Rev 56 | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 56 | mjames | 1 | /** |
| 2 | ****************************************************************************** |
||
| 3 | * @file stm32l1xx_hal_lcd.h |
||
| 4 | * @author MCD Application Team |
||
| 5 | * @brief Header file of LCD Controller HAL module. |
||
| 6 | ****************************************************************************** |
||
| 7 | * @attention |
||
| 8 | * |
||
| 9 | * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
||
| 10 | * All rights reserved.</center></h2> |
||
| 11 | * |
||
| 12 | * This software component is licensed by ST under BSD 3-Clause license, |
||
| 13 | * the "License"; You may not use this file except in compliance with the |
||
| 14 | * License. You may obtain a copy of the License at: |
||
| 15 | * opensource.org/licenses/BSD-3-Clause |
||
| 16 | * |
||
| 17 | ****************************************************************************** |
||
| 18 | */ |
||
| 19 | |||
| 20 | /* Define to prevent recursive inclusion -------------------------------------*/ |
||
| 21 | #ifndef __STM32L1xx_HAL_LCD_H |
||
| 22 | #define __STM32L1xx_HAL_LCD_H |
||
| 23 | |||
| 24 | #ifdef __cplusplus |
||
| 25 | extern "C" { |
||
| 26 | #endif |
||
| 27 | |||
| 28 | /** @addtogroup STM32L1xx_HAL_Driver |
||
| 29 | * @{ |
||
| 30 | */ |
||
| 31 | |||
| 32 | #if defined (STM32L100xB) || defined (STM32L100xBA) || defined (STM32L100xC) ||\ |
||
| 33 | defined (STM32L152xB) || defined (STM32L152xBA) || defined (STM32L152xC) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L152xE) || defined (STM32L152xDX) ||\ |
||
| 34 | defined (STM32L162xC) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L162xE) || defined (STM32L162xDX) |
||
| 35 | |||
| 36 | /* Includes ------------------------------------------------------------------*/ |
||
| 37 | #include "stm32l1xx_hal_def.h" |
||
| 38 | |||
| 39 | /** @addtogroup LCD |
||
| 40 | * @{ |
||
| 41 | */ |
||
| 42 | |||
| 43 | /* Exported types ------------------------------------------------------------*/ |
||
| 44 | |||
| 45 | /** @defgroup LCD_Exported_Types LCD Exported Types |
||
| 46 | * @{ |
||
| 47 | */ |
||
| 48 | |||
| 49 | /** |
||
| 50 | * @brief LCD Init structure definition |
||
| 51 | */ |
||
| 52 | |||
| 53 | typedef struct |
||
| 54 | { |
||
| 55 | uint32_t Prescaler; /*!< Configures the LCD Prescaler. |
||
| 56 | This parameter can be one value of @ref LCD_Prescaler */ |
||
| 57 | uint32_t Divider; /*!< Configures the LCD Divider. |
||
| 58 | This parameter can be one value of @ref LCD_Divider */ |
||
| 59 | uint32_t Duty; /*!< Configures the LCD Duty. |
||
| 60 | This parameter can be one value of @ref LCD_Duty */ |
||
| 61 | uint32_t Bias; /*!< Configures the LCD Bias. |
||
| 62 | This parameter can be one value of @ref LCD_Bias */ |
||
| 63 | uint32_t VoltageSource; /*!< Selects the LCD Voltage source. |
||
| 64 | This parameter can be one value of @ref LCD_Voltage_Source */ |
||
| 65 | uint32_t Contrast; /*!< Configures the LCD Contrast. |
||
| 66 | This parameter can be one value of @ref LCD_Contrast */ |
||
| 67 | uint32_t DeadTime; /*!< Configures the LCD Dead Time. |
||
| 68 | This parameter can be one value of @ref LCD_DeadTime */ |
||
| 69 | uint32_t PulseOnDuration; /*!< Configures the LCD Pulse On Duration. |
||
| 70 | This parameter can be one value of @ref LCD_PulseOnDuration */ |
||
| 71 | uint32_t HighDrive; /*!< Configures the LCD High Drive. |
||
| 72 | This parameter can be one value of @ref LCD_HighDrive */ |
||
| 73 | uint32_t BlinkMode; /*!< Configures the LCD Blink Mode. |
||
| 74 | This parameter can be one value of @ref LCD_BlinkMode */ |
||
| 75 | uint32_t BlinkFrequency; /*!< Configures the LCD Blink frequency. |
||
| 76 | This parameter can be one value of @ref LCD_BlinkFrequency */ |
||
| 77 | uint32_t MuxSegment; /*!< Enable or disable mux segment. |
||
| 78 | This parameter can be set to ENABLE or DISABLE. */ |
||
| 79 | }LCD_InitTypeDef; |
||
| 80 | |||
| 81 | /** |
||
| 82 | * @brief HAL LCD State structures definition |
||
| 83 | */ |
||
| 84 | typedef enum |
||
| 85 | { |
||
| 86 | HAL_LCD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ |
||
| 87 | HAL_LCD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
||
| 88 | HAL_LCD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ |
||
| 89 | HAL_LCD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
||
| 90 | HAL_LCD_STATE_ERROR = 0x04 /*!< Error */ |
||
| 91 | }HAL_LCD_StateTypeDef; |
||
| 92 | |||
| 93 | /** |
||
| 94 | * @brief UART handle Structure definition |
||
| 95 | */ |
||
| 96 | typedef struct |
||
| 97 | { |
||
| 98 | LCD_TypeDef *Instance; /* LCD registers base address */ |
