Rev 61 | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 77 | mjames | 1 | /** |
| 2 | ****************************************************************************** |
||
| 3 | * @file stm32l1xx_ll_dac.h |
||
| 4 | * @author MCD Application Team |
||
| 5 | * @brief Header file of DAC LL module. |
||
| 6 | ****************************************************************************** |
||
| 7 | * @attention |
||
| 8 | * |
||
| 9 | * Copyright (c) 2016 STMicroelectronics. |
||
| 10 | * All rights reserved. |
||
| 11 | * |
||
| 12 | * This software is licensed under terms that can be found in the LICENSE file |
||
| 13 | * in the root directory of this software component. |
||
| 14 | * If no LICENSE file comes with this software, it is provided AS-IS. |
||
| 15 | * |
||
| 16 | ****************************************************************************** |
||
| 17 | */ |
||
| 18 | |||
| 19 | /* Define to prevent recursive inclusion -------------------------------------*/ |
||
| 20 | #ifndef STM32L1xx_LL_DAC_H |
||
| 21 | #define STM32L1xx_LL_DAC_H |
||
| 22 | |||
| 23 | #ifdef __cplusplus |
||
| 24 | extern "C" { |
||
| 25 | #endif |
||
| 26 | |||
| 27 | /* Includes ------------------------------------------------------------------*/ |
||
| 28 | #include "stm32l1xx.h" |
||
| 29 | |||
| 30 | /** @addtogroup STM32L1xx_LL_Driver |
||
| 31 | * @{ |
||
| 32 | */ |
||
| 33 | |||
| 34 | #if defined(DAC1) |
||
| 35 | |||
| 36 | /** @defgroup DAC_LL DAC |
||
| 37 | * @{ |
||
| 38 | */ |
||
| 39 | |||
| 40 | /* Private types -------------------------------------------------------------*/ |
||
| 41 | /* Private variables ---------------------------------------------------------*/ |
||
| 42 | |||
| 43 | /* Private constants ---------------------------------------------------------*/ |
||
| 44 | /** @defgroup DAC_LL_Private_Constants DAC Private Constants |
||
| 45 | * @{ |
||
| 46 | */ |
||
| 47 | |||
| 48 | /* Internal masks for DAC channels definition */ |
||
| 49 | /* To select into literal LL_DAC_CHANNEL_x the relevant bits for: */ |
||
| 50 | /* - channel bits position into registers CR, MCR, CCR, SHHR, SHRR */ |
||
| 51 | /* - channel bits position into register SWTRIG */ |
||
| 52 | /* - channel register offset of data holding register DHRx */ |
||
| 53 | /* - channel register offset of data output register DORx */ |
||
| 54 | #define DAC_CR_CH1_BITOFFSET 0UL /* Position of channel bits into registers |
||
| 55 | CR, MCR, CCR, SHHR, SHRR of channel 1 */ |
||
| 56 | #define DAC_CR_CH2_BITOFFSET 16UL /* Position of channel bits into registers |
||
| 57 | CR, MCR, CCR, SHHR, SHRR of channel 2 */ |
||
| 58 | #define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET) |
||
| 59 | |||
| 60 | #define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. */ |
||
| 61 | #define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. */ |
||
| 62 | #define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2) |
||
| 63 | |||
| 64 | #define DAC_REG_DHR12R1_REGOFFSET 0x00000000UL /* Register DHR12Rx channel 1 taken as reference */ |
||
| 65 | #define DAC_REG_DHR12L1_REGOFFSET 0x00100000UL /* Register offset of DHR12Lx channel 1 versus |
||
| 66 | DHR12Rx channel 1 (shifted left of 20 bits) */ |
||
| 67 | #define DAC_REG_DHR8R1_REGOFFSET 0x02000000UL /* Register offset of DHR8Rx channel 1 versus |
||
| 68 | DHR12Rx channel 1 (shifted left of 24 bits) */ |
||
| 69 | |||
| 70 | #define DAC_REG_DHR12R2_REGOFFSET 0x00030000UL /* Register offset of DHR12Rx channel 2 versus |
||
| 71 | DHR12Rx channel 1 (shifted left of 16 bits) */ |
||
| 72 | #define DAC_REG_DHR12L2_REGOFFSET 0x00400000UL /* Register offset of DHR12Lx channel 2 versus |
||
| 73 | DHR12Rx channel 1 (shifted left of 20 bits) */ |
||
| 74 | #define DAC_REG_DHR8R2_REGOFFSET 0x05000000UL /* Register offset of DHR8Rx channel 2 versus |
||
| 75 | DHR12Rx channel 1 (shifted left of 24 bits) */ |
||
| 76 | |||
| 77 | #define DAC_REG_DHR12RX_REGOFFSET_MASK 0x000F0000UL |
||
| 78 | #define DAC_REG_DHR12LX_REGOFFSET_MASK 0x00F00000UL |
||
| 79 | #define DAC_REG_DHR8RX_REGOFFSET_MASK 0x0F000000UL |
||
| 80 | #define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK\ |
||
| 81 | | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK) |
||
| 82 | |||
| 83 | #define DAC_REG_DOR1_REGOFFSET 0x00000000UL /* Register DORx channel 1 taken as reference */ |
||
| 84 | |||
| 85 | #define DAC_REG_DOR2_REGOFFSET 0x10000000UL /* Register offset of DORx channel 1 versus |
||
| 86 | DORx channel 2 (shifted left of 28 bits) */ |
||
| 87 | #define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET) |
||
| 88 | |||
| 89 | |||
| 90 | |||
| 91 | #define DAC_REG_DHR_REGOFFSET_MASK_POSBIT0 0x0000000FUL /* Mask of data hold registers offset (DHR12Rx, |
||
| 92 | DHR12Lx, DHR8Rx, ...) when shifted to position 0 */ |
||
| 93 | #define DAC_REG_DORX_REGOFFSET_MASK_POSBIT0 0x00000001UL /* Mask of DORx registers offset when shifted |
||
| 94 | to position 0 */ |
||
| 95 | #define DAC_REG_SHSRX_REGOFFSET_MASK_POSBIT0 0x00000001UL /* Mask of SHSRx registers offset when shifted |
||
| 96 | to position 0 */ |
||
| 97 | |||
| 98 | #define DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS 16UL /* Position of bits register offset of DHR12Rx |
||
| 99 | channel 1 or 2 versus DHR12Rx channel 1 |
||
| 100 | (shifted left of 16 bits) */ |
||
| 101 | #define DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS 20UL /* Position of bits register offset of DHR12Lx |
||
| 102 | channel 1 or 2 versus DHR12Rx channel 1 |
||
| 103 | (shifted left of 20 bits) */ |
||
| 104 | #define DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS 24UL /* Position of bits register offset of DHR8Rx |
||
| 105 | channel 1 or 2 versus DHR12Rx channel 1 |
||
| 106 | (shifted left of 24 bits) */ |
||
| 107 | #define DAC_REG_DORX_REGOFFSET_BITOFFSET_POS 28UL /* Position of bits register offset of DORx |
||
| 108 | channel 1 or 2 versus DORx channel 1 |
||
| 109 | (shifted left of 28 bits) */ |
||
| 110 | |||
| 111 | /* DAC registers bits positions */ |
||
| 112 | #define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS DAC_DHR12RD_DACC2DHR_Pos |
||
| 113 | #define DAC_DHR12LD_DACC2DHR_BITOFFSET_POS DAC_DHR12LD_DACC2DHR_Pos |
||
| 114 | #define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS DAC_DHR8RD_DACC2DHR_Pos |
||
| 115 | |||
| 116 | /* Miscellaneous data */ |
||
| 117 | #define DAC_DIGITAL_SCALE_12BITS 4095UL /* Full-scale digital value with a resolution of 12 |
||
| 118 | bits (voltage range determined by analog voltage |
||
| 119 | references Vref+ and Vref-, refer to reference manual) */ |
||
| 120 | |||
| 121 | /** |
||
| 122 | * @} |
||
| 123 | */ |
||
| 124 | |||
| 125 | |||
| 126 | /* Private macros ------------------------------------------------------------*/ |
||
| 127 | /** @defgroup DAC_LL_Private_Macros DAC Private Macros |
||
| 128 | * @{ |
||
| 129 | */ |
||
| 130 | |||
| 131 | /** |
||
| 132 | * @brief Driver macro reserved for internal use: set a pointer to |
||
| 133 | * a register from a register basis from which an offset |
||
| 134 | * is applied. |
||
| 135 | * @param __REG__ Register basis from which the offset is applied. |
||
| 136 | * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). |
||
| 137 | * @retval Pointer to register address |
||
| 138 | */ |
||
| 139 | #define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ |
||
| 140 | ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) |
||
| 141 | |||
| 142 | /** |
||
| 143 | * @} |
||
| 144 | */ |
||
| 145 | |||
| 146 | |||
| 147 | /* Exported types ------------------------------------------------------------*/ |
||
| 148 | #if defined(USE_FULL_LL_DRIVER) |
||
| 149 | /** @defgroup DAC_LL_ES_INIT DAC Exported Init structure |
||
| 150 | * @{ |
||
| 151 | */ |
||
| 152 | |||
| 153 | /** |
||
| 154 | * @brief Structure definition of some features of DAC instance. |
||
| 155 | */ |
||
| 156 | typedef struct |
||
| 157 | { |
||
| 158 | uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: |
||
| 159 | internal (SW start) or from external peripheral |
||
