3982
		3983	/* Get the TIMx CR2 register value */
		3984	tmpcr2 = htim->Instance->CR2;
		3985
		3986	/* Reset the TI1 selection */
		3987	tmpcr2 &= ~TIM_CR2_TI1S;
		3988
		3989	/* Set the the TI1 selection */
		3990	tmpcr2 \|= TI1_Selection;
		3991
		3992	/* Write to TIMxCR2 */
		3993	htim->Instance->CR2 = tmpcr2;
		3994
		3995	return HAL_OK;
		3996	}
		3997
		3998	/**
		3999	* @brief Configures the TIM in Slave mode
		4000	* @param htim : TIM handle.
		4001	* @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
		4002	* contains the selected trigger (internal trigger input, filtered
		4003	* timer input or external trigger input) and the ) and the Slave
		4004	* mode (Disable, Reset, Gated, Trigger, External clock mode 1).
		4005	* @retval HAL status
		4006	*/
		4007	HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef htim, TIM_SlaveConfigTypeDef sSlaveConfig)
		4008	{
		4009	/* Check the parameters */
		4010	assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
		4011	assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
		4012	assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
		4013
		4014	__HAL_LOCK(htim);
		4015
		4016	htim->State = HAL_TIM_STATE_BUSY;
		4017
		4018	TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
		4019
		4020	/* Disable Trigger Interrupt */
		4021	__HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
		4022
		4023	/* Disable Trigger DMA request */
		4024	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
		4025
		4026	htim->State = HAL_TIM_STATE_READY;
		4027
		4028	__HAL_UNLOCK(htim);
		4029
		4030	return HAL_OK;
		4031	}
		4032
		4033	/**
		4034	* @brief Configures the TIM in Slave mode in interrupt mode
		4035	* @param htim: TIM handle.
		4036	* @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
		4037	* contains the selected trigger (internal trigger input, filtered
		4038	* timer input or external trigger input) and the ) and the Slave
		4039	* mode (Disable, Reset, Gated, Trigger, External clock mode 1).
		4040	* @retval HAL status
		4041	*/
		4042	HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
		4043	TIM_SlaveConfigTypeDef * sSlaveConfig)
		4044	{
		4045	/* Check the parameters */
		4046	assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
		4047	assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
		4048	assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
		4049
		4050	__HAL_LOCK(htim);
		4051
		4052	htim->State = HAL_TIM_STATE_BUSY;
		4053
		4054	TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
		4055
		4056	/* Enable Trigger Interrupt */
		4057	__HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
		4058
		4059	/* Disable Trigger DMA request */
		4060	__HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
		4061
		4062	htim->State = HAL_TIM_STATE_READY;
		4063
		4064	__HAL_UNLOCK(htim);
		4065
		4066	return HAL_OK;
		4067	}
		4068
		4069	/**
		4070	* @brief Read the captured value from Capture Compare unit
		4071	* @param htim: TIM handle.
		4072	* @param Channel : TIM Channels to be enabled
		4073	* This parameter can be one of the following values:
		4074	* @arg TIM_CHANNEL_1: TIM Channel 1 selected
		4075	* @arg TIM_CHANNEL_2: TIM Channel 2 selected
		4076	* @arg TIM_CHANNEL_3: TIM Channel 3 selected
		4077	* @arg TIM_CHANNEL_4: TIM Channel 4 selected
		4078	* @retval Captured value
		4079	*/
		4080	uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
		4081	{
		4082	uint32_t tmpreg = 0;
		4083
		4084	__HAL_LOCK(htim);
		4085
		4086	switch (Channel)
		4087	{
		4088	case TIM_CHANNEL_1:
		4089	{
		4090	/* Check the parameters */
		4091	assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
		4092
		4093	/* Return the capture 1 value */
		4094	tmpreg = htim->Instance->CCR1;
		4095
		4096	break;
		4097	}
		4098	case TIM_CHANNEL_2:
		4099	{
		4100	/* Check the parameters */
		4101	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		4102
		4103	/* Return the capture 2 value */
		4104	tmpreg = htim->Instance->CCR2;
		4105
		4106	break;
		4107	}
		4108
		4109	case TIM_CHANNEL_3:
		4110	{
		4111	/* Check the parameters */
		4112	assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
		4113
		4114	/* Return the capture 3 value */
		4115	tmpreg = htim->Instance->CCR3;
		4116
		4117	break;
		4118	}
		4119
		4120	case TIM_CHANNEL_4:
		4121	{
		4122	/* Check the parameters */
		4123	assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
		4124
		4125	/* Return the capture 4 value */
		4126	tmpreg = htim->Instance->CCR4;
		4127
		4128	break;
		4129	}
		4130
		4131	default:
		4132	break;
		4133	}
		4134
		4135	__HAL_UNLOCK(htim);
		4136	return tmpreg;
		4137	}
		4138
		4139	/**
		4140	* @}
		4141	*/
		4142
		4143	/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
		4144	* @brief TIM Callbacks functions
		4145	*
		4146	@verbatim
		4147	==============================================================================
		4148	##### TIM Callbacks functions #####
		4149	==============================================================================
		4150	[..]