||
| 99 | |||
| 100 | LCD_InitTypeDef Init; /* LCD communication parameters */ |
||
| 101 | |||
| 102 | HAL_LockTypeDef Lock; /* Locking object */ |
||
| 103 | |||
| 104 | __IO HAL_LCD_StateTypeDef State; /* LCD communication state */ |
||
| 105 | |||
| 106 | __IO uint32_t ErrorCode; /* LCD Error code */ |
||
| 107 | |||
| 108 | }LCD_HandleTypeDef; |
||
| 109 | |||
| 110 | /** |
||
| 111 | * @} |
||
| 112 | */ |
||
| 113 | |||
| 114 | /* Exported constants --------------------------------------------------------*/ |
||
| 115 | |||
| 116 | /** @defgroup LCD_Exported_Constants LCD Exported Constants |
||
| 117 | * @{ |
||
| 118 | */ |
||
| 119 | |||
| 120 | /** @defgroup LCD_Error_Codes LCD Error Codes |
||
| 121 | * @{ |
||
| 122 | */ |
||
| 123 | |||
| 124 | #define HAL_LCD_ERROR_NONE (0x00U) /*!< No error */ |
||
| 125 | #define HAL_LCD_ERROR_FCRSF (0x01U) /*!< Synchro flag timeout error */ |
||
| 126 | #define HAL_LCD_ERROR_UDR (0x02U) /*!< Update display request flag timeout error */ |
||
| 127 | #define HAL_LCD_ERROR_UDD (0x04U) /*!< Update display done flag timeout error */ |
||
| 128 | #define HAL_LCD_ERROR_ENS (0x08U) /*!< LCD enabled status flag timeout error */ |
||
| 129 | #define HAL_LCD_ERROR_RDY (0x10U) /*!< LCD Booster ready timeout error */ |
||
| 130 | |||
| 131 | /** |
||
| 132 | * @} |
||
| 133 | */ |
||
| 134 | |||
| 135 | /** @defgroup LCD_Prescaler LCD Prescaler |
||
| 136 | * @{ |
||
| 137 | */ |
||
| 138 | |||
| 139 | #define LCD_PRESCALER_1 (0x00000000U) /*!< CLKPS = LCDCLK */ |
||
| 140 | #define LCD_PRESCALER_2 (0x00400000U) /*!< CLKPS = LCDCLK/2 */ |
||
| 141 | #define LCD_PRESCALER_4 (0x00800000U) /*!< CLKPS = LCDCLK/4 */ |
||
| 142 | #define LCD_PRESCALER_8 (0x00C00000U) /*!< CLKPS = LCDCLK/8 */ |
||
| 143 | #define LCD_PRESCALER_16 (0x01000000U) /*!< CLKPS = LCDCLK/16 */ |
||
| 144 | #define LCD_PRESCALER_32 (0x01400000U) /*!< CLKPS = LCDCLK/32 */ |
||
| 145 | #define LCD_PRESCALER_64 (0x01800000U) /*!< CLKPS = LCDCLK/64 */ |
||
| 146 | #define LCD_PRESCALER_128 (0x01C00000U) /*!< CLKPS = LCDCLK/128 */ |
||
| 147 | #define LCD_PRESCALER_256 (0x02000000U) /*!< CLKPS = LCDCLK/256 */ |
||
| 148 | #define LCD_PRESCALER_512 (0x02400000U) /*!< CLKPS = LCDCLK/512 */ |
||
| 149 | #define LCD_PRESCALER_1024 (0x02800000U) /*!< CLKPS = LCDCLK/1024 */ |
||
| 150 | #define LCD_PRESCALER_2048 (0x02C00000U) /*!< CLKPS = LCDCLK/2048 */ |
||
| 151 | #define LCD_PRESCALER_4096 (0x03000000U) /*!< CLKPS = LCDCLK/4096 */ |
||
| 152 | #define LCD_PRESCALER_8192 (0x03400000U) /*!< CLKPS = LCDCLK/8192 */ |
||
| 153 | #define LCD_PRESCALER_16384 (0x03800000U) /*!< CLKPS = LCDCLK/16384 */ |
||
| 154 | #define LCD_PRESCALER_32768 ((uint32_t)LCD_FCR_PS) /*!< CLKPS = LCDCLK/32768 */ |
||
| 155 | |||
| 156 | #define IS_LCD_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LCD_PRESCALER_1) || \ |
||
| 157 | ((__PRESCALER__) == LCD_PRESCALER_2) || \ |
||
| 158 | ((__PRESCALER__) == LCD_PRESCALER_4) || \ |
||
| 159 | ((__PRESCALER__) == LCD_PRESCALER_8) || \ |
||
| 160 | ((__PRESCALER__) == LCD_PRESCALER_16) || \ |
||
| 161 | ((__PRESCALER__) == LCD_PRESCALER_32) || \ |
||
| 162 | ((__PRESCALER__) == LCD_PRESCALER_64) || \ |
||
| 163 | ((__PRESCALER__) == LCD_PRESCALER_128) || \ |
||
| 164 | ((__PRESCALER__) == LCD_PRESCALER_256) || \ |
||
| 165 | ((__PRESCALER__) == LCD_PRESCALER_512) || \ |
||
| 166 | ((__PRESCALER__) == LCD_PRESCALER_1024) || \ |
||
| 167 | ((__PRESCALER__) == LCD_PRESCALER_2048) || \ |
||
| 168 | ((__PRESCALER__) == LCD_PRESCALER_4096) || \ |
||
| 169 | ((__PRESCALER__) == LCD_PRESCALER_8192) || \ |
||
| 170 | ((__PRESCALER__) == LCD_PRESCALER_16384) || \ |
||
| 171 | ((__PRESCALER__) == LCD_PRESCALER_32768)) |
||
| 172 | |||
| 173 | /** |
||
| 174 | * @} |
||
| 175 | */ |
||
| 176 | |||
| 177 | /** @defgroup LCD_Divider LCD Divider |
||
| 178 | * @{ |
||
| 179 | */ |
||
| 180 | |||
| 181 | #define LCD_DIVIDER_16 (0x00000000U) /*!< LCD frequency = CLKPS/16 */ |
||
| 182 | #define LCD_DIVIDER_17 (0x00040000U) /*!< LCD frequency = CLKPS/17 */ |
||
| 183 | #define LCD_DIVIDER_18 (0x00080000U) /*!< LCD frequency = CLKPS/18 */ |
||
| 184 | #define LCD_DIVIDER_19 (0x000C0000U) /*!< LCD frequency = CLKPS/19 */ |
||
| 185 | #define LCD_DIVIDER_20 (0x00100000U) /*!< LCD frequency = CLKPS/20 */ |
||
| 186 | #define LCD_DIVIDER_21 (0x00140000U) /*!< LCD frequency = CLKPS/21 */ |
||
| 187 | #define LCD_DIVIDER_22 (0x00180000U) /*!< LCD frequency = CLKPS/22 */ |
||
| 188 | #define LCD_DIVIDER_23 (0x001C0000U) /*!< LCD frequency = CLKPS/23 */ |
||
| 189 | #define LCD_DIVIDER_24 (0x00200000U) /*!< LCD frequency = CLKPS/24 */ |
||
| 190 | #define LCD_DIVIDER_25 (0x00240000U) /*!< LCD frequency = CLKPS/25 */ |