| 160 | (timer event, external interrupt line). |
||
| 161 | This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE |
||
| 162 | |||
| 163 | This feature can be modified afterwards using unitary |
||
| 164 | function @ref LL_DAC_SetTriggerSource(). */ |
||
| 165 | |||
| 166 | uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel. |
||
| 167 | This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE |
||
| 168 | |||
| 169 | This feature can be modified afterwards using unitary |
||
| 170 | function @ref LL_DAC_SetWaveAutoGeneration(). */ |
||
| 171 | |||
| 172 | uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel. |
||
| 173 | If waveform automatic generation mode is set to noise, this parameter |
||
| 174 | can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS |
||
| 175 | If waveform automatic generation mode is set to triangle, |
||
| 176 | this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE |
||
| 177 | @note If waveform automatic generation mode is disabled, |
||
| 178 | this parameter is discarded. |
||
| 179 | |||
| 180 | This feature can be modified afterwards using unitary |
||
| 181 | function @ref LL_DAC_SetWaveNoiseLFSR(), |
||
| 182 | @ref LL_DAC_SetWaveTriangleAmplitude() |
||
| 183 | depending on the wave automatic generation selected. */ |
||
| 184 | |||
| 185 | uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel. |
||
| 186 | This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER |
||
| 187 | |||
| 188 | This feature can be modified afterwards using unitary |
||
| 189 | function @ref LL_DAC_SetOutputBuffer(). */ |
||
| 190 | } LL_DAC_InitTypeDef; |
||
| 191 | |||
| 192 | /** |
||
| 193 | * @} |
||
| 194 | */ |
||
| 195 | #endif /* USE_FULL_LL_DRIVER */ |
||
| 196 | |||
| 197 | /* Exported constants --------------------------------------------------------*/ |
||
| 198 | /** @defgroup DAC_LL_Exported_Constants DAC Exported Constants |
||
| 199 | * @{ |
||
| 200 | */ |
||
| 201 | |||
| 202 | /** @defgroup DAC_LL_EC_GET_FLAG DAC flags |
||
| 203 | * @brief Flags defines which can be used with LL_DAC_ReadReg function |
||
| 204 | * @{ |
||
| 205 | */ |
||
| 206 | /* DAC channel 1 flags */ |
||
| 207 | #define LL_DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) /*!< DAC channel 1 flag DMA underrun */ |
||
| 208 | |||
| 209 | /* DAC channel 2 flags */ |
||
| 210 | #define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */ |
||
| 211 | |||
| 212 | /** |
||
| 213 | * @} |
||
| 214 | */ |
||
| 215 | |||
| 216 | /** @defgroup DAC_LL_EC_IT DAC interruptions |
||
| 217 | * @brief IT defines which can be used with LL_DAC_ReadReg and LL_DAC_WriteReg functions |
||
| 218 | * @{ |
||
| 219 | */ |
||
| 220 | #define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */ |
||
| 221 | |||
| 222 | #define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */ |
||
| 223 | |||
| 224 | /** |
||
| 225 | * @} |
||
| 226 | */ |
||
| 227 | |||
| 228 | /** @defgroup DAC_LL_EC_CHANNEL DAC channels |
||
| 229 | * @{ |
||
| 230 | */ |
||
| 231 | #define LL_DAC_CHANNEL_1 (DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */ |
||
| 232 | |||
| 233 | #define LL_DAC_CHANNEL_2 (DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */ |
||
| 234 | |||
| 235 | /** |
||
| 236 | * @} |
||
| 237 | */ |
||
| 238 | |||
| 239 | /** @defgroup DAC_LL_EC_TRIGGER_SOURCE DAC trigger source |
||
| 240 | * @{ |
||
| 241 | */ |
||
| 242 | #define LL_DAC_TRIG_SOFTWARE (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger internal (SW start) */ |
||
| 243 | #define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external peripheral: TIM2 TRGO. */ |
||
| 244 | #define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM4 TRGO. */ |
||
| 245 | #define LL_DAC_TRIG_EXT_TIM6_TRGO 0x00000000UL /*!< DAC channel conversion trigger from external peripheral: TIM6 TRGO. */ |
||
| 246 | #define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: TIM7 TRGO. */ |
||
| 247 | #define LL_DAC_TRIG_EXT_TIM9_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM15 TRGO. */ |
||
| 248 | #define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: external interrupt line 9. */ |
||
| 249 | /** |
||
| 250 | * @} |
||
| 251 | */ |
||
| 252 | |||
| 253 | /** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode |
||
| 254 | * @{ |
||
| 255 | */ |
||
| 256 | #define LL_DAC_WAVE_AUTO_GENERATION_NONE 0x00000000UL /*!< DAC channel wave auto generation mode disabled. */ |
||
| 257 | #define LL_DAC_WAVE_AUTO_GENERATION_NOISE ( DAC_CR_WAVE1_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */ |
||
| 258 | #define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE1_1 ) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */ |
||
| 259 | /** |
||
| 260 | * @} |
||
| 261 | */ |
||
| 262 | |||
| 263 | /** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits |
||
| 264 | * @{ |
||
| 265 | */ |
||
| 266 | #define LL_DAC_NOISE_LFSR_UNMASK_BIT0 0x00000000UL /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */ |
||
| 267 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */ |
||
| 268 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */ |
||
| 269 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */ |
||
| 270 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Noise wave generation, unmask LFSR bits[4:0], for the selected DAC channel */ |
||
| 271 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[5:0], for the selected DAC channel */ |
||
| 272 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[6:0], for the selected DAC channel */ |
||
| 273 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[7:0], for the selected DAC channel */ |
||
| 274 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Noise wave generation, unmask LFSR bits[8:0], for the selected DAC channel */ |
||
| 275 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[9:0], for the selected DAC channel */ |
||
| 276 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[10:0], for the selected DAC channel */ |
||
| 277 | #define LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[11:0], for the selected DAC channel */ |
||
| 278 | /** |
||
| 279 | * @} |
||
| 280 | */ |
||
| 281 | |||
| 282 | /** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude |
||
| 283 | * @{ |
||
| 284 | */ |
||
| 285 | #define LL_DAC_TRIANGLE_AMPLITUDE_1 0x00000000UL /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */ |
||
| 286 | #define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */ |
||
| 287 | #define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */ |
||
| 288 | #define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */ |
||
| 289 | #define LL_DAC_TRIANGLE_AMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Triangle wave generation, amplitude of 31 LSB of DAC output range, for the selected DAC channel */ |
||
| 290 | #define LL_DAC_TRIANGLE_AMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 63 LSB of DAC output range, for the selected DAC channel */ |
||
| 291 | #define LL_DAC_TRIANGLE_AMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 127 LSB of DAC output range, for the selected DAC channel */ |
||
| 292 | #define LL_DAC_TRIANGLE_AMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 255 LSB of DAC output range, for the selected DAC channel */ |
||
| 293 | #define LL_DAC_TRIANGLE_AMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Triangle wave generation, amplitude of 512 LSB of DAC output range, for the selected DAC channel */ |
||
| 294 | #define LL_DAC_TRIANGLE_AMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 1023 LSB of DAC output range, for the selected DAC channel */ |
||
| 295 | #define LL_DAC_TRIANGLE_AMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 2047 LSB of DAC output range, for the selected DAC channel */ |
||
| 296 | #define LL_DAC_TRIANGLE_AMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 4095 LSB of DAC output range, for the selected DAC channel */ |
||
| 297 | /** |
||
| 298 | * @} |
||
| 299 | */ |
||
| 300 | |||
| 301 | /** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer |
||
| 302 | * @{ |
||
| 303 | */ |
||
