Subversion Repositories DashDisplay

/* USER CODE BEGIN Header */

/**

  ******************************************************************************

  * @file    stm32l1xx_hal_conf.h

  * @brief   HAL configuration file.

  ******************************************************************************

  * @attention

  *

  * Copyright (c) 2017 STMicroelectronics.

  * All rights reserved.

  *

  * This software is licensed under terms that can be found in the LICENSE file

  * in the root directory of this software component.

  * If no LICENSE file comes with this software, it is provided AS-IS.

  *

  ******************************************************************************

  */

/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/

#ifndef __STM32L1xx_HAL_CONF_H

#define __STM32L1xx_HAL_CONF_H

#ifdef __cplusplus

 extern "C" {

#endif

/* Exported types ------------------------------------------------------------*/

/* Exported constants --------------------------------------------------------*/

/* ########################## Module Selection ############################## */

/**

  * @brief This is the list of modules to be used in the HAL driver

  */

#define HAL_MODULE_ENABLED

/*#define HAL_ADC_MODULE_ENABLED   */

/*#define HAL_CRYP_MODULE_ENABLED   */

/*#define HAL_COMP_MODULE_ENABLED   */

/*#define HAL_CRC_MODULE_ENABLED   */

/*#define HAL_CRYP_MODULE_ENABLED   */

/*#define HAL_DAC_MODULE_ENABLED   */

#define HAL_I2C_MODULE_ENABLED

/*#define HAL_I2S_MODULE_ENABLED   */

/*#define HAL_IRDA_MODULE_ENABLED   */

/*#define HAL_IWDG_MODULE_ENABLED   */

/*#define HAL_LCD_MODULE_ENABLED   */

/*#define HAL_NOR_MODULE_ENABLED   */

/*#define HAL_OPAMP_MODULE_ENABLED   */

/*#define HAL_PCD_MODULE_ENABLED   */

/*#define HAL_RTC_MODULE_ENABLED   */

/*#define HAL_SD_MODULE_ENABLED   */

/*#define HAL_SMARTCARD_MODULE_ENABLED   */

#define HAL_SPI_MODULE_ENABLED

/*#define HAL_SRAM_MODULE_ENABLED   */

#define HAL_TIM_MODULE_ENABLED

#define HAL_UART_MODULE_ENABLED

/*#define HAL_USART_MODULE_ENABLED   */

/*#define HAL_WWDG_MODULE_ENABLED   */

#define HAL_GPIO_MODULE_ENABLED

#define HAL_EXTI_MODULE_ENABLED

#define HAL_DMA_MODULE_ENABLED

#define HAL_RCC_MODULE_ENABLED

#define HAL_FLASH_MODULE_ENABLED

#define HAL_PWR_MODULE_ENABLED

#define HAL_CORTEX_MODULE_ENABLED

/* ########################## Oscillator Values adaptation ####################*/

/**

  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.

  *        This value is used by the RCC HAL module to compute the system frequency

  *        (when HSE is used as system clock source, directly or through the PLL).

  */

#if !defined  (HSE_VALUE)

  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */

#endif /* HSE_VALUE */

#if !defined  (HSE_STARTUP_TIMEOUT)

  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */

#endif /* HSE_STARTUP_TIMEOUT */

/**

  * @brief Internal Multiple Speed oscillator (MSI) default value.

  *        This value is the default MSI range value after Reset.

  */

#if !defined  (MSI_VALUE)

  #define MSI_VALUE    ((uint32_t)2097000) /*!< Value of the Internal oscillator in Hz*/

#endif /* MSI_VALUE */

/**

  * @brief Internal High Speed oscillator (HSI) value.

  *        This value is used by the RCC HAL module to compute the system frequency

  *        (when HSI is used as system clock source, directly or through the PLL).

  */

#if !defined  (HSI_VALUE)

  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/

#endif /* HSI_VALUE */

/**

  * @brief Internal Low Speed oscillator (LSI) value.

  */

#if !defined  (LSI_VALUE)

  #define LSI_VALUE    (37000U) /*!< LSI Typical Value in Hz*/

#endif /* LSI_VALUE */          /*!< Value of the Internal Low Speed oscillator in Hz

                                     The real value may vary depending on the variations

                                     in voltage and temperature.*/

/**

  * @brief External Low Speed oscillator (LSE) value.

  *        This value is used by the UART, RTC HAL module to compute the system frequency

  */

#if !defined  (LSE_VALUE)

  #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/

#endif /* LSE_VALUE */

#if !defined  (LSE_STARTUP_TIMEOUT)

  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */

#endif /* HSE_STARTUP_TIMEOUT */

/* Tip: To avoid modifying this file each time you need to use different HSE,

   ===  you can define the HSE value in your toolchain compiler preprocessor. */

/* ########################### System Configuration ######################### */

/**

  * @brief This is the HAL system configuration section

  */

#define  VDD_VALUE                                        ((uint32_t)3300) /*!< Value of VDD in mv */

#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority */

#define  USE_RTOS                     0

#define  PREFETCH_ENABLE              0

#define  INSTRUCTION_CACHE_ENABLE     1

#define  DATA_CACHE_ENABLE            1

/* ########################## Assert Selection ############################## */

/**

  * @brief Uncomment the line below to expanse the "assert_param" macro in the

  *        HAL drivers code

  */

/* #define USE_FULL_ASSERT    1U */

/* ################## Register callback feature configuration ############### */

/**

  * @brief Set below the peripheral configuration  to "1U" to add the support

  *        of HAL callback registration/deregistration feature for the HAL

  *        driver(s). This allows user application to provide specific callback

  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting

  *        the default weak callback functions (see each stm32l0xx_hal_ppp.h file

  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef

  *        for each PPP peripheral).

  */

#define USE_HAL_ADC_REGISTER_CALLBACKS        0U

#define USE_HAL_COMP_REGISTER_CALLBACKS       0U

#define USE_HAL_DAC_REGISTER_CALLBACKS        0U

#define USE_HAL_I2C_REGISTER_CALLBACKS        0U

#define USE_HAL_I2S_REGISTER_CALLBACKS        0U

#define USE_HAL_IRDA_REGISTER_CALLBACKS       0U

#define USE_HAL_OPAMP_REGISTER_CALLBACKS      0U

#define USE_HAL_PCD_REGISTER_CALLBACKS        0U

#define USE_HAL_RTC_REGISTER_CALLBACKS        0U

#define USE_HAL_SDMMC_REGISTER_CALLBACKS      0U

#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U

#define USE_HAL_SPI_REGISTER_CALLBACKS        0U

#define USE_HAL_TIM_REGISTER_CALLBACKS        0U

#define USE_HAL_UART_REGISTER_CALLBACKS       0U

#define USE_HAL_USART_REGISTER_CALLBACKS      0U

#define USE_HAL_WWDG_REGISTER_CALLBACKS       0U

/* ################## SPI peripheral configuration ########################## */

/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver

 * Activated: CRC code is present inside driver

 * Deactivated: CRC code cleaned from driver

 */

#define USE_SPI_CRC                   0U

/* Includes ------------------------------------------------------------------*/

/**

  * @brief Include module's header file

  */

#ifdef HAL_RCC_MODULE_ENABLED

 #include "stm32l1xx_hal_rcc.h"

#endif /* HAL_RCC_MODULE_ENABLED */

#ifdef HAL_GPIO_MODULE_ENABLED

 #include "stm32l1xx_hal_gpio.h"

#endif /* HAL_GPIO_MODULE_ENABLED */

#ifdef HAL_DMA_MODULE_ENABLED

  #include "stm32l1xx_hal_dma.h"

#endif /* HAL_DMA_MODULE_ENABLED */

#ifdef HAL_CORTEX_MODULE_ENABLED

 #include "stm32l1xx_hal_cortex.h"

#endif /* HAL_CORTEX_MODULE_ENABLED */

#ifdef HAL_ADC_MODULE_ENABLED

 #include "stm32l1xx_hal_adc.h"

#endif /* HAL_ADC_MODULE_ENABLED */

#ifdef HAL_COMP_MODULE_ENABLED

  #include "stm32l1xx_hal_comp.h"

#endif /* HAL_COMP_MODULE_ENABLED */

#ifdef HAL_CRC_MODULE_ENABLED

 #include "stm32l1xx_hal_crc.h"

#endif /* HAL_CRC_MODULE_ENABLED */

#ifdef HAL_CRYP_MODULE_ENABLED

 #include "stm32l1xx_hal_cryp.h"

#endif /* HAL_CRYP_MODULE_ENABLED */

#ifdef HAL_DAC_MODULE_ENABLED

 #include "stm32l1xx_hal_dac.h"

#endif /* HAL_DAC_MODULE_ENABLED */

#ifdef HAL_FLASH_MODULE_ENABLED

 #include "stm32l1xx_hal_flash.h"

#endif /* HAL_FLASH_MODULE_ENABLED */

#ifdef HAL_SRAM_MODULE_ENABLED

 #include "stm32l1xx_hal_sram.h"

#endif /* HAL_SRAM_MODULE_ENABLED */

#ifdef HAL_NOR_MODULE_ENABLED

 #include "stm32l1xx_hal_nor.h"

#endif /* HAL_NOR_MODULE_ENABLED */

#ifdef HAL_I2C_MODULE_ENABLED

 #include "stm32l1xx_hal_i2c.h"

#endif /* HAL_I2C_MODULE_ENABLED */

#ifdef HAL_I2S_MODULE_ENABLED

 #include "stm32l1xx_hal_i2s.h"

#endif /* HAL_I2S_MODULE_ENABLED */

#ifdef HAL_IWDG_MODULE_ENABLED

 #include "stm32l1xx_hal_iwdg.h"

#endif /* HAL_IWDG_MODULE_ENABLED */

#ifdef HAL_LCD_MODULE_ENABLED

 #include "stm32l1xx_hal_lcd.h"

#endif /* HAL_LCD_MODULE_ENABLED */

#ifdef HAL_OPAMP_MODULE_ENABLED

 #include "stm32l1xx_hal_opamp.h"

#endif /* HAL_OPAMP_MODULE_ENABLED */

#ifdef HAL_PWR_MODULE_ENABLED

 #include "stm32l1xx_hal_pwr.h"

#endif /* HAL_PWR_MODULE_ENABLED */

#ifdef HAL_RTC_MODULE_ENABLED

 #include "stm32l1xx_hal_rtc.h"

#endif /* HAL_RTC_MODULE_ENABLED */

#ifdef HAL_SD_MODULE_ENABLED

 #include "stm32l1xx_hal_sd.h"

#endif /* HAL_SD_MODULE_ENABLED */

#ifdef HAL_SPI_MODULE_ENABLED

 #include "stm32l1xx_hal_spi.h"

#endif /* HAL_SPI_MODULE_ENABLED */

#ifdef HAL_TIM_MODULE_ENABLED

 #include "stm32l1xx_hal_tim.h"

#endif /* HAL_TIM_MODULE_ENABLED */

#ifdef HAL_UART_MODULE_ENABLED

 #include "stm32l1xx_hal_uart.h"

#endif /* HAL_UART_MODULE_ENABLED */

#ifdef HAL_USART_MODULE_ENABLED

 #include "stm32l1xx_hal_usart.h"

#endif /* HAL_USART_MODULE_ENABLED */

#ifdef HAL_IRDA_MODULE_ENABLED

 #include "stm32l1xx_hal_irda.h"

#endif /* HAL_IRDA_MODULE_ENABLED */

#ifdef HAL_SMARTCARD_MODULE_ENABLED

 #include "stm32l1xx_hal_smartcard.h"

#endif /* HAL_SMARTCARD_MODULE_ENABLED */

#ifdef HAL_WWDG_MODULE_ENABLED

 #include "stm32l1xx_hal_wwdg.h"

#endif /* HAL_WWDG_MODULE_ENABLED */

#ifdef HAL_PCD_MODULE_ENABLED

 #include "stm32l1xx_hal_pcd.h"

#endif /* HAL_PCD_MODULE_ENABLED */

#ifdef HAL_EXTI_MODULE_ENABLED

 #include "stm32l1xx_hal_exti.h"

#endif /* HAL_EXTI_MODULE_ENABLED */

/* Exported macro ------------------------------------------------------------*/

#ifdef  USE_FULL_ASSERT

/**

  * @brief  The assert_param macro is used for function's parameters check.

  * @param  expr: If expr is false, it calls assert_failed function

  *         which reports the name of the source file and the source

  *         line number of the call that failed.

  *         If expr is true, it returns no value.

  * @retval None

  */

  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))

/* Exported functions ------------------------------------------------------- */

  void assert_failed(uint8_t* file, uint32_t line);

#else

  #define assert_param(expr) ((void)0U)

#endif /* USE_FULL_ASSERT */

#ifdef __cplusplus

}

#endif

#endif /* __STM32L1xx_HAL_CONF_H */