||
| 191 | #define LCD_DIVIDER_26 (0x00280000U) /*!< LCD frequency = CLKPS/26 */ |
||
| 192 | #define LCD_DIVIDER_27 (0x002C0000U) /*!< LCD frequency = CLKPS/27 */ |
||
| 193 | #define LCD_DIVIDER_28 (0x00300000U) /*!< LCD frequency = CLKPS/28 */ |
||
| 194 | #define LCD_DIVIDER_29 (0x00340000U) /*!< LCD frequency = CLKPS/29 */ |
||
| 195 | #define LCD_DIVIDER_30 (0x00380000U) /*!< LCD frequency = CLKPS/30 */ |
||
| 196 | #define LCD_DIVIDER_31 ((uint32_t)LCD_FCR_DIV) /*!< LCD frequency = CLKPS/31 */ |
||
| 197 | |||
| 198 | #define IS_LCD_DIVIDER(__DIVIDER__) (((__DIVIDER__) == LCD_DIVIDER_16) || \ |
||
| 199 | ((__DIVIDER__) == LCD_DIVIDER_17) || \ |
||
| 200 | ((__DIVIDER__) == LCD_DIVIDER_18) || \ |
||
| 201 | ((__DIVIDER__) == LCD_DIVIDER_19) || \ |
||
| 202 | ((__DIVIDER__) == LCD_DIVIDER_20) || \ |
||
| 203 | ((__DIVIDER__) == LCD_DIVIDER_21) || \ |
||
| 204 | ((__DIVIDER__) == LCD_DIVIDER_22) || \ |
||
| 205 | ((__DIVIDER__) == LCD_DIVIDER_23) || \ |
||
| 206 | ((__DIVIDER__) == LCD_DIVIDER_24) || \ |
||
| 207 | ((__DIVIDER__) == LCD_DIVIDER_25) || \ |
||
| 208 | ((__DIVIDER__) == LCD_DIVIDER_26) || \ |
||
| 209 | ((__DIVIDER__) == LCD_DIVIDER_27) || \ |
||
| 210 | ((__DIVIDER__) == LCD_DIVIDER_28) || \ |
||
| 211 | ((__DIVIDER__) == LCD_DIVIDER_29) || \ |
||
| 212 | ((__DIVIDER__) == LCD_DIVIDER_30) || \ |
||
| 213 | ((__DIVIDER__) == LCD_DIVIDER_31)) |
||
| 214 | |||
| 215 | /** |
||
| 216 | * @} |
||
| 217 | */ |
||
| 218 | |||
| 219 | |||
| 220 | /** @defgroup LCD_Duty LCD Duty |
||
| 221 | * @{ |
||
| 222 | */ |
||
| 223 | |||
| 224 | #define LCD_DUTY_STATIC (0x00000000U) /*!< Static duty */ |
||
| 225 | #define LCD_DUTY_1_2 (LCD_CR_DUTY_0) /*!< 1/2 duty */ |
||
| 226 | #define LCD_DUTY_1_3 (LCD_CR_DUTY_1) /*!< 1/3 duty */ |
||
| 227 | #define LCD_DUTY_1_4 ((LCD_CR_DUTY_1 | LCD_CR_DUTY_0)) /*!< 1/4 duty */ |
||
| 228 | #define LCD_DUTY_1_8 (LCD_CR_DUTY_2) /*!< 1/8 duty */ |
||
| 229 | |||
| 230 | #define IS_LCD_DUTY(__DUTY__) (((__DUTY__) == LCD_DUTY_STATIC) || \ |
||
| 231 | ((__DUTY__) == LCD_DUTY_1_2) || \ |
||
| 232 | ((__DUTY__) == LCD_DUTY_1_3) || \ |
||
| 233 | ((__DUTY__) == LCD_DUTY_1_4) || \ |
||
| 234 | ((__DUTY__) == LCD_DUTY_1_8)) |
||
| 235 | |||
| 236 | /** |
||
| 237 | * @} |
||
| 238 | */ |
||
| 239 | |||
| 240 | |||
| 241 | /** @defgroup LCD_Bias LCD Bias |
||
| 242 | * @{ |
||
| 243 | */ |
||
| 244 | |||
| 245 | #define LCD_BIAS_1_4 (0x00000000U) /*!< 1/4 Bias */ |
||
| 246 | #define LCD_BIAS_1_2 LCD_CR_BIAS_0 /*!< 1/2 Bias */ |
||
| 247 | #define LCD_BIAS_1_3 LCD_CR_BIAS_1 /*!< 1/3 Bias */ |
||
| 248 | |||
| 249 | #define IS_LCD_BIAS(__BIAS__) (((__BIAS__) == LCD_BIAS_1_4) || \ |
||
| 250 | ((__BIAS__) == LCD_BIAS_1_2) || \ |
||
| 251 | ((__BIAS__) == LCD_BIAS_1_3)) |
||
| 252 | /** |
||
| 253 | * @} |
||
| 254 | */ |
||
| 255 | |||
| 256 | /** @defgroup LCD_Voltage_Source LCD Voltage Source |
||
| 257 | * @{ |
||
| 258 | */ |
||
| 259 | |||
| 260 | #define LCD_VOLTAGESOURCE_INTERNAL (0x00000000U) /*!< Internal voltage source for the LCD */ |
||
| 261 | #define LCD_VOLTAGESOURCE_EXTERNAL LCD_CR_VSEL /*!< External voltage source for the LCD */ |
||
| 262 | |||
| 263 | #define IS_LCD_VOLTAGE_SOURCE(SOURCE) (((SOURCE) == LCD_VOLTAGESOURCE_INTERNAL) || \ |
||
| 264 | ((SOURCE) == LCD_VOLTAGESOURCE_EXTERNAL)) |
||
| 265 | |||
| 266 | /** |
||
| 267 | * @} |
||
| 268 | */ |
||
| 269 | |||
| 270 | /** @defgroup LCD_Interrupts LCD Interrupts |
||
| 271 | * @{ |
||
| 272 | */ |
||
| 273 | #define LCD_IT_SOF LCD_FCR_SOFIE |
||
| 274 | #define LCD_IT_UDD LCD_FCR_UDDIE |
||
| 275 | |||
| 276 | /** |
||
| 277 | * @} |
||
| 278 | */ |
||
| 279 | |||
| 280 | /** @defgroup LCD_PulseOnDuration LCD Pulse On Duration |
||
| 281 | * @{ |
||
| 282 | */ |
||
| 283 | |||
| 284 | #define LCD_PULSEONDURATION_0 (0x00000000U) /*!< Pulse ON duration = 0 pulse */ |
||
| 285 | #define LCD_PULSEONDURATION_1 (LCD_FCR_PON_0) /*!< Pulse ON duration = 1/CK_PS */ |
||
| 286 | #define LCD_PULSEONDURATION_2 (LCD_FCR_PON_1) /*!< Pulse ON duration = 2/CK_PS */ |
||
| 287 | #define LCD_PULSEONDURATION_3 (LCD_FCR_PON_1 | LCD_FCR_PON_0) /*!< Pulse ON duration = 3/CK_PS */ |
||
| 288 | #define LCD_PULSEONDURATION_4 (LCD_FCR_PON_2) /*!< Pulse ON duration = 4/CK_PS */ |
||
| 289 | #define LCD_PULSEONDURATION_5 (LCD_FCR_PON_2 | LCD_FCR_PON_0) /*!< Pulse ON duration = 5/CK_PS */ |
||
| 290 | #define LCD_PULSEONDURATION_6 (LCD_FCR_PON_2 | LCD_FCR_PON_1) /*!< Pulse ON duration = 6/CK_PS */ |
||
| 291 | #define LCD_PULSEONDURATION_7 (LCD_FCR_PON) /*!< Pulse ON duration = 7/CK_PS */ |
||
| 292 | |||
| 293 | #define IS_LCD_PULSE_ON_DURATION(__DURATION__) (((__DURATION__) == LCD_PULSEONDURATION_0) || \ |
||
