Go to most recent revision | Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 56 | mjames | 1 | /** |
| 2 | ****************************************************************************** |
||
| 3 | * @file stm32l1xx_ll_pwr.h |
||
| 4 | * @author MCD Application Team |
||
| 5 | * @brief Header file of PWR LL module. |
||
| 6 | ****************************************************************************** |
||
| 7 | * @attention |
||
| 8 | * |
||
| 9 | * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
||
| 10 | * All rights reserved.</center></h2> |
||
| 11 | * |
||
| 12 | * This software component is licensed by ST under BSD 3-Clause license, |
||
| 13 | * the "License"; You may not use this file except in compliance with the |
||
| 14 | * License. You may obtain a copy of the License at: |
||
| 15 | * opensource.org/licenses/BSD-3-Clause |
||
| 16 | * |
||
| 17 | ****************************************************************************** |
||
| 18 | */ |
||
| 19 | |||
| 20 | /* Define to prevent recursive inclusion -------------------------------------*/ |
||
| 21 | #ifndef __STM32L1xx_LL_PWR_H |
||
| 22 | #define __STM32L1xx_LL_PWR_H |
||
| 23 | |||
| 24 | #ifdef __cplusplus |
||
| 25 | extern "C" { |
||
| 26 | #endif |
||
| 27 | |||
| 28 | /* Includes ------------------------------------------------------------------*/ |
||
| 29 | #include "stm32l1xx.h" |
||
| 30 | |||
| 31 | /** @addtogroup STM32L1xx_LL_Driver |
||
| 32 | * @{ |
||
| 33 | */ |
||
| 34 | |||
| 35 | #if defined(PWR) |
||
| 36 | |||
| 37 | /** @defgroup PWR_LL PWR |
||
| 38 | * @{ |
||
| 39 | */ |
||
| 40 | |||
| 41 | /* Private types -------------------------------------------------------------*/ |
||
| 42 | /* Private variables ---------------------------------------------------------*/ |
||
| 43 | /* Private constants ---------------------------------------------------------*/ |
||
| 44 | /* Private macros ------------------------------------------------------------*/ |
||
| 45 | /* Exported types ------------------------------------------------------------*/ |
||
| 46 | /* Exported constants --------------------------------------------------------*/ |
||
| 47 | /** @defgroup PWR_LL_Exported_Constants PWR Exported Constants |
||
| 48 | * @{ |
||
| 49 | */ |
||
| 50 | |||
| 51 | /** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines |
||
| 52 | * @brief Flags defines which can be used with LL_PWR_WriteReg function |
||
| 53 | * @{ |
||
| 54 | */ |
||
| 55 | #define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */ |
||
| 56 | #define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */ |
||
| 57 | /** |
||
| 58 | * @} |
||
| 59 | */ |
||
| 60 | |||
| 61 | /** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines |
||
| 62 | * @brief Flags defines which can be used with LL_PWR_ReadReg function |
||
| 63 | * @{ |
||
| 64 | */ |
||
| 65 | #define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */ |
||
| 66 | #define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */ |
||
| 67 | #if defined(PWR_PVD_SUPPORT) |
||
| 68 | #define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */ |
||
| 69 | #endif /* PWR_PVD_SUPPORT */ |
||
| 70 | #if defined(PWR_CSR_VREFINTRDYF) |
||
| 71 | #define LL_PWR_CSR_VREFINTRDYF PWR_CSR_VREFINTRDYF /*!< VREFINT ready flag */ |
||
| 72 | #endif /* PWR_CSR_VREFINTRDYF */ |
||
| 73 | #define LL_PWR_CSR_VOS PWR_CSR_VOSF /*!< Voltage scaling select flag */ |
||
| 74 | #define LL_PWR_CSR_REGLPF PWR_CSR_REGLPF /*!< Regulator low power flag */ |
||
| 75 | #define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */ |
||
| 76 | #define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */ |
||
| 77 | #if defined(PWR_CSR_EWUP3) |
||
| 78 | #define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */ |
||
| 79 | #endif /* PWR_CSR_EWUP3 */ |
||
| 80 | /** |
||
| 81 | * @} |
||
| 82 | */ |
||
| 83 | |||
| 84 | /** @defgroup PWR_LL_EC_REGU_VOLTAGE Regulator Voltage |
||
| 85 | * @{ |
||
| 86 | */ |
||
| 87 | #define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR_VOS_0) /*!< 1.8V (range 1) */ |
||
| 88 | #define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR_VOS_1) /*!< 1.5V (range 2) */ |
||
| 89 | #define LL_PWR_REGU_VOLTAGE_SCALE3 (PWR_CR_VOS_0 | PWR_CR_VOS_1) /*!< 1.2V (range 3) */ |
||
| 90 | /** |
||
| 91 | * @} |
||
| 92 | */ |
||
| 93 | |||
| 94 | /** @defgroup PWR_LL_EC_MODE_PWR Mode Power |
||
| 95 | * @{ |
||
| 96 | */ |
||
| 97 | #define LL_PWR_MODE_STOP 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */ |
||
| 98 | #define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */ |
||
| 99 | /** |
||
| 100 | * @} |
||
| 101 | */ |
||
| 102 | |||
| 103 | /** @defgroup PWR_LL_EC_REGU_MODE_LP_MODES Regulator Mode In Low Power Modes |
||
| 104 | * @{ |
||
| 105 | */ |
||
| 106 | #define LL_PWR_REGU_LPMODES_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep/sleep/low-power run mode */ |
||
| 107 | #define LL_PWR_REGU_LPMODES_LOW_POWER (PWR_CR_LPSDSR) /*!< Voltage Regulator in low-power mode during deepsleep/sleep/low-power run mode */ |
||
| 108 | /** |
||
| 109 | * @} |
||
| 110 | */ |
||
| 111 | #if defined(PWR_CR_LPDS) |
||
| 112 | /** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode |
||
| 113 | * @{ |
||
| 114 | */ |
||
| 115 | #define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ |
||
| 116 | #define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */ |
||
| 117 | /** |
||
| 118 | * @} |
||
| 119 | */ |
||
| 120 | #endif /* PWR_CR_LPDS */ |
||
| 121 | |||
| 122 | #if defined(PWR_PVD_SUPPORT) |
||
| 123 | /** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level |
||
| 124 | * @{ |
||
| 125 | */ |
||
| 126 | #define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold detected by PVD 1.9 V */ |
||
| 127 | #define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold detected by PVD 2.1 V */ |
||
| 128 | #define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold detected by PVD 2.3 V */ |
||
| 129 | #define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold detected by PVD 2.5 V */ |
||
| 130 | #define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold detected by PVD 2.7 V */ |
||
| 131 | #define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold detected by PVD 2.9 V */ |
||
| 132 | #define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold detected by PVD 3.1 V */ |
||
| 133 | #define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< External input analog voltage (Compare internally to VREFINT) */ |
||
| 134 | /** |
||
| 135 | * @} |
||
| 136 | */ |
||
| 137 | #endif /* PWR_PVD_SUPPORT */ |
||
| 138 | /** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins |
||
| 139 | * @{ |
||
| 140 | */ |
||
| 141 | #define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */ |
||
| 142 | #define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC13 */ |
||
| 143 | #if defined(PWR_CSR_EWUP3) |
||
| 144 | #define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PE6 or PA2 according to device */ |
||
| 145 | #endif /* PWR_CSR_EWUP3 */ |
||
| 146 | /** |
||
| 147 | * @} |
||
| 148 | */ |
||
| 149 | |||
| 150 | /** |
||
| 151 | * @} |
||
| 152 | */ |
||
| 153 | |||
| 154 | |||
| 155 | /* Exported macro ------------------------------------------------------------*/ |
||
| 156 | /** @defgroup PWR_LL_Exported_Macros PWR Exported Macros |
||
| 157 | * @{ |
||
| 158 | */ |
||
| 159 | |||
| 160 | /** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros |
||
| 161 | * @{ |
||
| 162 | */ |
||
| 163 | |||
| 164 | /** |
||
| 165 | * @brief Write a value in PWR register |
||
| 166 | * @param __REG__ Register to be written |
||
| 167 | * @param __VALUE__ Value to be written in the register |
||
| 168 | * @retval None |
||
| 169 | */ |
||
| 170 | #define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) |
||
| 171 | |||
| 172 | /** |
||
| 173 | * @brief Read a value in PWR register |
||
| 174 | * @param __REG__ Register to be read |
||
| 175 | * @retval Register value |
||
| 176 | */ |
||
| 177 | #define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) |
||
| 178 | /** |
||
| 179 | * @} |
||
| 180 | */ |
||
| 181 | |||
| 182 | /** |
||
| 183 | * @} |
||
| 184 | */ |
||
| 185 | |||
| 186 | /* Exported functions --------------------------------------------------------*/ |
||
| 187 | /** @defgroup PWR_LL_Exported_Functions PWR Exported Functions |
||
| 188 | * @{ |
||
| 189 | */ |
||
| 190 | |||
| 191 | /** @defgroup PWR_LL_EF_Configuration Configuration |
||
| 192 | * @{ |
||
| 193 | */ |
||
| 194 | /** |
||
| 195 | * @brief Switch the Regulator from main mode to low-power mode |
||
| 196 | * @rmtoll CR LPRUN LL_PWR_EnableLowPowerRunMode |
||
| 197 | * @note Remind to set the Regulator to low power before enabling |
||
| 198 | * LowPower run mode (bit @ref LL_PWR_REGU_LPMODES_LOW_POWER). |
||
| 199 | * @retval None |
||
| 200 | */ |
||
| 201 | __STATIC_INLINE void LL_PWR_EnableLowPowerRunMode(void) |
||
| 202 | { |
||
| 203 | SET_BIT(PWR->CR, PWR_CR_LPRUN); |
||
| 204 | } |
||
| 205 | |||
| 206 | /** |
||
| 207 | * @brief Switch the Regulator from low-power mode to main mode |
||
| 208 | * @rmtoll CR LPRUN LL_PWR_DisableLowPowerRunMode |
||
| 209 | * @retval None |
||
| 210 | */ |
||
| 211 | __STATIC_INLINE void LL_PWR_DisableLowPowerRunMode(void) |
||
| 212 | { |
||
| 213 | CLEAR_BIT(PWR->CR, PWR_CR_LPRUN); |
||
| 214 | } |
||
| 215 | |||
| 216 | /** |
||
| 217 | * @brief Check if the Regulator is in low-power mode |
||
| 218 | * @rmtoll CR LPRUN LL_PWR_IsEnabledLowPowerRunMode |
||
| 219 | * @retval State of bit (1 or 0). |
||
| 220 | */ |
||
| 221 | __STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void) |
||
| 222 | { |
||
| 223 | return ((READ_BIT(PWR->CR, PWR_CR_LPRUN) == PWR_CR_LPRUN) ? 1UL : 0UL); |
||
| 224 | } |
||
| 225 | |||
| 226 | /** |
||
| 227 | * @brief Set voltage Regulator to low-power and switch from |
||
| 228 | * run main mode to run low-power mode. |
||
| 229 | * @rmtoll CR LPSDSR LL_PWR_EnterLowPowerRunMode\n |
||
| 230 | * CR LPRUN LL_PWR_EnterLowPowerRunMode |
||
| 231 | * @note This "high level" function is introduced to provide functional |
||
| 232 | * compatibility with other families. Notice that the two registers |
||
| 233 | * have to be written sequentially, so this function is not atomic. |
||
| 234 | * To assure atomicity you can call separately the following functions: |
||
| 235 | * - @ref LL_PWR_SetRegulModeLP(@ref LL_PWR_REGU_LPMODES_LOW_POWER); |
||
| 236 | * - @ref LL_PWR_EnableLowPowerRunMode(); |
||
| 237 | * @retval None |
||
| 238 | */ |
||
| 239 | __STATIC_INLINE void LL_PWR_EnterLowPowerRunMode(void) |
||
| 240 | { |
||
| 241 | SET_BIT(PWR->CR, PWR_CR_LPSDSR); /* => LL_PWR_SetRegulModeLP(LL_PWR_REGU_LPMODES_LOW_POWER) */ |
||
| 242 | SET_BIT(PWR->CR, PWR_CR_LPRUN); /* => LL_PWR_EnableLowPowerRunMode() */ |
||
| 243 | } |
||
| 244 | |||
| 245 | /** |
||
| 246 | * @brief Set voltage Regulator to main and switch from |
||
| 247 | * run main mode to low-power mode. |
||
| 248 | * @rmtoll CR LPSDSR LL_PWR_ExitLowPowerRunMode\n |
||
| 249 | * CR LPRUN LL_PWR_ExitLowPowerRunMode |
||
| 250 | * @note This "high level" function is introduced to provide functional |
||
| 251 | * compatibility with other families. Notice that the two registers |
||
| 252 | * have to be written sequentially, so this function is not atomic. |
||
| 253 | * To assure atomicity you can call separately the following functions: |
||
| 254 | * - @ref LL_PWR_DisableLowPowerRunMode(); |
||
| 255 | * - @ref LL_PWR_SetRegulModeLP(@ref LL_PWR_REGU_LPMODES_MAIN); |
||
| 256 | * @retval None |
||
| 257 | */ |
||
| 258 | __STATIC_INLINE void LL_PWR_ExitLowPowerRunMode(void) |
||
| 259 | { |
||
| 260 | CLEAR_BIT(PWR->CR, PWR_CR_LPRUN); /* => LL_PWR_DisableLowPowerRunMode() */ |
||
| 261 | CLEAR_BIT(PWR->CR, PWR_CR_LPSDSR); /* => LL_PWR_SetRegulModeLP(LL_PWR_REGU_LPMODES_MAIN) */ |
||
| 262 | } |
||
| 263 | /** |
||
| 264 | * @brief Set the main internal Regulator output voltage |
||
| 265 | * @rmtoll CR VOS LL_PWR_SetRegulVoltageScaling |
||
| 266 | * @param VoltageScaling This parameter can be one of the following values: |
||
| 267 | * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 |
||
| 268 | * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 |
||
| 269 | * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 |
||
| 270 | * @retval None |
||
| 271 | */ |
||
| 272 | __STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) |
||
| 273 | { |
||
| 274 | MODIFY_REG(PWR->CR, PWR_CR_VOS, VoltageScaling); |
||
| 275 | } |
||
| 276 | |||
| 277 | /** |
||
| 278 | * @brief Get the main internal Regulator output voltage |
||
| 279 | * @rmtoll CR VOS LL_PWR_GetRegulVoltageScaling |
||
| 280 | * @retval Returned value can be one of the following values: |
||
| 281 | * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 |
||
| 282 | * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 |
||
| 283 | * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 |
||
| 284 | */ |
||
| 285 | __STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) |
||
| 286 | { |
||
| 287 | return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_VOS)); |
||
| 288 | } |
||
| 289 | |||
| 290 | /** |
||
| 291 | * @brief Enable access to the backup domain |
||
| 292 | * @rmtoll CR DBP LL_PWR_EnableBkUpAccess |
||
| 293 | * @retval None |
||
| 294 | */ |
||
| 295 | __STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) |
||
| 296 | { |
||
| 297 | SET_BIT(PWR->CR, PWR_CR_DBP); |
||
| 298 | } |
||
| 299 | |||
| 300 | /** |
||
| 301 | * @brief Disable access to the backup domain |
||
| 302 | * @rmtoll CR DBP LL_PWR_DisableBkUpAccess |
||
| 303 | * @retval None |
||
| 304 | */ |
||
| 305 | __STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) |
||
| 306 | { |
||
| 307 | CLEAR_BIT(PWR->CR, PWR_CR_DBP); |
||
| 308 | } |
||
| 309 | |||
| 310 | /** |
||
| 311 | * @brief Check if the backup domain is enabled |
||
| 312 | * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess |
||
| 313 | * @retval State of bit (1 or 0). |
||
| 314 | */ |
||
| 315 | __STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) |
||
| 316 | { |
||
| 317 | return ((READ_BIT(PWR->CR, PWR_CR_DBP) == PWR_CR_DBP) ? 1UL : 0UL); |
||
| 318 | } |
||
| 319 | |||
| 320 | /** |
||
| 321 | * @brief Set voltage Regulator mode during low power modes |
||
| 322 | * @rmtoll CR LPSDSR LL_PWR_SetRegulModeLP |
||
| 323 | * @param RegulMode This parameter can be one of the following values: |
||
| 324 | * @arg @ref LL_PWR_REGU_LPMODES_MAIN |
||
| 325 | * @arg @ref LL_PWR_REGU_LPMODES_LOW_POWER |
||
| 326 | * @retval None |
||
| 327 | */ |
||
| 328 | __STATIC_INLINE void LL_PWR_SetRegulModeLP(uint32_t RegulMode) |
||
| 329 | { |
||
| 330 | MODIFY_REG(PWR->CR, PWR_CR_LPSDSR, RegulMode); |
||
| 331 | } |
||
| 332 | |||
| 333 | /** |
||
| 334 | * @brief Get voltage Regulator mode during low power modes |
||
| 335 | * @rmtoll CR LPSDSR LL_PWR_GetRegulModeLP |
||
| 336 | * @retval Returned value can be one of the following values: |
||
| 337 | * @arg @ref LL_PWR_REGU_LPMODES_MAIN |
||
| 338 | * @arg @ref LL_PWR_REGU_LPMODES_LOW_POWER |
||
| 339 | */ |
||
| 340 | __STATIC_INLINE uint32_t LL_PWR_GetRegulModeLP(void) |
||
| 341 | { |
||
| 342 | return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPSDSR)); |
||
| 343 | } |
||
| 344 | |||
| 345 | #if defined(PWR_CR_LPDS) |
||
| 346 | /** |
||
| 347 | * @brief Set voltage Regulator mode during deep sleep mode |
||
| 348 | * @rmtoll CR LPDS LL_PWR_SetRegulModeDS |
||
| 349 | * @param RegulMode This parameter can be one of the following values: |
||
| 350 | * @arg @ref LL_PWR_REGU_DSMODE_MAIN |
||
| 351 | * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER |
||
| 352 | * @retval None |
||
| 353 | */ |
||
| 354 | __STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) |
||
| 355 | { |
||
| 356 | MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode); |
||
| 357 | } |
||
| 358 | |||
| 359 | /** |
||
| 360 | * @brief Get voltage Regulator mode during deep sleep mode |
||
| 361 | * @rmtoll CR LPDS LL_PWR_GetRegulModeDS |
||
| 362 | * @retval Returned value can be one of the following values: |
||
| 363 | * @arg @ref LL_PWR_REGU_DSMODE_MAIN |
||
| 364 | * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER |
||
| 365 | */ |
||
| 366 | __STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) |
||
| 367 | { |
||
| 368 | return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS)); |
||
| 369 | } |
||
| 370 | #endif /* PWR_CR_LPDS */ |
||
| 371 | |||
| 372 | /** |
||
| 373 | * @brief Set Power Down mode when CPU enters deepsleep |
||
| 374 | * @rmtoll CR PDDS LL_PWR_SetPowerMode |
||
| 375 | * @param PDMode This parameter can be one of the following values: |
||
| 376 | * @arg @ref LL_PWR_MODE_STOP |
||
| 377 | * @arg @ref LL_PWR_MODE_STANDBY |
||
| 378 | * @note Set the Regulator to low power (bit @ref LL_PWR_REGU_LPMODES_LOW_POWER) |
||
| 379 | * before setting MODE_STOP. If the Regulator remains in "main mode", |
||
| 380 | * it consumes more power without providing any additional feature. |
||
| 381 | * In MODE_STANDBY the Regulator is automatically off. |
||
| 382 | * @retval None |
||
| 383 | */ |
||
| 384 | __STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode) |
||
| 385 | { |
||
| 386 | MODIFY_REG(PWR->CR, PWR_CR_PDDS, PDMode); |
||
| 387 | } |
||
| 388 | |||
| 389 | /** |
||
| 390 | * @brief Get Power Down mode when CPU enters deepsleep |
||
| 391 | * @rmtoll CR PDDS LL_PWR_GetPowerMode |
||
| 392 | * @retval Returned value can be one of the following values: |
||
| 393 | * @arg @ref LL_PWR_MODE_STOP |
||
| 394 | * @arg @ref LL_PWR_MODE_STANDBY |
||
| 395 | */ |
||
| 396 | __STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) |
||
| 397 | { |
||
| 398 | return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PDDS)); |
||
| 399 | } |
||
| 400 | |||
| 401 | #if defined(PWR_PVD_SUPPORT) |
||
| 402 | /** |
||
| 403 | * @brief Configure the voltage threshold detected by the Power Voltage Detector |
||
| 404 | * @rmtoll CR PLS LL_PWR_SetPVDLevel |
||
| 405 | * @param PVDLevel This parameter can be one of the following values: |
||
| 406 | * @arg @ref LL_PWR_PVDLEVEL_0 |
||
| 407 | * @arg @ref LL_PWR_PVDLEVEL_1 |
||
| 408 | * @arg @ref LL_PWR_PVDLEVEL_2 |
||
| 409 | * @arg @ref LL_PWR_PVDLEVEL_3 |
||
| 410 | * @arg @ref LL_PWR_PVDLEVEL_4 |
||
| 411 | * @arg @ref LL_PWR_PVDLEVEL_5 |
||
| 412 | * @arg @ref LL_PWR_PVDLEVEL_6 |
||
| 413 | * @arg @ref LL_PWR_PVDLEVEL_7 |
||
| 414 | * @retval None |
||
| 415 | */ |
||
| 416 | __STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) |
||
| 417 | { |
||
| 418 | MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel); |
||
| 419 | } |
||
| 420 | |||
| 421 | /** |
||
| 422 | * @brief Get the voltage threshold detection |
||
| 423 | * @rmtoll CR PLS LL_PWR_GetPVDLevel |
||
