WebSVN – DashDisplay – Blame – /branches/Dashboard_L152_210623/Src/main.c

Rev	Author	Line No.	Line
50	mjames	1	/* USER CODE BEGIN Header */
2	mjames	2	/**
52	mjames	3	******************************************************************************
		4	* @file : main.c
		5	* @brief : Main program body
		6	******************************************************************************
		7	* @attention
		8	*
		9	* <h2><center>© Copyright (c) 2020 STMicroelectronics.
		10	* All rights reserved.</center></h2>
		11	*
		12	* This software component is licensed by ST under BSD 3-Clause license,
		13	* the "License"; You may not use this file except in compliance with the
		14	* License. You may obtain a copy of the License at:
		15	* opensource.org/licenses/BSD-3-Clause
		16	*
		17	******************************************************************************
		18	*/
50	mjames	19	/* USER CODE END Header */
2	mjames	20	/* Includes ------------------------------------------------------------------*/
50	mjames	21	#include "main.h"
2	mjames	22
50	mjames	23	/* Private includes ----------------------------------------------------------*/
2	mjames	24	/* USER CODE BEGIN Includes */
50	mjames	25
		26	#include "libPLX/plx.h"
		27	#include "libSerial/serial.H"
		28	#include "libSmallPrintf/small_printf.h"
4	mjames	29	#include "switches.h"
2	mjames	30
		31	/* USER CODE END Includes */
		32
50	mjames	33	/* Private typedef -----------------------------------------------------------*/
		34	/* USER CODE BEGIN PTD */
		35
		36	/* USER CODE END PTD */
		37
		38	/* Private define ------------------------------------------------------------*/
		39	/* USER CODE BEGIN PD */
		40	/* USER CODE END PD */
		41
		42	/* Private macro -------------------------------------------------------------*/
		43	/* USER CODE BEGIN PM */
		44
		45	/* USER CODE END PM */
		46
2	mjames	47	/* Private variables ---------------------------------------------------------*/
		48	SPI_HandleTypeDef hspi1;
		49
50	mjames	50	TIM_HandleTypeDef htim2;
44	mjames	51	TIM_HandleTypeDef htim3;
		52	TIM_HandleTypeDef htim9;
		53
3	mjames	54	UART_HandleTypeDef huart1;
2	mjames	55	UART_HandleTypeDef huart2;
23	mjames	56	UART_HandleTypeDef huart3;
2	mjames	57
		58	/* USER CODE BEGIN PV */
		59	/* Private variables ---------------------------------------------------------*/
		60
50	mjames	61	context_t contexts[MAX_DISPLAYS];
		62
24	mjames	63	/* timeout when the ignition is switched off */
		64	#define IGNITION_OFF_TIMEOUT 30000UL
		65
52	mjames	66	#define LOGGER_INTERVAL 500UL
14	mjames	67
57	mjames	68	const int DialTimeout = 10000; // about 10 seconds after twiddle, save the dial position.
18	mjames	69
56	mjames	70	nvram_info_t dial_nvram[MAX_DISPLAYS] __attribute__((section(".NVRAM_Data")));
14	mjames	71
56	mjames	72	info_t Info[MAXRDG];
		73
		74	/// \brief storage for incoming data
50	mjames	75	data_t Data;
56	mjames	76
7	mjames	77	int PLXItems;
24	mjames	78
27	mjames	79	uint32_t Latch_Timer = IGNITION_OFF_TIMEOUT;
24	mjames	80
2	mjames	81	/* USER CODE END PV */
		82
		83	/* Private function prototypes -----------------------------------------------*/
52	mjames	84	void
		85	SystemClock_Config (void);
		86	static void
		87	MX_GPIO_Init (void);
		88	static void
		89	MX_SPI1_Init (void);
		90	static void
		91	MX_USART1_UART_Init (void);
		92	static void
		93	MX_USART2_UART_Init (void);
		94	static void
		95	MX_USART3_UART_Init (void);
		96	static void
		97	MX_TIM3_Init (void);
		98	static void
		99	MX_TIM9_Init (void);
		100	static void
		101	MX_TIM2_Init (void);
2	mjames	102	/* USER CODE BEGIN PFP */
		103
7	mjames	104	// the dial is the switch number we are using.
		105	// suppress is the ItemIndex we wish to suppress on this display
52	mjames	106	int
		107	DisplayCurrent (int dial, int suppress)
7	mjames	108	{
57	mjames	109	if (contexts[dial].knobPos < 0)
50	mjames	110	return -1;
57	mjames	111	return cc_display (dial, suppress);
50	mjames	112	}
30	mjames	113
53	mjames	114	void
		115	setBaud (usart_ctl *ctl, uint32_t baud)
		116	{
		117	ctl->handle->Init.BaudRate = baud;
		118	__disable_irq ();
		119	HAL_UART_Init (ctl->handle);
		120	__enable_irq ();
		121	}
		122
		123	void
		124	sendString (usart_ctl ctl, char string, int length)
		125	{
		126	int i;
		127	for (i = 0; i < length; i++)
		128	PutCharSerial (ctl, string[i]);
		129
		130	}
		131
56	mjames	132	/// \note this code doesnt work so it leaves speed as 9600.
		133	/// \brief Setup Bluetooth module
53	mjames	134	void
		135	initModule (usart_ctl *ctl, uint32_t baudRate)
		136	{
		137	char initBuf[30];
		138	// switch to command mode
		139	HAL_GPIO_WritePin (BT_BUTTON_GPIO_Port, BT_BUTTON_Pin, GPIO_PIN_RESET);
		140	HAL_Delay (500);
57	mjames	141	int initLen = small_sprintf (initBuf, "AT+UART=%l,1,2\n", baudRate);
53	mjames	142	setBaud (ctl, 38400);
		143	sendString (ctl, initBuf, initLen);
		144	TxWaitEmpty (ctl);
		145	// switch back to normal comms at new baud rate
		146
		147	HAL_GPIO_WritePin (BT_BUTTON_GPIO_Port, BT_BUTTON_Pin, GPIO_PIN_SET);
		148	setBaud (ctl, baudRate);
		149	HAL_Delay (100);
		150
		151	}
		152
50	mjames	153	/* USER CODE END PFP */
14	mjames	154
50	mjames	155	/* Private user code ---------------------------------------------------------*/
		156	/* USER CODE BEGIN 0 */
14	mjames	157
7	mjames	158	/* USER CODE END 0 */
2	mjames	159
50	mjames	160	/**
52	mjames	161	* @brief The application entry point.
		162	* @retval int
		163	*/
		164	int
		165	main (void)
7	mjames	166	{
16	mjames	167	/* USER CODE BEGIN 1 */
50	mjames	168	__HAL_RCC_SPI1_CLK_ENABLE()
		169	;
		170	__HAL_RCC_USART1_CLK_ENABLE()
		171	; // PLX main port
		172	__HAL_RCC_USART2_CLK_ENABLE()
		173	; // debug port
		174	__HAL_RCC_USART3_CLK_ENABLE ()
		175	; // Bluetooth port
2	mjames	176
50	mjames	177	__HAL_RCC_TIM3_CLK_ENABLE();
2	mjames	178
50	mjames	179	__HAL_RCC_TIM9_CLK_ENABLE();
23	mjames	180
16	mjames	181	/* USER CODE END 1 */
2	mjames	182
50	mjames	183	/* MCU Configuration--------------------------------------------------------*/
6	mjames	184
16	mjames	185	/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
52	mjames	186	HAL_Init ();
2	mjames	187
50	mjames	188	/* USER CODE BEGIN Init */
		189
		190	/* USER CODE END Init */
		191
16	mjames	192	/* Configure the system clock */
52	mjames	193	SystemClock_Config ();
2	mjames	194
50	mjames	195	/* USER CODE BEGIN SysInit */
		196
		197	/* USER CODE END SysInit */
		198
16	mjames	199	/* Initialize all configured peripherals */
52	mjames	200	MX_GPIO_Init ();
		201	MX_SPI1_Init ();
		202	MX_USART1_UART_Init ();
		203	MX_USART2_UART_Init ();
		204	MX_USART3_UART_Init ();
		205	MX_TIM3_Init ();
		206	MX_TIM9_Init ();
		207	MX_TIM2_Init ();
16	mjames	208	/* USER CODE BEGIN 2 */
2	mjames	209
50	mjames	210	/* Turn on USART1 IRQ */
52	mjames	211	HAL_NVIC_SetPriority (USART1_IRQn, 2, 0);
		212	HAL_NVIC_EnableIRQ (USART1_IRQn);
4	mjames	213
50	mjames	214	/* Turn on USART2 IRQ */
52	mjames	215	HAL_NVIC_SetPriority (USART2_IRQn, 4, 0);
		216	HAL_NVIC_EnableIRQ (USART2_IRQn);
2	mjames	217
50	mjames	218	/* turn on USART3 IRQ */
52	mjames	219	HAL_NVIC_SetPriority (USART3_IRQn, 4, 0);
		220	HAL_NVIC_EnableIRQ (USART3_IRQn);
4	mjames	221
50	mjames	222	/* setup the USART control blocks */
53	mjames	223	init_usart_ctl (&uc1, &huart1);
		224	init_usart_ctl (&uc2, &huart2);
		225	init_usart_ctl (&uc3, &huart3);
23	mjames	226
52	mjames	227	EnableSerialRxInterrupt (&uc1);
		228	EnableSerialRxInterrupt (&uc2);
		229	EnableSerialRxInterrupt (&uc3);
23	mjames	230
52	mjames	231	HAL_TIM_Encoder_Start (&htim3, TIM_CHANNEL_ALL);
23	mjames	232
52	mjames	233	HAL_TIM_Encoder_Start (&htim9, TIM_CHANNEL_ALL);
44	mjames	234
50	mjames	235	// Switch handler called on sysTick interrupt.
52	mjames	236	InitSwitches ();
2	mjames	237
56	mjames	238	initModule (&uc3, 9600);
53	mjames	239
52	mjames	240	cc_init ();
23	mjames	241
50	mjames	242	int i;
		243	for (i = 0; i < 2; i++)
52	mjames	244	{
57	mjames	245	dial_pos[i] = 0; // default to items 0 and 1
		246	contexts[i].knobPos = -1;
52	mjames	247	}
7	mjames	248
50	mjames	249	/* reset the display timeout, latch on power from accessories */
		250	Latch_Timer = IGNITION_OFF_TIMEOUT;
52	mjames	251	HAL_GPIO_WritePin (POWER_LATCH_GPIO_Port, POWER_LATCH_Pin, GPIO_PIN_RESET);
16	mjames	252
		253	/* USER CODE END 2 */
7	mjames	254
16	mjames	255	/* Infinite loop */
		256	/* USER CODE BEGIN WHILE */
52	mjames	257	while (1)
		258	{
7	mjames	259
52	mjames	260	/* while ignition is on, keep resetting power latch timer */
		261	if (HAL_GPIO_ReadPin (IGNITION_GPIO_Port, IGNITION_Pin) == GPIO_PIN_RESET)
		262	{
		263	Latch_Timer = HAL_GetTick () + IGNITION_OFF_TIMEOUT;
		264	}
		265	else
		266	{
		267	/* if the ignition has been off for a while, then turn off power */
		268	if (HAL_GetTick () > Latch_Timer)
		269	{
		270	HAL_GPIO_WritePin (POWER_LATCH_GPIO_Port, POWER_LATCH_Pin,
		271	GPIO_PIN_RESET);
		272	}
		273	}
27	mjames	274
52	mjames	275	uint32_t timeout = 0; //
27	mjames	276
52	mjames	277	uint32_t nextTick = HAL_GetTick () + LOGGER_INTERVAL;
		278	uint8_t log = 0;
		279	// PLX decoder protocols
		280	char PLXPacket = 0;
		281	for (i = 0; i < MAXRDG; i++)
		282	{
56	mjames	283	Info[i].Max = 0;
		284	Info[i].Min = 0xFFF; // 12 bit max value
52	mjames	285	}
27	mjames	286
52	mjames	287	int PLXPtr = 0;
24	mjames	288
52	mjames	289	while (1)
		290	{
53	mjames	291	// Handle the bluetooth pairing / reset function by pressing both buttons.
52	mjames	292	if ((push_pos[0] == 1) && (push_pos[1] == 1))
		293	{
		294	HAL_GPIO_WritePin (BT_BUTTON_GPIO_Port, BT_BUTTON_Pin,
		295	GPIO_PIN_RESET);
		296	}
		297	else
		298	{
		299	HAL_GPIO_WritePin (BT_BUTTON_GPIO_Port, BT_BUTTON_Pin,
		300	GPIO_PIN_SET);
		301	}
7	mjames	302
52	mjames	303	uint16_t cc = SerialCharsReceived (&uc1);
		304	int chr;
		305	if (cc == 0)
		306	{
		307	timeout++;
		308	if (timeout % 1000 == 0)
		309	{
		310	const char msg[] = "Timeout\r\n";
53	mjames	311	sendString (&uc3, msg, sizeof(msg));
38	mjames	312
52	mjames	313	}
38	mjames	314
52	mjames	315	if (timeout > 60000)
		316	{
7	mjames	317
52	mjames	318	// do turn off screen
		319	}
27	mjames	320
52	mjames	321	}
		322	for (chr = 0; chr < cc; chr++)
		323	{
		324	char c = GetCharSerial (&uc1);
7	mjames	325
52	mjames	326	if (c == PLX_Start) // at any time if the start byte appears, reset the pointers
		327	{
		328	PLXPtr = 0; // reset the pointer
		329	PLXPacket = 1;
		330	timeout = 0; // Reset the timer
		331	if (HAL_GetTick () > nextTick)
		332	{
		333	nextTick = HAL_GetTick () + LOGGER_INTERVAL;
		334	log = 1;
		335	}
		336	else
		337	log = 0;
		338	}
		339	else if (c == PLX_Stop)
		340	{
		341	if (PLXPacket)
		342	{
		343	// we can now decode the selected parameter
		344	PLXItems = PLXPtr / sizeof(PLX_SensorInfo); // total
		345	// saturate the rotary switch position
9	mjames	346
52	mjames	347	int DataVal;
		348	// process min/max
		349	for (i = 0; i < PLXItems; i++)
		350	{
56	mjames	351	Info[i].observation = ConvPLX (Data.Sensor[i].AddrH,
		352	Data.Sensor[i].AddrL);
		353	Info[i].instance = Data.Sensor[i].Instance;
		354	Info[i].data = ConvPLX (Data.Sensor[i].ReadingH,
		355	Data.Sensor[i].ReadingL);
		356	if (Info[i].data > Info[i].Max)
		357	{
		358	Info[i].Max = Info[i].data;
		359	}
		360	if (Info[i].data < Info[i].Min)
		361	{
		362	Info[i].Min = Info[i].data;
		363	}
23	mjames	364
56	mjames	365	// Send item to BT
		366
52	mjames	367	if (log)
		368	{
56	mjames	369
52	mjames	370	char outbuff[100];
30	mjames	371
57	mjames	372	int cnt = small_sprintf (outbuff,
		373	"$PLLOG,%d,%d,%d",
56	mjames	374	Info[i].observation,
		375	Info[i].instance,
		376	Info[i].data);
4	mjames	377
53	mjames	378	//checksum
52	mjames	379	int ck;
		380	int sum = 0;
53	mjames	381	for (ck = 1; ck < cnt; ck++)
52	mjames	382	sum += outbuff[ck];
53	mjames	383	cnt += small_sprintf (outbuff + cnt, "*%02X\n",
		384	sum & 0xFF);
		385	sendString (&uc3, outbuff, cnt);
50	mjames	386
52	mjames	387	}
		388	}
50	mjames	389
52	mjames	390	// now to display the information
		391	int suppress = DisplayCurrent (0, -1);
		392	DisplayCurrent (1, suppress);
		393	}
		394	PLXPtr = 0;
		395	PLXPacket = 0;
		396	}
		397	else if (c > PLX_Stop) // illegal char, restart reading
		398	{
		399	PLXPacket = 0;
		400	PLXPtr = 0;
		401	}
		402	else if (PLXPacket && PLXPtr < sizeof(Data.Bytes))
		403	{
		404	Data.Bytes[PLXPtr++] = c;
		405	}
		406
		407	}
		408
		409	HAL_Delay (1);
56	mjames	410
57	mjames	411	for (i = 0; i < MAX_DISPLAYS; i++)
		412	{
		413	if (dial_pos[i] > 1000)
		414	dial_pos[i] = PLXItems - 1;
		415	if (dial_pos[i] >= PLXItems)
		416	dial_pos[i] = 0;
56	mjames	417
57	mjames	418	int prevPos = contexts[i].knobPos;
		419	if (contexts[i].knobPos >= 0)
		420	contexts[i].knobPos = dial_pos[i];
		421	// if the dial position was changed then reset timer
		422	if (prevPos != contexts[i].knobPos)
		423	contexts[i].dial_timer = DialTimeout;
		424
		425	cc_check_nvram (i);
		426	if (contexts[i].knobPos >= 0)
		427	dial_pos[i] = contexts[i].knobPos;
		428	}
52	mjames	429	}
		430	/* USER CODE END WHILE */
		431
		432	/* USER CODE BEGIN 3 */
		433	}
16	mjames	434	/* USER CODE END 3 */
2	mjames	435	}
		436
50	mjames	437	/**
52	mjames	438	* @brief System Clock Configuration
		439	* @retval None
		440	*/
		441	void
		442	SystemClock_Config (void)
5	mjames	443	{
52	mjames	444	RCC_OscInitTypeDef RCC_OscInitStruct =
		445	{ 0 };
		446	RCC_ClkInitTypeDef RCC_ClkInitStruct =
		447	{ 0 };
2	mjames	448
50	mjames	449	/** Configure the main internal regulator output voltage
52	mjames	450	*/
29	mjames	451	__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
50	mjames	452	/** Initializes the RCC Oscillators according to the specified parameters
52	mjames	453	* in the RCC_OscInitTypeDef structure.
		454	*/
44	mjames	455	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
		456	RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
16	mjames	457	RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
44	mjames	458	RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
		459	RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12;
29	mjames	460	RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3;
52	mjames	461	if (HAL_RCC_OscConfig (&RCC_OscInitStruct) != HAL_OK)
		462	{
		463	Error_Handler ();
		464	}
50	mjames	465	/** Initializes the CPU, AHB and APB buses clocks
52	mjames	466	*/
		467	RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK \| RCC_CLOCKTYPE_SYSCLK
		468	\| RCC_CLOCKTYPE_PCLK1 \| RCC_CLOCKTYPE_PCLK2;
16	mjames	469	RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
		470	RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
29	mjames	471	RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
16	mjames	472	RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
50	mjames	473
52	mjames	474	if (HAL_RCC_ClockConfig (&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
		475	{
		476	Error_Handler ();
		477	}
2	mjames	478	}
		479
50	mjames	480	/**
52	mjames	481	* @brief SPI1 Initialization Function
		482	* @param None
		483	* @retval None
		484	*/
		485	static void
		486	MX_SPI1_Init (void)
5	mjames	487	{
2	mjames	488
50	mjames	489	/* USER CODE BEGIN SPI1_Init 0 */
		490
		491	/* USER CODE END SPI1_Init 0 */
		492
		493	/* USER CODE BEGIN SPI1_Init 1 */
		494
		495	/* USER CODE END SPI1_Init 1 */
		496	/* SPI1 parameter configuration*/
16	mjames	497	hspi1.Instance = SPI1;
		498	hspi1.Init.Mode = SPI_MODE_MASTER;
		499	hspi1.Init.Direction = SPI_DIRECTION_1LINE;
		500	hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
		501	hspi1.Init.CLKPolarity = SPI_POLARITY_HIGH;
		502	hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
		503	hspi1.Init.NSS = SPI_NSS_SOFT;
50	mjames	504	hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
16	mjames	505	hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
		506	hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
		507	hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
		508	hspi1.Init.CRCPolynomial = 10;
52	mjames	509	if (HAL_SPI_Init (&hspi1) != HAL_OK)
		510	{
		511	Error_Handler ();
		512	}
50	mjames	513	/* USER CODE BEGIN SPI1_Init 2 */
2	mjames	514
50	mjames	515	/* USER CODE END SPI1_Init 2 */
		516
2	mjames	517	}
		518
50	mjames	519	/**
52	mjames	520	* @brief TIM2 Initialization Function
		521	* @param None
		522	* @retval None
		523	*/
		524	static void
		525	MX_TIM2_Init (void)
50	mjames	526	{
		527
		528	/* USER CODE BEGIN TIM2_Init 0 */
		529
		530	/* USER CODE END TIM2_Init 0 */
		531
52	mjames	532	TIM_ClockConfigTypeDef sClockSourceConfig =
		533	{ 0 };
		534	TIM_MasterConfigTypeDef sMasterConfig =
		535	{ 0 };
50	mjames	536
		537	/* USER CODE BEGIN TIM2_Init 1 */
		538
		539	/* USER CODE END TIM2_Init 1 */
		540	htim2.Instance = TIM2;
		541	htim2.Init.Prescaler = 0;
		542	htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
		543	htim2.Init.Period = 65535;
		544	htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
		545	htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
52	mjames	546	if (HAL_TIM_Base_Init (&htim2) != HAL_OK)
		547	{
		548	Error_Handler ();
		549	}
50	mjames	550	sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
52	mjames	551	if (HAL_TIM_ConfigClockSource (&htim2, &sClockSourceConfig) != HAL_OK)
		552	{
		553	Error_Handler ();
		554	}
50	mjames	555	sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
		556	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
52	mjames	557	if (HAL_TIMEx_MasterConfigSynchronization (&htim2, &sMasterConfig) != HAL_OK)
		558	{
		559	Error_Handler ();
		560	}
50	mjames	561	/* USER CODE BEGIN TIM2_Init 2 */
		562
		563	/* USER CODE END TIM2_Init 2 */
		564
		565	}
		566
		567	/**
52	mjames	568	* @brief TIM3 Initialization Function
		569	* @param None
		570	* @retval None
		571	*/
		572	static void
		573	MX_TIM3_Init (void)
44	mjames	574	{
		575
50	mjames	576	/* USER CODE BEGIN TIM3_Init 0 */
44	mjames	577
50	mjames	578	/* USER CODE END TIM3_Init 0 */
		579
52	mjames	580	TIM_Encoder_InitTypeDef sConfig =
		581	{ 0 };
		582	TIM_MasterConfigTypeDef sMasterConfig =
		583	{ 0 };
50	mjames	584
		585	/* USER CODE BEGIN TIM3_Init 1 */
		586
		587	/* USER CODE END TIM3_Init 1 */
44	mjames	588	htim3.Instance = TIM3;
		589	htim3.Init.Prescaler = 0;
		590	htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
50	mjames	591	htim3.Init.Period = 65535;
		592	htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
		593	htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
44	mjames	594	sConfig.EncoderMode = TIM_ENCODERMODE_TI1;
50	mjames	595	sConfig.IC1Polarity = TIM_ICPOLARITY_RISING;
44	mjames	596	sConfig.IC1Selection = TIM_ICSELECTION_DIRECTTI;
		597	sConfig.IC1Prescaler = TIM_ICPSC_DIV1;
		598	sConfig.IC1Filter = 15;
50	mjames	599	sConfig.IC2Polarity = TIM_ICPOLARITY_RISING;
44	mjames	600	sConfig.IC2Selection = TIM_ICSELECTION_DIRECTTI;
		601	sConfig.IC2Prescaler = TIM_ICPSC_DIV1;
		602	sConfig.IC2Filter = 15;
52	mjames	603	if (HAL_TIM_Encoder_Init (&htim3, &sConfig) != HAL_OK)
		604	{
		605	Error_Handler ();
		606	}
44	mjames	607	sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
		608	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
52	mjames	609	if (HAL_TIMEx_MasterConfigSynchronization (&htim3, &sMasterConfig) != HAL_OK)
		610	{
		611	Error_Handler ();
		612	}
50	mjames	613	/* USER CODE BEGIN TIM3_Init 2 */
44	mjames	614
50	mjames	615	/* USER CODE END TIM3_Init 2 */
		616
44	mjames	617	}
		618
50	mjames	619	/**
52	mjames	620	* @brief TIM9 Initialization Function
		621	* @param None
		622	* @retval None
		623	*/
		624	static void
		625	MX_TIM9_Init (void)
44	mjames	626	{
		627
50	mjames	628	/* USER CODE BEGIN TIM9_Init 0 */
44	mjames	629
50	mjames	630	/* USER CODE END TIM9_Init 0 */
		631
52	mjames	632	TIM_Encoder_InitTypeDef sConfig =
		633	{ 0 };
		634	TIM_MasterConfigTypeDef sMasterConfig =
		635	{ 0 };
50	mjames	636
		637	/* USER CODE BEGIN TIM9_Init 1 */
		638
		639	/* USER CODE END TIM9_Init 1 */
44	mjames	640	htim9.Instance = TIM9;
		641	htim9.Init.Prescaler = 0;
		642	htim9.Init.CounterMode = TIM_COUNTERMODE_UP;
50	mjames	643	htim9.Init.Period = 65535;
		644	htim9.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
		645	htim9.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
44	mjames	646	sConfig.EncoderMode = TIM_ENCODERMODE_TI1;
50	mjames	647	sConfig.IC1Polarity = TIM_ICPOLARITY_RISING;
44	mjames	648	sConfig.IC1Selection = TIM_ICSELECTION_DIRECTTI;
		649	sConfig.IC1Prescaler = TIM_ICPSC_DIV1;
		650	sConfig.IC1Filter = 15;
50	mjames	651	sConfig.IC2Polarity = TIM_ICPOLARITY_RISING;
44	mjames	652	sConfig.IC2Selection = TIM_ICSELECTION_DIRECTTI;
		653	sConfig.IC2Prescaler = TIM_ICPSC_DIV1;
50	mjames	654	sConfig.IC2Filter = 0;
52	mjames	655	if (HAL_TIM_Encoder_Init (&htim9, &sConfig) != HAL_OK)
		656	{
		657	Error_Handler ();
		658	}
44	mjames	659	sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
		660	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
52	mjames	661	if (HAL_TIMEx_MasterConfigSynchronization (&htim9, &sMasterConfig) != HAL_OK)
		662	{
		663	Error_Handler ();
		664	}
50	mjames	665	/* USER CODE BEGIN TIM9_Init 2 */
44	mjames	666
50	mjames	667	/* USER CODE END TIM9_Init 2 */
		668
44	mjames	669	}
		670
50	mjames	671	/**
52	mjames	672	* @brief USART1 Initialization Function
		673	* @param None
		674	* @retval None
		675	*/
		676	static void
		677	MX_USART1_UART_Init (void)
5	mjames	678	{
3	mjames	679
50	mjames	680	/* USER CODE BEGIN USART1_Init 0 */
		681
		682	/* USER CODE END USART1_Init 0 */
		683
		684	/* USER CODE BEGIN USART1_Init 1 */
		685
		686	/* USER CODE END USART1_Init 1 */
16	mjames	687	huart1.Instance = USART1;
		688	huart1.Init.BaudRate = 19200;
		689	huart1.Init.WordLength = UART_WORDLENGTH_8B;
44	mjames	690	huart1.Init.StopBits = UART_STOPBITS_1;
16	mjames	691	huart1.Init.Parity = UART_PARITY_NONE;
		692	huart1.Init.Mode = UART_MODE_TX_RX;
		693	huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
		694	huart1.Init.OverSampling = UART_OVERSAMPLING_16;
52	mjames	695	if (HAL_UART_Init (&huart1) != HAL_OK)
		696	{
		697	Error_Handler ();
		698	}
50	mjames	699	/* USER CODE BEGIN USART1_Init 2 */
3	mjames	700
50	mjames	701	/* USER CODE END USART1_Init 2 */
		702
3	mjames	703	}
		704
50	mjames	705	/**
52	mjames	706	* @brief USART2 Initialization Function
		707	* @param None
		708	* @retval None
		709	*/
		710	static void
		711	MX_USART2_UART_Init (void)
5	mjames	712	{
2	mjames	713
50	mjames	714	/* USER CODE BEGIN USART2_Init 0 */
		715
		716	/* USER CODE END USART2_Init 0 */
		717
		718	/* USER CODE BEGIN USART2_Init 1 */
		719
		720	/* USER CODE END USART2_Init 1 */
16	mjames	721	huart2.Instance = USART2;
		722	huart2.Init.BaudRate = 115200;
		723	huart2.Init.WordLength = UART_WORDLENGTH_8B;
		724	huart2.Init.StopBits = UART_STOPBITS_1;
		725	huart2.Init.Parity = UART_PARITY_NONE;
		726	huart2.Init.Mode = UART_MODE_TX_RX;
		727	huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
		728	huart2.Init.OverSampling = UART_OVERSAMPLING_16;
52	mjames	729	if (HAL_UART_Init (&huart2) != HAL_OK)
		730	{
		731	Error_Handler ();
		732	}
50	mjames	733	/* USER CODE BEGIN USART2_Init 2 */
2	mjames	734
50	mjames	735	/* USER CODE END USART2_Init 2 */
		736
2	mjames	737	}
		738
50	mjames	739	/**
52	mjames	740	* @brief USART3 Initialization Function
		741	* @param None
		742	* @retval None
		743	*/
		744	static void
		745	MX_USART3_UART_Init (void)
23	mjames	746	{
		747
50	mjames	748	/* USER CODE BEGIN USART3_Init 0 */
		749
		750	/* USER CODE END USART3_Init 0 */
		751
		752	/* USER CODE BEGIN USART3_Init 1 */
		753
		754	/* USER CODE END USART3_Init 1 */
23	mjames	755	huart3.Instance = USART3;
52	mjames	756	huart3.Init.BaudRate = 9600;
23	mjames	757	huart3.Init.WordLength = UART_WORDLENGTH_8B;
50	mjames	758	huart3.Init.StopBits = UART_STOPBITS_1;
44	mjames	759	huart3.Init.Parity = UART_PARITY_NONE;
23	mjames	760	huart3.Init.Mode = UART_MODE_TX_RX;
		761	huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
		762	huart3.Init.OverSampling = UART_OVERSAMPLING_16;
52	mjames	763	if (HAL_UART_Init (&huart3) != HAL_OK)
		764	{
		765	Error_Handler ();
		766	}
50	mjames	767	/* USER CODE BEGIN USART3_Init 2 */
23	mjames	768
50	mjames	769	/* USER CODE END USART3_Init 2 */
		770
23	mjames	771	}
		772
50	mjames	773	/**
52	mjames	774	* @brief GPIO Initialization Function
		775	* @param None
		776	* @retval None
		777	*/
		778	static void
		779	MX_GPIO_Init (void)
5	mjames	780	{
52	mjames	781	GPIO_InitTypeDef GPIO_InitStruct =
		782	{ 0 };
2	mjames	783
16	mjames	784	/* GPIO Ports Clock Enable */
29	mjames	785	__HAL_RCC_GPIOH_CLK_ENABLE();
		786	__HAL_RCC_GPIOA_CLK_ENABLE();
		787	__HAL_RCC_GPIOC_CLK_ENABLE();
		788	__HAL_RCC_GPIOB_CLK_ENABLE();
2	mjames	789
16	mjames	790	/Configure GPIO pin Output Level /
52	mjames	791	HAL_GPIO_WritePin (SPI_NSS1_GPIO_Port, SPI_NSS1_Pin, GPIO_PIN_SET);
2	mjames	792
16	mjames	793	/Configure GPIO pin Output Level /
52	mjames	794	HAL_GPIO_WritePin (GPIOA, SPI_CD_Pin \| BT_BUTTON_Pin, GPIO_PIN_RESET);
2	mjames	795
50	mjames	796	/Configure GPIO pin Output Level /
52	mjames	797	HAL_GPIO_WritePin (GPIOC, SPI_RESET_Pin \| POWER_LATCH_Pin \| USB_PWR_Pin,
		798	GPIO_PIN_RESET);
50	mjames	799
		800	/Configure GPIO pin Output Level /
52	mjames	801	HAL_GPIO_WritePin (SPI_NSS2_GPIO_Port, SPI_NSS2_Pin, GPIO_PIN_SET);
50	mjames	802
		803	/Configure GPIO pins : SPI_NSS1_Pin SPI_CD_Pin /
52	mjames	804	GPIO_InitStruct.Pin = SPI_NSS1_Pin \| SPI_CD_Pin;
16	mjames	805	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
29	mjames	806	GPIO_InitStruct.Pull = GPIO_NOPULL;
16	mjames	807	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
52	mjames	808	HAL_GPIO_Init (GPIOA, &GPIO_InitStruct);
2	mjames	809
24	mjames	810	/Configure GPIO pins : SPI_RESET_Pin SPI_NSS2_Pin POWER_LATCH_Pin USB_PWR_Pin /
52	mjames	811	GPIO_InitStruct.Pin = SPI_RESET_Pin \| SPI_NSS2_Pin \| POWER_LATCH_Pin
		812	\| USB_PWR_Pin;
16	mjames	813	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
29	mjames	814	GPIO_InitStruct.Pull = GPIO_NOPULL;
16	mjames	815	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
52	mjames	816	HAL_GPIO_Init (GPIOC, &GPIO_InitStruct);
2	mjames	817
44	mjames	818	/Configure GPIO pins : SW1_PUSH_Pin SW2_PUSH_Pin /
52	mjames	819	GPIO_InitStruct.Pin = SW1_PUSH_Pin \| SW2_PUSH_Pin;
16	mjames	820	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
32	mjames	821	GPIO_InitStruct.Pull = GPIO_PULLUP;
52	mjames	822	HAL_GPIO_Init (GPIOB, &GPIO_InitStruct);
5	mjames	823
32	mjames	824	/Configure GPIO pin : IGNITION_Pin /
		825	GPIO_InitStruct.Pin = IGNITION_Pin;
		826	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
		827	GPIO_InitStruct.Pull = GPIO_NOPULL;
52	mjames	828	HAL_GPIO_Init (IGNITION_GPIO_Port, &GPIO_InitStruct);
32	mjames	829
37	mjames	830	/Configure GPIO pin : BT_BUTTON_Pin /
		831	GPIO_InitStruct.Pin = BT_BUTTON_Pin;
		832	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
		833	GPIO_InitStruct.Pull = GPIO_NOPULL;
		834	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
52	mjames	835	HAL_GPIO_Init (BT_BUTTON_GPIO_Port, &GPIO_InitStruct);
37	mjames	836
2	mjames	837	}
		838
		839	/* USER CODE BEGIN 4 */
		840
		841	/* USER CODE END 4 */
		842
5	mjames	843	/**
52	mjames	844	* @brief This function is executed in case of error occurrence.
		845	* @retval None
		846	*/
		847	void
		848	Error_Handler (void)
5	mjames	849	{
50	mjames	850	/* USER CODE BEGIN Error_Handler_Debug */
		851	/* User can add his own implementation to report the HAL error return state */
		852
		853	/* USER CODE END Error_Handler_Debug */
30	mjames	854	}
5	mjames	855
50	mjames	856	#ifdef USE_FULL_ASSERT
2	mjames	857	/**
50	mjames	858	* @brief Reports the name of the source file and the source line number
		859	* where the assert_param error has occurred.
		860	* @param file: pointer to the source file name
		861	* @param line: assert_param error line source number
		862	* @retval None
		863	*/
		864	void assert_failed(uint8_t *file, uint32_t line)
29	mjames	865	{
		866	/* USER CODE BEGIN 6 */
50	mjames	867	/* User can add his own implementation to report the file name and line number,
		868	tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
29	mjames	869	/* USER CODE END 6 */
		870	}
50	mjames	871	#endif /* USE_FULL_ASSERT */
2	mjames	872
		873	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Subversion Repositories DashDisplay

(root)/branches/Dashboard_L152_210623/Src/main.c – Rev 57