| 294 | ((__DURATION__) == LCD_PULSEONDURATION_1) || \ |
||
| 295 | ((__DURATION__) == LCD_PULSEONDURATION_2) || \ |
||
| 296 | ((__DURATION__) == LCD_PULSEONDURATION_3) || \ |
||
| 297 | ((__DURATION__) == LCD_PULSEONDURATION_4) || \ |
||
| 298 | ((__DURATION__) == LCD_PULSEONDURATION_5) || \ |
||
| 299 | ((__DURATION__) == LCD_PULSEONDURATION_6) || \ |
||
| 300 | ((__DURATION__) == LCD_PULSEONDURATION_7)) |
||
| 301 | /** |
||
| 302 | * @} |
||
| 303 | */ |
||
| 304 | |||
| 305 | /** @defgroup LCD_HighDrive LCD HighDrive |
||
| 306 | * @{ |
||
| 307 | */ |
||
| 308 | |||
| 309 | #define LCD_HIGHDRIVE_0 (0x00000000U) /*!< Low resistance Drive */ |
||
| 310 | #define LCD_HIGHDRIVE_1 (LCD_FCR_HD) /*!< High resistance Drive */ |
||
| 311 | |||
| 312 | #define IS_LCD_HIGHDRIVE(__HIGHDRIVE__) (((__HIGHDRIVE__) == LCD_HIGHDRIVE_0) || \ |
||
| 313 | ((__HIGHDRIVE__) == LCD_HIGHDRIVE_1)) |
||
| 314 | /** |
||
| 315 | * @} |
||
| 316 | */ |
||
| 317 | |||
| 318 | /** @defgroup LCD_DeadTime LCD Dead Time |
||
| 319 | * @{ |
||
| 320 | */ |
||
| 321 | |||
| 322 | #define LCD_DEADTIME_0 (0x00000000U) /*!< No dead Time */ |
||
| 323 | #define LCD_DEADTIME_1 (LCD_FCR_DEAD_0) /*!< One Phase between different couple of Frame */ |
||
| 324 | #define LCD_DEADTIME_2 (LCD_FCR_DEAD_1) /*!< Two Phase between different couple of Frame */ |
||
| 325 | #define LCD_DEADTIME_3 (LCD_FCR_DEAD_1 | LCD_FCR_DEAD_0) /*!< Three Phase between different couple of Frame */ |
||
| 326 | #define LCD_DEADTIME_4 (LCD_FCR_DEAD_2) /*!< Four Phase between different couple of Frame */ |
||
| 327 | #define LCD_DEADTIME_5 (LCD_FCR_DEAD_2 | LCD_FCR_DEAD_0) /*!< Five Phase between different couple of Frame */ |
||
| 328 | #define LCD_DEADTIME_6 (LCD_FCR_DEAD_2 | LCD_FCR_DEAD_1) /*!< Six Phase between different couple of Frame */ |
||
| 329 | #define LCD_DEADTIME_7 (LCD_FCR_DEAD) /*!< Seven Phase between different couple of Frame */ |
||
| 330 | |||
| 331 | #define IS_LCD_DEAD_TIME(__TIME__) (((__TIME__) == LCD_DEADTIME_0) || \ |
||
| 332 | ((__TIME__) == LCD_DEADTIME_1) || \ |
||
| 333 | ((__TIME__) == LCD_DEADTIME_2) || \ |
||
| 334 | ((__TIME__) == LCD_DEADTIME_3) || \ |
||
| 335 | ((__TIME__) == LCD_DEADTIME_4) || \ |
||
| 336 | ((__TIME__) == LCD_DEADTIME_5) || \ |
||
| 337 | ((__TIME__) == LCD_DEADTIME_6) || \ |
||
| 338 | ((__TIME__) == LCD_DEADTIME_7)) |
||
| 339 | /** |
||
| 340 | * @} |
||
| 341 | */ |
||
| 342 | |||
| 343 | /** @defgroup LCD_BlinkMode LCD Blink Mode |
||
| 344 | * @{ |
||
| 345 | */ |
||
| 346 | |||
| 347 | #define LCD_BLINKMODE_OFF (0x00000000U) /*!< Blink disabled */ |
||
| 348 | #define LCD_BLINKMODE_SEG0_COM0 (LCD_FCR_BLINK_0) /*!< Blink enabled on SEG[0], COM[0] (1 pixel) */ |
||
| 349 | #define LCD_BLINKMODE_SEG0_ALLCOM (LCD_FCR_BLINK_1) /*!< Blink enabled on SEG[0], all COM (up to |
||
| 350 | 8 pixels according to the programmed duty) */ |
||
| 351 | #define LCD_BLINKMODE_ALLSEG_ALLCOM (LCD_FCR_BLINK) /*!< Blink enabled on all SEG and all COM (all pixels) */ |
||
| 352 | |||
| 353 | #define IS_LCD_BLINK_MODE(__MODE__) (((__MODE__) == LCD_BLINKMODE_OFF) || \ |
||
| 354 | ((__MODE__) == LCD_BLINKMODE_SEG0_COM0) || \ |
||
| 355 | ((__MODE__) == LCD_BLINKMODE_SEG0_ALLCOM) || \ |
||
| 356 | ((__MODE__) == LCD_BLINKMODE_ALLSEG_ALLCOM)) |
||
| 357 | /** |
||
| 358 | * @} |
||
| 359 | */ |
||
| 360 | |||
| 361 | /** @defgroup LCD_BlinkFrequency LCD Blink Frequency |
||
| 362 | * @{ |
||
| 363 | */ |
||
| 364 | |||
| 365 | #define LCD_BLINKFREQUENCY_DIV8 (0x00000000U) /*!< The Blink frequency = fLCD/8 */ |
||
| 366 | #define LCD_BLINKFREQUENCY_DIV16 (LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/16 */ |
||
| 367 | #define LCD_BLINKFREQUENCY_DIV32 (LCD_FCR_BLINKF_1) /*!< The Blink frequency = fLCD/32 */ |
||
| 368 | #define LCD_BLINKFREQUENCY_DIV64 (LCD_FCR_BLINKF_1 | LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/64 */ |
||
| 369 | #define LCD_BLINKFREQUENCY_DIV128 (LCD_FCR_BLINKF_2) /*!< The Blink frequency = fLCD/128 */ |
||
| 370 | #define LCD_BLINKFREQUENCY_DIV256 (LCD_FCR_BLINKF_2 |LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/256 */ |
||
| 371 | #define LCD_BLINKFREQUENCY_DIV512 (LCD_FCR_BLINKF_2 |LCD_FCR_BLINKF_1) /*!< The Blink frequency = fLCD/512 */ |
||
| 372 | #define LCD_BLINKFREQUENCY_DIV1024 (LCD_FCR_BLINKF) /*!< The Blink frequency = fLCD/1024 */ |
||
| 373 | |||
| 374 | #define IS_LCD_BLINK_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV8) || \ |
||
| 375 | ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV16) || \ |
||
| 376 | ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV32) || \ |
||
| 377 | ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV64) || \ |
||
| 378 | ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV128) || \ |
||
| 379 | ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV256) || \ |
||
| 380 | ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV512) || \ |
||
| 381 | ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV1024)) |
||
| 382 | /** |
||
| 383 | * @} |
||
| 384 | */ |
||
| 385 | |||
| 386 | /** @defgroup LCD_Contrast LCD Contrast |
||
| 387 | * @{ |
||
| 388 | */ |
||
| 389 | |||
| 390 | #define LCD_CONTRASTLEVEL_0 (0x00000000U) /*!< Maximum Voltage = 2.60V */ |
||
| 391 | #define LCD_CONTRASTLEVEL_1 (LCD_FCR_CC_0) /*!< Maximum Voltage = 2.73V */ |
||
| 392 | #define LCD_CONTRASTLEVEL_2 (LCD_FCR_CC_1) /*!< Maximum Voltage = 2.86V */ |
||
| 393 | #define LCD_CONTRASTLEVEL_3 (LCD_FCR_CC_1 | LCD_FCR_CC_0) /*!< Maximum Voltage = 2.99V */ |
||
| 394 | #define LCD_CONTRASTLEVEL_4 (LCD_FCR_CC_2) /*!< Maximum Voltage = 3.12V */ |
||
| 395 | #define LCD_CONTRASTLEVEL_5 (LCD_FCR_CC_2 | LCD_FCR_CC_0) /*!< Maximum Voltage = 3.25V */ |
||
| 396 | #define LCD_CONTRASTLEVEL_6 (LCD_FCR_CC_2 | LCD_FCR_CC_1) /*!< Maximum Voltage = 3.38V */ |
||
| 397 | #define LCD_CONTRASTLEVEL_7 (LCD_FCR_CC) /*!< Maximum Voltage = 3.51V */ |
||
| 398 | |||
| 399 | #define IS_LCD_CONTRAST(__CONTRAST__) (((__CONTRAST__) == LCD_CONTRASTLEVEL_0) || \ |
||
| 400 | ((__CONTRAST__) == LCD_CONTRASTLEVEL_1) || \ |
||
| 401 | ((__CONTRAST__) == LCD_CONTRASTLEVEL_2) || \ |
||
| 402 | ((__CONTRAST__) == LCD_CONTRASTLEVEL_3) || \ |
||
| 403 | ((__CONTRAST__) == LCD_CONTRASTLEVEL_4) || \ |
||
| 404 | ((__CONTRAST__) == LCD_CONTRASTLEVEL_5) || \ |
||
| 405 | ((__CONTRAST__) == LCD_CONTRASTLEVEL_6) || \ |
||
| 406 | ((__CONTRAST__) == LCD_CONTRASTLEVEL_7)) |
||
| 407 | /** |
||
| 408 | * @} |
||
| 409 | */ |
||
| 410 | |||
| 411 | /** @defgroup LCD_MuxSegment LCD Mux Segment |
||
| 412 | * @{ |
||
| 413 | */ |
||
| 414 | |||
| 415 | #define LCD_MUXSEGMENT_DISABLE (0x00000000U) /*!< SEG pin multiplexing disabled */ |
||
| 416 | #define LCD_MUXSEGMENT_ENABLE (LCD_CR_MUX_SEG) /*!< SEG[31:28] are multiplexed with SEG[43:40] */ |
||
| 417 | |||
| 418 | #define IS_LCD_MUXSEGMENT(__VALUE__) (((__VALUE__) == LCD_MUXSEGMENT_ENABLE) || \ |
||
| 419 | ((__VALUE__) == LCD_MUXSEGMENT_DISABLE)) |
||
| 420 | /** |
||
| 421 | * @} |
||
| 422 | */ |
||
| 423 | |||
| 424 | /** @defgroup LCD_Flag LCD Flag |
||
| 425 | * @{ |
||
| 426 | */ |
||
| 427 | |||
| 428 | #define LCD_FLAG_ENS LCD_SR_ENS |
||
| 429 | #define LCD_FLAG_SOF LCD_SR_SOF |
||
| 430 | #define LCD_FLAG_UDR LCD_SR_UDR |
||
| 431 | #define LCD_FLAG_UDD LCD_SR_UDD |
||
| 432 | #define LCD_FLAG_RDY LCD_SR_RDY |
||
| 433 | #define LCD_FLAG_FCRSF LCD_SR_FCRSR |
||
| 434 | |||
| 435 | /** |
||
| 436 | * @} |
||
| 437 | */ |
||
| 438 | |||
| 439 | /** @defgroup LCD_RAMRegister LCD RAMRegister |
||
| 440 | * @{ |
||
| 441 | */ |
||
| 442 | |||
| 443 | #define LCD_RAM_REGISTER0 (0x00000000U) /*!< LCD RAM Register 0 */ |
||
| 444 | #define LCD_RAM_REGISTER1 (0x00000001U) /*!< LCD RAM Register 1 */ |
||
| 445 | #define LCD_RAM_REGISTER2 (0x00000002U) /*!< LCD RAM Register 2 */ |
||
| 446 | #define LCD_RAM_REGISTER3 (0x00000003U) /*!< LCD RAM Register 3 */ |
||
| 447 | #define LCD_RAM_REGISTER4 (0x00000004U) /*!< LCD RAM Register 4 */ |
||
| 448 | #define LCD_RAM_REGISTER5 (0x00000005U) /*!< LCD RAM Register 5 */ |
||
| 449 | #define LCD_RAM_REGISTER6 (0x00000006U) /*!< LCD RAM Register 6 */ |
||
| 450 | #define LCD_RAM_REGISTER7 (0x00000007U) /*!< LCD RAM Register 7 */ |
||
| 451 | #define LCD_RAM_REGISTER8 (0x00000008U) /*!< LCD RAM Register 8 */ |
||
| 452 | #define LCD_RAM_REGISTER9 (0x00000009U) /*!< LCD RAM Register 9 */ |
||
| 453 | #define LCD_RAM_REGISTER10 (0x0000000AU) /*!< LCD RAM Register 10 */ |
||
| 454 | #define LCD_RAM_REGISTER11 (0x0000000BU) /*!< LCD RAM Register 11 */ |
||
| 455 | #define LCD_RAM_REGISTER12 (0x0000000CU) /*!< LCD RAM Register 12 */ |
||
| 456 | #define LCD_RAM_REGISTER13 (0x0000000DU) /*!< LCD RAM Register 13 */ |
||
| 457 | #define LCD_RAM_REGISTER14 (0x0000000EU) /*!< LCD RAM Register 14 */ |
||
| 458 | #define LCD_RAM_REGISTER15 (0x0000000FU) /*!< LCD RAM Register 15 */ |
||
| 459 | |||
| 460 | #define IS_LCD_RAM_REGISTER(__REGISTER__) (((__REGISTER__) == LCD_RAM_REGISTER0) || \ |
||
| 461 | ((__REGISTER__) == LCD_RAM_REGISTER1) || \ |
||
| 462 | ((__REGISTER__) == LCD_RAM_REGISTER2) || \ |
||
| 463 | ((__REGISTER__) == LCD_RAM_REGISTER3) || \ |
||
| 464 | ((__REGISTER__) == LCD_RAM_REGISTER4) || \ |
||
| 465 | ((__REGISTER__) == LCD_RAM_REGISTER5) || \ |
||
| 466 | ((__REGISTER__) == LCD_RAM_REGISTER6) || \ |
||
| 467 | ((__REGISTER__) == LCD_RAM_REGISTER7) || \ |
||
| 468 | ((__REGISTER__) == LCD_RAM_REGISTER8) || \ |
||
| 469 | ((__REGISTER__) == LCD_RAM_REGISTER9) || \ |
||
| 470 | ((__REGISTER__) == LCD_RAM_REGISTER10) || \ |
||
| 471 | ((__REGISTER__) == LCD_RAM_REGISTER11) || \ |
||
| 472 | ((__REGISTER__) == LCD_RAM_REGISTER12) || \ |
||
| 473 | ((__REGISTER__) == LCD_RAM_REGISTER13) || \ |
||
| 474 | ((__REGISTER__) == LCD_RAM_REGISTER14) || \ |
||
| 475 | ((__REGISTER__) == LCD_RAM_REGISTER15)) |
||
| 476 | |||
| 477 | /** |
||
| 478 | * @} |
||
| 479 | */ |
||
| 480 | |||
| 481 | /** |
||
| 482 | * @} |
||
| 483 | */ |
||
| 484 | |||
| 485 | /* Exported macro ------------------------------------------------------------*/ |
||
| 486 | |||
| 487 | /** @defgroup LCD_Exported_Macros LCD Exported Macros |
||
| 488 | * @{ |
||
| 489 | */ |
||
| 490 | |||
| 491 | /** @brief Reset LCD handle state |
||
| 492 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 493 | * @retval None |
||
| 494 | */ |
||
| 495 | #define __HAL_LCD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LCD_STATE_RESET) |
||
| 496 | |||
| 497 | /** @brief macros to enables or disables the LCD |
||
| 498 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 499 | * @retval None |
||
| 500 | */ |
||
| 501 | #define __HAL_LCD_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR, LCD_CR_LCDEN)) |
||
| 502 | #define __HAL_LCD_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR, LCD_CR_LCDEN)) |
||
| 503 | |||
| 504 | /** @brief Macros to enable or disable the low resistance divider. Displays with high |
||
| 505 | * internal resistance may need a longer drive time to achieve |
||
| 506 | * satisfactory contrast. This function is useful in this case if some |
||
| 507 | * additional power consumption can be tolerated. |
||
| 508 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 509 | * @note When this mode is enabled, the PulseOn Duration (PON) have to be |
||
| 510 | * programmed to 1/CK_PS (LCD_PULSEONDURATION_1). |
||
| 511 | * @retval None |
||
| 512 | */ |
||
| 513 | #define __HAL_LCD_HIGHDRIVER_ENABLE(__HANDLE__) \ |
||
| 514 | do{ \ |
||
| 515 | SET_BIT((__HANDLE__)->Instance->FCR, LCD_FCR_HD); \ |
||
| 516 | LCD_WaitForSynchro(__HANDLE__); \ |
||
| 517 | }while(0) |
||
| 518 | |||
| 519 | #define __HAL_LCD_HIGHDRIVER_DISABLE(__HANDLE__) \ |
||
| 520 | do{ \ |
||
| 521 | CLEAR_BIT((__HANDLE__)->Instance->FCR, LCD_FCR_HD); \ |
||
| 522 | LCD_WaitForSynchro(__HANDLE__); \ |
||
| 523 | }while(0) |
||
| 524 | |||
| 525 | /** |
||
| 526 | * @brief Macro to configure the LCD pulses on duration. |
||
| 527 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 528 | * @param __DURATION__ specifies the LCD pulse on duration in terms of |
||
| 529 | * CK_PS (prescaled LCD clock period) pulses. |
||
| 530 | * This parameter can be one of the following values: |
||
| 531 | * @arg LCD_PULSEONDURATION_0: 0 pulse |
||
| 532 | * @arg LCD_PULSEONDURATION_1: Pulse ON duration = 1/CK_PS |
||
| 533 | * @arg LCD_PULSEONDURATION_2: Pulse ON duration = 2/CK_PS |
||
| 534 | * @arg LCD_PULSEONDURATION_3: Pulse ON duration = 3/CK_PS |
||
| 535 | * @arg LCD_PULSEONDURATION_4: Pulse ON duration = 4/CK_PS |
||
| 536 | * @arg LCD_PULSEONDURATION_5: Pulse ON duration = 5/CK_PS |
||
| 537 | * @arg LCD_PULSEONDURATION_6: Pulse ON duration = 6/CK_PS |
||
| 538 | * @arg LCD_PULSEONDURATION_7: Pulse ON duration = 7/CK_PS |
||
| 539 | * @retval None |
||
| 540 | */ |
||
| 541 | #define __HAL_LCD_PULSEONDURATION_CONFIG(__HANDLE__, __DURATION__) \ |
||
| 542 | do{ \ |
||
| 543 | MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_PON, (__DURATION__)); \ |
||
| 544 | LCD_WaitForSynchro(__HANDLE__); \ |
||
| 545 | }while(0) |
||
| 546 | |||
| 547 | /** |
||
| 548 | * @brief Macro to configure the LCD dead time. |
||
| 549 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 550 | * @param __DEADTIME__ specifies the LCD dead time. |
||
| 551 | * This parameter can be one of the following values: |
||
| 552 | * @arg LCD_DEADTIME_0: No dead Time |
||
| 553 | * @arg LCD_DEADTIME_1: One Phase between different couple of Frame |
||
| 554 | * @arg LCD_DEADTIME_2: Two Phase between different couple of Frame |
||
| 555 | * @arg LCD_DEADTIME_3: Three Phase between different couple of Frame |
||
| 556 | * @arg LCD_DEADTIME_4: Four Phase between different couple of Frame |
||
| 557 | * @arg LCD_DEADTIME_5: Five Phase between different couple of Frame |
||
| 558 | * @arg LCD_DEADTIME_6: Six Phase between different couple of Frame |
||
| 559 | * @arg LCD_DEADTIME_7: Seven Phase between different couple of Frame |
||
| 560 | * @retval None |
||
| 561 | */ |
||
| 562 | #define __HAL_LCD_DEADTIME_CONFIG(__HANDLE__, __DEADTIME__) \ |
||
| 563 | do{ \ |
||
| 564 | MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_DEAD, (__DEADTIME__)); \ |
||
| 565 | LCD_WaitForSynchro(__HANDLE__); \ |
||
| 566 | }while(0) |
||
| 567 | |||
| 568 | /** |
||
| 569 | * @brief Macro to configure the LCD Contrast. |
||
| 570 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 571 | * @param __CONTRAST__ specifies the LCD Contrast. |
||
| 572 | * This parameter can be one of the following values: |
||
| 573 | * @arg LCD_CONTRASTLEVEL_0: Maximum Voltage = 2.60V |
||
| 574 | * @arg LCD_CONTRASTLEVEL_1: Maximum Voltage = 2.73V |
||
| 575 | * @arg LCD_CONTRASTLEVEL_2: Maximum Voltage = 2.86V |
||
| 576 | * @arg LCD_CONTRASTLEVEL_3: Maximum Voltage = 2.99V |
||
| 577 | * @arg LCD_CONTRASTLEVEL_4: Maximum Voltage = 3.12V |
||
| 578 | * @arg LCD_CONTRASTLEVEL_5: Maximum Voltage = 3.25V |
||
| 579 | * @arg LCD_CONTRASTLEVEL_6: Maximum Voltage = 3.38V |
||
| 580 | * @arg LCD_CONTRASTLEVEL_7: Maximum Voltage = 3.51V |
||
| 581 | * @retval None |
||
| 582 | */ |
||
| 583 | #define __HAL_LCD_CONTRAST_CONFIG(__HANDLE__, __CONTRAST__) \ |
||
| 584 | do{ \ |
||
| 585 | MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_CC, (__CONTRAST__)); \ |
||
| 586 | LCD_WaitForSynchro(__HANDLE__); \ |
||
| 587 | } while(0) |
||
| 588 | |||
| 589 | /** |
||
| 590 | * @brief Macro to configure the LCD Blink mode and Blink frequency. |
||
| 591 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 592 | * @param __BLINKMODE__ specifies the LCD blink mode. |
||
| 593 | * This parameter can be one of the following values: |
||
| 594 | * @arg LCD_BLINKMODE_OFF: Blink disabled |
||
| 595 | * @arg LCD_BLINKMODE_SEG0_COM0: Blink enabled on SEG[0], COM[0] (1 pixel) |
||
| 596 | * @arg LCD_BLINKMODE_SEG0_ALLCOM: Blink enabled on SEG[0], all COM (up to 8 |
||
| 597 | * pixels according to the programmed duty) |
||
| 598 | * @arg LCD_BLINKMODE_ALLSEG_ALLCOM: Blink enabled on all SEG and all COM |
||
| 599 | * (all pixels) |
||
| 600 | * @param __BLINKFREQUENCY__ specifies the LCD blink frequency. |
||
| 601 | * @arg LCD_BLINKFREQUENCY_DIV8: The Blink frequency = fLcd/8 |
||
| 602 | * @arg LCD_BLINKFREQUENCY_DIV16: The Blink frequency = fLcd/16 |
||
| 603 | * @arg LCD_BLINKFREQUENCY_DIV32: The Blink frequency = fLcd/32 |
||
| 604 | * @arg LCD_BLINKFREQUENCY_DIV64: The Blink frequency = fLcd/64 |
||
| 605 | * @arg LCD_BLINKFREQUENCY_DIV128: The Blink frequency = fLcd/128 |
||
| 606 | * @arg LCD_BLINKFREQUENCY_DIV256: The Blink frequency = fLcd/256 |
||
| 607 | * @arg LCD_BLINKFREQUENCY_DIV512: The Blink frequency = fLcd/512 |
||
| 608 | * @arg LCD_BLINKFREQUENCY_DIV1024: The Blink frequency = fLcd/1024 |
||
| 609 | * @retval None |
||
| 610 | */ |
||
| 611 | #define __HAL_LCD_BLINK_CONFIG(__HANDLE__, __BLINKMODE__, __BLINKFREQUENCY__) \ |
||
| 612 | do{ \ |
||
| 613 | MODIFY_REG((__HANDLE__)->Instance->FCR, (LCD_FCR_BLINKF | LCD_FCR_BLINK), ((__BLINKMODE__) | (__BLINKFREQUENCY__))); \ |
||
| 614 | LCD_WaitForSynchro(__HANDLE__); \ |
||
| 615 | }while(0) |
||
| 616 | |||
| 617 | /** @brief Enables or disables the specified LCD interrupt. |
||
| 618 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 619 | * @param __INTERRUPT__ specifies the LCD interrupt source to be enabled or disabled. |
||
| 620 | * This parameter can be one of the following values: |
||
| 621 | * @arg LCD_IT_SOF: Start of Frame Interrupt |
||
| 622 | * @arg LCD_IT_UDD: Update Display Done Interrupt |
||
| 623 | * @retval None |
||
| 624 | */ |
||
| 625 | #define __HAL_LCD_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ |
||
| 626 | do{ \ |
||
| 627 | SET_BIT((__HANDLE__)->Instance->FCR, (__INTERRUPT__)); \ |
||
| 628 | LCD_WaitForSynchro(__HANDLE__); \ |
||
| 629 | }while(0) |
||
| 630 | #define __HAL_LCD_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ |
||
| 631 | do{ \ |
||
| 632 | CLEAR_BIT((__HANDLE__)->Instance->FCR, (__INTERRUPT__)); \ |
||
| 633 | LCD_WaitForSynchro(__HANDLE__); \ |
||
| 634 | }while(0) |
||
| 635 | |||
| 636 | /** @brief Checks whether the specified LCD interrupt is enabled or not. |
||
| 637 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 638 | * @param __IT__ specifies the LCD interrupt source to check. |
||
| 639 | * This parameter can be one of the following values: |
||
| 640 | * @arg LCD_IT_SOF: Start of Frame Interrupt |
||
| 641 | * @arg LCD_IT_UDD: Update Display Done Interrupt. |
||
| 642 | * @note If the device is in STOP mode (PCLK not provided) UDD will not |
||
| 643 | * generate an interrupt even if UDDIE = 1. |
||
| 644 | * If the display is not enabled the UDD interrupt will never occur. |
||
| 645 | * @retval The state of __IT__ (TRUE or FALSE). |
||
| 646 | */ |
||
| 647 | #define __HAL_LCD_GET_IT_SOURCE(__HANDLE__, __IT__) (((__HANDLE__)->Instance->FCR) & (__IT__)) |
||
| 648 | |||
| 649 | /** @brief Checks whether the specified LCD flag is set or not. |
||
| 650 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 651 | * @param __FLAG__ specifies the flag to check. |
||
| 652 | * This parameter can be one of the following values: |
||
| 653 | * @arg LCD_FLAG_ENS: LCD Enabled flag. It indicates the LCD controller status. |
||
| 654 | * @note The ENS bit is set immediately when the LCDEN bit in the LCD_CR |
||
| 655 | * goes from 0 to 1. On deactivation it reflects the real status of |
||
| 656 | * LCD so it becomes 0 at the end of the last displayed frame. |
||
| 657 | * @arg LCD_FLAG_SOF: Start of Frame flag. This flag is set by hardware at |
||
| 658 | * the beginning of a new frame, at the same time as the display data is |
||
| 659 | * updated. |
||
| 660 | * @arg LCD_FLAG_UDR: Update Display Request flag. |
||
| 661 | * @arg LCD_FLAG_UDD: Update Display Done flag. |
||
| 662 | * @arg LCD_FLAG_RDY: Step_up converter Ready flag. It indicates the status |
||
| 663 | * of the step-up converter. |
||
| 664 | * @arg LCD_FLAG_FCRSF: LCD Frame Control Register Synchronization Flag. |
||
| 665 | * This flag is set by hardware each time the LCD_FCR register is updated |
||
| 666 | * in the LCDCLK domain. |
||
| 667 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
||
| 668 | */ |
||
| 669 | #define __HAL_LCD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) |
||
| 670 | |||
| 671 | /** @brief Clears the specified LCD pending flag. |
||
| 672 | * @param __HANDLE__ specifies the LCD Handle. |
||
| 673 | * @param __FLAG__ specifies the flag to clear. |
||
| 674 | * This parameter can be any combination of the following values: |
||
| 675 | * @arg LCD_FLAG_SOF: Start of Frame Interrupt |
||
| 676 | * @arg LCD_FLAG_UDD: Update Display Done Interrupt |
||
| 677 | * @retval None |
||
| 678 | */ |
||
| 679 | #define __HAL_LCD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLR = (__FLAG__)) |
||
| 680 | |||
| 681 | /** |
||
| 682 | * @} |
||
| 683 | */ |
||
| 684 | |||
| 685 | /* Exported functions ------------------------------------------------------- */ |
||
| 686 | |||
| 687 | /** @addtogroup LCD_Exported_Functions |
||
| 688 | * @{ |
||
| 689 | */ |
||
| 690 | |||
| 691 | /** @addtogroup LCD_Exported_Functions_Group1 |
||
| 692 | * @{ |
||
| 693 | */ |
||
| 694 | |||
| 695 | /* Initialization/de-initialization methods **********************************/ |
||
| 696 | HAL_StatusTypeDef HAL_LCD_DeInit(LCD_HandleTypeDef *hlcd); |
||
| 697 | HAL_StatusTypeDef HAL_LCD_Init(LCD_HandleTypeDef *hlcd); |
||
| 698 | void HAL_LCD_MspInit(LCD_HandleTypeDef *hlcd); |
||
| 699 | void HAL_LCD_MspDeInit(LCD_HandleTypeDef *hlcd); |
||
| 700 | |||
| 701 | /** |
||
| 702 | * @} |
||
| 703 | */ |
||
| 704 | |||
| 705 | /** @addtogroup LCD_Exported_Functions_Group2 |
||
| 706 | * @{ |
||
| 707 | */ |
||
| 708 | |||
| 709 | /* IO operation methods *******************************************************/ |
||
| 710 | HAL_StatusTypeDef HAL_LCD_Write(LCD_HandleTypeDef *hlcd, uint32_t RAMRegisterIndex, uint32_t RAMRegisterMask, uint32_t Data); |
||
| 711 | HAL_StatusTypeDef HAL_LCD_Clear(LCD_HandleTypeDef *hlcd); |
||
| 712 | HAL_StatusTypeDef HAL_LCD_UpdateDisplayRequest(LCD_HandleTypeDef *hlcd); |
||
| 713 | |||
| 714 | /** |
||
| 715 | * @} |
||
| 716 | */ |
||
| 717 | |||
| 718 | /** @addtogroup LCD_Exported_Functions_Group3 |
||
| 719 | * @{ |
||
| 720 | */ |
||
| 721 | |||
| 722 | /* Peripheral State methods **************************************************/ |
||
| 723 | HAL_LCD_StateTypeDef HAL_LCD_GetState(LCD_HandleTypeDef *hlcd); |
||
| 724 | uint32_t HAL_LCD_GetError(LCD_HandleTypeDef *hlcd); |
||
| 725 | |||
| 726 | /** |
||
| 727 | * @} |
||
| 728 | */ |
||
| 729 | |||
| 730 | /** |
||
| 731 | * @} |
||
| 732 | */ |
||
| 733 | |||
| 734 | /** @addtogroup LCD_Private_Functions |
||
| 735 | * @{ |
||
| 736 | */ |
||
| 737 | |||
| 738 | /* Private functions ---------------------------------------------------------*/ |
||
| 739 | HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd); |
||
| 740 | |||
| 741 | /** |
||
| 742 | * @} |
||
| 743 | */ |
||
| 744 | |||
| 745 | /** |
||
| 746 | * @} |
||
| 747 | */ |
||
| 748 | |||
| 749 | #endif /* STM32L100xB || STM32L100xBA || STM32L100xC ||... || STM32L162xD || STM32L162xE || STM32L162xDX */ |
||
| 750 | |||
| 751 | /** |
||
| 752 | * @} |
||
| 753 | */ |
||
| 754 | |||
| 755 | #ifdef __cplusplus |
||
| 756 | } |
||
| 757 | #endif |
||
| 758 | |||
| 759 | #endif /* __STM32L1xx_HAL_LCD_H */ |
||
| 760 | |||
| 761 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |