WebSVN – DashDisplay – Blame – /branches/Dashboard_L152_210623/Src/main.c

Rev	Author	Line No.	Line
50	mjames	1	/* USER CODE BEGIN Header */
2	mjames	2	/**
29	mjames	3	******************************************************************************
50	mjames	4	* @file : main.c
		5	* @brief : Main program body
29	mjames	6	******************************************************************************
50	mjames	7	* @attention
29	mjames	8	*
50	mjames	9	* <h2><center>© Copyright (c) 2020 STMicroelectronics.
		10	* All rights reserved.</center></h2>
29	mjames	11	*
50	mjames	12	* This software component is licensed by ST under BSD 3-Clause license,
		13	* the "License"; You may not use this file except in compliance with the
		14	* License. You may obtain a copy of the License at:
		15	* opensource.org/licenses/BSD-3-Clause
29	mjames	16	*
		17	******************************************************************************
		18	*/
50	mjames	19	/* USER CODE END Header */
2	mjames	20	/* Includes ------------------------------------------------------------------*/
50	mjames	21	#include "main.h"
2	mjames	22
50	mjames	23	/* Private includes ----------------------------------------------------------*/
2	mjames	24	/* USER CODE BEGIN Includes */
50	mjames	25
		26
		27	#include "libPLX/plx.h"
		28	#include "libSerial/serial.H"
		29	#include "libSmallPrintf/small_printf.h"
4	mjames	30	#include "switches.h"
2	mjames	31
		32	/* USER CODE END Includes */
		33
50	mjames	34	/* Private typedef -----------------------------------------------------------*/
		35	/* USER CODE BEGIN PTD */
		36
		37	/* USER CODE END PTD */
		38
		39	/* Private define ------------------------------------------------------------*/
		40	/* USER CODE BEGIN PD */
		41	/* USER CODE END PD */
		42
		43	/* Private macro -------------------------------------------------------------*/
		44	/* USER CODE BEGIN PM */
		45
		46	/* USER CODE END PM */
		47
2	mjames	48	/* Private variables ---------------------------------------------------------*/
		49	SPI_HandleTypeDef hspi1;
		50
50	mjames	51	TIM_HandleTypeDef htim2;
44	mjames	52	TIM_HandleTypeDef htim3;
		53	TIM_HandleTypeDef htim9;
		54
3	mjames	55	UART_HandleTypeDef huart1;
2	mjames	56	UART_HandleTypeDef huart2;
23	mjames	57	UART_HandleTypeDef huart3;
2	mjames	58
		59	/* USER CODE BEGIN PV */
		60	/* Private variables ---------------------------------------------------------*/
		61
50	mjames	62	context_t contexts[MAX_DISPLAYS];
		63
24	mjames	64	/* timeout when the ignition is switched off */
		65	#define IGNITION_OFF_TIMEOUT 30000UL
		66
14	mjames	67
18	mjames	68
50	mjames	69	const int DialTimeout = 50; // about 20 seconds after twiddle, save the dial position.
18	mjames	70
50	mjames	71	uint16_t dial_nvram[MAX_DISPLAYS] __attribute__((section(".NVRAM_Data")));
14	mjames	72
50	mjames	73
		74
		75	data_t Data;
7	mjames	76	int Max[MAXRDG];
		77	int Min[MAXRDG];
		78	int PLXItems;
24	mjames	79
27	mjames	80	uint32_t Latch_Timer = IGNITION_OFF_TIMEOUT;
24	mjames	81
2	mjames	82	/* USER CODE END PV */
		83
		84	/* Private function prototypes -----------------------------------------------*/
29	mjames	85	void SystemClock_Config(void);
		86	static void MX_GPIO_Init(void);
		87	static void MX_SPI1_Init(void);
		88	static void MX_USART1_UART_Init(void);
		89	static void MX_USART2_UART_Init(void);
		90	static void MX_USART3_UART_Init(void);
44	mjames	91	static void MX_TIM3_Init(void);
		92	static void MX_TIM9_Init(void);
50	mjames	93	static void MX_TIM2_Init(void);
2	mjames	94	/* USER CODE BEGIN PFP */
		95
7	mjames	96	// the dial is the switch number we are using.
		97	// suppress is the ItemIndex we wish to suppress on this display
30	mjames	98	int DisplayCurrent(int dial, int suppress)
7	mjames	99	{
50	mjames	100	if (PLXItems == 0)
		101	return -1;
14	mjames	102
50	mjames	103	int itemIndex = dial_pos[dial] % PLXItems;
2	mjames	104
27	mjames	105
50	mjames	106	return cc_display(dial, itemIndex, suppress);
		107	}
30	mjames	108
9	mjames	109
		110
14	mjames	111
50	mjames	112	/* USER CODE END PFP */
14	mjames	113
50	mjames	114	/* Private user code ---------------------------------------------------------*/
		115	/* USER CODE BEGIN 0 */
14	mjames	116
7	mjames	117	/* USER CODE END 0 */
2	mjames	118
50	mjames	119	/**
		120	* @brief The application entry point.
		121	* @retval int
		122	*/
29	mjames	123	int main(void)
7	mjames	124	{
16	mjames	125	/* USER CODE BEGIN 1 */
50	mjames	126	__HAL_RCC_SPI1_CLK_ENABLE()
		127	;
		128	__HAL_RCC_USART1_CLK_ENABLE()
		129	; // PLX main port
		130	__HAL_RCC_USART2_CLK_ENABLE()
		131	; // debug port
		132	__HAL_RCC_USART3_CLK_ENABLE ()
		133	; // Bluetooth port
2	mjames	134
50	mjames	135	__HAL_RCC_TIM3_CLK_ENABLE();
2	mjames	136
50	mjames	137	__HAL_RCC_TIM9_CLK_ENABLE();
23	mjames	138
16	mjames	139	/* USER CODE END 1 */
2	mjames	140
50	mjames	141	/* MCU Configuration--------------------------------------------------------*/
6	mjames	142
16	mjames	143	/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
29	mjames	144	HAL_Init();
2	mjames	145
50	mjames	146	/* USER CODE BEGIN Init */
		147
		148	/* USER CODE END Init */
		149
16	mjames	150	/* Configure the system clock */
29	mjames	151	SystemClock_Config();
2	mjames	152
50	mjames	153	/* USER CODE BEGIN SysInit */
		154
		155	/* USER CODE END SysInit */
		156
16	mjames	157	/* Initialize all configured peripherals */
29	mjames	158	MX_GPIO_Init();
		159	MX_SPI1_Init();
		160	MX_USART1_UART_Init();
		161	MX_USART2_UART_Init();
		162	MX_USART3_UART_Init();
44	mjames	163	MX_TIM3_Init();
		164	MX_TIM9_Init();
50	mjames	165	MX_TIM2_Init();
16	mjames	166	/* USER CODE BEGIN 2 */
2	mjames	167
50	mjames	168	/* Turn on USART1 IRQ */
		169	HAL_NVIC_SetPriority(USART1_IRQn, 2, 0);
		170	HAL_NVIC_EnableIRQ(USART1_IRQn);
4	mjames	171
50	mjames	172	/* Turn on USART2 IRQ */
		173	HAL_NVIC_SetPriority(USART2_IRQn, 4, 0);
		174	HAL_NVIC_EnableIRQ(USART2_IRQn);
2	mjames	175
50	mjames	176	/* turn on USART3 IRQ */
		177	HAL_NVIC_SetPriority(USART3_IRQn, 4, 0);
		178	HAL_NVIC_EnableIRQ(USART3_IRQn);
4	mjames	179
50	mjames	180	/* setup the USART control blocks */
		181	init_usart_ctl(&uc1, huart1.Instance);
		182	init_usart_ctl(&uc2, huart2.Instance);
		183	init_usart_ctl(&uc3, huart3.Instance);
23	mjames	184
50	mjames	185	EnableSerialRxInterrupt(&uc1);
		186	EnableSerialRxInterrupt(&uc2);
		187	EnableSerialRxInterrupt(&uc3);
23	mjames	188
50	mjames	189	HAL_TIM_Encoder_Start(&htim3, TIM_CHANNEL_ALL);
23	mjames	190
50	mjames	191	HAL_TIM_Encoder_Start(&htim9, TIM_CHANNEL_ALL);
44	mjames	192
23	mjames	193
50	mjames	194	// Switch handler called on sysTick interrupt.
		195	InitSwitches();
2	mjames	196
50	mjames	197	cc_init();
23	mjames	198
50	mjames	199	int i;
		200	for (i = 0; i < 2; i++)
		201	{
		202	dial_pos[i] = dial_nvram[i];
		203	}
7	mjames	204
50	mjames	205	/* reset the display timeout, latch on power from accessories */
		206	Latch_Timer = IGNITION_OFF_TIMEOUT;
		207	HAL_GPIO_WritePin(POWER_LATCH_GPIO_Port, POWER_LATCH_Pin, GPIO_PIN_RESET);
16	mjames	208
		209	/* USER CODE END 2 */
7	mjames	210
16	mjames	211	/* Infinite loop */
		212	/* USER CODE BEGIN WHILE */
50	mjames	213	while(1){
7	mjames	214
50	mjames	215	/* while ignition is on, keep resetting power latch timer */
		216	if (HAL_GPIO_ReadPin(IGNITION_GPIO_Port, IGNITION_Pin) == GPIO_PIN_RESET)
		217	{
		218	Latch_Timer = HAL_GetTick() + IGNITION_OFF_TIMEOUT;
		219	}
		220	else
		221	{
		222	/* if the ignition has been off for a while, then turn off power */
		223	if (HAL_GetTick() > Latch_Timer)
		224	{
		225	HAL_GPIO_WritePin(POWER_LATCH_GPIO_Port, POWER_LATCH_Pin,
		226	GPIO_PIN_RESET);
		227	}
		228	}
27	mjames	229
50	mjames	230	uint32_t timeout = 0; //
		231	// PLX decoder protocols
		232	char PLXPacket = 0;
		233	for (i = 0; i < MAXRDG; i++)
		234	{
		235	Max[i] = 0;
		236	Min[i] = 0xFFF; // 12 bit max value
		237	}
27	mjames	238
50	mjames	239	int PLXPtr = 0;
27	mjames	240
50	mjames	241	while (1)
		242	{
		243	// Handle the bluetooth pairing function by pressing both buttons.
		244	if ((push_pos[0] == 1) && (push_pos[1] == 1))
		245	{
		246	HAL_GPIO_WritePin(BT_BUTTON_GPIO_Port, BT_BUTTON_Pin, GPIO_PIN_SET);
		247	}
		248	else
		249	{
		250	HAL_GPIO_WritePin(BT_BUTTON_GPIO_Port, BT_BUTTON_Pin, GPIO_PIN_RESET);
		251	}
24	mjames	252
50	mjames	253	uint16_t cc = SerialCharsReceived(&uc1);
		254	int chr;
		255	if (cc == 0)
		256	{
		257	timeout++;
		258	if (timeout % 1000 == 0)
		259	{
		260	const char msg[] = "Timeout\r\n";
		261	char * p = msg;
		262	while(*p)
		263	{
		264	PutCharSerial(&uc3,*p++);
		265	}
7	mjames	266
50	mjames	267	}
38	mjames	268
50	mjames	269	if (timeout > 60000)
		270	{
38	mjames	271
50	mjames	272	// do turn off screen
		273	}
7	mjames	274
50	mjames	275	}
		276	for (chr = 0; chr < cc; chr++)
		277	{
		278	char c = GetCharSerial(&uc1);
27	mjames	279
7	mjames	280
50	mjames	281	if (c == PLX_Start) // at any time if the start byte appears, reset the pointers
		282	{
		283	PLXPtr = 0; // reset the pointer
		284	PLXPacket = 1;
		285	timeout = 0; // Reset the timer
		286	}
		287	else if (c == PLX_Stop)
		288	{
		289	if (PLXPacket)
		290	{
		291	// we can now decode the selected parameter
		292	PLXItems = PLXPtr / sizeof(PLX_SensorInfo); // total
		293	// saturate the rotary switch position
9	mjames	294
50	mjames	295	int DataVal;
		296	// process min/max
		297	for (i = 0; i < PLXItems; i++)
		298	{
		299	// Send item to BT
		300	uint16_t addr = ConvPLX(Data.Sensor[i].AddrH,
		301	Data.Sensor[i].AddrL);
		302	uint8_t inst = Data.Sensor[i].Instance;
		303	uint16_t reading = ConvPLX(Data.Sensor[i].ReadingH,
		304	Data.Sensor[i].ReadingL);
23	mjames	305
50	mjames	306	char outbuff[100];
		307	small_sprintf(outbuff, "%d,%d,%d\n\r", addr, inst,
		308	reading);
		309	int ck=0;
		310	while(outbuff[ck] && ck < 100)
30	mjames	311
50	mjames	312	{
		313	PutCharSerial(&uc2, outbuff[ck++]);
		314	}
		315	DataVal = ConvPLX(Data.Sensor[i].ReadingH,
		316	Data.Sensor[i].ReadingL);
		317	if (DataVal > Max[i])
		318	{
		319	Max[i] = DataVal;
		320	}
		321	if (DataVal < Min[i])
		322	{
		323	Min[i] = DataVal;
		324	}
		325	}
4	mjames	326
50	mjames	327	// now to display the information
		328	int suppress = DisplayCurrent(0, -1);
		329	DisplayCurrent(1, suppress);
		330	}
		331	PLXPtr = 0;
		332	PLXPacket = 0;
		333	}
		334	else if (c > PLX_Stop) // illegal char, restart reading
		335	{
		336	PLXPacket = 0;
		337	PLXPtr = 0;
		338	}
		339	else if (PLXPacket && PLXPtr < sizeof(Data.Bytes))
		340	{
		341	Data.Bytes[PLXPtr++] = c;
		342	}
2	mjames	343
50	mjames	344	}
6	mjames	345
50	mjames	346	HAL_Delay(1);
		347	}
		348
		349	/* USER CODE END WHILE */
		350
		351	/* USER CODE BEGIN 3 */
		352	}
16	mjames	353	/* USER CODE END 3 */
2	mjames	354	}
		355
50	mjames	356	/**
		357	* @brief System Clock Configuration
		358	* @retval None
		359	*/
29	mjames	360	void SystemClock_Config(void)
5	mjames	361	{
50	mjames	362	RCC_OscInitTypeDef RCC_OscInitStruct = {0};
		363	RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
2	mjames	364
50	mjames	365	/** Configure the main internal regulator output voltage
		366	*/
29	mjames	367	__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
50	mjames	368	/** Initializes the RCC Oscillators according to the specified parameters
		369	* in the RCC_OscInitTypeDef structure.
		370	*/
44	mjames	371	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
		372	RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
16	mjames	373	RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
44	mjames	374	RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
		375	RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12;
29	mjames	376	RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3;
		377	if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
		378	{
		379	Error_Handler();
		380	}
50	mjames	381	/** Initializes the CPU, AHB and APB buses clocks
		382	*/
29	mjames	383	RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK\|RCC_CLOCKTYPE_SYSCLK
		384	\|RCC_CLOCKTYPE_PCLK1\|RCC_CLOCKTYPE_PCLK2;
16	mjames	385	RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
		386	RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
29	mjames	387	RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
16	mjames	388	RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
50	mjames	389
29	mjames	390	if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
		391	{
		392	Error_Handler();
		393	}
2	mjames	394	}
		395
50	mjames	396	/**
		397	* @brief SPI1 Initialization Function
		398	* @param None
		399	* @retval None
		400	*/
29	mjames	401	static void MX_SPI1_Init(void)
5	mjames	402	{
2	mjames	403
50	mjames	404	/* USER CODE BEGIN SPI1_Init 0 */
		405
		406	/* USER CODE END SPI1_Init 0 */
		407
		408	/* USER CODE BEGIN SPI1_Init 1 */
		409
		410	/* USER CODE END SPI1_Init 1 */
		411	/* SPI1 parameter configuration*/
16	mjames	412	hspi1.Instance = SPI1;
		413	hspi1.Init.Mode = SPI_MODE_MASTER;
		414	hspi1.Init.Direction = SPI_DIRECTION_1LINE;
		415	hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
		416	hspi1.Init.CLKPolarity = SPI_POLARITY_HIGH;
		417	hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
		418	hspi1.Init.NSS = SPI_NSS_SOFT;
50	mjames	419	hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
16	mjames	420	hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
		421	hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
		422	hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
		423	hspi1.Init.CRCPolynomial = 10;
29	mjames	424	if (HAL_SPI_Init(&hspi1) != HAL_OK)
		425	{
		426	Error_Handler();
		427	}
50	mjames	428	/* USER CODE BEGIN SPI1_Init 2 */
2	mjames	429
50	mjames	430	/* USER CODE END SPI1_Init 2 */
		431
2	mjames	432	}
		433
50	mjames	434	/**
		435	* @brief TIM2 Initialization Function
		436	* @param None
		437	* @retval None
		438	*/
		439	static void MX_TIM2_Init(void)
		440	{
		441
		442	/* USER CODE BEGIN TIM2_Init 0 */
		443
		444	/* USER CODE END TIM2_Init 0 */
		445
		446	TIM_ClockConfigTypeDef sClockSourceConfig = {0};
		447	TIM_MasterConfigTypeDef sMasterConfig = {0};
		448
		449	/* USER CODE BEGIN TIM2_Init 1 */
		450
		451	/* USER CODE END TIM2_Init 1 */
		452	htim2.Instance = TIM2;
		453	htim2.Init.Prescaler = 0;
		454	htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
		455	htim2.Init.Period = 65535;
		456	htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
		457	htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
		458	if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
		459	{
		460	Error_Handler();
		461	}
		462	sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
		463	if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
		464	{
		465	Error_Handler();
		466	}
		467	sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
		468	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
		469	if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
		470	{
		471	Error_Handler();
		472	}
		473	/* USER CODE BEGIN TIM2_Init 2 */
		474
		475	/* USER CODE END TIM2_Init 2 */
		476
		477	}
		478
		479	/**
		480	* @brief TIM3 Initialization Function
		481	* @param None
		482	* @retval None
		483	*/
44	mjames	484	static void MX_TIM3_Init(void)
		485	{
		486
50	mjames	487	/* USER CODE BEGIN TIM3_Init 0 */
44	mjames	488
50	mjames	489	/* USER CODE END TIM3_Init 0 */
		490
		491	TIM_Encoder_InitTypeDef sConfig = {0};
		492	TIM_MasterConfigTypeDef sMasterConfig = {0};
		493
		494	/* USER CODE BEGIN TIM3_Init 1 */
		495
		496	/* USER CODE END TIM3_Init 1 */
44	mjames	497	htim3.Instance = TIM3;
		498	htim3.Init.Prescaler = 0;
		499	htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
50	mjames	500	htim3.Init.Period = 65535;
		501	htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
		502	htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
44	mjames	503	sConfig.EncoderMode = TIM_ENCODERMODE_TI1;
50	mjames	504	sConfig.IC1Polarity = TIM_ICPOLARITY_RISING;
44	mjames	505	sConfig.IC1Selection = TIM_ICSELECTION_DIRECTTI;
		506	sConfig.IC1Prescaler = TIM_ICPSC_DIV1;
		507	sConfig.IC1Filter = 15;
50	mjames	508	sConfig.IC2Polarity = TIM_ICPOLARITY_RISING;
44	mjames	509	sConfig.IC2Selection = TIM_ICSELECTION_DIRECTTI;
		510	sConfig.IC2Prescaler = TIM_ICPSC_DIV1;
		511	sConfig.IC2Filter = 15;
		512	if (HAL_TIM_Encoder_Init(&htim3, &sConfig) != HAL_OK)
		513	{
		514	Error_Handler();
		515	}
		516	sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
		517	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
		518	if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
		519	{
		520	Error_Handler();
		521	}
50	mjames	522	/* USER CODE BEGIN TIM3_Init 2 */
44	mjames	523
50	mjames	524	/* USER CODE END TIM3_Init 2 */
		525
44	mjames	526	}
		527
50	mjames	528	/**
		529	* @brief TIM9 Initialization Function
		530	* @param None
		531	* @retval None
		532	*/
44	mjames	533	static void MX_TIM9_Init(void)
		534	{
		535
50	mjames	536	/* USER CODE BEGIN TIM9_Init 0 */
44	mjames	537
50	mjames	538	/* USER CODE END TIM9_Init 0 */
		539
		540	TIM_Encoder_InitTypeDef sConfig = {0};
		541	TIM_MasterConfigTypeDef sMasterConfig = {0};
		542
		543	/* USER CODE BEGIN TIM9_Init 1 */
		544
		545	/* USER CODE END TIM9_Init 1 */
44	mjames	546	htim9.Instance = TIM9;
		547	htim9.Init.Prescaler = 0;
		548	htim9.Init.CounterMode = TIM_COUNTERMODE_UP;
50	mjames	549	htim9.Init.Period = 65535;
		550	htim9.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
		551	htim9.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
44	mjames	552	sConfig.EncoderMode = TIM_ENCODERMODE_TI1;
50	mjames	553	sConfig.IC1Polarity = TIM_ICPOLARITY_RISING;
44	mjames	554	sConfig.IC1Selection = TIM_ICSELECTION_DIRECTTI;
		555	sConfig.IC1Prescaler = TIM_ICPSC_DIV1;
		556	sConfig.IC1Filter = 15;
50	mjames	557	sConfig.IC2Polarity = TIM_ICPOLARITY_RISING;
44	mjames	558	sConfig.IC2Selection = TIM_ICSELECTION_DIRECTTI;
		559	sConfig.IC2Prescaler = TIM_ICPSC_DIV1;
50	mjames	560	sConfig.IC2Filter = 0;
44	mjames	561	if (HAL_TIM_Encoder_Init(&htim9, &sConfig) != HAL_OK)
		562	{
		563	Error_Handler();
		564	}
		565	sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
		566	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
		567	if (HAL_TIMEx_MasterConfigSynchronization(&htim9, &sMasterConfig) != HAL_OK)
		568	{
		569	Error_Handler();
		570	}
50	mjames	571	/* USER CODE BEGIN TIM9_Init 2 */
44	mjames	572
50	mjames	573	/* USER CODE END TIM9_Init 2 */
		574
44	mjames	575	}
		576
50	mjames	577	/**
		578	* @brief USART1 Initialization Function
		579	* @param None
		580	* @retval None
		581	*/
29	mjames	582	static void MX_USART1_UART_Init(void)
5	mjames	583	{
3	mjames	584
50	mjames	585	/* USER CODE BEGIN USART1_Init 0 */
		586
		587	/* USER CODE END USART1_Init 0 */
		588
		589	/* USER CODE BEGIN USART1_Init 1 */
		590
		591	/* USER CODE END USART1_Init 1 */
16	mjames	592	huart1.Instance = USART1;
		593	huart1.Init.BaudRate = 19200;
		594	huart1.Init.WordLength = UART_WORDLENGTH_8B;
44	mjames	595	huart1.Init.StopBits = UART_STOPBITS_1;
16	mjames	596	huart1.Init.Parity = UART_PARITY_NONE;
		597	huart1.Init.Mode = UART_MODE_TX_RX;
		598	huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
		599	huart1.Init.OverSampling = UART_OVERSAMPLING_16;
29	mjames	600	if (HAL_UART_Init(&huart1) != HAL_OK)
		601	{
		602	Error_Handler();
		603	}
50	mjames	604	/* USER CODE BEGIN USART1_Init 2 */
3	mjames	605
50	mjames	606	/* USER CODE END USART1_Init 2 */
		607
3	mjames	608	}
		609
50	mjames	610	/**
		611	* @brief USART2 Initialization Function
		612	* @param None
		613	* @retval None
		614	*/
29	mjames	615	static void MX_USART2_UART_Init(void)
5	mjames	616	{
2	mjames	617
50	mjames	618	/* USER CODE BEGIN USART2_Init 0 */
		619
		620	/* USER CODE END USART2_Init 0 */
		621
		622	/* USER CODE BEGIN USART2_Init 1 */
		623
		624	/* USER CODE END USART2_Init 1 */
16	mjames	625	huart2.Instance = USART2;
		626	huart2.Init.BaudRate = 115200;
		627	huart2.Init.WordLength = UART_WORDLENGTH_8B;
		628	huart2.Init.StopBits = UART_STOPBITS_1;
		629	huart2.Init.Parity = UART_PARITY_NONE;
		630	huart2.Init.Mode = UART_MODE_TX_RX;
		631	huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
		632	huart2.Init.OverSampling = UART_OVERSAMPLING_16;
29	mjames	633	if (HAL_UART_Init(&huart2) != HAL_OK)
		634	{
		635	Error_Handler();
		636	}
50	mjames	637	/* USER CODE BEGIN USART2_Init 2 */
2	mjames	638
50	mjames	639	/* USER CODE END USART2_Init 2 */
		640
2	mjames	641	}
		642
50	mjames	643	/**
		644	* @brief USART3 Initialization Function
		645	* @param None
		646	* @retval None
		647	*/
29	mjames	648	static void MX_USART3_UART_Init(void)
23	mjames	649	{
		650
50	mjames	651	/* USER CODE BEGIN USART3_Init 0 */
		652
		653	/* USER CODE END USART3_Init 0 */
		654
		655	/* USER CODE BEGIN USART3_Init 1 */
		656
		657	/* USER CODE END USART3_Init 1 */
23	mjames	658	huart3.Instance = USART3;
		659	huart3.Init.BaudRate = 19200;
		660	huart3.Init.WordLength = UART_WORDLENGTH_8B;
50	mjames	661	huart3.Init.StopBits = UART_STOPBITS_1;
44	mjames	662	huart3.Init.Parity = UART_PARITY_NONE;
23	mjames	663	huart3.Init.Mode = UART_MODE_TX_RX;
		664	huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
		665	huart3.Init.OverSampling = UART_OVERSAMPLING_16;
29	mjames	666	if (HAL_UART_Init(&huart3) != HAL_OK)
		667	{
		668	Error_Handler();
		669	}
50	mjames	670	/* USER CODE BEGIN USART3_Init 2 */
23	mjames	671
50	mjames	672	/* USER CODE END USART3_Init 2 */
		673
23	mjames	674	}
		675
50	mjames	676	/**
		677	* @brief GPIO Initialization Function
		678	* @param None
		679	* @retval None
		680	*/
29	mjames	681	static void MX_GPIO_Init(void)
5	mjames	682	{
50	mjames	683	GPIO_InitTypeDef GPIO_InitStruct = {0};
2	mjames	684
16	mjames	685	/* GPIO Ports Clock Enable */
29	mjames	686	__HAL_RCC_GPIOH_CLK_ENABLE();
		687	__HAL_RCC_GPIOA_CLK_ENABLE();
		688	__HAL_RCC_GPIOC_CLK_ENABLE();
		689	__HAL_RCC_GPIOB_CLK_ENABLE();
2	mjames	690
16	mjames	691	/Configure GPIO pin Output Level /
50	mjames	692	HAL_GPIO_WritePin(SPI_NSS1_GPIO_Port, SPI_NSS1_Pin, GPIO_PIN_SET);
2	mjames	693
16	mjames	694	/Configure GPIO pin Output Level /
50	mjames	695	HAL_GPIO_WritePin(GPIOA, SPI_CD_Pin\|BT_BUTTON_Pin, GPIO_PIN_RESET);
2	mjames	696
50	mjames	697	/Configure GPIO pin Output Level /
		698	HAL_GPIO_WritePin(GPIOC, SPI_RESET_Pin\|POWER_LATCH_Pin\|USB_PWR_Pin, GPIO_PIN_RESET);
		699
		700	/Configure GPIO pin Output Level /
		701	HAL_GPIO_WritePin(SPI_NSS2_GPIO_Port, SPI_NSS2_Pin, GPIO_PIN_SET);
		702
		703	/Configure GPIO pins : SPI_NSS1_Pin SPI_CD_Pin /
		704	GPIO_InitStruct.Pin = SPI_NSS1_Pin\|SPI_CD_Pin;
16	mjames	705	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
29	mjames	706	GPIO_InitStruct.Pull = GPIO_NOPULL;
16	mjames	707	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
29	mjames	708	HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
2	mjames	709
24	mjames	710	/Configure GPIO pins : SPI_RESET_Pin SPI_NSS2_Pin POWER_LATCH_Pin USB_PWR_Pin /
29	mjames	711	GPIO_InitStruct.Pin = SPI_RESET_Pin\|SPI_NSS2_Pin\|POWER_LATCH_Pin\|USB_PWR_Pin;
16	mjames	712	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
29	mjames	713	GPIO_InitStruct.Pull = GPIO_NOPULL;
16	mjames	714	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
29	mjames	715	HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
2	mjames	716
44	mjames	717	/Configure GPIO pins : SW1_PUSH_Pin SW2_PUSH_Pin /
		718	GPIO_InitStruct.Pin = SW1_PUSH_Pin\|SW2_PUSH_Pin;
16	mjames	719	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
32	mjames	720	GPIO_InitStruct.Pull = GPIO_PULLUP;
29	mjames	721	HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
5	mjames	722
32	mjames	723	/Configure GPIO pin : IGNITION_Pin /
		724	GPIO_InitStruct.Pin = IGNITION_Pin;
		725	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
		726	GPIO_InitStruct.Pull = GPIO_NOPULL;
		727	HAL_GPIO_Init(IGNITION_GPIO_Port, &GPIO_InitStruct);
		728
37	mjames	729	/Configure GPIO pin : BT_BUTTON_Pin /
		730	GPIO_InitStruct.Pin = BT_BUTTON_Pin;
		731	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
		732	GPIO_InitStruct.Pull = GPIO_NOPULL;
		733	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
		734	HAL_GPIO_Init(BT_BUTTON_GPIO_Port, &GPIO_InitStruct);
		735
2	mjames	736	}
		737
		738	/* USER CODE BEGIN 4 */
		739
		740	/* USER CODE END 4 */
		741
5	mjames	742	/**
29	mjames	743	* @brief This function is executed in case of error occurrence.
		744	* @retval None
		745	*/
		746	void Error_Handler(void)
5	mjames	747	{
50	mjames	748	/* USER CODE BEGIN Error_Handler_Debug */
		749	/* User can add his own implementation to report the HAL error return state */
		750
		751	/* USER CODE END Error_Handler_Debug */
30	mjames	752	}
5	mjames	753
50	mjames	754	#ifdef USE_FULL_ASSERT
2	mjames	755	/**
50	mjames	756	* @brief Reports the name of the source file and the source line number
		757	* where the assert_param error has occurred.
		758	* @param file: pointer to the source file name
		759	* @param line: assert_param error line source number
		760	* @retval None
		761	*/
		762	void assert_failed(uint8_t *file, uint32_t line)
29	mjames	763	{
		764	/* USER CODE BEGIN 6 */
50	mjames	765	/* User can add his own implementation to report the file name and line number,
		766	tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
29	mjames	767	/* USER CODE END 6 */
		768	}
50	mjames	769	#endif /* USE_FULL_ASSERT */
2	mjames	770
		771	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Subversion Repositories DashDisplay

(root)/branches/Dashboard_L152_210623/Src/main.c – Rev 50