| 304 | #define LL_DAC_OUTPUT_BUFFER_ENABLE 0x00000000UL /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */ |
||
| 305 | #define LL_DAC_OUTPUT_BUFFER_DISABLE (DAC_CR_BOFF1) /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */ |
||
| 306 | /** |
||
| 307 | * @} |
||
| 308 | */ |
||
| 309 | |||
| 310 | /** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution |
||
| 311 | * @{ |
||
| 312 | */ |
||
| 313 | #define LL_DAC_RESOLUTION_12B 0x00000000UL /*!< DAC channel resolution 12 bits */ |
||
| 314 | #define LL_DAC_RESOLUTION_8B 0x00000002UL /*!< DAC channel resolution 8 bits */ |
||
| 315 | /** |
||
| 316 | * @} |
||
| 317 | */ |
||
| 318 | |||
| 319 | /** @defgroup DAC_LL_EC_REGISTERS DAC registers compliant with specific purpose |
||
| 320 | * @{ |
||
| 321 | */ |
||
| 322 | /* List of DAC registers intended to be used (most commonly) with */ |
||
| 323 | /* DMA transfer. */ |
||
| 324 | /* Refer to function @ref LL_DAC_DMA_GetRegAddr(). */ |
||
| 325 | #define LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits right aligned */ |
||
| 326 | #define LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits left aligned */ |
||
| 327 | #define LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 8 bits right aligned */ |
||
| 328 | /** |
||
| 329 | * @} |
||
| 330 | */ |
||
| 331 | |||
| 332 | /** @defgroup DAC_LL_EC_HW_DELAYS Definitions of DAC hardware constraints delays |
||
| 333 | * @note Only DAC peripheral HW delays are defined in DAC LL driver driver, |
||
| 334 | * not timeout values. |
||
| 335 | * For details on delays values, refer to descriptions in source code |
||
| 336 | * above each literal definition. |
||
| 337 | * @{ |
||
| 338 | */ |
||
| 339 | |||
| 340 | /* Delay for DAC channel voltage settling time from DAC channel startup */ |
||
| 341 | /* (transition from disable to enable). */ |
||
| 342 | /* Note: DAC channel startup time depends on board application environment: */ |
||
| 343 | /* impedance connected to DAC channel output. */ |
||
| 344 | /* The delay below is specified under conditions: */ |
||
| 345 | /* - voltage maximum transition (lowest to highest value) */ |
||
| 346 | /* - until voltage reaches final value +-1LSB */ |
||
| 347 | /* - DAC channel output buffer enabled */ |
||
| 348 | /* - load impedance of 5kOhm (min), 50pF (max) */ |
||
| 349 | /* Literal set to maximum value (refer to device datasheet, */ |
||
| 350 | /* parameter "tWAKEUP"). */ |
||
| 351 | /* Unit: us */ |
||
| 352 | #define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US 15UL /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */ |
||
| 353 | |||
| 354 | /* Delay for DAC channel voltage settling time. */ |
||
| 355 | /* Note: DAC channel startup time depends on board application environment: */ |
||
| 356 | /* impedance connected to DAC channel output. */ |
||
| 357 | /* The delay below is specified under conditions: */ |
||
| 358 | /* - voltage maximum transition (lowest to highest value) */ |
||
| 359 | /* - until voltage reaches final value +-1LSB */ |
||
| 360 | /* - DAC channel output buffer enabled */ |
||
| 361 | /* - load impedance of 5kOhm min, 50pF max */ |
||
| 362 | /* Literal set to maximum value (refer to device datasheet, */ |
||
| 363 | /* parameter "tSETTLING"). */ |
||
| 364 | /* Unit: us */ |
||
| 365 | #define LL_DAC_DELAY_VOLTAGE_SETTLING_US 12UL /*!< Delay for DAC channel voltage settling time */ |
||
| 366 | |||
| 367 | /** |
||
| 368 | * @} |
||
| 369 | */ |
||
| 370 | |||
| 371 | /** |
||
| 372 | * @} |
||
| 373 | */ |
||
| 374 | |||
| 375 | /* Exported macro ------------------------------------------------------------*/ |
||
| 376 | /** @defgroup DAC_LL_Exported_Macros DAC Exported Macros |
||
| 377 | * @{ |
||
| 378 | */ |
||
| 379 | |||
| 380 | /** @defgroup DAC_LL_EM_WRITE_READ Common write and read registers macros |
||
| 381 | * @{ |
||
| 382 | */ |
||
| 383 | |||
| 384 | /** |
||
| 385 | * @brief Write a value in DAC register |
||
| 386 | * @param __INSTANCE__ DAC Instance |
||
| 387 | * @param __REG__ Register to be written |
||
| 388 | * @param __VALUE__ Value to be written in the register |
||
| 389 | * @retval None |
||
| 390 | */ |
||
| 391 | #define LL_DAC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) |
||
| 392 | |||
| 393 | /** |
||
| 394 | * @brief Read a value in DAC register |
||
| 395 | * @param __INSTANCE__ DAC Instance |
||
| 396 | * @param __REG__ Register to be read |
||
| 397 | * @retval Register value |
||
| 398 | */ |
||
| 399 | #define LL_DAC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) |
||
| 400 | |||
| 401 | /** |
||
| 402 | * @} |
||
| 403 | */ |
||
| 404 | |||
| 405 | /** @defgroup DAC_LL_EM_HELPER_MACRO DAC helper macro |
||
| 406 | * @{ |
||
| 407 | */ |
||
| 408 | |||
| 409 | /** |
||
| 410 | * @brief Helper macro to get DAC channel number in decimal format |
||
| 411 | * from literals LL_DAC_CHANNEL_x. |
||
| 412 | * Example: |
||
| 413 | * __LL_DAC_CHANNEL_TO_DECIMAL_NB(LL_DAC_CHANNEL_1) |
||
| 414 | * will return decimal number "1". |
||
| 415 | * @note The input can be a value from functions where a channel |
||
| 416 | * number is returned. |
||
| 417 | * @param __CHANNEL__ This parameter can be one of the following values: |
||
| 418 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 419 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 420 | * @retval 1...2 |
||
| 421 | */ |
||
| 422 | #define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ |
||
| 423 | ((__CHANNEL__) & DAC_SWTR_CHX_MASK) |
||
| 424 | |||
| 425 | /** |
||
| 426 | * @brief Helper macro to get DAC channel in literal format LL_DAC_CHANNEL_x |
||
| 427 | * from number in decimal format. |
||
| 428 | * Example: |
||
| 429 | * __LL_DAC_DECIMAL_NB_TO_CHANNEL(1) |
||
| 430 | * will return a data equivalent to "LL_DAC_CHANNEL_1". |
||
| 431 | * @note If the input parameter does not correspond to a DAC channel, |
||
| 432 | * this macro returns value '0'. |
||
| 433 | * @param __DECIMAL_NB__ 1...2 |
||
| 434 | * @retval Returned value can be one of the following values: |
||
| 435 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 436 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 437 | */ |
||
| 438 | #define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__)\ |
||
| 439 | (((__DECIMAL_NB__) == 1UL)? (LL_DAC_CHANNEL_1 ):(((__DECIMAL_NB__) == 2UL) ? ( LL_DAC_CHANNEL_2):(0UL))) |
||
| 440 | |||
| 441 | /** |
||
| 442 | * @brief Helper macro to define the DAC conversion data full-scale digital |
||
| 443 | * value corresponding to the selected DAC resolution. |
||
| 444 | * @note DAC conversion data full-scale corresponds to voltage range |
||
| 445 | * determined by analog voltage references Vref+ and Vref- |
||
| 446 | * (refer to reference manual). |
||
| 447 | * @param __DAC_RESOLUTION__ This parameter can be one of the following values: |
||
| 448 | * @arg @ref LL_DAC_RESOLUTION_12B |
||
| 449 | * @arg @ref LL_DAC_RESOLUTION_8B |
||
| 450 | * @retval ADC conversion data equivalent voltage value (unit: mVolt) |
||
| 451 | */ |
||
| 452 | #define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ |
||
| 453 | ((0x00000FFFUL) >> ((__DAC_RESOLUTION__) << 1UL)) |
||
| 454 | |||
| 455 | /** |
||
| 456 | * @brief Helper macro to calculate the DAC conversion data (unit: digital |
||
| 457 | * value) corresponding to a voltage (unit: mVolt). |
||
| 458 | * @note This helper macro is intended to provide input data in voltage |
||
| 459 | * rather than digital value, |
||
| 460 | * to be used with LL DAC functions such as |
||
| 461 | * @ref LL_DAC_ConvertData12RightAligned(). |
||
| 462 | * @note Analog reference voltage (Vref+) must be either known from |
||
| 463 | * user board environment or can be calculated using ADC measurement |
||
| 464 | * and ADC helper macro __LL_ADC_CALC_VREFANALOG_VOLTAGE(). |
||
| 465 | * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) |
||
| 466 | * @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel |
||
| 467 | * (unit: mVolt). |
||
| 468 | * @param __DAC_RESOLUTION__ This parameter can be one of the following values: |
||
| 469 | * @arg @ref LL_DAC_RESOLUTION_12B |
||
| 470 | * @arg @ref LL_DAC_RESOLUTION_8B |
||
| 471 | * @retval DAC conversion data (unit: digital value) |
||
| 472 | */ |
||
| 473 | #define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__, __DAC_VOLTAGE__, __DAC_RESOLUTION__) \ |
||
| 474 | ((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ |
||
| 475 | / (__VREFANALOG_VOLTAGE__) \ |
||
| 476 | ) |
||
| 477 | |||
| 478 | /** |
||
| 479 | * @} |
||
| 480 | */ |
||
| 481 | |||
| 482 | /** |
||
| 483 | * @} |
||
| 484 | */ |
||
| 485 | |||
| 486 | |||
| 487 | /* Exported functions --------------------------------------------------------*/ |
||
| 488 | /** @defgroup DAC_LL_Exported_Functions DAC Exported Functions |
||
| 489 | * @{ |
||
| 490 | */ |
||
| 491 | |||
| 492 | /** |
||
| 493 | * @brief Set the conversion trigger source for the selected DAC channel. |
||
| 494 | * @note For conversion trigger source to be effective, DAC trigger |
||
| 495 | * must be enabled using function @ref LL_DAC_EnableTrigger(). |
||
| 496 | * @note To set conversion trigger source, DAC channel must be disabled. |
||
| 497 | * Otherwise, the setting is discarded. |
||
| 498 | * @note Availability of parameters of trigger sources from timer |
||
| 499 | * depends on timers availability on the selected device. |
||
| 500 | * @rmtoll CR TSEL1 LL_DAC_SetTriggerSource\n |
||
| 501 | * CR TSEL2 LL_DAC_SetTriggerSource |
||
| 502 | * @param DACx DAC instance |
||
| 503 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 504 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 505 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 506 | * @param TriggerSource This parameter can be one of the following values: |
||
| 507 | * @arg @ref LL_DAC_TRIG_SOFTWARE |
||
| 508 | * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO |
||
| 509 | * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO |
||
| 510 | * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO |
||
| 511 | * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO |
||
| 512 | * @arg @ref LL_DAC_TRIG_EXT_TIM9_TRGO |
||
| 513 | * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 |
||
| 514 | * @retval None |
||
| 515 | */ |
||
| 516 | __STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriggerSource) |
||
| 517 | { |
||
| 518 | MODIFY_REG(DACx->CR, |
||
| 519 | DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), |
||
| 520 | TriggerSource << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 521 | } |
||
| 522 | |||
| 523 | /** |
||
| 524 | * @brief Get the conversion trigger source for the selected DAC channel. |
||
| 525 | * @note For conversion trigger source to be effective, DAC trigger |
||
| 526 | * must be enabled using function @ref LL_DAC_EnableTrigger(). |
||
| 527 | * @note Availability of parameters of trigger sources from timer |
||
| 528 | * depends on timers availability on the selected device. |
||
| 529 | * @rmtoll CR TSEL1 LL_DAC_GetTriggerSource\n |
||
| 530 | * CR TSEL2 LL_DAC_GetTriggerSource |
||
| 531 | * @param DACx DAC instance |
||
| 532 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 533 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 534 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 535 | * @retval Returned value can be one of the following values: |
||
| 536 | * @arg @ref LL_DAC_TRIG_SOFTWARE |
||
| 537 | * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO |
||
| 538 | * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO |
||
| 539 | * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO |
||
| 540 | * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO |
||
| 541 | * @arg @ref LL_DAC_TRIG_EXT_TIM9_TRGO |
||
| 542 | * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9 |
||
| 543 | */ |
||
| 544 | __STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 545 | { |
||
| 546 | return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) |
||
| 547 | >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) |
||
| 548 | ); |
||
| 549 | } |
||
| 550 | |||
| 551 | /** |
||
| 552 | * @brief Set the waveform automatic generation mode |
||
| 553 | * for the selected DAC channel. |
||
| 554 | * @rmtoll CR WAVE1 LL_DAC_SetWaveAutoGeneration\n |
||
| 555 | * CR WAVE2 LL_DAC_SetWaveAutoGeneration |
||
| 556 | * @param DACx DAC instance |
||
| 557 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 558 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 559 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 560 | * @param WaveAutoGeneration This parameter can be one of the following values: |
||
| 561 | * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE |
||
| 562 | * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE |
||
| 563 | * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE |
||
| 564 | * @retval None |
||
| 565 | */ |
||
| 566 | __STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t WaveAutoGeneration) |
||
| 567 | { |
||
| 568 | MODIFY_REG(DACx->CR, |
||
| 569 | DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), |
||
| 570 | WaveAutoGeneration << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 571 | } |
||
| 572 | |||
| 573 | /** |
||
| 574 | * @brief Get the waveform automatic generation mode |
||
| 575 | * for the selected DAC channel. |
||
| 576 | * @rmtoll CR WAVE1 LL_DAC_GetWaveAutoGeneration\n |
||
| 577 | * CR WAVE2 LL_DAC_GetWaveAutoGeneration |
||
| 578 | * @param DACx DAC instance |
||
| 579 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 580 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 581 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 582 | * @retval Returned value can be one of the following values: |
||
| 583 | * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE |
||
| 584 | * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE |
||
| 585 | * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE |
||
| 586 | */ |
||
| 587 | __STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 588 | { |
||
| 589 | return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) |
||
| 590 | >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) |
||
| 591 | ); |
||
| 592 | } |
||
| 593 | |||
| 594 | /** |
||
| 595 | * @brief Set the noise waveform generation for the selected DAC channel: |
||
| 596 | * Noise mode and parameters LFSR (linear feedback shift register). |
||
| 597 | * @note For wave generation to be effective, DAC channel |
||
| 598 | * wave generation mode must be enabled using |
||
| 599 | * function @ref LL_DAC_SetWaveAutoGeneration(). |
||
| 600 | * @note This setting can be set when the selected DAC channel is disabled |
||
| 601 | * (otherwise, the setting operation is ignored). |
||
| 602 | * @rmtoll CR MAMP1 LL_DAC_SetWaveNoiseLFSR\n |
||
| 603 | * CR MAMP2 LL_DAC_SetWaveNoiseLFSR |
||
| 604 | * @param DACx DAC instance |
||
| 605 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 606 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 607 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 608 | * @param NoiseLFSRMask This parameter can be one of the following values: |
||
| 609 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 |
||
| 610 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 |
||
| 611 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 |
||
| 612 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 |
||
| 613 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 |
||
| 614 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 |
||
| 615 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 |
||
| 616 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 |
||
| 617 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 |
||
| 618 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 |
||
| 619 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 |
||
| 620 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 |
||
| 621 | * @retval None |
||
| 622 | */ |
||
| 623 | __STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t NoiseLFSRMask) |
||
| 624 | { |
||
| 625 | MODIFY_REG(DACx->CR, |
||
| 626 | DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), |
||
| 627 | NoiseLFSRMask << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 628 | } |
||
| 629 | |||
| 630 | /** |
||
| 631 | * @brief Get the noise waveform generation for the selected DAC channel: |
||
| 632 | * Noise mode and parameters LFSR (linear feedback shift register). |
||
| 633 | * @rmtoll CR MAMP1 LL_DAC_GetWaveNoiseLFSR\n |
||
| 634 | * CR MAMP2 LL_DAC_GetWaveNoiseLFSR |
||
| 635 | * @param DACx DAC instance |
||
| 636 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 637 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 638 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 639 | * @retval Returned value can be one of the following values: |
||
| 640 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 |
||
| 641 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 |
||
| 642 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 |
||
| 643 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 |
||
| 644 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 |
||
| 645 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 |
||
| 646 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 |
||
| 647 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 |
||
| 648 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 |
||
| 649 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 |
||
| 650 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 |
||
| 651 | * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 |
||
| 652 | */ |
||
| 653 | __STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 654 | { |
||
| 655 | return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) |
||
| 656 | >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) |
||
| 657 | ); |
||
| 658 | } |
||
| 659 | |||
| 660 | /** |
||
| 661 | * @brief Set the triangle waveform generation for the selected DAC channel: |
||
| 662 | * triangle mode and amplitude. |
||
| 663 | * @note For wave generation to be effective, DAC channel |
||
| 664 | * wave generation mode must be enabled using |
||
| 665 | * function @ref LL_DAC_SetWaveAutoGeneration(). |
||
| 666 | * @note This setting can be set when the selected DAC channel is disabled |
||
| 667 | * (otherwise, the setting operation is ignored). |
||
| 668 | * @rmtoll CR MAMP1 LL_DAC_SetWaveTriangleAmplitude\n |
||
| 669 | * CR MAMP2 LL_DAC_SetWaveTriangleAmplitude |
||
| 670 | * @param DACx DAC instance |
||
| 671 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 672 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 673 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 674 | * @param TriangleAmplitude This parameter can be one of the following values: |
||
| 675 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 |
||
| 676 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 |
||
| 677 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 |
||
| 678 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 |
||
| 679 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 |
||
| 680 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 |
||
| 681 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 |
||
| 682 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 |
||
| 683 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 |
||
| 684 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 |
||
| 685 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 |
||
| 686 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 |
||
| 687 | * @retval None |
||
| 688 | */ |
||
| 689 | __STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel, |
||
| 690 | uint32_t TriangleAmplitude) |
||
| 691 | { |
||
| 692 | MODIFY_REG(DACx->CR, |
||
| 693 | DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), |
||
| 694 | TriangleAmplitude << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 695 | } |
||
| 696 | |||
| 697 | /** |
||
| 698 | * @brief Get the triangle waveform generation for the selected DAC channel: |
||
| 699 | * triangle mode and amplitude. |
||
| 700 | * @rmtoll CR MAMP1 LL_DAC_GetWaveTriangleAmplitude\n |
||
| 701 | * CR MAMP2 LL_DAC_GetWaveTriangleAmplitude |
||
| 702 | * @param DACx DAC instance |
||
| 703 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 704 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 705 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 706 | * @retval Returned value can be one of the following values: |
||
| 707 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 |
||
| 708 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 |
||
| 709 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 |
||
| 710 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 |
||
| 711 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 |
||
| 712 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 |
||
| 713 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 |
||
| 714 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 |
||
| 715 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 |
||
| 716 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 |
||
| 717 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 |
||
| 718 | * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 |
||
| 719 | */ |
||
| 720 | __STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 721 | { |
||
| 722 | return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) |
||
| 723 | >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) |
||
| 724 | ); |
||
| 725 | } |
||
| 726 | |||
| 727 | /** |
||
| 728 | * @brief Set the output buffer for the selected DAC channel. |
||
| 729 | * @rmtoll CR BOFF1 LL_DAC_SetOutputBuffer\n |
||
| 730 | * CR BOFF2 LL_DAC_SetOutputBuffer |
||
| 731 | * @param DACx DAC instance |
||
| 732 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 733 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 734 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 735 | * @param OutputBuffer This parameter can be one of the following values: |
||
| 736 | * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE |
||
| 737 | * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE |
||
| 738 | * @retval None |
||
| 739 | */ |
||
| 740 | __STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputBuffer) |
||
| 741 | { |
||
| 742 | MODIFY_REG(DACx->CR, |
||
| 743 | DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), |
||
| 744 | OutputBuffer << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 745 | } |
||
| 746 | |||
| 747 | /** |
||
| 748 | * @brief Get the output buffer state for the selected DAC channel. |
||
| 749 | * @rmtoll CR BOFF1 LL_DAC_GetOutputBuffer\n |
||
| 750 | * CR BOFF2 LL_DAC_GetOutputBuffer |
||
| 751 | * @param DACx DAC instance |
||
| 752 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 753 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 754 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 755 | * @retval Returned value can be one of the following values: |
||
| 756 | * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE |
||
| 757 | * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE |
||
| 758 | */ |
||
| 759 | __STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 760 | { |
||
| 761 | return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) |
||
| 762 | >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) |
||
| 763 | ); |
||
| 764 | } |
||
| 765 | |||
| 766 | /** |
||
| 767 | * @} |
||
| 768 | */ |
||
| 769 | |||
| 770 | /** @defgroup DAC_LL_EF_DMA_Management DMA Management |
||
| 771 | * @{ |
||
| 772 | */ |
||
| 773 | |||
| 774 | /** |
||
| 775 | * @brief Enable DAC DMA transfer request of the selected channel. |
||
| 776 | * @note To configure DMA source address (peripheral address), |
||
| 777 | * use function @ref LL_DAC_DMA_GetRegAddr(). |
||
| 778 | * @rmtoll CR DMAEN1 LL_DAC_EnableDMAReq\n |
||
| 779 | * CR DMAEN2 LL_DAC_EnableDMAReq |
||
| 780 | * @param DACx DAC instance |
||
| 781 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 782 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 783 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 784 | * @retval None |
||
| 785 | */ |
||
| 786 | __STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 787 | { |
||
| 788 | SET_BIT(DACx->CR, |
||
| 789 | DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 790 | } |
||
| 791 | |||
| 792 | /** |
||
| 793 | * @brief Disable DAC DMA transfer request of the selected channel. |
||
| 794 | * @note To configure DMA source address (peripheral address), |
||
| 795 | * use function @ref LL_DAC_DMA_GetRegAddr(). |
||
| 796 | * @rmtoll CR DMAEN1 LL_DAC_DisableDMAReq\n |
||
| 797 | * CR DMAEN2 LL_DAC_DisableDMAReq |
||
| 798 | * @param DACx DAC instance |
||
| 799 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 800 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 801 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 802 | * @retval None |
||
| 803 | */ |
||
| 804 | __STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 805 | { |
||
| 806 | CLEAR_BIT(DACx->CR, |
||
| 807 | DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 808 | } |
||
| 809 | |||
| 810 | /** |
||
| 811 | * @brief Get DAC DMA transfer request state of the selected channel. |
||
| 812 | * (0: DAC DMA transfer request is disabled, 1: DAC DMA transfer request is enabled) |
||
| 813 | * @rmtoll CR DMAEN1 LL_DAC_IsDMAReqEnabled\n |
||
| 814 | * CR DMAEN2 LL_DAC_IsDMAReqEnabled |
||
| 815 | * @param DACx DAC instance |
||
| 816 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 817 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 818 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 819 | * @retval State of bit (1 or 0). |
||
| 820 | */ |
||
| 821 | __STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 822 | { |
||
| 823 | return ((READ_BIT(DACx->CR, |
||
| 824 | DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) |
||
| 825 | == (DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); |
||
| 826 | } |
||
| 827 | |||
| 828 | /** |
||
| 829 | * @brief Function to help to configure DMA transfer to DAC: retrieve the |
||
| 830 | * DAC register address from DAC instance and a list of DAC registers |
||
| 831 | * intended to be used (most commonly) with DMA transfer. |
||
| 832 | * @note These DAC registers are data holding registers: |
||
| 833 | * when DAC conversion is requested, DAC generates a DMA transfer |
||
| 834 | * request to have data available in DAC data holding registers. |
||
| 835 | * @note This macro is intended to be used with LL DMA driver, refer to |
||
| 836 | * function "LL_DMA_ConfigAddresses()". |
||
| 837 | * Example: |
||
| 838 | * LL_DMA_ConfigAddresses(DMA1, |
||
| 839 | * LL_DMA_CHANNEL_1, |
||
| 840 | * (uint32_t)&< array or variable >, |
||
| 841 | * LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1, |
||
| 842 | * LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED), |
||
| 843 | * LL_DMA_DIRECTION_MEMORY_TO_PERIPH); |
||
| 844 | * @rmtoll DHR12R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n |
||
| 845 | * DHR12L1 DACC1DHR LL_DAC_DMA_GetRegAddr\n |
||
| 846 | * DHR8R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n |
||
| 847 | * DHR12R2 DACC2DHR LL_DAC_DMA_GetRegAddr\n |
||
| 848 | * DHR12L2 DACC2DHR LL_DAC_DMA_GetRegAddr\n |
||
| 849 | * DHR8R2 DACC2DHR LL_DAC_DMA_GetRegAddr |
||
| 850 | * @param DACx DAC instance |
||
| 851 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 852 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 853 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 854 | * @param Register This parameter can be one of the following values: |
||
| 855 | * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED |
||
| 856 | * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED |
||
| 857 | * @arg @ref LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED |
||
| 858 | * @retval DAC register address |
||
| 859 | */ |
||
| 860 | __STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(const DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Register) |
||
| 861 | { |
||
| 862 | /* Retrieve address of register DHR12Rx, DHR12Lx or DHR8Rx depending on */ |
||
| 863 | /* DAC channel selected. */ |
||
| 864 | return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1, ((DAC_Channel >> (Register & 0x1FUL)) |
||
| 865 | & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0)))); |
||
| 866 | } |
||
| 867 | /** |
||
| 868 | * @} |
||
| 869 | */ |
||
| 870 | |||
| 871 | /** @defgroup DAC_LL_EF_Operation Operation on DAC channels |
||
| 872 | * @{ |
||
| 873 | */ |
||
| 874 | |||
| 875 | /** |
||
| 876 | * @brief Enable DAC selected channel. |
||
| 877 | * @rmtoll CR EN1 LL_DAC_Enable\n |
||
| 878 | * CR EN2 LL_DAC_Enable |
||
| 879 | * @note After enable from off state, DAC channel requires a delay |
||
| 880 | * for output voltage to reach accuracy +/- 1 LSB. |
||
| 881 | * Refer to device datasheet, parameter "tWAKEUP". |
||
| 882 | * @param DACx DAC instance |
||
| 883 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 884 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 885 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 886 | * @retval None |
||
| 887 | */ |
||
| 888 | __STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 889 | { |
||
| 890 | SET_BIT(DACx->CR, |
||
| 891 | DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 892 | } |
||
| 893 | |||
| 894 | /** |
||
| 895 | * @brief Disable DAC selected channel. |
||
| 896 | * @rmtoll CR EN1 LL_DAC_Disable\n |
||
| 897 | * CR EN2 LL_DAC_Disable |
||
| 898 | * @param DACx DAC instance |
||
| 899 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 900 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 901 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 902 | * @retval None |
||
| 903 | */ |
||
| 904 | __STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 905 | { |
||
| 906 | CLEAR_BIT(DACx->CR, |
||
| 907 | DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 908 | } |
||
| 909 | |||
| 910 | /** |
||
| 911 | * @brief Get DAC enable state of the selected channel. |
||
| 912 | * (0: DAC channel is disabled, 1: DAC channel is enabled) |
||
| 913 | * @rmtoll CR EN1 LL_DAC_IsEnabled\n |
||
| 914 | * CR EN2 LL_DAC_IsEnabled |
||
| 915 | * @param DACx DAC instance |
||
| 916 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 917 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 918 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 919 | * @retval State of bit (1 or 0). |
||
| 920 | */ |
||
| 921 | __STATIC_INLINE uint32_t LL_DAC_IsEnabled(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 922 | { |
||
| 923 | return ((READ_BIT(DACx->CR, |
||
| 924 | DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) |
||
| 925 | == (DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); |
||
| 926 | } |
||
| 927 | |||
| 928 | /** |
||
| 929 | * @brief Enable DAC trigger of the selected channel. |
||
| 930 | * @note - If DAC trigger is disabled, DAC conversion is performed |
||
| 931 | * automatically once the data holding register is updated, |
||
| 932 | * using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": |
||
| 933 | * @ref LL_DAC_ConvertData12RightAligned(), ... |
||
| 934 | * - If DAC trigger is enabled, DAC conversion is performed |
||
| 935 | * only when a hardware of software trigger event is occurring. |
||
| 936 | * Select trigger source using |
||
| 937 | * function @ref LL_DAC_SetTriggerSource(). |
||
| 938 | * @rmtoll CR TEN1 LL_DAC_EnableTrigger\n |
||
| 939 | * CR TEN2 LL_DAC_EnableTrigger |
||
| 940 | * @param DACx DAC instance |
||
| 941 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 942 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 943 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 944 | * @retval None |
||
| 945 | */ |
||
| 946 | __STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 947 | { |
||
| 948 | SET_BIT(DACx->CR, |
||
| 949 | DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 950 | } |
||
| 951 | |||
| 952 | /** |
||
| 953 | * @brief Disable DAC trigger of the selected channel. |
||
| 954 | * @rmtoll CR TEN1 LL_DAC_DisableTrigger\n |
||
| 955 | * CR TEN2 LL_DAC_DisableTrigger |
||
| 956 | * @param DACx DAC instance |
||
| 957 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 958 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 959 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 960 | * @retval None |
||
| 961 | */ |
||
| 962 | __STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 963 | { |
||
| 964 | CLEAR_BIT(DACx->CR, |
||
| 965 | DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); |
||
| 966 | } |
||
| 967 | |||
| 968 | /** |
||
| 969 | * @brief Get DAC trigger state of the selected channel. |
||
| 970 | * (0: DAC trigger is disabled, 1: DAC trigger is enabled) |
||
| 971 | * @rmtoll CR TEN1 LL_DAC_IsTriggerEnabled\n |
||
| 972 | * CR TEN2 LL_DAC_IsTriggerEnabled |
||
| 973 | * @param DACx DAC instance |
||
| 974 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 975 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 976 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 977 | * @retval State of bit (1 or 0). |
||
| 978 | */ |
||
| 979 | __STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 980 | { |
||
| 981 | return ((READ_BIT(DACx->CR, |
||
| 982 | DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) |
||
| 983 | == (DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); |
||
| 984 | } |
||
| 985 | |||
| 986 | /** |
||
| 987 | * @brief Trig DAC conversion by software for the selected DAC channel. |
||
| 988 | * @note Preliminarily, DAC trigger must be set to software trigger |
||
| 989 | * using function |
||
| 990 | * @ref LL_DAC_Init() |
||
| 991 | * @ref LL_DAC_SetTriggerSource() |
||
| 992 | * with parameter "LL_DAC_TRIGGER_SOFTWARE". |
||
| 993 | * and DAC trigger must be enabled using |
||
| 994 | * function @ref LL_DAC_EnableTrigger(). |
||
| 995 | * @note For devices featuring DAC with 2 channels: this function |
||
| 996 | * can perform a SW start of both DAC channels simultaneously. |
||
| 997 | * Two channels can be selected as parameter. |
||
| 998 | * Example: (LL_DAC_CHANNEL_1 | LL_DAC_CHANNEL_2) |
||
| 999 | * @rmtoll SWTRIGR SWTRIG1 LL_DAC_TrigSWConversion\n |
||
| 1000 | * SWTRIGR SWTRIG2 LL_DAC_TrigSWConversion |
||
| 1001 | * @param DACx DAC instance |
||
| 1002 | * @param DAC_Channel This parameter can a combination of the following values: |
||
| 1003 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 1004 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 1005 | * @retval None |
||
| 1006 | */ |
||
| 1007 | __STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 1008 | { |
||
| 1009 | SET_BIT(DACx->SWTRIGR, |
||
| 1010 | (DAC_Channel & DAC_SWTR_CHX_MASK)); |
||
| 1011 | } |
||
| 1012 | |||
| 1013 | /** |
||
| 1014 | * @brief Set the data to be loaded in the data holding register |
||
| 1015 | * in format 12 bits left alignment (LSB aligned on bit 0), |
||
| 1016 | * for the selected DAC channel. |
||
| 1017 | * @rmtoll DHR12R1 DACC1DHR LL_DAC_ConvertData12RightAligned\n |
||
| 1018 | * DHR12R2 DACC2DHR LL_DAC_ConvertData12RightAligned |
||
| 1019 | * @param DACx DAC instance |
||
| 1020 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 1021 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 1022 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 1023 | * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF |
||
| 1024 | * @retval None |
||
| 1025 | */ |
||
| 1026 | __STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) |
||
| 1027 | { |
||
| 1028 | __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS) |
||
| 1029 | & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); |
||
| 1030 | |||
| 1031 | MODIFY_REG(*preg, DAC_DHR12R1_DACC1DHR, Data); |
||
| 1032 | } |
||
| 1033 | |||
| 1034 | /** |
||
| 1035 | * @brief Set the data to be loaded in the data holding register |
||
| 1036 | * in format 12 bits left alignment (MSB aligned on bit 15), |
||
| 1037 | * for the selected DAC channel. |
||
| 1038 | * @rmtoll DHR12L1 DACC1DHR LL_DAC_ConvertData12LeftAligned\n |
||
| 1039 | * DHR12L2 DACC2DHR LL_DAC_ConvertData12LeftAligned |
||
| 1040 | * @param DACx DAC instance |
||
| 1041 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 1042 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 1043 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 1044 | * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF |
||
| 1045 | * @retval None |
||
| 1046 | */ |
||
| 1047 | __STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) |
||
| 1048 | { |
||
| 1049 | __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS) |
||
| 1050 | & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); |
||
| 1051 | |||
| 1052 | MODIFY_REG(*preg, DAC_DHR12L1_DACC1DHR, Data); |
||
| 1053 | } |
||
| 1054 | |||
| 1055 | /** |
||
| 1056 | * @brief Set the data to be loaded in the data holding register |
||
| 1057 | * in format 8 bits left alignment (LSB aligned on bit 0), |
||
| 1058 | * for the selected DAC channel. |
||
| 1059 | * @rmtoll DHR8R1 DACC1DHR LL_DAC_ConvertData8RightAligned\n |
||
| 1060 | * DHR8R2 DACC2DHR LL_DAC_ConvertData8RightAligned |
||
| 1061 | * @param DACx DAC instance |
||
| 1062 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 1063 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 1064 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 1065 | * @param Data Value between Min_Data=0x00 and Max_Data=0xFF |
||
| 1066 | * @retval None |
||
| 1067 | */ |
||
| 1068 | __STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) |
||
| 1069 | { |
||
| 1070 | __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS) |
||
| 1071 | & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0); |
||
| 1072 | |||
| 1073 | MODIFY_REG(*preg, DAC_DHR8R1_DACC1DHR, Data); |
||
| 1074 | } |
||
| 1075 | |||
| 1076 | |||
| 1077 | /** |
||
| 1078 | * @brief Set the data to be loaded in the data holding register |
||
| 1079 | * in format 12 bits left alignment (LSB aligned on bit 0), |
||
| 1080 | * for both DAC channels. |
||
| 1081 | * @rmtoll DHR12RD DACC1DHR LL_DAC_ConvertDualData12RightAligned\n |
||
| 1082 | * DHR12RD DACC2DHR LL_DAC_ConvertDualData12RightAligned |
||
| 1083 | * @param DACx DAC instance |
||
| 1084 | * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF |
||
| 1085 | * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF |
||
| 1086 | * @retval None |
||
| 1087 | */ |
||
| 1088 | __STATIC_INLINE void LL_DAC_ConvertDualData12RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, |
||
| 1089 | uint32_t DataChannel2) |
||
| 1090 | { |
||
| 1091 | MODIFY_REG(DACx->DHR12RD, |
||
| 1092 | (DAC_DHR12RD_DACC2DHR | DAC_DHR12RD_DACC1DHR), |
||
| 1093 | ((DataChannel2 << DAC_DHR12RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); |
||
| 1094 | } |
||
| 1095 | |||
| 1096 | /** |
||
| 1097 | * @brief Set the data to be loaded in the data holding register |
||
| 1098 | * in format 12 bits left alignment (MSB aligned on bit 15), |
||
| 1099 | * for both DAC channels. |
||
| 1100 | * @rmtoll DHR12LD DACC1DHR LL_DAC_ConvertDualData12LeftAligned\n |
||
| 1101 | * DHR12LD DACC2DHR LL_DAC_ConvertDualData12LeftAligned |
||
| 1102 | * @param DACx DAC instance |
||
| 1103 | * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF |
||
| 1104 | * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF |
||
| 1105 | * @retval None |
||
| 1106 | */ |
||
| 1107 | __STATIC_INLINE void LL_DAC_ConvertDualData12LeftAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, |
||
| 1108 | uint32_t DataChannel2) |
||
| 1109 | { |
||
| 1110 | /* Note: Data of DAC channel 2 shift value subtracted of 4 because */ |
||
| 1111 | /* data on 16 bits and DAC channel 2 bits field is on the 12 MSB, */ |
||
| 1112 | /* the 4 LSB must be taken into account for the shift value. */ |
||
| 1113 | MODIFY_REG(DACx->DHR12LD, |
||
| 1114 | (DAC_DHR12LD_DACC2DHR | DAC_DHR12LD_DACC1DHR), |
||
| 1115 | ((DataChannel2 << (DAC_DHR12LD_DACC2DHR_BITOFFSET_POS - 4U)) | DataChannel1)); |
||
| 1116 | } |
||
| 1117 | |||
| 1118 | /** |
||
| 1119 | * @brief Set the data to be loaded in the data holding register |
||
| 1120 | * in format 8 bits left alignment (LSB aligned on bit 0), |
||
| 1121 | * for both DAC channels. |
||
| 1122 | * @rmtoll DHR8RD DACC1DHR LL_DAC_ConvertDualData8RightAligned\n |
||
| 1123 | * DHR8RD DACC2DHR LL_DAC_ConvertDualData8RightAligned |
||
| 1124 | * @param DACx DAC instance |
||
| 1125 | * @param DataChannel1 Value between Min_Data=0x00 and Max_Data=0xFF |
||
| 1126 | * @param DataChannel2 Value between Min_Data=0x00 and Max_Data=0xFF |
||
| 1127 | * @retval None |
||
| 1128 | */ |
||
| 1129 | __STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, |
||
| 1130 | uint32_t DataChannel2) |
||
| 1131 | { |
||
| 1132 | MODIFY_REG(DACx->DHR8RD, |
||
| 1133 | (DAC_DHR8RD_DACC2DHR | DAC_DHR8RD_DACC1DHR), |
||
| 1134 | ((DataChannel2 << DAC_DHR8RD_DACC2DHR_BITOFFSET_POS) | DataChannel1)); |
||
| 1135 | } |
||
| 1136 | |||
| 1137 | |||
| 1138 | /** |
||
| 1139 | * @brief Retrieve output data currently generated for the selected DAC channel. |
||
| 1140 | * @note Whatever alignment and resolution settings |
||
| 1141 | * (using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": |
||
| 1142 | * @ref LL_DAC_ConvertData12RightAligned(), ...), |
||
| 1143 | * output data format is 12 bits right aligned (LSB aligned on bit 0). |
||
| 1144 | * @rmtoll DOR1 DACC1DOR LL_DAC_RetrieveOutputData\n |
||
| 1145 | * DOR2 DACC2DOR LL_DAC_RetrieveOutputData |
||
| 1146 | * @param DACx DAC instance |
||
| 1147 | * @param DAC_Channel This parameter can be one of the following values: |
||
| 1148 | * @arg @ref LL_DAC_CHANNEL_1 |
||
| 1149 | * @arg @ref LL_DAC_CHANNEL_2 |
||
| 1150 | * @retval Value between Min_Data=0x000 and Max_Data=0xFFF |
||
| 1151 | */ |
||
| 1152 | __STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(const DAC_TypeDef *DACx, uint32_t DAC_Channel) |
||
| 1153 | { |
||
| 1154 | __IO uint32_t const *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, (DAC_Channel >> DAC_REG_DORX_REGOFFSET_BITOFFSET_POS) |
||
| 1155 | & DAC_REG_DORX_REGOFFSET_MASK_POSBIT0); |
||
| 1156 | |||
| 1157 | return (uint16_t) READ_BIT(*preg, DAC_DOR1_DACC1DOR); |
||
| 1158 | } |
||
| 1159 | |||
| 1160 | /** |
||
| 1161 | * @} |
||
| 1162 | */ |
||
| 1163 | |||
| 1164 | /** @defgroup DAC_LL_EF_FLAG_Management FLAG Management |
||
| 1165 | * @{ |
||
| 1166 | */ |
||
| 1167 | |||
| 1168 | /** |
||
| 1169 | * @brief Get DAC underrun flag for DAC channel 1 |
||
| 1170 | * @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1 |
||
| 1171 | * @param DACx DAC instance |
||
| 1172 | * @retval State of bit (1 or 0). |
||
| 1173 | */ |
||
| 1174 | __STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR1(const DAC_TypeDef *DACx) |
||
| 1175 | { |
||
| 1176 | return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR1) == (LL_DAC_FLAG_DMAUDR1)) ? 1UL : 0UL); |
||
| 1177 | } |
||
| 1178 | |||
| 1179 | |||
| 1180 | /** |
||
| 1181 | * @brief Get DAC underrun flag for DAC channel 2 |
||
| 1182 | * @rmtoll SR DMAUDR2 LL_DAC_IsActiveFlag_DMAUDR2 |
||
| 1183 | * @param DACx DAC instance |
||
| 1184 | * @retval State of bit (1 or 0). |
||
| 1185 | */ |
||
| 1186 | __STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR2(const DAC_TypeDef *DACx) |
||
| 1187 | { |
||
| 1188 | return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR2) == (LL_DAC_FLAG_DMAUDR2)) ? 1UL : 0UL); |
||
| 1189 | } |
||
| 1190 | |||
| 1191 | |||
| 1192 | /** |
||
| 1193 | * @brief Clear DAC underrun flag for DAC channel 1 |
||
| 1194 | * @rmtoll SR DMAUDR1 LL_DAC_ClearFlag_DMAUDR1 |
||
| 1195 | * @param DACx DAC instance |
||
| 1196 | * @retval None |
||
| 1197 | */ |
||
| 1198 | __STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR1(DAC_TypeDef *DACx) |
||
| 1199 | { |
||
| 1200 | WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR1); |
||
| 1201 | } |
||
| 1202 | |||
| 1203 | |||
| 1204 | /** |
||
| 1205 | * @brief Clear DAC underrun flag for DAC channel 2 |
||
| 1206 | * @rmtoll SR DMAUDR2 LL_DAC_ClearFlag_DMAUDR2 |
||
| 1207 | * @param DACx DAC instance |
||
| 1208 | * @retval None |
||
| 1209 | */ |
||
| 1210 | __STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx) |
||
| 1211 | { |
||
| 1212 | WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR2); |
||
| 1213 | } |
||
| 1214 | |||
| 1215 | |||
| 1216 | /** |
||
| 1217 | * @} |
||
| 1218 | */ |
||
| 1219 | |||
| 1220 | /** @defgroup DAC_LL_EF_IT_Management IT management |
||
| 1221 | * @{ |
||
| 1222 | */ |
||
| 1223 | |||
| 1224 | /** |
||
| 1225 | * @brief Enable DMA underrun interrupt for DAC channel 1 |
||
| 1226 | * @rmtoll CR DMAUDRIE1 LL_DAC_EnableIT_DMAUDR1 |
||
| 1227 | * @param DACx DAC instance |
||
| 1228 | * @retval None |
||
| 1229 | */ |
||
| 1230 | __STATIC_INLINE void LL_DAC_EnableIT_DMAUDR1(DAC_TypeDef *DACx) |
||
| 1231 | { |
||
| 1232 | SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); |
||
| 1233 | } |
||
| 1234 | |||
| 1235 | |||
| 1236 | /** |
||
| 1237 | * @brief Enable DMA underrun interrupt for DAC channel 2 |
||
| 1238 | * @rmtoll CR DMAUDRIE2 LL_DAC_EnableIT_DMAUDR2 |
||
| 1239 | * @param DACx DAC instance |
||
| 1240 | * @retval None |
||
| 1241 | */ |
||
| 1242 | __STATIC_INLINE void LL_DAC_EnableIT_DMAUDR2(DAC_TypeDef *DACx) |
||
| 1243 | { |
||
| 1244 | SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); |
||
| 1245 | } |
||
| 1246 | |||
| 1247 | |||
| 1248 | /** |
||
| 1249 | * @brief Disable DMA underrun interrupt for DAC channel 1 |
||
| 1250 | * @rmtoll CR DMAUDRIE1 LL_DAC_DisableIT_DMAUDR1 |
||
| 1251 | * @param DACx DAC instance |
||
| 1252 | * @retval None |
||
| 1253 | */ |
||
| 1254 | __STATIC_INLINE void LL_DAC_DisableIT_DMAUDR1(DAC_TypeDef *DACx) |
||
| 1255 | { |
||
| 1256 | CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1); |
||
| 1257 | } |
||
| 1258 | |||
| 1259 | |||
| 1260 | /** |
||
| 1261 | * @brief Disable DMA underrun interrupt for DAC channel 2 |
||
| 1262 | * @rmtoll CR DMAUDRIE2 LL_DAC_DisableIT_DMAUDR2 |
||
| 1263 | * @param DACx DAC instance |
||
| 1264 | * @retval None |
||
| 1265 | */ |
||
| 1266 | __STATIC_INLINE void LL_DAC_DisableIT_DMAUDR2(DAC_TypeDef *DACx) |
||
| 1267 | { |
||
| 1268 | CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2); |
||
| 1269 | } |
||
| 1270 | |||
| 1271 | |||
| 1272 | /** |
||
| 1273 | * @brief Get DMA underrun interrupt for DAC channel 1 |
||
| 1274 | * @rmtoll CR DMAUDRIE1 LL_DAC_IsEnabledIT_DMAUDR1 |
||
| 1275 | * @param DACx DAC instance |
||
| 1276 | * @retval State of bit (1 or 0). |
||
| 1277 | */ |
||
| 1278 | __STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR1(const DAC_TypeDef *DACx) |
||
| 1279 | { |
||
| 1280 | return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1) == (LL_DAC_IT_DMAUDRIE1)) ? 1UL : 0UL); |
||
| 1281 | } |
||
| 1282 | |||
| 1283 | |||
| 1284 | /** |
||
| 1285 | * @brief Get DMA underrun interrupt for DAC channel 2 |
||
| 1286 | * @rmtoll CR DMAUDRIE2 LL_DAC_IsEnabledIT_DMAUDR2 |
||
| 1287 | * @param DACx DAC instance |
||
| 1288 | * @retval State of bit (1 or 0). |
||
| 1289 | */ |
||
| 1290 | __STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR2(const DAC_TypeDef *DACx) |
||
| 1291 | { |
||
| 1292 | return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2) == (LL_DAC_IT_DMAUDRIE2)) ? 1UL : 0UL); |
||
| 1293 | } |
||
| 1294 | |||
| 1295 | |||
| 1296 | /** |
||
| 1297 | * @} |
||
| 1298 | */ |
||
| 1299 | |||
| 1300 | #if defined(USE_FULL_LL_DRIVER) |
||
| 1301 | /** @defgroup DAC_LL_EF_Init Initialization and de-initialization functions |
||
| 1302 | * @{ |
||
| 1303 | */ |
||
| 1304 | |||
| 1305 | ErrorStatus LL_DAC_DeInit(const DAC_TypeDef *DACx); |
||
| 1306 | ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, const LL_DAC_InitTypeDef *DAC_InitStruct); |
||
| 1307 | void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct); |
||
| 1308 | |||
| 1309 | /** |
||
| 1310 | * @} |
||
| 1311 | */ |
||
| 1312 | #endif /* USE_FULL_LL_DRIVER */ |
||
| 1313 | |||
| 1314 | /** |
||
| 1315 | * @} |
||
| 1316 | */ |
||
| 1317 | |||
| 1318 | /** |
||
| 1319 | * @} |
||
| 1320 | */ |
||
| 1321 | |||
| 1322 | #endif /* DAC1 */ |
||
| 1323 | |||
| 1324 | /** |
||
| 1325 | * @} |
||
| 1326 | */ |
||
| 1327 | |||
| 1328 | #ifdef __cplusplus |
||
| 1329 | } |
||
| 1330 | #endif |
||
| 1331 | |||
| 1332 | #endif /* STM32L1xx_LL_DAC_H */ |