		4151	This section provides TIM callback functions:
		4152	(+) Timer Period elapsed callback
		4153	(+) Timer Output Compare callback
		4154	(+) Timer Input capture callback
		4155	(+) Timer Trigger callback
		4156	(+) Timer Error callback
		4157
		4158	@endverbatim
		4159	* @{
		4160	*/
		4161
		4162	/**
		4163	* @brief Period elapsed callback in non blocking mode
		4164	* @param htim : TIM handle
		4165	* @retval None
		4166	*/
		4167	__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
		4168	{
		4169	/* Prevent unused argument(s) compilation warning */
		4170	UNUSED(htim);
		4171
		4172	/* NOTE : This function Should not be modified, when the callback is needed,
		4173	the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
		4174	*/
		4175
		4176	}
		4177	/**
		4178	* @brief Output Compare callback in non blocking mode
		4179	* @param htim : TIM OC handle
		4180	* @retval None
		4181	*/
		4182	__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
		4183	{
		4184	/* Prevent unused argument(s) compilation warning */
		4185	UNUSED(htim);
		4186
		4187	/* NOTE : This function Should not be modified, when the callback is needed,
		4188	the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
		4189	*/
		4190	}
		4191	/**
		4192	* @brief Input Capture callback in non blocking mode
		4193	* @param htim : TIM IC handle
		4194	* @retval None
		4195	*/
		4196	__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
		4197	{
		4198	/* Prevent unused argument(s) compilation warning */
		4199	UNUSED(htim);
		4200
		4201	/* NOTE : This function Should not be modified, when the callback is needed,
		4202	the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
		4203	*/
		4204	}
		4205
		4206	/**
		4207	* @brief PWM Pulse finished callback in non blocking mode
		4208	* @param htim : TIM handle
		4209	* @retval None
		4210	*/
		4211	__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
		4212	{
		4213	/* Prevent unused argument(s) compilation warning */
		4214	UNUSED(htim);
		4215
		4216	/* NOTE : This function Should not be modified, when the callback is needed,
		4217	the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
		4218	*/
		4219	}
		4220
		4221	/**
		4222	* @brief Hall Trigger detection callback in non blocking mode
		4223	* @param htim : TIM handle
		4224	* @retval None
		4225	*/
		4226	__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
		4227	{
		4228	/* Prevent unused argument(s) compilation warning */
		4229	UNUSED(htim);
		4230
		4231	/* NOTE : This function Should not be modified, when the callback is needed,
		4232	the HAL_TIM_TriggerCallback could be implemented in the user file
		4233	*/
		4234	}
		4235
		4236	/**
		4237	* @brief Timer error callback in non blocking mode
		4238	* @param htim : TIM handle
		4239	* @retval None
		4240	*/
		4241	__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
		4242	{
		4243	/* Prevent unused argument(s) compilation warning */
		4244	UNUSED(htim);
		4245
		4246	/* NOTE : This function Should not be modified, when the callback is needed,
		4247	the HAL_TIM_ErrorCallback could be implemented in the user file
		4248	*/
		4249	}
		4250
		4251	/**
		4252	* @}
		4253	*/
		4254
		4255	/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
		4256	* @brief Peripheral State functions
		4257	*
		4258	@verbatim
		4259	==============================================================================
		4260	##### Peripheral State functions #####
		4261	==============================================================================
		4262	[..]
		4263	This subsection permit to get in run-time the status of the peripheral
		4264	and the data flow.
		4265
		4266	@endverbatim
		4267	* @{
		4268	*/
		4269
		4270	/**
		4271	* @brief Return the TIM Base state
		4272	* @param htim: TIM Base handle
		4273	* @retval HAL state
		4274	*/
		4275	HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
		4276	{
		4277	return htim->State;
		4278	}
		4279
		4280	/**
		4281	* @brief Return the TIM OC state
		4282	* @param htim: TIM Ouput Compare handle
		4283	* @retval HAL state
		4284	*/
		4285	HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
		4286	{
		4287	return htim->State;
		4288	}
		4289
		4290	/**
		4291	* @brief Return the TIM PWM state
		4292	* @param htim: TIM handle
		4293	* @retval HAL state
		4294	*/
		4295	HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
		4296	{
		4297	return htim->State;
		4298	}
		4299
		4300	/**
		4301	* @brief Return the TIM Input Capture state
		4302	* @param htim: TIM IC handle
		4303	* @retval HAL state
		4304	*/
		4305	HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
		4306	{
		4307	return htim->State;
		4308	}
		4309
		4310	/**
		4311	* @brief Return the TIM One Pulse Mode state
		4312	* @param htim: TIM OPM handle
		4313	* @retval HAL state
		4314	*/
		4315	HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
		4316	{
		4317	return htim->State;
		4318	}
		4319
		4320	/**
		4321	* @brief Return the TIM Encoder Mode state
		4322	* @param htim: TIM Encoder handle
		4323	* @retval HAL state
		4324	*/
		4325	HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
		4326	{
		4327	return htim->State;
		4328	}
		4329
		4330	/**
		4331	* @brief TIM DMA error callback
		4332	* @param hdma : pointer to DMA handle.
		4333	* @retval None
		4334	*/
		4335	void TIM_DMAError(DMA_HandleTypeDef *hdma)
		4336	{
		4337	TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
		4338
		4339	htim->State= HAL_TIM_STATE_READY;
		4340
		4341	HAL_TIM_ErrorCallback(htim);
		4342	}
		4343
		4344	/**
		4345	* @brief TIM DMA Delay Pulse complete callback.
		4346	* @param hdma : pointer to DMA handle.
		4347	* @retval None
		4348	*/
		4349	void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
		4350	{
		4351	TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
		4352
		4353	htim->State= HAL_TIM_STATE_READY;
		4354
		4355	if (hdma == htim->hdma[TIM_DMA_ID_CC1])
		4356	{
		4357	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
		4358	}
		4359	else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
		4360	{
		4361	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
		4362	}
		4363	else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
		4364	{
		4365	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
		4366	}
		4367	else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
		4368	{
		4369	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
		4370	}
		4371
		4372	HAL_TIM_PWM_PulseFinishedCallback(htim);
		4373
		4374	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
		4375	}
		4376
		4377	/**
		4378	* @brief TIM DMA Capture complete callback.
		4379	* @param hdma : pointer to DMA handle.
		4380	* @retval None
		4381	*/
		4382	void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
		4383	{
		4384	TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
		4385
		4386	htim->State= HAL_TIM_STATE_READY;
		4387
		4388	if (hdma == htim->hdma[TIM_DMA_ID_CC1])
		4389	{
		4390	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
		4391	}
		4392	else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
		4393	{
		4394	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
		4395	}
		4396	else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
		4397	{
		4398	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
		4399	}
		4400	else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
		4401	{
		4402	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
		4403	}
		4404
		4405	HAL_TIM_IC_CaptureCallback(htim);
		4406
		4407	htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
		4408	}
		4409
		4410	/**
		4411	* @}
		4412	*/
		4413
		4414	/**
		4415	* @}
		4416	*/
		4417
		4418
		4419	/** @addtogroup TIM_Private_Functions
		4420	* @{
		4421	*/
		4422
		4423	/**
		4424	* @brief TIM DMA Period Elapse complete callback.
		4425	* @param hdma : pointer to DMA handle.
		4426	* @retval None
		4427	*/
		4428	static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
		4429	{
		4430	TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
		4431
		4432	htim->State= HAL_TIM_STATE_READY;
		4433
		4434	HAL_TIM_PeriodElapsedCallback(htim);
		4435	}
		4436
		4437	/**
		4438	* @brief TIM DMA Trigger callback.
		4439	* @param hdma : pointer to DMA handle.
		4440	* @retval None
		4441	*/
		4442	static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
		4443	{
		4444	TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
		4445
		4446	htim->State= HAL_TIM_STATE_READY;
		4447
		4448	HAL_TIM_TriggerCallback(htim);
		4449	}
		4450
		4451	/**
		4452	* @brief Time Base configuration
		4453	* @param TIMx: TIM periheral
		4454	* @param Structure: TIM Base configuration structure
		4455	* @retval None
		4456	*/
		4457	static void TIM_Base_SetConfig(TIM_TypeDef TIMx, TIM_Base_InitTypeDef Structure)
		4458	{
		4459	uint32_t tmpcr1 = 0;
		4460	tmpcr1 = TIMx->CR1;
		4461
		4462	/* Set TIM Time Base Unit parameters ---------------------------------------*/
		4463	if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
		4464	{
		4465	/* Select the Counter Mode */
		4466	tmpcr1 &= ~(TIM_CR1_DIR \| TIM_CR1_CMS);
		4467	tmpcr1 \|= Structure->CounterMode;
		4468	}
		4469
		4470	if(IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
		4471	{
		4472	/* Set the clock division */
		4473	tmpcr1 &= ~TIM_CR1_CKD;
		4474	tmpcr1 \|= (uint32_t)Structure->ClockDivision;
		4475	}
		4476
		4477	TIMx->CR1 = tmpcr1;
		4478
		4479	/* Set the Autoreload value */
		4480	TIMx->ARR = (uint32_t)Structure->Period ;
		4481
		4482	/* Set the Prescaler value */
		4483	TIMx->PSC = (uint32_t)Structure->Prescaler;
		4484
		4485	/* Generate an update event to reload the Prescaler */
		4486	TIMx->EGR = TIM_EGR_UG;
		4487	}
		4488
		4489	/**
		4490	* @brief Time Ouput Compare 1 configuration
		4491	* @param TIMx to select the TIM peripheral
		4492	* @param OC_Config: The ouput configuration structure
		4493	* @retval None
		4494	*/
		4495	static void TIM_OC1_SetConfig(TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
		4496	{
		4497	uint32_t tmpccmrx = 0;
		4498	uint32_t tmpccer = 0;
		4499	uint32_t tmpcr2 = 0;
		4500
		4501	/* Disable the Channel 1: Reset the CC1E Bit */
		4502	TIMx->CCER &= ~TIM_CCER_CC1E;
		4503
		4504	/* Get the TIMx CCER register value */
		4505	tmpccer = TIMx->CCER;
		4506	/* Get the TIMx CR2 register value */
		4507	tmpcr2 = TIMx->CR2;
		4508
		4509	/* Get the TIMx CCMR1 register value */
		4510	tmpccmrx = TIMx->CCMR1;
		4511
		4512	/* Reset the Output Compare Mode Bits */
		4513	tmpccmrx &= ~TIM_CCMR1_OC1M;
		4514	tmpccmrx &= ~TIM_CCMR1_CC1S;
		4515	/* Select the Output Compare Mode */
		4516	tmpccmrx \|= OC_Config->OCMode;
		4517
		4518	/* Reset the Output Polarity level */
		4519	tmpccer &= ~TIM_CCER_CC1P;
		4520	/* Set the Output Compare Polarity */
		4521	tmpccer \|= OC_Config->OCPolarity;
		4522
		4523	/* Write to TIMx CR2 */
		4524	TIMx->CR2 = tmpcr2;
		4525
		4526	/* Write to TIMx CCMR1 */
		4527	TIMx->CCMR1 = tmpccmrx;
		4528
		4529	/* Set the Capture Compare Register value */
		4530	TIMx->CCR1 = OC_Config->Pulse;
		4531
		4532	/* Write to TIMx CCER */
		4533	TIMx->CCER = tmpccer;
		4534	}
		4535
		4536	/**
		4537	* @brief Time Ouput Compare 2 configuration
		4538	* @param TIMx to select the TIM peripheral
		4539	* @param OC_Config: The ouput configuration structure
		4540	* @retval None
		4541	*/
		4542	static void TIM_OC2_SetConfig(TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
		4543	{
		4544	uint32_t tmpccmrx = 0;
		4545	uint32_t tmpccer = 0;
		4546	uint32_t tmpcr2 = 0;
		4547
		4548	/* Disable the Channel 2: Reset the CC2E Bit */
		4549	TIMx->CCER &= ~TIM_CCER_CC2E;
		4550
		4551	/* Get the TIMx CCER register value */
		4552	tmpccer = TIMx->CCER;
		4553	/* Get the TIMx CR2 register value */
		4554	tmpcr2 = TIMx->CR2;
		4555
		4556	/* Get the TIMx CCMR1 register value */
		4557	tmpccmrx = TIMx->CCMR1;
		4558
		4559	/* Reset the Output Compare mode and Capture/Compare selection Bits */
		4560	tmpccmrx &= ~TIM_CCMR1_OC2M;
		4561	tmpccmrx &= ~TIM_CCMR1_CC2S;
		4562
		4563	/* Select the Output Compare Mode */
		4564	tmpccmrx \|= (OC_Config->OCMode << 8);
		4565
		4566	/* Reset the Output Polarity level */
		4567	tmpccer &= ~TIM_CCER_CC2P;
		4568	/* Set the Output Compare Polarity */
		4569	tmpccer \|= (OC_Config->OCPolarity << 4);
		4570
		4571	/* Write to TIMx CR2 */
		4572	TIMx->CR2 = tmpcr2;
		4573
		4574	/* Write to TIMx CCMR1 */
		4575	TIMx->CCMR1 = tmpccmrx;
		4576
		4577	/* Set the Capture Compare Register value */
		4578	TIMx->CCR2 = OC_Config->Pulse;
		4579
		4580	/* Write to TIMx CCER */
		4581	TIMx->CCER = tmpccer;
		4582	}
		4583
		4584	/**
		4585	* @brief Time Ouput Compare 3 configuration
		4586	* @param TIMx to select the TIM peripheral
		4587	* @param OC_Config: The ouput configuration structure
		4588	* @retval None
		4589	*/
		4590	static void TIM_OC3_SetConfig(TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
		4591	{
		4592	uint32_t tmpccmrx = 0;
		4593	uint32_t tmpccer = 0;
		4594	uint32_t tmpcr2 = 0;
		4595
		4596	/* Disable the Channel 3: Reset the CC2E Bit */
		4597	TIMx->CCER &= ~TIM_CCER_CC3E;
		4598
		4599	/* Get the TIMx CCER register value */
		4600	tmpccer = TIMx->CCER;
		4601	/* Get the TIMx CR2 register value */
		4602	tmpcr2 = TIMx->CR2;
		4603
		4604	/* Get the TIMx CCMR2 register value */
		4605	tmpccmrx = TIMx->CCMR2;
		4606
		4607	/* Reset the Output Compare mode and Capture/Compare selection Bits */
		4608	tmpccmrx &= ~TIM_CCMR2_OC3M;
		4609	tmpccmrx &= ~TIM_CCMR2_CC3S;
		4610	/* Select the Output Compare Mode */
		4611	tmpccmrx \|= OC_Config->OCMode;
		4612
		4613	/* Reset the Output Polarity level */
		4614	tmpccer &= ~TIM_CCER_CC3P;
		4615	/* Set the Output Compare Polarity */
		4616	tmpccer \|= (OC_Config->OCPolarity << 8);
		4617
		4618	/* Write to TIMx CR2 */
		4619	TIMx->CR2 = tmpcr2;
		4620
		4621	/* Write to TIMx CCMR2 */
		4622	TIMx->CCMR2 = tmpccmrx;
		4623
		4624	/* Set the Capture Compare Register value */
		4625	TIMx->CCR3 = OC_Config->Pulse;
		4626
		4627	/* Write to TIMx CCER */
		4628	TIMx->CCER = tmpccer;
		4629	}
		4630
		4631	/**
		4632	* @brief Time Ouput Compare 4 configuration
		4633	* @param TIMx to select the TIM peripheral
		4634	* @param OC_Config: The ouput configuration structure
		4635	* @retval None
		4636	*/
		4637	static void TIM_OC4_SetConfig(TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
		4638	{
		4639	uint32_t tmpccmrx = 0;
		4640	uint32_t tmpccer = 0;
		4641	uint32_t tmpcr2 = 0;
		4642
		4643	/* Disable the Channel 4: Reset the CC4E Bit */
		4644	TIMx->CCER &= ~TIM_CCER_CC4E;
		4645
		4646	/* Get the TIMx CCER register value */
		4647	tmpccer = TIMx->CCER;
		4648	/* Get the TIMx CR2 register value */
		4649	tmpcr2 = TIMx->CR2;
		4650
		4651	/* Get the TIMx CCMR2 register value */
		4652	tmpccmrx = TIMx->CCMR2;
		4653
		4654	/* Reset the Output Compare mode and Capture/Compare selection Bits */
		4655	tmpccmrx &= ~TIM_CCMR2_OC4M;
		4656	tmpccmrx &= ~TIM_CCMR2_CC4S;
		4657
		4658	/* Select the Output Compare Mode */
		4659	tmpccmrx \|= (OC_Config->OCMode << 8);
		4660
		4661	/* Reset the Output Polarity level */
		4662	tmpccer &= ~TIM_CCER_CC4P;
		4663	/* Set the Output Compare Polarity */
		4664	tmpccer \|= (OC_Config->OCPolarity << 12);
		4665
		4666	/* Write to TIMx CR2 */
		4667	TIMx->CR2 = tmpcr2;
		4668
		4669	/* Write to TIMx CCMR2 */
		4670	TIMx->CCMR2 = tmpccmrx;
		4671
		4672	/* Set the Capture Compare Register value */
		4673	TIMx->CCR4 = OC_Config->Pulse;
		4674
		4675	/* Write to TIMx CCER */
		4676	TIMx->CCER = tmpccer;
		4677	}
		4678
		4679
		4680	/**
		4681	* @brief Time Slave configuration
		4682	* @param htim: pointer to a TIM_HandleTypeDef structure that contains
		4683	* the configuration information for TIM module.
		4684	* @param sSlaveConfig: The slave configuration structure
		4685	* @retval None
		4686	*/
		4687	static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
		4688	TIM_SlaveConfigTypeDef * sSlaveConfig)
		4689	{
		4690	uint32_t tmpsmcr = 0;
		4691	uint32_t tmpccmr1 = 0;
		4692	uint32_t tmpccer = 0;
		4693
		4694	/* Get the TIMx SMCR register value */
		4695	tmpsmcr = htim->Instance->SMCR;
		4696
		4697	/* Reset the Trigger Selection Bits */
		4698	tmpsmcr &= ~TIM_SMCR_TS;
		4699	/* Set the Input Trigger source */
		4700	tmpsmcr \|= sSlaveConfig->InputTrigger;
		4701
		4702	/* Reset the slave mode Bits */
		4703	tmpsmcr &= ~TIM_SMCR_SMS;
		4704	/* Set the slave mode */
		4705	tmpsmcr \|= sSlaveConfig->SlaveMode;
		4706
		4707	/* Write to TIMx SMCR */
		4708	htim->Instance->SMCR = tmpsmcr;
		4709
		4710	/* Configure the trigger prescaler, filter, and polarity */
		4711	switch (sSlaveConfig->InputTrigger)
		4712	{
		4713	case TIM_TS_ETRF:
		4714	{
		4715	/* Check the parameters */
		4716	assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
		4717	assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
		4718	assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
		4719	assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
		4720	/* Configure the ETR Trigger source */
		4721	TIM_ETR_SetConfig(htim->Instance,
		4722	sSlaveConfig->TriggerPrescaler,
		4723	sSlaveConfig->TriggerPolarity,
		4724	sSlaveConfig->TriggerFilter);
		4725	}
		4726	break;
		4727
		4728	case TIM_TS_TI1F_ED:
		4729	{
		4730	/* Check the parameters */
		4731	assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
		4732	assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
		4733
		4734	/* Disable the Channel 1: Reset the CC1E Bit */
		4735	tmpccer = htim->Instance->CCER;
		4736	htim->Instance->CCER &= ~TIM_CCER_CC1E;
		4737	tmpccmr1 = htim->Instance->CCMR1;
		4738
		4739	/* Set the filter */
		4740	tmpccmr1 &= ~TIM_CCMR1_IC1F;
		4741	tmpccmr1 \|= ((sSlaveConfig->TriggerFilter) << 4);
		4742
		4743	/* Write to TIMx CCMR1 and CCER registers */
		4744	htim->Instance->CCMR1 = tmpccmr1;
		4745	htim->Instance->CCER = tmpccer;
		4746
		4747	}
		4748	break;
		4749
		4750	case TIM_TS_TI1FP1:
		4751	{
		4752	/* Check the parameters */
		4753	assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
		4754	assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
		4755	assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
		4756
		4757	/* Configure TI1 Filter and Polarity */
		4758	TIM_TI1_ConfigInputStage(htim->Instance,
		4759	sSlaveConfig->TriggerPolarity,
		4760	sSlaveConfig->TriggerFilter);
		4761	}
		4762	break;
		4763
		4764	case TIM_TS_TI2FP2:
		4765	{
		4766	/* Check the parameters */
		4767	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		4768	assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
		4769	assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
		4770
		4771	/* Configure TI2 Filter and Polarity */
		4772	TIM_TI2_ConfigInputStage(htim->Instance,
		4773	sSlaveConfig->TriggerPolarity,
		4774	sSlaveConfig->TriggerFilter);
		4775	}
		4776	break;
		4777
		4778	case TIM_TS_ITR0:
		4779	{
		4780	/* Check the parameter */
		4781	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		4782	}
		4783	break;
		4784
		4785	case TIM_TS_ITR1:
		4786	{
		4787	/* Check the parameter */
		4788	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		4789	}
		4790	break;
		4791
		4792	case TIM_TS_ITR2:
		4793	{
		4794	/* Check the parameter */
		4795	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		4796	}
		4797	break;
		4798
		4799	case TIM_TS_ITR3:
		4800	{
		4801	/* Check the parameter */
		4802	assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
		4803	}
		4804	break;
		4805
		4806	default:
		4807	break;
		4808	}
		4809	}
		4810
		4811	/**
		4812	* @brief Configure the TI1 as Input.
		4813	* @param TIMx to select the TIM peripheral.
		4814	* @param TIM_ICPolarity : The Input Polarity.
		4815	* This parameter can be one of the following values:
		4816	* @arg TIM_ICPOLARITY_RISING
		4817	* @arg TIM_ICPOLARITY_FALLING
		4818	* @arg TIM_ICPOLARITY_BOTHEDGE
		4819	* @param TIM_ICSelection: specifies the input to be used.
		4820	* This parameter can be one of the following values:
		4821	* @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1.
		4822	* @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2.
		4823	* @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC.
		4824	* @param TIM_ICFilter: Specifies the Input Capture Filter.
		4825	* This parameter must be a value between 0x00 and 0x0F.
		4826	* @retval None
		4827	* @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
		4828	* (on channel2 path) is used as the input signal. Therefore CCMR1 must be
		4829	* protected against un-initialized filter and polarity values.
		4830	*/
		4831	static void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
		4832	uint32_t TIM_ICFilter)
		4833	{
		4834	uint32_t tmpccmr1 = 0;
		4835	uint32_t tmpccer = 0;
		4836
		4837	/* Disable the Channel 1: Reset the CC1E Bit */
		4838	TIMx->CCER &= ~TIM_CCER_CC1E;
		4839	tmpccmr1 = TIMx->CCMR1;
		4840	tmpccer = TIMx->CCER;
		4841
		4842	/* Select the Input */
		4843	if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
		4844	{
		4845	tmpccmr1 &= ~TIM_CCMR1_CC1S;
		4846	tmpccmr1 \|= TIM_ICSelection;
		4847	}
		4848	else
		4849	{
		4850	tmpccmr1 \|= TIM_CCMR1_CC1S_0;
		4851	}
		4852
		4853	/* Set the filter */
		4854	tmpccmr1 &= ~TIM_CCMR1_IC1F;
		4855	tmpccmr1 \|= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
		4856
		4857	/* Select the Polarity and set the CC1E Bit */
		4858	tmpccer &= ~(TIM_CCER_CC1P \| TIM_CCER_CC1NP);
		4859	tmpccer \|= (TIM_ICPolarity & (TIM_CCER_CC1P \| TIM_CCER_CC1NP));
		4860
		4861	/* Write to TIMx CCMR1 and CCER registers */
		4862	TIMx->CCMR1 = tmpccmr1;
		4863	TIMx->CCER = tmpccer;
		4864	}
		4865
		4866	/**
		4867	* @brief Configure the Polarity and Filter for TI1.
		4868	* @param TIMx to select the TIM peripheral.
		4869	* @param TIM_ICPolarity : The Input Polarity.
		4870	* This parameter can be one of the following values:
		4871	* @arg TIM_ICPOLARITY_RISING
		4872	* @arg TIM_ICPOLARITY_FALLING
		4873	* @arg TIM_ICPOLARITY_BOTHEDGE
		4874	* @param TIM_ICFilter: Specifies the Input Capture Filter.
		4875	* This parameter must be a value between 0x00 and 0x0F.
		4876	* @retval None
		4877	*/
		4878	static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
		4879	{
		4880	uint32_t tmpccmr1 = 0;
		4881	uint32_t tmpccer = 0;
		4882
		4883	/* Disable the Channel 1: Reset the CC1E Bit */
		4884	tmpccer = TIMx->CCER;
		4885	TIMx->CCER &= ~TIM_CCER_CC1E;
		4886	tmpccmr1 = TIMx->CCMR1;
		4887
		4888	/* Set the filter */
		4889	tmpccmr1 &= ~TIM_CCMR1_IC1F;
		4890	tmpccmr1 \|= (TIM_ICFilter << 4);
		4891
		4892	/* Select the Polarity and set the CC1E Bit */
		4893	tmpccer &= ~(TIM_CCER_CC1P \| TIM_CCER_CC1NP);
		4894	tmpccer \|= TIM_ICPolarity;
		4895
		4896	/* Write to TIMx CCMR1 and CCER registers */
		4897	TIMx->CCMR1 = tmpccmr1;
		4898	TIMx->CCER = tmpccer;
		4899	}
		4900
		4901	/**
		4902	* @brief Configure the TI2 as Input.
		4903	* @param TIMx to select the TIM peripheral
		4904	* @param TIM_ICPolarity : The Input Polarity.
		4905	* This parameter can be one of the following values:
		4906	* @arg TIM_ICPOLARITY_RISING
		4907	* @arg TIM_ICPOLARITY_FALLING
		4908	* @arg TIM_ICPOLARITY_BOTHEDGE
		4909	* @param TIM_ICSelection: specifies the input to be used.
		4910	* This parameter can be one of the following values:
		4911	* @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2.
		4912	* @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1.
		4913	* @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC.
		4914	* @param TIM_ICFilter: Specifies the Input Capture Filter.
		4915	* This parameter must be a value between 0x00 and 0x0F.
		4916	* @retval None
		4917	* @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
		4918	* (on channel1 path) is used as the input signal. Therefore CCMR1 must be
		4919	* protected against un-initialized filter and polarity values.
		4920	*/
		4921	static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
		4922	uint32_t TIM_ICFilter)
		4923	{
		4924	uint32_t tmpccmr1 = 0;
		4925	uint32_t tmpccer = 0;
		4926
		4927	/* Disable the Channel 2: Reset the CC2E Bit */
		4928	TIMx->CCER &= ~TIM_CCER_CC2E;
		4929	tmpccmr1 = TIMx->CCMR1;
		4930	tmpccer = TIMx->CCER;
		4931
		4932	/* Select the Input */
		4933	tmpccmr1 &= ~TIM_CCMR1_CC2S;
		4934	tmpccmr1 \|= (TIM_ICSelection << 8);
		4935
		4936	/* Set the filter */
		4937	tmpccmr1 &= ~TIM_CCMR1_IC2F;
		4938	tmpccmr1 \|= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
		4939
		4940	/* Select the Polarity and set the CC2E Bit */
		4941	tmpccer &= ~(TIM_CCER_CC2P \| TIM_CCER_CC2NP);
		4942	tmpccer \|= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P \| TIM_CCER_CC2NP));
		4943
		4944	/* Write to TIMx CCMR1 and CCER registers */
		4945	TIMx->CCMR1 = tmpccmr1 ;
		4946	TIMx->CCER = tmpccer;
		4947	}
		4948
		4949	/**
		4950	* @brief Configure the Polarity and Filter for TI2.
		4951	* @param TIMx to select the TIM peripheral.
		4952	* @param TIM_ICPolarity : The Input Polarity.
		4953	* This parameter can be one of the following values:
		4954	* @arg TIM_ICPOLARITY_RISING
		4955	* @arg TIM_ICPOLARITY_FALLING
		4956	* @arg TIM_ICPOLARITY_BOTHEDGE
		4957	* @param TIM_ICFilter: Specifies the Input Capture Filter.
		4958	* This parameter must be a value between 0x00 and 0x0F.
		4959	* @retval None
		4960	*/
		4961	static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
		4962	{
		4963	uint32_t tmpccmr1 = 0;
		4964	uint32_t tmpccer = 0;
		4965
		4966	/* Disable the Channel 2: Reset the CC2E Bit */
		4967	TIMx->CCER &= ~TIM_CCER_CC2E;
		4968	tmpccmr1 = TIMx->CCMR1;
		4969	tmpccer = TIMx->CCER;
		4970
		4971	/* Set the filter */
		4972	tmpccmr1 &= ~TIM_CCMR1_IC2F;
		4973	tmpccmr1 \|= (TIM_ICFilter << 12);
		4974
		4975	/* Select the Polarity and set the CC2E Bit */
		4976	tmpccer &= ~(TIM_CCER_CC2P \| TIM_CCER_CC2NP);
		4977	tmpccer \|= (TIM_ICPolarity << 4);
		4978
		4979	/* Write to TIMx CCMR1 and CCER registers */
		4980	TIMx->CCMR1 = tmpccmr1 ;
		4981	TIMx->CCER = tmpccer;
		4982	}
		4983
		4984	/**
		4985	* @brief Configure the TI3 as Input.
		4986	* @param TIMx to select the TIM peripheral
		4987	* @param TIM_ICPolarity : The Input Polarity.
		4988	* This parameter can be one of the following values:
		4989	* @arg TIM_ICPOLARITY_RISING
		4990	* @arg TIM_ICPOLARITY_FALLING
		4991	* @arg TIM_ICPOLARITY_BOTHEDGE
		4992	* @param TIM_ICSelection: specifies the input to be used.
		4993	* This parameter can be one of the following values:
		4994	* @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3.
		4995	* @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4.
		4996	* @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC.
		4997	* @param TIM_ICFilter: Specifies the Input Capture Filter.
		4998	* This parameter must be a value between 0x00 and 0x0F.
		4999	* @retval None
		5000	* @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
		5001	* (on channel1 path) is used as the input signal. Therefore CCMR2 must be
		5002	* protected against un-initialized filter and polarity values.
		5003	*/
		5004	static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
		5005	uint32_t TIM_ICFilter)
		5006	{
		5007	uint32_t tmpccmr2 = 0;
		5008	uint32_t tmpccer = 0;
		5009
		5010	/* Disable the Channel 3: Reset the CC3E Bit */
		5011	TIMx->CCER &= ~TIM_CCER_CC3E;
		5012	tmpccmr2 = TIMx->CCMR2;
		5013	tmpccer = TIMx->CCER;
		5014
		5015	/* Select the Input */
		5016	tmpccmr2 &= ~TIM_CCMR2_CC3S;
		5017	tmpccmr2 \|= TIM_ICSelection;
		5018
		5019	/* Set the filter */
		5020	tmpccmr2 &= ~TIM_CCMR2_IC3F;
		5021	tmpccmr2 \|= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
		5022
		5023	/* Select the Polarity and set the CC3E Bit */
		5024	tmpccer &= ~(TIM_CCER_CC3P \| TIM_CCER_CC3NP);
		5025	tmpccer \|= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P \| TIM_CCER_CC3NP));
		5026
		5027	/* Write to TIMx CCMR2 and CCER registers */
		5028	TIMx->CCMR2 = tmpccmr2;
		5029	TIMx->CCER = tmpccer;
		5030	}
		5031
		5032	/**
		5033	* @brief Configure the TI4 as Input.
		5034	* @param TIMx to select the TIM peripheral
		5035	* @param TIM_ICPolarity : The Input Polarity.
		5036	* This parameter can be one of the following values:
		5037	* @arg TIM_ICPOLARITY_RISING
		5038	* @arg TIM_ICPOLARITY_FALLING
		5039	* @arg TIM_ICPOLARITY_BOTHEDGE
		5040	* @param TIM_ICSelection: specifies the input to be used.
		5041	* This parameter can be one of the following values:
		5042	* @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4.
		5043	* @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3.
		5044	* @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC.
		5045	* @param TIM_ICFilter: Specifies the Input Capture Filter.
		5046	* This parameter must be a value between 0x00 and 0x0F.
		5047	* @retval None
		5048	* @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
		5049	* (on channel1 path) is used as the input signal. Therefore CCMR2 must be
		5050	* protected against un-initialized filter and polarity values.
		5051	*/
		5052	static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
		5053	uint32_t TIM_ICFilter)
		5054	{
		5055	uint32_t tmpccmr2 = 0;
		5056	uint32_t tmpccer = 0;
		5057
		5058	/* Disable the Channel 4: Reset the CC4E Bit */
		5059	TIMx->CCER &= ~TIM_CCER_CC4E;
		5060	tmpccmr2 = TIMx->CCMR2;
		5061	tmpccer = TIMx->CCER;
		5062
		5063	/* Select the Input */
		5064	tmpccmr2 &= ~TIM_CCMR2_CC4S;
		5065	tmpccmr2 \|= (TIM_ICSelection << 8);
		5066
		5067	/* Set the filter */
		5068	tmpccmr2 &= ~TIM_CCMR2_IC4F;
		5069	tmpccmr2 \|= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
		5070
		5071	/* Select the Polarity and set the CC4E Bit */
		5072	tmpccer &= ~(TIM_CCER_CC4P \| TIM_CCER_CC4NP);
		5073	tmpccer \|= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P \| TIM_CCER_CC4NP));
		5074
		5075	/* Write to TIMx CCMR2 and CCER registers */
		5076	TIMx->CCMR2 = tmpccmr2;
		5077	TIMx->CCER = tmpccer ;
		5078	}
		5079
		5080	/**
		5081	* @brief Selects the Input Trigger source
		5082	* @param TIMx to select the TIM peripheral
		5083	* @param InputTriggerSource: The Input Trigger source.
		5084	* This parameter can be one of the following values:
		5085	* @arg TIM_TS_ITR0: Internal Trigger 0
		5086	* @arg TIM_TS_ITR1: Internal Trigger 1
		5087	* @arg TIM_TS_ITR2: Internal Trigger 2
		5088	* @arg TIM_TS_ITR3: Internal Trigger 3
		5089	* @arg TIM_TS_TI1F_ED: TI1 Edge Detector
		5090	* @arg TIM_TS_TI1FP1: Filtered Timer Input 1
		5091	* @arg TIM_TS_TI2FP2: Filtered Timer Input 2
		5092	* @arg TIM_TS_ETRF: External Trigger input
		5093	* @retval None
		5094	*/
		5095	static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t InputTriggerSource)
		5096	{
		5097	uint32_t tmpsmcr = 0;
		5098
		5099	/* Get the TIMx SMCR register value */
		5100	tmpsmcr = TIMx->SMCR;
		5101	/* Reset the TS Bits */
		5102	tmpsmcr &= ~TIM_SMCR_TS;
		5103	/* Set the Input Trigger source and the slave mode*/
		5104	tmpsmcr \|= InputTriggerSource \| TIM_SLAVEMODE_EXTERNAL1;
		5105	/* Write to TIMx SMCR */
		5106	TIMx->SMCR = tmpsmcr;
		5107	}
		5108	/**
		5109	* @brief Configures the TIMx External Trigger (ETR).
		5110	* @param TIMx to select the TIM peripheral
		5111	* @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
		5112	* This parameter can be one of the following values:
		5113	* @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF.
		5114	* @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2.
		5115	* @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4.
		5116	* @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8.
		5117	* @param TIM_ExtTRGPolarity: The external Trigger Polarity.
		5118	* This parameter can be one of the following values:
		5119	* @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active.
		5120	* @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active.
		5121	* @param ExtTRGFilter: External Trigger Filter.
		5122	* This parameter must be a value between 0x00 and 0x0F
		5123	* @retval None
		5124	*/
		5125	static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
		5126	uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
		5127	{
		5128	uint32_t tmpsmcr = 0;
		5129
		5130	tmpsmcr = TIMx->SMCR;
		5131
		5132	/* Reset the ETR Bits */
		5133	tmpsmcr &= (uint32_t)(~(TIM_SMCR_ETF \| TIM_SMCR_ETPS \| TIM_SMCR_ECE \| TIM_SMCR_ETP));
		5134
		5135	/* Set the Prescaler, the Filter value and the Polarity */
		5136	tmpsmcr \|= (uint32_t)(TIM_ExtTRGPrescaler \| (TIM_ExtTRGPolarity \| (ExtTRGFilter << 8)));
		5137
		5138	/* Write to TIMx SMCR */
		5139	TIMx->SMCR = tmpsmcr;
		5140	}
		5141
		5142	/**
		5143	* @brief Enables or disables the TIM Capture Compare Channel x.
		5144	* @param TIMx to select the TIM peripheral
		5145	* @param Channel: specifies the TIM Channel
		5146	* This parameter can be one of the following values:
		5147	* @arg TIM_CHANNEL_1: TIM Channel 1
		5148	* @arg TIM_CHANNEL_2: TIM Channel 2
		5149	* @arg TIM_CHANNEL_3: TIM Channel 3
		5150	* @arg TIM_CHANNEL_4: TIM Channel 4
		5151	* @param ChannelState: specifies the TIM Channel CCxE bit new state.
		5152	* This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
		5153	* @retval None
		5154	*/
		5155	static void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
		5156	{
		5157	uint32_t tmp = 0;
		5158
		5159	/* Check the parameters */
		5160	assert_param(IS_TIM_CC1_INSTANCE(TIMx));
		5161	assert_param(IS_TIM_CHANNELS(Channel));
		5162
		5163	tmp = TIM_CCER_CC1E << Channel;
		5164
		5165	/* Reset the CCxE Bit */
		5166	TIMx->CCER &= ~tmp;
		5167
		5168	/* Set or reset the CCxE Bit */
		5169	TIMx->CCER \|= (uint32_t)(ChannelState << Channel);
		5170	}
		5171
		5172	/**
		5173	* @}
		5174	*/
		5175
		5176	#endif /* HAL_TIM_MODULE_ENABLED */
		5177	/**
		5178	* @}
		5179	*/
		5180
		5181	/**
		5182	* @}
		5183	*/
		5184	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Subversion Repositories DashDisplay

(root)/branches/Dashboard_L152_v2/Drivers/STM32L1xx_HAL_Driver/Src/stm32l1xx_hal_tim.c – Rev 49