| 424 | * @retval Returned value can be one of the following values: |
||
| 425 | * @arg @ref LL_PWR_PVDLEVEL_0 |
||
| 426 | * @arg @ref LL_PWR_PVDLEVEL_1 |
||
| 427 | * @arg @ref LL_PWR_PVDLEVEL_2 |
||
| 428 | * @arg @ref LL_PWR_PVDLEVEL_3 |
||
| 429 | * @arg @ref LL_PWR_PVDLEVEL_4 |
||
| 430 | * @arg @ref LL_PWR_PVDLEVEL_5 |
||
| 431 | * @arg @ref LL_PWR_PVDLEVEL_6 |
||
| 432 | * @arg @ref LL_PWR_PVDLEVEL_7 |
||
| 433 | */ |
||
| 434 | __STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) |
||
| 435 | { |
||
| 436 | return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS)); |
||
| 437 | } |
||
| 438 | |||
| 439 | /** |
||
| 440 | * @brief Enable Power Voltage Detector |
||
| 441 | * @rmtoll CR PVDE LL_PWR_EnablePVD |
||
| 442 | * @retval None |
||
| 443 | */ |
||
| 444 | __STATIC_INLINE void LL_PWR_EnablePVD(void) |
||
| 445 | { |
||
| 446 | SET_BIT(PWR->CR, PWR_CR_PVDE); |
||
| 447 | } |
||
| 448 | |||
| 449 | /** |
||
| 450 | * @brief Disable Power Voltage Detector |
||
| 451 | * @rmtoll CR PVDE LL_PWR_DisablePVD |
||
| 452 | * @retval None |
||
| 453 | */ |
||
| 454 | __STATIC_INLINE void LL_PWR_DisablePVD(void) |
||
| 455 | { |
||
| 456 | CLEAR_BIT(PWR->CR, PWR_CR_PVDE); |
||
| 457 | } |
||
| 458 | |||
| 459 | /** |
||
| 460 | * @brief Check if Power Voltage Detector is enabled |
||
| 461 | * @rmtoll CR PVDE LL_PWR_IsEnabledPVD |
||
| 462 | * @retval State of bit (1 or 0). |
||
| 463 | */ |
||
| 464 | __STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) |
||
| 465 | { |
||
| 466 | return ((READ_BIT(PWR->CR, PWR_CR_PVDE) == PWR_CR_PVDE) ? 1UL : 0UL); |
||
| 467 | } |
||
| 468 | #endif /* PWR_PVD_SUPPORT */ |
||
| 469 | |||
| 470 | /** |
||
| 471 | * @brief Enable the WakeUp PINx functionality |
||
| 472 | * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n |
||
| 473 | * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n |
||
| 474 | * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin |
||
| 475 | * @param WakeUpPin This parameter can be one of the following values: |
||
| 476 | * @arg @ref LL_PWR_WAKEUP_PIN1 |
||
| 477 | * @arg @ref LL_PWR_WAKEUP_PIN2 |
||
| 478 | * @arg @ref LL_PWR_WAKEUP_PIN3 (*) |
||
| 479 | * |
||
| 480 | * (*) not available on all devices |
||
| 481 | * @retval None |
||
| 482 | */ |
||
| 483 | __STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) |
||
| 484 | { |
||
| 485 | SET_BIT(PWR->CSR, WakeUpPin); |
||
| 486 | } |
||
| 487 | |||
| 488 | /** |
||
| 489 | * @brief Disable the WakeUp PINx functionality |
||
| 490 | * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n |
||
| 491 | * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n |
||
| 492 | * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin |
||
| 493 | * @param WakeUpPin This parameter can be one of the following values: |
||
| 494 | * @arg @ref LL_PWR_WAKEUP_PIN1 |
||
| 495 | * @arg @ref LL_PWR_WAKEUP_PIN2 |
||
| 496 | * @arg @ref LL_PWR_WAKEUP_PIN3 (*) |
||
| 497 | * |
||
| 498 | * (*) not available on all devices |
||
| 499 | * @retval None |
||
| 500 | */ |
||
| 501 | __STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) |
||
| 502 | { |
||
| 503 | CLEAR_BIT(PWR->CSR, WakeUpPin); |
||
| 504 | } |
||
| 505 | |||
| 506 | /** |
||
| 507 | * @brief Check if the WakeUp PINx functionality is enabled |
||
| 508 | * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n |
||
| 509 | * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n |
||
| 510 | * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin |
||
| 511 | * @param WakeUpPin This parameter can be one of the following values: |
||
| 512 | * @arg @ref LL_PWR_WAKEUP_PIN1 |
||
| 513 | * @arg @ref LL_PWR_WAKEUP_PIN2 |
||
| 514 | * @arg @ref LL_PWR_WAKEUP_PIN3 (*) |
||
| 515 | * |
||
| 516 | * (*) not available on all devices |
||
| 517 | * @retval State of bit (1 or 0). |
||
| 518 | */ |
||
| 519 | __STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) |
||
| 520 | { |
||
| 521 | return ((READ_BIT(PWR->CSR, WakeUpPin) == WakeUpPin) ? 1UL : 0UL); |
||
| 522 | } |
||
| 523 | |||
| 524 | /** |
||
| 525 | * @brief Enable ultra low-power mode by enabling VREFINT switch off in low-power modes |
||
| 526 | * @rmtoll CR ULP LL_PWR_EnableUltraLowPower |
||
| 527 | * @retval None |
||
| 528 | */ |
||
| 529 | __STATIC_INLINE void LL_PWR_EnableUltraLowPower(void) |
||
| 530 | { |
||
| 531 | SET_BIT(PWR->CR, PWR_CR_ULP); |
||
| 532 | } |
||
| 533 | |||
| 534 | /** |
||
| 535 | * @brief Disable ultra low-power mode by disabling VREFINT switch off in low-power modes |
||
| 536 | * @rmtoll CR ULP LL_PWR_DisableUltraLowPower |
||
| 537 | * @retval None |
||
| 538 | */ |
||
| 539 | __STATIC_INLINE void LL_PWR_DisableUltraLowPower(void) |
||
| 540 | { |
||
| 541 | CLEAR_BIT(PWR->CR, PWR_CR_ULP); |
||
| 542 | } |
||
| 543 | |||
| 544 | /** |
||
| 545 | * @brief Check if ultra low-power mode is enabled by checking if VREFINT switch off in low-power modes is enabled |
||
| 546 | * @rmtoll CR ULP LL_PWR_IsEnabledUltraLowPower |
||
| 547 | * @retval State of bit (1 or 0). |
||
| 548 | */ |
||
| 549 | __STATIC_INLINE uint32_t LL_PWR_IsEnabledUltraLowPower(void) |
||
| 550 | { |
||
| 551 | return ((READ_BIT(PWR->CR, PWR_CR_ULP) == PWR_CR_ULP) ? 1UL : 0UL); |
||
| 552 | } |
||
| 553 | |||
| 554 | /** |
||
| 555 | * @brief Enable fast wakeup by ignoring VREFINT startup time when exiting from low-power mode |
||
| 556 | * @rmtoll CR FWU LL_PWR_EnableFastWakeUp |
||
| 557 | * @note Works in conjunction with ultra low power mode. |
||
| 558 | * @retval None |
||
| 559 | */ |
||
| 560 | __STATIC_INLINE void LL_PWR_EnableFastWakeUp(void) |
||
| 561 | { |
||
| 562 | SET_BIT(PWR->CR, PWR_CR_FWU); |
||
| 563 | } |
||
| 564 | |||
| 565 | /** |
||
| 566 | * @brief Disable fast wakeup by waiting VREFINT startup time when exiting from low-power mode |
||
| 567 | * @rmtoll CR FWU LL_PWR_DisableFastWakeUp |
||
| 568 | * @note Works in conjunction with ultra low power mode. |
||
| 569 | * @retval None |
||
| 570 | */ |
||
| 571 | __STATIC_INLINE void LL_PWR_DisableFastWakeUp(void) |
||
| 572 | { |
||
| 573 | CLEAR_BIT(PWR->CR, PWR_CR_FWU); |
||
| 574 | } |
||
| 575 | |||
| 576 | /** |
||
| 577 | * @brief Check if fast wakeup is enabled by checking if VREFINT startup time when exiting from low-power mode is ignored |
||
| 578 | * @rmtoll CR FWU LL_PWR_IsEnabledFastWakeUp |
||
| 579 | * @retval State of bit (1 or 0). |
||
| 580 | */ |
||
| 581 | __STATIC_INLINE uint32_t LL_PWR_IsEnabledFastWakeUp(void) |
||
| 582 | { |
||
| 583 | return ((READ_BIT(PWR->CR, PWR_CR_FWU) == PWR_CR_FWU) ? 1UL : 0UL); |
||
| 584 | } |
||
| 585 | |||
| 586 | |||
| 587 | /** |
||
| 588 | * @} |
||
| 589 | */ |
||
| 590 | |||
| 591 | /** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management |
||
| 592 | * @{ |
||
| 593 | */ |
||
| 594 | |||
| 595 | /** |
||
| 596 | * @brief Get Wake-up Flag |
||
| 597 | * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU |
||
| 598 | * @retval State of bit (1 or 0). |
||
| 599 | */ |
||
| 600 | __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void) |
||
| 601 | { |
||
| 602 | return ((READ_BIT(PWR->CSR, PWR_CSR_WUF) == PWR_CSR_WUF) ? 1UL : 0UL); |
||
| 603 | } |
||
| 604 | |||
| 605 | /** |
||
| 606 | * @brief Get Standby Flag |
||
| 607 | * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB |
||
| 608 | * @retval State of bit (1 or 0). |
||
| 609 | */ |
||
| 610 | __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) |
||
| 611 | { |
||
| 612 | return ((READ_BIT(PWR->CSR, PWR_CSR_SBF) == PWR_CSR_SBF) ? 1UL : 0UL); |
||
| 613 | } |
||
| 614 | |||
| 615 | #if defined(PWR_PVD_SUPPORT) |
||
| 616 | /** |
||
| 617 | * @brief Indicate whether VDD voltage is below the selected PVD threshold |
||
| 618 | * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO |
||
| 619 | * @retval State of bit (1 or 0). |
||
| 620 | */ |
||
| 621 | __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) |
||
| 622 | { |
||
| 623 | return ((READ_BIT(PWR->CSR, PWR_CSR_PVDO) == PWR_CSR_PVDO) ? 1UL : 0UL); |
||
| 624 | } |
||
| 625 | #endif /* PWR_PVD_SUPPORT */ |
||
| 626 | |||
| 627 | #if defined(PWR_CSR_VREFINTRDYF) |
||
| 628 | /** |
||
| 629 | * @brief Get Internal Reference VrefInt Flag |
||
| 630 | * @rmtoll CSR VREFINTRDYF LL_PWR_IsActiveFlag_VREFINTRDY |
||
| 631 | * @retval State of bit (1 or 0). |
||
| 632 | */ |
||
| 633 | __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VREFINTRDY(void) |
||
| 634 | { |
||
| 635 | return ((READ_BIT(PWR->CSR, PWR_CSR_VREFINTRDYF) == PWR_CSR_VREFINTRDYF) ? 1UL : 0UL); |
||
| 636 | } |
||
| 637 | #endif /* PWR_CSR_VREFINTRDYF */ |
||
| 638 | /** |
||
| 639 | * @brief Indicate whether the Regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level |
||
| 640 | * @rmtoll CSR VOSF LL_PWR_IsActiveFlag_VOS |
||
| 641 | * @retval State of bit (1 or 0). |
||
| 642 | */ |
||
| 643 | __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) |
||
| 644 | { |
||
| 645 | return ((READ_BIT(PWR->CSR, PWR_CSR_VOSF) == PWR_CSR_VOSF) ? 1UL : 0UL); |
||
| 646 | } |
||
| 647 | /** |
||
| 648 | * @brief Indicate whether the Regulator is ready in main mode or is in low-power mode |
||
| 649 | * @rmtoll CSR REGLPF LL_PWR_IsActiveFlag_REGLPF |
||
| 650 | * @note Take care, return value "0" means the Regulator is ready. Return value "1" means the output voltage range is still changing. |
||
| 651 | * @retval State of bit (1 or 0). |
||
| 652 | */ |
||
| 653 | __STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPF(void) |
||
| 654 | { |
||
| 655 | return ((READ_BIT(PWR->CSR, PWR_CSR_REGLPF) == PWR_CSR_REGLPF) ? 1UL : 0UL); |
||
| 656 | } |
||
| 657 | /** |
||
| 658 | * @brief Clear Standby Flag |
||
| 659 | * @rmtoll CR CSBF LL_PWR_ClearFlag_SB |
||
| 660 | * @retval None |
||
| 661 | */ |
||
| 662 | __STATIC_INLINE void LL_PWR_ClearFlag_SB(void) |
||
| 663 | { |
||
| 664 | SET_BIT(PWR->CR, PWR_CR_CSBF); |
||
| 665 | } |
||
| 666 | |||
| 667 | /** |
||
| 668 | * @brief Clear Wake-up Flags |
||
| 669 | * @rmtoll CR CWUF LL_PWR_ClearFlag_WU |
||
| 670 | * @retval None |
||
| 671 | */ |
||
| 672 | __STATIC_INLINE void LL_PWR_ClearFlag_WU(void) |
||
| 673 | { |
||
| 674 | SET_BIT(PWR->CR, PWR_CR_CWUF); |
||
| 675 | } |
||
| 676 | |||
| 677 | /** |
||
| 678 | * @} |
||
| 679 | */ |
||
| 680 | |||
| 681 | #if defined(USE_FULL_LL_DRIVER) |
||
| 682 | /** @defgroup PWR_LL_EF_Init De-initialization function |
||
| 683 | * @{ |
||
| 684 | */ |
||
| 685 | ErrorStatus LL_PWR_DeInit(void); |
||
| 686 | /** |
||
| 687 | * @} |
||
| 688 | */ |
||
| 689 | #endif /* USE_FULL_LL_DRIVER */ |
||
| 690 | |||
| 691 | /** @defgroup PWR_LL_EF_Legacy_Functions PWR legacy functions name |
||
| 692 | * @{ |
||
| 693 | */ |
||
| 694 | /* Old functions name kept for legacy purpose, to be replaced by the */ |
||
| 695 | /* current functions name. */ |
||
| 696 | #define LL_PWR_IsActiveFlag_VOSF LL_PWR_IsActiveFlag_VOS |
||
| 697 | /** |
||
| 698 | * @} |
||
| 699 | */ |
||
| 700 | |||
| 701 | /** |
||
| 702 | * @} |
||
| 703 | */ |
||
| 704 | |||
| 705 | /** |
||
| 706 | * @} |
||
| 707 | */ |
||
| 708 | |||
| 709 | #endif /* defined(PWR) */ |
||
| 710 | |||
| 711 | /** |
||
| 712 | * @} |
||
| 713 | */ |
||
| 714 | |||
| 715 | #ifdef __cplusplus |
||
| 716 | } |
||
| 717 | #endif |
||
| 718 | |||
| 719 | #endif /* __STM32L1xx_LL_PWR_H */ |
||
| 720 | |||
| 721 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |